STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after...

28
STANDARD PROGRAM LIFT

Transcript of STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after...

Page 1: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

STANDARD

PROGRAMLIFT

Page 2: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal
Page 3: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

MLC electronic d.o.o. has been settled in 1997 as a producer of electrical equipment for elevators.

Production is based on our own development of microprocessor control systems.

In 2005 the production was expanded with mechanical components. Since that time we provide a complete

solutions for elevators in a wide pallete of possibilities for new lifts, as well as for reconstructions. Our solutions are

custiomized for the client and energeticly efficient.

Until now there is over 15 000 control systems and over 1200 complete operational systems worldwide.

ABOUTUS

INTRODUCTION

3

Page 4: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

4

LC100 is module microprocessor control system for elevators vith CAN Bus communication.

It is possible to control up to 8 elevators in Multiplex mode, every up to 40 stations driving up to 3.0 m/s. Communication between modules is established with robust CAN Bus with latest designed CAN communication technology and developed with low current usage components.

The system is produced with Surface Mount Technology. All modules must pass all quality tests: Electrical testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group.

Basic properties:Universal application for all plant types with all adjustable user-specific parameters and possibilities of monitoring with mobile LCD terminal, through PC or Internet. Connection is possible with every plate on CAN Bus, also on cabin operation panel and landing displays.

Different door operators with differentiation the A and B side at all calls, short station gaps, door opening, more leveling types, 4 fire zones, filling and emptying the buildings, priority drive.

Different call processing with center of gravity and energy saving. Cabin and pit lighting and ventilation with energy saving system.

Different positioning systems including absolute positioning.

Integrated charge measurement.

Plug & play connector between moduls: landing calls, display, cabin operation panel, charge measurement, inverter, service box, service box for pit, exterior door. Universal pre-wired hanging cable for all plants. All connections in the pit are pre-wired.

Possible connection with CAN OPEN or CAN OPEN LIFT components.

Different display parameteres including displays for every station.

Over 100 parametrical timers for different applications.

Real time error memory. Different drive and call counters.

Small dimensions for 120 mm wide cabinet, suitable for MRL elevators.

The system fulfills following standards:EN 81-1:1998+A3:2009, EN 81-2:1998+A3:2009, EN 12015, EN 12016, EN 55011, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11

LC100SYSTEM

CONTROL

Page 5: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

5

CONTROL

Page 6: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

6

CABELLC100MRL 120

LC100SYSTEM

CONTROL

Page 7: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

7

LC100MRL400

LC100MRL650

LC100SYSTEM

CONTROL

Page 8: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

8

CA

BIN

OPE

RATI

ON

PA

NEL

CO

NTR

OL

LC100SYSTEM

CONTROL

Page 9: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

9

LC100SYSTEM

POSITIONING SySTEM AND ACCESSORIES

PRE-WIRING THE LANDING CALLS

PRE-WIRING THE SAFETy CIRCUIT

CONTROL

Page 10: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

CABIN OPERATION PANEL

L-1 (Wall-mounted) L-2 (Wall-mounted) L-3 (Standard)

10

L-D (Special version)

CONTROL AND DISPLAY

Page 11: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

LANDINGCALLS

SP-1 is with TFT Display.

SP-2 is with DOT MATRIX Display.

DISPLAY PANELS

P-4

P-1

P-5

P-2

SP-1 (Standard)

SP-2 (Wall-mounted)

P-6

P-3

P-7

11

WALLMOUNTED

STANDARD

CONTROL AND DISPLAY

Page 12: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

12

DISPLAY

M6-R

M5-R

M7-R

M8-R

TFT-LTFT-M

M8-B M8-W

M7-B M7-W

M6-B

M5-B

M6-W

M5-W

DOT

TFT

2 x 7 SEGMENT

DOTMATRIX

CONTROL AND DISPLAY

Page 13: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

13

CONTROL

LC100-C

LC100-K

LC100-Z

LC100-S

LC100MODULESLC100-C

is a central control system plate of an LC100 system

LC100-K board is used as an input/output unit for elevator cabin

LC100-Z board is used for connecting the cabin safety circuit, door power, door managment and alarm pushbutton

safety board is used to connect elements of a safety circuit, drive shaft light, traveling cable voice announcement

Page 14: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

14

LC100-H

LC100-J

LC100-F

LC100-E2

LC100-RLC100-T

LC100-H board is used to multiply CAN

connectors, it consists of 4 CAN conectors

LC100-J board is used as additional input/output board with 8 in/out and

two CAN connectors

LC100-F board is input-output board

with 16 input/output pins for the upgrade

the LC100-K or LC100-E

LC100-E2 board is input-output board

with 16 input/output pins

LC100-T is a relay board with 8 relays

LC100-R is a relay board with 4 relays

LC100MODULES

CONTROL

Page 15: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

15

LC100-PL

LC100-K2

LC100-VFD

LC100-SR

LC100-PLbattery charger

LC100-K2 is an input/output unit for the cabin

LC100-VFD control board

LC100-SR is a connection board for the safety circuit

LC100MODULES

CONTROL

Page 16: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

16

LC100-A

LC100-LLLC100-V

LC100-W2LC100-y

LC100-V2LC100-I

LC100-A board is used for absolute positioning system

LC100-V board is used to connect the load measurement

cells as en extention for LC100-K

LC100-LL board is ultrasound extention for positioning system

with ultrasound sensors

LC100-I is input-output board with 4 relays

and 8 inputs/outputs

LC100-V2 load measurement unit

LC100-y control board

LC100-W2voice announcement

LC100MODULES

CONTROL

Page 17: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

17

LC100-G

LC100-B

LC100-D LC100 monitoring system

LC100-G is a communication board for connection with PC for monitoring system

LC100-B CAN/CAN bridge board

LC100-D control unit

LC100MODULES

CONTROL

Page 18: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

L IFT CARS

18

M100Client can choose:

• Liningthewalls

• Handrail

• Ceiling

• ColorofthePVCfloorings

In the picture is an example with:

• Walls:stainlesssteellining

• CeilingwithLED-2

• PVCfloorings:AltroWalkwayDolphin

• Handrail:R-1

Page 19: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

19

LIFT CARS

M200Client can choose:

•Liningthewalls

•Woodflooring

•Handrail

•Ceiling

•ColorofthePVCfloorings

In the picutre is an example with:

•Walls: stainless steel with wooden lining: h3006 st22

•CeilingS-3withLED-1

•PVCfloorings:AltroImpressionistIITranquil

•Handrail:R-1

Page 20: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

L IFT CARS

M300

20

Client can choose:

• Liningthewalls

• Woodlining

• Handrail

• Ceiling

• ColorofthePVCfloorings

In the picutre is an example with:

• Walls: polished stainless steel with wooden lining: h1330 st9

• CeilingwithFluolighting

• Granitefloor

• Handrail:R-2

Page 21: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

L IFT CARS

M400

21

Client can choose:

•Liningthewalls

•Positionoftheglass

•Handrail

•Ceiling

•ColorofthePVCfloorings

In the picture is an example with:

•Walls:stainlesssteel

•CeilingC-1withFluolighting

•PVCfloorings:AltroDesignerRosa

•Handrail:R-1

•Positionoftheglass:rearside

PANORAMIC

Page 22: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

L IFT CARS

M500

22

Client can choose:

• Liningthewalls

• Woodenlining

• Positionoftheglass

• Handrail

• Ceiling

• ColorofthePVCfloorings

In the picture is an example with:

• Walls: stainless steel with wooden lining h3304 st9

• Ceiling:S-3withLED-1

• PVCfloorings:AltroWalkwayDolphin

• Handrail:R-1

• Positionoftheglass:rearside

PANORAMIC

Page 23: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

L IFT CARS

M600

23

According to customer’s request we provide

customized cars.

In the picture is an example from panoramic elevator (glass car)

•Ontherearsideisaroundglass

• Material of the frames for glasses is stainless steel - polished

•CeilingwithLED-1

•PVCfloorings:AltroWalkwayDolphin

CUSTOM PANORAMIC

Page 24: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

INTERIOR ELEMENTS

All wooden linings

are made of high quality

laminated lining boards.

Thicknessofallliningsis10mm.

h1330 st9

h1530 st15

h3304 st9

u326 st15

w980 st2

h1277 st9

h1428 st22

h3006 st22

u156 st15

u999 st3

f509 st2

h1424 st22

h3005 st22

h3363 st9

u630 st15

24

WALL LININGWOOD

Page 25: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

INTERIOR ELEMENTS

Material:

AISI 304 & AISI 430

Thickness:2,5mm

All handrails are made

of polished stainless steel

sm-cloth

AltroWalkwayDolphin

R-3

sm-leather

Altro Impressionist IITranquil

R-2

Polished

sm-karo

Altro Designer Rosa

R-1

R-4

Corn 240 (brushed)

25

WALL LINING

INOX

FLOORLINING

HANDRAILS

Page 26: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

LED

FLUO

S-1

C-1

S-2

C-2

C-4

LED-1LED-3

S-3

C-3

C-5

LED-2

26

INTERIOR ELEMENTS

CEILING PANELS

CAR LIGHTS

Page 27: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

OUR PARTNERS

DRAKO

PARTNERS

Page 28: STANDARD LIFT - mlc.hr testing of the circuit boards before mounting, functioning test after production, temperature test and load test for every group. Basic properties: Universal

MLC ELECTRONIC d.o.o.

Puškarićeva104b|10250Lučko|Croatia|T.+38516548085|F.+38516548086|[email protected]|www.mlc.hr