Stamtec - LIFTPLANET.netliftplanet.net/assets/uploads/files/cfb86-8a23d-stamtec-company... ·...

StamtecL i f t C o n t r o l P a n e l s

T h e A r t o f E l e v a t i n g

Company Presentation

Stamtec, based in Thessalonik i , Greece,

designs, develops and manufactures

control panels for l i f ts


Stamtec products are manufactured in accordance with current European and Greek regulations.

Specifically, Stamtec control panels comply fully with the requirements of the Community Directives

95/16/EC, 2006/95/EC, 2004/108/EC

and are in conformity with standards

EN12015, EN12016, EN 60439-1, EN 81-1+A3 and EN 81-2+A3.

Company PresentationCertificates


Based on the long experience of its executives, Stamtec presents

two decades of constantly rising.

Stamtec is one of the leading manufacturers of lift control panels

in Greece, with sales also in the Balkan Peninsula, in the

Mediterranean Islands and the Arab countries.


Stamtec Greek Market

Sales all over Greek territory

Special projects


Stamtec ExportsCyprus, United Kingdom (UK), FYROM, Albania, Serbia, Montenegro, Malta, Libya, Morocco, Tunisia, Iraq, Syria,

Kuwait, United Arab Emirates, Algeria, Saudi Arabia

Principles Safety

Reliability

Immediate and Ongoing Support

Stamtec manufacture high technology lift control panels, having as principles the safety, the quality, and the ongoing support of all its products.

Chosen materials from well known suppliers are used in the manufacture of the control panels so that their correct, smooth and long lasting operation

may be ensured.

Zero Max Main Board

Main board Zero Max is designed and manufactured entirely by Stamtec.

Programming and configuration are made directly on board. Immediate and

easy determination of any faulty operation may be ascertained via the

pioneering fault and event recording.

Discernible legible messages appear on the liquid crystal display concerning

the type of fault, the car location and direction at the time the fault appears,

as well as the degree of its repetition.

Zero Max Main Board

Layout

Zero Max Main Board

Drawing

Zero Max Main Board

Call and Display Board for Zero Max (LFT06SDEC-00)

Zero Max Main Board

Zero Max User Interface – Upper Part

RESET

INC

DEC

PREV

NEXT

ENTERESC

Zero Max Main Board (Upper Part)

LCD BRIGHT

ST

AM

TE

C

Jumper

CAN LIN2

RS232

LIN1

Zero Max Main Board

Boards Buttons FunctionButtons Function Description

INC + DEC1) Enter in programming mode. Initially Board and Memory Version are shown and Enter Code is requested.2) Exit from programming mode – the panel is ready to work again in Normal Mode

ENTER

1) Enter in a submenu.2) Select a menu item to modify. An arrow “>” is displayed on the left of the current data value, that means we can change the value.3) Complete the operation of changing a data value, saving the new value. The arrow “>” disappears.

ESC1) Exit from a current submenu and go back to the previous menu.2) Exit from the current data value without saving any changes. The arrow “>” disappears.

PREV1) Scroll up in the current submenu.2) Increase - change the value of a setting, when the arrow “>” is displayed on the left of the current setting.

NEXT1) Scroll down in the current submenu.2) Decrease - change the value of a setting, when the arrow “>” is displayed on the left of the current setting.

RESET1) Reset of the board and check serial communication between main board and serial car card and serial landing modules.

Zero Max Main Board

Lcd Display Indications during Normal Mode

U C R T L B 0

N e x t S t o p X X E R

DOWN PRE-FINAL

LIMIT(U)

COUNT / CHANGE SPEED

(CK)

STOP AT FLOOR

(R)

UPPRE-FINAL

LIMIT(T)

LOCKSCLOSED

UP / DOWN DIRECTION

CURRENT CAR POSITION

CURRENT CALL EXECUTED (XX) :XX = Floor 0, 1, 2, ..., 17

ERRORREGISTERED

CAR DOORCLOSED

M=MASTERS=SLAVE

(DUPLEX)

Stamtec Products

Elevator Control Panels

Hydraulic Lift Control Panels with Emergency Lowering System: Direct On Line Start, Star-Delta Start, Hydraulic VVVF, Electronic Valve Control, Hydraulic MRL, Any Valve Block

Traction Lift Control Panels: One Speed, Two Speed, VVVF Control, Traction VVVF MRL for Gearless Machines

Emergency Traction Panels: Emergency Battery Powered Evacuation Systems for All Type Traction Elevators

Car Serial Interface Board Incorporated in Pre-wired Lift Inspection Control Box

Landing Serial Interface Boards

Reactive Power Compensation Panels (Cosf Correction)


Stamtec Products

Hydraulic Lift Control Panels with Emergency Lowering System: Direct On Line Start, Star-Delta Start, Hydraulic VVVF, Electronic Valve Control, Hydraulic MRL, Any Valve Block


Stamtec Products

Traction Lift Control Panels: One Speed, Two Speed, VVVF Control


Stamtec Products

Traction Lift Control Panels: Traction VVVF MRL for Gearless Machines


Single Floor Panel Single Shaft Panel Floor & Shaft Panel

Stamtec Products

Emergency Traction Panels: Emergency Battery Powered Evacuation Systems for All Type Traction Elevators


Stamtec Products

Full Prewiring System

Machine Room, Shaft & Car Prewiring


Stamtec Products

Car Serial Interface Board Incorporated in Pre-wired Lift Inspection Control Box


Stamtec Products

Landing Serial Interface Boards


Stamtec Products

Reactive Power Compensation Panels (Cosf Correction)


Stamtec ProductsEscalator Control Panels

Lift 232Monitor and Control Program for main board Zero Max

The main board can communicate with the computer (Netbook, Laptop, Desktop) through the Lift232

Monitor and Control Program.

The Monitor and Control Program gives the user many possibilities including:

Check in real-time the traffic and current state of the lift (change of inputs state, check safety circuit, ...)

Customization of the program to meet the requirements of the elevator installation (eg , Hydraulic,

Traction, ... )

Enable / disable specific functions (eg , Car and Floor Serial Operation ... )

Timers Modification

Overview of Active Faults

Overview / Delete Stored Faults (Installation, Internal and Serial Communication Faults)

The program gives also extra possibilities:

Check the board status (check inputs and outputs)

Enable the Request Service Counter (Limited number of movements over which is required the

intervention of the maintainer for restarting the elevator )

Introduction and modification of Login Passwords for the Main Board and the Program Lift232


Main board connection with the program

RS232Port Power

Supply12Vdc


Main board connection with the program

Usb to serial 9 pin sub-D male cable

Serial null modem cable 9pin sub-D fem - fem

PC USB PortBoard RS232

Port


Program Home Screen


Lift232 Submenus Expanded

File Edit View Port Tools Options Help


Normal Control Mode

Serial Control Mode

Tools > Setup Board


Normal Control Mode

Check for Board and Program Version

*** STAMTEC – ZERO MAX ***LF2061 V1.60I -B

for LF2050-5B*** Monitor and Control Program ***


Normal Control Mode

Check for Serial Communication (Car, Floors, Duplex)

Checking Cabine

Duplex Error

Cabine Found

Searching LIN2..

Floor 0

OK

Floor 1

OK

Floor 2

OK

Floor 3

OK

Floor 4

OK


Normal Control Mode

Additional Checks and Results

PHASE SEQUENCER

CAR PCB DISCON.

MOTOR THERMISTOR

SAFE INPUT OPEN

OVERLOAD

INVERTER REPORT

STOP SWITCH OPEN

2 PREFINALS OPEN

DOOR OPEN

OIL THERMISTOR

LIMIT SWITCH

OVERLOAD CLEARED

OIL THERMISTOR CLEARED

MOTOR THERMISTOR CLEARED

INVERTER REPORT CLEARED

Top PFinal Closed

PHOTO CELL CLOSED

1 PREFINAL CLOSED

0 floor

Lock Input Closed

Bus door Closed

STOP SWITCH CLOSED

DOOR CLOSED

SAFE INPUT CLOSED

PHASE SEQUENCER CLEARED

LIMIT SWITCH CLEARED

PHOTO CELL CLOSED

CAR PCB CONNECTED


Normal Control Mode

Check Real-Time Lift Motion

Next Stop : 1 floorDirection UpStarting Fast...Bottom PFinal ClosedCounter ClosedCounter OpenedCounter Closed1 floorCounter OpenedLand Stop ClosedDirection None


Normal Control Mode

Normal Control Commands


Normal Control Mode

Show Inputs Command (SHOWINPUTS)


Normal Control Mode

Show Active Errors Command (SHOWACTER)

*** ACTIVE ERRORS ***

PHASE SEQUENCER

LIMIT SWITCH

STOP SWITCH OPEN

DOOR OPEN

2 PREFINALS OPEN

OIL THERMISTOR

OVERLOAD

SAFE INPUT OPEN

MOTOR THERMISTOR

CAR PCB DISCON.


Normal Control Mode

Show Installation Errors Command (SHOWERINST)*** INSTALLATION ERRORS ***

0 Installation Errors

Car Call Execution Command (CARCALL)

CARCALL Χ


Serial Control Mode

Serial Control Commands


Tools > Setup Board


Tools > Setup BoardLIN BUS – Serial Setup


Tools > Setup BoardBasic Setup


Tools > Setup BoardStandard Timers


Tools > Setup BoardHydraulic Setup


Tools > Setup BoardAdvanced Setup


Log FileLog File Open /

CreationLog File View


Time StampsTime Stamp Activation and Period Setting

StamtecL i f t C o n t r o l P a n e l s

Stamtec - LIFTPLANET.netliftplanet.net/assets/uploads/files/cfb86-8a23d-stamtec-company... ·...

Documents

Transcript of Stamtec - LIFTPLANET.netliftplanet.net/assets/uploads/files/cfb86-8a23d-stamtec-company... ·...