SQ 1 INTELLIGENT STACKERS - Square 1 Design
7
SQ-1 INTELLIGENT STACKERS BR-SQ-STK-1704
Transcript of SQ 1 INTELLIGENT STACKERS - Square 1 Design
SQ-1 INTELLIGENT
STACKERS
BR-SQ-STK-1704
• Turn on the stacker system
• Set striker plate for proper stacking
• Conveyor system will feed truss down line until striker plate is contacted
• Stacker will begin cycle • Stacker arms will lift truss and stack
on top of pedestal • Arms will lower down, ready for
next truss • Manual operation included
• Vertically stacks trusses
• Available for both roof truss stacking and floor truss stacking
• Allows for easy banding
• Utilizes less yard space for inventory
• Provides easy transportation in yard
866-647-7771 [email protected] www.Square1Design.com
14’ 5 7/16”
17’
3 9
/16
”
31’ 2”
24’ 9
5/1
6”
24’ 9
5/1
6”
49’ 2”
SQ1-13 SQ1-30 SQ1-48
FLOOR TRUSS STACKER ROOF TRUSS STACKER ROOF TRUSS STACKER
PURPOSE
PROCEDURE
FOOTPRINT
Electrical Specifications
• Horsepower: 2.0
• Voltage: Amps
208 60 HZ 6
230 60 HZ 5.61
460 60 HZ 2.8
415 50 HZ 3.56
• Remote E-stops
• E-stop interlock for finish rollers
• Inductive sensors
• 12” touchscreen, (optional)
• Radio frequency controls (optional)
866-647-7771 [email protected] www.Square1Design.com
Mechanical Specifications
Machine Weight:
2-Ped 1,500 lbs.
3-Ped 2,000 lbs.
4-Ped 3,000 lbs.
Lift Capacity Stack Capacity
2-Ped 760 lbs. 10,000 lbs.
3-Ped 630 lbs. 10,000 lbs.
3-Ped 1,660 lbs. 10,000 lbs. (dual motor)
4-Ped 1,520 lbs. 12,000 lbs.
Length Capacity Height Capability
2-Ped 40’ 32”
3-Ped 50’ 14’
4-Ped 70’ 14’
Vertical Arm Length
2-Ped 48”
3-Ped 12’
4-Ped 8’ on ends & 12’ in middle
• Speed: 30-40 Seconds
• Operators Required: 1 required
• Support: Phone, Onsite ($), Online
(some models)
• Sealed bearings
• 4” drive tube
• 12 month warranty
• Customizations available
SPECIFICATIONS
• Stacker Control with Automatic Return:
Touchscreen PLC, Gearmotors with Brakes, Proximity Sensors, Con-tactors with Overloads, Automatic pedestal return, on screen diag-nostics for sensors, buttons & contacts, Field customizable, on screen truss counter
• SQ1 Intelligent Stacking Controls
Allows radio frequency control, Zone Stacking, opposing stacker op-erations, integration for conveyor controls, audible and visual aids
• Radio Frequency Controls:
Dual remotes (1 spare), Charging station, Up to 200’ line of sight range
• Remote mounted control panel
Manual Operator buttons, Automated Operator buttons
• 2” x 3” lift arms
• Physical truss stop, concrete mounted
• Physical truss stop, asphalt/gravel mounted
• Customizations available
866-647-7771 [email protected] www.Square1Design.com
OPTIONS
866-647-7771 [email protected] www.Square1Design.com
