Standard Deviation for Grouped D ata
description
Transcript of Standard Deviation for Grouped D ata
2.4 - 2.5
Standard Deviation for Grouped Data
The procedure for finding the variance and standard deviation for grouped data is similar to that for finding the mean for grouped data, and it uses the midpoints of each class.
Finding the Standard Deviation for Grouped Data
Make a table as shownA
ClassB
FrequencyC
Midpointd
f*xm
ef*xm
2
Multiply the frequency by the midpoint for each class, and place the products in Column D.Multiply the frequency by the square of the midpoint, and place the products in column E.Find the sums of columns B, D, and E, (The sums of column B is n. The sum of column D is Ʃf*xm. The sum of column E is Ʃf*xm
2)
Substitute in the formula and solve to get the variance.
Take the square root to get the standard deviation
Procedure Table
ExampleFind the variance
and the standard deviation for the frequency distribution of the data. The data represent the number of miles that 20 runners ran during one week.
Class Frequency
Midpoint
5.5-10.5 1 810.5-15.5 2 1315.5-20.5 3 1820.5-25.5 5 2325.5-30.5 4 2830.5-35.5 3 3335.5-40.5 2 28
Class Frequency Midpoint f-xm f-xm
2
5.5-10.5 1 8 8 6410.5-15.5 2 13 26 67615.5-20.5 3 18 54 2,91620.5-25.5 5 23 115 13,22525.5-30.5 4 28 112 1254430.5-35.5 3 33 99 980135.5-40.5 2 28 76 5776
n=20 Ʃf-xm = 490 is Ʃf-xm2 =
45,002
Make the table shown, and find the midpoint for each class
Multiply the frequency by the midpoint for each class, and place the products in the 4th columnMultiply the frequency by the square of the midpoint, he products and place the 5th column.Find the sums of the 2nd, 4th and 5th column.
=20(45,002)-4902/20(20-1)=900,040-240,100/20(19)=659,940/380=1736.68Take the square root to get the standard
deviationS= √ 1736.68 = 41.67Be sure to use the number found in the sum of the
2nd column for n. Do not use the number of classes.
Apply formula
The range can be used to approximate the standard deviation. The approximation is called the range rule of thumb.
S ≈ range/4Example: The data set 5, 8, 8, 9, 10, 12, and
13, has a standard deviation o f 2.7 and the range is 13-5= 8 The range rule of thumb is s≈ 2.
In this example the range rule of thumb underestimates the standard deviation but it is in the ballpark.
Range Rule of Thumb
The range rule of thumb can be used to estimate the largest and smallest data values of a data set. The smallest value will be approximately 2 standard deviations below the mean, and the largest data value will be approximately 2 standard deviations above the mean of the data set.
Example the mean from the data set 5, 8, 8, 9, 10, 12, and 13, is 9.3 hence,Smallest data value = X - 2s = 9.3 - 2(2.8) = 3.7Largest data value = X + 2s = 9.3 + 2(2.8) = 14.9
Now look back at the original data set. The Smallest was 5 and the largest was 13. Again these are considered rough estimates. Better approximations can be obtained by using Chebyshev’s theorem and the empirical rule.
Range Rule of Thumb
Chebychev’s TheoremThe portion of values from any data set lying
within z standard deviations (z>1) of the mean is at least 1 – 1/z2.
Z = 2: In any data set, at least 1 – 1/22 = ¾, or 75%, of the data lie within 2 standard deviations of the mean.
Z=3: In any data set, at least 1 – 1/32 = 8/9, or 88.9%, of the data lie within 3 standard deviations of the mean.
Applies to any distribution regardless of it’s shape.
Chebychev’s Theorem Example
The age distributions for Alaska and Florida are shown in the histograms. Decide which is which. Apply Chebychev’s Theorem to the data for Florida.
PracticeThe mean price of houses in a certain
neighborhood is $50,000, and the standard deviation is $10,000. Find the price range for which at least 75% of the houses will sell.
Chebyshev’s theorem can be used to find the minimum percentage of data values that will fall between any two given values.
Example: A survey of local companies found that the mean amount of travel allowances for executives was $0.25 per mile. The standard deviation was $0.02. Using Chebychev’s theorem, find the minimum percentage of the data values that will fall between $0.20 and $0.30.
Chebychev’s Theorem
Empirical Rule
Data values that lie more than 2 standard deviations from the mean are considered unusual. Data values that lie more than three standard deviations from the mean are very unusual.
Applies only to bell shaped (NORMAL) distributionsApproximately 68% of the data values will fall
within 1 standard deviation of the mean.Approximately 95% of the data values will fall
within 2 standard deviation of the mean.Approximately 99.7% of the data values will fall
within 3 standard deviation of the mean.
Empirical Rule ( or 68-95-99.7 Rule)Many real-life data sets have distributions that
are approximately symmetric and bell shaped. 68% of the data lie within 1 standard deviation
95% of the data lie within 2 standard deviations
99.7% of the data lie within 3 standard deviations
Using the Empirical Rule In a survey conducted by the
National Center for Health Statistics, the sample mean height of women in the U.S. (ages 20-29) was 64 inches with a sample standard deviation of 2.75 inches. Estimate the percent of women whose heights are between 64 inches and 69.5 inches.
We know 64 is the mean to calculate how much 2 standard deviations from the mean is we take the MEAN + 2(STANDARD DEVIATIONS)= or 64+2(2.75)=69.5
Using the Empirical RuleBecause the distribution
is bell shaped, you can use the Empirical Rule.
Because the 69.5 is 2 standard deviations above the mean height, the percent of the heights between 64 inches and 69.5 inches is 34% + 13.6 % or 47.6%
So 47.6% of women are between 64 inches and 69.5 inches.