Stainless steel centrifugal pumps · centrifugal pumps he Packo pump series 6 includes the pump...
Transcript of Stainless steel centrifugal pumps · centrifugal pumps he Packo pump series 6 includes the pump...
FOR GENERAL AND PROCESSING INDUSTRIES
Stainless steel centrifugal pumps
he Packo pump series 6 includes the pump types:
63, 66 and 68 with capacities ranging from 0,55
till 2,2 kW. They are available in 2 versions FP
for the food industries and NP for the processing
industries.
Derived from the FP and NP models are the CRP
series of airhandling pumps. These comprise the
same component parts with a different pump casing.
The pumps are close coupled to an IEC standard
motor.
T
met afloop
CRP
NP
FP6
CRP6
NP6
FP6
NP6
CRP6
FP
MATERIALS AISI 316 L ELECTROLYTICALLY POLISHEDStandard practice on all Packo pumps resulting
in:
- Improved hygiene.
- Smoother finish for easier cleaning; greater
efficiency.
- More resistant to corrosion and errosion
attack thanks to the higher concentrations
of chromium and nickel at the surface and
the total absence of micro-deformities which
linishing or glass-blasting can cause
Linished 240 grit
Glass-blastedElectropolished
PACKO PUMP
OPEN IMPELLER- Non clogging.
- Excellent air handling.
- Simple to clean (spring is not in
contact with the liquid for FP).
OTHER PUMP
OTHER PUMP
Functionally designed
2013/Eng (72698A)
X 400
PACKO INOX NV – BRANCH DIKSMUIDEIndustriepark HeernisseCardijnlaan 10 Tel.: (+ 32) (0) 51 51 92 80B-8600 Diksmuide (Belgium) Fax: (+ 32) (0) 51 51 92 99E-mail: [email protected] http://www.packopumps.com
the total absence of micro-deformities which
Electropolished
X 400
CRP: CIP return pump - Scavenge pump
The CRP pump consists of the same components as the FP. Only the pump casing is different, i.e. the same impeller, the same seals, etc.