Stand-by power: 220 kVA Diesel Generating Sets, made … for aplication and installation. STANDARD...

4
Stand-by power: 220 kVA GNS 220 D Water cooled, Diesel engine Radiator with mechanical fan Protective grille for rotating and hot parts Electric starter and charge alternator Starting battery (with lead acid) including rack and cables Engine jacket water heater Base frame design incorporates an integral fuel tank and anti-vibration isolators Flexible fuel connection hoses Single bearing, class H alternator Industrial exhaust silencer and steel bellows supplied separately Static battery charger Manual for aplication and installation. STANDARD SPECIFICATIONS 3 Phase Ratings, 50 Hz, PF 0,8 400/230 220,00 176,00 200,00 160,00 288,00 Standby Rating (ESP) Prime Rating (PRP) Voltage kVA kW kVA kW Amp Standby Rating (ESP): Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. ESP is in accordance with ISO 8528. Overload is not allowed. Prime Rating (PRP): Applicable for supplying power to varying electrical load for unlimited hours. PRP is in accordance with ISO 8528. 10 % overload capability is available for a period of 1 hour within 12-hour perod of operation,in accordance with ISO 3046. OPTIONAL EQUIPMENTS TRANSFER SWITCH - Motor Switch - Four Pole Contactor - Three Pole Contactor OTHER ACCESSORIES - Tool kit for maintenance - Trailer - Inlet and outlet acoustic baffles - Main Fuel Tank - Double wall chassis - 1500/3000 hours maintenance kit - Inlet and outlet motorised louvers - Low and high fuel level alarm - Manual oil drain pump - Automatic or manual fuel filling system - Duct adapter ( on radiator) - Enclosure: weater protective or sound attenuated - Residential silencer CONTROL SYSTEM - Remote communication with modem - Alarm output relays - Charge Ammeter - Earth fault, single set - Transition synchronization with mains - Automatic synchronising and power control system ( multi gen-set Parallel ) - Remote relay output - Remote annunciator panel ENGINE - Oil heater - Fuel-Water Seperator Filter ALTERNATOR - PMG excitation + AVR - Main line circuit breaker - Anti-Condensation Heater - Over sized alternator Diesel Generating Sets, made for Europe www.irmas.ro This generator is available with CE certification GNS power generation This generator set is manufactured in facilities certified to ISO 9001. This generator set has been designed to meet ISO 8528 regulation. Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories witout prior notice.

Transcript of Stand-by power: 220 kVA Diesel Generating Sets, made … for aplication and installation. STANDARD...

Page 1: Stand-by power: 220 kVA Diesel Generating Sets, made … for aplication and installation. STANDARD SPECIFICATIONS 3 Phase Ratings, 50 Hz, ... Deepsea 5220 / 7320 Control Module Generator

Stand-by power: 220 kVA

GNS 220 D

Water cooled, Diesel engine Radiator with mechanical fan Protective grille for rotating and hot parts Electric starter and charge alternator Starting battery (with lead acid) including rack and cables Engine jacket water heater Base frame design incorporates an integral fuel tank and anti-vibration isolators Flexible fuel connection hoses Single bearing, class H alternator Industrial exhaust silencer and steel bellows supplied separately Static battery charger Manual for aplication and installation.

STANDARD SPECIFICATIONS

3 Phase Ratings, 50 Hz, PF 0,8

400/230 220,00 176,00 200,00 160,00 288,00

Standby Rating (ESP) Prime Rating (PRP)

Voltage kVA kW kVA kW Amp

Standby Rating (ESP): Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. ESP is in accordance with ISO 8528. Overload is not allowed.

Prime Rating (PRP): Applicable for supplying power to varying electrical load for unlimited hours. PRP is in accordance with ISO 8528. 10 % overload capability is available for a period of 1 hour within 12-hour perod of operation,in accordance with ISO 3046.

OPTIONAL EQUIPMENTS

TRANSFER SWITCH

- Motor Switch- Four Pole Contactor- Three Pole Contactor

OTHER ACCESSORIES

- Tool kit for maintenance- Trailer- Inlet and outlet acoustic baffles

- Main Fuel Tank- Double wall chassis- 1500/3000 hours maintenance kit

- Inlet and outlet motorised louvers

- Low and high fuel level alarm- Manual oil drain pump- Automatic or manual fuel filling system

- Duct adapter ( on radiator)- Enclosure: weater protective or sound attenuated- Residential silencer

CONTROL SYSTEM

- Remote communication with modem- Alarm output relays

- Charge Ammeter- Earth fault, single set

- Transition synchronization with mains

- Automatic synchronising and power control system ( multi gen-set Parallel )

- Remote relay output- Remote annunciator panel

ENGINE

- Oil heater- Fuel-Water Seperator Filter

ALTERNATOR

- PMG excitation + AVR- Main line circuit breaker

- Anti-Condensation Heater- Over sized alternator

Diesel Generating Sets, made for Europe

www.irmas.ro

This generator is available withCE certification

GNS power generation

This generator set is manufactured in facilities certified to ISO 9001.

This generator set has been designed to meet ISO 8528 regulation.

Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories witout prior notice.

Page 2: Stand-by power: 220 kVA Diesel Generating Sets, made … for aplication and installation. STANDARD SPECIFICATIONS 3 Phase Ratings, 50 Hz, ... Deepsea 5220 / 7320 Control Module Generator

Manufacturer

DIESEL ENGINE SPECIFICATIONS

Coolant Capacity L 48,50

Intake Air Flow m³ /min. 12,10

Governor Electronic

Oil Capacity L 15,50

Exhaust Gas Temperature ° C 580,00

Start System 24 V d.c.

Radiator Cooling Air m³ /min. 250,00

Exhaust Gas Flow m³ /min. 34,00

Fuel ConsumptionL/h

Load

43,10 31,70 21,10

%100 %75 %50

Aspiration and Cooling Turbo Charged and Change Air Cooled

No. of Cylinders and Build 6 Cylinder, In Line

Rated Speed (rpm) rpm 1500

Maximum Standby Power 199,00 kW[266,00HP]

1500 rpm

Compression Ratio 16,4:1

Bore and Stroke mm 111X139

Total Displacement L 8,070

Doosan

Model P086TI

ALTERNATOR SPECIFICATIONS

Design Brushless, 4 poles

Power kVA 200,00

Current A 288,00

Insulation Class H

Stator 2 / 3 steps

Temperature H

Rotor Single Bearing System, Flexible Disc

Voltage V 400/230

Phase 3

Cos Phi 0,80

Excitation System Electronic ( AVR )

Make Mecc Alte

Frequency Hz 50

Model ECO 38 2SN/4

DIEMENSIONS AND WEIGHT

Canopykg.

Dry Weight

mm.

Lenght

mm.

Width

mm.

Height

L

Tank Capacity

2175 3400 1160 1770 380

1800,00 2680,00 1150,00 1630,00 380,00

Open Typekg.

Dry Weight

mm.

Lenght

mm.

Width

mm.

Height

L

Tank Capacity

Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories witout prior notice.

Please ask your sales agentWe also can use: Stamford, Leroy Somer, Linz, Marelli, GNS alternators

Another Brand:

Please ask your sales agent for the exact dimensions and weight

General dimensions:

Page 3: Stand-by power: 220 kVA Diesel Generating Sets, made … for aplication and installation. STANDARD SPECIFICATIONS 3 Phase Ratings, 50 Hz, ... Deepsea 5220 / 7320 Control Module Generator

The model 5220 / 7320 is an Automatic Mains Failure Control module Emergency stop

5220 / 7320 digital automatic control module

Deepsea 5220 / 7320 Control Module

Generator short-circuit protection

Environmental Testing Standards

Electromagnetic Compatibility

Mains out of limits

Electrical SafetyBS EN 60950 Low Voltage Dirctive/Safety of information technology

Humidity

kVA L1, L2, L3,totalGenerator total power kW L1, L2, L3,total

Engine Hours Run HourGenerator total power

HzEngine Speed RPM

5Hz to @ +/-7.5mm constant displacement.each of the three major axes.

major axes 15gn amplitude.11mS duration.

8Hz to 500Hz 2gn constant acceleration.

Hot : BS EN 60068-2-2 to 70°C

Temperature

EN 61000-6-2:1999 EMC, Immunity Standards for the Industrial Environmentthe Industrial Environment

Generator Frequency Hz

Generator Volts Volts L1-L2, L2-L3, L3-L1Generator Amps Amps L1, L2, L3

Mains Volts

Low oil pressure

Under/over generator frequency

High engine temperatureFail to start

equipments, including electrical business equipment

BS EN 6068-2-27 Three half sine shocks in each of the three

Vibration

Loss of speed sensing signal

Mains Volts Volts L1-L2, L2-L3, L3-L1

Generator phase rotation error

Alarm Channels

Cold : BS EN 60068-2-1 to -30°C

Under/over generator voltage

Specifications

Voltmeter

interface also provides real time diagnostic facilities

Reverse power

BS EN 60068-2-6 Ten sweeps (up and back down) at 1 octave/minute in

Engine Oil pressure kPa

Charge fail

BS EN 50081-2:1992 and EN 61000-6-4:2000 EMC, Emission Standards for

Over-current

Low/high DC battery voltage

240mm x 172mm dimensions

Generator power factor Cosφ L1, L2, L3,total

Fuel level % Engine Temperature °C

Under/over speed

Voltmeter commutator

Hourmeter Optional Input Functions

Volts L1-N, L2-N, L3-N

Plant Battery Volts Volts

Mains Frequency

Volts L1-N, L2-N, L3-NGenerator Volts Input Functions display on LCD

Control PanelStandard Equipments

Pushbutton Controls

automaticly shutting down the genset and indicating failures by means of an

Ampermeter commutator

Description

Emergency stop button

The modul is used to monitor a mains supply and automaticlly start a standby generator set. The module also provides indication of operational status and fault conditions

Ampermeter

BS EN 2011 part 2.1 93% RH @ 40° for 48 hours

STOP / START

Shock

Easy comprehended display (Hid-Til-Lit SMD LED technology)

70mm x 40mm dimensions, 4 segment grafical LCD monitor Developed 16-bit Microprocessor design

SMS messaging capability with suitable GSM Modem

kVA,kW ve Cosφ measurements System parameters can be adjusted manually from the front panel

module from a remote location (P810 Software Kit necessary) Easy pushbutton controls

LCD PAGE

LED mimic diagram

AUTO, TEST, MANUAL

PC software is MS Windows based and allows the operator to control the

Selected timers and alarms can be altered by the user from the front panel. Alterations to the system are made using the 810 interface and a PC. This

Communication with MODEM

IO

Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories witout prior notice.

We also can use: DSE Electronics, AMF.4.0, DKG models, another brandPlease ask your sales agent

Another Brand:

Page 4: Stand-by power: 220 kVA Diesel Generating Sets, made … for aplication and installation. STANDARD SPECIFICATIONS 3 Phase Ratings, 50 Hz, ... Deepsea 5220 / 7320 Control Module Generator

generating sets from GNS, meet event the sound requirements and provide optimum protection from inclement weather

IntroductionSound–attenuated and Weather-protective Enclosures Sound-attenuated and weather protective enclosures for

and development by our specialist acoustic engineers. Our modular designed sound insulated canopies provide ease of access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.

Standard Specifications

Compact footprint, low profile design. Enclosure, generator set, exhaust system and fuel tank are pre-ssembled, pre-integrated and shipped as one package Body made from steel components treated with polyester powder coating Fire retardant foam insulation Easy access to all service points Exhaust system inside canopy Large doors on each side Control panel viewing window in a lockable access door Emergency stop push button mounted on enclosure exterior Cooling fan and battery charging alternator fully guarded Fuel fill and battery can only be reached via lockable access doors. Lifting points on the top of canopy and base frame Customer options available to meet your applications needs.

Standard Generator

Generator with Soundproof Canopy

O I

W

Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories witout prior notice.