STANDARDS As of 21 January 2019 - BPS S&C Portal · Steel castings -- Magnetic particle inspection...

Steel castings -- Magnetic particle inspection ISO 4986:2010 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal CastingsSteel castings -- Liquid penetrant inspection ISO 4987:2010 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal CastingsSteel castings -- Ultrasonic examination -- Part 1: Steel castings for general purposes ISO 4992-1:2006 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings

Steel castings -- Ultrasonic examination -- Part 2: Steel castings for highly stressed components ISO 4992-2:2006 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings

Steel and iron castings -- Radiographic testing ISO 4993:2015 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature ISO 6892-2:2018 New Preparation 77.040.10 BPS/TC 33 Metal Castings

Metallic materials -- Tensile testing -- Part 3: Method of test at low temperature ISO 6892-3:2015 New Preparation 77.040.10 BPS/TC 33 Metal Castings

Metallic materials -- Tensile testing -- Part 4: Method of test in liquid helium ISO 6892-4:2015 New Preparation 77.040.10 BPS/TC 33 Metal Castings

Specification and qualification of welding procedures for production welding of steel castings ISO 11970:2016 New Preparation 25.160.10; 77.140.80 BPS/TC 33 Metal Castings

Steel and iron castings -- Visual examination of surface quality ISO 11971:2008 New Preparation 77.140.80; 77.040.20 BPS/TC 33 Metal Castings

Investment castings (steel, nickel alloys and cobalt alloys) -- General technical requirements ISO 16468:2015 New Preparation 77.140.80 BPS/TC 33 Metal Castings

Visual examination of the surface condition of investment castings -- Steel, nickel alloys and cobalt alloys ISO 19959:2005 New Preparation 77.140.80 BPS/TC 33 Metal Castings

Metallic materials -- Uniaxial creep testing in tension -- Method of test PNS ISO 204:2005 Revision Preparation 77.040.10 BPS/TC 33 Metal Castings

Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature PNS ISO 6892:2007 Revision Preparation 77.040.10 BPS/TC 33 Metal Castings

Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method PNS ISO 14577-1:2005 Revision Preparation 77.040.10 BPS/TC 33 Metal Castings

Metallic materials -- Calibration and verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Calibration and verification of the force-measuring system

PNS ISO 7500-1:2005 Revision Preparation 77.040.10 BPS/TC 33 Metal Castings

Metallic materials -- Verification of static uniaxial testing machines -- Part 2: Tension creep testing machines -- Verification of the applied force


Metallic materials -- Calibration of extensometer systems used in uniaxial testing PNS ISO 9513:2005 Revision Preparation 77.040.10 BPS/TC 33 Metal Castings

Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks


Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests PNS 687:1990 Revision Preparation 25.220.40 BPS/TC 33 Metal Castings

Metallic materials -- Conversion of hardness values PNS ISO 18265:2005 Revision Preparation 77.040.10 BPS/TC 33 Metal CastingsBrake fluid DOT 4 New Preparatory 43.040.40; 75.120 BPS/TC 44 Road VehiclesHeadlamps (including R2 and/or HS1 lamps) UNECE R 1 New Preparatory 43.180 BPS/TC 44 Road VehiclesSealed Beam headlamps UNECE R 5 New Preparatory 43.180 BPS/TC 44 Road Vehicles

BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS

INTERNATIONAL CLASSIFICATION FOR

STANDARDS(ICS)

TECHNICAL COMMITTEESUBJECT PROJECT REFERENCESTATUS

[New/Revision (Amd./Cor.)/Reconfirmation]

STAGES OF DEVELOPMENT1. Preparatory

2. Organization Meeting3. Drafting/Deliberation

4. Circulation5. Finalization

6. Approval

BUREAU OF PHILIPPINESTANDARDS

PROPOSED WORK PROGRAM FOR 2019As of 21 January 2019

1 of 47


STANDARDS(ICS)






6. Approval



Safety-belt anchorages UNECE R 14 New Preparatory 43.040.80 BPS/TC 44 Road VehiclesSafety-belts UNECE R 16 New Preparatory 43.040.80 BPS/TC 44 Road VehiclesGuide for addressing accessibility in standards ISO/IEC Guide 71:2014 New Preparatory 13.180; 01.120; 11.180.01 BPS/TC 44 Road VehiclesGraphical symbols -- Public information symbols ISO 7001:2007 New Preparatory 01.080.10 BPS/TC 44 Road VehiclesCodification of Standards in a motor vehicle DPNS xxxx:20XX New Preparatory 43.040.01 BPS/TC 44 Road VehiclesAdapting accessibility in the Jeepney design DPNS xxxx:20XX New Preparatory 43.040.01;13.180; 11.180.01 BPS/TC 44 Road VehiclesPUV Class 4 Dimensions DPNS xxxx:20XX New Preparatory 43.040.01 BPS/TC 44 Road VehiclesRoad vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

PNS ISO 7631:2013 Reconfirmation Preparatory 43.040.40; 83.140.50 BPS/TC 44 Road Vehicles

Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)


Road vehicles -- Hydraulic braking systems -- Simple flare pipes, tapped holes, male fittings and hose end fittings PNS ISO 4038:2013 Reconfirmation Preparatory 43.040.40; 83.140.40 BPS/TC 44 Road Vehicles

Road vehicles -- Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid PNS ISO 6120:2013 Reconfirmation Preparatory 43.040.40; 83.140.40 BPS/TC 44 Road Vehicles

Road vehicles -- Thermoplastics tubing for air braking systems PNS ISO 7628:2013 Reconfirmation Preparatory 43.040.40; 83.140.30 BPS/TC 44 Road Vehicles

Road vehicles -- Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)


Road vehicles -- Pneumatic braking connections between motor vehicles and towed vehicles -- Interchangeability PNS ISO 1728:2013 Reconfirmation Preparatory 43.040.40 BPS/TC 44 Road Vehicles

Road vehicles -- Pressure test connection for compressed-air pneumatic braking equipment PNS ISO 3583:2013 Reconfirmation Preparatory 43.040.40 BPS/TC 44 Road Vehicles

Road vehicles -- Hydraulic pressure test connection for braking equipment PNS ISO 3803:2013 Reconfirmation Preparatory 43.040.40 BPS/TC 44 Road Vehicles

Road vehicles -- Labelling of containers for petroleum-based or non-petroleum-based brake fluid PNS ISO 3871:2013 Reconfirmation Preparatory 43.040.40; 75.120 BPS/TC 44 Road Vehicles

Road vehicles -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid PNS ISO 3996:2013 Reconfirmation Preparatory 43.040.40; 83.140.40 BPS/TC 44 Road Vehicles

Road vehicles -- Pneumatic braking systems -- Part 1: Pipes, male fittings and tapped holes with facial sealing surface PNS ISO 4039-1:2013 Reconfirmation Preparatory 43.040.40 BPS/TC 44 Road Vehicles

Road vehicles -- Pneumatic braking systems -- Part 2: Pipes, male fittings and holes with conical sealing surface PNS ISO 4039-2:2013 Reconfirmation Preparatory 43.040.40 BPS/TC 44 Road Vehicles

Road vehicles -- Specification of non-petroleum-base brake fluids for hydraulic systems PNS ISO 4925:2013 Reconfirmation Preparatory 75.120; 43.040.40 BPS/TC 44 Road Vehicles

Road vehicles -- Hydraulic braking systems -- Non-petroleum-base reference fluids PNS ISO 4926:2013 Reconfirmation Preparatory 75.120; 43.040.40 BPS/TC 44 Road Vehicles

Road vehicles -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid

PNS ISO 4929:2013 Reconfirmation Preparatory 43.040.40 BPS/TC 44 Road Vehicles

Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks

ISO 374-1:2016 with Amendment 1:2018 New Circulation 01.040.13; 13.340.40

BPS/TC 56 Personal safety - Personal Protective Equipment

2 of 47


STANDARDS(ICS)






6. Approval



Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements for micro-organisms risks

ISO 374-5:2016 New Circulation 01.040.13; 13.340.40


Clothing for protection against heat and flame – General recommendations for selection, care and use of protective clothing

ISO/TR 2801:2007 New Circulation 13.340.10 BPS/TC 56 Personal safety - Personal Protective Equipment

Protective clothing against heat and flame – Determination of heat transmission on exposure to flame

PNS ISO 9151:2015 (ISO Published 1995) New Circulation 13.340.10 BPS/TC 56 Personal safety - Personal Protective

Equipment

Protective clothing – Vocabulary ISO/TR 11610:2004 New Circulation 01.040.13 ; 13.340.10


Clothing for protection against heat and flame – Determination of contact heat transmission through protective clothing or constituent materials – Part 1: Contact heat produced by heating cylinder

PNS ISO 12127-1:2015 (ISO Published 2007) Revision Circulation 13.340.10 BPS/TC 56 Personal safety - Personal Protective

Equipment

Protective clothing against heat and flame – Part 1: Test method for complete garments – Measurement of transferred energy using an instrumented manikin

PNS ISO 13506:2015 (ISO Published 2008) Revision Circulation 13.340.10 BPS/TC 56 Personal safety - Personal Protective

Equipment

Protective clothing against heat and flame – Part 2: Skin burn injury prediction – Calculation requirements and test cases

PNS ISO 13506:2015 (ISO Published 2008) New Circulation 13.340.10 BPS/TC 56 Personal safety - Personal Protective

EquipmentProtective clothing – Protection against flame – Method of test for limited flame spread

PNS ISO 15025:2015 (ISO Published 2000) Revision Deliberation 13.340.10 BPS/TC 56 Personal safety - Personal Protective

EquipmentProtective clothing – Test methods for clothing providing protection against chemicals – Part 4: Determination of resistance to penetration by a spray of liquid (spray test)

PNS ISO 17491-4:2015 (ISO Published 2008) Revision (Amendment) Circulation 13.340.10 BPS/TC 56 Personal safety - Personal Protective

Equipment

Clothing and equipment for protection against heat – Test method for convective heat resistance using a hot air circulating oven

PNS ISO 17493:2015 (ISO Published 2000) revision Circulation 13.340.10 BPS/TC 56 Personal safety - Personal Protective

Equipment

Protective clothing – Protection against chemicals – Measurement of cumulative permeation of chemicals with low vapour pressure through materials

ISO 19918:2017 New Circulation 13.340.10 BPS/TC 56 Personal safety - Personal Protective Equipment

High visibility clothing – Test methods and requirements PNS ISO 20471:2015 (ISO Published 2013) Revision (Amendment) Circulation 13.340.10 BPS/TC 56 Personal safety - Personal Protective

EquipmentProtective clothing for users of hand-held chain-saws – Part 1: Test rig driven by a flywheel for testing resistance to cutting by a chain-saw

PNS ISO 11393-1:2015 (ISO Published 1998) Revision Preparatory 13.340.10 BPS/TC 56 Personal safety - Personal Protective

Equipment

Protective clothing for users of hand-held chain-saws – Part 2: Test methods and performance requirements for leg protectors


Equipment

Protective clothing for users of hand-held chain-saws – Part 3: Test methods for footwear


EquipmentProtective clothing for users of hand-held chain-saws – Part 4: Test methods and performance requirements for protective gloves


Equipment

Protective clothing for users of hand-held chain-saws – Part 5: Test methods and performance requirements for protective gaiters


Equipment

3 of 47


STANDARDS(ICS)






6. Approval



Protective clothing for users of hand-held chain-saws – Part 6: Test methods and performance requirements for upper body protectors


Equipment

Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment – Test method to determine the resistance to wet bacterial penetration

PNS ISO 22610:2015 (ISO Published 2006) Revision Preparatory 13.340.10 BPS/TC 56 Personal safety - Personal Protective

Equipment

Protective gloves against mechanical risks ISO 23388:2018 New Preparatory 13.340.40 BPS/TC 56 Personal safety - Personal Protective Equipment

Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers


Equipment

Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting – Laboratory test methods and performance


Equipment

Protective clothing for firefighters – Laboratory test methods and performance requirements for wildland firefighting clothing


Equipment

PPE ensembles for firefighters undertaking specific rescue activities – Part 1: General ISO 18639-1:2018 New Preparatory 13.340.50 BPS/TC 56 Personal safety - Personal Protective

EquipmentPPE ensembles for firefighters undertaking specific rescue activities – Part 3: Clothing ISO 18639-3:2018 New Preparatory 13.340.10 BPS/TC 56 Personal safety - Personal Protective

EquipmentPPE ensembles for firefighters undertaking specific rescue activities – Part 3: Gloves ISO 18639-4:2018 New Preparatory 13.340.40 BPS/TC 56 Personal safety - Personal Protective

EquipmentPPE ensembles for firefighters undertaking specific rescue activities – Part 3: Helmet ISO 18639-5:2018 New Preparatory 13.340.20 BPS/TC 56 Personal safety - Personal Protective

EquipmentPPE ensembles for firefighters undertaking specific rescue activities – Part 6: Footwea ISO 18639-6:2018 New Preparatory 13.340.50 BPS/TC 56 Personal safety - Personal Protective

EquipmentProtective clothing for firefighters – Physiological impact – Part 1: Measurement of coupled heat and moisture transfer with the sweating torso

ISO 18640-1:2018 New Preparatory 13.340.10 BPS/TC 56 Personal safety - Personal Protective Equipment

Protective clothing for firefighters – Physiological impact – Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters

ISO 18640-2:2018 New Preparatory 13.340.10 BPS/TC 56 Personal safety - Personal Protective Equipment

Personal protective equipment for firefighters – Standard terms and definitions ISO/TR 19591:2018 New Preparatory 01.040.13;

13.340.10BPS/TC 56 Personal safety - Personal Protective

EquipmentRespiratory protective devices – Methods of test and test equipment – Part 2: Determination of breathing resistance

PNS ISO 16900-2:2011(ISO published 2009) Revision Preparatory 13.340.30 BPS/TC 56 Personal safety - Personal Protective

EquipmentRespiratory protective devices – Human factors – Part 1: Metabolic rates and respiratory flow rates

PNS ISO/TS 16976-1:2011(ISO published 2007) Revision Preparatory 13.340.30 BPS/TC 56 Personal safety - Personal Protective

EquipmentRespiratory protective devices – Human factors – Part 2: Anthropometrics


EquipmentRespiratory protective devices – Human factors – Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment


Equipment

4 of 47


STANDARDS(ICS)






6. Approval



Bamboo structures – Grading of bamboo culms – Basic principles and procedures ISO 19624:2018 New Preparatory 91.080.20 BPS/TC 76 Bamboo and Rattan

Rattan poles and rattan by-products - Specification PNS 229:1999 Revision Preparatory 79.040 BPS/TC 76 Bamboo and RattanDimensions and tolerances of sawn timber (lumber) PNS 173:1992 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber ProductsSawn Timber - Determination of the Average Moisture Content of a Lot PNS 1007:1989 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products

Standard Specification for Adhesives for Field Gluing Plywood to Lumber Framing for Floor Systems PNS ASTM D3498:2008 Revision Preparatory 75.080 BPS/TC 22 Lumber and Timber Products

Standard Test Method for Resistance to Deformation Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior (Wet Use) Exposure Conditions

PNS ASTM D3535:2008 Revision Preparatory 83.180 BPS/TC 22 Lumber and Timber Products

Coniferous sawn timber – Defects – Terms and definitions PNS ISO 1031:2010 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber ProductsConiferous sawlogs – Measurement of sizes and determination of volume (ISO 4480:1983) PNS 1899:1999 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products

Coniferous and broadleaved tree sawlogs – Visible defects – Terms and definitions PNS ISO 4474:2010 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products

Coniferous broadleaved sawlogs – Sizes – Vocabulary PNS ISO 4476:2010 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber ProductsStructural timber - Visual strength grading – Basic principles PNS ISO 9709:2009 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber ProductsStructural timber - Machine strength grading -Basic principles PNS ISO 13912:2009 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber ProductsTimber structures - Joints made with mechanical fasteners -- General principles for the determination of strength and deformation characteristics

PNS ISO 6891:2009 Reissue Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

Timber structures -- Glued laminated timber -- Test methods for determination of physical and mechanical properties ISO 8375:2017 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

Logging Industry - Technology - Term and Definitions ISO 8965:2013 New Preparatory 79.02001.040.79 BPS/TC 22 Lumber and Timber Products

Timber structures -- Testing of punched metal plate fasteners and joints ISO 8969:2011 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

Timber structures -- Testing of joints made with mechanical fasteners -- Requirements for wood density ISO 8970:2010 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

Wood - Determination of nail and screw holding power under axial load application ISO 9087:1998 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

Timber -- Finger joints -- Minimum production requirements and testing methods ISO 10983:2014 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

Timber structures -- Dowel-type fasteners -- Part 1: Determination of yield moment ISO 10984-1:2009 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

Timber structures -- Dowel-type fasteners -- Part 2: Determination of embedding strength ISO 10984-2:2009 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

Timber structures -- Strength graded timber -- Test methods for structural properties ISO 13910:2014 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

Timber poles -- Basic requirements and test methods ISO 15206:2010 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber ProductsTimber structures -- Structural classification for sawn timber ISO 16598:2015 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber ProductsTimber structures -- Joints made with mechanical fasteners -- Quasi-static reversed-cyclic test method ISO 16670:2003 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

Timber structures -- Test methods -- Torsional resistance of driving in screws ISO 17754:2014 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products

5 of 47


STANDARDS(ICS)






6. Approval



Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens ASTM C39 / C39M - 18 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Organic Impurities in Fine Aggregates for Concrete PNS ASTM C40/C40M:2013 Revision Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed Concrete

Standard Practice for Sampling Aggregates PNS ASTM D75:2013 Revision Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete

Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric) PNS 58:1986 Revision Preparatory 91.100.30

23.040.50BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) ASTM C78 / C78M - 18 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Sieve Analysis of Fine and Coarse Aggregates PNS ASTM C136:2013 Revision Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method ASTM C173 / C173M - 16 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores ASTM C174 / C174M - 17 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method ASTM C231 / C231M - 17a New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Descriptive Nomenclature for Constituents of Concrete Aggregates PNS ASTM C294:2013 Revision Preparatory 01.040.91

91.100,10BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Guide for Petrographic Examination of Aggregates for Concrete PNS ASTM C295:2013 Revision Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance ASTM C403 / C403M - 16 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

PNS ASTM C441:2013 Revision Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete

Test Method for Particle-Size Analysis of Soils PNS ASTM D422:2013 Revision Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete

Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens ASTM C496 / C496M - 17 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and


Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (RockCylinder Method) PNS ASTM C586:2013 Revision Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and


Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing PNS ASTM C666/C666M:2013 Revision Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Specification for Chemical Admixtures for Use in Producing Flowing Concrete ASTM C1017 / C1017M - 13e1 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete ASTM C1064 / C1064M - 17 New Preparatory 91.100.10 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

ASTM C1077 - 17 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete

Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction PNS ASTM C1105:2013 Revision Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and


6 of 47


STANDARDS(ICS)






6. Approval



Standard Specification for Fiber-Reinforced Concrete ASTM C1116 / C1116M - 10a(2015) New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete

Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) PNS ASTM C1260:2013 Revision Preparatory 91.100.10 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction PNS ASTM C1293:2013 Revision Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Test Method for Obtaining and Testing Drilled Cores of Shotcrete ASTM C1604 / C1604M - 05(2012) New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry ASTM C1660 - 10(2018) New Preparatory 91.100.10 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units ASTM C1691 -11(2017) New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry ASTM C1692 - 18 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and


Standard Specification for Autoclaved Aerated Concrete (AAC) ASTM C1693 - 11(2017) New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete

Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements ASTM C1694 - 09(2017) New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and

Prestressed ConcreteStandard Practice for Random Sampling of Construction Materials PNS ASTM D3665:2013 Revision Preparatory 91.100.01 BPS/TC 5 Concrete, Reinforced Concrete and


Standard Guide for the Use of Foundry Sand in Asphalt Mixtures ASTM D8140 - 18 New Preparatory 91.100.5093.080.20

BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete

Electric vehicle conductive charging system - Part 1: General requirements PNS IEC 61851-1:2012 Revision Preparatory 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road

VehiclesIn-Cable Control and Protection Device for mode 2 charging of electric road vehicles (IC-CPD) IEC 62752:2016 New Preparatory 29.120.50 BPS/TC 44 Road Vehicles/SC21 Electric Road

VehiclesHybrid-electric road vehicles -- Exhaust emissions and fuel consumption measurements -- Part 1: Non-externally chargeable vehicles

ISO 23274-1:2013 New Preparatory 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles

Hybrid-electric road vehicles -- Exhaust emissions and fuel consumption measurements -- Part 2: Externally chargeable vehicles

ISO 23274-2:2012 New Preparatory 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles

Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements IEC 61980-1:2015/COR1:2017 New Preparatory 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road

VehiclesElectrically propelled road vehicles -- Magnetic field wireless power transfer -- Safety and interoperability requirements ISO/PAS 19363:2017 New Preparatory 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road

VehiclesElectric vehicle battery swap system - Part 1: General and guidance IEC TS 62840-1:2016 New Preparatory 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road

VehiclesElectric vehicle battery swap system - Part 2: Safety requirements IEC 62840-2:2016 New Preparatory 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road

VehiclesElectric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply

PNS IEC 61851-21:2012 Revision Preparatory 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles

Electric road vehicles - Safety specifications - Part 3: Protection of persons against electric hazards PNS ISO 6469-3:2012 Revision Preparatory 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road

VehiclesTest methods for natural fibre-reinforced plastic composite (NFC) deck boards ISO 16616:2015 New Circulation 83.140.99 BPS/TC 35 Wood-based panels

7 of 47


STANDARDS(ICS)






6. Approval



Veneers - Terms and definitions, determination of physical characteristics and tolerances ISO 18775:2008 New Circulation 01.040.79; 79.060.01 BPS/TC 35 Wood-based panels

Plywood - Classification by surface appearance - Part 4: Palm-plywood ISO 2426-4:2018 New Preparatory 79.060.01 BPS/TC 35 Wood-based panels

Steel bars for concrete reinforcement - Specification DPNS 49:2019 Revision Finalization 77.140.15; 77.140.60 BPS/TC 11 Long Steel ProductsSpecification for Carbon Steel Wire Rods PNS 77:1986 Revision Preparatory 669.141 BPS/TC 11 Long Steel ProductsRerolled steel bars for concrete reinforcement - Specification PNS 211:2002 Revision Preparatory 77.140.15 BPS/TC 11 Long Steel ProductsHot-rolled steel section - Equal-leg angles - Specifications PNS 657:2008 Revision Preparatory 669.14; 122.4; 423.2 BPS/TC 11 Long Steel Products

Specification for low carbon steel wires - Plain/annealed/zinc-coated PNS 113:2005 Revision Preparatory 77.140.65 BPS/TC 11 Long Steel Products

Societal security - Business continuity management systems - Guidance ISO 22312:2011 New Preparatory 03.100.01 BPS/TC 75 Societal Security

Sustainability in building construction - General principles ISO 15392:2008 Reconfirmation Preparatory 91.040.01 (ISO/TC 59 Sustainability in Buildings and Civil

Engineering Works)Sustainability in buildings and civil engineering works - Guidelines on the application of the general principles in ISO 15392 ISO/TS 12720:2014 New Preparatory 91.040.01

(ISO/TC 59 Sustainability in Buildings and Civil Engineering Works)

Sustainability in buildings and civil engineering works - Carbon metric of an existing building during use stage - Part 1: Calculation, reporting and communication

ISO 16745-1:2017 New Preparatory 91.040.01 (ISO/TC 59 Sustainability in Buildings and Civil

Engineering Works)

Sustainability in buildings and civil engineering works - Carbon metric of an existing building during use stage - Part 2: Verification ISO 16745-2:2017 New Preparatory 91.040.01


Sustainability in building construction - Sustainability indicators - Part 1: Framework for the development of indicators and a core set of indicators for buildings

ISO 21929-1:2011 Revision Preparatory 91.040.01 (ISO/TC 59 Sustainability in Buildings and Civil

Engineering Works)

Sustainability in building construction - Sustainability indicators - Part 2: Framework for the development of indicators for civil engineering works ISO 21929-2:2015 New Preparatory 91.040.01


Sustainability in buildings and civil engineering works - Core rules for environmental product declarations of construction products and services

ISO 21930:2017 Revision Preparatory 91.040.01 (ISO/TC 59 Sustainability in Buildings and Civil

Engineering Works)

Sustainability in buildings and civil engineering works - A review of terminology ISO/TR 21932:2013 New Preparatory 01.040.91; 91.040.01


Building construction - Accessibility and usability of the built environment ISO 21542:2011 New Preparatory 91.060.01 (ISO/TC 59 Sustainability in Buildings and Civil

Engineering Works)Buildings and civil engineering works - Vocabulary - Part 1: General terms ISO 6707-1:2017 Revision Preparatory 01.040.93; 93.010; 01.040.91;

01.010.01 (ISO/TC 59 Sustainability in Buildings and Civil

Engineering Works)Buildings and civil engineering works - Vocabulary - Part 2: Contract and communication terms ISO 6707-2:2017 Revision Preparatory 91.010.20; 01.040.91


Buildings and civil engineering works - Vocabulary - Part 3: Sustainability terms ISO 6707-3:2017 New Preparatory 01.040.91; 91.010.20


Buildings and constructed assets -- Service life planning -- Part 1: General principles and framework ISO 15686-1:2011 Revision Preparatory 91.040.01


Buildings and constructed assets -- Service life planning -- Part 2: Service life prediction procedures ISO 15686-2:2012 Revision Preparatory 91.040.01


Buildings and constructed assets -- Service life planning -- Part 3: Performance audits and reviews ISO 15686-3:2002 Reconfirmation Preparatory 91.040.01


8 of 47


STANDARDS(ICS)






6. Approval



Building Construction -- Service Life Planning -- Part 4: Service Life Planning using Building Information Modelling ISO 15686-4:2014 Revision Preparatory 91.040.01


Buildings and constructed assets -- Service life planning -- Part 5: Life-cycle costing ISO 15686-5:2017 Revision Preparatory 91.040.01


Buildings and constructed assets -- Service life planning -- Part 6: Procedures for considering environmental impacts ISO 15686-6:2004 Revision Preparatory 91.040.01


Buildings and constructed assets -- Service-life planning -- Part 8: Reference service life and service-life estimation ISO 15686-8:2008 New Preparatory 91.040.01


Buildings and constructed assets -- Service-life planning -- Part 9: Guidance on assessment of service-life data ISO 15686-9:2008 New Preparatory 91.040.01


Buildings and constructed assets -- Service life planning -- Part 10: When to assess functional performance ISO 15686-10:2010 New Preparatory 91.040.01


Buildings and constructed assets -- Service life planning -- Part 11: Terminology ISO 15686-11:2014 New Preparatory 91.040.01


Performance standards in building -- Definition and calculation of area and space indicators ISO 9836:2017 Revision Preparatory 91.040.01


Building Environment design - Indoor environment -- General principles ISO 16813:2006 Reconfirmation Preparatory 91.040.01 (ISO/TC 205 Bulding Environment Design)Building environment design -- Indoor air quality -- Methods of expressing the quality of indoor air for human occupancy ISO 16814:2008 Reconfirmation Preparatory 91.040.01; 13.040.20 (ISO/TC 205 Bulding Environment Design)

Building environment design -- Energy efficiency -- Terminology ISO 16818:2008 Reconfirmation Preparatory 01.040.91; 91.040.01 (ISO/TC 205 Bulding Environment Design)Building environment design -- Guidelines to assess energy efficiency of new buildings ISO 23045:2008 Reconfirmation Preparatory 91.040.01 (ISO/TC 205 Bulding Environment Design)

Facility smart grid information model ISO 17800:2017 New Preparatory 91.040.01 (ISO/TC 205 Bulding Environment Design)Technical drawings - General principles of presentation - Part 23: Lines on construction drawings ISO 128-23:1999 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Technical product documentation (TPD) General principles of presentation - Part 33: Representation of views, sections and cuts in construction drawings

ISO 128-33:2018 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Technical product documentation (TPD) General principles of presentation - Part 43: Projection methods in building drawings ISO 128-43:2015 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Construction drawings - Simplified representation of concrete reinforcement ISO 3766:2003 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Construction drawings - Designation systems - Part 1: Buildings and parts of buildings ISO 4157-1:1998 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Construction drawings - Designation systems - Part 2: Room names and numbers ISO 4157-2:1998 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Construction drawings - Designation systems - Part 3: Room identifiers ISO 4157-3:1998 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Technical drawings -- Construction drawings -- Drawings for the assembly of prefabricated structures ISO 4172:1991 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Construction drawings -- Indication of limit deviations ISO 6284:1996 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)Technical drawings -- Construction drawings -- General rules for execution of production drawings for prefabricated structural components

ISO 7437:1990 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Technical drawings -- Construction drawings -- Simplified representation of demolition and rebuilding ISO 7518:1983 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

9 of 47


STANDARDS(ICS)






6. Approval



Technical drawings -- Construction drawings -- General principles of presentation for general arrangement and assembly drawings ISO 7519:1991 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Technical drawings -- Construction drawings -- Representation of modular sizes, lines and grids ISO 8560:1986 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Construction drawings -- Spaces for drawing and for text, and title blocks on drawing sheets ISO 9431:1990 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Construction drawings -- Landscape drawing practice ISO 11091:1994 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)Technical product documentation -- Organization and naming of layers for CAD -- Part 1: Overview and principles ISO 13567-1:2017 Revision Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Technical product documentation -- Organization and naming of layers for CAD -- Part 2: Concepts, format and codes used in construction documentation

ISO 13567-2:2017 Revision Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Symbol libraries for construction and facilities management ISO/TR 16310:2014 New Preparatory 01.100.30 ( ISO/TC 10 SC 08 Construction Documentation)

Portable fire extinguishers — Fire rating, classification, performance, construction, installation and maintenance ISO 7165, NFPA 10, UL 711 New Drafting/Deliberation 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

EquipmentFire fighting — Wheeled fire extinguishers — Performance and construction ISO 11601:2017 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

EquipmentGaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements ISO 14520-1:2015 New Drafting/Deliberation 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

EquipmentGaseous fire-extinguishing systems — Physical properties and system design — Part 2: CF3I extinguishant ISO 14520-2:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

EquipmentGaseous fire-extinguishing systems — Physical properties and system design - Part 5: FK-5-1-12 extinguishant ISO 14520-5:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

EquipmentGaseous fire-extinguishing systems — Physical properties and system design - Part 6: HCFC Blend A extinguishant ISO 14520-6:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

EquipmentGaseous fire-extinguishing systems — Physical properties and system design - Part 8: HFC 125 extinguishant ISO 14520-8:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

EquipmentGaseous fire-extinguishing systems — Physical properties and system design - Part 9: HFC 227ea extinguishant ISO 14520-9:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

EquipmentGaseous fire-extinguishing systems — Physical properties and system design - Part 10: HFC 23 extinguishant ISO 14520-10:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

EquipmentGaseous fire-extinguishing systems — Physical properties and system design - Part 11: HFC 236fa extinguishant ISO 14520-11:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

EquipmentGaseous fire-extinguishing systems — Physical properties and system design - Part 12: IG-01 extinguishant ISO 14520-12:2015 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting

Equipment"Gaseous fire-extinguishing systems — Physical properties and system design - Part 13: IG-100 extinguishant" ISO 14520-13:2015 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting



Equipment

Fire extinguisher ball - Design, construction, and performance DPNS XXXX:20XX New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment

Blended Hydraulic Cements -- Specification PNS 63:2006 PNS 69:2005 Revision Circulation 91.100.10 BPS/TC 3 Cement and LimeStandard Specification for Masonry Cement PNS ASTM C91/C91M:2013 Revision Preparatory 91.100.10 BPS/TC 3 Cement and Lime

CHEMICAL PRODUCTS

10 of 47


STANDARDS(ICS)






6. Approval



Standard Specification for Slag Cement for Use in Concrete and Mortars ASTM C989/C989M-18 New Preparatory 91.100.30 BPS/TC 3 Cement and Lime

Specification -- White portland cement PNS 53:2005 Revision Preparatory 91.100.10 BPS/TC 3 Cement and LimeStandard Specification for Moist Cabinets, Moist Rooms and Water Storage Tanks Used in Testing of Hydraulic Cements and Concretes

PNS ASTM C511:2005 Revision Preparatory 91.100.10 BPS/TC 3 Cement and Lime

Standard Specification for Plastic (Stucco) Cement ASTM C1328/C1328M-12 New Preparatory 91.100.10 BPS/TC 3 Cement and LimeStandard Specification for Natural Cement ASTM C10/C10M-14 New Preparatory 91.100.10 BPS/TC 3 Cement and LimeStandard Specification for Mortar Cement ASTM C1329/C1329M-16a New Preparatory 91.100.10 BPS/TC 3 Cement and Lime

Standard Specification for Rapid Hardening Hydraulic Cement ASTM C1600/C1600M-17 New Preparatory 91.100.10 BPS/TC 3 Cement and Lime

Standard Specification for Expansive Hydraulic Cement ASTM C845/C845M-18 New Preparatory 91.100.10 BPS/TC 3 Cement and LimeTransportable and refillable steel cylinders for liquefied petroleum gas (LPG) – Part 3: Requirements for repair PNS 03-3:2014 Revision for Circulation 23.020.30 BPS/TC 06 Gas Cylinders

Gas cylinders — Composite construction — Periodic inspection and testing ISO 11623:2015 New Drafting/Deliberation 23.020.35 BPS/TC 06 Gas Cylinders

Requirements for repair for refillable composite gas cylinders and tubes DPNS XXXX:20XX New Preparatory 23.020.30 BPS/TC 06 Gas Cylinders

Gas cylinders - Refillable seamless steel gas cylinders (low volume canisters)- Design, construction and testing

ISO 9809-1:2010, ISO 9809-2:2010, and ISO 9809-3:2010 New Preparatory 23.020.30 BPS/TC 06 Gas Cylinders

Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners

ISO 11119-2:2012 Revision Preparatory 23.020.30 BPS/TC 06 Gas Cylinders

Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450l with non-load-sharing metallic or non-metallic liners

ISO 11119-3:2013 Revision Preparatory 23.020.30 BPS/TC 06 Gas Cylinders

Gas cylinders — Refillable composite gas cylinders — Design, construction and testing —Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners

ISO 11119-4:2016 New Preparatory 23.020.30 BPS/TC 06 Gas Cylinders

Unplasticized polyvinyl chloride (uPVC) electrical conduit – Specification PNS 14:2005 Revision Drafting/Deliberation 23.040.20 BPS/TC 24 Plastic Pipes and Fittings

Plastics piping systems for hot and cold water installations – Polypropylene (PP) ISO 15874:2013 (Parts 1, 2, 3, and 5) New Drafting/Deliberation 23.040.20; 91.140.60 BPS/TC 24 Plastic Pipes and Fittings

Polyethylene (PE) pipes for water supply – Specification PNS ISO 4427:2002 Revision Drafting/Deliberation 23.040.20 BPS/TC 24 Plastic Pipes and Fittings

Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinyl chloride) (PVC-U) ISO 4435:2003 New Preparatory 23.040.20; 93.030 BPS/TC 24 Plastic Pipes and Fittings

Paints and varnishes - Terms and definitions ISO 4618:2014 Revision Preparatory 01.040.87;87.040 BPS/TC 25 Paints and VarnishesMarine anti-fouling paint – Specification DPNS 2132 New Drafting/Deliberation 87.04 BPS/TC 25 Paints and VarnishesMarine topcoat – Specification DPNS 2140 New Drafting/Deliberation 87.04 BPS/TC 25 Paints and VarnishesStandard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications PNS ASTM C1249:2013 Revision Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

11 of 47


STANDARDS(ICS)






6. Approval



Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications PNS ASTM C1265:2013 Revision Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Standard Practice for Determining Load Resistance of Glass in Buildings PNS ASTM E1300:2013 Revision Preparatory 81.040.30 BPS/TC 28 Glass and Glass Products

Standard Test Method for Insulating Glass Unit Performance PNS ASTM E2188:2013 Reconfirmation Preparatory 81.040.01 BPS/TC 28 Glass and Glass ProductsStandard Test Method for Testing Resistance to Fogging in Insulating Glass Units PNS ASTM E2189:2013 Reconfirmation Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Standard Specification for Insulating Glass Units Performance and Evaluation PNS 2100:2013 Reconfirmation Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography PNS ASTM E2269:2012 Revision Preparatory "71.040.50; 81.040.01" BPS/TC 28 Glass and Glass Products

Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units ASTM E546 - 14 New Preparatory 91.060.50 BPS/TC 28 Glass and Glass Products

Glass in buildings - Insulating glass -- Part 1: Durability of edge seals by climate tests ISO 20492-1:2008 New Deliberation 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in buildings - Insulating glass -- Part 2: Chemical fogging tests ISO 20492-2:2008 New Deliberation 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in buildings -- Insulating glass -- Part 3: Gas concentration and gas leakage ISO 20492-3:2010 New Deliberation 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in buildings -- Insulating glass -- Part 4: Methods of test for the physical attributes of edge seals ISO 20492-4:2010 New Deliberation 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Vacuum insulating glass -- Part 1: Basic specification of products and evaluation methods for thermal and sound insulating performance

ISO 19916-1:2018 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Uniform provisions concerning the approval of safety glazing materials and their installation on vehicles PNS UN ECE 43:2009 Revision Preparatory BPS/TC 28 Glass and Glass Products

Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass ASTM C1376 - 15 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building – Coated glass – Part 1: Physical defects PNS ISO 11479-1:2012 Reconfirmation Preparatory 81.040.20 BPS/TC 28 Glass and Glass ProductsGlass in building – Coated glass – Part 2: Colour of façade PNS ISO 11479-2:2012 Reconfirmation Preparatory 81.040.20 BPS/TC 28 Glass and Glass ProductsStandard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades ASTM E2353 - 16 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades ASTM E2358 - 15 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Destructive-windstorm-resistant security glazing -- Test and classification ISO 16932:2016 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Explosion-resistant security glazing -- Test and classification for arena air-blast loading ISO 16933:2007 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Explosion-resistant security glazing -- Test and classification by shock-tube loading ISO 16934:2007 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Bullet-resistant security glazing -- Test and classification ISO 16935:2007 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Forced-entry security glazing -- Part 1: Test and classification by repetitive ball drop ISO 16936-1:2005 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

12 of 47


STANDARDS(ICS)






6. Approval



Glass in building -- Forced-entry security glazing -- Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature


Glass in building -- Forced-entry security glazing -- Part 3: Test and classification by manual attack ISO 16936-3:2005 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Forced-entry security glazing -- Part 4: Test and classification by pendulum impact under thermally and fire stressed conditions


Glass in building -- Glass products for structural sealant glazing -- Part 1: Supported and unsupported monolithic and multiple glazing


Glass in building -- Glass products for structural sealant glazing -- Part 2: Assembly rules ISO 28278-2:2010 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Laminated solar photovoltaic glass for use in buildings ISO/TS 18178:2018 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Electrochromic glazings -- Accelerated ageing test and requirements ISO 18543:2017 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Silvered, flat-glass mirror ISO 25537:2008 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass ProductsGlass in building -- Determination of the bending strength of glass -- Part 1: Fundamentals of testing glass ISO 1288-1:2016 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Determination of the bending strength of glass -- Part 2: Coaxial double-ring test on flat specimens with large test surface areas


Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four point bending)


Glass in building -- Determination of the bending strength of glass -- Part 4: Testing of channel shaped glass ISO 1288-4:2016 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Determination of the bending strength of glass -- Part 5: Coaxial double ring test on flat specimens with small test surface areas


Glass in building -- Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors

ISO 9050:2003 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Determination of steady-state U values (thermal transmittance) of multiple glazing -- Guarded hot plate method


Glass in building -- Calculation of steady-state U values (thermal transmittance) of multiple glazing ISO 10292:1994 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Determination of steady-state U values (thermal transmittance) of multiple glazing -- Heat flow meter method


Glass in building -- Determination of energy balance value -- Calculation method ISO 14438:2002 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

13 of 47


STANDARDS(ICS)






6. Approval



Glass in building -- Glazing and airborne sound insulation -- Measurement of the mechanical impedance of laminated glass ISO 16940:2008 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Glazing and airborne sound insulation -- Product descriptions and determination of properties ISO 22897:2003 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Pendulum impact testing and classification of safety glass ISO 29584:2015 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Glass in building -- Glass blocks -- Specification and test methods ISO 21690:2006 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products

Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by Horizontal Dynamometer Pull-Meter Method

PNS ASTM C1028:2013 Reconfirmation Preparatory 91.100.25 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles — Part 2: Determination of dimensions and surface quality PNS ISO 10545-2:2013 Revision Preparatory 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles Part 5: Determination of impact resistance by measurement of coefficient of restitution PNS ISO 10545-5:2013 Reconfirmation Preparatory 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles PNS ISO 10545-6:2013 Reconfirmation Preparatory 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles Part 7: Determination of resistance to surface abrasion for glazed tiles PNS ISO 10545-7:2013 Reconfirmation Preparatory 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles Part 9: Determination of resistance to thermal shock PNS ISO 10545-9:2013 Reconfirmation Preparatory 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles Part 11: Determination of crazing resistance for glazed tiles PNS ISO 10545-11:2013 Reconfirmation Preparatory 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles Part 12: Determination of frost resistance PNS ISO 10545-12:2013 Reconfirmation Preparatory 91.100.23 BPS/TC 29 Ceramics and Ceramics ProductsCeramic tiles — Part 16: Determination of small colour differences PNS ISO 10545-16:2013 Reconfirmation Preparatory 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles —Definitions, classification, characteristics and marking PNS ISO 13006:2013 Revision Deliberation 01.040.91; 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles -- Grouts and adhesives -- Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives

ISO 13007-5:2015 New Preparatory 91.100.10; 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles -- Guidelines for installation -- Part 1: Installation of ceramic wall and floor tiles ISO/TR 17870-1:2015 New For circulation 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic tiles -- Guidelines for installation -- Part 2: Installation of thin ceramic wall and floor tiles and panels ISO/TR 17870-2:2015 New For circulation 91.100.23 BPS/TC 29 Ceramics and Ceramics Products

Ceramic Plumbing Fixtures PNS 156:2010 Revision Drafting/Deliberation 81.060.20 BPS/TC 29 Ceramics and Ceramics ProductsStandard Specification for Alumina Ceramics for Electrical and Electronic Applications ASTM D2442-75 (2016) New Preparatory 29.035.30; 81.060.20 BPS/TC 29 Ceramics and Ceramics Products

Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications ASTM D116-86 (2016) New Preparatory 81.040.30; 81.060.01 BPS/TC 29 Ceramics and Ceramics Products

Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique ASTM C690 - 09(2014) New Preparatory 81.060.10 BPS/TC 29 Ceramics and Ceramics Products

14 of 47


STANDARDS(ICS)






6. Approval



Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders ASTM C925 - 09(2014) New Preparatory 81.060.10 BPS/TC 29 Ceramics and Ceramics Products

Doors -- Terminology DPNS 933 Revision Drafting/Deliberation 91.060.50; 01.040.91 BPS/TC 34 Doors and WindowsSteel doors and steel door frames – Glossary DPNS 269 Revision Preparatory 91.060.50 BPS/TC 34 Doors and WindowsCoordinating sizes for doorsets for residential and commercial buildings

DPNS 249:20xx (revision of PNS 249:1989) Revision Preparatory 91.060.50 BPS/TC 34 Doors and Windows

Door leaves -- General and local flatness -- Measurement method ISO 6442:2005 New Preparatory 91.060.50 BPS/TC 34 Doors and Windows

Door leaves -- Method for measurement of height, width, thickness and squareness ISO 6443:2005 Revision Preparatory 91.060.50 BPS/TC 34 Doors and Windows

Test method of doorset opening performance in diagonal deformation -- Seismic aspects ISO 15822:2007 New Preparatory 91.060.50 BPS/TC 34 Doors and Windows

Doorsets – Determination of closing force DPNS ISO 8274 (revision of PNS 658:1990) Revision Preparatory 91.060.50 BPS/TC 34 Doors and Windows

Fireworks -- Part 1: Classification PNS 1220-1:1994 Revision Drafting/Deliberation 01.040.71; 71.100.30 BPS/TC 50 FireworksFireworks -- Part 2: Specification PNS 1220-2:1994 Revision Drafting/Deliberation 71.100.30 BPS/TC 50 FireworksFireworks -- Part 3: Test Methods DPNS 1220-3 New Preparatory 71.100.30 BPS/TC 50 FireworksStandard Practice for Applied Weight Per Unit Area of Liquid Adhesive ASTM D899-00(2013) New For circulation 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use ASTM D1101-97a(2018) New For circulation 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Specification for Liquid Optical Adhesive PNS ASTM D2851:2005 Revision Preparatory 83.180 BPS/TC 51 Adhesives and Allied ProductsStandard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives PNS ASTM 6004:2013 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress ASTM D2860/D2860M-04(2010) New Preparatory 55.04 BPS/TC 51 Adhesives and Allied Products

Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature ASTM D3889/D3889M-96(2012) New Preparatory 55.04 BPS/TC 51 Adhesives and Allied Products

Standard Specification for Friction Tape ASTM D4514-12 New Preparatory 29.035.20 BPS/TC 51 Adhesives and Allied ProductsStandard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing1, 2 ASTM D5486/D5486M-06(2012) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking ASTM D6123/D6123M-97(2012) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans1, 2 ASTM D6590/D6590M-00(2012) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives ASTM D1780-05(2012) New For circulation 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Test Method for Climbing Drum Peel for Adhesives ASTM D1781-98(2012) New For circulation 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Test Method for Impact Strength of Adhesive Bonds ASTM D950-03(2011) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds ASTM D1062-08(2015) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation ASTM D1879-06(2014) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens ASTM D2095-96(2015) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

15 of 47


STANDARDS(ICS)






6. Approval



Adhesives -- Determination of peel resistance of high-strength adhesive bonds -- Floating-roller method PNS ISO 4578:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by tensile loading PNS ISO 6237:2014 Revision Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by compressive loading PNS ISO 6238:2014 Revision Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives with solvents for assembly of PVC-U pipe elements -- Characterization -- Part 1: Basic test methods PNS ISO 7387-1:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives for thermoplastic piping systems -- Part 1: Determination of film properties PNS ISO 9311-1:2008 Reconfirmation Preparatory 83.180; 23.040.01 BPS/TC 51 Adhesives and Allied Products

Adhesives for thermoplastic piping systems -- Part 2: Determination of shear strength PNS ISO 9311-2:2008 Revision Preparatory 83.180; 23.040.01 BPS/TC 51 Adhesives and Allied Products

Adhesives for thermoplastic piping systems -- Part 3: Test method for the determination of resistance to internal pressure PNS ISO 9311-3:2012 Reconfirmation Preparatory 83.180; 23.040.01 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Test method for shear impact strength of adhesive bonds PNS ISO 9653:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Test methods for fatigue properties of structural adhesives in tensile shear PNS ISO 9664:2008 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Animal glues -- Methods of sampling and testing PNS ISO 9665:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Characterization of durability of structural-adhesive-bonded assemblies -- Wedge rupture test PNS ISO 10354:2008 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Designation of main failure patterns PNS ISO 10365:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied ProductsAdhesives -- Determination of shear behaviour of structural adhesives -- Part 1: Torsion test method using butt-bonded hollow cylinders

PNS ISO 11003-1:2004 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Determination of shear behaviour of structural adhesives -- Part 2: Tensile test method using thick adherends PNS ISO 11003-2:2004 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions -- Wedge impact method

PNS ISO 11343:2008 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Ceramic tiles -- Grouts and adhesives -- Part 1: Terms, definitions and specifications for adhesives PNS ISO 13007-1:2014 Reconfirmation Deliberation 83.180; 91.100.23 BPS/TC 51 Adhesives and Allied Products

Ceramic tiles -- Grouts and adhesives -- Part 2: Test methods for adhesives PNS ISO 13007-2:2014 Reconfirmation Deliberation 83.180; 91.100.23 BPS/TC 51 Adhesives and Allied Products

Ceramic tiles -- Grouts and adhesives -- Part 3: Terms, definitions and specifications for grouts PNS ISO 13007-3:2014 Reconfirmation Deliberation 91.100.10; 91.100.23 BPS/TC 51 Adhesives and Allied Products

Ceramic tiles -- Grouts and adhesives -- Part 4: Test methods for grouts PNS ISO 13007-4:2014 Reconfirmation For circulation 91.100.10; 91.100.23 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method PNS ISO 13445:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Evaluation of the effectiveness of surface treatment techniques for aluminium -- Wet-peel test by floating-roller method


16 of 47


STANDARDS(ICS)






6. Approval



Adhesives -- Determination of resistance to flow (sagging) PNS ISO 14678:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied ProductsAdhesives -- Measurement of adhesion characteristics by a three-point bending method PNS ISO 14679:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Determination of cleavage strength of bonded joints PNS ISO 15107:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Determination of strength of bonded joints using a bending-shear method PNS ISO 15108:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Methods of preparing bulk specimens -- Part 1: Two-part systems PNS ISO 15166-1:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Methods of preparing bulk specimens -- Part 2: Elevated-temperature-curing one-part systems PNS ISO 15166-2:2008 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives for thermoplastic piping systems -- Test method for the determination of thermal stability of adhesives PNS ISO 15908:2008 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 1: General test methods PNS ISO 16525-1:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 2: Determination of electrical characteristics for use in electronic assemblies


Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 3: Determination of heat-transfer properties PNS ISO 16525-3:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies


Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 5: Determination of shear fatigue PNS ISO 16525-5:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 6: Determination of pendulum-type shear impact


Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 7: Environmental test methods PNS ISO 16525-7:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 8: Electrochemical-migration test methods PNS ISO 16525-8:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 9: Determination of high-speed signal-transmission characteristics


Adhesives -- Adhesives for bonding parquet to subfloor -- Test methods and minimum requirements PNS ISO 17178:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Structural adhesives -- A standard database of properties PNS ISO 17194:2010 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied ProductsAdhesives -- Determination of temperature dependence of shear strength PNS ISO 19212:2008 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

17 of 47


STANDARDS(ICS)






6. Approval



Adhesives -- Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures


Adhesives -- Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives PNS ISO 25179:2014 Revision Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Test methods for the evaluation and selection of adhesives for indoor wood products -- Part 1: Resistance to delamination in non-severe environments


Adhesives -- Test methods for the evaluation and selection of adhesives for indoor wood products -- Part 2: Resistance to delamination in severe environments


Self adhesive tapes -- Determination of peel adhesion properties PNS ISO 29863:2014 Revision Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Self adhesive tapes -- Measurement of static shear adhesion PNS ISO 29864:2014 Revision Preparatory 83.180 BPS/TC 51 Adhesives and Allied ProductsHot-melt adhesives -- Determination of thermal stability ISO 10363:1992 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 1: Guidelines for the approach ISO 19095-1:2015 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 2: Test specimens ISO 19095-2:2015 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 3: Test methods ISO 19095-3:2015 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 4: Environmental conditions for durability

ISO 19095-4:2015 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Adhesives -- Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens

ISO 25217:2009 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

Self adhesive tapes -- Measurement of breaking strength and elongation at break ISO 29864:2018 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products

The Ruby Guide CIBJO New Preparatory 39.060 BPS/TC 54 JewelleryThe Saphire Guide CIBJO New Preparatory 39.060 BPS/TC 54 JewelleryWatch - case and accessories - Gold alloy covering Part I: General Requirements PNS ISO 3160-1:2010 Revision For Circulation 39.040.10 BPS/TC 54 Jewellery

Watch cases and accessories - Gold alloy coverings - Part 2: Determination of fineness, thickness, corrosion, resistance, and adhesion

PNS ISO 3160-2:2010 Revision For Circulation 39.040.10 BPS/TC 54 Jewellery

Watch cases and Accessories - Gold alloy coverings - coating on standard gauges PNS ISO 3160-3:2010 Revision Preparatory 39.040.10 BPS/TC 54 Jewellery

Jewellery -- Gold alloy coatings PNS ISO 10713:2010 Revision Drafting/Deliberation 39.060 BPS/TC 54 JewelleryJewellery – Terms and definition PNS 2053:2013 Revision Preparatory 39.060; 01.040.39 BPS/TC 54 JewelleryPrecious metals – Terminology and Classification PNS 2106:2014 Revision Preparatory 39.060; 01.040.39 BPS/TC 54 JewelleryGrading polished diamonds - Terminology and classification PNS ISO/TR 11211:2008 Revision Preparatory 39.060; 01.040.39 BPS/TC 54 Jewellery

Determination of platinum in platinum jewellery alloys - Gravimetric determination by reduction with mercury(I) chloride PNS ISO 11489:2010 Revision Preparatory 39.060 BPS/TC 54 Jewellery

18 of 47


STANDARDS(ICS)






6. Approval



Plain end steel tubes, welded and seamless – General tables of dimensions and masses per unit length ISO 4200:1991 New for Circulation 23.040.10 BPS/TC 61 Ferrous Pipes and Fittings

Ductile iron pipes, fittings, accessories and their joints for water applications ISO 2531:2009 New Drafting/Deliberation 91.140.60 BPS/TC 61 Ferrous Pipes and Fittings

Hot-rolled carbon steel strip of commercial and drawing qualities ISO 6317:2008 New Drafting/Deliberation 77.140.50 BPS/TC 61 Ferrous Pipes and Fittings

Standard specification for hubless cast iron soil pipe and fittings for sanitary and storm drain, waste, and vent piping applications PNS 1570:1998 Revision Preparatory 23.040.01; 91.140.80 BPS/TC 61 Ferrous Pipes and Fittings

Design method for ductile iron pipes ISO 10803:2011 New Preparatory 23.040.10 BPS/TC 61 Ferrous Pipes and FittingsEarthquake and subsidence-resistant design of ductile iron pipelines ISO 16134:2006 New Preparatory 23.040.10 BPS/TC 61 Ferrous Pipes and Fittings

Footwear -- Critical substances potentially present in footwear and footwear components -- Determination of phenol in footwear materials

ISO 20536:2017 New Preparatory 61.060 BPS/TC 67 Footwear

Footwear – Test methods for slide fasteners – Resistance to damage during closure under a lateral force ISO 18403:2016 New Preparatory 61.060 BPS/TC 67 Footwear

Footwear – Test method for the characterization of elastic materials – Tensile performance ISO 10765:2010 New Preparatory 61.060 BPS/TC 67 Footwear

Footwear test method for the determination of the resistance of elastic materials for footwear to repeated extension – Fatigue resistance

ISO 10768:2010 New Preparatory 61.060 BPS/TC 67 Footwear

Footwear – Resistance to crack initiation and growth – Bel flex method ISO 16177:2012 New Preparatory 61.060 BPS/TC 67 Footwear

Footwear and footwear components – test method to assess antibacterial activity ISO 16187:2013 New Preparatory 61.060 BPS/TC 67 Footwear

Code for Footwear labelling and indication of composition PNS 216:2010 Revision Drafting/Deliberation 61.060 BPS/TC 67 FootwearFootwear – Test methods for heels and top pieces-Top piece retention strength PNS ISO 19958:2011 Revision Preparatory 61.060 BPS/TC 67 Footwear

Footwear - Test methods for heels-Fatigue resistance PNS ISO 19956:2011 Revision Preparatory 61.060 BPS/TC 67 FootwearFootwear - Test methods for outsoles – Abrasion resistance PNS ISO 120871:2011 Revision Preparatory 61.060 BPS/TC 67 FootwearFootwear - Test methods for heals- Heel pin holding strength PNS ISO 19957:2011 Revision Preparatory 61.060 BPS/TC 67 FootwearFootwear - Performance requirements for components for footwear - Insoles PNS ISO/TR 20881:2011 Revision Preparatory 61.060 BPS/TC 67 Footwear

Footwear - Vocabulary PNS ISO 19952:2011 Revision Preparatory 01.040.61; 61.060 BPS/TC 67 FootwearNanotechnologies -- Methodology for the classification and categorization of nanomaterials ISO/TR 11360:2010 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Model taxonomic framework for use in developing vocabularies -- Core concepts ISO/TR 12802:2010 New Preparatory 01.040.07; 07.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Considerations for the development of chemical nomenclature for selected nano-objects ISO/TR 14786:2014 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Framework for identifying vocabulary development for nanotechnology applications in human healthcare

ISO/TR 17302:2015 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Plain language explanation of selected terms from the ISO/IEC 80004 series ISO/TR 18401:2017 New Preparatory 01.040.07; 07.120 BPS/TC 85 Nanotechnologies

19 of 47


STANDARDS(ICS)






6. Approval



Nanotechnologies -- Standard terms and their definition for cellulose nanomaterial ISO/TS 20477:2017 New Preparatory 01.040.07; 07.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Vocabulary -- Part 9: Nano-enabled electrotechnical products and systems IEC/TS 80004-9:2017 New Preparatory 01.040.07; 07.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Vocabulary -- Part 11: Nanolayer, nanocoating, nanofilm, and related terms ISO/TS 80004-11:2017 New Preparatory 01.040.07; 07.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Vocabulary -- Part 13: Graphene and related two-dimensional (2D) materials ISO/TS 80004-13:2017 New Preparatory 01.040.07; 07.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method

ISO 10801:2010 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing ISO 10808:2010 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

"Nanotechnologies -- Health and safety practices in occupational settings " ISO/TR 12885:2018 New Preparatory 13.100; 07.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Occupational risk management applied to engineered nanomaterials -- Part 1: Principles and approaches ISO/TS 12901-1:2012 New Preparatory 13.100; 07.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Occupational risk management applied to engineered nanomaterials -- Part 2: Use of the control banding approach

ISO/TS 12901-2:2014 New Preparatory 13.100; 07.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment

ISO/TR 13014:2012 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

ISO/TR 13014:2012/Cor 1:2012 New (Corrigendum) Preparatory 7.120 BPS/TC 85 NanotechnologiesNanomaterials -- Quantification of nano-object release from powders by generation of aerosols ISO/TS 12025:2012 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Guidance on voluntary labelling for consumer products containing manufactured nano-objects ISO/TS 13830:2013 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Specification for developing representative test materials consisting of nano-objects in dry powder form ISO/TS 16195:2018 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

Nanotechnology -- Nanoparticles in powder form -- Characteristics and measurements ISO/TS 17200:2013 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

Nanotechnologies -- Materials specifications -- Guidance on specifying nano-objects ISO/TS 12805:2011 New Preparatory 7.120 BPS/TC 85 Nanotechnologies

Blind rivets - Terminology and definitions ISO 14588:2000 New Preparatory 01.040.21; 21.060.40 (ISO/TC 02 Fasteners)Fasteners -- Bolts, screws, studs and nuts -- Symbols and descriptions of dimensions ISO 225:2010 New Preparatory 21.060.10 (ISO/TC 02 Fasteners)

Designation system for fasteners ISO 8991:1986 New Preparatory 21.060.01 (ISO/TC 02 Fasteners)Fasteners -- Types of inspection documents ISO 16228:2017 New Preparatory 21.060.01 (ISO/TC 02 Fasteners)Fasteners -- Terminology -- Part 2: Vocabulary and definitions for coatings ISO 1891-2:2014 New Preparatory 01.040.21; 21.060.01 (ISO/TC 02 Fasteners)

Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality ISO 1891-4:2018 New Preparatory 01.040.21; 21.060.01 (ISO/TC 02 Fasteners)

Springs - Vocabulary ISO 26909:2009 New Preparatory 01.040.21; 21.060 (ISO/TC 227 Springs)

20 of 47


STANDARDS(ICS)






6. Approval



Springs - Symbols ISO 16249:2013 New Preparatory 01.100.20; 21.160 (ISO/TC 227 Springs)Disc springs - Part 1: Calculation ISO 8991:1986 New Preparatory 21.060.01 (ISO/TC 227 Springs)Disc springs - Part 2: Technical specifications ISO 16228:2018 New Preparatory 21.060.01 (ISO/TC 227 Springs)Springs -- Shot peening -- Part 1: General procedures ISO 26910-1:2009 New Preparatory 21.160 (ISO/TC 227 Springs)

Technical product documentation -- Springs -- Part 2: Presentation of data for cylindrical helical compression springs ISO 2162-2:1993 New Preparatory 01.100.20; 21.160 (ISO/TC 227 Springs)

Rubber inner tubes for motorcycle tires – Specification DPNS 34-1:2019 Revision Circulation 83.160.10 BPS/TC 16 Rubber and Rubber-based ProductsRubber inner tubes for bicycle tires – Specification DPNS 34-2 New Drafting/Deliberation 83.160.10 BPS/TC 16 Rubber and Rubber-based ProductsRubber, vulcanized -- Preformed joint seals for use between concrete paving sections of highways -- Specification ISO 4635:2011 New Preparatory 83.140.50; 91.100.50 BPS/TC 16 Rubber and Rubber-based Products

Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers – Specification ISO 6804:2016 New Preparatory 97.060; 97.040.40; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products

Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 1: Introduction ISO 6502-1:2018 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 2: Oscillating disc curemeter ISO 6502-2:2018 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 3: Rotorless curemeter ISO 6502-3:2018 New Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity ISO 289-2:2016 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content ISO 6101-3:2014 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content ISO 6101-4:2014 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber -- Determination of ash ISO 247:2006 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based ProductsConducting and dissipative rubbers, vulcanized or thermoplastics - Measurement or resistivity ISO 1853:2011 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber – Guide to the use of curemeters ISO 6502:2016 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based ProductsRubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide ISO 18517:2015 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber and plastics hoses and hose assemblies -- Guidelines for selection, storage, use and maintenance ISO 8331:2016 Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products

Rubber, vulcanized or thermoplastic -- Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

ISO 2285:2013 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber and plastics hoses and tubing -- Determination of transmission of liquids through hose and tubing walls ISO 8308:2015 Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products

Rubber -- Antistatic and conductive products -- Determination of electrical resistance ISO 2878:2017 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber and plastics hoses -- Method of test for flammability ISO 8030:2014 Revision Preparatory 23.040.70;13.220.40 BPS/TC 16 Rubber and Rubber-based ProductsRubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing ISO 1431-1:2012 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

CONSUMER PRODUCTS AND SERVICES

21 of 47


STANDARDS(ICS)






6. Approval



Rubber, vulcanized or thermoplastic -- Determination of shear modulus and adhesion to rigid plates -- Quadruple-shear methods

ISO 1827:2011 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests ISO 188:2011 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber or plastics hoses and hose assemblies -- Hydraulic-pressure impulse test without flexing ISO 6803:2017 Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products

Rubber, vulcanized or thermoplastic -- Determination of hardness – Part 2: Hardness between 10 IRHD and 100 IRHD ISO 48-2:2010 Revision Preparatory 83.060 BPS/TC 16 Rubber and Rubber-based Products

Rubber -- Determination of magnesium content of field and concentrated natural rubber latex by titration ISO 11852:2017 Revision Preparatory 83.040.10 BPS/TC 16 Rubber and Rubber-based Products

Rubber, raw natural -- Colour index test ISO 4660:2011 Revision Preparatory 83.040.10 BPS/TC 16 Rubber and Rubber-based ProductsRubber hoses and hose assemblies for measured fuel dispensing -- Specification ISO 5772:2015 Revision Preparatory 75.200; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products

Rubber hoses and hose assemblies for water suction and discharge -- Specification ISO 4641:2016 Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products

Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems ISO 4642-1:2015 Revision Preparatory 83.140.40; 13.220.10 BPS/TC 16 Rubber and Rubber-based Products

Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles

ISO 4642-2:2015 Revision Preparatory 13.220.10; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products

Rubber hoses, textile-reinforced, for compressed air – Specification ISO 2398:2016 Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products

Rubber hoses and tubing for cooling systems for internal-combustion engines -- Specification ISO 4081:2016 Revision Preparatory 43.040.01; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products

Rubber hoses and tubing for air and vacuum systems for internal-combustion engines -- Specification ISO 11424:2017 Revision Preparatory 27.020; 83.140.30; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products

Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification ISO 1436:2017 Revision Preparatory 83.140.40; 23.100.40 BPS/TC 16 Rubber and Rubber-based Products

Rubber hose and hose assemblies for oil suction and discharge service -- Specification ISO 1823:2015 Revision Preparatory 75.200; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products

Rubber hoses and hose assemblies for saturated steam – Specification ISO 6134:2017 Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products

Bicycle tyres and rims -- Part 1: Tyre designations and dimensions ISO 5775-1:2014 Revision Preparatory 83.160.10 BPS/TC 16 Rubber and Rubber-based Products

Natural rubber latex concentrate -- Centrifuged or creamed, ammonia-preserved types -- Specifications ISO 2004:2010 Revision Preparatory 83.040.10 BPS/TC 16 Rubber and Rubber-based Products

Rubber latex, natural, concentrate -- Determination of volatile fatty acid number ISO 506:1992 Reconfirmation Preparatory 83.040.10 BPS/TC 16 Rubber and Rubber-based Products

Rubber, natural latex concentrate -- Determination of KOH number ISO 127:2012 Revision Preparatory 83.040.10 BPS/TC 16 Rubber and Rubber-based Products

Natural rubber latex concentrate -- Determination of alkalinity ISO 125:2011 Reconfirmation Preparatory 83.040.10 BPS/TC 16 Rubber and Rubber-based ProductsRubber latex -- Determination of coagulum content (sieve residue) ISO 706:2004 Reconfirmation Preparatory 83.040.10 BPS/TC 16 Rubber and Rubber-based Products

22 of 47


STANDARDS(ICS)






6. Approval



Natural rubber latex concentrate -- Determination of boric acid content ISO 1802:1992 Reconfirmation Preparatory 83.040.10 BPS/TC 16 Rubber and Rubber-based Products

Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification ISO 1403:2005 Reconfirmation Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products

Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles -- Specification ISO 8789:2009 Revision Preparatory 83.140.40; 43.060.40 BPS/TC 16 Rubber and Rubber-based Products

Rubber hoses and hose assemblies for automobile power-steering systems -- Specification ISO 11425:1996 Revision Preparatory 83.140.40; 43.040.50 BPS/TC 16 Rubber and Rubber-based Products

Machine Finish Uncoated-Book Paper – Specification PNS 221:1988 Revision Circulation BPS/TC 21 Paper, Board and PulpsMultipurpose Copy Paper – Specification PNS 222:1988 Revision Circulation BPS/TC 21 Paper, Board and PulpsFacial Tissue – Specification PNS 73:2004 Revision Deliberation BPS/TC 21 Paper, Board and PulpsCorrugating medium – Specification PNS 166:2002 Revision Deliberation BPS/TC 21 Paper, Board and PulpsHeavy duty, plain Kraft paper – Specification PNS 124:1988 Revision Preparatory BPS/TC 21 Paper, Board and PulpsTagboard – File folders – Specification PNS 71:1986 Revision Preparatory BPS/TC 21 Paper, Board and PulpsColored ruled paper – Specification PNS 265:1989 Revision Preparatory BPS/TC 21 Paper, Board and Pulps

Paper – Determination of folding endurance PNS ISO 5626:2013 (ISO Published 1993) Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps

Paper and board—Determination of bending stiffness – Resonance method

PNS ISO 5629:2013(ISO Published 1993) Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps

Paper and board – Accelerated ageing – Part 1: Dry heat treatment at 105 degrees C


Paper and board – Accelerated ageing – Part 3: Most heat treatment at 80 degrees C and 65% relative humidity

PNS ISO 5630-3:2013(ISO Published 1996) Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps

Paper and board – Accelerated ageing – Part 4: Dry heat treatment at 120 or 150 degrees C


Paper and board – Determination of resistance to water penetration


Paper – Measurement of dimensional change after immersion in water


Paper and board – Determination of air permeance (medium range) – Part 1: General method


Paper and board – Determination of air permeance (medium range) – Part 3: Bendtsen method


Pulps – Estimation of dirt and shives – Part 4: Instrumental inspection by reflected light using equivalent Black Area (EBA)


Paper and board – Determination of water absorption after immersion in water


Solid fibreboard – Determination of grammage of single layers PNS ISO 5638:2013(ISO Published 1978) Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps

Paper and board – Measurement of hygroexpansivity – Part 1: Hygroexpansivity up to a maximum relative humidity of 68%


Paper and board – Measurement of hyroexpansivity – Part 2: Hygroexpansivity up to a maximum relative humidity of 86%


23 of 47


STANDARDS(ICS)






6. Approval



Paper and board – Measurement of specular gloss – Part 2: 75 degree gloss with a parallel beam, DIN method


Paper and board – Measurement of specular gloss –Part 3: 20 degree gloss with a converging beam TAPPI method


Pulp, Paper and board – Microbiological examination – Part 1: Total count of bacteria, yeast and mould based on disintegration

PNS ISO 8784-1:2013(ISO Published 2005) Revision Preparatory 07.100.99 ; 07.100.99; 85.060 BPS/TC 21 Paper, Board and Pulps

Paper and board – Determination of capillary rise – Klemm method


Handmade Paper – Specification for printing and writing DPNS XXXX:20XX New Deliberation BPS/TC 21 Paper, Board and PulpsHandmade Paper – Specification for packaging DPNS XXXX:20XX New Deliberation BPS/TC 21 Paper, Board and PulpsHandmade Paper – Specification for cards DPNS XXXX:20XX New Deliberation BPS/TC 21 Paper, Board and PulpsFood Board Paper – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and PulpsBox Board – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and PulpsChip Board – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and PulpsPaper Towel – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and PulpsTable Napkin – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and PulpsParchment Paper – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and PulpsPaper and board – Testing of cores – Part 6: Determination of bending strength by the three-point method ISO 11093-6:2005 New Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps

Paper and board – Testing of cores – Part 7: Determination of flexural modulus by the three-point method ISO 11093-7:2011 New Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps

Paper and board – Testing of cores – Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

ISO 11093-8:2017 New Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps

Paper and board – Testing of cores – Part 9: Determination of flat crush resistance ISO 11093-9:2006 New Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps

Tissue paper and tissue products – Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption

ISO 12625-4:2016 New Preparatory 85.080.20 BPS/TC 21 Paper, Board and Pulps

Tissue paper and tissue products – Part 5: Determination of wet tensile strength ISO 12625-5:2016 New Preparatory 85.080.20 BPS/TC 21 Paper, Board and Pulps

Tissue paper and tissue products – Part 6: Determination of grammage ISO 12625-6:2016 New Preparatory 85.080.20 BPS/TC 21 Paper, Board and Pulps

Tissue paper and tissue products – Part 7: Determination of optical properties – Measurement of brightness and colour with D65/10 (outdoor daylight)


Tissue paper and tissue products – Part 8: Water-absorption time and water-absorption capacity, basket immersion test method


Tissue paper and tissue products – Part 9: Determination of ball burst strength ISO 12625-9:2015 New Preparatory 85.080.20 BPS/TC 21 Paper, Board and Pulps

Tissue paper and tissue products – Part 12: Determination of tensile strength of perforated lines – Calculation of perforation efficiency


24 of 47


STANDARDS(ICS)






6. Approval



Textiles -- Methods for determination of certain aromatic amines derived from azo colorants -- Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres

ISO 14362-1:2017 New Preparatory 59.060.01 BPS/TC 18 Textiles

Textiles -- Methods for determination of certain aromatic amines derived from azo colorants -- Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene


Textiles -- Dyestuffs -- Part 1: General principles of testing coloured textiles for dyestuff identification ISO 16373-1:2015 New Preparatory 59.060.01 BPS/TC 18 Textiles

Textiles -- Determination of deodorant property -- Part 4: Condensation sampling analysis ISO 17299-4:2015 New Preparatory 59.060.01 BPS/TC 18 Textiles

Textiles -- Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends -- Part 1: Light microscopy method


Textiles -- Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends -- Part 2: Scanning electron microscopy method


Sewing Thread-Specification PNS 28:1984 Amd.01:1988 Revision Preparatory 59.060.01 BPS/TC 18 TextilesSpun yarns - Specification PNS 76:1998 Revision Preparatory 59.060.01 BPS/TC 18 TextilesCode for labelling finished textile fabrics ready made garments and piece goods PNS 198:1988 Revision Preparatory 59.060.01 BPS/TC 18 Textiles

Textile - Polyester filament yarns - Grading PNS 257:1990 Revision Preparatory 59.060.01 BPS/TC 18 TextilesGel ink ball pens and refills - Part 1: General use ISO 27668-1:2017 New Preparatory 97.180 BPS/TC 37 School and Office Supplies

Gel ink ball pens and refills - Part 2: Documentary use (DOC) ISO 27668-2:2009 New Preparatory 97.180 BPS/TC 37 School and Office Supplies

Hand-held Cutter DPNS XXXX:20XX New Preparatory BPS/TC 37 School and Office SuppliesClip, foldback (binder clip) DPNS XXXX:20XX New Preparatory BPS/TC 37 School and Office SuppliesCorrection Tape DPNS XXXX:20XX New Preparatory BPS/TC 37 School and Office Supplies

Pressure sensitive adhesive masking paper tapes – Specification PNS 712:2008 Revision Drafting/Deliberation 55.050 BPS/TC 37 School and Office Supplies

Pressure sensitive adhesive tapes - Glossary of terms PNS 713:1992 Revision Drafting/Deliberation 55.050 BPS/TC 37 School and Office SuppliesPressure sensitive adhesive tapes - Test methods PNS 878:1992 Revision Drafting/Deliberation 55.050 BPS/TC 37 School and Office SuppliesPressure sensitive adhesive filmic and packaging tapes – Specification PNS 2041:2008 Revision Drafting/Deliberation 55.040 BPS/TC 37 School and Office Supplies

Stapler- specification PNS 1561:2008 Revision Preparatory 83.040.10 BPS/TC 37 School and Office SuppliesPuncher- specification PNS 1987:2012 Revision Preparatory 97.180 BPS/TC 37 School and Office SuppliesRuler - Specification PNS 1969:2004 Revision Preparatory 59.080.50 BPS/TC 37 School and Office SuppliesPackaging material recycling – Report on Substances and materials which may impede recycling - Guidelines

DPNS 2134:2019(ISO/TR 17098:2013) New For Circulation 55.020 BPS/TC 40 Packaging and Packaging Materials

Intermediate bulk containers (IBCs) for non-dangerous goods -- Terminology ISO 15867:2003 New Preparatory 55.080; 01.040.55 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Complete, filled transport packages and unit loads -- Dimensions of rigid rectangular packages ISO 3394:2012 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Complete, filled transport packages and unit loads -- Unit load dimensions ISO 3676:2012 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

25 of 47


STANDARDS(ICS)






6. Approval



Complete, filled transport packages -- Distribution trials -- Information to be recorded ISO 4178:1980 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Tactile warnings of danger -- Requirements ISO 8351-2:1994 New Preparatory 55.080 BPS/TC 40 Packaging and Packaging MaterialsPackaging -- Dimensional tolerances for general purpose sacks -- Part 2: Sacks made from thermoplastic flexible film ISO 8367-2:1993 New Preparatory 55.080 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Accessible design -- General requirements ISO 11156:2011 New Preparatory 11.180.99; 55.020 BPS/TC 40 Packaging and Packaging MaterialsPackaging -- Tactile warnings of danger -- Requirements ISO 11683:1997 New Preparatory 11.180.30; 55.020 BPS/TC 40 Packaging and Packaging MaterialsPackaging -- Sacks made from thermoplastic flexible film -- Tear propagation on edge folds ISO 11897:1999 New Preparatory 55.080 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Sacks -- Determination of the friction of filled sacks ISO 15119:2000 New Preparatory 55.080 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Bar code and two-dimensional symbols for shipping, transport and receiving label ISO 15394:2017 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Steel drums -- Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l ISO 15750-1:2002 New Preparatory 55.140 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Steel drums -- Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l

ISO 15750-2:2002 New Preparatory 55.140 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Steel drums -- Part 3: Inserted flange-type closure systems ISO 15750-3:2002 New Preparatory 55.140 BPS/TC 40 Packaging and Packaging Materials

Direct Marking on Plastic Returnable Transport Items (RTIs) ISO/TR 17350:2013 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging MaterialsPackaging -- Braille on packaging for medicinal products ISO 17351:2013 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging MaterialsApplication Guideline on Data Carriers for Supply Chain Management ISO/TR 17370:2013 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Codification of contents for inventories for shipments of household goods and personal effects -- Part 1: Numeric codification of inventories

ISO 17451-1:2016 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Codification of contents for inventories for shipments of household goods and personal effects -- Part 2: XML messaging structure for electronic transmission of inventory data

ISO/TS 17451-2:2017 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Label material -- Required information for ordering and specifying self-adhesive labels ISO/TS 18614:2016 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

Transport packaging -- Reusable, rigid plastic distribution boxes --Part 1: General purpose application ISO 18616-1:2016 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials

Transport packaging -- Reusable, rigid plastic distribution boxes --Part 2: General specifications for testing ISO 18616-2:2016 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials

Transport packaging -- Small load container systems -- Part 1: Common requirements and test methods ISO 19709-1:2016 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

Transport packaging -- Small load container systems -- Part 2: Column Stackable System (CSS) ISO/TS 19709-2:2016 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

Transport packaging -- Small load container systems -- Part 3: Bond Stackable System (BSS) ISO/TS 19709-3:2016 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Accessible design -- Information and marking ISO 19809:2017 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials

26 of 47


STANDARDS(ICS)






6. Approval



Packaging -- Plastics drums -- Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l ISO 20848-1:2006 New Preparatory 55.14 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Plastics drums -- Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l ISO 20848-2:2006 New Preparatory 55.140 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Plastics drums -- Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l ISO 20848-3:2018 New Preparatory 55.140 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Tamper verification features for medicinal product packaging ISO 21976:2018 New Preparatory 11.120.99 55.020 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Linear bar code and two-dimensional symbols for product packaging ISO 22742:2010 New Preparatory 01.080.99 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Labelling and direct product marking with linear bar code and two-dimensional symbols ISO 28219:2017 New Preparatory 55.020; 35.040.50 BPS/TC 40 Packaging and Packaging Materials

Packaging – Sacks – Vocabulary and types – Part 2: Sacks made from thermoplastic flexible film PNS ISO 6590-2:2011 Revision Preparatory 55.080; 01.040.55 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Sacks -- Description and method of measurement -- Part 2: Empty sacks made from thermoplastic flexible film PNS ISO 6591-2:2011 Revision Preparatory 55.08 BPS/TC 40 Packaging and Packaging Materials

Packaging -- Sacks -- Method of sampling empty sacks for testing PNS ISO 7023:2011 Revision Preparatory 55.08 BPS/TC 40 Packaging and Packaging Materials

Sacks -- Drop test -- Part 2: Sacks made from thermoplastic flexible film PNS ISO 7965-2:2009 Revision Preparatory 55.08 BPS/TC 40 Packaging and Packaging Materials

Bags for solid fertilizer - Specification PNS 95:1987 Revision Preparatory 55.020 BPS/TC 40 Packaging and Packaging MaterialsPackaging code – Adhesive for packaging PNS 714:1992 Revision Preparatory 55.020 BPS/TC 40 Packaging and Packaging MaterialsStandard Test Methods for Polariscopic Examination of Glass Containers ASTM C148-17 Revision Drafting/Deliberation 55.100 BPS/TC 40 Packaging and Packaging Materials/SC 1

Glass Containers

Standard Practice for Sampling Glass Containers ASTM C224-78 Reconfirmation Drafting/Deliberation 55.100 BPS/TC 40 Packaging and Packaging Materials/SC 1 Glass Containers

Glass containers – Vacuum lug finishes – Part 10: 77 regular ISO 9100-10:2005 Reconfirmation Preparatory 55.100 BPS/TC 40 Packaging and Packaging Materials/SC 1 Glass Containers



Glass containers – Vacuum lug finishes – Part 13: 100 ISO 9100-13:2005 Reconfirmation Preparatory 55.100 BPS/TC 40 Packaging and Packaging Materials/SC 1 Glass Containers


Test Method for determining compressive resistance of shipping containers, components, and unit loads ASTM D642-15 New Circulation 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2

Paper Packaging Complete, filled transport packages – Compression and stacking tests using a compression tester ISO 12048:1994 New Circulation 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2

Paper Packaging Complete, filled transport packages and unit loads – Conditioning for testing ISO 2233:2000 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2

Paper Packaging

27 of 47


STANDARDS(ICS)






6. Approval



Complete, filled transport packages and unit loads – Stacking tests using a static load ISO 2234:2000 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2

Paper Packaging Complete, filled transport packages and unit loads – identification of parts when testing ISO 2206:1987 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2

Paper Packaging

Complete, filled transport packages – Toppling test ISO 8768:1986 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2 Paper Packaging

Packaging -- Complete, filled transport packages and unit loads -- Vertical random vibration test ISO 13355:2016 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2

Paper Packaging Complete, filled transport packages and unit loads – Sinusoidal vibration tests using a variable frequency ISO 8318:2000 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2

Paper Packaging

Paper bag DPNS XXXX:20XX New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2 Paper Packaging

Complete, filled transport packages – Stability of unit loads ISO 10531:1992 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2 Paper Packaging

Packaging – Complete, filled transport packages and unit loads – Water-spray test PNS ISO 2875:2010 Reconfirmation Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2

Paper Packaging

Standard Practice for Fabrication of Fiberboard Shipping Boxes PNS ASTM D 5118/D 5118M:2010 Revision Deliberation 55.160 BPS/TC 40 Packaging and Packaging Materials/SC 2 Paper Packaging

Standard Practice for fabrication and closure of triple-wall corrugated PNS ASTM D 5168:2010 Revision Preparatory 55.040 BPS/TC 40 Packaging and Packaging Materials/SC 2

Paper Packaging

Standard Guide for Hand Hole Design in Corrugated Boxes PNS ASTM D 6804:2010 Revision Preparatory 55.160 BPS/TC 40 Packaging and Packaging Materials/SC 2 Paper Packaging

Standard Practice for Methods of Closing, Sealing and Reinforcing Fiberboard Boxes PNS ASTM D 1974:2010 Revision Deliberation 55.180.20 BPS/TC 40 Packaging and Packaging Materials/SC 2

Paper Packaging

Pallets for materials handling -- Vocabulary ISO 445:2013 Revision Preparatory 55.180.20; 01.040.55 BPS/TC 66 Pallets for Unit Load Method of Material Handling

Pallets for materials handling -- Flat pallets -- Part 1: Test methods ISO 8611-1:2011 Revision Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material

HandlingPallets for materials handling -- Flat pallets -- Part 2: Performance requirements and selection of tests ISO 8611-2:2011 & Amd. 01:2016 Revision Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material

HandlingPallets for materials handling -- Flat pallets -- Part 3: Maximum working loads ISO 8611-3:2011 Revision Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material

HandlingPallets for materials handling -- Flat pallets -- Part 4: Procedure for predicting creep responses in stiffness tests for plastic pallets using regression analyses

ISO/TS 8611-4:2013 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material Handling

Pallets -- Slip sheets ISO 12776:2008 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material Handling

Methods of test for pallet joints -- Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples

ISO 12777-1:1994 & Amd. 01:2008 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material Handling

Methods of test for pallet joints -- Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples

ISO 12777-2:2000 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material Handling

Methods of test for pallet joints -- Part 3: Determination of strength of pallet joints ISO 12777-3:2002 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material

Handling

28 of 47


STANDARDS(ICS)






6. Approval



Box pallets -- Principal requirements and test method ISO 13194:2011 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material Handling

Pallets for materials handling -- Quality of fasteners for assembly of new and repair of used, flat, wooden pallets ISO 15629:2002 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material

HandlingPallets for materials handling -- Quality of new wooden components for flat pallets ISO 18333:2014 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material

HandlingPallets for materials handling -- Quality of assembly of new wooden pallets ISO 18334:2010 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material

Handling

Pallets for materials handling -- Repair of flat wooden pallets ISO 18613:2014 Revision Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material Handling

Quality management systems - Guidelines for the application of ISO 9001 in local government ISO 18091 New Preparatory 03.100.70 BPS/TC 71 Government Quality Management System

Quality management Systems for Public Sector (National and LGUs) DPNS XXXX:20XX New Preparatory BPS/TC 71 Government Quality Management System

Guidance on outsourcing PNS ISO 37500:2014(ISO Published 2014) Revision Deliberation 03.080.01 BPS/TC 79 Business Process Management

Customer contact centres – Part 1: Requirements for customer contact centres ISO 18295-1:2017 New (Adoption) Preparatory 03.080.30 BPS/TC 79 Business Process Management

Customer contact centres – Part 2: Requirements for clients using the services of customer contact centres ISO 18295-2:2017 New (Adoption) Preparatory 03.080.30 BPS/TC 79 Business Process Management

Cross-border trade of second-hand goods ISO 20245:2017 New Drafting/Deliberation 03.080.30 BPS/TC 81 Consumer PolicyGuidance on unit Pricing ISO 21041:2018 New Drafting/Deliberation 03.100.20; 03.080.30 BPS/TC 81 Consumer PolicyConsumer product safety – Guidelines for suppliers PNS ISO 10377:2014 Revision Preparatory 03.080.30; 13.120; 97.020 BPS/TC 81 Consumer Policy

Packaging – Recommendations for addressing consumer needs ISO/IEC Guide 41:2018 Revision Preparatory 55.020; 01.120 BPS/TC 81 Consumer Policy

Products and related services – information for consumers ISO/IEC Guide 14:2018 Revision Preparatory 01.120 ; 97.020 BPS/TC 81 Consumer PolicySafety aspects – Guidelines for child safety in standards and other specifications ISO/IEC Guide 50:2014 Revision Preparatory 01.120 ; 97.190 BPS/TC 81 Consumer Policy

Safety aspects – Guidelines for their inclusion in standards ISO/IEC Guide 51:2014 Revision Preparatory 1.120 BPS/TC 81 Consumer PolicyGraphical Symbols – Technical guidelines for the consideration of consumers’ needs ISO/IEC Guide 74:2004 Revision Preparatory 97.020; 01.080.01 BPS/TC 81 Consumer Policy

Development of service standards – Recommendations for addressing consumer issues ISO/IEC Guide 76:2008 Revision Preparatory 03.080.01 BPS/TC 81 Consumer Policy

Instructions for use of products by consumers ISO/IEC Guide 37:2012 Revision Preparatory 03.080.30; 01.120 BPS/TC 81 Consumer PolicySustainable development in communities - Inventory of existing guidelines and approaches on sustainable development and resilience in cities

ISO/TR 37121:2017 New Drafting/Deliberation 13.020.20 BPS/TC 82 Sustainable Cities and Communities

Sustainable cities and communities - Guidance on establishing smart city operating models for sustainable communities ISO 37106:2018 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities

Smart community infrastructures - Review of existing activities relevant to metrics ISO/TR 37150:2014 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities

Smart community infrastructures - Principles and requirements for performance metrics ISO/TS 37151:2015 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities

Smart community infrastructures - Common framework for development and operation ISO/TR 37152:2016 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities

29 of 47


STANDARDS(ICS)






6. Approval



Smart community infrastructures - Maturity model for assessment and improvement ISO 37153:2017 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities

Smart community infrastructures - Best practice guidelines for transportation ISO 37154:2017 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities

Smart community infrastructures - Smart transportation for compact cities ISO 37157:2017 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities

Sea Freight Transport DPNS XXXX:20XX New Preparatory BPS/TC 84 LogisticsAir Freight Transport DPNS XXXX:20XX New Preparatory BPS/TC 84 LogisticsIntelligent transport systems -- Freight land conveyance content identification and communication (FLC-CIC) -- Part 1: Context, architecture and referenced standards

ISO 26683-1:2013 New Preparatory 55.180.01 ; 35.240.60 BPS/TC 84 Logistics

Intelligent transport systems -- Freight land conveyance content identification and communication -- Part 2: Application interface profiles

ISO 26683-2:2013 New Preparatory 55.180.01 ; 35.240.60 BPS/TC 84 Logistics

Intelligent transport systems -- Freight land conveyance content identification and communication -- Part 3: Monitoring cargo condition information during transport

ISO/DIS 26683-3:XXXX New Preparatory 55.180.01 ; 35.240.60 BPS/TC 84 Logistics

Intelligent transport systems (ITS) -- Cooperative intersection signal information and violation warning systems (CIWS) -- Performance requirements and test procedures

ISO 26683-4:2013 New Preparatory BPS/TC 84 Logistics

Intelligent transport systems -- Electronic information exchange to facilitate the movement of freight and its intermodal transfer -- Road transport information exchange methodology

ISO/TS 24533:2012 New Preparatory 03.220.20 ; 35.240.60 ; 55.180.01 BPS/TC 84 Logistics

Standard Practice for Performance Testing of Shipping Containers and Systems ASTM D4169 - 16 New Preparatory BPS/TC 84 Logistics

Wheelchairs - Part 6: Determination of maximum speed of electrically powered wheelchairs ISO 7176-6:2018 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchairs -- Part 9: Climatic tests for electric wheelchairs ISO 7176-9:2009 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)Wheelchairs -- Part 16: Resistance to ignition of postural support devices ISO 7176-16:2012 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchairs -- Part 19: Wheeled mobility devices for use as seats in motor vehicles ISO 7176-19:2008/Amd 1:2015 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchairs -- Part 22: Set-up procedures ISO 7176-22:2014 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Technical systems and aids for disabled or handicapped persons -- Wheelchair tiedown and occupant-restraint systems -- Part 1: Requirements and test methods for all systems

ISO 10542-1:2012/Cor 1:2013 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchairs - Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range ISO 7176-4:2008 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs ISO 7176-10:2008 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

30 of 47


STANDARDS(ICS)






6. Approval



Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters -- Requirements and test methods

ISO 7176-14:2008 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery


Ostomy collection bags - Part 1: Vocabulary ISO 8670-1:1988 Reconfirmation Preparatory 11.180.20 (ISO/TC 173 Assistive Products)

Ostomy collection bags - Part 2: Requirements and test methods ISO 8670-2:1996 Reconfirmation Preparatory 11.180.20 (ISO/TC 173 Assistive Products)

Urine absorbing aids - Vocabulary -- Part 1: Conditions of urinary incontinence ISO 9949-1:1993 Reconfirmation Preparatory 01.040.11 (ISO/TC 173 Assistive Products)

Hoists for the transfer of disabled persons - Requirements and test methods ISO 10535:2006 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Assistive products for persons with vision impairments and persons with vision and hearing impairments - Acoustic and tactile signals for pedestrian traffic lights

ISO 23600:2007 Reconfirmation Preparatory 11.180.30 (ISO/TC 173 Assistive Products)

Absorbent incontinence aids for urine and/or faeces - General guidelines on evaluation ISO 15621:2017 Revision Preparatory 11.180.20 (ISO/TC 173 Assistive Products)

Assistive products for persons with disability - Classification and terminology ISO 9999:2016 Revision Preparatory 11.180.01 (ISO/TC 173 Assistive Products)

Wheelchairs - Part 2: Determination of dynamic stability of electrically powered wheelchairs ISO 7176-2:2017 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchair seating - Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity

ISO 16840-2:2018 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchair seating - Part 3: Determination of static, impact and repetitive load strengths for postural support devices ISO 16840-3:2014 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchair seating - Part 4: Seating systems for use in motor vehicles ISO 16840-4:2009 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Urine collection bags - Part 1: Vocabulary ISO 8669-1:1988 Reconfirmation Preparatory 01.040.11; 11.180.20 (ISO/TC 173 Assistive Products)

Urine collection bags - Part 2: Requirements and test methods ISO 8669-2:1996 Reconfirmation Preparatory 11.180.20 (ISO/TC 173 Assistive Products)

Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 1: Determination of pH


Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches ISO 11334-1:2007 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs ISO 11334-4:1999 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Assistive products for personal hygiene that support users - Requirements and test methods ISO 17966:2016 Reconfirmation Preparatory 11.180.99; 11.180.01 (ISO/TC 173 Assistive Products)

Assistive products for blind and vision-impaired persons - Tactile walking surface indicators ISO 23599:2012 Reconfirmation Preparatory 11.180.30 (ISO/TC 173 Assistive Products)

Tips for assistive products for walking - Requirements and test methods - Part 1: Friction of tips ISO 24415-1:2009 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

31 of 47


STANDARDS(ICS)






6. Approval



Tips for assistive products for walking - Requirements and test methods - Part 2: Durability of tips for crutches ISO 24415-2:2011 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers

ISO 7176-21:2009 Reconfirmation Preparatory 11.180.10; 33.100.01 (ISO/TC 173 Assistive Products)

Wheelchairs - Part 26: Vocabulary ISO 7176-26:2007 Reconfirmation Preparatory 11.180.10; 01.040.11 (ISO/TC 173 Assistive Products)Wheelchairs - Part 28: Requirements and test methods for stair-climbing devices ISO 7176-28:2012 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 1: Systems for rearward-facing wheelchair-seated passengers

ISO 10865-1:2012 Reconfirmation Preparatory 43.100; 11.180.10 (ISO/TC 173 Assistive Products)

Wheelchair seating - Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces

ISO 16840-1:2006 Reconfirmation Preparatory 01.040.11; 11.180.10 (ISO/TC 173 Assistive Products)

Tourism and related services - Yacht harbours Part 2: Minimum requirements for intermediate service level harbours. ISO 13687-2:2017 New Preparatory 03.080.30; 03.200.99 ( ISO/TC 228 Tourism and Related Services)

Tourism and related services - Yacht harbours - Part 3: Minimum requirements for high service level harbours. ISO 13687-3:2017 New Preparatory 03.080.30; 03.200.99 ( ISO/TC 228 Tourism and Related Services)

Tourism and related services - Bareboat charter - Minimum service and equipment requirements. ISO 20410:2017 New Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)

Tourism and related services - Sustainability management system for accommodation establishments – Requirements. ISO 21401:2018 New Preparatory 03.100.70; 03.200.01 ( ISO/TC 228 Tourism and Related Services)

PNS ISO 11107:2013 (ISO published 2009) Recreational diving services - Requirements for training programmes on enriched air nitrox (EAN) diving.

ISO 11107:2009 Reconfirmation Preparatory 03.080.30; 03.200.99 ( ISO/TC 228 Tourism and Related Services)

PNS ISO 11121:2013 (ISO published 2009) Recreational diving services - Requirements for introductory programmes to scuba divin.

ISO 11121:2017 Revision Preparatory 03.200.99; 03.080.30 ( ISO/TC 228 Tourism and Related Services)

PNS ISO 13009:2016 (ISO published 2015) Tourism and related services - Requirements and recommendations for beach operation.


PNS ISO 13289:2016 (ISO published 2011) Recreational diving services - Requirements for the conduct of snorkelling excursions.


PNS ISO 13293:2012 (ISO published 2012) Recreational diving services - Requirements for gas blender training programmes. ISO 13293:2012 Reconfirmation Preparatory 03.200.99; 03.080.30 ( ISO/TC 228 Tourism and Related Services)

PNS ISO 13687:2016 (ISO published 2014) Tourism and related services - Yacht harbours - Part 1: Minimum requirements for basic service level harbours.

ISO 13687-1:2017 Revision Preparatory 03.080.30; 03.200.99 ( ISO/TC 228 Tourism and Related Services)

PNS ISO 13810:2016 (ISO published 2015) Tourism services - Industrial tourism - Service provision ISO 13810:2015 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)

32 of 47


STANDARDS(ICS)






6. Approval



PNS ISO 13811:2016 (ISO published 2015) Tourism and related services - Guidelines on developing environmental specifications for accommodation establishments.

ISO/TS 13811:2015 Reconfirmation Preparatory 13.020.01; 03.200.01 ( ISO/TC 228 Tourism and Related Services)

PNS ISO 13970:2016 (ISO published 2011) Recreational diving services - Requirements for the training of recreational snorkelling guides

ISO 13970:2011 Reconfirmation Preparatory 03.100.30; 03.200.99 ; 03.080.30 ( ISO/TC 228 Tourism and Related Services)

PNS ISO 14785:2016 (ISO published 2014) Tourist information offices - Tourist information and reception services - Requirements


PNS ISO 17679:2016 (ISO published 2016) Tourism and related services - Wellness spa - Service requirements ISO 17679:2016 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)

PNS ISO 17680:2016 (ISO published 2015) Tourism and related services - Thalassotherapy - Service requirements ISO 17680:2015 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)

PNS ISO 18065:2016 (ISO published 2015) Tourism and related services - Tourist services for public use provided by Natural Protected Areas Authorities – Requirements


PNS ISO 18513:2011 (ISO published 2003) Tourism services - Hotels and other types of tourism accommodation – Terminology.


PNS ISO 21101:2016 (ISO published 2014) Adventure tourism - Safety management systems – Requirements. ISO 21101:2014 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)

PNS ISO 21102:2016 (ISO published 2013) Adventure tourism - Leaders - Personnel competence. ISO/TR 21102:2013 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)

Safety of amusement rides and amusement devices - Part 1: Design and manufacture ISO 17842-1:2015 New Preparatory 97.200.40

(ISO/TC 254 Safety Of Amusement Rides And Amusement Devices and ASTM Committee F24 on

Amusement Rides and Devices)

Safety of amusement rides and amusement devices -- Part 2: Operation and use ISO 17842-2:2015 New Preparatory 97.200.40


Amusement Rides and Devices)Safety of amusement rides and amusement devices -- Part 3: Requirements for inspection during design, manufacture, operation and use

ISO 17842-3:2015 New Preparatory 97.200.40(ISO/TC 254 Safety Of Amusement Rides And

Amusement Devices and ASTM Committee F24 on Amusement Rides and Devices)

Biomechanical effects on amusement ride passengers ISO/TS 17929:2014 New Preparatory 13.180; 97.200.40 (ISO/TC 254 Safety Of Amusement Rides And


Standard Test Method for Composite Foam Hardness-Durometer Hardness ASTM F1957-99(2017) New Preparatory 83.1



Standard Practice for Special Requirements for Bumper Boats ASTM F2460-11 New Preparatory 47.08(ISO/TC 254 Safety Of Amusement Rides And


Standard Practice for Permanent Amusement Railway Ride Tracks and Related Devices ASTM F2960-16 New Preparatory 97.200.99



33 of 47


STANDARDS(ICS)






6. Approval



Standard Practice for Operations of Amusement Railway Rides, Devices, and Facilities ASTM F3054-18 New Preparatory 97.200.99



Standard Practice for Aerial Adventure Courses ASTM F2959-18 New Preparatory 91.040.99; 97.220.10 (ISO/TC 254 Safety Of Amusement Rides And


Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts

ASTM F2970-17 New Preparatory 97.220.99(ISO/TC 254 Safety Of Amusement Rides And


Standard Practices for Parasailing ASTM F3099-17a New Preparatory 97.220.40(ISO/TC 254 Safety Of Amusement Rides And


Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems ASTM F2376-17a New Preparatory 97.200.40; 97.220.99



Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment ASTM F2461-18 New Preparatory 97.220.10; 97.220.40


Amusement Rides and Devices)Standard Practice for Classification, Design, Manufacture, Construction, Maintenance, and Operation of Stationary Wave Systems



Standard Practice for Patron Transportation Conveyors Used with a Water Related Amusement Ride or Device ASTM F3158-16 New Preparatory 97.200.40; 97.220.40


Amusement Rides and Devices)Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada



"PNS ASTM F2137:2012 Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices" ASTM F2137-18 Revision Preparatory 97.220.99



"PNS ASTM F747:2012 Standard Terminology Relating to Amusement Rides and Devices" ASTM F747-15 Revision Preparatory 01.040.97; 97.200.99


Amusement Rides and Devices)"PNS ASTM F1159:2012 Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards"

ASTM F1159-16 Revision Preparatory 97.220.99(ISO/TC 254 Safety Of Amusement Rides And


"PNS ASTM F1193:2012 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices"

ASTM F1193-18a Revision Preparatory 97.220.99(ISO/TC 254 Safety Of Amusement Rides And


"PNS ASTM F2291:2012 Standard Practice for Design of Amusement Rides and Devices" ASTM F2291-18 Revision Preparatory 97.200.50


Amusement Rides and Devices)"PNS ASTM F2375:2012 Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions"

ASTM F2375-09(2017) Revision Preparatory 97.200.40(ISO/TC 254 Safety Of Amusement Rides And


34 of 47


STANDARDS(ICS)






6. Approval



"PNS ASTM F853:2012 (Replaced by F2974-18) Standard Practice for Auditing Amusement Rides and Devices" ASTM F2974-18 Revision Preparatory 97.220.99


Amusement Rides and Devices)"PNS ASTM F770:2012 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices"

ASTM F770-18 Revision Preparatory 97.220.99(ISO/TC 254 Safety Of Amusement Rides And


"PNS ASTM F2374:2012 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices"

ASTM F2374-17 Revision Preparatory 97.200.50 (ISO/TC 254 Safety Of Amusement Rides And


Electric wires and cables – Soft drawn (annealed) copper stranded conductors for electrical purposes – Specification PNS 1207:2006 Revision Drafting/Deliberation 29.06 BPS/TC 1 Electrical Wires and Cables

Electric wires and cables – Neutral supported secondary distribution and service drop aluminum cables rated 600 volts – Specifications

PNS 2079:2004 Revision Drafting/Deliberation 29.060.01 BPS/TC 1 Electrical Wires and Cables

Electric wires and cables – Annealed copper wires – Specification PNS 260:2004 Revision Preparatory 71.100.40 BPS/TC 1 Electrical Wires and Cables

Plasticized polyvinyl chloride compounds for electrical insulation – Specification PNS 661:2009 Revision Preparatory 29.035.20 BPS/TC 1 Electrical Wires and Cables

Electric wires and cables - Thermoplastic-insulated copper wires and cables rated 600 volts - Part 1: General specifications PNS 35-1/AMD1:2009 Revision [Amendment] Preparatory 29.06 BPS/TC 1 Electrical Wires and Cables

Electric wires and cables – Thermoplastic insulated copper wires and cables rated 600 volts – Part 2: Non-metallic flat jacketed electric wires – Specification

PNS 35-2 Revision Preparatory 29.06 BPS/TC 1 Electrical Wires and Cables

Electric wires and cables – Copper and aluminum conductors for electrical purposes – Test methods PNS 1088:2006 Revision Preparatory 29.06 BPS/TC 1 Electrical Wires and Cables

Single-capped flourescent lamps - safety requirements IEC 61199:2014 Revision (Amendment) Preparatory 29.140.30 BPS/TC 4 Lamps and Related EquipmentSafety specifications for incandescent lamps - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes IEC 60432-1:2011 Revision (Amendment) Preparatory 29.140.20 BPS/TC 4 Lamps and Related Equipment

Glow-starters for flourescent lamps IEC 60155:1993/AMD.2:2006 Revision (Amendment) Preparatory 29.140.30 BPS/TC 4 Lamps and Related EquipmentGX16t-5 capped tubular LED lamp - Safety specifications IEC 62931:2017 New Preparatory 29.140.10 BPS/TC 4 Lamps and Related EquipmentAmendment 1 - Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires

IEC 60598-2-1:1979/AMD1:1987 Revision (Amendment) Preparatory 29.140.40 BPS/TC 4 Lamps and Related Equipment

Sample preparation for measurement of mercury level in fluorescent lamps

IEC 62554:2011+AMD1:2017 New Preparatory 29.140.30 BPS/TC 4 Lamps and Related Equipment

Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements

PNS IEC 60969:2012 (IEC Pub. 2001) Revision Preparatory 29.140.30 BPS/TC 4 Lamps and Related Equipment

Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS

IEC 62321-4:2013+AMD1:2017 New Preparatory 13.020 BPS/TC 4 Lamps and Related Equipment

Plugs and socket-outlets for household and similar purposes - Part 2-5: Particular requirements for adaptors IEC 60884-2-5:2017 New Preparatory 29.120.30 BPS/TC 10 Electrical Wiring Devices/WG 1 - Plugs

and Socket-OutletsPlugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs IEC 60884-2-1:2006 New Preparatory 29.120.30 BPS/TC 10 Electrical Wiring Devices/WG 1 - Plugs

and Socket-Outlets

ELECTROTECHNICAL PRODUCTS

35 of 47


STANDARDS(ICS)






6. Approval



Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances IEC 60884-2-2:2006 New Preparatory 29.120.30 BPS/TC 10 Electrical Wiring Devices/WG 1 - Plugs

and Socket-Outlets

Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations

IEC 60884-2-3:2006 New Preparatory 29.120.30 BPS/TC 10 Electrical Wiring Devices/WG 1 - Plugs and Socket-Outlets

Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirements for plugs and socket-outlets for SELV


Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations


IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c. IEC 60906-1:2009 New Preparatory 29.120.30 BPS/TC 10 Electrical Wiring Devices/WG 1 - Plugs

and Socket-Outlets

IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c.

IEC 60906-2:2011 New Preparatory 29.120.30 BPS/TC 10 Electrical Wiring Devices/WG 1 - Plugs and Socket-Outlets

IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c.

IEC 60906-3:1994 New Preparatory 29.120.30 BPS/TC 10 Electrical Wiring Devices/WG 1 - Plugs and Socket-Outlets

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers IEC 60947-2:2016 Revision Preparatory 29.130.20 BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit Breakers

General requirements for residual current operated protective devices IEC 60755:2017 New Preparatory 29.120.50 BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit

BreakersElectrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

IEC 60898-1:2015 Revision Preparatory 29.120.50 BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit Breakers

Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation

IEC 60898-2:2016 Revision Preparatory 29.120.50 BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit Breakers

Circuit-breakers for equipment (CBE) IEC 60934:2000+AMD1:2007+AMD2:2013 New Preparatory 29.120.40; 29.120.50 BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit Breakers

Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

IEC 61540:1997+AMD1:1998 New Preparatory 29.120.01 BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit Breakers

Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility IEC 61543:1995+AMD2:2005 New (Amendment) Preparatory 29.020; 29.120.50; 33.100.10 BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit

BreakersElectrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units IEC 62019:1999+AMD1:2002 New (Amendment) Preparatory 29.120.50 BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit

BreakersSurge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems IEC 60099-4:2014 New Preparatory 29.120.50; 29.240.10 BPS/TC 10 Electrical Wiring Devices/WG 3 - Lightning

ProtectionSurge arresters - Part 5: Selection and application recommendations IEC 60099-5:2018 New Preparatory 29.120.50; 29.240.10 BPS/TC 10 Electrical Wiring Devices/WG 3 - Lightning

ProtectionSurge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - Rated 52 kV and less IEC 60099-6:2002 New Preparatory 29.120.50; 29.240.10 BPS/TC 10 Electrical Wiring Devices/WG 3 - Lightning

Protection

36 of 47


STANDARDS(ICS)






6. Approval



Surge arresters - Part 7: Glossary of terms and definitions from IEC publications 60099-1, 60099-4, 60099-6, 61643-1, 61643-12, 61643-21, 61643-311, 61643-321, 61643-331 and 61643-341

IEC PAS 60099-7:2004 New Preparatory 29.120.50; 29.240.10 BPS/TC 10 Electrical Wiring Devices/WG 3 - Lightning Protection

Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV

IEC 60099-8:2017 New Preparatory 29.120.50; 29.240.10 BPS/TC 10 Electrical Wiring Devices/WG 3 - Lightning Protection

Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations IEC 60099-9:2014 New Preparatory 29.120.50; 29.240.10 BPS/TC 10 Electrical Wiring Devices/WG 3 - Lightning

Protection

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches

IEC 60669-2-1:2002 +AMD1:2008+AMD2:2015 Revision (Amendment) Preparatory 29.120.40 BPS/TC 10 Electrical Wiring Devices/WG 6 - Switches

Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES)

IEC 60669-2-5:2013 New Preparatory 29.120.40 BPS/TC 10 Electrical Wiring Devices/WG 6 - Switches

Switches for household and similar fixed electrical installations – Part 2-6: Particular requirements – Fireman’s switches for exterior and interior signs and luminaires

IEC 60669-2-6:2012 New Preparatory 29.120.40 BPS/TC 10 Electrical Wiring Devices/WG 6 - Switches

(Continuation) Switches for household and similar fixed-electrical installations - Part 1: General requirements IEC 60669-1:2017 Revision Preparatory 29.120.40 BPS/TC 10 Electrical Wiring Devices/WG 6 - Switches

Household and similar electrical appliances – Safety – Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances

DPNS IEC 60335-2-9:2015 Revision Circulation 13.120; 97.040.20 BPS/TC 23/30 Household, Cooking and Heating Appliances

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor

PNS IEC 60335-2-89:2011 Revision Preparatory 97.130.20 BPS/TC 23/30 Household, Cooking and Heating Appliances

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers PNS IEC 60335-2-11:2011 Revision Preparatory 13.120; 97.060 BPS/TC 23/30 Household, Cooking and Heating

AppliancesSafety of household and similar electrical appliances - Part 2-2: Particular requirements for vacuum cleaners and water suction cleaning appliances

PNS IEC 60335-2-2:1993 Revision Preparatory 13.120; 97.080 BPS/TC 23/30 Household, Cooking and Heating Appliances

Safety of household and similar electrical appliances - Part 2-34: Particular requirements for motor-compressors PNS IEC 60335-2-34:2001 Revision Preparatory 97.040.30 BPS/TC 23/30 Household, Cooking and Heating

AppliancesHousehold and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements


Safety of household and similar electrical appliances - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances


Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers PNS IEC 60335-2-98:2011 Reconfirmation Preparatory 97.03 BPS/TC 23/30 Household, Cooking and Heating

Appliances

37 of 47


STANDARDS(ICS)






6. Approval



Safety of household and similar electrical appliances - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment

PNS IEC 60335-2-104:2006 Reconfirmation Preparatory 27.200; 71.100.45 BPS/TC 23/30 Household, Cooking and Heating Appliances

Safety of household and similar electrical appliances - Part 32: Particular requirements for massage appliances PNS IEC 60335-2-32:2000 Revision Preparatory 13.120; 97.170 BPS/TC 23/30 Household, Cooking and Heating

AppliancesSafety of household and similar electrical appliances - Part 2-59: Particular requirement for insect killers PNS IEC 60335-2-59:1998 Revision Preparatory 13.120; 97.180 BPS/TC 23/30 Household, Cooking and Heating

AppliancesSafety of household and similar electrical appliances - Part 65: Particular requirements for air-cleaning appliances PNS IEC 60335-2-65:2002 Revision Preparatory 23.12 BPS/TC 23/30 Household, Cooking and Heating

AppliancesMethods of measurement on receivers for television - Part 7: HDTVdisplays IEC 60107-7:1997 New Circulation 33.160.25 BPS/TC 59 Audio, Video and Multimedia Systems and

EquipmentSafety of primary and secondary lithium cells and batteries during transport IEC 62281:2016 New Circulation 29.220.10 BPS/TC 59 Audio, Video and Multimedia Systems and

EquipmentAudio, video and similar electronic apparatus - Safety requirements PNS IEC 60065:2013 (IEC published 2011) Revision Deliberation 97.020 BPS/TC 59 Audio, Video and Multimedia Systems and

Equipment

PNS 1999 Peak music power output -- Method of Measurement PNS 1999:2002 Revision Deliberation 33.160.01 BPS/TC 59 Audio, Video and Multimedia Systems and Equipment

Audio video and related equipment – Energy efficiency factor (EEF) and labeling Requirements – Part 1: Television set PNS 2098-1:2013 Revision Preparatory 33.160.25 BPS/TC 59 Audio, Video and Multimedia Systems and

EquipmentTelevision Receivers and Video Monitors – Viewing Screen Dimensions – Method of Measurement PNS 378:2000 Revision Preparatory 33.160.25 BPS/TC 59 Audio, Video and Multimedia Systems and

EquipmentInteroperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones IEC 62684:2018 New Preparatory 33.160.01 BPS/TC 59 Audio, Video and Multimedia Systems and

EquipmentRotating electrical machines - Part 6: Methods of cooling (IC Code) IEC 60034-6:1991 New Preparatory 29.160.01 BPS/TC 58 Rotating Machinery

Rotating electrical machines - Part 11: Thermal protection IEC 60034-11:2004 New Preparatory 29.160.01 BPS/TC 58 Rotating MachineryRotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

IEC 60034-14:2003/AMD1:2007 New (Amendment) Preparatory 29.160.01 BPS/TC 58 Rotating Machinery

Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines IEC 60034-15:2009 New Preparatory 29.160.01 BPS/TC 58 Rotating Machinery

Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines IEC 60034-18-1:2010 New Preparatory 29.160.01 BPS/TC 58 Rotating Machinery

Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification

IEC 60034-18-21:2012 New Preparatory 29.160.01 BPS/TC 58 Rotating Machinery

Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies IEC 60034-19:2014 New Preparatory 29.160.01 BPS/TC 58 Rotating Machinery

Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

IEC 60034-28:2012 New Preparatory 29.160.01 BPS/TC 58 Rotating Machinery

Rotating electrical machines - Part 23: Specification for the refurbishing of rotating electrical machines IEC 60034-23:2003 New Preparatory 29.160.01 BPS/TC 58 Rotating Machinery

38 of 47


STANDARDS(ICS)






6. Approval



Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions IEC 60334-16-1:2011 New Drafting/Deliberation 29.160.01 BPS/TC 58 Rotating Machinery

Power transformers – Part 1: General DPNS IEC 60076-1:2019 (IEC pub. 2011) Revision Circulation 29.180 BPS/TC 69 Power Transformer

Power transformers - Part 5: Ability to withstand short circuit PNS IEC 60076-5:2006 Revision Preparatory 29.180 BPS/TC 69 Power TransformerPower transformers - Part 20: Energy efficiency IEC TS 60076-20:2017 New Preparatory 29.180 BPS/TC 69 Power TransformerPower transformers - Part 7: Loading guide for oil-immersed power transformers IEC 60076-7:2005 New Preparatory 29.180 BPS/TC 69 Power Transformer

Power transformers - Part 11: Dry-type transformers IEC 60076-11:2004 New Preparatory 29.180 BPS/TC 69 Power TransformerPower transformers - Part 12: Loading guide for dry-type power transformers IEC 60076-12:2008 New Preparatory 29.180 BPS/TC 69 Power Transformer

Power transformers - Part 13: Self-protected liquid-filled transformers IEC 60076-13:2006 New Preparatory 29.180 BPS/TC 69 Power Transformer

Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials IEC 60076-14:2013 New Preparatory 29.180 BPS/TC 69 Power Transformer

Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators IEC 60076-21:2011 New Preparatory 29.180 BPS/TC 69 Power Transformer

Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

IEC 60364-4-41:2005+AMD1:2017/COR1:2018 [New](Corrigendum) Preparatory 13.260; 91.140.50 BPS/TC 77 Electrical Installation and Protection

Against Electric ShockLow-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects IEC 60364-4-42:2010+AMD1:2014 [New](Amendment) Preparatory 13.260; 91.140.50 BPS/TC 77 Electrical Installation and Protection

Against Electric ShockLow-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent IEC 60364-4-43:2008 New Preparatory 13.260; 91.140.50 BPS/TC 77 Electrical Installation and Protection

Against Electric ShockLow-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

IEC 60364-4-44:2007+AMD1:2015+AMD2:2018 [New](Amendment) Preparatory 13.260; 91.140.50 BPS/TC 77 Electrical Installation and Protection

Against Electric Shock

Methods of measurement of the suppression characteristics of passive EMC filtering devices IEC CISPR 17:2011 New Circulation 33.100.01 BPS/TC 74 Electomagnetic Compatibility

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

IEC CISPR 16-1-1:2015 New Circulation 33.100.10 BPS/TC 74 Electomagnetic Compatibility

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

IEC CISPR 16-2-1:2014 with Amendment 1:2017 New Circulation 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility

Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers

IEC CISPR 25:2016 New Circulation 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

IEC CISPR/TR 16-4-1:2009 New Organization Meeting 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

IEC CISPR 16-4-2:2011+AMD1:2014+AMD2:2018 CSV New Organization Meeting 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility

39 of 47


STANDARDS(ICS)






6. Approval



Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced product

IEC CISPR TR 16-4-3:2004+AMD1:2006 CSV New Organization Meeting 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services calculation of limits for the protection of radio services

IEC CISPR TR 16-4-4:2007+AMD1:2017 CSV New Organization Meeting 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility

Electromagnetic compatibility of multimedia equipment – Emission requirements

PNS IEC CISPR 13:2012 (IEC pub 2009) PNS IEC CISPR 22:2012 (IEC pub 2008) Revision Preparatory 33.100.10 BPS/TC 74 Electomagnetic Compatibility

BPS/TC 60/ SC 1 IT Security techniques priority standards ISO/IEC JTC 1/SC 27 IT Security techniques New/Revision Preparatory 35.030 BPS/TC 60 Information Technology

BPS/TC 60/ SC 2 IT for learning, education and training priority standards

ISO/IEC JTC 1/SC 36 Information technology for learning, education and

training New/Revision Preparatory 35.240.90 BPS/TC 60 Information Technology

BPS/TC 60/ SC 3 Software and systems engineering and IT Service Management and IT Governance

ISO/IEC JTC 1/SC 7 Software and systems engineering and ISO/IEC JTC 1/SC 40 IT Service Management and IT Governance

New/Revision Preparatory 35.080; 35.020; 03.080.99 BPS/TC 60 Information Technology

Information technology – Security techniques – Privacy framework

ISO/IEC 29100: 2011 with Amendment 1:2018 (adoption) New Circulation 35.030 BPS/TC 60 Information Technology

SC 1 IT Security TecniquesInformation technology — Security techniques — Information security management — Monitoring, measurement, analysis and evaluation

PNS ISO/IEC 27004:2015 (ISO/IEC published 2009) Revision Circulation 03.100.70; 35.030 BPS/TC 60 Information Technology

SC 1 IT Security Tecniques

Information technology — Security techniques — Guidelines for information security management systems auditing

PNS ISO/IEC 27007:2015 (ISO published 2011) Revision Circulation 03.100.70; 35.030 BPS/TC 60 Information Technology

SC 1 IT Security TecniquesInformation technology — Security techniques — Information security management for inter-sector and inter-organizational communications



Information technology — Security techniques — Code of practice for Information security controls based on ISO/IEC 27002 for telecommunications organizations



Information technology – Security techniques – Information security management systems – Overview and vocabulary

PNS ISO/IEC 27000:2016 (ISO published 2016) Revision Organization Meeting 01.040.35; 03.100.70; 35.030 BPS/TC 60 Information Technology

SC 1 IT Security TecniquesInformation technology – Security techniques – Information security controls for the energy utility industry ISO/IEC 27019:2017 New Organization Meeting 03.100.70 BPS/TC 60 Information Technology

SC 1 IT Security TecniquesInformation technology – Security techniques – Competence requirements for information security management systems professionals

ISO/IEC 27021:2017 New Organization Meeting 03.100.70; 35.030 BPS/TC 60 Information TechnologySC 1 IT Security Tecniques

Information technology – Security techniques – Network security – Part 6: Securing wireless IP network access ISO/IEC 27033-6:2016 New Organization Meeting 35.030 BPS/TC 60 Information Technology


40 of 47


STANDARDS(ICS)






6. Approval



Information technology – Security techniques – Guidance on assuring suitability and adequacy of incident investigative method

ISO/IEC 27041:2015 New Organization Meeting 35.030 BPS/TC 60 Information TechnologySC 1 IT Security Tecniques

Information technology -- Security techniques -- Guidelines for the analysis and interpretation of digital evidence ISO/IEC 27042:2015 New Preparatory 35.030 BPS/TC 60 Information Technology

SC 1 IT Security TecniquesInformation technology -- Security techniques -- Authentication context for biometrics

ISO/IEC 24761:2009 with Corrigendum 1:2013 New Preparatory 35.030 BPS/TC 60 Information Technology

SC 1 IT Security TecniquesInformation technology -- Security techniques -- Security assessment of operational systems ISO/IEC TR 19791:2010 New Preparatory 35.030 BPS/TC 60 Information Technology

SC 1 IT Security TecniquesInformation technology – Learning, education, and training – Requirements for e-textbooks in education

ISO/IEC TR 18120 with Amendment 1:2019 (ISO/IEC published 2016) New Circulation 35.240.90 BPS/TC 60 Information Technology

SC 2 IT for Learning, Education and TrainingInformation technology – Individualized adaptability and accessibility in e-learning, education and training – Part 2: "Access for all" personal needs and preferences for digital delivery

ISO/IEC 24751-2:2008 New Circulation 03.100.30; 35.240.90 BPS/TC 60 Information TechnologySC 2 IT for Learning, Education and Training

Information technology – Individualized adaptability and accessibility in e-learning, education and training – Part 3: "Access for all" digital resource description

ISO/IEC 24751-3:2008 New Circulation 03.100.30; 35.240.90 BPS/TC 60 Information TechnologySC 2 IT for Learning, Education and Training

Information technology -- Learning, education and training -- Collaborative technology -- Collaborative workplace -- Part 1: Collaborative workplace data model

ISO/IEC 19778-1:2015 New Organization Meeting 03.100.30; 35.240.90 BPS/TC 60 Information TechnologySC 2 IT for Learning, Education and Training

Information technology -- Learning, education and training -- Collaborative technology -- Collaborative workplace -- Part 2: Collaborative environment data model


Information technology -- Learning, education and training -- Collaborative technology -- Collaborative workplace -- Part 3: Collaborative group data model


Information technology -- Learning, education and training -- Collaborative technology -- Collaborative learning communication -- Part 1: Text-based communication

ISO/IEC 19780-1:2015 New Preparatory 03.100.30; 35.240.90 BPS/TC 60 Information TechnologySC 2 IT for Learning, Education and Training

Information technology -- Learning, education and training -- Metadata for learning resources -- Part 1: Framework

ISO/IEC 19788-1:2011 with Amendment 1:2014 New Preparatory 03.100.30; 35.240.90 BPS/TC 60 Information Technology

SC 2 IT for Learning, Education and Training

Information technology -- Learning, education and training -- Metadata for learning resources -- Part 5: Educational elements ISO/IEC 19788-5:2012 New Preparatory 03.100.30; 35.240.90 BPS/TC 60 Information Technology

SC 2 IT for Learning, Education and Training

Information technology for learning, education and training -- Information model for competency -- Part 1: Competency general framework and information model


Information technology for learning, education and training -- Information model for competency -- Part 2: Proficiency level information model


Information technology for learning, education and training -- Learning analytics interoperability -- Part 1: Reference model ISO/IEC TR 20748-1:2016 New Preparatory 03.100.30; 03.180; 35.240.90 BPS/TC 60 Information Technology

SC 2 IT for Learning, Education and TrainingInformation technology for learning, education and training -- Nomadicity and mobile technologies -- Part 1: Nomadicity reference model

ISO/IEC TS 29140-1:2011 New Preparatory 03.100.30; 35.240.90 BPS/TC 60 Information TechnologySC 2 IT for Learning, Education and Training

41 of 47


STANDARDS(ICS)






6. Approval



Information technology for learning, education and training -- Nomadicity and mobile technologies -- Part 2: Learner information model for mobile learning

ISO/IEC TS 29140-2:2011 New Preparatory 03.100.30; 35.240.90 BPS/TC 60 Information TechnologySC 2 IT for Learning, Education and Training

Information technology -- Identification of privacy protection requirements pertaining to learning, education and training (LET) -- Part 1: Framework and reference model

ISO/IEC TS 29140-2:2011 New Preparatory 03.100.30 ;35.240.90 BPS/TC 60 Information TechnologySC 2 IT for Learning, Education and Training

Information technology — Service management — Part 1: Service management system requirements ISO/IEC 20000-1:2018 New Circulation 35.020; 03.080.99

BPS/TC 60 Information TechnologySC 3 Software and Systems Engineering & IT Service

Manangement and IT Governance

Information technology — Service management — Part 2: Guidance on the application of service management systems ISO/IEC 20000-2:2012 New Circulation 35.020; 03.080.99


Manangement and IT GovernanceInformation technology — Service management — Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1

ISO/IEC 20000-3:2012 New Circulation 35.020; 03.080.99 BPS/TC 60 Information Technology

SC 3 Software and Systems Engineering & IT Service Manangement and IT Governance

Information technology — Service management — Part 5: Exemplar implementation plan for ISO/IEC 20000-1 ISO/IEC TR 20000-5:2013 New Circulation 35.020; 03.080.99


Manangement and IT GovernanceInformation technology – Service management – Part 6: Requirements for bodies providing audit and certification of service management systems

ISO/IEC 20000-6:2017 New Drafting/Deliberation 03.080.99; 03.120.20; 35.020 BPS/TC 60 Information Technology


Information technology – Service management – Part 10: Concepts and terminology ISO/IEC TR 20000-10:2018 New Drafting/Deliberation 35.020; 03.080.99


Manangement and IT GovernanceInformation technology – Service management – Part 11: Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: ITIL®

ISO/IEC TR 20000-11:2015 New Drafting/Deliberation 03.080.99; 35.020BPS/TC 60 Information Technology


Information technology – Service management – Part 12: Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: CMMI-SVC

ISO/IEC TR 20000-12:2016 New Drafting/Deliberation 03.080.99; 35.020BPS/TC 60 Information Technology


Software engineering -- Guidelines for the application of ISO 9001:2015 to computer software

PNS ISO/IEC 90003:2004 (ISO published 2004) Revision Preparatory 03.100.70; 35.080


Manangement and IT GovernanceSystems and software engineering – Framework for categorization of IT systems and software, and guide for applying it

PNS ISO/IEC/TR 12182:2004 (ISO/IEC/TR published 1998) Revision Preparatory 35.080



Systems and software engineering – Software life cycle processes

PNS ISO/IEC 12207:2004 (ISO/IEC published 1995 with Amd. 1:2002) Revision Preparatory 35.080



Information technology – Measurement and rating of performance of computer based software systems

PNS ISO/IEC 14756:2004 (ISO/IEC published 1999) Reconfirmation Preparatory 35.080



Software Engineering – Software Life Cycle Processes – Maintenance

PNS ISO/IEC 14764:2004 (ISO/IEC published 1999) Revision Preparatory 35.080



42 of 47


STANDARDS(ICS)






6. Approval



Information processing – Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts

PNS ISO 5807:2013 (ISO published 1985) Reconfirmation Preparatory 35.080; 01.080.50 BPS/TC 60 Information Technology


Information processing systems – Computer system configuration diagram symbols and conventions PNS ISO 8790:2013 (ISO published 1987) Reconfirmation Preparatory 35.080; 01.080.50


Manangement and IT GovernanceCleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness by particle concentration ISO 14644-1:2015 New Finalization 13.040.35 BPS/TC 83 Cleanrooms and Associated Controlled

EnvironmentsCleanrooms and associated controlled environments -- Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration

ISO 14644-2:2015 New Finalization 13.040.35 BPS/TC 83 Cleanrooms and Associated Controlled Environments

Cleanrooms and associated controlled environments -- Part 3: Test methods ISO 14644-3:2005 New Finalization 13.040.35 BPS/TC 83 Cleanrooms and Associated Controlled

EnvironmentsCleanrooms and associated controlled environments -- Part 4: Design, construction and start-up ISO 14644-4:2001 New Deliberation 13.040.35 BPS/TC 83 Cleanrooms and Associated Controlled

EnvironmentsCleanrooms and associated controlled environments -- Part 5: Operations ISO 14644-5:2004 New Preparatory 13.040.35 BPS/TC 83 Cleanrooms and Associated Controlled

EnvironmentsCleanrooms and associated controlled environments -- Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)

ISO 14644-7:2004 New Preparatory 13.040.35 BPS/TC 83 Cleanrooms and Associated Controlled Environments

Cleanrooms and associated controlled environments -- Part 8: Classification of air cleanliness by chemical concentration (ACC) ISO 14644-8:2013 New Preparatory 13.040.35 BPS/TC 83 Cleanrooms and Associated Controlled

Environments

Cleanrooms and associated controlled environments -- Part 9: Classification of surface cleanliness by particle concentration ISO 14644-9:2012 New Preparatory 13.040.35 BPS/TC 83 Cleanrooms and Associated Controlled

Environments

Cleanrooms and associated controlled environments -- Part 10: Classification of surface cleanliness by chemical concentration ISO 14644-10:2013 New Preparatory 13.040.35 BPS/TC 83 Cleanrooms and Associated Controlled

Environments

Cleanrooms and associated controlled environments -- Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration


Cleanrooms and associated controlled environments -- Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications


Cleanrooms and associated controlled environments -- Part 14: Assessment of suitability for use of equipment by airborne particle concentration


Cleanrooms and associated controlled environments -- Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration


Cleanrooms and associated controlled environments -- Biocontamination control -- Part 1: General principles and methods


43 of 47


STANDARDS(ICS)






6. Approval



Cleanrooms and associated controlled environments -- Biocontamination control -- Part 2: Evaluation and interpretation of biocontamination data

ISO 14698-2:2003 with Corrigendum 1:2004 New Preparatory 13.040.35 BPS/TC 83 Cleanrooms and Associated Controlled

Environments

Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance IEC 60546-1:2010 New Preparatory 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)

Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing

IEC 60546-2:2010 New Preparatory 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Thermocouples - Part 1: EMF specifications and tolerances IEC 60584-1:2013 New Preparatory 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system IEC 60584-3:2007 New Preparatory 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions IEC 60654-1:1993 New Preparatory 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)Operating conditions for industrial-process measurement and control equipment. Part 2: Power IEC 60654-2:1979+AMD1:1992 New Preparatory 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences IEC 60654-3:1983 New Preparatory 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)

Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences IEC 60654-4:1987 New Preparatory 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)

Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts


Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology


Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality


Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance


Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability


Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability


Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety


Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties


44 of 47


STANDARDS(ICS)






6. Approval



Management of alarm systems for the process industries IEC 62682:2014 New Preparatory 13.320 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Expression of performance of air quality infra-red analyzers IEC 60528:1975 New Preparatory 13.040.01 17.020 31.260 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments

IEC TR 60668:1980 New Preparatory 29.100.01 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 IEC TR 61508-0:2005 New Preparatory 25.040.40; 29.020; 35.240.50 (IEC/TC TC 65/SC 65B - Measurement and control

devices)

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements IEC 61508-1:2010 New Preparatory 13.110; 25.040.40; 29.020 (IEC/TC TC 65/SC 65B - Measurement and control

devices)Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems


Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3-1: Software requirements - Reuse of pre-existing software elements to implement all or part of a safety function

IEC TS 61508-3-1:2016 New Preparatory 25.040.40; 35.240.50 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels


Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3


Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures

IEC 61508-7:2010 New Preparatory 25.040.40; 35.240.50 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Functional safety - Safety instrumented systems for the process industry sector - Part 0: Functional safety for the process industry and IEC 61511

IEC TR 61511-0:2018 New Preparatory 13.110; 25.040.01 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements

IEC 61511-1:2016+AMD1:2017 CSV New Preparatory 13.110; 25.040.01 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016

IEC 61511-2:2016 New Preparatory 13.110; 25.040.01 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels

IEC 61511-3:2016 New Preparatory 13.110; 25.040.01 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Batch control - Part 1: Models and terminology IEC 61512-1:1997 New Preparatory 25.040.40; 01.040.25 (IEC/TC TC 65/SC 65B - Measurement and control devices)

45 of 47


STANDARDS(ICS)






6. Approval



Batch control - Part 2: Data structures and guidelines for languages IEC 61512-2:2001 New Preparatory 35.240.50 (IEC/TC TC 65/SC 65B - Measurement and control

devices)Batch control - Part 3: General and site recipe models and representation IEC 61512-3:2008 New Preparatory 25.040.40; 35.240.50 (IEC/TC TC 65/SC 65B - Measurement and control

devices)

Batch control - Part 4: Batch production records IEC 61512-4:2009 New Preparatory 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Industrial-process control valves - Part 1: Control valve terminology and general considerations IEC 60534-1:2005 New Circulation 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions IEC 60534-2-1:2011 & COR1:2015 New Circulation 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)Industrial-process control valves - Part 2-3: Flow capacity - Test procedures IEC 60534-2-3:2015 New Circulation 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability IEC 60534-2-4:2009 New Circulation 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves

IEC 60534-3-1:2000 New Circulation 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves IEC 60534-3-2:2001 New Circulation 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)

Industrial-process control valves - Part 3-3: Dimensions End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves

IEC 60534-3-3:1998 New Circulation 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Industrial-process control valves - Part 4: Inspection and routine testing IEC 60534-4:2006 New Circulation 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)

Industrial-process control valves - Part 5: Marking IEC 60534-5:2004 New Preparatory 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators

IEC 60534-6-1:1997 New Preparatory 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control devices)

Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators


Industrial-process control valves - Part 7: Control valve data sheet IEC 60534-7:2010 New Preparatory 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)Industrial-process control valves - Part 8-1: Noise considerations -Laboratory measurement of noise generated by aerodynamic flow through control valves


Industrial-process control valves - Part 8-2: Noise considerations -Laboratory measurement of noise generated by hydrodynamic flow through control valves


Industrial-process control valves - Part 8-4: Noise considerations -Prediction of noise generated by hydrodynamic flow IEC 60534-8-4:2015 New Preparatory 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)

46 of 47


STANDARDS(ICS)






6. Approval



Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs IEC 60534-9:2007 & COR 1:2008 New Preparatory 23.060.40 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control

devices)

Prepared by: Respective Technical Officer Approved by:Consolidated By:

RHEYCHELLE JEAN A. PIDOC ENGR. MARIO U. GAUDIANOTechnical Officer Chief, Standards Development Division

47 of 47

STANDARDS As of 21 January 2019 - BPS S&C Portal · Steel castings -- Magnetic particle inspection...

Documents

Transcript of STANDARDS As of 21 January 2019 - BPS S&C Portal · Steel castings -- Magnetic particle inspection...