Standard Metal Products Catalog - Dampers & Louvers
-
Upload
corey-gasman -
Category
Documents
-
view
229 -
download
1
description
Transcript of Standard Metal Products Catalog - Dampers & Louvers
Customer:__________________________________________________________
Contact:________________________________________Phone:______________
P.O. #__________________________________Date Needed:_________________
Job name:__________________________________________________________
QTY. Size Model TAG Unit Cost Total
Subtotal:
Tax:
Freight:
Total:
Special Instructions:
Invoice #
Job# By: Date:
Ship: Will Call:
P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
Specifications:Frame: 24 Ga. Galv.
Door: 6” to 12” 24 Ga. Galv.
14” to 24” 22 Ga. Galv.
Insulation: 1” Fiberglass
Cam Locks: Zinc Plated
6” thru 14” 2 cam locks
16” thru 24” 4 cam locks
Gasket: 1/8” x 1/2” Neoprene
Call for Information
Also Available: Stainless Steel Aluminum HingedCall for pricing
MODEL: AD Insulated Access Door
Yellow Label Access Doors
1
Stock Size Price Each
6 x 6 10.20
8 x 8 10.95
10 x 10 11.75
12 x 12 13.25
14 x 14 16.35
16 x 16 19.40
18 x 18 25.40
20 x 20 26.30
24 x 24 30.00
P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
Adds to Price List: Multipliers
Stainless Steel Call for Pricing
Aluminum Call for Pricing
Extra Blades $20.00 Each
Quadrants $4.00 each
All damper sizes are 1/4” smaller both ways
MODEL: OBN / PBN Opposed or Parallel Not Sealed
Dampers larger than 48 x 48 can be calculated by group of multiples.Jack Shafting available on dampers over 48”
Height in Inches 6-18 19-24 25-30 31-36 37-42 43-48
6-11 58.00 62.00 66.00 70.00 74.00 78.00
12-18 68.00 74.00 80.00 86.00 92.00 98.00
19-24 80.00 87.00 94.00 102.00 110.00 118.00
25-32 93.00 102.00 112.00 122.00 132.00 142.00
33-40 115.00 126.00 137.00 148.00 159.00 172.00
41-48 141.00 154.00 166.00 178.00 191.00 205.00
Blade Length - In Inches
Minimum Order $58
2 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
Adds to Price List: Multipliers
Stainless Steel Call for Pricing
Aluminum Call for Pricing
Extra Blades $20.00 Each
All damper sizes are 1/4” smaller both ways
MODEL: OBS / PBS Opposed or Parallel Sealed
3
Belimo Actuators in Stock for Immediate Shipment
Dampers larger than 48 x 48 can be calculated by group of multiples.Jack Shafting available on dampers over 48”
Height in Inches 6-18 19-24 25-30 31-36 37-42 43-48
6-11 70.00 75.00 80.00 85.00 90.00 95.00
12-18 83.00 90.00 97.00 105.00 112.00 120.00
19-24 97.00 107.00 117.00 128.00 139.00 150.00
25-32 115.00 128.00 141.00 154.00 167.00 179.00
33-40 142.00 155.00 168.00 182.00 196.00 210.00
41-48 170.00 185.00 200.00 216.00 232.00 250.00
Blade Length - In Inches
P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
Minimum Order $70
MODEL: SLB Standard Louver Box Frame
SLF Standard Louver Flange Frame
Galvanized (Standard) or Paint Grip Minimum Price $75/each Box (SLB) 4” Standard Louver. $27.00/sq ft.Flange (SLF) 4” Standard Louver - 1” Flange Standard $30.00/sq ft. (12” tall & under mfg. in 2” deep frame)2” Box Frame $38.00/sq ft.2” Flange Frame $40.00/sq ft.6” Box Frame $30.00/sq ft.6” Flange Frame $32.00/sq ft.
Aluminum or Color-Clad Aluminum Minimum Price $85 /each Box (SLBA or SLBU) 4” Standard Louver. $34.00/sq ft.Flange (SLFA or SLFU) 4” Standard Louver $35.00/sq ft. (12” tall & under mfg. in 2” deep frame)2” Box Frame $42.00/sq ft.2” Flange Frame $43.00/sq ft.6” Box Frame $37.00/sq ft.6” Flange Frame $38.00/sq ft.Note: All pricing is figured on length times height rounded to the next full inch. All Louvers are 1/4” smaller both ways.
4 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
MODEL: BDD Backdraft Damper
Back Draft Damper base price per sq. ft. $27.00
High Volume Back Draft Damper base price per sq. ft. $34.00
Add per unit for spring Loaded or Counter Balanced $15.00
Flanged Model per sq. ft. $32.00
Note: All sq. ft. pricing is figured on length times height rounded to the next full inch.
All Back Draft Dampers larger than 36 x 36 will be sectioned.
All Dampers are 1/4” smaller both ways. Minimum Price $75/each
5P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
MODEL: SBD Rectangular Single Blade Dampers
MODEL: RBD Round Back Draft Damper
Quadrants $4.00 each
Per Sq. In. (length x width) .09¢ ($13.00 min)
Specifications: 16 Ga. Galvanized Blade 1/2” Round Plated CRS Rod
8” - 10” RD $75.00
12” - 14” RD $85.00
16” - 20” RD $110.00
22” - 24” RD $140.00
26” - 30” RD $175.00
32” - 36” RD $220.00
6 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
MODEL: RSBN Round Single Blade Dampers
MODEL: ROBN Round Opposed Blade Damper
ROBN Non-Sealed Prices
18” - 20” RD $150.00
22” - 30” RD $200.00
32” - 40” RD $250.00
42” - 48” RD $350.00
ROBS Sealed Prices
18” - 20” RD $195.00
22” - 30” RD $260.00
32” - 40” RD $325.00
42” - 48” RD $450.00
6” - 14” RD $60.00
16” - 20” RD $70.00
6” - 14” RD $75.00
16” - 20” RD $90.00
7P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
RSBN Round Single Blade Non-Sealed RSBS Round Single Blade Sealed
ROBN Round Opposed Blade Non-Sealed Damper
Standoff Quadrants $1 2 /each
Standoff Quadrants $1 2 /each
MODEL: RC Roof Curb
SMP Part # F SQ. V SQ. Roof Opening Cost
RC16 16 20 13 $130
RC 18 18 22 15 $145
RC 20 20 24 17 $160
RC 22 22 26 19 $175
RC 24 24 28 21 $190
RC 26 26 30 23 $205
RC 28 28 32 25 $225
RC 30 30 34 27 $250
RC 32 32 36 29 $270
RC 34 34 38 31 $285
RC 36 36 40 33 $300
Standard Construction Features
• 16 gauge galvanized steel
• 1-1/2”, 3 lbs. Density thermal and acoustical insulation
• Continuously welded corners
• Wood Nailer
Options
• Damper tray
• No Wood Nailer (deduct 1-1/2” for actual height)
Sizes that increase or decrease available.
Other sizes available.
Wood Nailer
Roof Opening
V Sq.
F Sq.
Insulation
1 1/2”
17 1/2”
2” Flange
8 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
9P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
Cap
Base Plate 2” Flange
2 x 4 Wood Nailer
Base Plate
2 x 4 Wood Nailer
5” Cap
2” 3 1/2” 2”
Our Curb Support Rails unique design offers a high load bearing capacity. Manufactured in welded 18ga galvanized steel sections that are continuously welded together. This design offers optimum internal reinforcement every 24”. The full Manufactured section is then welded to the 18ga base plate. A continuous 2 x 4 wood nailer is attached to the top along with the removable counter flashing. The flashing provides an effective method of attaching roofing felts and assuring a water tight application. Standard sizes are 2’, 4’, 6’, 8’ and 10’ lengths.
Standard Construction• 18 ga Galvanized Welded Steel Construction• 16” Height• 2 x 4 Wood Nailer• Counter Flashing Cover• Internal Reinforcement every 24”
Options• Height Change• Heavier Gauge• Wider Wood Nailer• Insulated
Under 100’ 100’ - 248’ 250’ - 398’ 400’ +
2’ Length $90.00
4’ Length $180.00
6’ Length $270.00
8’ Length $360.00
10’ Length $450.00
CSR Curb Support Rails
MODEL: CSR Curb Support Rail
Call For Pricing
BladeCenters
3”
BladeCenters
3”
Model: OBS
Model: PBS
10 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
11P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
BladeCenters
3”
BladeCenters
3”
Model: BD
Model: HVBD
12 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360
13P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360