STAMPING PRESSES, ALLOY & STEEL WHEEL ......(#500B) 500 Ton Perry Hydraulic Press, Model...
Transcript of STAMPING PRESSES, ALLOY & STEEL WHEEL ......(#500B) 500 Ton Perry Hydraulic Press, Model...
In conjunction with
DUE TO THE CLOSURE OF
WWW.HILCOIND.COM
METALSA AUSTRALIA & ROH AUTOMOTIVE
STAMPING PRESSES, ALLOY & STEEL WHEEL MANUFACTURING LINES FOR SALE
Transfer Press Lines, Tandem Press Lines, Hydraulic Presses, C - Frame Presses, Alloy Wheel Manufacturing Line, Steel Wheel- & Rim Manufacturing Lines
PRIVATE TREATY SALE
TRANSFERROTEM - 1500 TON
PRESS• 1.500 Ton HYUNDAI ROTEM, • TRANSFER PRESS, • Model S4-1500-610 x 245, • Year of Mfg. 2005
Hyundai 1500 Ton single action, four point’s eccentric gear drive mechanical press, with two rear exited motion moving bolsters. Year 2005. Model S4-1500-610 x 245 with speed control between 15-30 spm. Pneumatically activated combination type dry clutch & brake. Bolster Area 6100 x 2450mm. 415 volts, 50 Hz 3 phrase power supply.
Transfer System: Gudel gull-wing (GW-342) TRI - AXIS system con-sists of two modular units, each having 3 electric servo drives that are mounted onto the press up-rights. The gull-wing and BDS-1 De-stacker are fully programmable units that have independent servo drives for each motion. (Lift, clamp and pitch).
YOM2005
2 3For more information, visit: www.hilcoind.com or www.graysonline.com For more information, visit: www.hilcoind.com or www.graysonline.com
YOM2006
• 1.000 Ton JIER, • TRANSFER PRESS, • Model S4-1000-6100 x 2450, • Year of Mfg. 2006
1000 Ton single action, four point’s eccentric gear drive mechanical press, with two front/rear exited motion moving bolsters. Year 2006.Blank and coil feeder (CCL-S3-1300), with Gudel gull-wing (GW-342) TRI system.
Description: Gudel gull-wing (GW-342) TRI - AXIS system consists of two modular units, each having 3 electric servo-drives that are mounted onto the press uprights. The gull-wing and BDS-1 De-stacker are fully programmable units that have independent servo drives for each motion. (Lift, clamp and pitch).
TRANSFER
PRESSJIER - 1000 TON
4 5For more information, visit: www.hilcoind.com or www.graysonline.com For more information, visit: www.hilcoind.com or www.graysonline.com
TRANSFERT1- 7 SYSTEM
PRESSES
PRESS
SHUT HEIGHT (mm)
STROKEOF
PRESS (mm)
STROKEPER
MINUTE (SPM)
Machine Speed
AREA (mm)
MAX MINSLIDE ADJ
StandardShut
Height+0.0/2.0
SLIDERLxFB
BOLSTERRLxFB
3x260T TRANS
500 380 120 440 2507.5 with transfer
950x700 1500x840
4x200T TRANS
470 360 110 440 2507.5 with transfer
800x650 1400x840
CUSHION (mm) FEED DETAILS
COIL FEEDERWxT
PITCAPACITY PIN DIA
CUSHION UP TO
BOLSTER TOP
TRAVEL DIRECTIONFEED
HEIGHT(mm)
FEED TYPR COIL/BANK
14T 30 Ø 189.7 10050 v-travel 70 v-travel Front-Back
240 COIL Press Shop NO
14T 30 Ø 189.7 100 n/a n/a n/a NO
YOM1996
6 7For more information, visit: www.hilcoind.com or www.graysonline.com For more information, visit: www.hilcoind.com or www.graysonline.com
TRANSFERT2- 7 SYSTEM
PRESSES
7 press transfer system with 3 x 260 Ton press Chin Fong (model OCP 260N) and 4 x 200 Ton press Chin Fong (model GI-200)
Coil Feeder model Tomac TLF3-800
YOM1998
8 9For more information, visit: www.hilcoind.com or www.graysonline.com For more information, visit: www.hilcoind.com or www.graysonline.com
YOM1998
TWO MECHANICAL
PRESSES• 600 Ton SEYI Double Sided mechanical Press,• Model SAG 600, Serial No. D 600-006,• Year of Mfg. 1998
SEYI - 600 TON
(#500A) 500 Ton WILKINS & MITCHELL, Mechanical Drawing Press
(#500B) 500 Ton Perry Hydraulic Press, Model HD-500-78-54,
Serial No. D 600-006
(#500C,D) 500 Ton Tandem Press Line, Bliss & Wilkins/Mitchell Press Line, Bliss & Wilkins/Mitchell
FRONT REAR
MECHANICAL, HYDRAULIC, TANDEM
PRESSES500 TON
10 11For more information, visit: www.hilcoind.com or www.graysonline.com For more information, visit: www.hilcoind.com or www.graysonline.com
CUSHION (mm) FEED DETAILS
COIL FEEDERWxT
PITCAPACITY PIN DIA
CUSHION UP TO
BOLSTER TOP
TRAVEL DIRECTIONFEED
HEIGHT(mm)
FEED TYPR COIL/BANK
3x60T 40 Ø N/A 200 L-R340 from subplate
COIL 600x6.0 YES
MA
KER
SHUT HEIGHT (mm)
STR
OK
EO
F P
RES
S (m
m)
STR
OK
EO
F P
RES
S M
INU
TE
(SP
M)
AREA (mm)
MA
X
MIN
SLI
DE
AD
J
Sta
ndar
dS
hut
Hei
ght
+0
.0/
2.0
SLIDERLxFB
BOLSTERRLxFB
SEYITranferPress
800 550 250
700 w/oSubplate560 withSubplate
460 12-22 3400x15503400x1550
3400v6100x2450
230 TON + 200 TONMECHANICAL
PRESSES
TWO MECHANICAL400 TON
PRESSES
(#400B) 400 Ton Wilkins Mitchel Mechanical Press
(#400A) 400 Ton Wilkins Mitchel Clearing Vickers Armstrong Press
(#200B) 200 Ton Bliss Mechanical Press, Model S1-200-36-36
12 13For more information, visit: www.hilcoind.com or www.graysonline.com For more information, visit: www.hilcoind.com or www.graysonline.com
180 TONMECHANICAL
PRESS
14 15For more information, visit: www.hilcoind.com or www.graysonline.com For more information, visit: www.hilcoind.com or www.graysonline.com
STAMPING
PRESSES800 -750 - 500 - 300 TON
US Industries 500/800 Ton
Wilkins & Mitchell 350/750 Ton
US Industries 300/500 Ton
Bliss 75/300 Ton
Passenger Car Rim
Melt ShopAncillary equipment
& Resources
Testing Laboratory
Pre-treatment, e-coating &Baking Line
(3) Low Pressure Die-Casting Cell
Heat Treatment Trolley Loading Cell
Conveyorised Paintline
22.5” Tubeless Truck Rim & Assembly Line
16 17For more information, visit: www.hilcoind.com or www.graysonline.com For more information, visit: www.hilcoind.com or www.graysonline.com
WWW.AUSTRALIA-AUTOMOTIVE.COM
Cristina Mihalea+ 31 (0)20 470 0989 [email protected]
Logan Fenemor+ 61 410082 [email protected]
DUE TO THE CLOSURE OF
- METALSA CHELTENHAM,VIC. MELBOURNE) AUSTRALIA
- ROH AUTOMOTIVE
SALE CONTACT