Stability Analysis of Anchored Rock Slopes Against Plane Failure
Stability of slopes
-
Upload
samirsinh-parmar -
Category
Engineering
-
view
3.108 -
download
0
Transcript of Stability of slopes
![Page 1: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/1.jpg)
1
STABILITY OF SLOPES
Faculty: S.P.ParmarDepartment of Civil EngineeringFaculty of Technology, Dharmasinh Desai University,NadiadMail Add: [email protected]
![Page 2: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/2.jpg)
2
ANGLE OF REPOSE
![Page 3: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/3.jpg)
3
![Page 4: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/4.jpg)
4
THE AIMS OF SLOPE STABILITY ANALYSES ARE
To understand the development and form of natural slopes and the processes responsible for different natural features.
To assess the stability of slopes under short-term (often during construction) and long-term conditions.
To assess the possibility of landslides involving natural or existing engineered slopes.
To analyze landslides and to understand failure mechanisms and the influence of environmental factors.
To enable the redesign of failed slopes and the planning and design of preventive and remedial measures, where necessary.
To study the effect of seismic loadings on slopes and embankments.
![Page 5: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/5.jpg)
5
SLOPES OF EARTH ARE OF TWO TYPES
1. Natural slopes - slopes exist in hilly areas
2. Man made slopes - The sides of cuttings- - The slopes of embankments
constructed for roads railway lines, canals etc.
- The slopes of earth dams constructed for storing water.
![Page 6: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/6.jpg)
6
THE SLOPES WHETHER NATURAL OR ARTIFICIAL MAY BE 1. Infinite slopes - The term infinite slope is used to
designate a constant slope of infinite extent. - The long slope of the face of a mountain
2. Finite slopes - Finite slopes are limited in extent. - The slopes of embankments and earth
dams are examples of finite slopes.
![Page 7: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/7.jpg)
7
SLOPE STABILITY:
Design and construction of earth dams. Slope failure can often be catastrophic,
involving the loss of considerable property and many lives.
![Page 8: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/8.jpg)
8
CAUSES OF FAILURE OF SLOPES:
Gravitational force Force due to seepage water Erosion of the surface of slopes due to
flowing water The sudden lowering of water adjacent to a
slope Forces due to earthquakes
![Page 9: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/9.jpg)
9
CAUSES OF MASS MOVEMENTS
![Page 10: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/10.jpg)
10
What is the cause of movement?
![Page 11: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/11.jpg)
11
FORCES THAT ACT ON EARTH SLOPES
![Page 12: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/12.jpg)
12
FORCES THAT ACT ON EARTH SLOPES
![Page 13: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/13.jpg)
13
GENERAL CONSIDERATIONS AND ASSUMPTIONS IN THE ANALYSIS 1. Testing of samples to determine the
cohesion and angle of internal friction 2. The study of items which are known to
enter but which cannot be accounted for in the computations.
3. Computation
![Page 14: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/14.jpg)
14
Slope Stability
In general you have:• Driving Force – Weight of Slope• Resisting Force – Strength of soil along slip surface
Buttress at toe
W
c
![Page 15: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/15.jpg)
15
Slope Stability• In slope stability analysis we determine the Factor of Safety as a ratio of resisting forces to driving forces
Fs = Resisting / Driving
• Theoretically, any slope with a Factor of Safety less than one will fail and any slope with a factor of safety greater than one will not.
• Design focuses on the soil parameters and geometry that will provide the maximum factor of safety.
• Sometimes, the analysis of an existing slope will be what is called a parametric study – that is establishing a factor of safety and performing an analysis that back calculates the strength parameters.
• The engineer will then determine his/her confidence level as to whether or not the soil has that strength through experience, lab, and/or field data.
![Page 16: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/16.jpg)
16
THE SHEAR STRENGTH OF SOIL IS ASSUMED TO FOLLOW COULOMB'S LAW
![Page 17: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/17.jpg)
17
FACTOR OF SAFETY
1. Factor of safety with respect to shearing strength.
2. Factor of safety with respect to cohesion. This is termed the factor of safety with
respect to height.
![Page 18: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/18.jpg)
18
THE FACTOR OF SAFETY WITH RESPECT TO SHEARING STRENGTH, FS, MAY BE WRITTEN AS
![Page 19: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/19.jpg)
19
The shearing strength mobilized at each point on a failure surface may be written as
![Page 20: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/20.jpg)
20
STABILITY ANALYSIS OF INFINITE SLOPE IN SAND
![Page 21: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/21.jpg)
21
the slice is in equilibrium, the weight and reaction are equal in magnitude and opposite in direction.
They have a common line of action which passes through the centre of the base AB. The lateral forces must be equal and opposite
and their line of action must be parallel to the sloped surface.
The normal and shear stresses on plane AB are
![Page 22: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/22.jpg)
22
If full resistance is mobilized on plane AB, the shear strength, s, of the soil per Coulomb's law is
The factor of safety of infinite slopes in sand may be written as
![Page 23: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/23.jpg)
23
STABILITY ANALYSIS OF INFINITE SLOPES IN CLAY
The depth at which the shearing stress and shearing strength are equal is called the critical depth.
![Page 24: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/24.jpg)
24
EXPRESSION FOR THE STABILITY OF AN INFINITE SLOPE OF CLAY OF DEPTH H
the developed shearing stress as Under conditions of no seepage and no pore
pressure, the stress components on a plane at depth H and parallel to the surface of the slope are
Substituting these stress expressions in the equation above and simplifying, we have
![Page 25: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/25.jpg)
25
where H is the allowable height and the term c’m/ H is a dimensionless expression called the
stability number and is designated as Ns. This dimensionless number is proportional to the required cohesion and is inversely proportional to the allowable height.
If in Eq. (10.7) the factor of safety with respect to friction is unity, the stability number with respect to cohesion may be written as
![Page 26: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/26.jpg)
26
The stability number may be written as
![Page 27: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/27.jpg)
27
ANALYSIS OF INFINITE SLOPE WITH SEEPAGE FLOW THROUGH THE ENTIRE MASS
![Page 28: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/28.jpg)
28
if the factor of safety with respect to friction is unity, the stability number which represents the cohesion may be written as
![Page 29: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/29.jpg)
29
ANALYSIS OF INFINITE SLOPE WITH COMPLETELY SUBMERGED SLOPE
If the slope is completely submerged, and if there is no seepage as in Fig. then
where b = submerged unit weight of the soil.
![Page 30: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/30.jpg)
30
METHODS OF STABILITY ANALYSIS OF SLOPES OF
FINITE HEIGHT
![Page 31: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/31.jpg)
31
HISTORY
Petterson (1955) first applied the circle method to the analysis of a soil failure in connection with the failure of a quarry wall in Goeteberg, Sweden.
There are other methods of historic interest such as the Culmann method (1875) and the logarithmic spiral method (Rendulic (1935).
![Page 32: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/32.jpg)
32
PLANE SURFACE OF FAILURE
![Page 33: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/33.jpg)
33
Where, Hc is the critical height of the slope.
the allowable height of a slope is
![Page 34: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/34.jpg)
34
CIRCULAR SURFACES OF FAILURE
Slope failure Toe failure Base failure
![Page 35: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/35.jpg)
35
ROTATIONAL SLIDE
SLOPE FAILURE
![Page 36: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/36.jpg)
36
TOE FAILURE
BASE FAILURE
![Page 37: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/37.jpg)
37
FAILURE UNDER UNDRAINED CONDITIONS (U= 0)
![Page 38: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/38.jpg)
38
![Page 39: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/39.jpg)
39
![Page 40: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/40.jpg)
40
FRICTION-CIRCLE METHOD
The friction circle method of slopeanalysis is a convenient approach for both graphical and mathematical solutions.
![Page 41: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/41.jpg)
41
THE FORCES CONSIDERED IN THE ANALYSIS ARE
1.The total weight W of the mass above the trial circle acting through the centre of mass. The centre of mass may be determined by any one of the known methods.
2. The resultant boundary neutral force U. The vector U may be determined by a graphical
method from flow net construction. 3. The resultant intergranular force, P,
acting on the boundary. 4. The resultant cohesive force C.
![Page 42: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/42.jpg)
42
ACTUATING FORCES
![Page 43: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/43.jpg)
43
RESISTANT COHESIVE FORCES
![Page 44: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/44.jpg)
44
RESULTANT OF INTER-GRANULAR FORCES
![Page 45: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/45.jpg)
45
RELATIONSHIP BETWEEN K AND CENTRAL ANGLE ’
![Page 46: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/46.jpg)
46
TAYLOR'S STABILITY NUMBER
If the slope angle , height of embankment H, the effective unit weight of material , angle of internal friction ', and unit cohesion c' are known, the factor of safety may be determined.
Taylor (1937) conceived the idea of analyzing the stability of a large number of slopes through a wide range of slope angles and angles of internal friction, and then representing the results by an abstract number which he called the "stability number". This number is designated as Ns.
![Page 47: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/47.jpg)
47
![Page 48: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/48.jpg)
48
![Page 49: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/49.jpg)
49
TENSION CRACKS
If a dam is built of cohesive soil, tension cracks are usually present at the crest. The depth of such cracks may be computed from the equation
Where Zo = depth of crack, c' = unit cohesion, = unit weight of soil.
![Page 50: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/50.jpg)
50
TENSION CRACK IN DAMS BUILT OF COHESIVE SOILS
![Page 51: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/51.jpg)
51
STABILITY ANALYSIS BY METHOD OF SLICES FOR STEADY SEEPAG
![Page 52: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/52.jpg)
52
![Page 53: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/53.jpg)
53
![Page 54: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/54.jpg)
54
![Page 55: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/55.jpg)
55
FELLENIUS METHODFellenius found thatthe angle intersected at 0 in below for this case is about 133.5°.
![Page 56: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/56.jpg)
56
BISHOP'S SIMPLIFIED METHOD OF SLICES
![Page 57: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/57.jpg)
57
![Page 58: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/58.jpg)
58
VALUES OF M
![Page 59: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/59.jpg)
59
MORGENSTERN METHOD OF ANALYSIS FOR RAPID DRAWDOWN CONDITION
assumptions made in the analysis are 1. Simple slope of homogeneous material 2. The dam rests on an impermeable base 3. The slope is completely submerged
initially 4. The pore pressure does not dissipate
during drawdown
![Page 60: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/60.jpg)
60
Morgenstern used the pore pressure parameter B as developed by Skempton (1954) which states
The charts developed take into account the drawdown ratio which is defined as
where Rd = drawdown ratio H (bar) = height of drawdown H = height of dam
![Page 61: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/61.jpg)
61
DAM SECTION FOR DRAWDOWN CONDITIONS
![Page 62: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/62.jpg)
62
FACTOR OF SAFETY VS DRAWDOWN RATIO
![Page 63: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/63.jpg)
63
FACTOR OF SAFETY VS DRAWDOWN RATIO
![Page 64: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/64.jpg)
64
Stability conditions for an embankment slope over a clay foundation. (From Bishop and Bjerrum, 1960.)
![Page 65: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/65.jpg)
65
SLOPE FAILURE MECHANISM
![Page 66: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/66.jpg)
66
PROGRESSIVE FAILURE OF SLOPE
![Page 67: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/67.jpg)
67
![Page 68: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/68.jpg)
68
SLOPE FAILURE IMAGES FROM:
![Page 69: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/69.jpg)
69
![Page 70: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/70.jpg)
70
SLOPE FAILURE IMAGES FROM:
![Page 71: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/71.jpg)
71
SLOPE FAILURE IMAGES FROM:
![Page 72: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/72.jpg)
72
SLOPE FAILURE IMAGES FROM:
![Page 73: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/73.jpg)
73
SLOPE FAILURE IMAGES FROM:
![Page 74: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/74.jpg)
74
![Page 75: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/75.jpg)
75
SLOPE FAILURE IMAGES FROM:
![Page 76: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/76.jpg)
76
SLOPE FAILURE IMAGES FROM:
![Page 77: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/77.jpg)
77
SLOPE FAILURE IMAGES FROM:
![Page 78: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/78.jpg)
78
SLOPE FAILURE IMAGES FROM:
![Page 79: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/79.jpg)
79
SLOPE FAILURE IMAGES FROM:
![Page 80: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/80.jpg)
80
LANDSLIDE ON CUT SLOPE AFTER INTENSE RAINFALL, HAWAII KAI VALLEY
![Page 81: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/81.jpg)
81
LANDSLIDE IN TAIWAN
![Page 82: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/82.jpg)
82
SLOPE FAILURE IMAGES FROM:
![Page 83: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/83.jpg)
83
A LANDSLIDE IN SAINT-JUDE, QUE. IS SHOWN FROM THE AIR ON MAY 11, 2010.
![Page 84: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/84.jpg)
84
What to do ???
![Page 85: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/85.jpg)
85
MONITORING TECHNIQUES
Where is the location of slip surface?
![Page 86: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/86.jpg)
86
![Page 87: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/87.jpg)
87
![Page 88: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/88.jpg)
88
![Page 89: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/89.jpg)
89
![Page 90: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/90.jpg)
90
![Page 91: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/91.jpg)
91
![Page 92: Stability of slopes](https://reader035.fdocuments.net/reader035/viewer/2022062522/5873796a1a28ab3c1a8b6ef5/html5/thumbnails/92.jpg)
92
Thank You