STANDARD SPECIFICATIONS - timpte.com€¦ · STAINLESS STEEL BLACK WHITE SILVER AG HOPPER STANDARD...

WWW.TIMPTE.COM

STANDARD SPECIFICATIONS

SINCE 1884

• A commitment to service • A reputAtion for quAlity• A never ending pursuit of excellence

Timpte Inc. has been manufacturing bulk commodity trailers for over 12 decades. As one of the pioneers in the development of these trailers, we have positioned ourselves to serve your needs today and in the future. Timpte trailers are designed for those who require the best. We design strength and performance into each new Timpte, but that’s only part of our story. Timpte’s insistence on using only the finest materials is further assurance of unsurpassed value. We use only the highest quality aluminum and steel in our construction.

The engineering and design leadership that goes into each Timpte trailer shows in our distinctive good looks, craftsmanship, structural detail, and the methods by which Timpte trailers are produced. Value comes from Timpte’s tradition of quality. We are recognized throughout the bulk commodity transportation industry as the leader in quality. To understand what trailer value is all about, take a look at a new Timpte. There’s a reason we are the #1 manufacturer of bulk commodity trailers in the country.

SINCE 1884

TRI-AXLE MODELS: Lengths - 45’,48’, and 50’Widths - 96” and 102”

FARM HOPPERS:

SPREAD-AXLE MODELS:

Lengths - 22’, 28’6”, 33’5”, 36’, and 38’Widths - 96” and 102” (22’ - Only available in 96” wide )

Lengths - 48’ and 50’ Widths - 96” and 102”

STANDARD HOPPERS:

SUPER CUBE:

Lengths - 40’ and 42’2” Widths - 96” and 102”

Lengths - 43’ OnlyWidth - 96” and 102”

Length - 50’ OnlyWidth - 96” Only

SL TRI-AXLE MODELS:SL STANDARD MODELS: Lengths - 40’ and 42’2” Width - 96” Only

Super Hopper SL Series

SINCE 1884

LEAD & PUP: Lengths - Lead 28’6” 33’5”, 36’ ,38’, 40’, 42’2”, 43’, 45’, and 50’ Pup 21’Widths - 96” and 102”

Electrical; All weather-pack automotive style connections, sealed to prevent corrosion. Each trailer sidewall comes with 2 rows of 3 LED lights; (3) amber LED, (2) red LED, and (1) amber mid turn/marker light.

The upper coupler assembly is a beam truss designed for the riggers of field use. Extra crossmembers and an “X” brace are added for extra strength for field application.

BUILT TO A HIGHER STANDARD

.063” aluminum panels are used in high stress areas for added strength and durability.(2) .063 panels on 38’ - 43’(3) 063 panels on 48’ - 50’

•

•

•

Standard with aluminum ladder, platform, and 36” grab bar on front (2 on Rear)

20” king pin setting. Allows for better load distribution and more swing clearance.

4’ Exterior Side Panels; A long time Timpte trademark that offers unmatched strength and ease of repair. The smooth aerodynamic exterior sidewalls mean less wind drag and lower fuel costs.

Timpte double wall construction allows for a smooth interior wall, thus improving flow of grain. No ledge or dead spot for grain or bulk commodities to build up like other brands. Note the interior trap door seal protects against moisture intrusion.

TIMPTE OFFERS MORE STANDARD FEATURES THAN ANY OTHER TRAILER MANUFACTURER

••

•••

•

•

Timpte’s standard landing gear is a Holland Atlas 55 “No Lube” with a low profile cushion foot sand shoe.

Timpte traps are made of 1/4” aluminum plate with hat section stiffeners to minimize deflection. Each door rides on 26 sealed H.D. 1.6” diameter roller bearings designed to give years of trouble free service.

• •

•

•

See Timpte Warranty Card for details.

Timpte reserves the right to change design or specifications without notice. Information contained herein is general in nature and is not intended for specific applications purposes.

Timpte offers an industry leading 3 year “Peace of Mind” no hassle warranty on all new trailers.

•

••

BUILT TO A HIGHER STANDARD

Standard Flip Step Ladder; The TimpteOriginal! A functional ladder extension that stores in the upward position and is swung down to provide unequaled rear access and safety.

Heavy duty extruded aluminum box design top rail eliminates having to use fixed structural tarp bows. Timpte bows are easily replaced if damaged. Two ridge straps are standard.

Rear Lamps; Six 4” diameter round LED sealed lamps, two red turn, and four red stop/ clearance combination.

Standard air ride suspension is de-signed with rugged tubular main beams and crossmembers. This design has been proven superior to G rail or C channel subframes.

Standard ABS System; Timpte is standard with the premium Meritor/Wabco A.B.S. system utilizing four wheel sensors, and two modulating valves.

Air ride Dump Valve and Oil Filled Pressure Gauge; Included with all air-ride suspensions in a weather-proof sealed box.

Improved Single Speed Door Opener; The trap operator shaft on single speed openers has been repositioned for ease of operation and clearance for swing augers.

TIMPTE OFFERS MORE STANDARD FEATURES THAN ANY OTHER TRAILER MANUFACTURER

•

Rear Corner Frame Posts; Gives all models the ability to vent through the corner posts.

18 oz. All-Welded Tarp; Heat-welded seams add strength and thickness to high stress areas.

•••

•

•

•

•


*The trailer shown above is used for DEMONSTRATION purposes only. All referenced points are standard features on all Timpte models.

Option upgrades on this trailer include; 2 rows of 5 lights, 2 extra wall protectors,stainless steel corners, front splash guards, and outside level 1 aluminum wheels

SINCE 1884

•

•Extruded aluminum bracing with stainless steel hardware

STAINLESS STEEL

BLACK WHITE

SILVER

AG HOPPERSTANDARD SPLIT TUB

HI-FLOW25”17”

20.5”

Design: Two piece formed tub Aluminum: .125” Side Slope: 35.8 DegreesGround Clearance: 25”

Design: Two piece formed tub Aluminum: .125” Side Slope: 43.5 DegreesGround Clearance: 17”*Riveted Split Tub with .080” and .100” aluminum - standard for all 102” wide trailers and 96” wide 43’ - 50’

Design: Two piece formed tub Aluminum: .125” Side Slope: 43.5 DegreesGround Clearance: 20.5”

Other Colors: Available Upon Request

WHITE

Two Speed Trap OperatorsLanding Gear Mud FlapsFront Splash Guards

Front/Rear EnclosureEnclosed Tarp CapsRemovable Vibrators

Interior Access StepsSight Glass WindowsDust Shields

AVAILABLE SIDEWALL HEIGHTS

102”

96”

90”

84”

78”

72”

66”

SINCE 1884

Stainless Steel NoseStainless Steel RearStainless Steel Corners

TIMPTE OFFERS A WIDE VARIETY OF OPTIONS TO CUSTOMIZE YOUR TRAILER

POWER TARP

5000 SERIES

THUNDERwith One-TouchTM Technology

Industries BEST Swing Clearance

One-Touch™ Technology allows the operator to open and close the tarp system with one push of a button One-Touch™ Technology works by measuring amperage load to a preset value

Start, stop, and reverse your tarp direction with one push of a button

Simple 3-button remote design is easy to operate, with large easy-to-read buttons

This powerful remote can operate up to 5 different trailer accessories with a maximum range of 100 ft. • Tarp • Front Hopper • Rear Hopper • 3rd Hopper • Work Lights • etc.

TAKE CONTROL WITH ONE REMOTE

POWER TRAPTHUNDER

Features:• No Limit Switches• Utilizes amperage control technology• Moisture-resistant control box• Motor uses optimal torque for fast

smooth operation

• No damage to motors, doors, and trap frames from slamming doors

• Easy motor disconnect for manual operation

Features:• Industries BEST swing clearance; No

trap operator or motor to interfere with swing auger

• Operates using a single 12 volt hydraulic motor

• No Limit Switches• Easily control product flow by

feathering the door open or close• Hydraulic motor and reservoir are

protected in the apex of the trailer

ENGINEERED FOR PERFORMANCE & POWERED BY TECHNOLOGY

Fig. Super Lite Option 96” Wide 102” Wide

A. Aluminum Upper Coupler................................. 435 lbs. 470 lbs.B. (4) Aluminum Wheels / 22.5 Wide Base Tires. 764 lbs. 764 lbs.C. Aluminum Subframe w/ TP Axles.................... 206 lbs. 206 lbs.D. Lightweight Hubs & Drums.............................. 160 lbs. 160 lbs.

Fig. C

Fig. A

Fig. D

Available Side Marker L.E.D. Light Configurations:

1 row of 31 row of 51 row of 92 rows of 3 (Standard)2 rows of 5 2 rows of 93 rows of 33 rows of 53 rows of 73 rows of 9

* Extra Spacing; Available on any 2 row configuration

Fig. B

WORK

Available Locations: Apex, Interior Tubs, & Rear Header

2 Backup Incandescent Lights on Lower Bumper Rail

L.E.D. Three (3) Light Cluster on Lower Bumper Rail

L.E.D. Seven (7) Lights on Rear HeaderFour (4) Outside Lights Turn/Clearance Three (3) Inside Lights Stop/clearance

Average Weight Savings

Clear Lights Optional

Amber Lights Standard

Rear Corner Post Lights

CAPACITIES CUBIC FEET

LENGTH & HEIGHTHEAPED 9” WATER LEVEL

96” Wide 102” Wide 96” Wide 102” Wide36’ 0” Length, 66” Height 1,327 ft3 1,420 ft3 1,172 ft3 1,254 ft3

36’ 0” Length, 72” Height 1,459 ft3 1,562 ft3 1,304 ft3 1,396 ft3


36’ FARM HOPPERCAPACITIES CUBIC FEET


96” Wide 102” Wide 96” Wide 102” Wide28’ 6” Length, 66” Height 1,037 ft3 1,108 ft3 913 ft3 976 ft3



28’ 6” FARM HOPPER



96” Wide 102” Wide 96” Wide 102” Wide21’ 11” Length, 66” Height 828 ft3 --- 734 ft3 ---21’ 11” Length, 72” Height 908 ft3 --- 814 ft3 ---21’ 11” Length, 78” Height 988 ft3 --- 894 ft3 ---21’ 11” Length, 84” Height 1,069 ft3 --- 975 ft3 ---

22’ FARM HOPPER



96” Wide 102” Wide 96” Wide 102” Wide40’ 0” Length, 66” Height 1,588 ft3 --- 1,415 ft3 ---40’ 0” Length, 72” Height 1,735 ft3 1,854 ft3 1,560 ft3 1,667 ft3


40’ 0” Length, 84” Height --- 2,172 ft3 --- 1,985 ft3

40’ SUPER HOPPER






33’ 5” FARM HOPPERCAPACITIES CUBIC FEET





38’ FARM HOPPER



96” Wide 102” Wide 96” Wide 102” Wide40’ 0” Length, 66” Height 1,561 ft3 --- 1,415 ft3 ---40’ 0” Length, 72” Height 1,709 ft3 --- 1,563 ft3 ---

40’ SUPER HOPPER SL

50’ SPREAD-AXLE SUPER HOPPER



96” Wide 102” Wide 96” Wide 102” Wide42’ 2” Length, 66” Height 1,602 ft3 --- 1,453 ft3 ---42’ 2” Length, 72” Height 1,753 ft3 --- 1,601 ft3 ---

42’ 2” SUPER HOPPER SL



96” Wide 102” Wide 96” Wide 102” Wide48’ 0” Length, 66” Height 1,763 ft3 --- 1,580 ft3 ---

48’ 0” Length, 72” Height 1,933 ft3 --- 1,740 ft3 ---




50’ 0” Length, 66” Height 1,763 ft3 --- 1,580 ft3 ---





50’ TRI-AXLE SUPER HOPPER



96” Wide 102” Wide 96” Wide 102” Wide50’ 0” Length, 72” Height 1,924 ft3 --- 1,733 ft3 ---

50’ SUPER HOPPER SL








42’ 2” SUPER HOPPER









43’ SUPER CUBE

48’ SPREAD-AXLE SUPER HOPPER

48’ TRI-AXLE SUPER HOPPER

WWW.TIMPTE.COM

APPLICATION Recommended for transportation of agricultural and industrial bulk commodities

TIRES 11R24.5 Bridgestone R197 radials.

WHEELS 24.5 x 8.25 white steel disc painted, hub piloted

AXLES 22,500 lbs. beam capacity, 5 3/4” diameter, 7/16 (11 mm) wall, 71-1/2” or 77-1/2” track, 28-spline camshafts and “Q+” lining . Axles have Cam-Master “Q-style” quick-change brakes

OIL SEALS Stemco Guardian with Hubcaps

BRAKES 16-1/2” X 7’” complying with FMVSS 121

ANTI-LOCK SYSTEM Meritor / WABCO 4 sensor. 2 modulator with constant power sup-plied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121, S5.5

SUSPENSION Holland Air Ride Suspension, 17” ride height with 23,000 lbs. rating. Cast suspension beams

UPPER COUPLER Single I-Beam with 3/8” steel flanges, 1/4” steel pickup and coupler. 49” kingpin height

SUPPORT LEGS Square Legs, with roadside removable crank, low profile 10” square cushion foot shoe. 50,000 lbs. lift capacity. Located from kingpin: 77” on 22’; 88 5/8” on 28’6”; 93 5/8” on 36’; 94” on 35’ 5”, 38’ 40’, 42,2”, 43’; 98” on 48’; 110” on 50’

KING PIN SETTING 20”

FRONT CORNERS 6” radius, mill finish aluminum; SL Model 3”x4” rectangular tube, mill finish aluminum, 15 degree rearward slant assembly

NOSE PANELS Smooth pre-painted white .063” aluminum

SIDE LOWER RAILS Aluminum 7-11/16” high extrusion

SIDE POSTS Aluminum extrusion 1-3/4” Z posts on 12” centers

SIDE PANELS Pre-painted white .048” and .063” in coupler area aluminum corrugated on 4” centers

SIDE TOP RAILS Aluminum 5-5/8” x 6-1/4” extrusion

INTERIOR LINING SIDEWALLS

.048” one piece aluminum

DIVIDER PANEL .080” Aluminum

METAL COATING Black protective coating on all steel parts

WALL PROTECTORS Three (3) molded black plastic sidewall protectors

WHEEL FLAPS 1/2” black heavy duty rubber, 24”W x 30”L

TARP Standard Roll Tarp; 18 oz. all heat welded seams

TARP BOWS 9” rise galvanized steel arch type; Four (4) on 22’; Six (6) on 28’6”, 33’5”; Seven (7) on 36’, 38’, 40’; Eight (8) on 42’2”, 43’; Nine (9) on 48’, 50’

REAR FRAME Corrugated pre-painted white .048” aluminum panels and extruded posts: SL Model - Corrugated pre-painted white .048” aluminum and 3” x 4” rectangular tube , mill finish aluminum 15 degreee rearward slant assembly

END SLOPE .080” aluminum supported ‘Z’ shaped members; 33 degrees slope angle; SL Models - 33 degree front and rear slope angle. 31 degree rear slope on tri-axles model

TWIN HOPPER ASSEMBLY

22’, 28’6”, 33’5”, 36’ 38’; 96W or 102W on select models -two piece .125” aluminum formed tubs with 35.8 degrees side slopes and 33 degree end slopes, ag tub design40’, 42’2”; 96W - two piece .125 aluminum formed tubs with 43.5 degrees side slopes and 33 degrees end slopes, split tub design40’, 42’2”; 102”W / 43’ 96”W or 102”W / 48’,50’ 96”W or 102”W; trailer side panels of .080” aluminum with side slope angle of 43.5 degrees, center and end panels of .100” aluminum with slope angle of 33 degrees, riveted split tub design

TRAPS Trap plates are 1/4” aluminum with steel stiffeners supported by double sealed steel ball bearings22’ - 24”W x 36”L; Hopper Clearance 25”28’6”, 33’5” - 24”W x 22”L; Hopper Clearance 25” 36’, 38’ - 24”W x 27”L; Hopper Clearance 25”40’, 42’2” - 24”W x 36”L; Hopper Clearance 17”43’, 48’, 50’ - 26”W x 54”L Hopper Clearance 17”102” wide trailers add 6” to trap width

TRAP OPERATORS Each trap is opened and closed by a manually operated 1” diameter shaft connected through a U-joint to the double rack and pinion gears using a removable crank. There are trap locks at each crankshaft. The double rack and pinion gears drive at both sides of each trap plate

STEP, LADDER, & HAND-HOLD

Aluminum ladders, handholds, and platforms are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder

ELECTRICAL SYSTEM Complies with FMVS 108 with connector 7” offset to roadside on nose. All weather-pack automotive style connections are sealed to prevent water intrusion and corrosion. Common Ground

SIDE & NOSE MARKERSCLEARANCE & ID LAMPS

Side Lamps - Includes 2 rows of 3 lamps each side;(3) amber L.E.D., (2) red L.E.D., (1) amber L.E.D. mid turn/marker lamp.Nose Lamps - (2) High mounted amber L.E.D. lamps. Standard High Mounted Rear Frame Lamps - (5) red L.E.D. marker lamps on rear header

REAR TAIL LAMPS (6)-4” diameter, 7 diode L.E.D. lamps, grommet mounted. Two red turn signals and four red stop/tail and stop/clearance combination.

CONSPICUITY Red and white reflective tape mounted in line with bottom row of side marker lamps and full width across rear of trailer. White reflective tap mounted on top corners of rear frame

1827 Industrial DriveDavid City, NE 68632

(402) [email protected]


SINCE 1884

STANDARD SPECIFICATIONS

7/13

STANDARD SPECIFICATIONS - timpte.com€¦ · STAINLESS STEEL BLACK WHITE SILVER AG HOPPER STANDARD...

Documents

Transcript of STANDARD SPECIFICATIONS - timpte.com€¦ · STAINLESS STEEL BLACK WHITE SILVER AG HOPPER STANDARD...