standalone process viscometer
1
As it is Hydramotion’s policy constantly to develop and improve its products, some information contained in this document may change without notice M04-01-035 Rev5 06/16 any pipe, any fluid no guards or shields Integral temperature sensor no moving parts — no maintenance SPECIFICATION ViscoJet VJ1-100 standalone process viscometer 0 - 1,000 cP 1 second 1% of reading or ±0.1 cP 0.3% of reading or ±0.05 cP 2 × 4-20mA configurable, representing viscosity, referenced viscosity or temperature RS485 ModBus data link 24V DC @ 80 mA Integrated temperature measurement –50 - +150 °C * 50 bar * ¾" or 1" BSPP/NPS, or 1½" cone seat as required standard instrument cable all-welded, crevice-free head: SS316 (EN 1.4401) sensor: SS316 (EN 1.4401) * (optional: S32507 duplex steel [EN 1.4410], alloy C22, alloy C276) N6 0.8 μm Ra 3 kg IP67 ViscoLink data viewing and logging package (Windows-based for PC) Viscosity range Measurement time Accuracy Repeatability Analogue outputs Digital outputs Power supply Integral thermometer Temperature range Pressure range Pipe connection Cable length Cable type Construction Materials Surface finish Weight Ingress protection Software * Custom variations to specification available to order ViscoJet 100 transducer 191mm 164mm 50mm Ø24mm M20 cable gland Heatsink Wrench flats Process connection Integral temperature sensor
Transcript of standalone process viscometer
As it is Hydramotion’s policy constantly to develop and improve its products, some information contained in this document may change without noticeM04-01-035 Rev5 06/16
any pipe, any fluid
no guards or shields
Integral temperature sensor
no moving parts — no maintenance
SPECIFICATION
ViscoJet VJ1-100standalone process viscometer
0 - 1,000 cP
1 second
1% of reading or ±0.1 cP
0.3% of reading or ±0.05 cP
2 × 4-20mA configurable, representing viscosity,
referenced viscosity or temperature
RS485 ModBus data link
24V DC @ 80 mA
Integrated temperature measurement
–50 - +150 °C *
50 bar *
¾" or 1" BSPP/NPS, or 1½" cone seat
as required
standard instrument cable
all-welded, crevice-free
head: SS316 (EN 1.4401)
sensor: SS316 (EN 1.4401) *
(optional: S32507 duplex steel [EN 1.4410],
alloy C22, alloy C276)
N6 0.8 µm Ra
3 kg
IP67
ViscoLink data viewing and logging
package (Windows-based for PC)
Viscosity range
Measurement time
Accuracy
Repeatability
Analogue outputs
Digital outputs
Power supply
Integral thermometer
Temperature range
Pressure range
Pipe connection
Cable length
Cable type
Construction
Materials
Surface finish
Weight
Ingress protection
Software
* Custom variations to specification available to order
ViscoJet 100 transducer
2 × 4-20mA configurable, representing viscosity,
191mm
164mm
50mmØ24mm
M20 cable gland
Heatsink
Wrench flats
Process connection
Integral temperature sensor
![Relative Viscometer · 2020. 2. 10. · Relative Viscometer [Shown below with Full Automation Package] The Relative Viscometer was specifically developed to measure the viscosities](https://static.fdocuments.net/doc/165x107/608565357443793464089d0c/relative-viscometer-2020-2-10-relative-viscometer-shown-below-with-full-automation.jpg)
