Edge Lock Design For Superior Impressions

U2 Large UpperItem #: 1170-02

U4 Small UpperItem #: 1170-04

U5 X-Small UpperItem #: 1170-05

L1 X-Large LowerItem #: 1170-11

L2 Large LowerItem #: 1170-12

L3 Medium LowerItem #: 1170-13

L4 Small LowerItem #: 1170-14

L5 X-Small LowerItem #: 1170-15

Stainless Steel Impression Trays

U3 Medium UpperItem #: 1170-03

U1 X-Large UpperItem #: 1170-01

Upper

• Perforated to ensure secure alginate retention• Edge-locking• Resists tarnishing

• Surgical grade stainless steel• Withstands repeated sterilization• Heat sterilizable up to 370°F/188°C

Perforated Design

Lower

• Aluminum foil between two layers of soft wax

• Adapts to patient’s arch

Laminated Bite Wafers

Impression Trays1 per pack

Item #: 600-02484 per pack

133

Imp

ressionsIMPRESSION SUPPLIES

133

More Perforation Additional security alginate retention

Numbered and Color Coded

Fast and easy identification

Retention Rim Ensures secure

alginate retention

Beveled Perforation Ensures secure alginate retention

without the use of spray adhesive

Smooth Rounded Edges For maximum patient comfort

More Ergonomically Contoured For maximum patient comfort

Additional BenefitOrtho Technology manufactures the DuraLock PLUS Impression Tray to be either disposable or cold sterilizable.

50 per pack (upper or lower)

DuraLock® PLUSIntroductory KitItem #: 501-00060x trays, 5x trays of each size upper and lower

DuraLock® PLUSIndividual Packs

The Ideal Depth Designed to capture the maximum detail

Longer Handle For easy and secure handling

© 2018 Ortho Technology, Inc. DuraLock is a registered trademark of Ortho Technology. U.S. Patent Numbers D565185 and D571473.

Color Code: RedUpper ........................................501-001ULower ........................................ 501-001L

Color Code: OrangeUpper ........................................501-002ULower ........................................ 501-002L

Color Code: BlueUpper .......................................501-003ULower ....................................... 501-003L

(1) Pedo (2) Extra Small (3) Small

Occlusal Bite Stop Helps to prevent

bite-through of material

134

Imp

ress

ions

IMPRESSION SUPPLIES

Color Code: GreenUpper ...................................... 501-004ULower .......................................501-004L

Color Code: YellowUpper ........................................501-005ULower ........................................ 501-005L

Color Code: PurpleUpper ........................................501-006ULower ........................................ 501-006L

Not Your Ordinary Impression Tray!

No Adhesive NeededUsing DuraLock PLUS trays save time. By eliminating the extra steps of coating the tray with adhesive and waiting for it to dry, the impression process is simplified and accelerated.

Largest Variety of Tray Sizes DuraLock PLUS trays eliminate inadequate coverage and/or tissue impingement and ensure an accurate fit every time by offering more size choices than competing trays.

Stability and DurabilityThe reliable strength and stability of DuraLock PLUS trays eliminate impression distortion and/or impression materials pulling away from the tray sides.

(4) Medium (5) Large (6) Extra Large

Superior Alginate Retention with No Adhesive Spray Needed!

135

Imp

ressionsIMPRESSION SUPPLIES

ground shipment recommended when ordering by the case

• Extra-rapid working and setting times• Total setting time: 1 minute 50 seconds• Vanilla flavor – works with alginate

flavors too• Modified atmosphere packaging ensures

product stability – 5 year guarantee• Thixotropic, non-drip, and highly elastic• Dust free• Gluten free

1.1 lb (500 gm) BagItem #: 3021451x bag per pack (12 bags = 1 case)

1.1 lb (500 gm) CanisterItem #: 3021601x 1.1 lb bag of alginate in canister,1x scoop and 1x vial(10 canisters = 1 case)

Measuring SetItem #: 1051821x scoop and 1x vial

Orthoprint®

Fast Set Alginate

Mixing Time

30 Seconds

Working Time

1 Minute

5 Seconds

Time in Mouth

45 Seconds

Total Set Time

1 Minute

50 Seconds

ground shipment recommended when ordering 20 or more bags/canisters

Kromopan®

Chromatic Alginate

1 lb (454 gm) BagItem #: KRO-100-P1x bag per pack (20 bags = 1 case)

1 lb (454 gm) CanisterItem #: KRO-100-C1x canister, 1x powder scoop and 1x water vial

Scoop and VialItem #: KRO-100-SV1x scoop, 1x vial

Allows casting of plaster up to 168 hours after the setting of the impression. Gluten free.

VioletMixing Time

45 Seconds

PinkWorking Time

60 Seconds

WhiteTotal Set Time

3 Minutes

136

Imp

ress

ions

IMPRESSION SUPPLIES

EXAFAST™ NDS Injection Wash

Injection Type MaterialItem #: 1371072x 48 mL cartridges (96 mL total) 6x mixing tips and instructions

EXAFAST™ NDS Heavy Body

EXAFAST™ NDS Regular WashEXAFAST™ NDS Monophase

• Single phase technique with one viscosity • Easy to syringe with enough

compression to obtain accurate impressions

• Non-slumping, high compression tray material used with double phase impressions

• Stabilizes the tray and prevents distortion • Pushes the wash material into the gingival margins for accuracy

• Syringeable wash material for double phase impressions

• Thinner wash that is a less thixotropic and more flowable

• Stays in place as pressure is applied to capture critical detail

Regular Wash MaterialItem #: 1370072x 48 mL cartridges (96 mL total) 6x mixing tips and instructions

Mixing Tips Type 2S - PinkItem #: 153148«48 per pack, injection material

Intraoral Tips - For Wash Material Item #: 150100«100 per pack, intraoral material(Shown above)

Mixing Tips Type 2L - AquaItem #: 153248«48 per pack, regular material

Intraoral Tips - For Wash Material Item #: 150100100 per pack, intraoral material

• Slightly thicker wash material used with double phase impressions

• Syringeable wash that is a little more thixotropic and less runny than injection material

• Stays in place until pressure is applied to capture critical detail

Fast Setting PVSImpression Material

Perfect for Clear Aligners

Monophase MaterialItem #: 1374072x 48 mL cartridges (96 mL total) 6x mixing tips and instructions

Mixing TipsType 2LL - PurpleItem #: 153048«48 per pack, mono/heavy body

Cartridge Dispenser • For all NDS impression material Item #: 152101«1x per pack(Shown on page 138)

«Available by special order. Additional shipping time may be required.

Mixing Tips Type 2LL - PurpleItem #: 153048«48 per pack, mono/heavy body

Heavy Body MaterialItem #: 1372072x 48 mL cartridges (96 mL total) 6x mixing tips and instructions

Orthoprint®

Fast Set Alginate

Kromopan®

Chromatic Alginate

137

Imp

ressionsIMPRESSION SUPPLIES

• Bite registration material is easy to apply and will not slump or run

• Ideal cream-like consistency allows patients to occlude without deviation or distortion

• Sets quickly in only 45 seconds and is easy to trim if necessary

Mixing Tips Type 2L - AquaItem #: 15324848 per pack

• The highest compression tray material used with double phase impressions

• Extremely smooth and easy to hand mix. Avoid contact with latex, oils and moisture when mixing

• Sets after only 2¹∕4 minutes in the mouth• 45 second working time

EXAFAST Putty is a vinyl polysiloxane material, consisting of a base and a catalyst that are easy to manipulate for accurate, void-free impressions. EXAFAST Putty produces crisp, extraordinarily smooth, precise impressions and can be used with either regular or injection wash material.

EXAFAST™ Putty

Easy to Mix & Use

Putty Standard PackItem #: 1373071x jar putty base (287 mL), 1x jar putty catalyst (287 mL), 2x scoops and instructions

1:1 Base and Catalyst Ratio

Hand Mix and Place in Impression Tray

PVS Bite Registration Material with Outstanding Accuracy

EXABITE™ II NDS Registration

« Available by special order. Additional shipping time may be required.

GC America Cartridge Dispenser Type 2 NDS

Item #: 152101«1 per pack

Bite Registration MaterialItem #: 1324122x 48 mL cartridges (96 mL total) 12x mixing tips and instructions

138

Imp

ress

ions

IMPRESSION SUPPLIES

© 2018 Ortho Technology, Inc. Tastes Great is a trademark of Ortho Technology.

Alginate Flavoring Organizer Item #: OT-AFC10 5/8"W x 6 5/8"H x 3"D1 per pack

Alginate Flavorings2 fl oz per bottle1 per pack

Encourages patient cooperation while reducing gagging, 100% Gluten Free

Make Impression Taking More Pleasurable

Tastes Great™

Alginate Flavoringsto Choose From19

o Very Very Strawberry ..... 250-101o Marvelous Mint .............. 250-102o Chillin’ Cherry ................ 250-103o Bubble Gum ................... 250-104o Groovy Grape ................. 250-105o Frosty Rootbeer ............. 250-106o Rowdy Raspberry ........... 250-107o Alotta Piña Colada .......... 250-108o Cosmic Orange .............. 251-101o Ballistic Blueberry ........... 251-103

o Classic Cola ................... 251-104o Bodacious Banana .......... 251-106o Fantastic Fruit Punch ...... 251-108o Rich Milk Chocolate........ 251-109o Wet n’ Wild Watermelon .. 251-110o Cotton Candy ................. 250-113 o Cookie Dough ................ 251-111o Orange Dreamsicle ......... 251-114o French Vanilla ................. 251-115

139

Imp

ressionsIMPRESSION SUPPLIES

Front Loading StyleUse for Active Cases

• Inexpensive storage• Easy to assemble• Super strong construction• Made in the USA

Ortho Technology’s Ortho Model™ Archival System offers offices an innovative and simple solution for archiving patient models, freeing up valuable office space.

Each set includes:4 boxes with 4 trays each, for a total of 16 trays. Each tray has 20 model compartments, for a total of 320 model compartments per set.

Ideal Storage

4 Boxes Per Set

© 2018 Ortho Technology, Inc. Ortho Model is a trademark of Ortho Technology.

Top LoadingItem #: 378101 set of 4 large boxes (16 trays)Dimensions: 15"H x 19 1/2 "W x 13 1/4 "D

Front LoadingItem #: 378091 set of 4 large boxes (16 trays)Dimensions: 16"H x 18 3/4 "W x 13"D

Top Loading StyleUse for Archive Cases

ground shipment recommended due to weight

Let plaster/stone fully set. Then pop out non-sticky Wonderfill for a clean model, using only water & brush to remove any residue.

Wonderfill™ Tongue FillerItem #: 302002.5 lbs (40 oz) per canister,1 per pack

1Remove a palm full of non-toxic Wonderfill and form a domed bridge in the tongue area.

Easy to UseTime Saver!No Mixing. No Mess.

No Wasted Time.

3Up to20minutes

Faster!

STO

NE/

PLA

STER

ALG

INA

TE

ground shipment recommended when ordering by the case

the EZ in, EZ out

tongue filler

With Wonderfill in the tongue area,

pour plaster/stone.

2

ALGINATE

Saves Time!Produces a sleeker, more presentation-worthy model!

• Mixing • Messy • Hard to form• Set-up and clean-up time required• Often needs carve-out of residue

Residue when notongue filler used

PLASTER/STONE• Tedious, time consuming grinding

out of build up• Messy • Coarse model appearance

Residue when notongue filler used

As the tongue filler

Each Set Holds Up to 320 Models

Save Valuable Office Space!

140

Imp

ress

ions

IMPRESSION SUPPLIES