Spray Booth Accessories - Auto Body Equipment And Supplies Retail
Transcript of Spray Booth Accessories - Auto Body Equipment And Supplies Retail
www.globalfinishing.com
Global Finishing Solutions
®
Spray Booth AccessoriesGFS' spray booth accessories are a new line of products developed to organize your spraying equipment.
> HeavyDuty
> ExceptionalQuality&Finish
> Removable—MagneticMounting
> StoresSupplieswithinArmsReach
> BeneficialtoAnySprayBooth
KarajenCorp.patentpendingonallproductslistedwithin.
SPRAY GUN WALL CABINET
All purpose, extremely sturdy, lockable,singledoorwallcabinetfor the storage of various materials, toolsandothersupplies.Includesan 8-position spray gun holding shelf andaflatshelfforspraygunparts and other painting supplies. The Door interior is equipped with 2 sets of sand paper sleeve holders (Padlock&MountingFastenersnotincluded).
20g steel- powder coated finish: 25"w, 25"h, 10"d.Approximately34lb.shippingweight 218-019 WallCabinet
BOOTHBOX MINITMPatentPending
A magnetic, single compartmentcabinetanddoublespraygunholder,designed for the interior of spraybooths. Increase efficiency andproductivity by storing your neededpainting items close at hand whenpainting.Avoidtripsinandoutoftheboothduringapaintjob!
20g steel- powder coated finish: 14"w, 7.25"h, 6"d.Approximately9lb.shippingweight 218-005BoothBoxMiniwithMountingFasteners 218-006BoothBoxMiniMagnetic
BOOTHBOX 2TM PatentPending
A magnetic, double compartmentcabinetanddoublespraygunholder,designed for the interior of spraybooths. Increase efficiency andproductivity while eliminating timewasting trips inandoutof thespraybooth.Storecommonlyusedsupplieswithinarmsreach.
20g steel- powder coated finish: 15"w, 14"h, 6.5"d.Approximately14lb.shippingweight 218-001BoothBox2withMountingHooks 218-002BoothBox2Magnetic
BOOTHBOXTM CORNER MOUNT PatentPending
Corner mounted paint booth cabinetwith 4 spray gun hangers attached.Mounts 1" away from wall to allowfor airflow. 2 removable shelves, 2removable doors and entire cabinetliftsoffofmountingbracketsforeasycleaning of cabinet and booth walls.Thiscornermountedcabinethelpstoeliminatetripsinandoutofthebooth,stores your commonly used suppliescloseathandwhenpainting.
18g steel- powder coated finish: 20"w, 18"h, 11.5"d.Approximately34lb.shippingweight 218-031BoothBoxCornerMountwithMountingBrackets
SPRAY BOOTH
SINGLE SPRAY GUNHANGERTM
AMagneticspraygunholder,designedtoholdalltypesofspraygunsandmosttypesofairtools.SoftEdgeguardtoeliminatescratchingofgunorguncup.
16gsteel-powdercoatedfinish:3"w,5"d.Approximately2lb.shippingweight
218-003 SingleSprayGunhangerwithMountingFasteners 218-004SingleSprayGunhangerMagnetic
4 GUNHANGERTM PatentPending
Amagnetic,4-Positionspraygunholderforspray booths, prep areas or anywhere inthe shop. Also works great in paint mixingrooms.Equippedwithatapeholdinghookforstoring tape, spray gun wrench and otherneededitems.
13g steel- powder coated finish: 7.5"w,18.75"h,7"d.Approximately7lb.shipweight.218-010 4-GunhangerwithMounting Fasteners
218-011 4-GunhangerMagnetic
HOSE & GUNHANGERTM PatentPending
A double spray gun holder and air hosehanger. Used for spray booths, prep areasor anywhere in the shop. Equipped with atapeholdinghook forstoring tapeorotherneededitems.
13g steel- powder coated finish: 7.5"w,18.75"h,7"d.Approximately7lb.shipweight.
218-012Hose&GunhangerwithMountingFasteners 218-013Hose&GunhangerMagnetic
Cabinetnotintendedforstorageofflammablematerials/notratedexplosionproof.
ACCESSORIES
KarajenCorp.patentpendingonallproductslistedwithin.
BOOTHSHELF WMTM PatentPending
A magnetic, 3-Position spray gun holderand vented working shelf combination.Use the BoothShelf WM™ anywhere inthe spray booth, mixing room or prepdeck toholdsprayguns, tape, tackclothandotherpaintingitemsforeasyaccesswhilepainting.
16g steel- powder coated finish: 14"w, 10"h, 8.5"d.Approximately8lb.shippingweight. 218-008BoothShelfWMwithMountingFasteners 218-009BoothShelfWMMagnetic
BOOTHSHELF CMTM PatentPending
Cornermounted(bolton)3-Positionspraygunhangerandventedworkingshelf.UsetheBoothShelfCM™inthecornerofyourspray booth, mixing room or prep decktoholdsprayguns,tackcloth,paintcupsetc,foreasyaccesswhilepainting.Works
greatasasmallmixingshelf.Equippedwithsoftedgeguardtoeliminatescratchingofgunorguncup.
16g steel- powder coated finish: 21"w, 12.5"d.Approximately5lb.shippingweight. 218-007BoothShelfCMwithMountingFasteners
TEST PANEL HOLDER™ PatentPending
SimplifyYourTestPanelProcess!Attach paper or metal test panels, holdand spray! For flash and dry times, oreveryday storage, place the Test PanelHolderontheboothwallorothersheetmetalsurfacebyitsmagnets.
218-023TestPanelHolderwithclipboard 218-024TestPanelHolderwithoutclipboard
TAPE BELT CLIPTM
HoldtapeatyoursidewhenmaskingwiththeTapeBeltClip™.Twosizesavailablethatwillholduptoone1½"tape,orone2"tape.
218-0211½"tapesizemax,withtoolholdingmagnet 218-0221½"tapesizemax,notoolholdingmagnet 218-0202"tapesizemax,notoolholdingmagnet
MAGAHOOKTM
Allpurposemagnetichooksthataregreatfortheshopand,industrialorhomeuse.TheMagahooks™areusefulinholdingavarietyofobjectstoametalsurfacesuchassprayboothwalls,partscaddys,lockers,toolboxes,warehouseracking,refrigeratorsandmuchmore!
AIR-PORTTM AIR BRUSH WORK STATION PatentPending
TheAIR-PORT,AirbrushWorkStationholds your needed Airbrushes,tools and supplies nearby while youperformyourartwork.TheAir-Port™isequippedwith3airbrushhangers.Itstoresmultiplecolorbottles, tape,
razorblades,utility knife,pencilsandmore.TheAIR-PORT™offerstwoconvenientmethodsofmounting:Magneticorwithmountingfasteners 218-027AIR-PORTAirbrushworkstationwithMounting Fasteners 218-028AIR-PORTAirbrushworkstation,Magnetic
SINGLE AIRBRUSH HANGERTM PatentPending
TheSingleAirbrushHangerattachestoawallmagnetically,orcanbeboltedpermanently.It will hang all styles of airbrushes. Itsadjustable positions accommodates for thevaryingtypesofairbrushes,shapesandfeed
types(gravity,siphon,sideloadetc.).Constructedofsolid18gaugesteel,itisdesignedforlonglastingdurability. 218-030SingleAirbrushHangerwithMountingFasteners 218-029SingleAirbrushHanger:Magnetic
(800)848-8738
CAUTION:Eachofthemagneticproductsareequippedwithhighlypowerfulmagnetsthatwillperformthetask(s)intendedfor.Alwaysusecautionwithanymagneticproduct.Keepfingers,andotherimportantbodyparts,awayfromthepathofmagnetic/metalcontact!Neveruseanymagneticaccessoryonornearcomputerequipment.
218-014MAGAHOOK™
218-015MAGAHOOK™'U'STYLE
218-016MINIMAGAHOOK™
218-017MINIMAGAHOOK™'U'Style
2.65"Base,3"Shaft,65lbpull
2.65"Base,softcoatedhook,65lbpull
1.42"Base,noncreasingclip,16lbpull
1.42"Base,16lbpull
KarajenCorp.patentpendingonallproductslistedwithin.
PARTS & FILTERS
®
Global Finishing Solutions • 800-848-8738 • [email protected], WI • Dallas, TX • Barrie, ON • Monterrey, MX
www.globalfinishing.com ©2007GlobalFinishingSolutions.AllRightsReserved.BOOTHACCESS07032007
GFS’questforproductqualityandperformancehasresultedinafulllineofaccessoriesthathavebeendesignedandmanufacturedfordurabilityandlonglasting,trouble-freeservice.GreatemphasisisplacedonourengineeringandworkmanshipsothatGFScustomerswillreceivethebestproductsatcompetitiveprices.
Approved Replacement Parts and FiltersGFSisalsoyourapprovedfull-linesupplierforPartsandFiltersfor:
>BinksBooths
>DeVilbissBooths
>JBIBooths&Ovens
>Blu-SurfSystems
>MilbanksSystems
>OtherSprayBoothManufacturers
ExhaustFans
ControlPanelsDuctwork
Filters
• Filters(allMakes&Models)
• ElectricalComponents
•OvenComponents
• Lighting
•Motors
• Fans
• ExhaustDuctwork
•Doors
•GratesandPans
•Panels
• FilterRacks
• Insulation
•Hardware
•OtherMiscellaneous
Full Service Parts and Filters Department
FluorescentLightFixtures
Contact GFS for your local distributor!