SpO2 Probe Identi er Equipment for the way you operate · SpO2 Probe Identi er Equipment for the...
1
Equipment for the way you operate SpO2 Probe Identifier 1800 Williamson Ct. • Louisville, Kentucky 40223 USA 800-477-2006 • 502-244-4444 • FAX: 502-244-0369 www.dremed.com Digital SpO2 Monitors - 2 Keyway Guides; 5 pin connector Analog or Nellcor SpO2 Monitors - 1 Keyway Guide; 6 pins Analog or Nellcor SpO2 - Once the monitor has been turned on and shows the main operating screen - Press Setup - Press Factory Password - Type in (SPO2.....) you are required to fill the rest of the empty spaces in with periods - Then exit to main operating screen - Open SpO2 menu - Press Factory Button - It will either read Nellcor or - BCI (Analog) - Please inform your sales rep if you have Nellcor or Analog
Transcript of SpO2 Probe Identi er Equipment for the way you operate · SpO2 Probe Identi er Equipment for the...
Equipment for the way you operateSpO2 Probe Identifier
1800 Williamson Ct. • Louisville, Kentucky 40223 USA800-477-2006 • 502-244-4444 • FAX: 502-244-0369 www.dremed.com
Digital Spo2 Monitors -- 2 Keyway Guides; 5 pin connector
Analog or Nellcor Spo2 Monitors – 1 Keyway Guide; 6 pins
- See below for determining which type you have
Analog or Nellcor Spo2
- Once the monitor has been turned on & shows the main opera ng screen
- Press Setup - Press Factory Password - Type in (SPO2…..) you are required to fill the
rest of the empty spaces in with periods - Then exit to main op ng screen - Open spo2 menu - Press Factory Bu on
o It will either read Nellcor or BCI(Analog)
- Please inform your sales rep if you have Nellcor or Analog
Digital SpO2 Monitors - 2 Keyway Guides; 5 pin connector
Analog or Nellcor SpO2 Monitors - 1 Keyway Guide; 6 pins
Analog or Nellcor SpO2
- Once the monitor has been turned on and shows the main operating screen - Press Setup - Press Factory Password - Type in (SPO2.....) you are required to fill the rest of the empty spaces in with periods - Then exit to main operating screen - Open SpO2 menu - Press Factory Button - It will either read Nellcor or - BCI (Analog) - Please inform your sales rep if you have Nellcor or Analog
