STATE BOARD OF TECHNICAL EDUCATION AND ......Engg mathematics-i C16 AA-102 Engg mathematics-i 3 C09...
Transcript of STATE BOARD OF TECHNICAL EDUCATION AND ......Engg mathematics-i C16 AA-102 Engg mathematics-i 3 C09...
STATE BOARD OF TECHNICAL EDUCATION AND TRAINING TELANGANA :: HYDERABAD
From:Sri UVSN MURTHY, M.TECH.,Secretary,State Board of Technical Educaton and Training, Telangana, S.V. Bhavan, Masab Tank,Hyderabad- 500028
To:The Principals of all Polytechnics,(Including Govt., Aided, Private Polytechnics and Second Shif Polytechnics in Engineering Colleges).
Sir,Sub: SBTET – Pre Exams –Diploma Supplementary Examinatons in the Schemes of C
09-(3 ½ years Pin Starts with 13) C14, C16/C16S/C18 and ER 91 and Regular (ER-91 – I Year) –June-2020 –Noticaton issued -Regarding.
Ref: 1. Board Resoluton No 9-03/2020, Dated: 30-01-2020 2. UO Note SBTET-B/CD/CD-1/3/2018-ACADEMIC SECTION – 1, 21-3-2020
***1. With reference to the subject cited above, I furnish herewith the detailed noticaton
invitng applicatons from the eligible candidates of C 09 (Pin Starts with 13) - (3 ½ Years)C-14, C-16, C16S, C18 and ER 91 (II Year) to appear for Supplementary and Regular (ER-91 – I Year), commencing in June -2020.
2. As per the Board Resoluton cited in the reference & recommendaton of Academiccommitee it was decided to ratonalize the subjects of various schemes i,e., C-09, C-14,C-16 and C16S into one scheme(C-16/C-16S) for issue of single queston paper forSupplementary examinaton as per the subject mapping shown in Annexure I & II. TheStudents should write the examinatons as per the syllabus of mapped subjects only.Students can download the syllabus details of the mapped subjects fromsbtet.telangana.gov.in noticatons.
3. In this regard, it is informed that the candidates who wish to appear for theexaminatons can register Online at sbtet.telangana.gov.in for the Examinaton bymaking Payment of prescribed Fee online. The hall tckets can be downloaded andprinted from the same portal. The candidate has to obtain the signature on the HallTicket from the concerned Head of Secton/Principal before appearing for theexaminaton.
4. Before remitting the fee, the candidate shall ensure the eligibility status,since fee once paid is not refundable,
5. All the Principals are requested to give the necessary instructons to the Head ofSectons to sign on the hall tckets obtained from SBTET ofcial website.
6. The examinatons will be conducted for the following courses and Schemes:
S.N Course Class/Year Scheme
1 CH/FW/MET/TT All Semesters C 09
2A/ AA/ AEI/C/ CM/ CCP/CH /CHST/CT /FW/ EC/EE /GT/HS/HMCT/ IT/ M/ MET/ MNG/ PKG/ TT
1st Year, 3rd, 4th, 5th 6th and 7th semester
C14
3A/AA/C/CM/CCP/CH/CHST /CT/ FW /EC /EE / EI/GT/HS/ HMCT/ IT/ M/ MET/ MNG/ PKG/ TT
1st Year, 3rd, 4th, 5th 6th 7th semester
C16
4A/ AA/ C/ CM/ CCP/CH / CHST / CT/FW/ EC/ EE/EI/ GT/HS/HMCT/ IT/ M/ MET/ MNG/PKG/TT
1st ,2nd, 3rd, 4th 5th Semester
C16S
5
I. A/ AA/C/CM/ CCP/CH / FW/ EC/ EE/ EI/ GT/HS/HMCT/ M/ MET/ MNG/PKG/TT(Pin starts with 18)
1st ,2 nd , 3rd, Semester
C 18
II. A/ AA/C/CM/ CCP/CH / FW/ EC/
File No.SBTET-EE-2/DE-2/16/2019-EE-2
EE/EI/GT/HS/HMCT/ M/ MET/ MNG/PKG/TT/BM/ES/EV/PT (Pin Starts with 19)
1st Semester only
6 Pharmacy 1st year & 2nd year ER-91.7. Eligibility Criteria: The candidates of the following Schemes/ Courses/Year are eligible for June -2020
Diploma Examinatons:A. Regular Exams:
S.No. Scheme Class/Year
1 ER-91 a) Candidates admited in ER-91 Pharmacy 2 years course during the AY 2019-20 (PIN Starts with : 19)
B. SUPPLEMENTARY EXAMS::S.No. Scheme Class/Year Remarks
1 C-09 Scheme a) 3 ½ years course: Candidates admited in C-09 schemeduring the academic year 2013-14(PIN Starts with 13)
C-09, C-14 schemes Ratonalized to C 16/C- 16S Scheme.
2 C-14 Scheme a) 3 Years course: Candidate admited during theacademic year 2014-15 & 2015-16 (Pin Starts with 14 &15)
b) 3 ½ Years course: Candidate admited during the academic year 2014-15 & 2015-16 (Pin Starts with 14 & 15)c) IVC Candidates admited in C-14 during
academic year 2016-17 (Pin Starts with 15)
3 C 16 Scheme a) 3 Years course: Candidate admited during theacademic year 2016-17 (Pin Starts with 16)
b) 3½ years course: Candidate admited during theacademic year 2016-17 (Pin Starts with 16)
c) IVC Candidates admited in C-16 during academic year 2017-18 (Pin Starts with 16)
4 C16S scheme a) 3 Years course: Candidate admited during theacademic year 2017-18 (Pin Starts with 17)
b) 3 ½ Years course: Candidate admited during theacademic year 2017- 18 (Pin Starts with 17).
c)) IVC Candidates admited in C16s during academic year 2018-19 (Pin Starts with 17)
5 C 18 Scheme a) 3 Years course: Candidate admited during theacademic year 2018-19 & 2019-20 (Pin Starts with 18and 19)
--
5 ER 91 Scheme
Candidates admited in ER-91 Pharmacy 2 years courseduring the AY 2016-17,2017-18 and 2018-19 batches (PinStarts with 16 & 17 and 18)
--
8. Examinaton ScheduleI Commencement of theory examinatons. JUNE -2020
II Date of Commencement for payment of examinaton feethrough Online.
20-04-2020 (Monday)
III Last date for payment of examinaton fee without penalty to all candidates.
12-05-2020 (Tuesday)
IV Last date for payment of examinaton fee with penalty to all candidates.
15-05-2020 (Friday)
V Last date for payment of examinaton fee and submission of applicaton form (UNDER TATKAL SCHEME)
18-05-2020 (Monday)
File No.SBTET-EE-2/DE-2/16/2019-EE-2
9. Fee Details i Fee for whole or part examinaton per year/semester. Rs. 550/-
ii a) Late Fee (penalty)b) Tatkal scheme (Including Examinaton fee).
Rs. 400/-Rs. 3,000/-
Iii Assessment fee for Industrial Training Rs. 550/-iv. Fee for whole or part examination for pharmacy course Rs. 675/-
NOTE:
1. Acceptance of examinaton fee does not provide any right to the candidate todemand for the issue of Hall Ticket.
2. Detailed Time-Table of examinatons shall be communicated in due course.3. Examinaton fee can only be paid through payment gateway i.e. Debit
Card/Credit Card/Net Banking for all Diploma subjects.4. Fee once paid will not be refunded or adjusted under any circumstances.5. A student, who is not eligible to sit for examinaton for any of the reason, shall
forfeit the Examinaton Fee paid.
6. The URL for online fee payment and hall tcket download sbtet.telangana.gov.in 7. The candidates who have availed Regular exam during May 2020 are not eligible.8. C 09/C 14 schemes are rationalized to C 16/C16S scheme. Therefore candidates are
inform to study the C16/C16S syllabus for the mapped subjects as per the annexure I&II
The receipt of this leter together with Noticaton may please be acknowledged.
Yours faithfully,
SECRETARY Copy Submited to: The C T E Telangana, Hyderabad for favour of kind informaton. The Joint Director(Admn), O/o DTE Hyderabad TS for favour of kind informaton. The Regional Joint Director (TE) Hyderabad for favour of kind informaton. All the ofcers in the SBTET, TS for informaton. Copy to Secretary Peshi, Accounts, System Analyst, B Secton, EE-I Secton.
File No.SBTET-EE-2/DE-2/16/2019-EE-2
Annexure-I (Mapping subjects)SlNo.
Scheme
Branch
Subject_
CodeSubject Name
Equivalent
Scheme
EquivalentSubjectCode
Equivalent SubjectName
1 C09 AAAA-101
English - I C16 AA-101 English - I
2 C09 AAAA-102
Engg mathematics-i C16 AA-102 Engg mathematics-i
3 C09 AAAA-103
Engineering Physics C16 AA-103 Engineering Physics
4 C09 AAAA-104
Engineering Chemistry and Environmental Studies
C16 AA-104
Engineering Chemistry and Environmental Studies
5 C09 AAAA-105
Building Materials C16 AA-105 Building Materials
6 C09 AAAA-106
Basic Design C16 AA-106 Basic Design
7 C09 AAAA-107
Geometrical Drawing
C16 AA-107Engineering Drawing
8 C14 AAAA-101
ENGLISH C16 AA-101 ENGLISH
9 C14 AAAA-102
ENGINEERING MATHEMATICS - I
C16 AA-102ENGINEERING MATHEMATICS - I
10 C14 AAAA-103
ENGINEERING PHYSICS
C16 AA-103ENGINEERING PHYSICS
11 C14 AAAA-104
ENGINEERING CHEMISTRY ANDENVIRONMENTAL STUDIES
C16 AA-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
12 C14 AAAA-105
BUILDING MATERIAL
C16 AA-105 Building Materials
13 C14 AAAA-106
BASIC DESIGN C16 AA-106 Basic Design
14 C14 AAAA-107
ARCHITECTURAL GRAPHICS
C16 AA-107Engineering Drawing
15 C09 AAAA-302
Engineering Mathematics - II
C16S AA-301Engineering Mathematics - III
16 C09 AAAA-303
History of Architecture - I
C16S AA-302HISTORY OF ARCHITECTURE-I
17 C09 AAAA-304
Engineering Mechanics
C16S AA-303ENGINEERING MECHANICS
18 C09 AAAA-305
Surveying C16S AA-304 SURVEYING
19 C09 AAAA-306
Architectural Design-I
C16S AA-306ARCHITECTURAL DESIGN -I
20 C09 AAAA-308
Perspective Drawing
C16S AA-307PERSPECTIVE DRAWING
21 C09 AAAA-402
History of Architecture - II
C16S AA-402HISTORY OF ARCHITECTURE-II
22 C09 AAAA-403
Theory of Structures
C16S AA-403THEORY OF STRUCTURES
File No.SBTET-EE-2/DE-2/16/2019-EE-2
23 C09 AAAA-404
Specifications and Estimations
C16S AA-404SPECIFICATIONS &ESTIMATION
24 C09 AAAA-405
Architectural Design-II
C16S AA-406ARCHITECTURAL DESIGN –II
25 C09 AAAA-406
Computer Aided Design and Draughting Lab
C16S AA-409CAD LAB PRACTICE- II
26 C09 AAAA-407
Building construction Drawing
C16S AA-405BUILDING CONSTRUCTION DRAWING
27 C09 AAAA-602
Enterpreneurship and Project Management
C16S AA-501ENTREPRENEURSHIP & PROJECT MANAGEMENT
28 C09 AAAA-603
Structural Design C16S AA-503 STRUCTURAL DESIGN
29 C09 AAAA-604
Building Services C16S AA-401BUILDING SERVICES
30 C09 AAAA-
605(A)
Urban Planning andLegislation
C16S AA-505A URBAN PLANNING
31 C09 AAAA-
605(B)
Construction Failures, Repairs and Maintenance
C16S AA-504
CONSTRUCTION FAILURES, REPAIRS & MAINTENANCE
32 C14 AAAA-301
Engineering Mathematics – II
C16S AA-301Engineering Mathematics – III
33 C14 AAAA-302
History of Indian Architecture
C16S AA-302HISTORY OF ARCHITECTURE-I
34 C14 AAAA-303
Engineering Mechanics
C16S AA-303ENGINEERING MECHANICS
35 C14 AAAA-304
Surveying C16S AA-304 SURVEYING
36 C14 AAAA-305
Building Specifications
C16S AA-404SPECIFICATIONS &ESTIMATION
37 C14 AAAA-306
Architectural Design – I
C16S AA-306ARCHITECTURAL DESIGN -I
38 C14 AAAA-307
Building Construction Drawing-I
C16S AA-310SURVEYING LAB PRACTICE
39 C14 AAAA-308
Interior and Landscape Design
C16S AA-407INTERIOR & LANDSCAPE DESIGN
40 C14 AAAA-401
Engineering Mathematics-III
C16S AA-401Engineering Mathematics-IV
41 C14 AAAA-402
History of World Architecture
C16S AA-402HISTORY OF ARCHITECTURE-II
42 C14 AAAA-403
Theory of Structures
C16S AA-403THEORY OF STRUCTURES
43 C14 AAAA-404
Urban Planning C16S AA-505A URBAN PLANNING
44 C14 AAAA-405
Quantity Survey C16S AA-404SPECIFICATIONS &ESTIMATION
File No.SBTET-EE-2/DE-2/16/2019-EE-2
45 C14 AAAA-406
Architectural Design-II
C16S AA-406ARCHITECTURAL DESIGN –II
46 C14 AAAA-407
Building Construction Drawing-II
C16S AA-405BUILDING CONSTRUCTION DRAWING
47 C14 AAAA-601
Entrepreneurship and Project Management
C16S AA-501Entrepreneurship and Project Management
48 C14 AAAA-602
History of Modern Architecture
C16S AA-502HISTORY OF ARCHITECTURE-III
49 C14 AAAA-603
Professional Practice & BuildingBye-laws
C16S AA-505BPROFESSIONAL PRACTICE
50 C14 AAAA-604
Structural Design C16S AA503 STRUCTURAL DESIGN
51 C14 AAAA-605
Building Services Drawing Lab
C16S AA-507WORKING DRAWINGS LAB PRACTICE
52 C14 AAAA-606
Design Practice Lab C16S AA-409CAD LAB PRACTICE- II
53 C14 AAAA-607
Working DrawingsPractice Lab
C16S AA-507WORKING DRAWINGS LAB PRACTICE
54 C14 AAAA-608
Construction Practice Lab
C16S AA-508CONSTRUCTION LAB PRACTICE
55 C09 A A-101 English - I C16 A-101 English - I
56 C09 A A-102Engineering Mathematics - I
C16 A-102Engineering Mathematcs - I
57 C09 A A-103 Engineering Physics C16 A-103 Engineering Physics
58 C09 A A-104
Engineering Chemistry and Environmental Studies
C16 A-104Engineering Chemistry and Environmental Studies
59 C09 A A-105Workshop Technology
C16 A-106Workshop Technology
60 C09 A A-107 Engineering Drawing C16 A-107Engineering Drawing
61 C14 A A-101 ENGLISH C16 A-101 ENGLISH
62 C14 A A-102ENGINEERING MATHEMATICS - I
C16 A-102ENGINEERING MATHEMATICS - I
63 C14 A A-103ENGINEERING PHYSICS
C16 A-103ENGINEERING PHYSICS
64 C14 A A-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
C16 A-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
65 C14 A A-105ENGINEERING MECHANICS
C16S A-302Engineering Mechanics
66 C14 A A-106WORKSHOP TECHNOLOGY
C16 A-106Workshop Technology
67 C14 A A-107ENGINEERING DRAWING
C16 A-107Engineering Drawing
68 C09 A A-302Engineering Mathematics - II
C16S A-301Engineering Mathematics - III
File No.SBTET-EE-2/DE-2/16/2019-EE-2
69 C09 A A-303 Thermal Engineering C16S A-303 Thermal Engineering
70 C09 A A-304Automobile Power Plants
C16S A-305Automobile Engineering-I
71 C09 A A-305Automobile Transmission systems
C16S A-305Automobile Engineering-I
72 C09 A A-307 Machine Drawing C16S A-307 Machine Drawing
73 C09 A A-402Basic Mechanical Engineering
C16S A-302Engineering Mechanics
74 C09 A A-403Strength of Materials and Fluid Mechanics
C16S A-402Strength of Materials & Fluid Mechanics
75 C09 A A-404Automobile Chassis & Body Engineering
C16S A-404Automobile Body Engineering
76 C09 A A-405Automobile ElectricalSystems
C16S A-306Automobile Electrical & Electronic Systems
77 C09 A A-406Automobile Servicing& Maintenance
C16S A-406Automobile Servicing and Maintenance
78 C09 A A-602Industrial Management and Enterpreneurship
C16S A-501Industrial Management & Entrepreneurship
79 C09 A A-603Design of Machine Elements
C16S A-502Design of Machine Elements
80 C09 A A-604Motor Transport Organisation
C16S A-503Motor Transport Organisation
81 C09 A A-605Production Technology
C16S A-505Production Technology
82 C09 AA-
606(A)Special Purpose Vehicles
C16S A-506(C) Special Purpose Vehicles
83 C09 AA-
606(B)Alternate Fuels and Emission Control
C16S A-506(B)Alternative Fuels and Emission Control
84 C09 AA-
606('C)Automobile Air Conditioning
C16S A-506(A)Automobile Air Conditioning
85 C09 A A-607Automobile Engineering Drawing
C16S A-507Automobile Engineering Drawing
86 C14 A A-301Engineering Mathematics-II
C16S A-301Engineering Mathematics-III
87 C14 A A-302Automobile Electricaland Electronics Systems
C16S A-306Automobile Electrical & Electronic Systems
88 C14 A A-303Automobile Power Plants
C16S A-305Automobile Engineering-I
89 C14 A A-304 Automobile Transmission Systems
C16S A-305Automobile Engineering-I
90 C14 A A-305 Engineering Materials C16S A-304 Engineering Materials91 C14 A A-306 Thermal Engineering C16S A-303 Thermal Engineering92 C14 A A-307 Machine Drawing C16S A-307 Machine Drawing
93 C14 A A-401Engineering Mathematics-III
C16S A-401Engineering Mathematics-IV
94 C14 A A-402Strength of Materials and Fluid Mechanics
C16S A-402Strength of Materials & Fluid Mechanics
95 C14 A A-403 Automobile Chassis C16S A-403Automobile Engineering-II
96 C14 A A-404Automobile Body Engineering
C16S A-404Automobile Body Engineering
File No.SBTET-EE-2/DE-2/16/2019-EE-2
97 C14 A A-405Manufacturing Processes
C16S A-405Manufacturing Processes
98 C14 A A-406Combustion and Fuel Systems
C16S A-305Automobile Engineering-I
99 C14 A A-501Industrial Management and Entrepreneurship
C16S A-501Industrial Management & Entrepreneurship
100 C14 A A-502
Design of Machine Elements
C16S A-502 Design of Machine Elements
101 C14 A A-503
Automobile Servicingand maintenance
C16S A-406 Automobile Servicing and Maintenance
102 C14 A A-504
Production Technology
C16S A-505 Production Technology
103 C14 A A-505
Special Purpose Vehicles
C16SA-
506(C)Special Purpose Vehicles
104 C14 A A-506
Motor Transport Organization
C16S A-503 Motor Transport Organisation
105 C09 CCP
CCP-101
English - I C16 CCP-101 English - I
106 C09 CCP
CCP-102
Accountancy-I C16 CCP-102 Accountancy-I
107 C09 CCP
CCP-104
Business Organisation C16 CCP-104 Business Organisation
108 C09 CCP
CCP-105
Fundamentals of I.T. C16 CCP-105Information Technology - I
109 C09 CCP
CCP-107
English Typewriting I
30 WPMC16 CCP-107
English Typewriting I 30 Wpm
110 C09 CCP
CCP-108
English Typewriting II
C16 CCP-108 English Typewriting Ii
111 C14 CCP
CCP-101
ENGLISH-I C16 CCP-101 English - I
112 C14 CCP
CCP-102
ACCOUNTANCY-I C16 CCP-102 Accountancy-I
113 C14 CCP
CCP-103
ENGLISH SHORTHAND-I
C16 CCP-103 English Shorthand-I
114 C14 CCP
CCP-104
BUSSINESS ORGANISATION-I
C16 CCP-104 Business Organisation
115 C14 CCP
CCP-105
FUNDAMENTALS OF IT
C16 CCP-105Information Technology - I
116 C14 CCP
CCP-106
COMPUTER PACKAGES-I
C16 CCP-105Information Technology - I
117 C14 CCP
CCP-107
ENGLISH TYPEWRITING-I
C16 CCP-107English Typewriting I 30 Wpm
118 C14 CCP
CCP-108
ENGLISH TYPEWRITING-II
C16 CCP-108English Typewriting II
119 C09 CCP
CCP-301
English - II C16S CCP-301 English - III
120 C09 CCP
CCP-302
Accountancy-II C16S CCP-402 Accountancy-IV
121 C09 CCP
CCP-304
Computer Packages C16S CCP-305Information Technology - III
122 C09 CCP
CCP-308A
English Typewriting –Paper I (45wpm)
C16S CCP-307AEnglish Typewriting –I (45wpm)
12 C09 CCP CCP- Telugu Typewriting – C16S CCP-307B Telugu Typewriting –
File No.SBTET-EE-2/DE-2/16/2019-EE-2
3 308BI(25 wpm) I (25 wpm)
124 C09 CCP
CCP-309A
English Typewriting –Paper II
C16S CCP-308AEnglish Typewriting –II
125 C09 CCP
CCP-309B
Telugu Typewriting –II C16S CCP-308B
Telugu Typewriting –II
126 C09 CCP
CCP-401
English - III C16S CCP-401 English - IV
127 C09 CCP
CCP-402
Accountancy-III C16S CCP-302 Accountancy-III
128 C09 CCP
CCP-403
QuantitativeTechniques-I C16S CCP-403
Quantitative Techniques-I
129 C09 CCP
CCP-404
Visual Basic C16S CCP-506 Visual Basic
130 C09 CCP
CCP-601
English - IV C16S CCP-501 English - V
131 C09 CCP
CCP-602
Business Economics
C16S CCP-504Business Economics and Environment
132 C09 CCP
CCP-603
QuantitativeTechniques-II
C16S CCP-503Quantitative Techniques-II
133 C09 CCP
CCP-604
Principles of Marketing
C16S CCP-502 Marketing
134 C09 CCP
CCP-605(A
)
(A) Human ResourcesManagement
C16S CCP-505AHuman Resource Management
135 C09 CCP
CCP-605(B
)(B) Banking
C16S CCP-404 Banking
136 C09 CCP
CCP-605(C
)(C) Insurance C16S CCP-505B Insurance
137 C14 CCP
CCP-301
English-II C16S CCP-301 English - III
138 C14 CCP
CCP-302
Accountancy-II C16S CCP-302 Accountancy-III
139 C14 CCP
CCP-303
English Shorthand-II C16S CCP-303 English Shorthand-III
140 C14 CCP
CCP-304
Business Organisation-II
C16 CCP-104 Business Organisation
141 C14 CCP
CCP-305
Office Organisation C16 CCP-106 Office Organisation
142 C14 CCP
CCP-306
Computer Packages-II C16S CCP-305Information Technology - III
143 C14 CCP
CCP-401
English-III C16S CCP-401 English - IV
144 C14 CCP
CCP-402
Accountancy-III C16S CCP-402 Accountancy-IV
145 C14 CCP
CCP-403
Quantitative Techniques-I
C16S CCP-403Quantitative Techniques-I
146 C14 CCP
CCP-404
Business Correspondence
C16S CCP-304Business Correspondence
14 C14 CCP CCP- 'C' Programming C16S CCP-405 ‘C’ Programming
File No.SBTET-EE-2/DE-2/16/2019-EE-2
7 406
148 C14 CCP
CCP-407
English Typewriting-I (45 wpm)
C16S CCP-307AEnglish Typewriting –I (45wpm)
149 C14 CCP
CCP-408
English Typewriting-II (45 wpm)
C16S CCP-308AEnglish Typewriting –II
150 C14 CCP
CCP-409
English Shorthand (80 wpm)
C16S CCP-407English Shorthand (80 wpm)
151 C14 CCP
CCP-501
ENGLISH-IV C16S CCP-501 English - V
152 C14 CCP
CCP-502
BUSINESSECONOMICS & ENV.-I C16S CCP-504
Business Economics and Environment
153 C14 CCP
CCP-503
QUANTITATIVETECHNIQUES- II C16S CCP-503
Quantitative Techniques-II
154 C14 CCP
CCP-504
BANKING-I C16S CCP-404 Banking
155 C14 CCP
CCP-505
VISUAL BASIC C16S CCP-506 Visual Basic
156 C14 CCP
CCP-506(A)
TELUGU TW-I (25 WPM) C16S CCP-307B
Telugu Typewriting – I (25 wpm)
157 C14 CCP
CCP-507(A)
TELUGU TW-II (25 WPM C16S CCP-308B
Telugu Typewriting –II
158 C14 CCP
CCP-601
ENGLISH-V C16S CCP-501 English - V
159 C14 CCP
CCP-602
BUSINESS ECONOMICS & ENV-II
C16S CCP-504Business Economics and Environment
160 C14 CCP
CCP-603
MARKETING C16S CCP-502 Marketing
161 C14 CCP
CCP-604
BANKING-II C16S CCP-404 Banking
162 C14 CCP
CCP-605A
HUMAN RESOURCES MANAGEMENT
C16S CCP-505AHuman Resource Management
163 C14 CCP
CCP-605B
INSURANCE C16S CCP-505B Insurance
164 C09 C C-101 English - I C16 C-101 English - I
165 C09 C C-102
Engineering Mathematics - I
C16 C-102Engineering Mathematics - I
166 C09 C C-103 Engineering Physics C16 C-103 Engineering Physics
167 C09 C C-104
Engineering Chemistry and Environmental Studies
C16 C-104
Engineering Chemistry and Environmental Studies
168 C09 C C-105 Surveying - I C16 C-106 Surveying - I
169 C09 C C-106
Engineering Mechanics
C16 C-105Engineering Mechanics
170 C09 C C-107
Engineering Drawing
C16 C-107Engineering Drawing
171 C14 C C-101 ENGLISH C16 C-101 ENGLISH
172 C14 C C-102 ENGINEERING C16 C-102 ENGINEERING
File No.SBTET-EE-2/DE-2/16/2019-EE-2
MATHEMATICS - I
MATHEMATICS - I
173 C14 C C-103
ENGINEERING PHYSICS
C16 C-103ENGINEERING PHYSICS
174 C14 C C-104
ENGINEERING CHEMISTRY ANDENVIRONMENTAL STUDIES
C16 C-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
175 C14 C C-105
ENGINEERING MECHANICS
C16 C-105ENGINEERING MECHANICS
176 C14 C C-106 SURVEYING-I C16 C-106 SURVEYING-I
177 C14 C C-107
ENGINEERING DRAWING
C16 C-107Engineering Drawing
178 C09 C C-302
Engineering Mathematics - II
C16S C-301Engineering Mathematics - III
179 C09 C C-303
Strength of Materials and Theory of Structures
C16S C-302 Strength of Materials
180 C09 C C-304 Hydraulics C16S C-404 Hydraulics
181 C09 C C-305 Surveying - II C16S C-306 Surveying – III
182 C09 C C-306
Construction Materials
C16S C-303Construction Materials
183 C09 C C-307
Civil Engineering Drawing - I
C16S C-307Civil Engineering Drawing –I
184 C09 C C-402 R.C. Structures C16S C-501
Reinforced Concrete Structures
185 C09 C C-403
Irrigation Engineering
C16S C-406 Irrigation Engineering
186 C09 C C-405
Environmental Engineering - I
C16S C-305Environmental Engineering –I
187 C09 C C-406
Construction Practice
C16S C-304 Construction Practice
188 C09 C C-407
Civil Engineering Drawing - II
C16S C-407Civil Engineering Drawing -II
189 C09 C C-602 Steel Structures C16S C-502
Design of Steel Structures
190 C09 C C-603
Construction & Quality Management
C16S C-504Construction Management & Entrepreneurship
191 C09 C C-604
Transportation Engineering
C16S C-505Transportation Engineering
192 C09 C C-605
Environmental Engineering - II
C16S C-405Environmental Engineering-II
193 C09 C
C-606A
Low Cost Housing, Rural Water Suppy and Sanitation
C16S C-506(A) Low Cost Housing, Rural Water Supply &Sanitation
194 C09 C
C-606B
Geo Technical Engineering
C16S C-506(B) Geo-Technical Engineering
19 C09 C C- Maintenance of C16S C-506(C) Maintenance of
File No.SBTET-EE-2/DE-2/16/2019-EE-2
5 606C Buildings Buildings
196 C09 C C-607
Structural Engineering Drawing
C16S C-507Structural EngineeringDrawing
197 C14 C C-301
Engineering Mathematics - II
C16S C-301Engineering Mathematics - III
198 C14 C C-302 Mechanics of Solids C16S C-302 Strength of Materials
199 C14 C C-303 Hydraulics C16S C-404 Hydraulics
200 C14 C C-304 Surveying - II C16S C-206 SURVEYING-II
201 C14 C C-305
Construction Materials
C16S C-303Construction Materials
202 C14 C C-306
Construction Practice
C16S C-304 Construction Practice
203 C14 C C-307
Civil Engineering Drawing - I
C16S C-307Civil Engineering Drawing –I
204 C14 C C-401
Engineering Mathematics - III
C16S C-401Engineering Mathematics - IV
205 C14 C C-402
Theory of Structures
C16S C-402 Theory of Structures
206 C14 C C-403
Quantity Surveying - I
C16S C-403 Quantity Surveying-I
207 C14 C C-404 Surveying – III C16S C-306 Surveying – III
208 C14 C C-405
Transportation Engineering
C16S C-505Transportation Engineering
209 C14 C C-501
Design & Detailing of R.C. Elements
C16S C-501Reinforced Concrete Structures
210 C14 C C-502
Environmental Engineering - I
C16S C-305Environmental Engineering –I
211 C14 C C-503
Quantity Surveying - II
C16S C-503 Quantity Surveying-II
212 C14 C C-504
Irrigation Engineering
C16S C-406 Irrigation Engineering
213 C14 C C-505
Project Management for Construction
C16S C-504Construction Management & Entrepreneurship
214 C14 C C-507
Civil Engineering Drawing - II
C16S C-407Civil Engineering Drawing-II
215 C14 C C-601
Design of Steel Structures
C16S C-502Design of Steel Structures
216 C14 C C-602
Environmental Engineering - II
C16S C-405Environmental Engineering-II
217 C14 C C-603
Construction Technology & Valuation
C16S C-601-AConstruction Technology & Valuation
218 C14 C C-604
Construction Failures, Repairs & Maintenance
C16S C-602-AConstruction Failures & Repairs
219 C14 C C-605
Quality Control & Safety in Construction
C16S C-603-AQuality Control and Safety in Construction
22 C14 C C-607 Structural C16S C-507 Structural Engineering
File No.SBTET-EE-2/DE-2/16/2019-EE-2
0Engineering Drawing
Drawing
221 C09 CH
CH-101
English - I C16 CH-101 ENGLISH
222 C09 CH
CH-102
Engineering Mathematics - I
C16 CH-102ENGINEERING MATHEMATICS - I
223 C09 CH
CH-103
Engineering Physics C16 CH-103ENGINEERING PHYSICS
224 C09 CH
CH-104
Inorganic Chemistry C16 CH-104INORGANIC CHEMISTRY
225 C09 CH
CH-105
General Machanical Engg.
C16 CH-105GENERAL MECHANICAL ENGINEERING
226 C09 CH
CH-106
Materials Technology C16 CH-106MATERIALS TECHNOLOGY
227 C09 CH
CH-107
Engineering Drawing C16 CH-107 ENGG. DRAWING
228 C14 CH
CH-101
ENGLISH C16 CH-101 ENGLISH
229 C14 CH
CH-102
ENGINEERING MATHEMATICS - I
C16 CH-102ENGINEERING MATHEMATICS - I
230 C14 CH
CH-103
ENGINEERING PHYSICS
C16 CH-103ENGINEERING PHYSICS
231 C14 CH
CH-104
INORGANIC CHEMISTRY
C16 CH-104INORGANIC CHEMISTRY
232 C14 CH
CH-105
GENERAL MECHANICAL ENGINEERING
C16 CH-105GENERAL MECHANICAL ENGINEERING
233 C14 CH
CH-106
MATERIAL TECHNOLOGY
C16 CH-106MATERIALS TECHNOLOGY
234 C14 CH
CH-107
ENGINEERING DRAWING
C16 CH-107 ENGG. DRAWING
235 C09 CH
CH-302
Engineering Mathematics - II
C16S CH-301Engineering Mathematics - III
236 C09 CH
CH-303
Basic Electrical Engineering
C16S CH-302 Electrical Technology
237 C09 CH
CH-304
Fluid Mechanics C16S CH-303 Fluid Mechanics
238 C09 CH
CH-305
Organic and Physical Chemistry
C16S CH-304Organic and Physical Chemistry
239 C09 CH
CH-306
Chemical Process Calculations
C16S CH-305Mass and Energy Balance
240 C09 CH
CH-402
Mechanical Unit Operations
C16S CH-402Mechanical Operations
241 C09 CH
CH-403
Inorganic Chemical Technology
C16S CH-403Inorganic Chemical Technology
242 C09 CH
CH-404
Organic Chemical Technology
C16S CH-404Organic Chemical Technology
243 C09 CH
CH-405
Heat Transfer C16S CH-405 Heat Transfer
244 C09 CH
CH-406
Mass Transfer C16S CH-406Mass Transfer Operations
File No.SBTET-EE-2/DE-2/16/2019-EE-2
245 C09 CH
CH-702
Industrial Management and Enterpreneurship
C16S CH-701Industrial Management and Entrepreneurship
246 C09 CH
CH-703
Thermodynamics and Reaction Engg.
C16S CH-702Thermodynamics and Reaction Engineering
247 C09 CH
CH-704
Instrumentation and Process Control
C16S CH-703Instrumentation & Process Control
248 C09 CH
CH-705
Environmental Studies and Pollution Control Engineering
C16S CH-704Environmental studies& Pollution Control Engineering
249 C09 CH
CH-706(A)
Energy Technology C16SCH-
705(A) Energy Technology
250 C09 CH
CH-706(B)
Chemical Plant Operation and Safety
C16SCH-
705(B) Industrial Safety
251 C09 CH
CH-707
Chemical Plant Design Drawing
C16S CH-706Chemical Plant equipment Drawing
252 C14 CH
CH-301
Engineering Mathematics - II
C16S CH-301Engineering Mathematics - III
253 C14 CH
CH-302
Electrical Technology C16S CH-302 Electrical Technology
254 C14 CH
CH-303
Fluid Mechanics C16S CH-303 Fluid Mechanics
255 C14 CH
CH-304
Organic and Physical Chemistry
C16S CH-304Organic and Physical Chemistry
256 C14 CH
CH-305
Mass and Energy Balance
C16S CH-305Mass and Energy Balance
257 C14 CH
CH-306
Energy Technology C16S CH-705(A) Energy Technology
258 C14 CH
CH-401
Engineering Mathematics - III
C16S CH-401Engineering Mathematics - IV
259 C14 CH
CH-402
Mechanical Unit Operations
C16S CH-402Mechanical Operations
260 C14 CH
CH-403
Inorganic Chemical Technology
C16S CH-403Inorganic Chemical Technology
261 C14 CH
CH-404
Organic Chemical Technology
C16S CH-404Organic Chemical Technology
262 C14 CH
CH-405
Heat Transfer C16S CH-405 Heat Transfer
263 C14 CH
CH-406
Mass Transfer Operations -1
C16S CH-406Mass Transfer Operations
264 C14 CH
CH-701
Industrial Management and Entrepreneurship
C16S CH-701Industrial Management and Entrepreneurship
265 C14 CH
CH-702
Thermodynamics and Reaction Engineering
C16S CH-702Thermodynamics and Reaction Engineering
266 C14 CH
CH-703
Instrumentation & Process Control
C16S CH-703Instrumentation & Process Control
267 C14 CH
CH-704
Environmental studies & Pollution Control Engineering
C16S CH-704Environmental studies& Pollution Control Engineering
268 C14 CH
CH-705
Mass Transfer Operations - II
C16S CH-406Mass Transfer Operations
269
C14 CH CH- Industrial Safety C16S CH-705(B) Industrial Safety
File No.SBTET-EE-2/DE-2/16/2019-EE-2
706270 C14 CH
CH-707
Chemical Plant Equipment Drawing
C16S CH-706Chemical Plant equipment Drawing
271 C09 CM
CM-101
English - I C16 CM-101 English-I
272 C09 CM
CM-102
Engineering Mathematics - I
C16 CM-102Engineering Mathematics - I
273 C09 CM
CM-103
Engineering Physics C16 CM-103 Engineering Physics
274 C09 CM
CM-104
Engineering Chemistry and Environmental Studies
C16 CM-104Engineering Chemistry & Environmental studies
275 C09 CM
CM-106
Engineering Drawing
C16 CM-107 Engineering Drawing
276 C14 CM
CM-101
ENGLISH-I C16 CM-101 English-I
277 C14 CM
CM-102
ENGINEERING MATHEMATICS - I
C16 CM-102Engineering Mathematics - I
278 C14 CM
CM-103
ENGINEERING PHYSICS
C16 CM-103 Engineering Physics
279 C14 CM
CM-104
ENGINEERING CHEMISTRY ANDENVIRONMENTAL STUDIES
C16 CM-104Engineering Chemistry & Environmental studies
280 C14 CM
CM-105
BASIC OF COMPUTER ENGINEERING
C16 CM-105Computer Fundamentals & Office Automation
281 C14 CM
CM-106
PROGRAMMING IN C
C16 CM-106 Programming in C
282 C14 CM
CM-107
Engineering Drawing
C16 CM-107 Engineering Drawing
283 C09 CM
CM-302
Engineering Mathematics - II
C16S CM-301Engineering Mathematics–III
284 C09 CM
CM-303
Basic Electrical & Electronics Engg
C16S CM-302Basic Electrical & Electronics Engineering
285 C09 CM
CM-305
Data Structures Through C
C16S CM-403Data structures using C++
286 C09 CM
CM-306
RDBMS C16S CM-305 RDBMS
287 C09 CM
CM-402
Operating Systems C16S CM-402 Operating systems
288 C09 CM
CM-403
Computer Hardware& Networking
C16S CM–503Computer Hardware & Networking
289 C09 CM
CM-404
OOP Through C++ C16S CM-306 OOP through C++
290 C09 CM
CM-405
Microprocessors C16S CM-404 Microprocessors
291 C09 CM
CM-406
Web Designing C16S CM-406 Web designing
292 C09 CM
CM-602
Industrial Management and
C16S CM–501Industrial Management &
File No.SBTET-EE-2/DE-2/16/2019-EE-2
Enterpreneurship Entrepreneurship293 C09 CM
CM-603
System Administration
C16S CM–504System Administration
294 C09 CM
CM-604
Java Programming C16S CM–502 Java Programming
295 C09 CM
CM-605
.Net Programming C16S CM-405.Net Programming with C#
296 C09 CM
CM-606(A
)
Software Engineering
C16SCM–
506(A)Software Engineering
297 C09 CM
CM-606(B
)Mobile computing C16S
CM-601-B
Mobile Communication
298 C09 CM
CM-606(C
)
Advanced Database Systems
C16SCM-602-
AAdvanced Database Systems
299 C14 CM
CM-301
Engineering Mathematics –II
C16S CM-301Engineering Mathematics–III
300 C14 CM
CM-302
Basic Electrical & Electronics Engg.
C16S CM-302Basic Electrical & Electronics Engineering
301 C14 CM
CM-303
Digital Electronics C16S CM-303 Digital Electronics
302 C14 CM
CM-304
Computer Organization
C16S CM-304Computer Organization
303 C14 CM
CM-305
Data Structures through C
C16S CM-403Data structures using C++
304 C14 CM
CM-306
RDBMS C16S CM-305 RDBMS
305 C14 CM
CM-401
Engineering Mathematics III
C16S CM-401Engineering Mathematics- IV
306 C14 CM
CM-402
Operating Systems C16S CM-402 Operating systems
307 C14 CM
CM-403
Computer Hardware& Maintenance
C16S CM–503Computer Hardware & Networking
308 C14 CM
CM-404
Microprocessors C16S CM-404 Microprocessors
309 C14 CM
CM-405
OOP through C++ C16S CM-306 OOP through C++
310 C14 CM
CM-501
Java Programming C16S CM–502 Java Programming
311 C14 CM
CM-502
Software Engineering
C16SCM–
506(A)Software Engineering
312 C14 CM
CM-503
Advanced Database Systems
C16SCM-602-
AAdvanced Database Systems
313 C14 CM
CM-504
Web Designing C16S CM-406 Web designing
314 C14 CM
CM-505
Mobile Communication
C16SCM-601-
BMobile Communication
315 C14 CM
CM-506
Cloud Computing C16SCM-
506(C)Cloud Computing
316 C14 CM
CM-601
Industrial Management & Entrepreneurship
C16S CM–501Industrial Management & Entrepreneurship
File No.SBTET-EE-2/DE-2/16/2019-EE-2
317 C14 CM
CM-602
Advanced Java Programming
C16SCM-
601(A)Advance Java Programming
318 C14 CM
CM-603
System Administration
C16S CM–504System Administration
319 C14 CM
CM-605
.Net Programming C16S CM-405.Net Programming with C#
320 C14 CM
CM-606
Cryptography and Network Security
C16SCM-
506(B)Cryptography and Network Security
321 C09 ECE EC-101 English - I C16 EC-101 English - I
322 C09 ECE EC-102
Engineering Mathematcs - I
C16 EC-102Engineering Mathematcs - I
323 C09 ECE EC-103 Engineering Physics C16 EC-103 Engineering Physics
324 C09 ECE EC-104
Engineering Chemistry and Environmental Studies
C16 EC-104Engineering Chemistry and Environmental Studies
325 C09 ECE EC-105 Basic Electronics C16 EC-105
BASIC ELECTRONIC COMPONENTS & MATERIALS
326 C09 ECE EC-107 Engineering Drawing C16 EC-107 Engineering Drawing
327 C14 ECE EC-101 ENGLISH C16 EC-101 ENGLISH
328 C14 ECE EC-102
ENGINEERING MATHEMATICS - I
C16 EC-102ENGINEERING MATHEMATICS - I
329 C14 ECE EC-103
ENGINEERING PHYSICS
C16 EC-103 ENGINEERING PHYSICS
330 C14 ECE EC-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
C16 EC-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
331 C14 ECE EC-105
BASIC ELECTRICAL & ELECTRONICS ENGINEERING
C16 EC-105BASIC ELECTRONIC COMPONENTS & MATRIALS
332 C14 ECE EC-107 Engineering Drawing C16 EC-107 Engineering Drawing
333 C09 ECE EC-302
Engineering Mathematcs - II
C16S EC-301Engineering Mathematcs - III
334 C09 ECE EC-304
Communicaton Engineering
C16S EC-304Analog Communicaton
335 C09 ECE EC-305 Digital Electronics C16S EC-305 Digital Electronics
336 C09 ECE EC-306 Circuit Theory C16S EC-303 Network Analysis
337 C09 ECE EC-402 Electronic Circuits - II C16S EI-402 Electronic Circuits
338 C09 ECE EC-404 Microprocessors C16S CME-404 Microprocessors
339 C09 ECE EC-405
Electronic Measuring Instruments
C16S EC-306Electronic Measuring Instruments
340 C09 ECE EC-406
Audio & Video Systems
C16S EC-503 Consumer Electronics
341 C09 ECE EC-602
Industrial Management and
C16S M-501Industrial Management &
File No.SBTET-EE-2/DE-2/16/2019-EE-2
Enterpreneurship Entrepreneurship
342 C09 ECE EC-603 Micro Controllers C16S EC-405
Microcontroller Programming
343 C09 ECE EC-604
Advanced Communicaton Systems
C16S EC-403Advanced Communicaton Systems
344 C09 ECE EC-605 Industrial Electronics C16S EC-502 Industrial Electronics
345 C09 ECE
EC-606(A)
Data Communicaton and Computer Network
C16S EC-504Data Communicaton & Computer Networking
346 C14 ECE
EC-301
Engineering Mathematics - II C16S EC-301
Engineering Mathematics – III
347 C14 ECE
EC-302
Electronic Devices& Circuits C16S EC-302
Electronic Devices & Circuits
348 C14 ECE
EC-303
Electronic Measuring Instruments
C16S EC-306Electronic Measuring Instruments
349 C14 ECE
EC-304
Analogue Communication C16S EC-304
Analog Communicaton
350 C14 ECE
EC-305 Digital Electronics C16S EC-305 Digital Electronics
351 C14 ECE
EC-306
Electrical Technology C16S EC-206 Electrical Technology
352 C14 ECE
EC-401
Engineering Mathematics - III
C16S EC-401Engineering Mathematics-IV
353 C14 ECE
EC-402
Linear Integrated Circuits
C16S EC-402Linear Integrated Circuits
354 C14 ECE
EC-403
Network Analysis C16S EC-303 Network Analysis
355 C14 ECE
EC-404
Digital Communications
C16S EC-404Digital Communicaton
356 C14 ECE
EC-405
Microprocessor & Microcontroller Programming
C16S EC-405Microcontroller Programming
357 C14 ECE
EC-406
Programming in C C16S EC-406 Programming in C
358 C14 ECE
EC-501
Industrial Management C16S EC-501
Industrial Management & Entrepreneurship
359 C14 ECE
EC-502
Consumer Electronics C16S EC-503 Consumer Electronics
360 C14 ECE
EC-503
Industrial Electronics C16S EC-502 Industrial Electronics
361 C14 ECE
EC-504
Microcontroller Applications C16S EC-505
Microcontroller Interfacing & Applicatons
362 C14 ECE
EC-505
Electronic ProductDesign & QualityAssurance
C16S EC-602AElectronic Product Design
363 C14 ECE
EC-506
Mobile Communications C16S EC-506A
Mobile and Optcal iber communicaton
364 C14 ECE
EC-601
ADVANCED COMMUNICATION C16S EC-403
Advanced Communicaton
File No.SBTET-EE-2/DE-2/16/2019-EE-2
SYSTEMS Systems
365 C14 ECE
EC-602
Data Communicaton & Computer Networking
C16S EC-504Data Communicaton & Computer Networking
366 C14 ECE
EC-603
OPTICAL FIBER COMMUNICATION. C16S EC-506A
Mobile and Optcal iber communicaton
367 C14 ECE
EC-605
Advanced Microcontrollers & DSP
C16S EC-602BAdvanced Microcontrollers & DSP
368 C14 ECE
EC-606
Digital Circuit Design through Verilog HDL
C16S EC-603BDigital Circuit Design through Verilog HDL
369 C09 EE EE-101 English -I C16 EE-101 English - I
370 C09 EE EE-102
Engineering Mathematics - I
C16 EE-102Engineering Mathematcs - I
371 C09 EE EE-103 Engineering Physics C16 EE-103 Engineering Physics
372 C09 EE EE-104
Engineering Chemistry and Environmental Studies
C16 EE-104Engineering Chemistry and Environmental Studies
373 C09 EE EE-107 Engineering Drawing C16 EE-107
ENGINEERING DRAWING
374 C14 EE EE-101 ENGLISH C16 EE-101 ENGLISH
375 C14 EE EE-102
ENGINEERING MATHEMATICS - I
C16 EE-102ENGINEERING MATHEMATICS - I
376 C14 EE EE-103
ENGINEERING PHYSICS
C16 EE-103ENGINEERING PHYSICS
377 C14 EE EE-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
C16 EE-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
378 C14 EE 105
ELECTRICAL ENGINEERING MATERIALS
C16 EE-105ELECTRICAL ENGINEERING MATERIALS
379 C14 EE 106
BASIC ELECTRICAL ENGINEERING
C16 EE-106BASIC ELECTRICAL ENGINEERING
380 C14 EE 107
ENGINEERING DRAWING
C16 EE-107ENGINEERING DRAWING
381 C09 EE EE-302
Engineering Mathematics - II C16S EE-301
Engineering Mathematcs - III
382 C09 EE EE-303 Electrical Circuits C16S EE-302 Electric circuits
383 C09 EE EE-304
DC Machines & Batteries C16S EE-304 DC Machines
384 C09 EE EE-305
Electrical & Electronic Measuring Instruments
C16S EE-305 Electrical & Electronic Measuring Instruments
385 C09 EE EE-306 Electronics Engg C16S EE-306
Electronics Engineering
38 C09 EE EE-402 AC Machines - I C16S EE-402 A.C. Machines - I
File No.SBTET-EE-2/DE-2/16/2019-EE-2
6387 C09 EE EE-403 Power Systems - I C16S EE-303
Power systems-I (Generation)
388 C09 EE EE-404
Electrical Installation and Estimation C16S EE-404
Electrical Installation and Estimation
389 C09 EE EE-405
Digital Electronics and Micro controllers C16S EE-405
Digital Electronics and Microcontrollers
390 C09 EE EE-406
General Machanical Engg. C16S EE-406
General Mechanical Engineering
391 C09 EE EE-408
Electrical EngineeringDrawing C16S EE-407
Electrical EngineeringDrawing
392 C09 EE EE-602
Industrial Management and Enterpreneurship
C16S M-501Industrial Management & Entrepreneurship
393 C09 EE EE-603 AC Machines - II C16S EE-502 A.C. Machines - II
394 C09 EE EE-604 Power Electronics C16S EE-504 Power Electronics
395 C09 EE
EE-605(A)
Electrical Utilisationand Automation
C16S EE-506AElectrical Utilization Automation
396 C09 EE
EE-605(B)
Electrical Traction & PLC C16S EE-505
Electrical drives and Traction
397 C09 EE
EE-605('C)
Electric Traction and Renewable Energy Sourses
C16S EE-601ARenewable Energy Sources
398 C09 EE EE-606 Power Systems - II C16S EE-403
Power Systems – II (T&D)
399 C14 EE EE-301
Engineering Mathematics - II C16S EE-301
Engineering Mathematics - III
400 C14 EE EE-302 DC Machines C16S EE-304 DC Machines
401 C14 EE EE-303 Electric Circuits C16S EE-302 Electric circuits
402 C14 EE EE-304
Electrical & Electronic Measuring Instruments
C16S EE-305 Electrical & Electronic Measuring Instruments
403 C14 EE EE-305 Electronics-I C16S EE-306
Electronics Engineering
404 C14 EE EE-306
General Mechanical Engineering C16S EE-406
General Mechanical Engineering
405 C14 EE
EE-401
Engineering Mathematics - III
C16S EE-401Engineering Mathematics-IV
406 C14 EE
EE-402
A.C. Machines - I C16S EE-402 A.C. Machines - I
407 C14 EE
EE-403
Power Systems – I (Generation)
C16S EE-303Power systems-I (Generation)
408 C14 EE
EE-404
Electrical Installation and Estimation
C16S EE-404Electrical Installation and Estimation
409 C14 EE
EE-406
Programming in C C16S EC-406 Programming in C
410 C14 EE
EE-407
Electrical Engineering Drawing
C16S EE-407Electrical EngineeringDrawing
File No.SBTET-EE-2/DE-2/16/2019-EE-2
411 C14 EE EE-501 Electrical Utilization C16S EE-506(B)
Electrical utilization and Maintenance
412 C14 EE EE-502 A.C.Machines - II C16S EE-502 A.C. Machines - II
413 C14 EE EE-503
Power Systems – II (T&D) C16S EE-403
Power Systems – II (T&D)
414 C14 EE EE-504 Industrial Drives C16S EE-505
Electrical drives and Traction
415 C14 EE EE-505 Digital Electronics C16S EC-305 Digital Electronics
416 C14 EE EE-506
Maintenance of Electrical Systems C16S EE-506B
Electrical utilization and Maintenance
417 C14 EE
EE-601
Industrial Management
C16S EC-501Industrial Management & Entrepreneurship
418 C14 EE
EE-602
Electric Traction C16S EE-505Electrical drives and Traction
419 C14 EE
EE-603
Power Systems – III(Switch Gear and Protection)
C16S EE-503Power Systems – III (Switch Gear and Protection)
420 C14 EE
EE-604
Power Electronics C16S EE-504 Power Electronics
421 C14 EE
EE-605
Micro Controllers and Applications
C16S EE-405Digital Electronics and Microcontrollers
422 C14 EE
EE-606
Industrial Automation
C16S EE-506AElectrical utilization Automation
423 C09 AEI
AEI-101
English - I C16 EI-101 English - I
424 C09 AEI
AEI-102
Engineering Mathematics - I
C16 EI-102Engineering Mathematics - I
425 C09 AEI
AEI-103 Engineering Physics C16 EI-103 Engineering Physics
426 C09 AEI
AEI-104
Engineering Chemistry & Environmental Studies
C16 EI-104
Engineering Chemistry & Environmental Studies
427 C09 AEI
AEI-105
Electronic components & Devices
C16 EI-105Electronics Components and Materials
428 C09 AEI
AEI-107
Engineering Drawing C16 EI-107 Engineering Drawing
429 C14 AEI
AEI-101
English C16 EI-101 English
430 C14 AEI
AEI-102
Engineering Mathematics - I
C16 EI-102Engineering Mathematics - I
431 C14 AEI
AEI-103 Engineering Physics C16 EI-103 Engineering Physics
432 C14 AEI
AEI-104
Engineering Chemistry & Environmental Studies
C16 EI-104
Engineering Chemistry & Environmental Studies
433 C14 AEI
AEI-105
ELECTRONICS COMPONENTS AND MATERIALS
C16 EI-105Electronics Components and Materials
43 C14 AEI AEI- Basic Electrical C16 EI-106 Basic Electrical
File No.SBTET-EE-2/DE-2/16/2019-EE-2
4 106 Engineering Engineering
435 C14 AEI
AEI-107
ENGINEERING DRAWING
C16 EI-107 Engineering Drawing
436 C09 AEI
AEI-302
Engineering Mathematics - II
C16S EI-301Engineering Mathematics - III
437 C09 AEI
AEI-303
Electronic circuits C16S EI-402 Electronic Circuits
438 C09 AEI
AEI-304
Basic Electrical Engineering
C16S EI-306EI-306 Electrical Technology
439 C09 AEI
AEI-305
Digital Electronics C16S EI-305EI-305 Digital Electronics
440 C09 AEI
AEI-306
Process Instrumentation
C16S EI-303EI -303 Process Instrumentation
441 C09 AEI
AEI-402
Electronic Measuring Instruments
C16S EI-304Electronic Measuring Instruments
442 C09 AEI
AEI-403
Microcontrollers and Its Applications
C16S EI-406Micro Controllers & Applications
443 C09 AEI
AEI-404
Industrial Electronics and & Control Engineering
C16S EI-404Industrial Electronics and control Systems
444 C09 AEI
AEI-405
Analytical Instrumentation
C16S EI-504Analytical Instrumentation
445 C09 AEI
AEI-406
Process Control C16S EI-405 Process Control.
446 C09 AEI
AEI-602
Industrial Management and Enterpreneurship
C16S EI-501Industrial Management and Entrepreneurship
447 C09 AEI
AEI-603
Bio Medical Instrumentation
C16S EI-506ABio Medical Instrumentation
448 C09 AEI
AEI-604
Industrial Automation C16S EI-505 Industrial Automation
449 C09 AEI
AEI-605
Principles of Communications & Linear IC applications
C16S EI-502
Principles of Communication & Linear IC Applications
450 C09 AEI
AEI-606(A)
Power Electronics C16S EI-603B Power Electronics
451 C09 AEI
AEI-606(B)
Power plant Instrumentation
C16S EI-503Instrumentation in Process Industries
452 C14 AEI
AEI-301
Engineering Mathematics - II
C16S EI-301Engineering Mathematics - III
453 C14 AEI
AEI-302
Electrical Machines C16S EI-306 Electrical Technology
454 C14 AEI
AEI-303
Electronic Devices and Applications
C16S EI-302Electronic Devices and Applications
455 C14 AEI
AEI-304
Digital Electronics C16S EI-305 Digital Electronics
456 C14 AEI
AEI-305
Electronic Measuring Instruments
C16S EI-304Electronic Measuring Instruments
457 C14 AEI
AEI-306
Process Instrumentation
C16S EI-303 Process Instrumentation
458 C14 AEI
AEI-401
Engineering Mathematics - III
C16S EI-401Engineering Mathematics - IV
459 C14 AEI
AEI-402
Network Theory C16S EI-306 Electrical Technology
File No.SBTET-EE-2/DE-2/16/2019-EE-2
460 C14 AEI
AEI-403
Electronic Circuits C16S EI-402 Electronic Circuits
461 C14 AEI
AEI-404
Programming in 'C' C16S EC-404 Programming in 'C'
462 C14 AEI
AEI-405
Industrial Instrumentation
C16S EI-403 Industrial Instrumentation
463 C14 AEI
AEI-406
Industrial Electronics & Control Systems
C16S EI-404 Industrial Electronics and control Systems
464 C14 AEI
AEI-501
Industrial Safety & Quality Control
C16S EI-506B Industrial Safety & Quality Control
465 C14 AEI
AEI-502
Process Control C16S EI-405Process Control.
466 C14 AEI
AEI-503
Linear Integrated Circuits & Applications
C16S EI-502Principles of Communication & Linear IC Applications
467 C14 AEI
AEI-504
Micro Controllers & Applications
C16S EI-406 Micro Controllers & Applications
468 C14 AEI
AEI-505
Analytical Instrumentation
C16S EI-504 Analytical Instrumentation
469 C14 AEI
AEI-601
Industrial Management and Enterpreneurship
C16S EI-501Industrial Management and Enterpreneurship
470 C14 AEI
AEI-602
Industrial Automation C16S EI-505 Industrial Automation
471 C14 AEI
AEI-603
Communication Engineering
C16S EI-502Principles of Communication & Linear IC Applications
472 C14 AEI
AEI-604
Instrumentation in Process Industries
C16S EI-503 Instrumentation in Process Industries
473 C14 AEI
AEI-605
Bio-medical Instrumentation
C16S EI-506(A) Bio Medical Instrumentation
474 C09 FWT
FW-101
English -I C16 FW-101 English -I
475 C09 FWT
FW-102
Engineering Mathematcs-I
C16 FW-102Engineering Mathematcs-I
476 C09 FWT
FW-103
Engineering Physics C16 FW-103 Engineering Physics
477 C09 FWT
FW-104
Engineering Chemistry and Environmental Studies
C16 FW-104Engineering Chemistry and Environmental Studies
478 C09 FWT
FW-105
Introductory Leather Products Technology
C16 FW-105INTRODUCTORY LEATHER PRODUCTS
File No.SBTET-EE-2/DE-2/16/2019-EE-2
TECHNOLOGY479 C09 FWT
FW-106
Basic Engineering C16 FW-106 BASIC ENGINEERING
480 C09 FWT
FW-107
Engineering Drawing C16 FW-107 Engineering Drawing
481 C14 FWT
FW-101
ENGLISH C16 FW-101 ENGLISH
482 C14 FWT
FW-102
ENGINEERING MATHEMATICS - I
C16 FW-102ENGINEERING MATHEMATICS - I
483 C14 FWT
FW-103
ENGINEERING PHYSICS
C16 FW-103 ENGINEERING PHYSICS
484 C14 FWT
FW-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
C16 FW-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
485 C14 FWT
FW-105
INTRODUCTORY LEATHER PRODUCTS TECHNOLOGY
C16 FW-105INTRODUCTORY LEATHER PRODUCTSTECHNOLOGY
486 C14 FWT
FW-106
BASIC ENGINEERING C16 FW-106 BASIC ENGINEERING
487 C14 FWT
FW-107
ENGINEERING DRAWING
C16 FW-107ENGINEERING DRAWING
488 C09 FWT
FW-402
Engineering Mathematcs-II
C16S FW-402Engineering Mathematcs-II
489 C09 FWT
FW-403
Leather Products Fabricaton Technology-I
C16S FW-403Leather Products Fabricaton Technology-I
490 C09 FWT
FW-404
Footwear Materials C16S FW-404 Footwear Materials
491 C09 FWT
FW-405
Elementary Leather Technology
C16S FW-405Elementary Leather Technology
492 C09 FWT
FW-406
Footwear Fabricaton Technology-I
C16S FW-406Footwear Fabricaton Technology-I
493 C09 FWT
FW-502
Leather Products Fabricaton Technology –II
C16S FW-502
Leather Products Fabricaton Technology-II
494 C09 FWT
FW-503
Testng and Quality Control
C16S FW-503Testng and Quality Control
495 C09 FWT
FW-504
Computer Applicatonin Leather products
C16S FW-504Computer Applicatonin Leather Products
496 C09 FWT
FW-505
Sports & Specialty Footwear
C16S FW-505Sports & Specialty Footwear
497 C09 FWT
FW-506
Footwear Fabricaton Technology-II
C16S FW-506Footwear Fabricaton Technology-II
498 C09 FWT
FW-702
IndustrialManagement andEntrepreneurship
C16S FW-701Industrial Management & Entrepreneurship
499 C09 FWT
FW-703
Estimating, Costing,Industrial Promotion andMarketing.
C16S FW-705AEstimating, Costing, Industrial promotionand Marketing.
File No.SBTET-EE-2/DE-2/16/2019-EE-2
500 C09 FWT
FW-704
Machinery Maintenance Engineering
C16S FW-703Footwear Machinery MaintenanceEngineering
501 C09 FWT
FW-705
Footwear Fabrication Technology-III
C16S FW-704Footwear Fabrication Technology-III
502 C09 FWT
FW-706A
Modern Footwear Designing
C16S FW-702Advanced Footwear Designing
503 C14 FWT
FW-401
Engineering Mathematics-II
C16S FW-401Engineering Mathematics-III
504 C14 FWT
FW-402
Elementary Footwear Designing
C16S FW-402Elementary Footwear Designing
505 C14 FWT
FW-403
Leather Products Fabrication Technology-I
C16S FW-403Leather Products Fabricaton Technology-I
506 C14 FWT
FW-404
Footwear Materials C16S FW-404 Footwear Materials
507 C14 FWT
FW-405
Elementary Leather Technology
C16S FW-405Elementary Leather Technology
508 C14 FWT
FW-406
Footwear Fabrication Technology-I
C16S FW-406Footwear Fabricaton Technology-I
509 C14 FWT
FW-501
Engineering Mathematics-III C16S FW-501
Engineering Mathematics-IV
510 C14 FWT
FW-502
Leather Products Fabrication Technology-II
C16S FW-502
Leather Products Fabricaton Technology-II
511 C14 FWT
FW-503
Testing and Quality Control C16S FW-503
Testng and Quality Control
512 C14 FWT
FW-504
Computer Applicationin leather products C16S FW-504
Computer Applicatonin Leather Products
513 C14 FWT
FW-505
Sports &SpecialtyyFootwearr C16S FW-505
Sports & Specialty Footwear
514 C14 FWT
FW-506
FootwearFabrication Technology-II C16S FW-506
Footwear Fabricaton Technology-II
515 C14 FWT
FW-601
Industrial Management & Entrepreneurship
C16S FW-701Industrial Management & Entrepreneurship
516 C14 FWT
FW-602
Estimating, Costing, Industrial promotion and Marketing.
C16S FW-705AEstimating, Costing, Industrial promotionand Marketing.
517 C14 FWT
FW-603
Footwear Machinery Maintenance Engineering
C16S FW-703Footwear Machinery MaintenanceEngineering
518 C14 FWT
FW-604
Footwear FabricationTechnology-III C16S FW-704
Footwear Fabrication Technology-III
519 C14 FWT
FW-605A
Advanced FootwearDesigning
C16S FW-702FW-702-Advanced Footwear Designing
520 C09
HMCT
HMCT-101
Food Production – I C16 HMCT-101FOOD PRODUCTION -I
52 C09 HMC HMC Food & Beverage C16 HMCT-102 FOOD &
File No.SBTET-EE-2/DE-2/16/2019-EE-2
1 T T-102 Service – IBEVERAGE SERVICE -I
522 C09
HMCT
HMCT-103
Front Office Operations
C16 HMCT-103FRONT OFFICE OPERATIONS
523 C09
HMCT
HMCT-104
Accommodation Operations
C16 HMCT-104ACCOMMODATIONOPERATIONS
524 C09
HMCT
HMCT-105
Nutrition , Hygiene & Sanitation
C16 HMCT-105NUTRITION AND HYGIENE
525 C14
HMCT
HMCT-101
FOOD PRODUCTION
C16 HMCT-101FOOD PRODUCTION -I
526 C14
HMCT
HMCT-102
FOOD & BEVERAGE SERVICE
C16 HMCT-102FOOD & BEVERAGE SERVICE -I
527 C14
HMCT
HMCT-103
FRONT OFFICE OPERATIONS
C16 HMCT-103FRONT OFFICE OPERATIONS
528 C14
HMCT
HMCT-104
ACCOMMODATION OPERATIONS
C16 HMCT-104ACCOMMODATIONOPERATIONS
529 C14
HMCT
HMCT-105
NUTRITION AND HYGIENE
C16 HMCT-105NUTRITION AND HYGIENE
530 C09
HMCT
HMCT-301
Food Production – II (Bakery & Confectionary)
C16SHMCT-
501Bakery & Confectonery
531 C09
HMCT
HMCT-302
Food & Beverage Management
C16SHMCT-
502Food & Beverage Management
532 C09
HMCT
HMCT-303
Front Office Management
C16SHMCT-
303Front Ofce Management
533 C09
HMCT
HMCT-304
Hotel Engineering C16SHMCT-
404Hotel Engineering
534 C09
HMCT
HMCT-305
Hotel Accounts C16SHMCT-
305Hotel Accounts
535 C09
HMCT
HMCT-401
Food Production – III (COOKERY)
C16SHMCT-
301Regional Cookery
536 C09
HMCT
HMCT-402
Food & Beverage Service – II
C16SHMCT-
402Wines & Spirits
537 C09
HMCT
HMCT-403
Human Resource Management
C16SHMCT-
403Human Resource Management
538 C09
HMCT
HMCT-404
Financial Management
C16SHMCT-
405Financial Management
539 C09
HMCT
HMCT-601
Food Production – IV
C16SHMCT-
401Advance Cookery
540 C09
HMCT
HMCT-602
Food & Beverage Service – III
C16SHMCT-
302 M.I.C.E
541 C09
HMCT
HMCT-603
Tourism & Travel Management
C16SHMCT-
503Tourism & Travel Management
542 C09
HMCT
HMCT-604
Sales & Marketing C16SHMCT-
504Sales & Marketng
543 C09
HMCT
HMCT-605
Hotel Law C16SHMCT-
505Hotel Law
544 C14
HMCT
HMCT-301
Regional Cookery C16SHMCT-
501Bakery & Confectonery
File No.SBTET-EE-2/DE-2/16/2019-EE-2
545 C14
HMCT
HMCT-302
Food & Beverage Service – Wines & Spirits
C16SHMCT-
502Food & Beverage Management
546 C14
HMCT
HMCT-303
Front Office Management
C16SHMCT-
303Front Ofce Management
547 C14
HMCT
HMCT-304
House- keeping Operations
C16SHMCT-
304House- keeping Operatons
548 C14
HMCT
HMCT-305
Hotel Accounts C16SHMCT-
305Hotel Accounts
549 C14
HMCT
HMCT-401
Advanced Cookery C16SHMCT-
401Advance Cookery
550 C14
HMCT
HMCT-402
Food & Beverage Service – M.I.C.E
C16SHMCT-
302 M.I.C.E
551 C14
HMCT
HMCT-403
Human Resource Management
C16SHMCT-
403Human Resource Management
552 C14
HMCT
HMCT-404
Hotel Engineering C16SHMCT-
404Hotel Engineering
553 C14
HMCT
HMCT-405
Financial Management
C16SHMCT-
405Financial Management
554 C14
HMCT
HMCT-601
Bakery & Confectionary
C16SHMCT-
501Bakery & Confectonery
555 C14
HMCT
HMCT-602
Food & Beverage Management
C16SHMCT-
502Food & Beverage Management
556 C14
HMCT
HMCT-603
Tourism & Travel Management
C16SHMCT-
503Tourism & Travel Management
557 C14
HMCT
HMCT-604
Sales & Marketing C16SHMCT-
504Sales & Marketng
558 C14
HMCT
HMCT-605
Hotel Law C16SHMCT-
505Hotel Law
559 C09 M M-101 English -I C16 M-101 English
560 C09 M M-102
Engineering Mathematics - I
C16 M-102Engineering Mathematics - I
561 C09 M M-103 Engineering Physics C16 M-103 Engineering Physics
562 C09 M M-104
Engineering Chemistry and Environmental Studies
C16 M-104
Engineering Chemistry &Environmental Studies
563 C09 M M-105
Workshop Technology
C16 M-106Workshop Technology
564 C09 M M-107
Engineering Drawing
C16 M-107 Engineering Drawing
565 C14 M M-101 English C16 M-101 English
566 C14 M M-102
Engineering Mathematics - I
C16 M-102Engineering Mathematics - I
567 C14 M M-103 Engineering Physics C16 M-103 Engineering Physics
568 C14 M M-104
Engineering Chemistry And Environmental Studies
C16 M-104
Engineering Chemistry &Environmental Studies
File No.SBTET-EE-2/DE-2/16/2019-EE-2
569 C14 M M-106
Workshop Technology
C16 M-106Workshop Technology
570 C14 M M-107
Engineering Drawing
C16 M-107 Engineering Drawing
571 C09 M M-302
Engineering Mathenatics - II
C16S M-301Engineering Mathematics - III
572 C09 M M-304
Electrical Engg & Basic Electronics
C16S M-402Basic Electrical& Electronics Engineering
573 C09 M M-305
Thermal Engineering - I
C16S M-303Basic Thermodynamics
574 C09 M M-306
Manufacturing Technology - I
C16S M-305Manufacturing Technology -I
575 C09 M M-307 Machine Drawing C16S M-306 Machine Drawing
576 C09 M M-402
Manufacturing Technology - II
C16S M-405Manufacturing Technology - II
577 C09 M M-403 Strength of Materials C16S M-302 Strength of Materials
578 C09 M M-404 Engineering Materials C16S M-304 Engineering Materials
579 C09 M M-405
Thermal Engineering - II
C16S M-403Heat Power Engineering
580 C09 M M-406
Hydraulics & Fluid Power systems
C16S M-503Hydraulic and Pneumatic Systems
581 C09 M M-407 Production Drawing C16S M-406 Production Drawing
582 C09 M M-602
Industrial Management and Enterpreneurship
C16S M-501Industrial Management & Entrepreneurship
583 C09 M M-603
Industrial Engineering& Estimating and Costing
C16S M-502Industrial Engineering& Estimating & Costing
584 C09 M M-604 CAD/CAM C16S M-505 CAD/CAM
585 C09 M M-605
Design of Machine elements
C16SM-404M-504
Design of Machine Elements - I & Designof Machine Elements -II
586 C09 M
M-606(A)
Refrigeration & Air Conditioning
C16S M-506A Refrigeration & Air Conditioning
587 C09 M
M-606(B)
Automobile Engineering
C16S M-506BAutomobile Engineering
588 C09 M
M-606('C)
Energy sources & Power plant Engineering
C16S M-506CEnergy Sources & Power Plant Engineering
589 C14 M M-301
Engineering Mathematics - II
C16S M-301Engineering Mathematics - III
590 C14 M M-302 Materials Science C16S M-304 Engineering Materials
591 C14 M M-303
Basic Electrical& Electronics Engineering
C16S M-402Basic Electrical& Electronics Engineering
592 C14 M M-304
Basic Thermodynamics
C16S M-303Basic Thermodynamics
File No.SBTET-EE-2/DE-2/16/2019-EE-2
593 C14 M M-305 Strength of Materials C16S M-302 Strength of Materials
594 C14 M M-306
Manufacturing Technology-I
C16S M-305Manufacturing Technology -I
595 C14 M M-307
Machine Drawing Practice
C16S M-306 Machine Drawing
596 C14 M M-401
Engineering Mathematics - III
C16S M-401Engineering Mathematics - IV
597 C14 M M-402
Design of Machine Elements-I
C16S M-404Design of Machine Elements - I
598 C14 M M-403
Industrial Engineering
C16S M-502Industrial Engineering& Estimating & Costing
599 C14 M M-404
Heat Power Engineering-I
C16S M-403Heat Power Engineering
600 C14 M M-405
Fluid Mechanics & Hydraulic Machinery
C16S M-503Hydraulic and Pneumatic Systems
601 C14 M M-406
Manufacturing Technology -II
C16S M-405Manufacturing Technology - II
602 C14 M M-407
Production DrawingPractice
C16S M-406 Production Drawing
603 C14 M M-501
Industrial Management
C16S M-501Industrial Management & Entrepreneurship
604 C14 M M-502
Design of Machine Elements -II
C16S M-504 Design of Machine Elements -II
605 C14 M M-503 Estimating & Costing C16S M-502
Industrial Engineering& Estimating & Costing
606 C14 M M-504
Heat Power Engineering-II
C16S M-403 Heat Power Engineering
607 C14 M M-505
Fluid Power Control Systems
C16S M-503 Hydraulic and Pneumatic Systems
608 C14 M M-601
Entrepreneurship and Project Management
C16S M-501Industrial Management & Entrepreneurship
609 C14 M M-602
Refrigeration & Air Conditioning
C16S M-506A Refrigeration & Air Conditioning
610 C14 M M-603
Energy Sources & Power Plant Engineering
C16S M-506CEnergy Sources & Power Plant Engineering
611 C14 M M-604 CAM C16S M-505 CAD/CAM
612 C14 M M-606
Automobile Engineering
C16S M-506B Automobile Engineering
613 C09 MET
MET-101
English C16 MET-101 English
614 C09 MET
MET-102
Engineering Mathematics - I
C16 MET-102Engineering Mathematics - I
615 C09 MET
MET-103
Engineering Physics C16 MET-103 Engineering Physics
616
C09 MET MET-104
Engineering Chemistry and Environmental
C16 MET-104 Engineering Chemistry and Environmental
File No.SBTET-EE-2/DE-2/16/2019-EE-2
Studies Studies617 C14 MET
MET-101
ENGLISH C16 MET-101 ENGLISH
618 C14 MET
MET-102
ENGINEERING MATHEMATICS - I
C16 MET-102ENGINEERING MATHEMATICS - I
619 C14 MET
MET-103
ENGINEERING PHYSICS
C16 MET-103ENGINEERING PHYSICS
620 C14 MET
MET-104
ENGINEERING CHEMISTRY ANDENVIRONMENTAL STUDIES
C16 MET-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
621 C14 MET
MET-105
MINERAL PROCESSING TECHNOLOGY
C16 Met-105Mineral Processing Technology
622 C14 MET
MET-106
ELEMENTS OF METALLURGICAL ENGINEERIG
C16 Met-106Elements Of Metallurgical Engineering
623 C14 MET
MET-107
ENGINEERING DRAWING
C16 Met-107 Engineering Drawing
624 C09 MET
MET-302
Engineering Mathematics - II
C16S MET-301Engineering Mathematics - III
625 C09 MET
MET-303
Fuels, Refractories and Polymetry
C16S Met-302Fuels Refractories andPyrometry
626 C09 MET
MET-304
Metallurgical thermodynamics
C16S Met-303Metallurgical Thermodynamics
627 C09 MET
MET-305
Physical metallurgy C16S Met-304 Physical Metallurgy
628 C09 MET
MET-306
Iron Making C16S Met-305 Iron Making
629 C09 MET
MET-307
Machine Drawing C16S Met-306 Machine Drawing
630 C09 MET
MET-402
Electrical Technology
C16S Met-402 Electrical Technology
631 C09 MET
MET-403
Heat Treatment Technology
C16S Met-405Heat Treatment Technology
632 C09 MET
MET-404
Steel making C16S Met-406 Steel Making
633 C09 MET
MET-405
Materials Testing C16S Met-403 Material Testing
634 C09 MET
MET-406
Foundry Technology
C16S Met-404 Foundry Technology
635 C09 MET
MET-702
Industrial Management and Enterpreneurship
C16S Met-701Industrial Management andEntrepreneurship
636 C09 MET
MET-703
Mechanical Metallurgy
C16S Met-704Mechanical Metallurgy
637 C09 MET
MET-704
Non - Ferrous extractive Metallurgy
C16S Met-705Non Ferrous ExtractiveMetallurgy
638 C09 MET
MET-705
Metal Casting Technology
C16S Met-703Metal Casting Technology
639 C09 MET
MET-706(A
Welding Technology
C16SMet-
702(A)Welding Technology
File No.SBTET-EE-2/DE-2/16/2019-EE-2
)
640 C09 MET
MET-706(B
)
Corrosion Engineering
C16SMet-
702(B)Corrosion Engineering
641 C14 MET
Met-301
Engineering Mathematics-II
C16S Met-301Engineering Mathematics-III
642 C14 MET
Met-302
Fuels Technology C16S Met-302Fuels Refractories andPyrometry
643 C14 MET
Met-303
Furnaces, Refractories & Pyrometry
C16S Met-302Fuels Refractories andPyrometry
644 C14 MET
Met-304
Metallurgical Thermodynamics
C16S Met-303Metallurgical Thermodynamics
645 C14 MET
Met-305
Physical Metallurgy C16S Met-304 Physical Metallurgy
646 C14 MET
Met-306
Iron Making C16S Met-305 Iron Making
647 C14 MET
Met-307
Machine Drawing C16S Met-306 Machine Drawing
648 C14 MET
Met-401
Engineering Mathematics-III
C16S Met-401Engineering Mathematics-IV
649 C14 MET
Met-402
Electrical Technology
C16S Met-402 Electrical Technology
650 C14 MET
Met-403
Material Testing C16S Met-403 Material Testing
651 C14 MET
Met-404
Foundry Technology
C16S Met-404 Foundry Technology
652 C14 MET
Met-405
Heat Treatment Technology
C16S Met-405Heat Treatment Technology
653 C14 MET
Met-406
Steel Making C16S Met-406 Steel Making
654 C14 MET
MET-701
Industrial Management and Entrepreneurship
C16S Met-701Industrial Management andEntrepreneurship
655 C14 MET
MET-703
Welding Technology
C16SMet-
702(A)Welding Technology
656 C14 MET
MET-704
Metal Casting Technology
C16S Met-703Metal Casting Technology
657 C14 MET
MET-705
Mechanical Metallurgy
C16S Met-704Mechanical Metallurgy
658 C14 MET
MET-706
Non-ferrous Extractive Metallurgy
C16S Met-705Non Ferrous ExtractiveMetallurgy
659 C09 MNG
MNG-101
English-I C16 MNG-101 English-I
660 C09 MNG
MNG-102
EngineeringMathematics – I
C16 MNG-102Engineering Mathematics – I
661 C09 MNG
MNG-103
Engineering Physics C16 MNG-103 Engineering Physics
662 C09 MNG
MNG-104
EngineeringChemistry &
Environmentalstudies
C16 MNG-104Engineering Chemistry & Environmental studies
663 C09 MNG
MNG-105
Elements of Mining C16 MNG-105 Elements Of Mining
File No.SBTET-EE-2/DE-2/16/2019-EE-2
664 C09 MNG
MNG-106
Mining Geology - I C16 MNG-106 Mining Geology - I
665 C09 MNG
MNG-107
EngineeringDrawing
C16 MNG-107Engineering Drawing
666 C14 MNG
MNG-101
ENGLISH C16 MNG-101 ENGLISH
667 C14 MNG
MNG-102
ENGINEERINGMATHEMATICS -
IC16 MNG-102
ENGINEERING MATHEMATICS - I
668 C14 MNG
MNG-103
ENGINEERINGPHYSICS
C16 MNG-103ENGINEERING PHYSICS
669 C14 MNG
MNG-104
ENGINEERINGCHEMISTRY ANDENVIRONMENTA
L STUDIES
C16 MNG-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
670 C14 MNG
MNG-105
ELEMENTS OFMINING
C16 MNG-105 Elements Of Mining
671 C14 MNG
MNG-106
MININGGEOLOGY - I
C16 MNG-106 Mining Geology - I
672 C14 MNG
MNG-107
ENGINEERINGDRAWING
C16 MNG-107Engineering Drawing
673 C09 MNG
MNG-302
EngineeringMathematics – II
C16S MNG-301Engineering Mathematics – III
674 C09 MNG
MNG-303
Basic ElectricalEngineering
C16S MNG-302Basic Electrical and Electronics Engineering
675 C09 MNG
MNG-304
Coal Mining C16S MNG-303Methods of working Coal-I
676 C09 MNG
MNG-305
Mining Geology –II
C16S MNG-306 Mining Geology-III
677 C09 MNG
MNG-306
Mine Surveying – I C16S MNG-305MINE SURVEYING-I
678 C09 MNG
MNG-402
Basic MechanicalEngineering
C16S MNG:402Basic Mechanical Engineering
679 C09 MNG
MNG-403
Metal Mining C16S MNG-404Methods of working Metal
680 C09 MNG
MNG-404
Mining Machinery– I
C16S MNG-304 Mining Machinery-I
681 C09 MNG
MNG-405
MineEnvironmental
Engineering C16S MNG-407 Mine Ventilation
682 C09 MNG
MNG-406
Mine Surveying – II C16S MNG-406 Mine Surveying-II
683 C09 MNG
MNG-407
Rock Mechanicsand Strata Control
C16S MNG-504Rock Mechanics and Strata Control
684 C09 MNG
MNG-602
Mine Managementand
Entrepreneurship C16S MNG-502
MineManagement andEnterprenurship
685 C09 MNG
MNG-603
Opencast Mining C16S MNG-501 :Surface Mining
686 C09 MNG
MNG-604
Mining Machinery– II
C16S MNG-405 Mine Machinery-II
687 C09 MNG
MNG-605
Mine Legislationand General Safety
C16S MNG-503:Mine Legilsation and General safety
File No.SBTET-EE-2/DE-2/16/2019-EE-2
688 C09 MNG
MNG-606A
Advanced MineEnvironmental
EngineeringC16S MNG506
Mine Environmental Engineering
689 C09 MNG
MNG-606B
AdvancedSurveying
C16SMNG505(
A)Advanced mine surveying
690 C14 MNG
MNG-301
EngineeringMathematics –II
C16S MNG-301Engineering Mathematics –III
691 C14 MNG
MNG-302
Basic Electrical andElectronicsEngineering
C16S MNG-302Basic Electrical and Electronics Engineering
692 C14 MNG
MNG-303
ConventionalMethods of coal
MiningC16S MNG-303
Methods of working Coal-I
693 C14 MNG
MNG-304
Mining Machinery– I
C16S MNG-304 Mining Machinery-I
694 C14 MNG
MNG-305
Mine Surveying-I C16S MNG-305MINE SURVEYING-I
695 C14 MNG
MNG-306
Mining Geology –II
C16S MNG-306 Mining Geology-III
696 C14 MNG
MNG-401
EngineeringMathematics -III
C16S MNG-401Engineering Mathematics -IV
697 C14 MNG
MNG-402
Basic MechanicalEngineering
C16S MNG:402Basic Mechanical Engineering
698 C14 MNG
MNG-403
MechanizedMethods of Coal
Mining C16S MNG-403
Methods of working Coal-II
699 C14 MNG
MNG-404
Mining Machinery– II
C16S MNG-405 Mine Machinery-II
700 C14 MNG
MNG-405
Mine Surveying-II C16S MNG-406 Mine Surveying-II
701 C14 MNG
MNG-406
MineEnvironmental
EngineeringC16S MNG-407 Mine Ventilation
702 C14 MNG
MNG-501
Metal Mining C16S MNG-404Methods of working Metal
703 C14 MNG
MNG-502
Opencast Mining C16S MNG-501 Surface Mining
704 C14 MNG
MNG-503
Modern CoalMining Technology
C16S MNG-403Methods of working Coal-II
705 C14 MNG
MNG-504
Rock Mechanicsand Strata control
C16S MNG-504Rock Mechanics and Strata Control
706 C14 MNG
MNG-505
AdvancedSurveying
C16SMNG-505(A)
Advanced Surveying
707 C14 MNG
MNG-506
Advanced MineEnvironmental
EngineeringC16S MNG-506
Mine Environmental Engineering
708 C14 MNG
MNG-601
Advanced MetalMining Methods
C16S MNG-404Methods of working Metal
709 C14 MNG
MNG-602
Advanced OpencastMining Methods
C16S MNG-501 Surface Mining
710 C14 MNG
MNG-603
MineManagementand
EntrepreneurshipC16S MNG-502
Mine Management and Entrepreneurship
File No.SBTET-EE-2/DE-2/16/2019-EE-2
711 C14 MNG
MNG-604
Mine Legislation C16S MNG-503Mine Legislation and General Safety
712 C14 MNG
MNG-605
Mine SafetyEngineering
C16S MNG-506Mine Environmental Engineering
713 C14 MNG
MNG-606
Mineral Processingand Quality control
C16SMNG-505(B)
Mineral Processing and Quality Control
714 C09 PKG
Pkg-101
English -I C16 Pkg-101 English -I
715 C09 PKG
Pkg-102
Engineering Mathematics - I
C16 Pkg-102Engineering Mathematics - I
716 C09 PKG
Pkg-103
Engineering Physics C16 Pkg-103 Engineering Physics
717 C09 PKG
Pkg-104
Engineering Chemistry and Environmental Studies
C16 Pkg-104
Engineering Chemistry and Environmental Studies
718 C09 PKG
Pkg-105
Elements of Packaging Technology
C16 Pkg-106ELEMENTS OF PACKAGING TECHNOLOGY
719 C09 PKG
Pkg-107
Engineering Drawing
C16 Pkg-107ENGINEERING DRAWING
720 C14 PKG
PKG-101
ENGLISH C16 PKG-101 ENGLISH
721 C14 PKG
PKG-102
ENGINEERING MATHEMATICS - I
C16 PKG-102ENGINEERING MATHEMATICS - I
722 C14 PKG
PKG-103
ENGINEERING PHYSICS
C16 PKG-103ENGINEERING PHYSICS
723 C14 PKG
PKG-104
ENGINEERING CHEMISTRY ANDENVIRONMENTAL STUDIES
C16 PKG-104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
724 C14 PKG 106
ELEMENTS OF PACKAGING TECHNOLOGY
C16 Pkg-106ELEMENTS OF PACKAGING TECHNOLOGY
725 C14 PKG 105
ENGINEERING MATERIALS & WORKSHOP TECHNOLOGY
C16 Pkg-105
ENGINEERING MATERIALS & WORKSHOP TECHNOLOGY
726 C14 PKG 107
ENGINEERING DRAWING
C16 Pkg-107ENGINEERING DRAWING
727 C09 PKG
Pkg-302
Engineering Mathenatics - II
C16S Pkg-301Engineering Mathenatics - III
728 C09 PKG
Pkg-303
Strength of materials and Fluid Mechanics
C16S PKG-302Strength of Materials & Fluid Mechanics
729 C09 PKG
Pkg-304
Packaging Materials -I
C16S PKG-303 Packaging Materials-I
730 C09 PKG
Pkg-305
Ancillary Packaging and Bulk Packaging
C16S PKG-304Ancillary Packaging Materials & Bulk Packaging
731 C09 PKG
Pkg-306
Electrical Engineeringand Basic Electronics
C16S PKG-305Basic Electrical and Electronics
File No.SBTET-EE-2/DE-2/16/2019-EE-2
Engineering732 C09 PKG
Pkg-307
Machine Drawing C16S PKG-306 Machine Drawing
733 C09 PKG
PKG-402
Packaging Materials -II
C16S PKG-404 Packaging Materials-II
734 C09 PKG
PKG-403
Drug and Pharmaceuticals Packaging
C16S PKG-502Drug and Pharmaceutcal Packaging
735 C09 PKG
PKG-404
Food Preservation Packaging
C16S PKG-505Food Preservaton Packaging
736 C09 PKG
PKG-405
Production Technology and Quality control ofPackages
C16S PKG-402Production Technology andIndustrial Engineering
737 C09 PKG
PKG-406
Thermal Engineering C16S PKG-403 Industrial Engineering
738 C09 PKG
PKG-407
Component Drawing C16S PKG-406 Component Drawing
739 C09 PKG
PKG-602
Industrial Management and Entrepreneurship
C16S PKG-501Industrial Management and Packaging Economics
740 C09 PKG
PKG-603
Product Packaging C16S PKG-503 Product Packaging
741 C09 PKG
PKG-604
Package design and Printing
C16S PKG-405Package Design and Printng
742 C09 PKG
PKG-605
Packaging Processes and Machinery
C16S PKG-504Packaging Processes and Machinery
743 C09 PKG
PKG-606(A)
Refrigeration and Air conditioning
C16S PKG-506AA. Refrigeraton and Cold Storage
744 C09 PKG
PKG-606(B)
Plate surface preparation and post press
C16S PKG-506CC. Plat Surface Preparaton & Post-Press
745 C14 PKG
PKG-301
Engineering Mathematics - II
C16S PKG-301Engineering Mathematics - III
746 C14 PKG
PKG-302
Mechanics of Solids C16S PKG-302Strength of Materials & Fluid Mechanics
747 C14 PKG PKG-
303Manufacturing Technology
C16S PKG-402Production Technology andIndustrial Engineering
748 C14 PKG
PKG-304 Basics of Electrical
& Electronics
C16S PKG-305Basic Electrical and Electronics Engineering
749 C14 PKG PKG-
305Packaging Materials - I
C16S PKG-303 Packaging Materials-I
750 C14 PKG
PKG-306
Ancillary PackagingMaterials
C16S PKG-304Ancillary Packaging Materials &Bulk Packaging
751 C14 PKG PKG-
307 Machine DrawingC16S PKG-306 Machine Drawing
752 C14 PKG
PKG-401
Engineering Mathematics - III
C16S PKG-401Engineering Mathematics - IV
753 C14 PKG
PKG-402
Fluid Mechanics & Pneumatics
C16S PKG-302Strength of Materials & Fluid Mechanics
File No.SBTET-EE-2/DE-2/16/2019-EE-2
754 C14 PKG
PKG-403
Principles of Thermodynamics
C16S PKG-403 Thermal Engineering
755 C14 PKG
PKG-404
Packaging Materials-II
C16S PKG-404 Packaging Materials-II
756 C14 PKG
PKG-405
Bulk Packaging C16S PKG-304Ancillary Packaging Materials &Bulk Packaging
757 C14 PKG
PKG-407
Component Drawing
C16S PKG-406 Component Drawing
758 C14 PKG
PKG-501
IndustrialEngineering & Quality Assurance
C16S PKG-402Production Technology andIndustrial Engineering
759 C14 PKG
PKG-502
Renewable Energy Sources
C16S M-506Renewable Energy Sources
760 C14 PKG
PKG-503
Drug andPharmaceuticalPackaging
C16S PKG-502Drug and Pharmaceutcal Packaging
761 C14 PKG
PKG-504
Food Preservation Packaging
C16S PKG-505Food Preservaton Packaging
762 C14 PKG
PKG-505
Packaging Design Engineering
C16S PKG-405Package Design and Printng
763 C14 PKG
PKG-506
Plate Surface Preparation and Post-Press
C16S PKG-506CPlat Surface Preparaton & Post-Press
764 C14 PKG
PKG-601
Industrial Management and Packaging Economics
C16S PKG-501Industrial Management and Packaging Economics
765 C14 PKG
PKG-602
Refrigeration and Cold storage
C16S PKG-506ARefrigeraton and ColdStoragePress
766 C14 PKG
PKG-603
Packaging processes and machinery
C16S PKG-504Packaging Processes and Machinery
767 C14 PKG
PKG-604
Product Packaging C16S PKG-503 Product Packaging
768 C14 PKG
PKG-605
Package Printing and Graphics
C16S PKG-405Package Design and Printng
769 C14 PKG
PKG-606
Packaging & the environment
C16S PKG-506BPackaging and Environment
770 C09 TT TT-101 English –I C16 TT-101 English-I
771 C09 TT TT-102
Engineering Mathematics-I
C16 TT-102Engineering Mathematics - I
772 C09 TT TT-103 Engineering Physics C16 TT-103 Engineering Physics
773 C09 TT TT-104
Engineering Chemistry & Environmental Studies
C16 TT-104Engineering Chemistry & Environmental studies
774 C09 TT TT-105
Basic MechanicalEngineering
C16S TT-306Basic Mechanical Engineering
775 C09 TT TT-106 Textile Raw Materials C16 TT-105 Textile fibres
776 C09 TT TT-107 Engineering Drawing C16 TT-107
ENGINEERING DRAWING
777 C14 TT 101 ENGLISH C16 TT-101 English-I
File No.SBTET-EE-2/DE-2/16/2019-EE-2
778 C14 TT 102
ENGINEERING MATHEMATICS - I
C16 TT-102Engineering Mathematics - I
779 C14 TT 103
ENGINEERING PHYSICS
C16 TT-103 Engineering Physics
780 C14 TT 104
ENGINEERING CHEMISTRY AND ENVIRONMENTAL STUDIES
C16 TT-104Engineering Chemistry & Environmental studies
781 C14 TT 105
BASIC MECHANICAL AND ELECTRICAL ENGINEERING
C16S TT-306Basic Mechanical Engineering
782 C14 TT 106 TEXTILE FIBRES C16 TT-105 Textile fibres
783 C14 TT 107
ENGINEERING DRAWING
C16 TT-107ENGINEERING DRAWING
784 C09 TT TT-302
EngineeringMathematics-II C16S TT-301
Engineering Mathematics–III
785 C09 TT TT-303
Spinning Technology–I C16S TT-205 Yarn Preparatory
786 C09 TT TT-304 Weaving Preparatory C16S TT-206 Weaving Preparatory
787 C09 TT TT-305
Weaving Technology-I C16S TT-303
Fabric Manufacture –I
788 C09 TT TT-306
Textile ChemicalProcessing-I C16S TT-304
Textile Chemical Processing – I
789 C09 TT TT-307
Knitting & Nonwoven Technology C16S TT-702
Advanced Textile Manufacture
790 C09 TT TT-402 Textile Calculations C16S TT-401 Textile Calculations
791 C09 TT TT-403
Spinning Technology–II C16S TT-302 Yarn Manufacture – I
792 C09 TT TT-404 Textile Testing C16S TT-406 Textile testing - I
793 C09 TT TT-405
Weaving Technology-II C16S TT-403
Fabric Manufacture –II
794 C09 TT TT-406
Textile ChemicalProcessing-II C16S TT-703
Textile Chemical Processing - II
795 C09 TT TT-407
Statistics & QualityControl C16S TT-706C
C) Quality Management in Textiles
796 C09 TT
TT-702
Textile MillManagement
&EntrepreneurshipC16S TT-701
Textile Mill Management
797 C09 TT
TT-704
Non ConventionalSpinning
C16S TT-702Advanced Textile Manufacture
798 C09 TT
TT-705
Advanced FabricManufacture
C16S TT-702Advanced Textile Manufacture
799 C09 TT
TT-706A
Technical Textiles C16S TT-706AA) Technical Textiles
800 C09 TT
TT-706C
GarmentTechnology
C16S TT-305Apparel Production Technology-I
801 C14 TT TT-301
Engineering Mathematics - II C16S TT-301
Engineering Mathematics–III
802 C14 TT TT-302 Yarn Manufacture - I C16S TT-205 Yarn Preparatory
80 C14 TT TT-303 Fabric Manufacture C16S TT-303 Fabric Manufacture –
File No.SBTET-EE-2/DE-2/16/2019-EE-2
3 -I I804 C14 TT TT-304
Textile Chemical Processing - I C16S TT-304
Textile Chemical Processing – I
805 C14 TT TT-305
Knitting and Nonwoven Technology
C16S TT-702Advanced Textile Manufacture
806 C14 TT TT-306
Apparel Production Technology C16S TT-305
Apparel Production Technology-I
807 C14 TT TT-401
Engineering Mathematics - III C16S TT-401
Engineering Mathematics- IV
808 C14 TT TT-402 Yarn Manufacture - II C16S TT-302 Yarn Manufacture – I
809 C14 TT TT-403
Fabric Manufacture -II C16S TT-403
Fabric Manufacture –II
810 C14 TT TT-404
Textile Chemical Processing - II C16S TT-703
Textile Chemical Processing - II
811 C14 TT TT-405 Textile Calculations C16S TT-401 Textile Calculations
812 C14 TT TT-406
Textile Testing & Quality Control - I C16S TT-406 Textile testing - I
813 C14 TT
TT-701
Textile Mill Management and Entrepreneurship
C16S TT-701Textile Mill Management
814 C14 TT
TT-702
Advanced Yarn Manufacture
C16S TT-702Advanced Textile Manufacture
815 C14 TT
TT-703
Advanced Fabric Manufacture
C16S TT-702Advanced Textile Manufacture
816 C14 TT
TT-705
Fabric Structure andDesign
C16S TT-404Fabric Structure and Design
817 C14 TT
TT-706
Textile Testing & Quality Control-II
C16S TT-704 Textile Testing -II
File No.SBTET-EE-2/DE-2/16/2019-EE-2
Annexure-II (Not mapping subjects)
Sl No. Branch Scheme Subject Code Subject Name
1 C09 A A-301 English-II
2 C09 A A-306Engineering Materials and Manufacturing
Process
3 C09 A A-401 English-III
4 C09 A A-601 English-IV
5 C09 AA AA-301 English-II
6 C09 AA AA-401 English-III
7 C09 AA AA-601 English-IV
8 C09 AEI AEI-301 English-II
9 C09 AEI AEI-401 English-III
10 C09 AEI AEI-601 English-IV
11 C09 C C-301 English-II
12 C09 C C-401 English-III
13 C09 C C-404 Quantty Surveying
14 C09 C C-601 English-IV
15 C09 CCP CCP-103 English Shorthand
16 C09 CCP CCP-303Ofce Organizaton and
Correspondence
17 C09 CH CH-301 English-II
18 C09 CH CH-307 Chemical Process Drawing
19 C09 CH CH-401 English-III
20 C09 CH CH-701 English-IV
21 C09 CM CM-105 Computer Fundamentals & programming in C
22 C09 CM CM-301 English-II
23 C09 CM CM-304 Digital Electronics & Computer Architecture
24 C09 CM CM-401 English-III
25 C09 CM CM-601 English-IV
26 C09 ECE EC-301 English-II
27 C09 ECE EC-303 Electronic Circuits - I
28 C09 ECE EC-401 English-III
29 C09 ECE EC-403 Communicaton Systems
30 C09 ECE EC-601 English-IV
31 C09 ECE EC-606(B) Computer Hardware
32 C09 EE EE-105 Basic Electrical Engineering
33 C09 EE EE-301 English-II
34 C09 EE EE-401 English-III
35 C09 EE EE-601 Englkish-IV
36 C09 FWT FW-401 English-II
37 C09 FWT FW-501 English-III
38 C09 FWT FW-701 English-IV
39 C09 M M-301 English-II
40 C09 M M-303 Engineering Mechanics
41 C09 M M-401 English-III
File No.SBTET-EE-2/DE-2/16/2019-EE-2
42 C09 M M-601 English-IV
43 C09 MET MET-105 Elementary Principles of Metallurgy
44 C09 MET MET-301 English-II
45 C09 MET MET-401 English-III
46 C09 MET MET-701 English-IV
47 C09 MNG MNG-301 English-II
48 C09 MNG MNG-401 English-III
49 C09 MNG MNG-601 English-IV
50 C09 PKG Pkg-301 English-II
51 C09 PKG PKG-401 English-III
52 C09 PKG PKG-601 English-IV
53 C09 TT TT-301 English–II
54 C09 TT TT-401 English–III
55 C09 TT TT-701 English–IV
56 C09 TT TT-703 Instrumentaton of Textle Machines
57 C09 TT TT-706B Mult Fiber Spinning
58 C09 TT TT-707 Textle Machine Drawing
59 C14 C C-407 Building Services Drawing
60 C14 CCP CCP-405 Mercantle Laws
61 C14 CM CM-406 Computer Networks
62 C14 CM CM-604 Data Communicaton
63 C14 ECE EC-106ELECTRONIC ENGINEERING MATERIALS &
PRACTICES
64 C14 ECE EC-604 COMPUTER HARDWARE
65 C14 EE EE-405 Electronics -II
66 C14 M M-105 Engineering Mechanics
67 C14 M M-506 Machine Tool Engineering
68 C14 M M-605 Measurement & Control Systems
69 C14 MET MET-702 Industrial Safety & Polluton Control
70 C14 PKG PKG-406 Plastcs in Packaging
71 C14 TT TT-704 Instrumentaton of Textle Machines
File No.SBTET-EE-2/DE-2/16/2019-EE-2