Standard Equipment Optional Equipment - portergroup.co.nz Hyundai models/Excavators/R250LC-7.pdf ·...

10
250LC - 7 / 250NLC - 7 *Photo may include optional equipment. CRAWLER EXCAVATOR Applied Tier 2 Engine Standard Equipment Optional Equipment ISO standard cab All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window Lockable door Hot & cool box Accessory box & Ash-tray Computer Aided Power Optimization (New CAPO) system 2-power mode, 3-work mode, 2-user mode Auto deceleration & one touch deceleration system Auto warm up system Auto overheat prevention system Heater & Defroster (7,500kcal/hr, 30,000BTU/hr) Self diagnostic system Starting Aid (air grid heater), cold weather Centralized monitoring LCD display Engine speed Clock & Error code Gauges Fuel level gauge Engine coolant temperature gauge Hyd. oil temperature gauge Warning Fuel level Check Engine & CPU Engine oil pressure Engine coolant temperature Hyd. oil temperature Low battery Air cleaner clogging Indicator Power max Preheat & Engine warming-up One touch decel Door and cab locks, one key AM/FM radio and cassette Radio remote switch Two outside rearview mirrors Fully adjustable suspension seat with seat belt Slidable joystic, pilot-operated Console box tilting system(LH.) Three front working lights Electric horn Batteries (2 x 12V x 100 AH) Battery master switch Removable clean out screen for Hyd. oil cooler Automatic swing brake Removable reservoir tank Fuel pre-filter Boom holding system Arm holding system Counterweight (4600 kg, 10140 lb) Mono boom (5.85 m, 192) Arm (3.05 m, 100) Track shoes (600 mm, 24) Track rail guard Fuel warmer Air-conditioner (5000 kcal/hr, 20000 BTU/hr) FATC(Full Automatic Temperature Control) Sun visor for cabin inside Fuel filler pump (35 /min, 9.5 USgpm) Beacon lamp Safety lock valve for boom cylinder with overload warning device Safety lock valve for arm cylinder Single acting piping kit (breaker, etc) Double acting piping kit (cramshell, etc) Accumulator, work equipment lowering 12 volt power outlet (24V DC to 12V DC converter) Electric transducer CD Player Travel alarm Various optional Arms Super short arm (2.10m, 6’ 11”) Short arm (2.50m, 8’ 2”) Long arm (3.60m, 11’ 10”) Various optional Buckets (SAE heaped) Standard bucket (1.08 m 3 , 1.41 yd 3 ) Narrow bucket (0.60 m 3 , 0.78 yd 3 ) Narrow bucket (0.79 m 3 , 1.03 yd 3 ) Narrow bucket (1.03 m 3 , 1.35 yd 3 ) Light duty bucket (1.50 m 3 , 1.96 yd 3 ) Heavy duty bucket (1.07 m 3 , 1.40 yd 3 ) Heavy duty bucket (1.15 m 3 , 1.50 yd 3 ) Heavy duty bucket (1.27 m 3 , 1.66 yd 3 ) Heavy duty bucket (1.46 m 3 , 1.91 yd 3 ) Rock-Heavy duty bucket (1.16 m 3 , 1.52 yd 3 ) Cabin FOPS/FOG(ISO/DIS 10262) Cabin Roof-cover Transparent type Cabin lights Engine emergency control cable Track shoes Triple grousers shoe (700mm, 28” ) Triple grousers shoe (800mm, 32” ) Triple grousers shoe (900mm, 36” ) Lower frame under cover Tool kit Operator suit Special cowl Air vent type side door Low noise kit Engine emergency control cable Pre-heating system Seat Adjustable air suspension seat Adjustable air suspension seat with heater Mechanical suspension seat with heater Pattern change valve (2 patterns) Robex 250LC-7 PLEASE CONTACT www.hyundai-ce.com 2009. 09 Rev.6 Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards. All imperial measurements rounded off to the nearest pound or inch.

Transcript of Standard Equipment Optional Equipment - portergroup.co.nz Hyundai models/Excavators/R250LC-7.pdf ·...

250LC-7 / 250NLC-7

*Photo may include optional equipment.

CRAWLER EXCAVATOR Applied Tier 2 Engine

Standard Equipment Optional Equipment

ISO standard cabAll-weather steel cab with all-around visibilitySafety glass windowsRise-up type windshield wiperSliding fold-in front windowSliding side windowLockable doorHot & cool boxAccessory box & Ash-tray

Computer Aided Power Optimization(New CAPO) system

2-power mode, 3-work mode, 2-user modeAuto deceleration & one touch deceleration systemAuto warm up systemAuto overheat prevention system

Heater & Defroster (7,500kcal/hr, 30,000BTU/hr)Self diagnostic systemStarting Aid (air grid heater), cold weatherCentralized monitoring

LCD displayEngine speedClock & Error code

GaugesFuel level gaugeEngine coolant temperature gaugeHyd. oil temperature gauge

WarningFuel levelCheck Engine & CPUEngine oil pressureEngine coolant temperatureHyd. oil temperature Low batteryAir cleaner clogging

IndicatorPower maxPreheat & Engine warming-upOne touch decel

Door and cab locks, one keyAM/FM radio and cassette

Radio remote switchTwo outside rearview mirrorsFully adjustable suspension seat with seat beltSlidable joystic, pilot-operatedConsole box tilting system(LH.)Three front working lightsElectric hornBatteries (2 x 12V x 100 AH)Battery master switchRemovable clean out screen for Hyd. oil coolerAutomatic swing brakeRemovable reservoir tankFuel pre-filterBoom holding systemArm holding systemCounterweight (4600 kg, 10140 lb)Mono boom (5.85 m, 19’ 2”)Arm (3.05 m, 10’ 0”)Track shoes (600 mm, 24”)Track rail guardFuel warmer

Air-conditioner (5000 kcal/hr, 20000 BTU/hr)FATC(Full Automatic Temperature Control)Sun visor for cabin insideFuel filler pump (35 /min, 9.5 USgpm)Beacon lampSafety lock valve for boom cylinderwith overload warning deviceSafety lock valve for arm cylinderSingle acting piping kit (breaker, etc)Double acting piping kit (cramshell, etc)Accumulator, work equipment lowering12 volt power outlet (24V DC to 12V DC converter)Electric transducerCD PlayerTravel alarmVarious optional Arms

Super short arm (2.10m, 6’ 11”)Short arm (2.50m, 8’ 2”)Long arm (3.60m, 11’ 10”)

Various optional Buckets (SAE heaped)Standard bucket (1.08 m3, 1.41 yd3)Narrow bucket (0.60 m3, 0.78 yd3)Narrow bucket (0.79 m3, 1.03 yd3)Narrow bucket (1.03 m3, 1.35 yd3)Light duty bucket (1.50 m3, 1.96 yd3)Heavy duty bucket (1.07 m3, 1.40 yd3)Heavy duty bucket (1.15 m3, 1.50 yd3)Heavy duty bucket (1.27 m3, 1.66 yd3)Heavy duty bucket (1.46 m3, 1.91 yd3)Rock-Heavy duty bucket (1.16 m3, 1.52 yd3)

Cabin FOPS/FOG(ISO/DIS 10262)Cabin Roof-cover Transparent typeCabin lightsEngine emergency control cableTrack shoes

Triple grousers shoe (700mm, 28” )Triple grousers shoe (800mm, 32” )Triple grousers shoe (900mm, 36” )

Lower frame under coverTool kitOperator suitSpecial cowl

Air vent type side door

Low noise kitEngine emergency control cablePre-heating systemSeat

Adjustable air suspension seatAdjustable air suspension seat with heaterMechanical suspension seat with heater

Pattern change valve (2 patterns)

Robex 250LC-7

PLEASE CONTACT

www.hyundai-ce.com 2009. 09 Rev.6

Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards.All imperial measurements rounded off to the nearest pound or inch.

A new chapter in construction equipment has now begun.Making the dream a reality.

Built for Maximum Power, Performance, Reliability.Built for Maximum Power, Performance, Reliability.

NEW 7 SERIES Robex 250LC-7

HYUNDAI CONSTRUCTION EQUIPMENT 02 / 03

*Photo may include optional equipment.

A new chapter in construction equipment has now begun.Making the dream a reality.

Technology in Cab Design

Operator’s Comfort is Foremost.Wide Cab Exceeds Industry Standards.

VisibilityEven more visibility than before, for safer, more efficient operating.

Excellent VentilationVentilation has been improved by the addition of the larger fresh air intake system,

and by providing additional air flow throughout the cab.

Sliding front and side windows provide improved ventilation.

A large sunroof offers upward visibility and additional ventilation.

Comfortable Operator EnvironmentThe control levers and seat can be adjusted to provide maximum operator comfort.

The seat is fully adjustable for optimum operating position, reducing operator

fatigue.

Console boxes slide forward and backward for improved accessibility.

The proportional pressure controls reduce unnecessary exertion while ensuring

precise operation.

Large windows allow excellent visibility in all directions.

Low noise designThe Robex 7 series was designed with low operation noise in mind.

Hyundai engineering helps to keep interior and exterior noise levels to a minimum.

The cab's noise levels have been additionally reduced by improving the door seals

for the cab and engine compartments.

An insulated diesel engine compartment with sound-damping material also reduces

noise.

TECHNOLOGY IN CAB DESIGN 04 / 05

123

Wide, Comfortable Operating Space Steel Cover Sunroof Dial Type Engine Speed Switch and Key Switch

NEW 7 SERIES Robex 250LC-7

Operating Environment OPERATING ENVIRONMENT 06 / 07

Minimization of Shock and Vibrationthrough Cab Mounting SystemThe application of Viscous Mounting to the cabinsupport provides the operator with a muchimproved ride. The operator work efficiency will increase as theshock and noise level in the cabin decreases.

Hot & Cool BoxThe New Cab has even more space for theoperator. An Additional storage box islocated behind operators seat, and it keepsfood and beverages cool or hot.

Rear Emergency Exit WindowRear Exit Window is designed with easy

exit foroperator's safety.

Highly Sensitive Joystick andEasy EntranceNew joystick grips for precise controlhave been equiped with double switches.

(Left: Power boost / One touchdeceleration, Right: Horn/Optional)

Wide, Comfortable Operating SpaceAll the controls are designed and positioned according to the latest ergonomicresearch.Reinforced pillars have also been added for greater cab rigidity.

Smooth Travel Pedal and Foot Rests

Improved Intelligent DisplayInstrument Panel is installed in front ofRH console box. It is easy to check all critical systemswith easy-to-read indicators.

Easy-to-Reach Control PanelsSwitches and other essential controlsare located near the operator. This helps keep operator movement to aminimum, enhancing control with lessoperator fatigue.

Wide Cab with Excellent VisibilityThe cab is roomy and ergonomicallydesigned with low noise level and goodvisibility.A full view front window and large rearand side windows provide excellentvisibility in all directions.

Remote Radio Control andDeluxe Cassette

Rise-up Wiper and Cabin LightsRaise-up wiper has enhanced for thebetter front view. Cabin Lights enhancessafety by brightly lighting thesurroundings during night work(optional)

NEW 7 SERIES Robex 250LC-7

Centralized control panelHorn buttonOption buttonRemote Radio control

Travel leverClusterOne touch decel buttonHour meter

Travel pedalFully adjustable suspension seatSafety leverPower boost button

Joystick control leverAir Conditioner and Heater controller

The best working conditions in a pleasant environment.

CAB

CAB

NEW 7 SERIES Robex 250LC-7

Powerful and Precise Swing ControlImproved shock absorbingcharacteristics make stopping aprecise and smooth action

Advanced Hydraulic System

ADVANCED CAPO SYSTEM

Advanced CAPO SystemThe Advanced CAPO(Computer Aided PowerOptimization) system maintains engine andmutual pump power at optimum levels. Modeselections are designed for various workloads and maintaining high performancewhile reducing fuel consumption. Features such as auto deceleration andpower boost are included in the system. The system monitors engine speed, coolanttemperature, and hydraulic oil temperature.Contained within the system are selfdiagnostic capabilities which are displayed byerror codes on the cluster.

Self Diagnosis SystemThe CPU controller diagnoses problems in theCAPO system caused by electric andhydraulic malfunctions and displays them onthe LCD monitor of the cluster by error codes.This controller has the capacity to identify 48distinct types of errors. As the informationfrom this device, such as engine rpm, mainpump delivery pressure, battery voltage, hyd.temperature, and the state of all types ofelectric switches, provides the operator witha much more exact state of machineoperating condition. This makes the machine easier to troubleshoot when anything does go wrong.

Arm Flow Regeneration SystemArm flow regeneration valve provides smootharm-in operation without cavitation.

Boom & Arm Holding System The Holding valves in the main control valveprevents the boom & arm from dropping overan extended period in neutral position.

Auto Deceleration SystemWhen remote-control valves are in neutralposition more than 4 seconds, CPU controllerreduces engine speed to 1200rpm. This decreases fuel consumption andreduced cab noise levels.

One Touch Decel SystemWhen the one touch decel switch is pressed,CPU controller controls the accel actuator toreduce engine speed to low idle. And then theone touch decel switch is pressed again, theengine speed recovers.

Max. Flow Cut-off SystemFor precise control and finishing work, theMax. Flow Cut-off System reduces pump flow,thus allowing smooth operation.

Automatic Engine Overheat PreventionIf the engine coolant temperature gets toohigh, the CPU controller lowers the enginespeed and cools the engine.

Anti Restart SystemThe new system protects the starter fromrestarting during engine operation, even if theoperator accidentally turns the start key again.

Power boost control SystemWhen the power boost system is activated,digging power increases about 10%. It isespecially useful when extra power istemporarily needed, for instance, whendigging hard earth and rock, or if the bucketteeth are stopped by a stubborn tree root.

Automatic Warming-up SystemAfter the engine is started, if the enginecoolant temperature is low, the CPU controllerincreases the engine speed and automaticallyto warm up the engine more effectively.

Pump Flow Control SystemIn neutral position: Pump flow is reduced to aminimum to eliminate power loss. In operation: Maximum pump flow is deliveredto the actuator to increase the speed. Withmovement of the control lever, pump flow isautomatically adjusted and the actuator speedcan be proportionally controlled.

Hydraulic Damper in Travel PedalImproved travel control ability & feeling byshock reducing when starting and stopping.

POWER MODEH mode: High power S mode: Standard powerWORK MODE

: Heavy duty work: General work: Breaker

USER MODEM mode: Maximum PowerU mode: Memorizing Operator’s Preferable Power Setting

NEW MODE CONTROL SYSTEM

CUMMINS B5.9-C ENGINEThe six cylinders, turbo-charged, 4 cycle,charger air cooled engine is built for power,reliability, economy and low emissions.

A More Reliable Way To ReachYour Dream.The Cummins B5.9-C engine has beendesigned with 40% fewer parts than thecompetition. That means there's less that cango wrong when you need it most. It alsomeans fewer parts to inventory. Repairs aresimplified because no special tools areneeded for maintenance. The weight of themachine is reduced without sacrificingstrength.The B5.9-C engine is capable of reachingemission standards without electronic enginecontrols. You get a proven power plant thatmeets ecological concerns, without paying apremium for technology you don’t need.

08 / 09Increased Higher Performance

Track Rail Guide & AdjustersDurable track rail guides keep track links in place. Track adjustment is made easy with standardgrease cylinder track adjusters and shock absorbing springs.

Strong and Stable Lower FrameReinforced box-section frame is all welded, low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground andworking on wet sites through high tensile strength steel panels, with highly durable upper andlower rollers and track guards.Long undercarriage incoporates heavy duty excavator style components.X-leg type center frame is integrally welded for maximum strength and durability.

Reinforced Bucket and BucketLinkageSealed and adjustable bucket linkage providesless wear of pins and bushes as well as silent operation.The design includesbucket link durability and anti wearcharacteristics. Additional reinforcementplates on cutting edge section. Reinforcedbucket is made with thicker steel andadditional lateral plate.

RELIABILITY & SERVICEABILITY 10 / 11Reliability & Serviceability

NEW 7 SERIES Robex 250LC-7

Centralized Electric Control Box and Easy Change AirCleaner AssemblyElectric control box and Air cleaner are centralized in one or the same compartment for easy service.

Highly efficient Hydraulic PumpA pilot pump has been installed resulting in improvedcontrol sensitivity.

Large tool box for extra storageDurability of structure proven throughFEM(Finite Element Method) analysisand long term durability test.

Full open doors and master key system provide easy access for servicing.Handrails and foot steps are applied for safety

Side Cover with Left & Right Swing Open TypeEasy access to vital components gives unrestricted view ofcomponent allows easy maintenance and repair.

Easy to maintain engine componentsThe cooling and preheating system are provided foroptimum and immediate operation, guaranteeing longer lifefor the engine and hydraulic components.Servicing of the engine and hydraulics is considerablysimplified due to total accessibility.

*Photo may include optional equipment.

12 / 13Specifications Backhoe attachment

Engine

Watercooled, 4 cycle Diesel,6-Cylindersin line, direct injection,Turbo charged,charger air cooled, low emission

Type

J1995 (gross) 173 HP (129 kW) at 2000 rpm163 HP (121 kW) at 2000 rpm175 PS (129 kW) at 2000 rpm165 PS (121 kW) at 2000 rpm72.2 kgf.m(522 lbf.ft) at 1500 rpm102 x 120 mm (4” x 4.7”)5,880 cc (359 cu in)

Max. torqueBore strokePistonBatteriesStarting motorAlternator

2 x 12 V x 100 AH24 V, 4.5kW24 V, 50 Amp

J1349 (net)6271/1 (gross)

6271/1 (net)

SAERatedflywheelhorsepower DIN

Buckets

Arms

Digging force

Model

Main pump

Hydraulic motors

Relief valve setting

Hydraulic cylinders

TypeMax. flowSub-pump for pilot circuit

Two variable displacement piston pumps2 224 /min (59.2 US gpm / 49.3 UK gpm)Gear pump

Cummins B5.9-C

Swing system

Swing motorSwing reductionSwing bearing lubricationSwing brakeSwing speed

Axial piston motorPlanetary gear reductionGrease-bathedMulti wet disc12.6 rpm

Coolant & Lubricant capacity

Undercarriage

Operating weight (approximate)

(refilling)Fuel tankEngine coolant Engine oilSwing deviceFinal drive(each)Hydraulic system(including tank)Hydraulic tank

liter34035246

3.3300190

US gal89.89.26.31.60.87

79.350.2

UK gal74.87.75.31.30.73

66.041.8

Center frameTrack frameNo. of shoes on each sideNo. of carrier roller on each sideNo. of track roller on each sideNo. of track guard on each side

600 (24)

R250LC-7

R250LC-7 H/C

R250LC-7R250LC-7 H/C

R250LC-7R250LC-7 H/C

R250LC-7R250NLC-7R250LC-7 H/C

25,200(55,600)25,100(55,300)27,450(60,520)

0.51(7.25)0.51(7.25)0.53(7.54)

28,620(63,100) 0.46(6.54)

0.39(5.55)0.41(5.83)0.35(4.98)

0.44(6.26)0.46(6.54)

25,800(56,900)28,400(62,610)26,100(57,500)

25,500(56,200)28,020(61,770)

700 (28)

800 (32)

900 (36)

710 (28)

ShoesType

Doublegrouser

Triplegrouser

Width mm(in) kg(lb) kgf / cm2(psi)Operating weight Ground pressure

X - leg typePentagonal box type51292

Drives & Brakes

Drive methodDrive motorReduction systemMax. drawbar pullMax. travel speed(high) / (low)GradeabilityParking brake

Pilot pressure operated joysticks and pedals with detachable leverprovide almost effortless and fatigueless operation.

X-leg type center frame is integrally welded with reinforced boxsectiontrack frames. The undercarriage includes lubricated rollers,idlers, track adjusters with shock absorbing spring and sprocket,assembled trak chain with triple grouser shoes.

Operating weight

Operating weight, including 5850mm (19’ 2”) boom, 3050m (10’ 0”) arm,SAE heaped 1.08m3 (1.41 yd3) backhoe bucket, lubricant, coolant, full fueltank, hydraulic tank and the standard equipment.

Hydraulic system

Two speed axial piston motorwith brake valve and parking brake

Axial piston motor with automatic brake

330 kgf/cm2 (4690 psi)330 kgf/cm2 (4690 psi)360 kgf/cm2 (5120 psi)275 kgf/cm2 (3910 psi)35 kgf/cm2 (500 psi)Installed

Boom : 2-140 1345 mm (5.5” 52.9”)Arm : 1-150 1620 mm (5.9” 63.8”)Bucket : 1-135 1185 mm (5.3” 46.7”)

Cross-sensing and fuel saving pump system

Travel

Swing

Implement circuitsTravelPower boost (boom, arm, bucket)Swing circuitPilot circuitService valve

No. of cylinder-bore stroke

Fully hydrostatic typeAxial piston motor, in-shoe designPlanetary reduction gear21600 kgf (47600 lbf)5.5 km/hr (3.4 mph) / 3.5 km/hr (2.2 mph)35 (70 %)Multi wet disc

Traveling and steeringEngine throttleExternal Lights

Pilot control Two joysticks with one safety lever(LH): Swing and arm, (RH): Boom and bucket(ISO)

Two levers with pedalsElectric, Dial typeTwo lights mounted on the boom one under the battery box

Control

Standard equipment

UpperstructureCounterweightBoom (with Arm cylinder)

5520 kg (12170 lb)4600 kg (10140 lb)2280 kg (5030 lb)

SAE heaped CECE heaped Without side cutters

With side cutters

Recommendation mm(ft.in)5850 (19’ 2”)

2500(8’ 2”)

2100(6’ 11”)

3050(10’ 0”)

3600(11’ 10”)

Capacity m3 (yd3) Width mm (in)Weight kg(lb)

Boom

Arm

0.60 (0.78)0.79 (1.03)1.03 (1.35)1.08 (1.41)1.50 (1.96)1.07 (1.40)1.15 (1.50)1.27 (1.66)1.46 (1.91)1.16 (1.52)

0.55 (0.72)0.70 (0.92)0.90 (1.18)0.95 (1.24)1.30 (1.70)0.95 (1.24)1.00 (1.31)1.10 (1.44)1.28 (1.67)1.00 (1.31)

760 (29.9)890 (35.0)1090 (42.9)1130 (44.5)1490 (58.7)1150 (45.3)1210 (47.6)1310 (51.6)1460 (57.5)1340 (52.8)

880 (34.6)1010 (39.8)1210 (47.6)1250 (49.2)1610 (63.4)

--- - -

720 (1590)790 (1740)890 (1960)910 (2010)

1080 (2380)1120 (2470)1160 (2560)1240 (2730)1320 (2910)1280 (2820)

: Applicable for materials with density of 2,000 kg / m3 (3,370 lb/ yd3) or less: Applicable for materials with density of 1,600 kg / m3 (2,700 lb/ yd3) or less: Applicable for materials with density of 1,100 kg / m3 (1,850 lb/ yd3) or less

: Standard backhoe bucket: Heavy-duty : Rock-Heavy duty bucket

Boom and arms are of all-welded, low-stress, full-box section design. 5850 mm(19’ 2”) mono boom and 2100 mm(6’ 11”), 2500 mm(8’ 2”),3050 mm(10’ 0”), 3600 mm (11’ 10”), arms are available. Buckets are all-welded, high-strength steel implements.

Bucket digging force

Arm crowdforce

Arm Length Weight

mm(ft.in)kg(lb)

2100 (6’ 11”)1330 (2930)

Remark

156.9 [171.2]16000 [17450]35270 [38480]

178.5 [194.7]18200 [19850]40120 [43770]

135.3 [147.6]13800 [15050]30420 [33190]

140.2 [153.0]14300 [15600]31530 [34400]

2500 (8’ 2”)1360 (3000)

156.9 [171.2]16000 [17450]35270 [38480]

178.5 [194.7]18200 [19850]40120 [43770]

130.4 [142.3]13300 [14510]29320 [31990]

134.4 [146.6]13700 [14950]30200 [32950]

3050 (10’ 0”)1450 (3200)

156.9 [171.2]16000 [17450]35270 [38480]

178.5 [194.7]18200 [19850]40120 [43770]

114.7 [125.2]11700 [12760]25790 [28130]

118.7 [129.4]12100 [13200]26680 [29110]

3600 (11’ 10”)1520 (3350)

156.9 [171.2]16000 [17450]35270 [38480]

178.5 [194.7]18200 [19850]40120 [43770]

116.7 [127.3]11900 [12980]26230 [28610]

120.6 [131.6]12300 [13420]27120 [29590]

[ ]:Power Boost

kNkgflbf

kNkgflbf

kNkgflbf

kNkgflbf

SAE

ISO

SAE

ISO

Note : Arm weight including bucket cylinder and linkage. Standard arm

NEW 7 SERIES Robex 250LC-7

2100mm (6 11 ) 3050mm (10 0 ) 3600mm (11 10 )2500mm (8 2 )

Major component weight

1.03 (1.35)0.60 (0.78)0.79 (1.03)

SAE heaped m3 (yd3)

1.08 (1,41)1.50 (1,96)

1.07(1.40)1.15(1.50)

1.27(1.66)1.46(1.91)

1.16 (1.52)

Dimensions & Working ranges

Dimensions R250LC-7 / R250NLC-7

mm (ft in) mm (ft in)

A

BCDD’EFG

H

Boom length

Arm length

I Overall length

J Overall height of boom

K Track shoe width

R250LC-7

R250NLC-7L

Overallwidth

5850 (19’ 2”)2100

(6’ 11”)

10050(33’ 0”)

3530(11’ 7”)

600(24”)

3180(10’ 5”)

2980(9’ 9”)

700(28”)

3280(10’ 9”)

-

800(32”)

3380(11’ 1”)

-

900(36”)

3480(11’ 5”)

-

3050(10’ 0”)

9920(32’ 7”)

3220(10’ 7”)

2500(8’ 2”)

10000(32’ 10”)

3590(11’ 9”)

3600(11’ 10”)

9910(32’ 6”)

3590(11’ 9”)

Tumbler distance

Overall length of crawlerGround clearance of counterweightTail swing radiusRear-end lengthOverall width of upperstructureOverall height of cabMin. ground clearance

Track gauge

3830 (12’ 7”)3830 (12’ 7”)4640 (15’ 3”)1115 (3’ 8”)2965 (9’ 9”)2870 (9’ 11”)2840 (9’ 11”)2990 (9’ 10”)480 (1’ 7”)2580 (8’ 6”)2380 (7’ 10”)

R250LC-7R250NLC-7

R250LC-7R250NLC-7

mm (ft in)

Boom length

Arm length

A Max. digging reach

A’ Max. digging reachon ground

B Max. digging depth

B’

C

D

E

F

Max. digging depth(8' level)

5850(19’ 2”)2100

(6’ 11”)

9550(31’ 4”)

9360(30’ 9”)

6050(19’ 10”)

5840(19’ 2”)

2500(8’ 2”)

9870(32’ 5”)

9680(31’ 9”)

6450(21’ 2”)

6260(20’ 6”)

3050(10’ 0”)

10360(34’ 0”)

10190(33’ 5”)

7000(23’ 0”)

6830(22’ 5”)

3600(11’ 10”)

10870(35’ 8”)

10700(35’ 1”)

7550(24’ 9”)

7400(24’ 3”)

Max. vertical walldigging depth

5480(18’ 0”)

5640(18’ 6”)

6150(20’ 2”)

6830(22’ 5”)

Max. digging height9450

(31’ 0”)9460

(31’ 0”)9670

(31’ 9”)9920

(32’ 7”)

Max. dumping height 6360(20’ 10”)

6420(21’ 1”)

6630(21’ 9”)

6860(22’ 6”)

Min. swing radius 4420(14’ 6”)

4200(13’ 9”)

3980(13’ 1”)

3900(12’ 10”)

Working ranges R250LC-7 / R250NLC-7

Standard Equipment

Standard Equipment

E

KH

L

D, D'

A

B

I

J

C

F

G

Dimensions R250LC-7 High Chassis

mm (ft in) mm (ft in)

ABCDD’EFGH

Boom length

Arm length

I Overall length

J Overall height of boom

K Track shoe width

L Overall width

5850 (19’ 2”)2100

(6’ 11”)

3610(11’ 10”)

600(23.6”)

3390(11’ 1”)

700(27.6”)

3490(11’ 5”)

800(31.5”)

3590(11’ 9”)

900(35.4”)

3690(12’ 1”)

3050(10’ 6”)

3240(10’ 8”)

2500(8’ 2”)

3750(12’ 4”)

3600(11’ 10”)

10060(33’ 0”)

9760(32’ 0”)

9970(32’ 9”)

9930(32’ 7”)

3620(11’ 11”)

Tumbler distanceOverall length of crawlerGround clearance of counterweightTail swing radiusRear-end lengthOverall width of upperstructureOverall height of cabMin. ground clearanceTrack gauge

4030 (13’ 3”)4940 (16’ 2”)1470 (4’ 10”)2965 (9’ 9”)2870 (9’ 5”)2840 (9’ 4”)3345 (10’ 12”)765 (2’ 6”)2790 (9’ 2”)

mm (ft in)

Boom length

Arm length

A Max. digging reach

A’ Max. digging reachon ground

B Max. digging depth

B’

C

D

E

F

Max. digging depth(8' level)

5850(19’ 2”)2100

(6’ 11”)

9550(31’ 4”)

9280(30’ 5”)

5680(18’ 8”)

5470(17’ 11”)

2500(8’ 2”)

9870(32’ 5”)

9160(31’ 6”)

6080(19’ 11”)

5890(19’ 4”)

3050(10’ 6”)

10360(33’ 12”)

10110(33’ 2”)

6630(21’ 9”)

6460(21’ 2”)

3600(11’ 10”)

10870(35’ 8”)

10360(34’ 11”)

7180(23’ 7”)

7030(23’ 1”)

Max. vertical walldigging depth

5120(16’ 10”)

5300(17’ 5”)

5790(18’ 12”)

6470(21’ 3”)

Max. digging height9820

(32’ 3”)9840

(32’ 3”)10040

(32’ 11”)10280

(33’ 9”)

Max. dumping height 6730(22’ 1”)

6790(22’ 3”)

7000(22’ 12”)

7220(23’ 8”)

Min. swing radius 4140(13’ 7”)

4030(13’ 3”)

3940(12’ 11”)

3900(12’ 10”)

Working ranges R250LC-7 High Chassis

Standard Equipment

Standard Equipment

NEW 7 SERIES Robex 250LC-7

14 / 15

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*9080*20020*12220*26940*15960*35190

*9080*20020*12220*26940*15960*35190

*12710*28020*11110*24490*13310*29340*16960*37390*18260*40260

*12170*28020*11110*24490*13310*29340

14680323601505033180

*10140*22350*12150*2679012950285501288028400

*12250*27010

804017730

739016290

709015630

704015520

718015830

*6010*13250*7400

*163108070

177907830

172607750

170907850

17310

5490121005040

111104680

10320447098504400970044909900

*4210*9280*4620

*10190*5300

*116805790

127605570

122805430

119705390

11880

40408910389085803670809034307560323071203100683030706770

*2800*6170*3990*88004210928040909020

26505840255056202430536023205110

39608730353077803310730032607190338074503710818044209740

*5900*13010

2360520020404500187041201820401018904170210046302550562035807890

9.77(32.1)10.27(33.7)10.49(34.4)10.46(34.3)10.18(33.4)9.62

(31.6)8.71

(28.6)7.30

(24.0)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) 9.0 m (30.0 ft) Capacity Reach

At max. reach

m (ft )

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*15590*34370*17410*38380*13610*30000

13120289201342029590

*13610*30000

*7950*17530*10440*23020*12520*27600

13050287701303028730

*12310*27140

*9640*21250

*7950*17530

733016160

667014700

641014130

639014090

654014420

693015280

*5900*13010*6630

*14620*7750

*170908210

181007970

175707900

174208020

17680

529011660

503011090

466010270

43309550412090804060895041609170

604013320

587012940

569012540

557012280

33107300317069903010664029006390

520011460450099204190924041509150439096805040

11110*6420

*14150

28706330241053102190483021504740228050302660586035607850

8.32(27.3)8.91

(29.2)9.17

(30.1)9.14

(30.0)8.80

(28.9)8.13

(26.7)6.98

(22.9)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach

At max. reach

m (ft )

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*16500*36380

*16500*36380

*15230*33580*18440*40650*15140*33380

129302851013210291201375030310

*9730*21450*12000*2646013090288601299028640

*12700*28000*10620*23410

753016600

679014970

644014200

635014000

645014220

676014900

*6190*13650*7350

*162008270

182307990

176107880

173707940

17500

513011310

475010470

43809660414091304040891040909020

*5740*12650

5920130505720

126105570

122805520

12170

3380745032107080303066802900639028506280

488010760

426093903970875039308660413091104670

103005910

13030

26805910227050002070456020204450212046702440538031706990

8.67(28.4)9.23

(30.3)9.48

(31.1)9.45

(31.0)9.13

(30.0)8.49

(27.9)7.41

(24.3)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach

At max. reach

m (ft )

Rating over-side or 360 degreeRating over-front

Boom : 5.85m (19’ 2”) Arm : 2.10 m (6’ 11”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140lb) counterweight

Boom : 5.85m (19’ 2”) Arm : 2.50 m (8’ 2”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140 lb) counterweight

Boom : 5.85m (19’ 2”) Arm : 3.60 m (11’ 10”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140 lb) counterweight

NEW 7 SERIES Robex 250LC-7

1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping

load with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*15590*34370*17410*38380*13610*30000

15160334201547034110

*13610*30000

*7950*17530

*10440*23020*12520*2760013110289001309028860

*12310*27140*9640

*21250

*7950*17530

820018080

752016580

725015980

723015940

739016290

779017170

*5900*13010*6630

*14620*7750

*170908250

181908010

176607940

175008050

17750

584012870

557012280

519011440

485010690

464010230

458010100

468010320

606013360

590013010

572012610

560012350

36908140355078303380745032707210

522011510452099604210928041709190441097205060

11160*6420

*14150

32007050271059702480547024305360258056902990659039808770

8.32(27.3)8.91

(29.2)9.17

(30.1)9.14

(30.0)8.80

(28.9)8.13

(26.7)6.98

(22.9)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach

At max. reach

m (ft )

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*16500*36380

*16500*36380

*15230*33580*18440*40650*15140*33380

14960329801525033620

*15140*33380

*9730*21450*12000*26460

13150289901305028770

*12700*28000*10620*23410

8410185407650

168707280

160507190

158507300

160907620

16800

*6190*13650

*7350*16200

8310183208030

177007910

174407970

17570

5670125005280

116404910

108204660

102704560

100504610

10160

*5740*12650

595013120

575012680

560012350

555012240

3770831035907910341075203270721032207100

490010800

428094403990880039508710415091504690

103405940

13100

30006610255056202340516022905050241053102750606035507830

8.67(28.4)9.23

(30.3)9.48

(31.1)9.45

(31.0)9.13

(30.0)8.49

(27.9)7.41

(24.3)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach

At max. reach

m (ft )

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*10020*22090*13650*30090*17980*39640

*10020*22090*13650*30090*17980*39640

*13880*30600*9530

*21010*10660*23500*13980*30820*18590*40980*16880*37210

*13880*30600

*9530*21010*10660*23500*13980*30820

14860327601534033820

*8560*18870*11070*24410*12720*28040

12930285101296028570

*11570*25510

*8560*18870

7800172007280

160507090

156307110

156707340

16180

*5460*12040

*6670*14700

*7970*17570

8010176607830

172607820

172408020

17680

*5460*12040

5360118204950

109104640

1023044809880447098504640

10230

*4100*9040*5160

*11380*5780

*127405750

126805560

122605460

12040

395087103830844036207980340075003230712031406920

4400970038808550363080003580789037308220415091505080

11200*6060

*13360

2660586022805030209046102040450021304700239052702980657044809880

9.22(30.2)9.74

(32.0)9.98

(32.7)9.95

(32.6)9.65

(31.7)9.05

(29.7)8.06

(26.4)6.48

(21.3)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach

At max. reach

m (ft )

1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping

load with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

Lifting capacities - R250LC-7 Rating over-side or 360 degreeRating over-front

Lifting capacities - R250NLC-7Boom : 5.85m (19’ 2”) Arm : 2.50 m (8’ 2”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140lb) counterweight

Boom : 5.85m (19’ 82”) Arm : 3.05 m (10’ 0”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140 lb) counterweight

Boom : 5.85m (19’ 2”) Arm : 2.10 m (6’ 11”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140 lb) counterweight

Lifting Capacities 16 / 17

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)

*17660*38930*16740*36910

*17660*38930*16740*36910

*8510*18760*11020*24290*12840*28310*13480*29720*13180*29060*11890*26210

*8510*18760

988021780

928020460

908020020

910020060

931020530

*6020*13270

*6870*15150

*8020*17680

*9060*19970

9620212109590

21140*8600

*18960

*6020*13270

668014730

629013870

597013160

579012760

576012700

592013050

*6200*13670

*6710*14790

6840150806740

14860

45309990437096304210928041209080

*5390*11880

531011710

504011110

508011200

545012020

638014070*6310

*13910

3780833033107300311068603120688033607410395087105420

11950

8.49(27.9)9.00

(29.5)9.19

(30.2)9.09

(29.8)8.68

(28.5)7.91

(26.0)6.61

(21.7)

kglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach

At max. reach

m (ft )

Rating over-side or 360 degreeRating over-front

Boom : 5.85m (19’ 2”) Arm : 2.10 m (6’ 11”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140lb) counterweight

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*9080*20020*12220*26940*15960*35190

*9080*20020*12220*26940*15960*35190

*12710*28020*11110*24490*13310*29340*16960*37390*18260*40260

*12710*28020*11110*24490125602769012660279101301028680

*10140*22350*12150*2679012890284201282028260

*12250*27010

716015790

654014420

625013780

619013650

633013960

*6010*13250*7400

*163108030

177007790

171707710

170007820

17240

494010890

4510994041609170395087103880855039708750

*4210*9280*4620

*10190*5300

*116805760

127005540

122105400

119005370

11840

36608070351077403290725030606750286063102730602027005950

*2800*6170*3990*8800

4180922040708970

23505180225049602130470020304480

39408690351077403290725032407140336074103690814043909680

*5900*13010

2090461017903950163035901580348016403620183040302240494031907030

9.77(32.1)10.27(33.7)10.49(34.4)10.46(34.3)10.18(33.4)9.62

(31.6)8.71

(28.6)7.30

(24.0)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) 9.0 m (30.0 ft) Capacity Reach

At max. reach

m (ft )

Boom : 5.85m (19’ 2”) Arm : 3.60 m (11’ 10”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140 lb) counterweight

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*6860*15120*9790

*21580*13030*28730*16990*37460

*6860*15120

*9790*21580*13030*28730*16990*37460

*12780*28180*11520*25400*11460*25260*14050*30970*18050*39790*17530*38650

*12780*28180*11520*25400*11460*25260*14050*30970*18050*39790*17530*38650

*8090*17840*10710*23610*12470*27490*13240*29190*13080*28840*11820*26060

*8090*17840

9730214509150

201708910

196408900

196209100

20060

*6340*13980

*7720*17020

*8820*19440

9440208109400

20720*8500

*18740

*6340*13890

613013510

580012790

561012370

558012300

572012610

*4280*9440*4760

*10490*5480

*120806260

138006680

147306560

144606560

14460

*4280*94404720

104104480988042409350405089303940869039408690

*3150*6940*4200*9260*4810

*10600*4500*9920

*3150*6940

320070503070677029806570

*4210*9280

419092404000882040008820420092604670

103005650

12460*5890

*12990

287063302560564024105310239052702510553028106190345076105000

11020

9.92(32.5)10.34(33.9)10.50(34.4)10.42(34.2)10.07(33.0)9.44

(31.0)8.43

(27.7)6.86

(22.5)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) 9.0 m (30.0 ft) Capacity Reach

At max. reach

m (ft )

Boom : 5.85m (19’ 2”) Arm : 3.60 m (11’ 10”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140 lb) counterweight

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*10020*22090*13650*30090*17980*39640

*10020*22090*13650*30090*17980*39640

*13880*30600*9530

*21010*10660*23500*13980*30820*18590*40980*16880*37210

*13880*30600

*9530*21010*10660*23500

126202782012840283101329029300

*8560*18870*11070*24410*12720*28040

12870283701290028440

*11570*25510

7780171506940

153006430

141806250

137806270

138206490

14310

*5460*12040

*6670*14700

*7970*17570

7980175907790

171707780

171507980

17590

5230115304830

106504420974041209080396087303950871041209080

*4100*9040*5160

*11380*5780

*127405720

126105530

121905430

11970

357078703440758032407140303066802850628027606080

4380966038608510361079603560785037108180413091105060

11160*6060

*13360

2370522020204450184040601790395018604100210046302640582040108840

9.22(30.2)9.74

(32.0)9.98

(32.7)9.95

(32.6)9.65

(31.7)9.05

(29.7)8.06

(26.4)6.48

(21.3)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach

At max. reach

m (ft )

Boom : 5.85m (19’ 2”) Arm : 3.05 m (10’ 0”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140lb) counterweight

1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping

load with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*7400*16310*10840*23900*14600*32190

*7400*16310*10840*23900*14600*32190

*15600*34390*9380

*20680*11330*24980*14940*32940*19040*41980*15960*35190

*15600*34390

*9380*20680*11330*24980*14940*32940*19040*41980*15960*35190

*9200*20280*11560*25490*12950*28550*13340*29410*12790*28200*10980*24210

*9200*20280

9510209709060

199708920

196709000

198409290

20480

*5720*12610

*6980*15390

*8240*18170

*9180*20240

946020860*9310

*20530

*5720*12610

645014220

605013340

576012700

564012430

566012480

*4570*10080

*5290*11660

*5940*13100

*6640*14640

6680147306610

14570

*4570*10080

46501025044309770422093004060895039908800

*4600*10140

459010120

43709630438096604620

101905220

115106120

*13490

31907030283062402660586026505840280061703180701040408910

9.37(30.7)9.82

(32.2)9.99

(32.8)9.90

(32.5)9.53

(31.3)8.85

(29.0)7.76

(25.5)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach

At max. reach

m (ft )

Boom : 5.85m (19’ 2”) Arm : 3.05 m (11’ 10”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140 lb) counterweight

6.0 m(20.0 ft)4.5 m

(15.0 ft)3.0 m

(10.0 ft)1.5 m(5.0 ft)

GroundLine

-1.5 m(-5.0 ft)-3.0 m

(-10.0 ft)-4.5 m

(-15.0 ft)

*12220*26940*17990*39660

*12220*26940*17990*39660

*16770*36970*17840*39330*13960*30780

*16770*36970*17840*39330*13960*30780

*7770*17130*10330*22770*12400*27340*13360*29450*13340*29410*12370*27270*9750

*21500

*7770*171301008022220

939020700

909020040

905019950

921020300

961021190

*5540*12210*6440

*14200*7650

*16870*8780

*19360*9520

*209909560

21080*9020

*19890

*5540*12210*6440

*142006380

140706020

132705800

127905730

126305830

12850

*5850*12900

*6430*14180

6860151206730

14840

460010140441097204230933041109060

*5050*11130

503011090

479010560

481010600

512011290

590013010*6400

*14110

3560785031406920295065002940648031406920364080204810

10600

8.83(29.0)9.32

(30.6)9.50

(31.2)9.40

(30.8)9.01

(29.6)8.28

(27.2)7.07

(23.2)

kglbkglbkglbkglbkglbkglbkglbkglb

Load pointheightm(ft)

Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach

At max. reach

m (ft )

Boom : 5.85m (19’ 2”) Arm : 2.50 m (8’ 2”) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24”) triple grouser with 4,600kg (10,140lb) counterweight

NEW 7 SERIES Robex 250LC-7

1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping

load with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

Lifting Capacities 18 / 19

Lifting capacities - R250LC-7High Chassis