Standards - To be withdrawn - SABS BE WITHD… · · 2013-03-18Standards - To be withdrawn The...

Standards - To be withdrawnThe standards in this list are not intended to be replaced by any other standard. Comments to reach Standards South Africa before closing date. Please address comments to the Standards Information Centre, AGI1, or [email protected]: All other standards referring to the standards listed below will be amended to take into account the withdrawal, once approved.

SANS 69 (2004) (2012-08-16)

SANS 722 (SABS 722) (1982) (2009-12-14)

Framework for setting and implementing national ambient air quality standards

The production of infants' and children's shoes (stuck-on and stitch-down construction)

13.040.20

61.060

A4 25p EN PDF 25p EN


1

3

Ed

Ed

Am 1(National),

Gr

Gr

Defines the basic principles of a strategy for ambient air quality in South Africa, to avoid, prevent or reduce harmful effects on human healthand the environment as a whole, taking into account technical, economic, social, political and strategic considerations.

Covers 4 types of infants' and children's shoes made to the stuck-on and stitch-down principles in one or both size ranges 105-145 and 150-205. Methods of construction are specified.

ICS

ICS

9

11

Reason for withdrawal:


The standard is obsolete

The standard covers outdated processes, material and manufacturing principles.

Other standards that reference this standard:


Stage: 95.20 (2012-05-12)

Stage: 95.20 (2009-09-17)


SANS 779 (SABS 779) (1972) (2005-02-13)

SANS 899 (SABS 899) (1987) (2012-02-14)

Invalid chairs

Insecticidal space sprays in pressurized aerosol dispensers

11.140 11.180.10

65.100.10


A5 9p ENLoose-leafPDF 9p EN

2

3

Ed

Ed

Err 1(National),Am 1(National),

Gr

Gr

Covers requirements for material, design, dimensions, construction, finish and efficiency of brakes of one type of wheeled invalid chair foruse in hospitals and other medical institutions.

Covers the requirements for insecticidal space sprays for household and industrial use and for the disinsectization of aircraft. SABS 898must be read with this specification.

ICS

ICS

;6

6



Model is no longer manufactured and has been replaced by the new 'porter chair' model. SANS 1060 will berevised to incorporate all information pertaining to the new model

The committee reached an agreement that the standard was no longer needed.



SANS 10133 (SABS 0133) (2011) ;

Stage: 95.20 (2004-11-29)

Stage: 95.20 (2011-11-30)


SANS 964 (SABS 964) (2008) (2008-10-14)

SANS 1039 (SABS 1039) (2008) (2008-11-14)

Solas life-jackets

Wooden ceiling and panelling boards

13.340.70

79.080 91.060.30



3.01

1.03

Ed

Ed

Am 1(National),

Am 1(National),Am 2(National),Am 3(National),

Gr

Gr

Specifies requirements for the safety, construction, performance, sizing, marking and test methods for Solas life-jackets.

Covers three grades of profiled boards (planed or planed and sanded) manufactured from hardwood or softwood timber and intended foruse in ceilings or panelling.

ICS

ICS ;

9

8



At a revival technical committee plenary meeting held in Cape Town on 8 April 2008, all the stakeholdersunanimously voted for the withdrawal of SANS 964, because with the amendment of VC 8032 compliance withSANS 12402 Pts 1 to 10 were made mandatory, and conflict and confusion could be created in the market place ifSANS 964 is not withdrawn.

Standard is obsolete as indicated by SABS SC 1008B in their meeting of 24 June 2008



Stage: 95.20 (2008-07-08)

Stage: 95.20 (2008-08-28)


SANS 1147 (SABS 1147) (2001) (2007-11-14)

SANS 1700-7-7 (2003) (2010-07-10)

Leather school bags and school brief-cases

Fasteners Part 7: External drive hexagon bolts and screws Section 7: Hexagon bolts for high-strength structural bolting with largewidth across flats (thread lengths according to SABS ISO 888) - Product grade C - Property classes 8.8 and 10.9

59.140.35

21.060.10



1.01

1

Ed

Ed

Am 1(National),

Gr

Gr

ISO 7411:1984, idt

Leather, bags, briefcases, schools

Gives specifications for large series hexagon, high-strengh structural bolts with metric dimensions in property classes 8.8 and 10.9, andthread sizes from M12 up to and including M36, with thread lengths according to ISO 888.

ICS

ICS

10

7



The standard was developed in 1977 and has since become obsolete due to the fact that the specific styles ofschool briefcases are no longer manufactured

ISO has withdrawn their standard without replacement and the committee agreed to the withdrawal of the SANSversion.



Stage: 95.20 (2007-08-31)

Stage: 95.20 (2010-04-30)


SANS 1700-7-8 (2003) (2010-07-10)

SANS 1700-14-8 (2003) (2010-07-10)

Fasteners Part 7: External drive hexagon bolts and screws Section 8: Hexagon bolts for high-strength structural bolting with largewidth across flats (short thread length) - Product grade C - Property classes 8.8 and 10.9

Fasteners Part 14: Hexagon nuts Section 8: Hexagon nuts for high-strength structural bolting with large width across flats -Product grade B - Property classes 8 and 10

21.060.10

21.060.20



1

1

Ed

Ed

Gr

Gr

ISO 7412:1984, idt

ISO 4775:1984, idt

Gives specifications for large series hexagon, high-strength structural bolts with metric dimensions in property classes 8.8 and 10.9, andthread sizes from M12 up to and including M36, with short thread lengths.

Gives specifications for large series hexagon, high-strength structural nuts with metric dimensions in property classes 8 and 10 and threadsizes from M12 up to and including M36 for use with high-strength structural bolts of property classes 8.8 and 10.9.

ICS

ICS

6

6







Stage: 95.20 (2010-04-30)

Stage: 95.20 (2010-04-30)


SANS 1700-14-9 (SABS 1700-14-9) (1996) (2010-07-10)

SANS 1700-14-10 (2003) (2010-07-10)

Fasteners Part 14: Hexagon nuts Section 9: Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) -Product grades A and B - Property classes 5, 6 and 8

Fasteners Part 14: Hexagon nuts Section 10: Hexagon nuts for structural bolting with large width across flats, style 1 - Productgrade B - Property class 10

21.060.20

21.060.20



1

1

Ed

Ed

Am 1(National),

Gr

Gr

ISO 7413:1984, idt

ISO 7414:1984, idt

Gives specifications for hexagon nuts, style 1, with metric dimensions in property classes 5,6 and 8, hot-dip galvanized in accordance withISO 1461 and tapped oversize to tolerance class 6AX. Covers thread sizes from M10 up to and including M36, product grade A for sizes upto and including M16, and product grade B for sizes over M16.

Gives specifications for large series hexagon nuts, style 1, property class 10, with metric dimensions and thread sizes from M12 up to andincluding M36, for use with bolts of property class 10.9.

ICS

ICS

6

6







SANS 1806 (SABS 1806) (2009) ; SANS 207 () (2011) ;

Stage: 95.20 (2010-04-30)

Stage: 95.20 (2010-04-30)


SANS 1700-14-11 (2003) (2010-07-10)

SANS 1700-16-8 (2004) (2010-07-10)

Fasteners Part 14: Hexagon nuts Section 11: Hexagon nuts for structural bolting, Style 2, hot-dip galvanized (oversize tapped) -Product grade A - Property class 9

Fasteners Part 16: Washers Section 8: Plain washers for high-strength structural bolting, hardened and tempered

21.060.20

21.060.30



1

1

Ed

Ed

Gr

Gr

ISO 7417:1984, idt

ISO 7415:1984, idt

Gives specifications for hexagon nuts, style 2, with metric dimensions, property class 9 hot-dip galvanized in accordance with ISO 1461(published in South Africa as an identical adoption under the designation SANS 121) and tapped oversize to tolerances class 6AX. Coversproduct grade A nuts in thread diameters from M10 up to and including M16.

Specifies hardened and tempered circular washers intended for assembly with large series hexagon high-strength structural bolts and nutsof diameters from M12 to M36 inclusive.

ICS

ICS

5

5







Stage: 95.20 (2010-04-30)

Stage: 95.20 (2010-04-30)


SANS 1700-16-9 (2004) (2010-07-10)

SANS 1701-2-29 (SABS 1701-2-29) (1996)

Fasteners Part 16: Washers Section 9: Plain washers, chamfered, hardened, and tempered for high-strength structural bolting

Bearings Part 2: Rolling bearings Section 29: Explanatory notes on ISO 281-1:1977

21.060.30

21.100.20


A4 69p ENNot soldseparately,refer SANS1701 setPDF 69p EN

1

1

Ed

Ed

Gr

Gr

ISO 7416:1984, idt

ISO/TR 8646:1985, idt

Specifies chamfered, hardened and tempered circular washers intended for assembly with large series hexagon high-strength structuralbolts and nuts of diameters from M12 to M36 inclusive.

Gives supplementary background information regarding the derivation of formulae and factors given in ISO 281-1.

ICS

ICS

5

14




SANS 1701-2-29 (ISO/TR 8646) is a technical report containing explanatory notes on the withdrawn documentISO 281-1:1977 which has been replaced by SANS 354/ISO 281:1990



Stage: 95.20 (2010-04-30)

Stage: 95.20 (2005-03-31)


SANS 2882 (2003) (2007-05-14)

SANS 2883 (2003) (2007-05-14)

Rubber, vulcanized - Antistatic and conductive products for hospital use - Electrical resistance limits

Rubber, vulcanized - Antistatic and conductive products for industrial use - Electrical resistance limits

83.060

83.060

A4 4p EN PDF 4p EN

A4 4p EN PDF 4p EN

1

1

Ed

Ed

Gr

Gr

ISO 2882:1979, idt

ISO 2883:1980, idt

Specifies the limits for electrical resistance for certain antistatic and conductive products for hospital use.

Specifies limits for electrical resistance for certain antistatic and conductive products for industrial use.

ICS

ICS

4

4



Test method no longer in use




Stage: 91.60 (2009-07-31)

Stage: 91.60 (2009-07-31)


SANS 5004 (SABS SM 4) (1987) (2007-02-15)

SANS 5560 (SABS SM 560) (2005) (2011-04-10)

Sterility of antibiotics and preparations containing antibiotics

Pigment volume concentration of paints with a non-aqueous solvent base

11.080.99 11.100

87.060.10


A4 6p EN PDF 6p EN

3

3

Ed

Ed

Gr

Gr

Covers the determination of sterility of antibiotics and preparations containing antibiotics. Includes methods for the determination of bacterialand mould and yeast contamination of penicillin and penicillin derivatives that can be inactivated with penicillinase. Also gives a method forthe determination of the sterility of penicillin preparations that cannot be inactivated with penicillinase or that also contain other antibiotics.

Specifies a method for the determination of the pigment volume concentration of paints with a non-aqueous solvent base. The values forrelative density of the solvent, pigment content of the paint, relative density of the pigment, volatile matter content of the paint and non-volatile vehicle content of the paint that are used in the calculations, are obtained separately.

ICS

ICS

;3

4



Reviewed, to withdraw

The solvent extraction method for PVC is no longer used as it uses unsafe solvents. The users now calculate theirown PVC values, and hence the standard is outdated and no longer selling.



Stage: 95.20 (2006-11-15)

Stage: 95.20 (2011-01-14)


SANS 5571 (SABS SM 571) (2007) (2011-09-10)

SANS 5573 (SABS SM 573) (1970) (2009-04-14)

Pesticides - Insecticidal oil-based space sprays in low-pressurized dispensers - Determination of non-volatile content

Pesticides: insecticidal oil-based space sprays in low-pressurized dispensers: determination of staining effect on painted surfaces

55.130 65.100.01

55.130 65.100.01

A4 3p EN PDF 3p EN


3

2

Ed

Ed

Gr

Gr

Specifies a method for the determination of non-volatile matter content of insecticidal oil-based space sprays in low-pressurized dispensers.

Specifies a method for the determination of the staining effect of insecticidal oil-based space sprays in low-pressurized dispensers, onpainted surfaces.

ICS

ICS

;

;

3

3



The document is to be replaced by a document published by Collaborative International Pesticides AnalyticalCouncil (CIPAC), and the committee agreed to have it withdrawn.

SC 1028C agreed to the withdrawal of the standard as it is obsolete as most modern sprays do not stain.



SANS 899 (SABS 899) (1987) ;

SANS 5574 (SABS SM 574) (1970) ; SANS 899 (SABS 899) (1987) ;

Stage: 95.20 (2011-06-15)

Stage: 95.20 (2009-01-30)


SANS 5574 (SABS SM 574) (1970) (2009-04-14)

SANS 5908 (SABS SM 908) (1979) (2007-06-14)

Pesticides: Insecticidal oil-based space sprays in low-pressurized dispensers: determination of staining effect on multifibre testfabric

Pyrometric cone equivalent (refractoriness) of refractory bricks and materials

55.130 65.100.01

91.100.15 91.100.25



2

1

Ed

Ed

Gr

Gr

Specifies a method for the determination of the staining effect of insecticidal oil-based space sprays in low-pressurized dispensers onmultifibre test fabric.

Specifies a method for the determination of the pyrometric cone equivalent (refractoriness) of refractory bricks and materials.

ICS

ICS

;

;

1

3



SC 1028C agreed to the withdrawal of the standard as it is obsolete as most modern sprays do not stain.

The standard is not used by the industry and no copies were sold in the past 3 years



SANS 899 (SABS 899) (1987) ;

Stage: 95.20 (2009-01-30)

Stage: 90.60 (2013-02-20)


SANS 5910 (SABS SM 910) (1979) (2007-06-14)

SANS 6211-2 (2003) (2011-08-10)

Creep of refractory bricks in compression

Domestic solar water heaters Part 2: Thermal performance using an indoor test method

91.100.15 91.100.25

19.060 27.160 91.140.65 97.100.99


A4 6p EN PDF 6p EN

1

1

Ed

Ed

Gr

Gr

Specifies a method for the determination of the creep of refractory bricks in compression at high temperature or after heat treatment. Therate of creep as a function of time is evaluated from the percentage change in the height of the test specimen.

Specifies an indoor test method for the determination of the thermal performance of domestic solar water heating systems for potable waterand of storage capacity not exceeding 0,3 m(cubed).

ICS

ICS

;

; ; ;

3

4



The standard is not used by the industry and no copies were sold in the past 3 years

The committee agreed in their meeting held on 24 February 2011 that SANS 6211-2 be withdrawn immediatelyand in the event that it is required in the future it can be reinstated.



Stage: 90.60 (2013-02-20)

Stage: 95.20 (2011-05-31)


SANS 6471 (2003) (2007-05-14)

SANS 9048 (SABS ISO 9048) (1987) (2013-01-14)

Rubber, vulcanized - Determination of crystallization effects under compression

Building construction - Jointing products - Determination of extrudability of sealants using standardized apparatus

83.060

91.100.50


A4 8p EN PDF 8p EN

1

1

Ed

Ed

Gr

Gr

ISO 6471:1994, idt

ISO 9048:1987, idt

Specifies a method for the determination of the tendency of vulcanized rubbers to crystallize, and the time dependence of crystallization, bymeasurement of the recovery of compressed test pieces. Crystallization, which occurs more rapidly under high compression, reduces therecovery process.

Specifies a method for the determination of extrudability of one-component or multi-component sealants regardless of the kind of packagesin which they are supplied or from which they are applied to joints in buildings.

ICS

ICS

7

7




ISO 9048 has been withdrawn by ISO without any replacement.



Stage: 91.60 (2009-07-31)

Stage: 95.20 (2012-10-17)


SANS 10055-2 (2003) (2012-10-12)

SANS 10055-4 (2003) (2012-10-12)

ISO 9001:2000 Process auditing Part 2: ISO 9001 Process capability model and compliance indicators

ISO 9001: 2000 Process auditing Part 4: Process performance model and work products for information technology

03.120.20

03.120.20



1

1

Ed

Ed

Gr

Gr

Defines a model for describing process capability from a SANS 9001 perspective. The model describes a framework for evaluating thecapability of processes by examining a series of process attributes structured into capability levels. The definitions of the process attributesand outcomes have been aligned with compliance requirements that arise from SANS 9001. The model provides a focused organizationalgrowth path for process improvement, defect prevention, and adopting innovative practices. It also describes a set of SANS 9001"compliance indicators" which are a set of questions based on the "shall" requirements from this part of SANS 10055. These complianceindicators are intended to be used for preliminary assessment of the documented management system before formal registration.

Describes a process performance model for use in the information technology sector.

ICS

ICS

12

15



The committee agreed that the standard is no longer beneficial (Obsolete)

The committee agreed that the standard is no longer beneficial (Obsolete)



Stage: 95.20 (2012-07-16)

Stage: 95.20 (2012-07-16)


SANS 10161 (SABS 0161) (1980) (2009-06-14)

SANS 14041 (SABS ISO 14041) (1998) (2011-09-10)

The design of foundations for buildings

Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis

91.080.40 93.020

13.020.01



1

1

Ed

Ed

Am 1(National),Am 2(National),Am 3(National),

Am 1(National),

Gr

Gr

ISO 14041:1998, idt

Covers the design of foundations for buildings but excludes engineering structures such as reservoirs, water towers, petrol and other fueltanks, etc. Contains recommendations with regard to site investigations and inspections, materials, design considerations, earthworks andexcavations, and foundation types.

Specifies the requirements and the procedure necessary for the compilation and preparation of the definition of goal and scope for a LifeCycle Assessment (LCA), and for performing, interpreting and reporting a Life Cycle Inventory analysis (LCI).

ICS

ICS

;13

11



At a meeting of TC 59, held on 2007-05-14, it was agreed that the standard should be withdrawn.

ISO has withdrawn the source standard.



SANS 10082 (SABS 082) (2007) ; SANS 10209 (SABS 0209) (2003) ; SANS 10263-0 () (2010) ; SANS 10206(SABS 0206) (2010) ; SANS 10249 (SABS 0249) (2012) ; SANS 517 () (2011) ;

Stage: 90.60 (2013-02-20)

Stage: 95.20 (2011-06-29)


SANS 14042 (SABS ISO 14042) (2000) (2011-09-10)

SANS 14043 (SABS ISO 14043) (2000) (2011-09-10)

Environmental management - Life cycle assessment - Life cycle impact assessment

Environmental management - Life cycle assessment - Life cycle interpretation

13.020.10 13.020.60

13.020.10 13.020.60



1

1

Ed

Ed

Am 1(National),

Am 1(National),

Gr

Gr

ISO 14042:2000, idt

ISO 14043:2000, idt

Describes and gives guidance on a general framework for the life cycle impact assessment (LCIA) phase of life cycle assessment(LCA),and the key features and inherent limitations of LCIA, it specifies requirements for conducting the LCIA phase and the relationship of LCIAto the other LCA phases.

Provides requirements and recommendations for conducting the life cycle interpretation in LCA or LCI studies, does not describe specificmethodologies for the life cycle interpretation phase of LCA and LCI studies.

ICS

ICS

;

;

10

10







Stage: 95.20 (2011-06-29)

Stage: 95.20 (2011-06-29)


SANS 50196-4 (SABS ENV 196-4) (1993) (2013-05-14)

SANS 60034-18-21 (SABS IEC 60034-18-21) (1992) (2011-12-10)

Methods of testing cement Part 4: Quantitative determination of constituents

Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 21: Test procedures for wire-woundwindings - Thermal evaluation and classification

91.100.10

29.080.01 29.160.01



1

1

Ed

Ed

Am 1(National),

Am 1, 1995-02-01Am 1(National),Am 2, 1997-04-14

Gr

Gr

ENV 196-4:1993, mod

IEC 60034-18-21:1992, idt

Lays down the procedures for determining the contents of the constituents of cements that fall within the scope of ENV 197-1.

Gives test procedures for the thermal evaluation and classification of insulation systems used or proposed for use in wire-wound a.c. or d.c.rotating electrical machines. The test procedures are comparative in that the performance of a candidate insulation system is compared tothat of a reference insulation system with proven service experience. Shall be used in conjunction with IEC 60034-18-1 (published in SouthAfrica as an identical adoption under the designation SANS 60034-18-1).

ICS

ICS ;

12

9



On the meeting held on the 27 November 2012 SABS SC59A requested the standard to be withdrawn because isno longer needed by the industry.

This standard is no longer relevant to the South African market and there are no test facilities in South Africa totest to this standard.



Stage: 95.20 (2013-02-07)

Stage: 95.20 (2011-09-13)


SANS 60034-18-31 (SABS IEC 60034-18-31) (1992) (2011-12-10)

SANS 60034-18-34 (2006) (2011-12-10)

Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 31: Test procedures for form-woundwindings - Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV

Rotating electrical machines Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings -Evaluation of thermomechanical endurance of insulation systems

29.080.01 29.160.01

29.080.30



1

1

Ed

Ed

Am 1(National),Am 1, 1996-11-01

Gr

Gr

IEC 60034-18-31:1992, idt

IEC 60034-18-34:2000, idt

Gives test procedures for the thermal evaluation and classification of insulation systems used or proposed for use in a.c. or d.c. rotatingelectrical machines up to and including 50 MVA and 15 kV using form-wound windings. The test procedures are comparative in that theperformance of a candidate insulation system is compared to that of a reference insulation system with proven service experience. Shall beused in conjunction with IEC 60034-18-1 (published in South Africa as an identical adoption under the designation SANS 60034-18-1).

Gives test procedures for the evaluation of thermomechanical cycle endurance of insulation systems for form-wound windings.

ICS

ICS

;10

8







Stage: 95.20 (2011-09-13)

Stage: 95.20 (2011-09-13)


ARP 007 (1992) (2010-02-14)

CKS 8 (1977) (2013-06-14)

The care, maintenance and use of motor vehicle tyres and rims (incorporating TREDCO guidelines)

Melamine tableware

43.040.50 83.160.10

97.040.60



2

2

Ed

Ed

Am 1, 1994-07-05

Gr

Gr

Sets out practices relevant to the care, maintenance and use of motor vehicle tyres and rims.

Covers heavy duty and light duty tableware of melamine formaldehyde. Specifies material, design, dimensions, colour, decorations,workmanship and resistance to sulphuric acid, boiling water and heat.

ICS

ICS

;9

6



There is no further need for this standard since the contents of this document is covered in SANS 1550 - Motorvehicle tyres and rims - Dimensions and loads Parts 1 to 7 and 10.

The standard is obsolete



Stage: 95.20 (2009-11-26)

Stage: 95.20 (2013-03-12)


CKS 81 (1971) (2013-06-14)

CKS 94 (1967) (2013-06-14)

Galvanized mild steel hot water cylinders

Tinned steel milk buckets

91.140.65 97.100.99

65.040.10 77.140.01


A4 4p EN PDF 4p EN

2

1

Ed

Ed

Am 1, 1971-07-01

Gr

Gr

Covers galvanized mild steel hot water cylinders for use in the vertical position. Specifies the grade (according to the maximum workingpressure for which they are suitable), material, capacity, dimensions, dished and flanged ends, supports, connections, handholes,manholes, welding, finish and strength.

Covers tinned steel milk buckets of capacity 9 litres. Specifies materials, capacity, construction and tin coating.

ICS

ICS

;

;

6

4



The document has become obsolete




Stage: 95.20 (2013-03-12)

Stage: 95.20 (2013-03-12)


CKS 97 (1984) (2013-06-14)

CKS 135 (1984) (2013-06-14)

Paper-cutting scissors for office use

Paper-cutting scissors for school use

97.180

97.180

A4 3p EN PDF 3p EN

A4 3p EN PDF 3p EN

2

2

Ed

Ed

Am 1, 1995-03-01Am 2, 1997-03-01

Am 1, 1988-05-01Am 2, 1997-03-01

Gr

Gr

Covers alloyed carbon steel and stainless steel paper-cutting scissors for use in offices. Specifies material, size, blades, finger rings,adjustment, finish and performance.

Covers alloyed carbon steel and stainless steel paper cutting scissors for use in schools. Specifies the requirements for the material, size,blades, finger rings, adjustment, finish and performance.

ICS

ICS

4

4







Stage: 95.20 (2013-03-12)

Stage: 95.20 (2013-03-12)


CKS 183 (1969) (2013-06-14)

CKS 451 (1976) (2011-07-10)

Inflatable splints (polyvinyl chloride)

Anti-intruder fences

11.140 11.160

13.310 91.090

A4 4p EN PDF 4p EN


1

1

Ed

Ed

Am 1, 1981-04-01

Gr

Gr

Covers inflatable splints made of polyvinyl chloride film for aid and hospital use. Specifies materials, design, dimensions, flammability,breaking strength of zip-fastener, resistance to air pressure, wall thickness, tensile strength, elongation, tearing strength, volatile mattercontent, water absorption, dimensional stabilty and resistance to heataging.

Covers anti-intruder fences consisting of chain link (diamond) mesh and barbed wires. Specifies requirements for materials, dimensions,construction, welding and finish of the components, and requirements for design, erection and workmanship of the fence.

ICS

ICS

;

;

4

9




The committe SC 1014 E Security Barriers, discussed the document at their meeting held end 2010 and took thedecision that it is obolete.



Stage: 95.20 (2013-03-12)

Stage: 95.20 (2011-04-18)


CKS 503 (1978) (2011-06-10)Coal tar fuels

75.160.20A4 3p EN PDF 3p EN

1Ed

Am 1, 1989-06-01

Gr

Covers the requirements for 5 viscosity grades of coal tar fuel intended for use in industrial oil-fired furnaces equipped, except when fuelgrade CTF 0 is to be used, with suitable preheating facilities. Specifies general requirements, compatibility, storage stability and graderequirements.

ICS4

Reason for withdrawal: The standard is obsolete.Other standards that reference this standard:

Stage: 90.70 (2012-02-23)

Standards - To be withdrawn - SABS BE WITHD… · · 2013-03-18Standards - To be withdrawn The...

Documents

Transcript of Standards - To be withdrawn - SABS BE WITHD… · · 2013-03-18Standards - To be withdrawn The...