SplitMountingAccessories PriceList SalvadorEscoda

2012Splits Mounting AccessoriesPrice List June

PRICE LIST - SPLIT MOUNTING ACCESSORIES. JUNE 2012SALVADOR ESCODA S.A.

Total or partial reproduction prohibited in any form unless prior consent is obtained from SALVADOR ESCODA, S.A.

All information (prices, photographs, dimensions, performance, characteristics) has been obtained from originaldocuments provided by manufacturers or estimated from reliable sources. SALVADOR ESCODA S.A. reserves theright to modify this information at any time without notice and takes no responsibility for any errors or omissions.

PRICES MAY CHANGE. PLEASE, CONTACT OUR COMMERCIAL DEPARTMENTFOR UPDATED PRICES BEFORE PLACING YOUR ORDER

Table of contents

01 BRACKETS FOR OUTDOOR UNITS “SOPORT-ESC” . . . . . . . . . . . 1 to 7TOUCH-UP PAINT FOR BRACKETS. . . . . . . . . . . . . . . . . . . . . . . . . . .7UNIVERSAL ADJUSTABLE FRAMEWORK "BIG FOOT" . . . . . . . . . . . . . 8ANTIVIBRATION WORKSURFACE ”SOPORTESC" . . . . . . . . . . . . . . . . 8FLOOR SUPPORTS FOR OUTDOOR UNIT “SOPORTESC” . . . . . . . . . . 9TAILOR-MADE BRACKETS ”SOPORTESC" . . . . . . . . . . . . . . . . . . . . 10ADJUSTABLE EQUIPMENT FOR INSTALLATION OF UNITS . . . . . . . . 12

02 BOLTS FOR SPLIT ASSEMBLY «ESCOFIJ» . . . . . . . . . . . . . . . . . . . . 11BICOMPONENT CHEMICAL ANCORAGE . . . . . . . . . . . . . . . . . . . . . . 12BEAM CLAM CASTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12ENLARGER / SPREADABLE HOSE . . . . . . . . . . . . . . . . . . . . . . . . . .12FIXING SYSTEMS FOR DRAINAGE CHANNELS . . . . . . . . . . . . . . . . . 13"GRIPPLE" HANGER UNITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14SPLITS ASSEMBLY BAGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

03 COVERING DUCTS “ESC-CONDUCT”. . . . . . . . . . . . . . 16 to 19 and 22FIXING SYSTEMS FOR DUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19DUCTS “FLUID-QUINT”. . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 and 21AESTHETIC FRONT DUCT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21GUTTER “ESCONDUCT-CLIP” . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21INLET FOR FLAT ROOFS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22ANGULAR MITER CUTTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22EMBEDDED PRE-INSTALLATION BOXES . . . . . . . . . . . . . . . . 23 and 24CONDENSATE SIPHONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24STRAIGHT/CORRUGATED TUBE CONNECTOR . . . . . . . . . . . . . . . . . 29

04 CONDENSATION COLLECTING (TRAYS) . . . . . . . . . . . . . . . . . . . . . . 25CANS FOR CONDENSED FLUIDS . . . . . . . . . . . . . . . . . . . . . . . . . . .26ACOUSTIC CONTROLLER FOR CONDENSATE LEVEL . . . . . . . . . . . . 26DRAIN HOSE ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26DRAIN HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27RIGID DRAIN HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28RIGID DRAIN HOSE "WHITE" COLOUR WITH JUNCTION . . . . . . . . . . 29BAD ODORS VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30FIXING FOR DRAIN HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

06 CONDENSATION EVAPORATOR FOR OUTSIDE . . . . . . . . . . . . . . . . . 30CONDENSATE REMOVAL PUMPS “MUNDOCLIMA” . . . . 30, 38 and 40CONDENSATE REMOVAL PUMPS WITH TANK “ESCOCLIMA” . . . . . . 31CONDENSATE REMOVAL PUMPS “SICCOM” . . . . . . . . . . . . 31 and 35CONDENSATE REMOVAL PUMPS “ASPEN” . . . . . . . . . 31 and 36 to 38CONDENSATE REMOVAL PUMP WITH TANK “REFCO” . . . . . . . . . . . 31CONDENSATE REMOVAL PUMPS “SAUERMANN”. . . . . . . . . . 32 to 34CONDENSATE REMOVAL PUMPS “LITTLE GIANT” . . . . . . . . . . . . . . 39CONDENSATE REMOVAL PUMPS “BLUE DIAMOND” . . . . . . . . . . . . 41

07 ELECTRICAL ACCESSORIES "ESCOELECTRIC” . . . . . . . . . . . . 41 to 45ROTATIVE SWITCH FOR OUTSIDE USE. . . . . . . . . . . . . . . . . . . . . . . 46

11 SPLITS PROTECTION SYSTEMS (COVERS, CAGES, ETC.) . . . . . . . . 46

TF INSULATED AND LINED COPPER TUBE "ESCOFRED” . . . . . . . . . . . . 47COPPER TUBES IN ROLLS AND BARS . . . . . . . . . . . . . . . . . . . . . . . 48COPPER FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49BIMETAL PIPE FOR AIR CONDITIONING . . . . . . . . . . . . . . . . . . . . . . 50COUPLING CONNECTIONS FOR SPLITS . . . . . . . . . . . . . . . . . . . . . . 51TUBE IDENTIFICATION PLATES "ESCOFIX” . . . . . . . . . . . . . . . . . . . . 51UNIVERSAL DERIVATION SYS.& COLLECTORS FOR MULTI-SPLITS . 52WAY CHANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52SET DIVERSION-DISTRIBUTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . .53BRASS FITTINGS “SAE” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54BRACKETS FOR TUBES . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 and 56VALVES FOR SPLITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 and 57FIXING SYSTEMS FOR INSULATED PIPES. . . . . . . . . . . . . . . . . . . . . 61

ANTI-CONDENSATION TAPE FOR REFRIGERATION. . . . . . . . . . . . . . 61SILICONE SEALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

AI TUBULAR INSULATION M1 “ISOCELL”. . . . . . . . . . . . . . . . . . . . . . . 58ACCESSORIES (SELF-ADHESIVE TAPE, DISSOLVENT, PAINT). . . . . . 58SPANISH REGULATIONS (R.I.T.E.) ON COLD FLUIDS . . . . . . . . . . . . 59FLEXIBLE TUBULAR INSULATION “L'ISOLANTE K-FLEX” . . . . . . . . . 59ROLL OF TUBULAR INSULATION “FRIGO K-FLEX ST”. . . . . . . . . . . . 60INSULATION SHEETS “L'ISOLANTE K-FLEX”. . . . . . . . . . . . . . . . . . . 60ADHESIVE TAPES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60TAPE MEASURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

AV ANTIVIBRATION DAMPERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62RUBBER PADS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63ANTIVIBRATION RUBBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63CEILING RUBBER SUPPORTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63METAL ANTIVIBRATORS AND SHOCK ABSORBERS . . . . . . . . . . . . . 64

GF REFRIGERANT GASES FOR SPLITS . . . . . . . . . . . . . . . . . . . . 65 to 67SHUT-OFF VALVES FOR BOTTLES . . . . . . . . . . . . . . . . . . . . . . . . . .67OILS FOR COOLING SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

CF SPEED CONTROLS IN TERMSOF PRESSURE AND TEMPERATURE. . . . . . . . . . . . . . . . . . . . . . . . .68MINIATURE PRESSURE CONTROLS “ESCOFRED” . . . . . . . . . . . . . . 68FOUR-WAY VALVE FOR R-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

VF MUFFLERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69SOLDERING BALL VALVES-ODS. . . . . . . . . . . . . . . . . . . . . . . . . . . .69DRYER FILTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 to 72COPPER FILTERS FOR SMALL SYSTEMS "ESCOFRED" . . . . . . . . . . 72

MF COMPRESSORS “SCI-MITSUBISHI” . . . . . . . . . . . . . . . . . . . . 73 to 76STARTER CONDENSERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74COMPRESSORS “HITACHI” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77COMPRESSORS “SANYO” . . . . . . . . . . . . . . . . . . . . . . . . . .78 and 79EQUIVALENCES ROTATORY COMPRESSORS . . . . . . . . . . . . . . . . . . 80COMPRESSORS “MANEUROP”. . . . . . . . . . . . . . . . . . . . . . . . 81 to 83COMPRESSORS “BRISTOL” . . . . . . . . . . . . . . . . . . . . . . . . . .87 to 89COMPRESSORS «ASPERA-EMBRACO” . . . . . . . . . . . . . . . . . . . . . . 90COMPRESSORS “DWM COPELAND” . . . . . . . . . . . . . . . . . . . 91 to 95

HF TUBE CUTTING TOOLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 and 97SAWS FOR METALS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97PVC, PE, PVDF CUTTING PIPE PLIERS . . . . . . . . . . . . . . . . . . . . . . . 97FLARING TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 to 99FLARING AND EXPANDING TOOLS. . . . . . . . . . . . . . . . . . . . . . . . . .99REAMERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100TUBE BENDING TOOLS. . . . . . . . . . . . . . . . . . . . . . . . . . .100 and 101SERVICE TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 to 105CLEANING EQUIPMENTS FOR REFRIGERATION SYSTEMS . 106 to 108CLEANING EQUIPMENTS WITH NITROGEN/FLUSH. . . . . . . . . . . . . 108VACUUM PUMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109OIL FOR VACUUM PUMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109MANIFOLDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110MANIFOLD CASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111MANOMETERS AND VACUUM GAUGES . . . . . . . . . . . . . . 111 and 112SHUT-OFF VALVE FOR MANOMETERS . . . . . . . . . . . . . . . . . . . . . . 113RUBBER PROTECTOR FOR MANOMETERS . . . . . . . . . . . . . . . . . . 113DIGITAL MANOMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113VACUUM ELECTRONIC GAUGE . . . . . . . . . . . . . . . . . . . . . . . . . . .113CHARGING HOSES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114QUICK JOINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114TOOL CASES FOR REFRIGERATION “ESCOFRED”. . . . . . . 115 and 117MANÓMETRO TESTER PORTÁTIL . . . . . . . . . . . . . . . . . . . . . . . . .117

Page Page

Continued on next page

2-WAY DIGITAL MANIFOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117DIGITAL MANIFOLD “TESTO” . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118DIGITAL MANIFOLD “FOX” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119ELECTRONIC VACUUM AND CHARGING STATION . . . . . . . . . . . . . 119ELECTRONIC INDICATOR CHARGE UNIT . . . . . . . . . . . . . . . . . . . . 119CHARGING CYLINDER WITH TRANSPORT HANDLE . . . . . . . . . . . . 119DIGITAL CHARGING SCALES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120RECOVERY, REFILL AND RECYCLING EQUIPMENTS . . . . . . . . . . . 121WELDING EQUIPMENTS AND ACCESSORIES . . . . . . . . . . . 122 to 125CLEANING AND PROTECTION ACCESSORIES FOR WELDING . . . . 126LEAK DETECTORS OF REFRIGERANT GAS . . . . . . . . . . . . 127 and 128ULTRAVIOLET LEAK DETECTORS . . . . . . . . . . . . . . . . . . . 129 and 130OIL TRANSFER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131CHECK PUMP FOR WATER SYSTEMS . . . . . . . . . . . . . . . . . . . . . . 130IN-LINE INJECTION MACHINE . . . . . . . . . . . . . . . . . . . . . . . . . . . .130ANTIFREEZING FOR REFRIGERATION SYSTEMS. . . . . . . . . . . . . . . 131AIR FRESHENER TABLETS “CLIMAFRESH” . . . . . . . . . . . . . . . . . . 177

MA MAINTENANCE AND PROTECTION SPRAYS . . . . . . . . . . . . . . . . . . 131SMOKE GENERATOR FOR LEAK DETECTION . . . . . . . . . . . . . . . . . 131HIGH PRESSURE HYDROCLEANERS . . . . . . . . . . . . . . . . . . . . . . . 132ATOMIZERS FOR CLEANING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132PAINT STRIPPER KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133CLEANER FOR AIR CONDITIONERS . . . . . . . . . . . . . . . . . . . . . . . . 133DETERGENT FOR AIR CONDITIONER . . . . . . . . . . . . . . . . . . . . . . . 133CLEANING SYSTEMS “CARAMBA” . . . . . . . . . . . . . . . . . . . . . . . . .133SANITIZER GEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134ANTI-WASTEPIPE ODOURS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134CLEANER FOR FILTER AND FAN . . . . . . . . . . . . . . . . . . . . . . . . . . .134DEGREASER WITHOUT SODA . . . . . . . . . . . . . . . . . . . . . . . . . . . .134PLUNGER FOR TRAYS, TOILETS, ETC. . . . . . . . . . . . . . . . . . . . . . . 134"ESCOCRACK" PROFESSIONAL PLUNGER . . . . . . . . . . . . . . . . . . . 134COIL CLEANER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134DRYING LIQUID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134ANTILIME PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135AIR COMPRESSORS AND ACCESSORIES . . . . . . . . . . . . . . . . . . . 135GENERATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135SEALING FOR THREAD. . . . . . . . . . . . . . . . . . . . . . . . . . .136 and 137INSPECTION CHAMBER DUCTS AND MACHINERY. . . . . . . . . . . . . 137ELEVATORS AND LIFTS. . . . . . . . . . . . . . . . . . . . . . . . . . . .138 to 141LIFTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141FOLDABLE CART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142METAL DETECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 and 141INSPECTION MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131TELESCOPIC MAGNETISED BAR . . . . . . . . . . . . . . . . . . . . . . . . . .131OIL IDENTIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132LEAK SEALER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1432ACIDITY NEUTRALIZER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143WORK SPOTLIGHTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144WIRE ROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144WORKING BENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144DRAWERS FOR PILING UP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144VACUUM CLEANERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145LEVELS, MEASURING TAPE CALCULATORS, SQUARES. . . . . . . . . 145GRINDING MACHINES . . . . . . . . . . . . . . . . . . . . . . . . . . .146 and 145ELECTRIC TOOLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 and 147SAFETY EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

IM DIGITAL TEMPERATURE MEASUREMENT . . . . . . . . . . . . . . 149 to 151ANEMOMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 to 154HUMIDITY AND TEMPERATURE INDICATOR . . . . . . . . . . . . . . . . . . 154CLAMPMETERS AND MULTIMETERS . . . . . . . . . . . . . . . . 155 and 156DIGITAL THERMOMETER-HYGROMETERS . . . . . . . . . . . . 156 and 157TACHOMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157DISTANCE METER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157DIGITAL MANOMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

INTEGRATING SOUND LEVEL METER. . . . . . . . . . . . . . . . . . . . . . . 158ALKALINE BATTERIES (BLISTER) “MTPOWER” . . . . . . . . . . . . . . . 158

CA SUPERFLEXIBLE ALUMINIUM DUCT . . . . . . . . . . . . . . . . . . 159 to 161ELASTIC JOINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161FIXING OF FLEXIBLE TUBES TO FIBRE DUCT . . . . . . . . . . 162 and 163PRESSED FITTINGS FOR GALVANISED SHEET DUCT . . . . . . . . . . . 164REDUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165

CV VENTILATION BOXES AND ACCESSORIES “ESCOCLIMA” . 166 and 167

VE VENTILATION BOXES 400°C/2h “MUNDOFAN” . . . . . . . . . 168 and 169CENTRIFUGAL FANS LOW PRESSURE . . . . . . . . . . . . . . . . . . . . . . 171WALL-MOUNTED HELICOIDAL FANS . . . . . . . . . . . . . . . . . . . . . . . 171

VD DOMESTIC SERIES EXTRACTORS . . . . . . . . . . . . . . . . . . . . . . . . .170EXTRACTORS FOR INSERTING IN DUCT. . . . . . . . . . . . . . 171 and 172AUTOMATIC HAND DRYER “MUNDOFAN” . . . . . . . . . . . . . . . . . . . 251

KF AIR FILTRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172FILTER UNITS “ESCOCLIMA” SLIMFILTER. . . . . . . . . . . . . . . . . . . . 173FILTER UNITS “ESCOCLIMA” UF-STATION COMPACT . . . . . . . . . . . 174AIR PURIFIER "MUNDOCLIMA". . . . . . . . . . . . . . . . . . . . . . . . . . . .250AIR PURIFIER "MU-PUR 300". . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

RX “ESCOCLIMA” GRILLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175DIFFUSERS AND EXTRACTION VALVES . . . . . . . . . . . . . . . . . . . . . 176

CO UNIVERSAL REMOTE CONTROL FOR SPLITS “MUNDOCLIMA” . . . 177

CL AIR CONDITIONERS “MUNDOCLIMA”:MUNDOCLIMA PRICE LIST . . . . . . . . . . . . . . . . . . . . . . . . .180 to 185TECHNICAL INFORMATION:Window air conditioner MUV ECO2. . . . . . . . . . . . . . . . . . . . . . . . .186Wall split MUP-HK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187Wall split MUP-HJ “SILVER CRISTAL” . . . . . . . . . . . . . . . . . . . . . . . 188Wall-mounted multi-split 2x1 MUP . . . . . . . . . . . . . . . . . . . . . . . . .189Wall 1x1 inverter split MUPR-HG . . . . . . . . . . . . . . . . . . . . . . . . . .190Multi-inverter system 2x1, 3x1and 4x1 MUPR-HE . . . . . . 191 and 192Floor-ceiling air conditioner MU S/T HF. . . . . . . . . . . . . . . . . . . . . . 193Cassette split MUCS HF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194Cassette split MUCSR HF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195Free-standing split MUCO R410A . . . . . . . . . . . . . . . . . . . . . . . . . .196Duct split SUPER SLIM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197Duct split GRAN CAUDAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198Duct split MUC HF2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199 and 201Duct split inverter MUCR HF2 . . . . . . . . . . . . . . . . . . . . . . 200 and 201Centrifugal outdoor unit MUEC-HF . . . . . . . . . . . . . . . . . . . . . . . . .202VARIABLE DIGITAL SCROLL (MVD). . . . . . . . . . . . . . . . . . . 204 to 206Air conditioner without outdoor unit MU-WZ . . . . . . . . . . . . . . . . . . 207Air conditioner without outdoor unit MU-UNIC. . . . . . . . . . . . . . . . . 208Portable air conditioner monobloc MU-PO SuperEco II . . . . . . . . . . 209Portable air conditioner monobloc MU-PO Eco . . . . . . . . . . . . . . . . 210AIR CONDITIONERS “ESCOCLIMA”. . . . . . . . . . . . . . . . . . 211 and 212WATER CHILLERS “MUNDOCLIMA” . . . . . . . . . . . . . . . . . . 213 to 218ROOM FANCOILS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219 and 221WATER FANCOILS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222FANCOIL WITHOUT ENCLOSURE MUC-WF. . . . . . . . . . . . . . . . . . . 223ECO-OBRA TYPE FANCOIL W/ PLENUM AND FILTER WF2 . . . 224-225UNIVERSAL FANCOIL WF3 . . . . . . . . . . . . . . . . . . . . . . . . .226 a 229WALL FANCOIL MUP-WF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230FANCOIL CASSETTE MUCSW-HG . . . . . . . . . . . . . . . . . . . . . . . . .231HEAT RECOVERY UNITS “MUNDOCLIMA” . . . . . . . . . . . . . . 238 to 244

EC AIR CURTAINS “MUNDOCLIMA” . . . . . . . . . . . . . . . . . . . . . 232 to 237

HU DEHUMIDIFIERS “MUNDOCLIMA” . . . . . . . . . . . . . . . . . . . . . . . . .245EVAPORATIVE UNITS . . . . . . . . . . . . . . . . . . . . . . . . . . . .246 and 247OUTDOORS EVAPORATIVE UNIT . . . . . . . . . . . . . . . . . . . . . . . . . .248

CE WALL HEATERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249

Page Page

Soport-Esc Inox

01 BRACKETS FOR OUTDOOR UNITS

• REINFORCED Series

- Painted in ivory epoxy-polyester- Metal sheet 2 mm.- 3 drillings Ø11 wall fixing.- Corner reinforcement.- Supplied in single cardboard boxes.- Max. load: 150 kg

Code Item €

«SOPORT-ESC»

AS 01 001

AS 01 002

AS 01 003

AS 01 018

SMALL model «P»Pack 10+ pcs.

MEDIUM model «M»Pack 10+ pcs.

BIG model «G»Pack 10+ pcs.

SUPER model «S»Pack 10+ pcs.

15.1013.3016.1513.7517.2514.6517.8215.20

CARTON BOX «NEUTRAL»

AS 01 004

AS 01 005

AS 01 006

AS 01 019

SMALL model «PN»Pack 10+ pcs.

MEDIUM model «MN»Pack 10+ pcs.

BIG model «GN»Pack 10+ pcs.

SUPER model «SN»Pack 10+ pcs.

15.1013.3016.1513.7517.2514.6517.8215.20

STAINLESS «SOPORT-ESC»

AS 01 007AS 01 008AS 01 009

• Stainless sheet AISI-304 (1.5 mm)SMALL model «PI»MEDIUM model «MI»BIG model «GI»

57.2060.3866.75

• ECO Series

- Painted in ivory epoxy-polyester- Metal sheet 1.5 mm.- 3 drillings Ø11 wall fixing.- Supplied in individual cardboard box- Max. load: 80 kg

Code Item €

«SOPORT-ESC» ECO

AS 01 057 SMALL model 400Pack 10+ pcsPack 50+ pcsPack 100+ pcs

9.509.008.508.00

AS 01 058 MEDIUM model 450Pack 10+ pcsPack 50+ pcsPack 100+ pcs

10.009.559.008.50

AS 01 059 BIG model 500Pack 10+ pcsPack 50+ pcsPack 100+ pcs

10.6010.009.608.90

AS 01 504 SUPER model 550Pack 10+ pcs

12.3011.70

SALVADOR ESCODA S.A.® PRICE LISTwww.salvadorescoda.com CHECK LAST UPDATE

Provença, 392 2 floorTelephone n. +34 93 446 27 81Fax n. +34 93 446 27 9608025 BARCELONA (SPAIN)

nd

SPLITS MOUNTING ACCESSORIES 1

ONLY FORDEALERS

DIMENSIONS A B

Small 400 400

Medium 450 450

Big 500 500

Super 500 560

DIMENSIONS A B

Small 400 400

Medium 400 450

Big 500 500

Super 500 550

REINFORCED

Detail

ECO

SCSOPORT


• TANK brackets- Metal sheet 3 mm.- 4 drillings Ø11 wall fixing

Code Item €

AS 01 016

• Painted in ivory epoxy-polyester• Supply in single boxesTANK model «TA» 65.00

• Three positionbrackets

- Metal sheet 2 mm.- 3 drillings Ø11 wall fixing.- 3 positions assembly with2 screws and nuts.

- Max. load: 120 kg

Code Item €

AS 01 011

• Painted in ivory epoxy-polyester• Supply in cardboard boxesSMALL model «3PP»

Pack +10 pcs.11.9011.30

AS 01 012 MEDIUM model «3PM»Pack +10 pcs.

12.9012.25

AS 01 013 BIG model «3PG»Pack +10 pcs.

13.7513.00

• Inverted support

Code Item €

AS 01 065AS 01 066AS 01 067AS 01 068

• Painted in ivory epoxy-polyester• Supply in single boxesSMALL model 400MEDIUM model 450BIG model 500SUPER model 600

16.6017.7619.0019.60



nd

2 SPLITS MOUNTING ACCESSORIES

SCSOPORT

DIMENSIONS A B

Small 400 400

Medium 450 450

Big 500 500

700

90

650

DIMENS.mm A B

Small 400 400

Medium 450 450

Big 500 520

Super 500 560


• Outdoor unit bracket“FIX” FLAG TYPE

- Metal sheet 2 mm.- Painted in epoxy-polyester

Code Item €

AS 01 071AS 01 072

LONG model 900EXTRALONG model 1100

35.0041.00

• Outdoor unit bracket “TELESCOPIC” FLAG TYPE

Code Item €

AS 01 017 Flag type bracket 75.00

• Brackets with adjustable installation widthfor column

- Rail and support painted in ivory epoxy-polyester.- 2 galvanized and painted rail 32x20x2.5 mm.- Normal welded wall support.- 4 screws and galvanized nut.

Code Item €

AS 01 062AS 01 063AS 01 064

• Painted in ivory epoxy-polyester• Supply in single cardboard boxes• Includes adjustable rail with screws and 8 nutsMEDIUM model 450 rail 750BIG model 500 rail 850SUPER model 500 rail 1000

43.7848.8553.35

• Installation kit: brackets + accesoriesCode Item €

AS 01 510AS 01 509

• Kit folding bracket long. 400x400• Kit 4 shock absorbers with screws• Nogs for wall fixing• Insulated copper pipe 3 m with flared joint and nutAssembly kit 1/4"-3/8" (Splits up to 2800 W)Assembly kit 1/4"-3/8" (Splits up to 3200 W)

53.0060.30



nd


650 can be extended to 960

48070

0M10

DIMENSIONS A B CMedium 480 450 750Big 500 500 850Super 500 500 1000

L = width columnS = distance between fixing legs

L < Sless than

- Metal sheet 3 mm- Extensible- Width 95 mm

Pipe with flared joint and nut.Length 3m.INSULATED

+ +

Kit brackets

Antivibratorsand screw

DIMENS.mm A B

Long. 500 900Extralong 600 1100

SCSOPORT

A

B


• Reinforced polyamide plastic bracket

- Perfect for coastal areas and humid places- Working temperature: -30 to 60°C- Sunlight resistent (UV ray protection)- Does not need shock absorbers

Code Item €

AS 01 111 SMALL model 400 x 400Pack 10+ pcs.

15.5014.30

AS 01 113 BIG model 500 x 500Pack 10+ pcs.

18.6517.20

• Outdoor unit brackets with pattern

- Cream colourpolyesterEPOXY painted.

- Zinc-coatedsteel made.

Code Item €

STANDARD SERIES

AS 01 087

AS 01 088

• Includes 4 anti-vibrators with zinc-coated screwsto fix the equipment

SMALL model (Weight 50 + 50 kg)Length 400 mm with pattern 700 mmMEDIUM model (Weight 75 + 75 kg)Length 480 mm with pattern 850 mm

19.50

30.40

HEAVY SERIES

AS 01 089

• Identical to the previous one but withoutthe anti-vibrator bag

HEAVY model (Weight 200+ 200 kg)Length 560 mm with pattern 1000 mm 105.60

• Bracket with level and pattern

Code Item €

AS 01 125AS 01 126AS 01 123AS 01 127

• Painted in epoxy-polyester• Includes LEVEL, wall levels and

840 mm fixing patternSMALL model 400 mmMEDIUM model 450 mmBIG model 500 mmSUPER model 550 mm

15.2016.2017.5026.40



nd


SCSOPORT

DIMENSIONS A B C

Small 420 365 700

Medium 480 410 850

Big 556 560 1000

Mod.small andmedium

Mod.Heavy

C

B

A


• Bracket for wall corners

- Metal sheet 2 mm.- 2 drillings Ø10x110 machine fixing.- 2 drillings Ø11 wall fixing.- 1 central drilling Ø11 to avoid opening.- 1 drilling Ø11 for threaded bar pass of M10.

Code Item €

AS 01 031AS 01 032AS 01 033

• Painted in ivory epoxy-polyester• Single cardboard box• Angle with 2 drillings Ø11 mm.SMALL model (880 mm.)MEDIUM model (980 mm.)BIG model (1,080 mm.)

32.9035.8640.75

• T Bracket for windows

- Metal sheet 2 mm.- 2 drillings Ø10x110 fixing- 3 drillings Ø11 wall fixing.

Code Item €

AS 01 041AS 01 042AS 01 043

• Painted in ivory epoxy-polyester• Machine fixing drillingsSMALL modelMEDIUM modelBIG model

27.9030.5035.40

• Window hooktype

- Metal sheet 2 mm.- 2 drillings Ø10x110 fixing.- Adjustable stoppers made ofanti-vibratory rubber.

- 3 drillings Ø11 wall fixing.

Code Item €

AS 01 051AS 01 052AS 01 053

• Painted in ivory epoxy-polyester• Single cardboard box• Includes 2 regulation stoppers and a stay S-40SMALL model 400 x 575MEDIUM model 480 x 675BIG model 580 x 775

31.0032.5035.50



nd


DIMENSIONS A B

Small 400 155

Medium 460 220

Big 530 285

DIMENSIONS B F

Small 880 550

Medium 980 650

Big 1.080 750

DIMENSIONS A B F

Small 575 400 155

Medium 675 460 220

Big 775 520 285

SCSOPORT

01 OUTDOOR UNIT BRACKETS

• Adjustable ground brackets

Note: This support together withanti-vibrators S-40 (AV 01 020)allows to save any surfaceunevenness.

Code Item €

• Painted in ivory epoxy-polyester• Sheet 2 mm.• Cardboard box packing with set

HEIGHT 250 mm (A)

AS 01 081AS 01 082AS 01 083

SMALL modelMEDIUM modelBIG model

25.5026.7527.95

HEIGHT 400 mm (A)

AS 01 181AS 01 182AS 01 183

SMALL model 400 x 400 x 155MEDIUM model 400 x 460 x 220BIG model 400 x 520 x 285

31.2032.4033.60

• Supports type hassock- Painted in ivory epoxy-polyester- Sheet 2 mm.- Adjustable base width - length.- Supports up to 150 Kg

Code Item €

AS 01 037AS 01 038

• Includes anti-vibrators and galvanized boltfor unit assembly

SMALL model 380 mmMEDIUM model 480 mm

50.0052.00

• Bracket for ceilingequipment suspension

Code Item €

AS 01 025AS 01 026

• Painted in ivory epoxy-polyester• Adjustable widthMedium model «TRM»Big model «TRG»

53.5058.85

ROOF (OR SLOPINGSURFACE) BRACKET

Code Item €

AS 01 085

• To install on roofs or sloping surfaces• Adjustable angle for surface incline 10 to 28°• Adjustable length width: 400 to 1000 mm• Zinc-coated steel and polyester epoxy painted• Bag with bolt and shock-absorbers• 100 to 380 mm depthRoof or sloping surface universal support 69.68



nd


SCSOPORT

DIMENS. B F

Small 400 155

Medium 460 220

Big 520 285

DIMENSIONS A B C

Small 800 380 400Medium 800 480 400

Modelo A (regulable)mm

B (ajustable)mm

Cmm

Dmm

TRMTRG

500 a 800600 a 1000

150 a 350200 a 400

625725

450500

01 BRACKETS FOR OUTDOOR UNIT• Ceiling brackets

- Metal sheet 2 mm.- 2 drillings Ø11 ceilingsfixing threaded bar.

- 1 central drillingØ11 to avoid opening.

Code Item €

AS 01 021AS 01 022AS 01 023

• Painted in ivory epoxy-polyester• Supply in single boxesSMALL model «TP»MEDIUM model «TM»BIG model «TG»

25.0026.4027.40

• Window support

- Metal sheet 2 mm.- Telescopic adjustment.- Mobile brace

Code Item €

AS 01 075

• Painted in ivory epoxy-polyester• For appliances of 520 - 750 mm.SOPORT-VENT 36.60

• Anti-rain protector

Code Item €

• Painted in ivory epoxy-polyesterWINDOW

AS 01 077AS 01 078AS 01 079

Anti-rain protector SMALLAnti-rain protector MEDIUMAnti-rain protector BIG

33.3537.0042.20

SPLIT

AS 01 177AS 01 178AS 01 179

Anti-rain protector SMALL 900 x 400Anti-rain protector MEDIUM 1000 x 500Anti-rain protector BIG 1100 x 550

64.8066.8076.20

Please check availability for any other size

TOUCH-UP PAINT FOR BRACKETSCode Item €

AS 01 801 Aerosol 400 ml of nitro-synthetic painting.colour RAL 1015 (light ivory) 15.70



nd


SCSOPORT

DIMENSIONS B F

Small 880 550

Medium 980 650

Big 1,080 750

A

B

WINDOW A BSMALL 500 400MEDIUM 600 500BIG 700 550

SPLIT A BSMALL 900 400MEDIUM 1000 500BIG 1100 550

01 UNIVERSAL ADJUSTABLE FRAMEWORKFOR LIGHT FLAT ROOFS

Code Item €

• Big Foot support surface: 305 mm x 305 mm• Feet total height: 375 mm (optional 575 mm

for graded roofs)• Adjustable height: 245 mm - 350 mm: floor to

framework (optional 245-550 mm for graded roofs)• Maximum charge: 120 Kg per Big Foot

AS 01 101AS 01 102AS 01 103

Framework 1 x 1.3 m (1 to 2 units) 480 KgFramework 2 x 1.3 m (1 to 4 units) 720 KgFramework 3 x 1.3 m (1 to 6 units) 960 Kg

513.00724.00979.00

01 ANTIVIBRATION WORKSURFACEASSEMBLY MACHINES

Code Item Weight kg. Max. loadKg. €

MATERIALS:• Expanded plystyrene core• Reinforced fibre with cement coating• External cement coatingCHARACTERISTICS:• Resistant to external elements• Extreme temperatures• UV rays

ULTRALITE

AS 01 106AS 01 107AS 01 108

Plate 400 x 900 x 51 mmPlate 600 x 600 x 51 mmPlate 600 x 1200 x 76 mm

5510

343270703

38.0038.0045.00



nd


ADJUSTABLE HEIGHTEASY ASSEMBLYDetachable feetThe feet can be removed one by one.If the roof needsto be repaired, the equipment can remain assembled.

BIG FOOTSYSTEMSF O R T O T A L S U P P O R T

Núcleo de poliestireno expandido (EPS)

Fibra reforzadacon revestimientode cemento

Revestimiento externoacabado de cemento

SCSOPORT

2 units 6 units4 units

01 FLOOR SUPPORTS FOR OUTDOOR UNIT

• Floor supports “TerraSoport”Code Item Box content €/unit

SUPPORTS “TerraSoport”

AS 01 790

AS 01 791

AS 01 792AS 01 793

AS 01 794

• Hard PVC colour black or ivory• Allowable load up to 140 Kg per foot• Includes: Set of M10 screws and nutsPRN 350 length 350 BLACK

Box 12 pcsPRN 450 length 450 BLACKBox 12 pcs

PRN 1000 length 1000 BLACKPRB 350 length 350 IVORYBox 12 pcs

PRB 450 length 450 IVORYBox 12 pcs

12

12

212

12

5.404.986.706.20

14.705.404.986.706.20

ACCESSORIES

AS 01 797AS 01 798AS 01 799

Galvanized fixing plate with screwsColoured black end coverColoured ivory end cover

444

3.621.701.70

• Floor supports “EcoSoport”Code Item Box content €/unit

SUPPORTS “EcoSoport”

AS 01 771

AS 01 772

AS 01 773

AS 01 775

• Hard PVC cream coloured• Up to 120 Kg. each support• Including: screw set and M8 nutsPRE length 350 mm

Box 24 pcsPRE length 450 mm

Box 24 pcsPRE length 1000 mm

Box 4pcsSide cover cream coloured

Box 24 pcs

24

24

4

24

3.303.003.903.509.008.550.850.80

• Anti-vibration base "SUMO"for ground

Code Item Load kg. €/unit

AS 01 151AS 01 152AS 01 153AS 01 154

• Profile 160x90 mm• Supplied with grader and boltsLength 250 mmLength 450 mmLength 600 mmLength 1.000 mm

110210310510

14.5020.5529.6547.60

• Set of polyamide plastic supportsCode Item €/unit

AS 01 789• Sets of plastic supportsSet SoportEsc of 4 pcs 6.10

• Floor support with shock absorber and screwCode Item €/unit

AS 01 788 Whole set includes:• Rubber base• Screw and Washer• Rubber shock absorber 2.90



nd


SCSOPORT

105 mm

95 mm

80

95

135

80 mm

80 mm

CA TAILOR-MADE BRACKETS FORAIR-CONDITIONERS

Code Item Supplybag €

MACHINE ASSEMBLY

CA 12 001

COMPOSED CHANNEL RAIL• Sendzimir galvanized• Channel rail 32 x 20 x 2.5PF 30.1 2 m 9.50/m

CA 12 003CA 12 005

GALVANIZED STEEL CONNECTION ANGLEANGP 90 (90o)ANGP 45 (45o)

10 pcs10 pcs

43.10/bag43.10/bag

CA 12 010GALVANIZED STEEL RHOMBUS NUT M10DR 10 10 pcs 5.50/bag

CA 12 015GALVANIZED STEEL TEE BOLT M10 x 16BU 10 10 pcs 6.30/bag

CA 12 016GALVANIZED STEEL HAMMER HEAD BOLTDM 10 10 pcs 25.86/bag

CA 12 091ANTIVIBRATING RUBBER CHANNEL RAILPFG 10 m 60.00/roll

AI 21 108GALVANIZED STEEL NUT M10D 10 100 pcs 10.37/bag

AI 21 035GALVANIZED STEEL PLAIN WASHER M10M10 100 pcs 2.96/bag

DUCT ASSEMBLY

CA 12 051

COMPONIBLE OUTLINE•Made out of zinc • Outline 30 x 15 x 1.5PF 30 8.00/m

CA 12 053CA 12 055

MOUNTING ANGLEANG 90 (90°)ANG 45 (45°)

30.65/bag30.65/bag

CA 12 060SQUARE HAMMER HEAD BOLT M8DR 8 4.78/bag

CA 12 065SCREW AND NUT M8BU 8 2.90/bag

CA 12 066SCREW HAMMER HEAD BOLTDM 8 25.50/bag

CA 12 091ANTIVIBRATING RUBBER CHANNEL RAILPFG 60.00/roll

AI 21 106 ZINC NUT M8 3.41/bag

AI 21 034 ZINC WASHER M8 1.93/bag

WALL CHANNEL ASSEMBLY

CA 12 081

CA 12 082

SUPPORTING SHELF FOR PF AND PF1PA length 80 mmSUPPORTING SHELF FOR PF1PA 30 length 280 mm

1 pc

1 pc

5.12

5.40

CA 12 085CA 12 086

WELDED CHANNEL SHELF• Welded and galvanized • PF1 channel shelfSAT length 350 mmSAT1 length 530 mm

1 pc1 pc

17.1520.10

CA 12 087CA 12 088

BLACK PLASTIC END COVER(PROTEC-HUBCAP)• Black plasticTPF for PF 30 channelTPF1 for PF 30.1 channel

1 pc1 pc

0.400.40

CA 12 096BALL AND SOCKET JOINT SCREWSNO 10 M10 (load 400 Kg) 1 pc 6.45



nd


SCSOPORT

ANGP45°

ANGP90°

PFG

BU

DR 10

DM 10DM 8

SAT

PA 30

PA

TPFSN

PF 30

AI BOLT FOR SPLIT ASSEMBLYCode Item Ø Bit Thread Box cont. €/unit

WALL FIXING

AI 07 341AI 07 346AI 07 342AI 07 347AI 07 343AI 07 344

T 9CT 9CLT 11CT 11CLT 14CT 16C

9911111416

M6 x 45M6 x 60M8 x 60M8 x 80M10 x 70M12 x 80

20020010010010050

0.260.290.400.490.600.97

AI 07 338AI 07 339

Blister BT10C 4 pcs. M8 x 60 (bit Ø10 mm)Blister BT10CL 4 pcs. M8 x 80 (bit Ø10 mm)

3.363.74

Threaded brass plug

AI 07 351AI 07 353AI 07 354AI 07 355

M4M6M8M10

581012

M4M6M8M10

25010010050

0.110.200.410.70

NYLON PLUGS LP4

4 directions expansive plugs to fix on solid or emptymaterials.With two side wings to avoid spining duringmounting and ensure a correct installation on emptymaterials. Working temperature -40 / +80°C

AI 07 271AI 07 272AI 07 273

Plug 6 x 30 ( 100 pcs. box)Plug 8 x 40 ( 100 pcs. box)Plug 10 x 50 ( 50 pcs. box)

3.826.265.90

GALVANIZED FIXING THREADED RODS

AI 21 310

AI 21 311

AI 21 312

AI 21 316

Thread M4 x 1000 mmThread M4 (bale 250 m)Thread M6 x 1000 mmThread M6 (bale 100 m)Thread M8 x 1000 mmThread M8 (bale 50 m)Thread M10 x 1000 mm

250

100

50

25

0.860.80/pc

0.970.87/pc

1.611.44/ud

1.80WRENCH FOR ASSEMB. THREADED BARS

AI 21 321

• Allows to mount without any damage all typesof threaded bars M6, M8, M10, M12

Type CBF 36.10GALVANIZED STEEL HEXAGON NUT

AI 21 107AI 21 105AI 21 106AI 21 108AI 21 111

M 4M 6M 8M 10M 12

100100100100100

1.40/bag1.70/bag3.41/bag

10.37/bag12.00/bag

STAINLESS STEEL NUT

AI 21 038 Stainless steel M 8 100 12.04/bagCHANNEL SLIDENUT

CA 12 060CA 12 010

Rectangular nut M8Rectangular nut M10

1010

4.78/bag5.50/bag

GALVANIZED STEEL WASHER

AI 21 031AI 21 033AI 21 034AI 21 035AI 21 036

M 4M 6M 8M 10M 12

100100100100100

0.46/bag0.89/bag1.93/bag2.96/bag2.18/bag

STAINLESS STEEL WASHER

AI 21 037 Stainless Steel M 8 3.83/bagGALVANIZED NOTCHED WASHER

AV 01 057AV 01 058

M 8 notchedM 10 notched

0.050.09

GALVANIZED BOLTS

AS 02 991 Galvanized bolts M8 x 30 mm 0.16HEXAGONAL HEAD BOLTS

AS 02 235 Galvanized bolts 8 x 70 0.18



nd


1 metre

AI BICOMPONENT CHEMICAL ANCORAGEPOLYESTER RESIN BASED

Code Item €

Application by proffesional 380 ml gun. Its greatmechanical resistance and its adherence makes it idealfor screwed rods ancorage in walls and empty walls,with nylon sieves.

AI 07 251AI 07 252AI 07 253AI 07 254AI 07 255AI 07 256

Polyester resin cartridge 380 ml + 1 mixerProfessional gun 380 mlResin MixerNylon sieve diam. 12 x 50 mm (10 pcs. box)Nylon sieve diam. 15 x 85 mm (10 pcs. box)Nylon sieve diam. 20 x 85 mm (10 pcs. box)

22.2141.060.98

4.20/box4.70/box6.10/box

BEAM CLAM CASTEDCode Item Thread Max. load

KgMax. thickness

channel rail €

VERTICAL SUSPENSION

AS 02 301AS 02 302AS 02 303AS 02 304

MOR 8MOR 10MOR 12MOR 16

M8M10M10M12

120250350550

18212626

2.002.503.405.00

STEEL OSCILLATING CLAMP

AS 02 305 MOR 2 M10 See picture 24 37.30

ENLARGER / SPREADABLE HOSECode Item Box cont. €

CYLINDRICAL SPREADABLE HOSE

• To enlarge rods or mount rods with male joint.

AI 21 112AI 21 113AI 21 114

M4 x 20M6 x 20M8 x 25

100200200

0.120.220.21

ROD ENLARGER HOSE

AI 21 323AI 21 324

PV M6PV M8

1.991.51

01 ADJUSTABLE EQUIPMENT FOR INSTALLATION OF UNITS

Code Item €

AS 01 099

It allows a rapid fixing of the units, due to anadjustment lengthwise and breadthwise of the fourfixing points, without the help of the machineDIMA model 70.00



nd


MOR 10MOR 12

Type A C D F G Weight LoadMOR8 21 35 Ø9 M8 21 81 120MOR10 23 42 Ø11 M10 23 143 250MOR12 35 54 Ø11 M10 29,5 216 350MOR16 30 58 Ø13 M12 29,5 318 550

MOR 2

MOR 2 APPLICATIONS

02 FIXING SYSTEMS ABOVE METAL BEAMCode Item Kg Thickness

beam (mm)Supply

bag €/unit

SUPPORT FORHANGING WITH NUTS AND SCREWS

CA 12 111CA 12 112CA 12 114CA 12 115

100-210 Thread M6100-211 Thread M8101-210 Thread M6101-211 Thread M8

70707070

1.5-41.5-44-104-10

100100100100

0.880.881.091.09

QUICK FIXING SYSTEMSABOVE CONCRETE BEAMS

• For hanging with nuts and screws

Code Ref. M Kg Pieces/box €/unit

CA 12 153CA 12 154

500-211/125500-211/140

M8M8

7070

5050

6.646.64

Mounting example:

FIXING SYSTEMS ABOVE HOLLOW WALLCode Item ØDrill Wall thickness pcs/box €

WITH SCREW

AI 07 361AI 07 363AI 07 365

M5 x 45M6 x 45M8 x 61

111313

6 - 136 - 133 - 16

100100100

0.610.671.03

WITHOUT SCREW

• Ideal for ducted assembly to vaultsby means of screws

AI 07 374AI 07 376AI 07 378AI 07 381AI 07 383

M5 x 45M6 x 45M6 x 71M8 x 61M8 x 73

1113131313

6 - 136 - 1316 - 323 - 1616 - 32

100100100100100

0.610.590.700.780.94

AI 07 391 Mod. 360000 to be used with nuts M4, M5, M6 and M8 47.88



nd


Min. 92 mm

Min

.27

mm

Min

.27

mm

500/125 500/140

Min. 120 mmMáx. 125 mm

Máx

.35

mm

Máx

.40

mm

Máx. 140 mm

Type of beams

Ref. A (mm) B (mm) M (mm)

100-210 1.5-4 18 6

100-211 1.5-4 18 8

101-210 4-10 25 6

101-211 4-10 25 8

AF «GRIPPLE» HANGER UNITSCode Description Min-Max

Load (Kg) Reference Pac-king €

GRIPPLE FIXING HF LOOP (FR)

AF 12 001AF 12 003

Nº1 1 meterNº1 3 meters

0-100-10

HF11FRHF13FR

1010

4.786.08

AF 12 011AF 12 013


10-4510-45

HF21FRHF23FR

1010

5.837.34

GRIPPLE FIXING STAINLESS STEEL LOOP 316L (FR)

AF 12 201AF 12 203


10-4510-45

INOX21FRINOX23FR

1010

11.7114.52

GRIPPLE FIXING HF THREADED 6 mm (EF6)

AF 12 061AF 12 063


0-100-10

HF11EF6HF13EF6

1010

4.786.08

AF 12 071AF 12 073


10-4510-45

HF21EF6HF23EF6

1010

5.837.34

GRIPPLE FIXING HF THREADED 8 mm (EF8)

AF 12 091AF 12 093


10-4510-45

HF21EF8HF23EF8

1010

5.837.34

GRIPPLE FIXING STAINLESS STEEL THREADED 304L

AF 12 221AF 12 223

• 6 mm (EF6)Nº2 1 meterNº2 3 meters

10-4510-45

INOX21EF6INOX23EF6

1010

14.3717.84

AF 12 241AF 12 243

• 8 mm (EF8)Nº2 1 meterNº2 3 meters

10-4510-45

INOX21EF8INOX23EF8

1010

14.3717.84

GRIPPLE FIXING HF SNAP HOOK (EC)

AF 12 111AF 12 113


0-100-10

HF11ECHF13EC

1010

4.786.08

AF 12 121AF 12 123


10-4510-45

HF21ECHF23EC

1010

5.837.34

GRIPPLE FIXING HF 90° EYELET (EO90)

AF 12 141AF 12 143


0-100-10

HF11EO90HF13EO90

1010

4.786.08

AF 12 151AF 12 153


10-4510-45

HF21EO90HF23EO90

1010

5.837.34

GRIPPLE FIXING HF TOGGLE(SP)

AF 12 031AF 12 033


0-100-10

HF11SPHF13SP

1010

4.786.08

AF 12 041AF 12 043


10-4510-45

HF21SPHF23SP

1010

5.837.34

GRIPPLE ACCESSORIES

AF 12 301 Adaptor M6 GRIPADAP6 10 0.47AF 12 302 Adaptor M8 GRIPADAP8 10 0.89AF 12 303 100 ut. bag wire anchor SWL GRIHK100 1 41.06AF 12 304 100 ut. bag wire anchor SWL with hook GRIHK100P 1

47.90AF 12 305 Karabiner 6 for loop GRIPKARA6 10 0.99AF 12 306 Karabiner 6 SS for loop GRIPKARA6I 10 2.15AF 12 312 Flagkey gripple nr. 1, 2 and 3 GRIPCLE1 1 3.22AF 12 313 Wire rope cutters (galvanised or SS) nr. 1, 2 and 3 GRIPPINC 1 58.11AF 12 315 Workbelt GRIPBELT 1 39.68



nd


90° Eyelet

Threaded

SS loop

Adaptor

Karabiner

Cutters

Flagkey

Trapeze

Wireanchor

Toggle

Snap hook

FULLBOX

Assembly options

02 SPLITS ASSEMBLY BAGSCode Item €

BASIC FIXING BAG

AS 02 201 Type B1 contains:6 electrogalvanized metal plug T11C4 galvanized screws M8 x 304 galvanized nuts M84 galvanized washers M84 notched washers M8 3.25

ECONOMIC FIXING BAG

AS 02 202 Type B2 contains: 6 plugs Ø10 x 606 hexagonal head screws Ø8x706 washers Ø8x17

Box 100 bags2.422.00

SIMPLE FIXING BAG

AS 02 203 Type B0 contains: 6 plugs Ø10 x 506 hexagonal head screws Ø8x50

Box 100 bags1.801.56

BASIC SHOCK-ABSORPTION BAG

AS 02 211 Type B3 contains: 4 antivibrators A-35b (8 to 30 Kg)8 galvanized nuts M88 galvanized washers M8

Box 100 bags3.253.10

AS 02 212

AS 02 112

Type B4 contains: The same as B-3 but also withantivibrators A-35 (12 to 50 Kg) blackType B4/N (neutral bag)Box 100 bagsBox 250 bagsBox 500 bags

2.302.302.001.821.60

AS 02 213

AS 02 113

Type B5 contains: The same as B-3 but also withantivibrators A-45 (12 - 85 Kg)Type B5/N (neutral bag)Box 100 bagsBox 250 bagsBox 500 bags

4.604.603.503.102.70

AS 02 111 Type B6 contains: 4 antivib. A-27 (8 to 25 Kg) black8 galvanized nuts M88 galvanised washers M8

Box 100 bagsBox 250 bags

2.051.601.35

COMPLETE BAGS SHOCK-ABSORPTION AND FIXING

AS 02 221 Type B7 contains:6 electrogalvanized metal plugs T11C4 antivibrators A-35b (8 - 30 Kg)8 galvanized nuts M88 galvanized washers M8 5.90

AS 02 222 Type B8 contains: The same as B-7 but also withantivibrators A-35 (12 - 50 Kg) 5.35

AS 02 223 Type B9 contains: The same as B-7 but also withantivibrators A-45 (12 - 85 Kg) 10.20

BAG FOR GROUND ACCESSORIES

AS 02 225

AS 02 125

Type B10 contains: 4 complete shock-absorbers S40with nuts and washersType B10 (neutral bag)Box 100 bagsBox 250 bagsBox 500 bags

3.603.602.802.402.10

AS 02 226

AS 02 126

Type B12 contains: 4 complete shock-absorbers S60with nuts and washersType B12 (neutral bag)Box 50 bagsBox 100 bagsBox 250 bags

5.525.524.554.003.32

BAG FOR GROUND WITH SEPARATION

AS 02 288 Type B15 contains: 4 shock-absorbers ST03 of 75 mmwith nuts. and washers 8.00

AS 02 289 Type B16 contains: 4 shock-absorbers ST04 of 100 mmwith nuts and washers 9.65

* Neutral bags only for WAREHOUSES



nd


8 8

SHOCK-ABSORTION BAG

4

COMPLET BAG

44 4

BASIC FIXING BAG

6 4

8

BAG FOR GROUND

48

ECONOMIC FIXING BAG

66 6

SIMPLE BAG

6 6

SEPARATION BAG

4

SCSOPORT

03 COVERING DUCTS FORAIR-CONDITIONER PIPES

Code Item Box content €

WHITE DUCT

AS 03 251AS 03 252AS 03 241AS 03 255AS 03 253AS 03 254

Duct CB 60 x 40Duct CB 80 x 40Duct CB 100 x 40Duct CB 60 x 60Duct CB 80 x 60Duct CB 100 x 60

40/m32/m24/m32/m24/m18/m

5.17/m7.77/m9.62/m7.13/m7.98/m9.88/m

FLAT CORNER 90°

AS 03 256AS 03 257AS 03 242AS 03 260AS 03 258AS 03 259

Corner AP 60 x 40Corner AP 80 x 40Corner AP 100 x 40Corner AP 60 x 60Corner AP 80 x 60Corner AP 100 x 60

101010101010

3.193.584.093.653.924.41

IN-CORNER 90°

AS 03 261AS 03 262AS 03 243AS 03 265AS 03 263AS 03 264

Corner AI 60 x 40Corner AI 80 x 40Corner AI 100 x 40Corner AI 60 x 60Corner AI 80 x 60Corner AI 100 x 60

101010101010

3.193.373.763.513.723.85

OUT-CORNER 90°

AS 03 266AS 03 267AS 03 244AS 03 270AS 03 268AS 03 269

Corner AE 60 x 40Corner AE 80 x 40Corner AE 100 x 40Corner AE 60 x 60Corner AE 80 x 60Corner AE 100 x 60

1010810108

3.193.373.763.513.723.85

END COVER

AS 03 271AS 03 272AS 03 245AS 03 275AS 03 273AS 03 274

Cover TF 60 x 40Cover TF 80 x 40Cover TF 100 x 40Cover TF 60 x 60Cover TF 80 x 60Cover TF 100 x 60

202020202020

1.872.152.562.272.482.79

COVER JOINT

AS 03 276AS 03 277AS 03 278

Cover joint EJ 60Cover joint EJ 80Cover joint EJ 100

202020

0.891.001.07

DUCTS WITH COVERCode Item Box content €/mt

WHITE DUCT

AS 03 201AS 03 202AS 03 203AS 03 205AS 03 206AS 03 207

Duct 40-60 BDuct 60-60 BDuct 60-80 BDuct 60-100 BDuct 60-120 BDuct 80-120 B

48 mt32 mt32 mt24 mt16 mt12 mt

6.697.939.80

13.2214.7216.58

AS 03 501AS 03 811AS 03 511

Duct 25-25Duct 30-25 BDuct 35-30

64 mt.80 mt.64 mt.

2.504.293.95




nd

Cover joint

In-corner 90°

Flat corner 90°

Tube forcondensate fluids

End cover

Out-corner 90°


• LARGE CAPACITY• Colour RAL 9010

Code Item Box €

120x60 DUCT

AS 03 001AS 03 002AS 03 003AS 03 004AS 03 005

Duct TA-EN 120x60Out-cornerIn-cornerFlat cornerEnd cover

161010105

13.00/m6.506.50

12.202.90

150x60 DUCT

AS 03 011AS 03 012AS 03 013AS 03 014AS 03 015


125545

23.08/m9.209.20

26.803.00

150x80 DUCT

AS 03 021AS 03 022AS 03 023AS 03 024AS 03 025


125545

28.66/m16.2016.2028.704.10

200x80 DUCT

AS 03 031AS 03 032AS 03 033AS 03 034AS 03 035


84445

40.45/m18.5018.5038.505.20

COVERING DUCTS• ECONOMIC Series

Code Item Box cont. €

• Plastic PVC M1• White colour RAL 9001

DUCT

AS 03 761AS 03 762AS 03 763

Duct 60 x 40Duct 80 x 60Duct 100 x 60

301616

3.685.256.83




nd

White duct

Flat corner 90°

Out-corner 90°

End cover

In-corner 90°

FULLBOXESONLY


• Round corners• Colour RAL 9001• Working temp. range: from -20°C to +60°C

Code Item Box content €

DUCT

AS 03 601AS 03 602AS 03 603AS 03 604AS 03 605

BC 60 x 45BC 70 x 55BC 80 x 60BC 90 x 65BC 110 x 75

24/m.24/m.16/m.16/m.8/m.

3.30/m4.10/m4.95/m5.80/m7.10/m

ECONOMICAL DUCT “MIDI”

AS 03 608AS 03 609

MD 60 x 45MD 80 x 60

24/m.16/m.

2.65/m3.95/m

DUCT WITH TRANSPARENTPROTECTING FILM

AS 03 616AS 03 617AS 03 618AS 03 619AS 03 620

BCF 60 x 45BCF 70 x 55BCF 80 x 60BCF 90 x 65BCF 110 x 75

24/m.24/m.16/m.16/m.8/m.

3.50/m4.50/m5.25/m6.10/m7.50/m

ADJUSTABLE BRACKETS TO FIX PIPES

AS 03 611AS 03 612AS 03 613AS 03 614AS 03 615

ST 60ST 70ST 80ST 90ST 110

3030303020

0.270.300.300.340.36

COVER-JOINT DUCT UNION

AS 03 621AS 03 622AS 03 623AS 03 624AS 03 625

GC 60GC 70GC 80GC 90GC 110

3030303020

1.201.341.651.701.80

IN-CORNER

AS 03 631AS 03 632AS 03 633AS 03 634AS 03 635

AI 60 x 45AI 70 x 55AI 80 x 60AI 90 x 65AI 110 x 75

88664

2.332.492.662.843.36

OUT-CORNER

AS 03 641AS 03 642AS 03 643AS 03 644AS 03 645

AE 60 x 45AE 70 x 55AE 80 x 60AE 90 x 65AE 110 x 75

1212996

2.332.502.662.843.36

PLANE CURVE

AS 03 651AS 03 652AS 03 653AS 03 654AS 03 655

CP 60 x 45CP 70 x 55CP 80 x 60CP 90 x 65CP 110 x 75

1010886

2.662.903.703.944.82

ADJUSTABLE IN-CORNER 80° TO 105°

AS 03 715AS 03 716

IR 60 x 45IR 80 x 60

6/pc.4/pc.

2.703.10

ADJUSTABLE OUT-CORNER 70° TO 120°

AS 03 720AS 03 721

ER 60 x 45ER 80 x 60

8/pc.6/pc.

2.703.10

ADJUSTABLE PLANE-CORNER 65° TO 130°

AS 03 724AS 03 725

PR 60 x 45PR 80 x 60

8/pc.6/pc.

3.104.26




nd

GC

AE

CP

AI

IR

ER

PR

BC

ST

MD

FULLBOXESONLY


• Round cornersCode Item Box

content €

END CAP

AS 03 661AS 03 662AS 03 663AS 03 664

TT 60 x 45TT 70 x 55TT 80 x 60TT 90 x 65

121299

2.222.332.602.66

CORNER WALL ELBOW

AS 03 671AS 03 672AS 03 673AS 03 674AS 03 675

CM 60 x 45CM 70 x 55CM 80 x 60CM 90 x 65CM 110 x 75

99664

3.253.634.224.455.19

WALL PASSAGE

AS 03 681AS 03 682AS 03 683AS 03 684AS 03 685

PM 60 x 45PM 70 x 55PM 80 x 60PM 90 x 65PM 110 x 75

1010888

2.522.663.233.424.31

“T” SHUNT

AS 03 691AS 03 692AS 03 695

DT 80 x 60DT 90 x 65DT 110 x 75

442

6.376.907.95

REDUCTION

AS 03 701AS 03 702AS 03 703AS 03 704AS 03 705AS 03 706

RI 80-60RI 80-70RI 90-60RI 90-70RI 110-80RI 110-90

1212121288

1.801.801.941.962.062.60

FLEXIBLE DUCT

AS 03 711AS 03 713

• Length 590 mmGF 60 x 45GF 80 x 60

64

4.745.44

FIXING SYSTEMS FOR DRAINAGE CHANNELSCode Item €

ADHESIVE PUTTY

AS 03 800AS 03 801AS 03 802

• It allows to fix the channel to wall without stoppers• Suitable for PVC and plastic• Water and temperat. from -20°C to110°C resistant• Quick drying• Permanent elasticityMONTA-KIT 125 gr tubeMONTA-KIT 310 ml cartridgeMONTA-KIT direct & quick glue 310 ml cartridge

6.4010.6511.70

SPRAY GUN

AI 19 011• To apply the cartridges of adhesive puttySpray gun H175 zipper application 4.10

BOX OF PLASTER FOR COVERING CRACKS

AS 03 821 Box 1.5 Kg. plaster 2.50NAIL WALL PLUG

AS 03 814AS 03 813AS 03 815

• Nylon wall plug (polyamide)• Bichromatic steel screwWall plug 5x25 mm 100 units boxesWall plug 6x35 mm 100 units boxesWall plug 6x45 mm 100 units boxes

10.92/box13.50/box14.50/box

AS 03 816AS 03 817

Quick fixing 6x35 mm thread M6 100 units boxesQuick fixing 8x60 mm thread M8 50 units boxes

20.10/box25.00/box




nd

RI

PM

Ø6

GF

TT

adhesive putty

APPLICATION BY GUN

CM

DT

03 ROUND CORNERS DUCTS " "

Code Item UnitPacking €

• WITH ROUNDED CORNERSDUCTS

AS 03 301AS 03 302AS 03 104AS 03 303

FECR 32-35FECR 40-70FEC 60-70FECR 60-100

48/m.40/m.32/m.32/m.

3.88/m5.45/m6.70/m8.20/m

BASE FOR DUCTS FBC

AS 03 113AS 03 111AS 03 114AS 03 112

FBC 32-35FBC 40-70FBC 60-70FBC 60-100

48/m.40/m.32/m.32/m.

2.39/m3.94/m5.52/m6.70/m

PIPE CLAMP

AS 03 115AS 03 116AS 03 117

• Includes plugs and screwsFAC (Composed) from Ø 15 to 45FAS (Sanitary) from Ø 10 to 22FAS 26-2 (Sanitary) from Ø 12 to 18

505050

1.291.181.01

JOINTS

AS 03 321AS 03 322AS 03 124AS 03 323

FUR / 33FUR / 47FU / 67FUR / 610

1212/10*

1212/5*

1.521.791.882.07

IN-CORNER

AS 03 325AS 03 326AS 03 128AS 03 327

FAIR / 33FAIR / 47FAI / 67FAIR / 610

108/10*

88/5*

2.893.624.714.86

OUT-CORNER

AS 03 331AS 03 332AS 03 134AS 03 333

FAER / 33FAER / 47FAE / 67FAER / 610

108/10*

88/5*

2.893.624.714.86

FLAT CORNER

AS 03 335AS 03 336AS 03 138AS 03 337

FAPR / 33FAPR / 47FAP / 67FAPR / 610

108/10*

88/5*

3.014.204.725.66

T-SHAPE JOINT

AS 03 341AS 03 342AS 03 139AS 03 340

FDTR / 33FDTR / 47FDT / 67FDTR / 610

108/5*

610/2*

2.933.674.014.11

REDUCER JOINT

AS 03 343AS 03 344

FBRR / 47 / 33 (with reduction FDT / 47 - 33)FBRR / 610 / 47 (with reduction of 610 / 47)

85/2*

3.003.53

END CAP

AS 03 345AS 03 346AS 03 148AS 03 347

FTFR / 33FTFR / 47FTF / 67FTFR / 610

101010

10/5*

2.873.323.473.71

SANITARY COVER JOINT

AS 03 351AS 03 352AS 03 353

FBMR / 33 singleFBSR / 47 doubleFBBR / 47 bathroom

10106

3.654.696.22

ELBOWED HOSE WITH SUPPORT

AS 03 161 FR - 741/15 (1/2" x Ø 15) brass 20 2.72

* New contents 2012 (bold letters)




nd

With the FBC base youcan work without clamps.like in a classic duct

FAS 26-2

FAC

FAS

FAER

FAIR

FAPR

FBBR

FDTR

FAS FAC

FBRR

FUR

FR

FTFR

03 COVERING DUCTS " "Code Item Packing units €

PLAIN BASE

• Includes a set square every 50 cm• Nylon clamp installation available

AS 03 362AS 03 363

FBP-47 for FBP40-70 and 60-70FBP-610 for FBP60-100

40/m32/m

4.01/m5.90/m

STRAIGHT WALL END

AS 03 366AS 03 367

FPMR-47FPMR-610

88

3.434.10

BENDED WALL END

AS 03 372AS 03 373

FPMA-47FPMA-610

88

4.466.61

* Installing an FAC or an FAS is not compulsory.

AESTHETIC FRONT DUCT

Code Item €

• Plastic PVC M1• White colour• Temperature working range: From -40°C to 60°C

FRAMESAF 15 351AF 15 352

Frame 176 x 74 length 2 m.Frame 218 x 109 length 2 m.

29.66/m35.20/m

FRAMES SUPPORTSAF 15 353AF 15 354

Wall mounted support 176 x 74Wall mounted support 218 x 109

6.867.31

OUT-CORNERAF 15 355AF 15 356

Out-corner 176 x 74Out-corner 218 x 109

44.5359.47

IN-CORNERAF 15 357 In-corner 176 x 74 44.98

GUTTERCode Item Packing units €

• Round edgesGUTTER

AS 03 451AS 03 452AS 03 453

Esconduct-clip 40 x 70Esconduct-clip 60 x 70Esconduct-clip 60 x 100

483224

5.24/m6.44/m7.88/m

MOUNTING CLAMP

AS 03 455AS 03 456AS 03 457

Mounting clamp 40 x 70Mounting clamp 60 x 70Mounting clamp 60 x 100

505050

1.101.181.50

BASE

AS 03 461 Profile base clipping 24 3.25/m




nd

Frame

B 176 214,3C 2000 2000

Frame support

A 60 60B 165,5 206,6C 75,5 100,5

STRAIGHTwall end

BENDEDwall end

“Keeps the pipehorizontal”

Flat horizontal base with "set square"

03 DRAIN HOSE DUCTCode Item Box cont. €

DUCTS

AS 03 501AS 03 511

Duct 25 x 25Duct 35 x 30

64/m64/m

2.50/m3.95/m

JOINT COVER

AS 03 502AS 03 512

Plate GCPlate GC 35 x 30

2020

1.251.80

IN-CORNER

AS 03 503AS 03 513

Corner AICorner AI 35 x 30

2020

1.251.80

OUT-CORNER

AS 03 504AS 03 514

Corner AECorner AE 35 x 30

2020

1.251.80

FLAT CORNER

AS 03 505AS 03 515

Corner CPCorner CP 35 x 30

2020

1.251.80

TERMINAL

AS 03 506AS 03 516

Terminal TTTerminal TT 35 x 30

2020

1.251.80

JUNCTION

AS 03 507AS 03 517

Junction RCJunction RC 35 x 30

2020

1.251.80

• WALL THROUGH PROTECTION

Code Item €

AS 03 750 • Wall through for air conditioning installation• Inner diameter Ø64mm• Length 350 mm, can be cut depending on wall dim.• Frame diameter Ø100 mm with 3 fixing points 5.35

INLET FOR FLAT ROOFSCode Item €

ROOF INLET

• Pipe and cable inlet for installationswith an outside unit on a flat roof

AS 03 751 Mod. Roof inlet 125Size: 125 x 125 mm 105.00

AS 03 752 Mod. Roof inlet 250Size: 250 x 125 mm 112.00

ANGULAR MITER CUTTER FOR DUCTCode Item €

DUCT 100 mm

MA 01 307

MA 01 308

Angular miter cutter of 550 mm• Coulter dimension: 550 mm• Base length: 400 mm• Base width: 45 mm• Cutting max. height: 120 mm• 90° cutting width: 110 mm• 45° cutting width: 90 mmCoulter of 550 mm

48.5015.90




nd

Joint cover GC

In-corner AI

Plain curve CP

Out corner AE

End capTT Junction RC

Duct

03 EMBEDDED PRE-INSTALLATION BOXCode Item €/pc.

«PRE-AIR» BOX

AS 03 901 • Box for build in ABS with white cover• Dimensions: 350 x 120 x 50 mmOrders 25-49 pcs.Orders 50-99 pcs.Orders 100+ pcs.

5.505.104.704.30

«PRE-AIR» BOX WITH DRAIN OUTLET

• Box for build in ABS with white cover• Collecting tray• Includes elbow 90° and insulating tape

AS 03 905 Mod. NORMAL WITH DRAIN OUTLET• Dimensions: 392 x 134 x 55 mmOrders 25-49 pcs.Orders 50-99 pcs.Orders 100+ pcs.

6.255.755.254.75

AS 03 930 Mod. PRO WITH DRAIN OUTLET• Dimensions: 396 x 112 x 55 mm• Dimensions: 396 x 112 x 55 mm with drain outletOrders 25-49 pcs.Orders 50-99 pcs.Orders 100+ pcs.

7.507.006.506.00

SPARE COVERS

AS 03 941AS 03 942

PRE-AIR cover 350x120 (AS 03 901)PRE-AIR cover 392x134 (AS 03 905)

2.642.70

EMBEDDED PRE-INSTALLATION BOXCode Item €/pc.

STANDARD BOX (WITHOUT COLLECTING TRAY)MINI BOX

AS 03 918AS 03 919

• Box to build in ABS with spare white cover by screws• Dimensions: 300 x 100 x 60 mmBoxCover

2.502.60

«PARTITION WALL» BOX 50 mm

AS 03 903 • Box to build in ABS with white cover• Dimensions: 430 x 110 x 50 mmOrders 25-49 ut.Orders 50-99 ut.Orders 100+ ut.

5.204.504.003.50

«WALL» BOX 65 mm

AS 03 902 • Box to build in ABS with white cover• Dimensions: 430 x 110 x 65 mmOrders 25-49 ut.Orders 50-99 ut.Orders 100+ ut.

5.805.004.403.80

BOX WITH COLLECTING TRAY«PARTITION WALL» BOX "Only 45 mm”

AS 03 910 • Box to build in ABS with white cover• Includes collecting tray• Dimensions: 392 x 112 x 45 mmOrders 25-49 ut.Orders 50-99 ut.Orders 100+ ut.

5.004.604.203.85

«WALL» BOX 65 mm

AS 03 921AS 03 922

Vertical outletHorizontal outlet• Dimensions: 420 x 95 x 65 mm• Drain outlets Ø 16/20 mmOrders 50-99 ut.Orders 100+ ut.

6.505.004.20

LONG BOX

AS 03 911 • Box for build in ABS with white cover• Dimensions: 470 x 130 x 67 mm• 2 outlet tray with O ringsOrders 50-99 ut.Orders 100+ ut.

12.0010.609.60

SPARE COVERS

AS 03 943AS 03 944AS 03 946

PRE-INST cover 430x110 (AS 03 902/903)PRE-INST cover 470x130 (AS 03 911)ESCOPRE-INST cover 420x95 (AS 03 921/922)

2.202.302.60




nd

SCOPRE•INST

VERTICAL

HORIZONTAL

NO

SCREWS

WALLwith draining

LONGwith draining

PARTITION WALLwith draining

PRE-AIR PRO

PRE-AIR

PRE-AIRwith drain

outlet

NORMALwithout draining

03 EMBEDDED PRE-INSTALLATION BOXCode Item €/pc.

«SUPER» BOX

AS 03 904AS 03 906

• ABS box to build in with white cover• Dimensions: 530 x 90 x 65 mm• Dimensions with tray and cover: 550 x 140 x 65 mm• Tray with connection Ø16. Ø18 and Ø20 mm drain pipeHorizontal outletVertical outletOrders 25-49 ut.Orders 50-99 ut.Orders 100+ut.

7.607.607.206.806.30

BOX WITH WATER TRAP

AS 03 932AS 03 931

• Box for build in ABS with white cover• Includes water trap with plugs• Orientable trapDimensions: 480 x 130 x 60 mmDimensions: 300 x 100 x 60 mm

15.7612.55

CONDENSATE SIPHONSCode Item €

ORIENTABLE SIPHON

AS 03 933 • With air purge and plug• Orientable with joint• Ideal for electric boxes 6.22

HORIZONTAL/VERTICAL SIPHON

AS 03 934 • Inlet Ø20 mm (A and C)• Reduced inlet Ø20-18-16 (B)• Ideal corrugated tubes 8.60

IN-LINE SIPHON

AS 03 939 In-line siphon for condensate pipes.Vertical assembly 2.50

HIGH CAPACITY TUBES 3/4"

AS 03 938 Mod. EZT-113B, includes:• Coupling to tray• Transparent elbow 180°• Cross connector wiith plugs• Flexible cleaning brush• T with plug 25.65

SIPHON WITH BOX TO BUILD IN

AS 03 950 • Box with dimensions 175 x 260 x 82 mm with siphonbox for condensates• Includes O rings, outlets Ø 20. 26

32 mm and cover 18.00

SIPHON WITH BOX TO BUILD INAND SHUT-OFF VALVE

AS 03 951 • Transparent siphon box with shut-off valve• Includes surface cover, O rings and reductions ofØ20M to Ø24H, Ø20M to Ø25H and Ø20M to 32H 21.80




nd

SCOPRE•INST

STANDARDwithout draining

SUPERwith draining

Horizontal/verticalsiphon

In-linesiphon

Siphon withbox to build in

High capacity tubes 3/4"

Orientablesiphon

04 CONDENSATION COLLECTING• Condensation collecting tray

Code Item €/pc

AS 04 001AS 04 002AS 04 003

• Painted in ivory epoxy• Outlet coupling Ø 14• Cardboard box of 2 unitsSmall model (380 x 875)Big model (450 x 925)Super model (475 x 1100)

28.6031.0033.00

AS 04 021AS 04 022AS 04 023

Small model (380 x 875)Big model (450 x 925)Super model (475 x 1100)

28.6031.0033.00

STAINLESS

AS 04 005AS 04 006AS 04 007

• Stainless AISI-304Stainless Small model (380 x 875)Stainless Big model (450 x 925)Stainless Super model (475 x 1100)

78.5082.60

101.50TRAY SUPPORT

AS 04 011AS 04 012AS 04 013

Set of tray supports SmallSet of tray supports BigSet of tray supports Super

16.4017.3018.50

• Plastic condensation tray

Code Item €

AS 04 016AS 04 017

• Ivory colour plastic tray with 16. 18 and 20 mm Øvertical tube outlet

• Includes plastic support setSmall mod. 790P (790 x 390)Big mod. 940P (940 x 420)

22.5524.85

• Treatment for trays

Code Item €

HF 18 411

• Helps to eliminate odours• Prevents overflow and damages caused by water• It is not corrosive• Cleans fur and mud• It is not toxic• Use 2 to 4 tablets per month per 3 500W for airconditioning and coolingPREMIUM 200 18.50




nd

BELOW

LATERAL

Lower exitdetail

Check our website forof:

• Copper• Refrigerant gases• Welding rods• Electric cables

UPDATED PRICED

www.salvadorescoda.com

04 CANS FOR CONDENSED FLUIDSCode Item €

PLASTIC CAN

AS 04 401AS 04 402

• Condensed fluids to be unloadedwhere no close drain exists

• Blind cap and handle for transportCan 5 litres 190 x 135 x 285 mmCan 10 litres 245 x 165 x 370 mm

2.404.40

WALL SUPPORT

AS 04 411AS 04 412

• Allows wall fixing. Includes anti-upset bar.Painted in ivory epoxy-polyester

Wall support for cans 5 ltsWall support for cans 10 lts

15.0016.60

ACOUSTIC CONTROLLER FORCONDENSATE LEVEL

Code Item €

STOP WATER

AS 04 421

• Electronic unit with liquid-level controllerand acoustic and bright alarm

• Easy to install• Working with battery of 9 V

STOP WATER standard 45.00

AS 04 422

• It is identical to the former one but with awire of 2.5 m with a connector which allowsa liquid-level control of the outdoor cans

STOP WATER with a remote distance probe 60.00

DRAIN HOSE ELBOWCode Item €

AS 04 051

• It can be applied to the main condensersof the market, by means of pressure elasticclosing with a joint and 2 stoppers

Ø19 Drain hose elbow 2.95

AS 04 053AS 04 052AS 04 054

• It allows to plug all the unusable holes ofthe condensers

Ø19 Drain hose elbow with jointAdditional stopper for the drain pipe elbow Ø19Ø19 Joint

2.300.900.86

AS 04 055• Provided with 2 stoppers for drill Ø32 mmØ32 mm Drain hose elbow 3.65




nd

STOP WATER

Remote STOP WATER

Ø19

Ø32

04 DRAIN HOSECode Item €

TRANSPARENT DRAIN HOSE

AS 04 100AS 04 101AS 04 102AS 04 103AS 04 105AS 04 104

• Great resistance to the atmospheric agents• It stands temperatures from -10 to 60°C• Rolls 25 mRolls of ultravinyl pipe Ø 4/6 (condensate pump to outlet)Rolls of ultravinyl pipe Ø 6/9 (condensate pump to outlet)Rolls of ultravinyl pipe Ø 10/14 ( condensate pump to outlet)Rolls of ultravinyl pipe Ø 15/20 (from machine to outlet)Rolls of ultravinyl pipe Ø 20/25 (from machine to outlet)Rolls of ultravinyl pipe Ø 25/31(from machine to outlet)

3.367.90

16.7531.5541.5053.05

PIPE WITH REINFORCED SPIRAL

AS 04 106AS 04 107AS 04 118AS 04 119

• Flexible PVC pipe, smooth interior shock-adsorption• It holds temperatures from -10 to 60°C• 25 m rolls BLACKRolls of pipe Ø 13/16Rolls of pipe Ø 15/20Rolls of pipe Ø 20/25Rolls of pipe Ø 26/32

33.2040.5545.8057.85

AS 04 121AS 04 122AS 04 123AS 04 124

• 50 m rolls WHITERolls of pipe Ø 13/16Rolls of pipe Ø 15/20Rolls of pipe Ø 20/25Rolls of pipe Ø 26/32

63.0077.1087.05

117.65FLEXIBLE OUTLET PIPE FITTINGS

AS 04 155AS 04 156AS 04 157

Elbow 90° for pipes Ø 15/20Elbow 90° for pipes Ø 10/14Elbow 90° for pipes Ø 6/9

1.450.651.07

AS 04 161AS 04 162AS 04 170

Tee 90° for pipes Ø 15/20Tee 90° for pipes Ø 10/14Tee 90° for pipes Ø6/9

0.650.501.03

AS 04 165AS 04 164AS 04 163

"Y" junction for pipes Ø 15/20"Y" junction for pipes Ø 6/9"Y" junction for pipes Ø 10/14

3.181.861.11

AS 04 171AS 04 172AS 04 173

Straight junction for pipes joining Ø 15/20Straight junction for pipes joining Ø 10/14Straight junction for pipes joining Ø 6/9

0.560.530.58

GALVANIZED PIPE-CLAMP FIXING

AS 04 191

AS 04 192

AS 04 193

AS 04 194

Endless pipe-clamp Ø 7-11. SingleBox 100 units




0.350.29/pc

0.400.30/pc

0.420.32/pc

0.450.34/pc

CHECK VALVE

AS 06 122AS 06 123

Check valve Ø 6/9 mmCheck valve Ø 10/14 mm

6.507.60

FLEXIBLE CONDENSATION OUTLET PIPE

AS 04 110

AS 04 111

AS 04 109

• Polyethylene of low density ivory colour• Stretches 1 metre• With a male/female sleeve50 m. Rolls of pipe Ø16-18Supply: 10 rollsSupply: 25 rolls50 m. Rolls of pipe Ø18-20Supply: 10 rollsSupply: 25 rolls50 m. Rolls of pipe Ø20

37.0031.00/pc25.00/pc

38.0032.00/pc26.00/pc

42.00AS 04 112AS 04 114AS 04 115AS 04 116

“Y” junction of Ø16 for flexible pipes with residue“Y” junction of Ø20 for flexible pipes with residue“Y” junction of Ø16-20 for flexible pipes“Y” junction of Ø16-20 at 45° for flexible pipes

4.505.502.252.50

AS 04 117 Collector 3 in Ø20 mm and outlet Ø32 mm 7.50CORRUGATED PIPE WITH PLAIN INNER SIDE

AS 04 129AS 04 128

• Polyethylene of low density ivory colour• Solar UV protection30 m. Rolls of pipe Ø1650 m. Rolls of pipe Ø20

27.0048.00




nd

"Y" junction

Tee “Y”Ø16 o Ø20with residue

Reinforced spiral

Tee “Y” Ø16-20parallel

Check Valve

Tee “Y”Ø16-20a 45°

Flexible pipe

Y junction

Tee

Elbow90°

Straightjunction

Endlesspipe-clamp

Transparent drain hose

04 RIGID DRAIN HOSECode Item Box units €

GREY RIGID PVC DRAIN HOSE

AS 04 201AS 04 202AS 04 203AS 04 204AS 04 205

Drain hose of Ø 16 (5 m. stretches)Drain hose of Ø 20 (5 m. stretches)Drain hose of Ø 25 (5 m. stretches)Drain hose of Ø 32 (5 m. stretches)Drain hose of Ø 40 (5 m. stretches)

0.75/mt0.80/mt1.00/mt1.40/mt1.90/mt

SLEEVE COUPLING

AS 04 211AS 04 212AS 04 213AS 04 214AS 04 215

Sleeve Ø 16Sleeve Ø 20Sleeve Ø 25Sleeve Ø 32Sleeve Ø 40

2001007550125

0.600.600.750.901.05

REDUCING SLEEVE

AS 04 221AS 04 222AS 04 223AS 04 224

Reduction from Ø 20 to Ø 16Reduction from Ø 25 to Ø 20Reduction from Ø 32 to Ø 25Reduction from Ø 40 to Ø 32

55010010090

0.700.700.851.15

ELBOW 90°

AS 04 231AS 04 232AS 04 233AS 04 234AS 04 235

Elbow Ø 16Elbow Ø 20Elbow Ø 25Elbow Ø 32Elbow Ø 40

2001006012575

0.550.550.701.001.50

ELBOW 45°

AS 04 241AS 04 242AS 04 243AS 04 244AS 04 245

Elbow 45° of Ø 16Elbow 45° of Ø 20Elbow 45° of Ø 25Elbow 45° of Ø 32Elbow 45° of Ø 40

601807540100

0.801.150.901.251.65

TEES 90°

AS 04 251AS 04 252AS 04 253AS 04 254AS 04 255

Tee of Ø 16Tee of Ø 20Tee of Ø 25Tee of Ø 32Tee of Ø 40

100754010050

0.650.700.951.302.00

REDUCING TEES

AS 04 261AS 04 262AS 04 263AS 04 264AS 04 265AS 04 266

Tee of Ø 25 graft 20Tee of Ø 32 graft 20Tee of Ø 32 graft 25Tee of Ø 40 graft 20Tee of Ø 40 graft 25Tee of Ø 40 graft 32

408080505050

1.301.551.552.652.702.75

THREADED SLEEVE MALE/TO GLUE FEMALE

AS 04 272AS 04 273AS 04 274

Sleeve 20 x 1/2"Sleeve 25 x 3/4"Sleeve 32 x 1"

1008050

0.650.801.05

THREADED SLEEVE FEMALE GLUE/TO THREAD

AS 04 276AS 04 277AS 04 278

Sleeve 20 x 1/2"Sleeve 25 x 3/4"Sleeve 32 x 1"

1007550

1.251.351.45

FEMALE CAP

AS 04 256AS 04 257AS 04 258AS 04 259

Female cap Ø20Female cap Ø25Female cap Ø32Female cap Ø40

1001008040

0.500.500.651.00

GRAFT TO PIPE

AS 04 289 Graft to pipe PVC Ø110-125 to Ø32 mm 2.45TEE-SOCKET FLANGE

AS 04 282AS 04 283AS 04 284AS 04 285

Flange Ø 20 x 1/2"Flange Ø 25 x 1/2"Flange Ø 32 x 1/2"Flange Ø 40 x 1/2"

3.403.403.703.95

GLUE

AS 04 291AS 04 293

Glue tube 125 cm3

Glue bottle of 500 gr with brush plug2.169.30

PVC PINCH-OFF PLIERS

MA 01 021 Mod. K-42 up to 1-1/2" (42 mm), working rack 6.50




nd

Sleevecoupling

Tubo desagüe flexible

Bandejas

Abrazadera

Collarín toma 20-1/2"25-1/2"

Racord recto 1/2"tubo Ø 15/20

Codo Ø 20Ø 25

Reducingsleeve

Elbow 90°

Elbow 45°

Tee 90°

Reducing TeeThreaded

sleeve

Threaded sleevefemale

Graft to pipe

Tee-socketflange

04 RIGID DRAIN HOSE “WHITE” COLOUR WITH JUNCTIONCode Item units/box €

• 2 m Rigid drain hose• White PVC fire protected• Solar UV protection• For condensated water (no pressure)• Rubber plug as spare part

Ø20 OUTLET DRAIN HOSE

AS 04 501AS 04 502AS 04 503AS 04 504AS 04 505AS 04 506AS 04 507

Ø20 Drain hose whiteØ20 Sleeve coupling whiteØ20 90° Elbow whiteØ20 45° Elbow whiteØ20 90° Tee whitePre-installation white junction Ø20White clamp Ø20

100303030303030

1.401.551.601.602.101.600.45


AS 04 511AS 04 512AS 04 513AS 04 514AS 04 515AS 04 517

Ø25 Drain hose whiteØ25 Sleeve complaint whiteØ25 90° Elbow whiteØ25 45° Elbow whiteØ25 90° Tee whiteWhite clamp Ø25

603030303030

1.901.852.002.002.300.55


AS 04 521AS 04 522AS 04 523AS 04 524AS 04 525AS 04 527

Ø32 Drain hose whiteØ32 Sleeve complaint whiteØ32 90° Elbow whiteØ32 45° Elbow whiteØ32 90° Tee whiteWhite clamp Ø32

403030303030

2.102.062.252.252.600.60

REDUCER JOINTS

AS 04 531AS 04 532

Ø25 to Ø20 reducer joint whiteØ32 to Ø25-Ø20 reducer joint white

3030

1.551.75

• Straight/corrugated tube connector

Code Item €

AS 03 935AS 03 936AS 03 937

• Connector with reductions of Ø14-16-18 and 20 (A)to corrugated tube (B)

Connector Ø16 to yellow tubeConnector Ø18 to red tubeConnector Ø20 to blue

2.252.252.25

• Fixing for drain hose

Code Item Units €

FIXING PIPE-CLAMP FOR DRAIN HOSE OR WIRE

AS 04 300AS 04 302

AS 04 301

AS 04 311AS 04 312AS 04 313AS 04 315AS 04 316AS 04 317

Adhesive plate for pipe-clampTP 6/C black screw clamp500 TP 6/C unitsConnection plug TP 8/C (single)500 units box TP 8/CPipe-clamp N100x2.5 - up to Ø25Pipe-clamp N200x4.5 - up to Ø47Pipe-clamp N280x4.5 - up to Ø81Pipe-clamp N280x4.5 - up to Ø81Pipe-clamp N280x4.5 - up to Ø81Pipe-clamp N280x4.5 - up to Ø81

100100

5 boxes100

5 boxes100/bag100/bag100/bag100/bag100/bag100/bag

0.190.06

0.05/pc0.07

0.06/pc0.70/bag3.81/bag5.40/bag0.70/bag3.81/bag5.40/bag

CA 07 969 ATC8 Plies (up to 8 mm) 25.00




nd

Adhesive plateConnection plug

B B B

Sleevecoupling

Elbow90°

Elbow45°

Te90°

Preinstallationunion Clamp clip

ATC8

A A A

Pipe clamp

04 BAD ODOURS VALVECode Item €

BAD ODOURS VALVE

AS 04 131

• It acts as a siphon (water trap) avoiding the badodors coming from the drainage pipe

• Joint Ø14-16 mm• Adaptor diameter Ø14 and Ø16 mm• Dimensions: Length 72 mm, Outer diam. 21 mmMod. ESV-146 9.50

FIXING FOR DRAIN HOSECode Item €

POLYAMIDE SIMPLE STAPLE WITH PLUG

AS 04 321AS 04 322AS 04 323AS 04 325

Fixing-Ring Ø 16 blackFixing-Ring Ø 18 blackFixing-Ring Ø 20 blackFixing-Ring Ø 25 black

100100100100

0.370.390.400.59

GALVANIZED METAL SIMPLE STAPLE

AS 04 331AS 04 333AS 04 335AS 04 337AS 04 339

Staple Ø 16Staple Ø 20Staple Ø 25Staple Ø 32Staple Ø 40

100100100100100

0.070.090.110.140.18

06 CONDENSATION EVAPORATOR FOR OUTSIDECode Item Max. evaporation

flow €

• Power supply 110/220V and consumption 2 Amp.• Can be serial assembled

AS 06 933 Condensation evaporator 1.5 l/h 85.00

GUIDE CHART:Refrigeration Dehumidification Suggestion

2.000 W2.500 W3.500 W4.500 W6.000 W

0.8 lts/h1.2 lts/h1.6 lts/h

2 lts/h3 lts/h

1 ud x AS 06 9331 ud x AS 06 9332 uds x AS 06 9332 uds x AS 06 9333 uds x AS 06 933

COMPACT DRAINAGE PUMPSCode Item €

PUMP «CP 100»

AS 06 811 • Max. flow rate: 18 lts/h• Max height of elevation: 20 m• Dimensions: 46 x 50 x 134 mm• Outlet pipe Ø6 x 5• Inlet filter• Voltage: 230V 50Hz, fast connection (included)• It can be fixed at wall, floor or ceiling1 Unit5 Unit

10 Unit

98.0094.00/pc90.00/pc




nd

Tob

efixed

with

vinyltape

Tob

efixed

with

vinyltape

Drainpipe

DrainpipeAdaptor

Air inlet(do notcover)

Air inlet(do notcover)

FOR 14 mm FOR 16 mm

Staple

Fix-ring

NO NEEDFOR DRAINING

HOSES

06 CONDENSATE REMOVAL PUMP WITH TANKVISIBLE INSTALLATION

Code Item Max. flow €

PUMP «MASTONE»

AS 06 801 • Tank of 300 cm3

• Elevation 2 mts• Discharge tube Ø6 x 4• Light function controller• Power: 10 W1 Box of 10 units

30 l/h60.00

56.00/pcPUMP «MASTONE PLUS»*

AS 06 803 • Tank 550 cm3

• Normal height 1.5 mts; max. 3.5 mts.• Tube outlet: Ø6 x 4• Power: 23 W• Sound level 40 dB• Weight: 1.6 Kg• Dimensions: 180 x 150 x 105 mm1 unit10 units

60 l/h

55.0050.00/pc

Code Item Max. flow €

PUMP «FLOWITA»

AS 06 960 • Tank of 185 ml• Height: 2 m• Dimensions: 135 x 106.5 x 55 mm• Power: 16W a 230V-50Hz• Thermal protection: 70°C• Sound level: 36 dB(A)1 Unit10+ Units

12 l/h

55.0052.00/pc

Code Item Max. flow €PUMP «MINIBLANC»

• Dimensions 115 x 182 x 55 mm• Weight: 460 gr• Input Ø 21 mm• Tube outlet Ø 6 mm

AS 06 140 MINI-BLANC BASIC• Max. height: 4 m.• Power: 11 W• Nivel sonoro 18dB (A)

6 l/h

74.00AS 06 141 MINI-BLANC DELUXE

• Max. height: 12 m.• Power: 16 W• Sound level: 21dB (A)

12 l/h

79.00

Code Item Max. flow €PUMP «GOBI»

AS 06 935 • Pump with horizontal mini tank• Max. height.: 15 mts• Max. elevation: 1 m• Dimensions: 286x61x53 mm• Discharge tube Ø6 mm

12 l/h

140.00




nd

NOThe solution to the

bothering condensate!MASTONE MASTONE PLUSMASTONE MASTONE PLUS

MASTONE

MASTONEPLUS

FLOWITA

MINIBLANC

GOBI

06 CONDENSATE REMOVAL PUMPCode Item Max.

flow rate €

PUMP MINI «EASY 10»Special for splits until 10 Kw

AS 06 003 • 3 Level float switch: Start/Stop/Alarm• Maximum elevation: 6 metres• Maximum impulsion: 1.5 metres• Power: 18 W• Noise level: ≤ 30 dB(A)• Voltage: 230V 50/60Hz• Dimensions: Pump: 55 x 55 x 42 mm

Detector: 55 x 38 x 36 mm1 Unit5 Units10 Units25 Units

85.0082.00/pc78.00/pc75.00/pc

AS 06 001 • Three level float switch: Start/Stop/Alarm• Maximum elevation: 6 metres• Maximum impulsion: 2 metres• Power: 18 W• Noise level: ≤ 32 dB(A)• Dimensions: Pump: 76 x 38 x 61 mm.

Detector: 55 x 38 x 36 mm1 Unit5 Units10 Units25 Units

10 l/h

110.00106.00/pc102.00/pc98.00/pc

SILENT MINI PUMP«SI 3080 / SI 3200»

• Three level float switch:– Start 16 mm– Stop 11 mm– Alarm 19 mm

• Discharge tube Ø 6/9 (see AS 04 101)

AS 06 006 Mod. SI 3080 (*)• Maximum elevation: 6 metres• Maximum impulsion: 1 metre• Power: 10 W• Noise level: ≤ 20.2 dB

8 l/h

128.00

AS 06 008 Mod. SI 3200 (*)• Maximum elevation: 6 metres• Maximum impulsion: 2 metres• Power: 18 W• Noise level: ≤ 32.4 dB

20 l/h

146.00

AS 06 032 Mod. SI 3000• Maximum elevation: 10 metres• Maximum impulsion: 3 metres• Power: 14 W• Noise level: ≤ 21 dB(A) 120.00

PUMP WITH FLOAT «SI 1730» (*)Special Cassettes and Splits up to 30 kW

AS 06 005 • Three level float switch: Start/Stop/Alarm• Maximum elevation: 10 metres• Maximum impulsion: 2.5 metres• Power: 35 W• Noise level: ≤ 42 dB

30 l/h

182.00PUMP WITH FLOAT «SI 3300»

Special Cassettes and Splits up to 30 kW

AS 06 007 • Three level float switch: Start/Stop/Alarm• Maximum elevation: 10 metres• Maximum impulsion: 3 metres• Power: 22 W a 230V 50/60Hz• Discharge tube Ø 6/9 (see AS 04 101)

30 l/h

154.00

(*) While supplies of this model last




nd

SI 1730

SI 2750

SI 3080SI 3200

EASY 10

SI 3000

1. Start2. Stop3. Alarm

3 levelfloatswitch

06 CONDENSATE REMOVAL PUMPCode Item Max.

flow rate €

INTEGRATED PUMP WITH TANK«EE 1650»

Special Air-conditioner up to 30 kW

AS 06 011 • Three level float switch:Start / Stop / Alarm

• Maximum elevation: 13 metres• Power: 35 W• Noise level: 52 dB• Dimensions:Pump: 159 x 84 x 100 mm.

30 l/h

222.00

CENTRIFUGAL PUMP WITH TANK«SI 1805 / 1820»

Special for HVAC andgas boilers

• Three level float switch: Start / Stop / Alarm• Maximum elevation: 5.4 m• Power: 90 W• Condensed temperature and acidity: 80°C, ph 3.4• Noise level: 47 dB

AS 06 013 SI 1805 (Tank 0.5 lts)• Dimensions: 195 x 130 x 122 mm 500 l/h 92.00

CENTRIFUGAL PUMP WITH TANK«SI 8200»

Special climate control andBoilers of condensed gas

•Three level float switch: Start/ Stop/ Alarm• Maximum elevation: 5 metres• Power: 70 W• Condensed temperature and acidity: 65°C, pH 2.5• Tank 2 lts• Noise level: 45 dB(A)

AS 06 016 SI 8200 500 l/h 84.00

PERISTALTIC PUMPS

• Maximum intake: 2 metres• Maximum elevation: 12 metres• Power: 11 W• Dimensions: 109 x 110 x 91 mm

AS 06 021 Mod. PE 5000Activated through compressor signal(no detection)

6 l/h

166.20

AS 06 022 Mod. PE 5100Activated through temperature sensors 221.60

AS 06 023 Mod. PE 5200Activated through a detection block of float(included) 182.90

PERISTALTIC PUMPBIG FLOW

AS 06 024 Mod. PE 6250• Designed to remove dirty water• Maximum intake: 2 metres• Maximum elevation: 10 metres• Power: 66 W• Dimensions: 134 x 171 x 282

25 l/h

372.00




nd

CONDENSATIONBOILERS>3,4 pH

CONDENSATIONBOILERS>3,4 pH

SI 1805

EE 1650

PE 5000

PE 6250

CONDENSATIONBOILERS

>2,5 pH

SI 8200

06 CONDENSATE REMOVAL PUMPS

Code Item Max.flow rate €

IN LINE PUMP«DELTA PACK 1082»

AS 06 031 • Maximum elevation: 6 metres• Built-in detector• Power: 10 W• Noise level: 21.5 dB(A)• Levels: Start 18 mm

Stop 12 mmAlarm 21 mm

• Internal dimensions: 165 x 165 x 60• External dimensions (duct): 750 x 80 x 60

8 l/h

130.00

PUMP FOR CASSETTES

AS 06 033 Mod. SI 2052• Maximum elevation: 0.95 metres• Power: 14 W• Noise level: 30 dB(A) at 1 metre• Including 1 level detection block• Tube outlet Ø10/14• Dimensions: 88 x 75 x 94

70 l/h

77.00

ACCESSORIES

AS 06 041AS 06 042AS 06 043AS 06 044AS 06 045AS 06 046

AS 06 047AS 06 051AS 06 052AS 06 053AS 06 054

AS 06 059

Reduction pipe Ø17 to Ø22Reduction pipe Ø17 to Ø32Reduction pipe Ø17 to Ø32 with flow reduc.Adapter self-fixing for tube of condensate Ø6/9Self-adhesive fixing base pump with screwsInsulating adhesive with double coat fordetection block 45 x 32 x 3 mmRubber tray-pump 50 cmExtending wire with 3 m connectorExtending wire with 5 m connectorFilter in-line for SI 1730 and SI 2750SI 2750 mounting kit composed of:– Ø 6/9 evacuation adaptor– Anti-vibration fixing kit– Rubber Ø 15 x 15 mm 90° elbow– Flexible derived Ø 15 adaptorControl switch (to operate an additional alarm)

7.509.35

11.004.854.65

2.556.90

18.0022.006.55

22.8027.00

SPARE PARTS

AS 06 055 SI 2858 Detection block SI 2750. SI 3080. SI 3100.SI 3200 and PE 5200 53.10

AS 06 025 PE 5002 Pipe for peristaltic pump PE 5000. PE 5100and PE 5200 18.50

AS 06 026 PE 5005 Pipe for peristaltic pump PE 6250 39.50

REPAIRS

AS 06 099 Checks the operation of the pump and the filter 18.00




nd

Detection block

Mounting kitSI 2750

Filter in-line

Adapterauto-fixing

Rubbertray-pump

Pipe for peristalticpump PE 6250

Pump forcassettes

Reduction pipe

Self-adhesivefixing base

Control switch

Extending wirewith connector

DELTA PACK1082

06 DRAINAGE PUMPSCode Item Max. flow €

FLOWATCH 2 PUMP

AS 06 950 • 3 Position float• Max. height: 4 metres• Max. intake: 1.5 m• Pump dimensions: 85 x 28 x 48 mm• Detector dimensions: 78 x 38 x 32 mm• Voltage: 220 V 50 HZ1 unit4 to 9 units10 to 24 units25+ units

10 l/h88.50

83.00/pc78.00/pc73.00/pc

ASSEMBLY ACCESORIES

AS 06 951 3 pieces assembly set for FLOWATCH 2 9.00

MINI FLOWATCH PUMP

AS 06 952 • Three level float switch• Max. height: 4 m• Max. intake: 1.5 m• Dimensions pump: 91 x 38 x 48 mm• Dimensions detector: 78 x 38 x 32 mm• For units of up to 10 kW1 unit4 a 9 units10 a 24 units25+ units

10 l/h73.00

69.00/pc66.00/pc62.00/pc

CONDENSATE REMOVAL PUMP WITH DUCTFLOWATCH DESIGN

AS 06 957 • Max. height: 4 metres• Max. intake: 1.5 metres• Power: 19W a 230V 50/60Hz• Reversible fixing plate

(for installation right or left)• Waterproof: IP64• Noise level: 21 dB(A)• Set including:

– Flowatch 2 pump– 80 x 60 x 800 mm duct– Elbow cover– Cover disc for wall fixing– Hose pump level– Cable with connector– Complete fixing accessories

10 l/h

106.00

PUMP FLOWATCH TANK 1,3L

AS 06 956 • Max. height: 5,5 metres• Tank: 1,3l• Power: 80W 220V 50/60Hz• Reversible fixing plate• Dimensions: 280 x 130 x 135 mm

600 l/h

75.00

PUMP FOR CASSETTES

AS 06 955 • Voltage: 220V 50Hz• Power: 8 W• Evacuation at 1000 mm: 20 l/h

at 300 mm: 50 l/h 68.00




nd

FLOWATCH 2assembly accesories

FLOWATCH 2

FLOWATCH DESIGN

MINI FLOWATCH

Pump forcassettes

FLOWATCH TANK 1,3L

NOVEDAD

Sólo21 dB

CONDENSATIONBOILERS

>2,5 pH

06 DRAINAGE PUMPS

• Pumps with tank for condensed liquidsCode Item €

PUMP «MINI TANK/COMPACT»

AS 06 104 • Maximum height 10 mts.• Motor 0,15 Amp. at 230V• Outlet Ø6 mm• Tank capacity: 0,24 litres• Maximum flowrate: 34 l/hour• Maximum temperature water: 40°C 93.00

AS 06 109 COMPACT FP2947 pump for condensation boilers(same characteristics as MINI TANK) 94,00

PUMP «HI-FLOW»

• Maximum height 4 mts.• 100 lts/h height 3 mts.• 200 lts/h height 1,5 mts.• Motor 0,6 Amp. at 220V• Automatic stop and start for each level• Inlet up to Ø25 mm• Outlet 1 Ø6 mm

AS 06 101 HI-FLOW tank 1 lt (Height 140, base 235x140 mm)1 Unit5 Unit

10 Units

92.0089.00/pc82.00/pc

AS 06 102 HI-FLOW tank 2 lts (Height 170, base 235x140 mm)1 Unit5 Units

10 Units

94.0091.00/pc84.00/pc

QUIET PUMP «HIGH-LIFT»

• Peristaltic pump• Flow rate: 11 lts/h height 12 mts.• Temperature: 0 a 100°C• Motor 0,4 Amp. a 220V• Automatic ON/OFF for each level• Safety level with auxiliary switch to stop device

AS 06 105 HIGH-LIFT tank 1 lt (Height 120, base 240x140 mm) 167.00AS 06 106 HIGH-LIFT tank 2 lts (Height 162, base 240x140 mm) 178.00

HIGH CAPACITY PUMP «HEAVY DUTY»

• Double level; one for the pump operation and theother for safety, with desconnection terminals of thedevice• Capacity tank 4 lts• Inlet 2 up to Ø40 mm• Outlet 1 Ø10 mm

AS 06 107

• Flow rate 900 lts/h• Outlet height 6 mts• Height 205, base 300 x 150 mmHEAVY DUTY 6 155.00

AS 06 108

• Flow rate 1250 lts/h• Outlet height 10 mts• Height 265, base 300 x 150 mmHEAVY DUTY 10 270.00

• Hot Water Pumps «Hot Water Tank»

Code Item €

ECONOMY HOT

AS 06 117

• Outlet height 6 mts• Flow rate 900 lts/h• Pastic tank 4 lts• Inlet pipe 2 up to Ø40 mm• Outlet pipe 1 Ø10 mmECONOMY HOT 423.00

HEAVY DUTY HOT

AS 06 116

• Outlet height 15 mts• Flow rate 1800 lts/h• Stainless steel tank 5 lts• Inlet pipe 2 up to Ø 40 mm• Outlet pipe 1 up to Ø15 mmHEAVY DUTY HOT 750.00




nd

HI-FLOW1 ó 2 lt

HIGH-LIFT

HEAVY DUTYECONOMY HOT

HI-FLOW0,5 lt

HEAVY DUTY HOT

MINI TANK0,24 lt

06 PERISTALTIC CONDENSATE PUMPS

Code Article €

PUMP «STANDARD»

AS 06 111 • To run dry, it connects in parallel to the evaporator incold circuits. 161.00

PUMP «MECHANICAL»

AS 06 114 • Includes control level system, mechanical floatand 3 m cable for remote control 177.00

PUMP «UNIVERSAL»

AS 06 112 • Includes 2 probes to start according to thetemperature gap (7°C) between the evaporator inletand outlet 199.00

PUMP «MK4 WATER SENSOR»

AS 06 113 • Includes level sensor, placed on the device, starts orstops the pump only when there is water to let out (5mm) 230.00

AS 06 121AS 06 120AS 06 122AS 06 123

Spare silicone pipeTin of grease with silicone tubeCheck valve 1/4" Ø 6/9 mmCheck valve 3/8" Ø 10/14 mm

17.8522.456.507.60

ANTI-THERMOSYPHON VALVE

AS 06 126 Anti thermosyphon valve 1/4" tube Ø6 7.00

CONDENSATE PUMPS WITH GUTTER

Code Article Max. flow €

PUMP «MINI LIME»

AS 06 119 • Maximum height: 8 metres• Maximum suction height: 1 metre• Power: 16W a 220V, 50/60Hz• Maximum flow rate: 14 lts/h• Sound: 21 dB• Pump dimensions: 79 x 99 x 44 mm• Weight: 0,31 Kg.1 Unit5 Units

10 Units25 Units

12 l/h

129.00125.00/unit119.00/unit109.00/unit

AS 06 159 Pump MINI LIME “Silent” 145.00PUMP «MAXI LIME»

AS 06 132 • Maximum height: 20 metres• Maximum suction height: 1 metre• Power: 18W a 220V, 50Hz• Reversible. It can be installed both

on the right or left of the device• Sound: 35 dB• Pump dimensions: 115 x 99 x 44 mm• Weight: 0.47 Kg.

35 l/h

162.00




nd

General features:- Height 175 mm, base 142 x 83 mm- Inlet height: 3 mts.- Outlet height: 12 mts.- Flow rate: 6.25 lts/h to 12 mts.- Temperature: 0 to 100° C.

- Testing switch- Possibility of running dry- Extremely quiet- Inlet pipe Ø6 mm

General features:– Reversible. It can be installed both on

the right or left of the device.– Level within the container: 9 mm Stop;

20 mm Start; 25 mm Security– Flat elbow with assembled pump– Gutter 800 mm of 70 x 65 mm– Polyinyl pipe Ø6 leng. 2 metres with

check valves

– Pipe connected to device Ø15/20500 mm

– Insulated Ø10x9 et l 750 mm– Hubcap to wall 70 x 65 mm– Screws and plugs to fix into wall– 2 white polyamide clamps

STANDARD

MECHANICALCheckvalve

Anthithermosyphon valve

06 CONDENSATE PUMPS“Multi Aplicación”

Code Item Caudalmáx. €

PUMP «MINI AQUA»

AS 06 100

AS 06 150

• Max. height: 8 mts.• Max. suction height: 1 metre• Power: 16W a 220V 50/60Hz• Dimensions: 28 x 28 x 165 mm• Discharge tube Ø6 mm included• Level tank

1 Unit5+ Units

10+ UnitsMINI AQUA «SILENT»

14 l/h100.00

97.00/unit94.00/unit

110.00PUMP «MINI ORANGE»

AS 06 115

AS 06 151

• Max. height: 8 metres• Max. suction height: 1 metre• Power: 16W• Voltage: 230V, 50/60Hz• Pump dimensions: 52 x 122 x 38 mm• Weight: 0,23 Kg.• 2 level tanks 42 x 75 x 40 mm

(1 to mount in the tray of the evaporator andanother to be mounted directly on the outlet

tube)1 Unit5+ Units

10+ UnitsMINI ORANGE «SILENT»

14 l/h

100.0097.00/unit94.00/unit

110.00

PUMP «MAXI ORANGE»

AS 06 118 • Max. height.: 20 m • Max. suction height: 1 m• Power: 18W• Voltage: 230V, 50Hz• Sound level: 35 db(A)• Pump dimensions: 66 x 122 x 44 mm• Weight: 0,45 Kg.• 2 level tank 42 x 75 x 40 mm

(1 to mount in the tray of the evaporator andanother to be mounted on the outlet tube)

37 l/h

122.00

CONDENSATE PUMPSCode Article Max.

flow €

PUMP «MINI M.P.I.»

AS 06 829 • Max. elevation: 8 metres• Max. intake: 2 metres• Power: 16W• Pump dimensions: 42 x 70 x 38 mm• Noise level: 19db (A) a 1 metre• Discharge tube Ø6 mm• 3 level float with 1 alarm level

1 Unit5+ Units

10+ Units25+ Units

14 l/h

75.0070.00/unit65.00 unit62.00/unit

CENTRIFUGAL PUMP WITH TANK «SE 300/4»Air conditioning and gas condensation boilers special

AS 06 840 • 3 level float switch: Start/Stop/Alarm• Max.elevation: 5 metres• Power: 70 W (0,67 A)• Condensate temp. : 65°C, 80°C in short intervals• Alarm contact 4 Amp.• Sound 45 dB class A at 1 m• 2 l tank• Anti-backflow clapper 1/4"• Dimensions: 279 x 130 x 171 mm• Pipe Ø10 mm PVC

1 Unit5+ Units

10+ Units

300 l/h

75.0070.00/unit65.00/unit




nd

ONLY 28 x 28 mmINSTALLED INSIDEGUTTER

28mm

2288 mmmm

CONDENSATIONBOILERS

>2,5 pH

CONDENSATE PUMPSCode Item Max.

Flow €

PUMP «VCMA-20S»

AS 06 901 • Max. height: 4.3 m• Flow at 4 m: 70 l/h• 3/8" retention valve incorporated• 1.9 litres tank• Voltage: 60W at 230V 50Hz• Dimensions: 178 x 288 x 127 mm• Weight: 2.4 Kg.1 unit5+ units

10+ units

294 l/h

88.0083.00/pc78.00/pc

PUMP «VCC-20S»

AS 06 900 • Max. height: 4.3 m• Flow at 4 m: 70 l/h• 3/8" retention valve incorporated• 1.1 litres tank• Voltage: 60 W at 230V 50Hz• Dimensions: 127 x 300 x 125 mm• Weight: 2.2 Kg.1 unit5+ units

10+ units

294 l/h

90.0085.00/pc80.00/pc

PUMP «VCL-24S»

AS 06 902 • Max. height: 5.9 m• Flow at 4 m: 450 l/h• 3/8" retention valve incorporated• 3.8 litres tank• Voltage: 150W at 230V 50Hz• Dimensions: 263 x 300 x 150 mm• Weight: 3.9 Kg.

900 l/h

180.00

MINI PUMP «EC-400»

AS 06 905 • 3 level float switch• Operation: ON/OFF/Alarm• Max. height: 12 metres• Intake: 1 metre• Flow at 4 m: 6 l/h• Power: 20 W at 230V, 50/60Hz• Dimensions:

Pump 110 x 35 x 45 mmDetector 80 x 37 35 mm1 Unit5+ Units

10+ Units25+ Units

14 l/h

98.0094.00/pc90.00/pc87.00/pc

PERISTALTIC PUMP FOR CONDENSED LIQUIDSCode Item €

• Max. intake: 2 metres• Max. height: 14 metres• Dimensions: 115 x 96 x 98 mm• Electrical wire: 2 metres• Alarm contact: 5 Amp• Voltage: 230V 50Hz• Power: 13W

PUMP «TPS»

AS 06 913 Triggered by air conditioning device 222.00

PUMP «TPT»

AS 06 914 Triggered by temperature in the switch sensor(difference of 5°C between the air inlet and outlet) 265.00

PUMP «TPR»

AS 06 915 Triggered by level control 305.00




nd

ONLY

mm127

VCC-20S

VCMA-20S

VCL-24S

EC-400

06 CONDENSATE PUMPS

Code Item Max. flowrate €

MINI-PUMP FOR DUCT«MERCURY»

AS 06 854 • Maximum height: 8 metres• Max. intake: 2 metres• Includes check valve• Voltage 230V 50/60Hz• Dimensions: 33 x 32 x 142.2 mm pump

43 x 34 x 74 mm sensor• Power: 12 W1 Unit5+ Unit10+ Unit25+ Unit

10 l/h

90.0087.00/unit84.00/unit80.00/unit

PUMP «MD 300 W»

AS 06 851 • Maximum height: 2.4 metres• Includes check valve• 0.8 tank• Outlet diameter: 3/8"• Voltage 230V 50/60Hz• Dimensions: 185 x 86 x 128.5 mm• Power: 42 W1 Unit10+ Unit

150 l/h

70.0065.00/unit

ACCESSORY

AS 06 852 Protective outside casing with pipe cover (right or left) 9.00

PUMP «MD 400»

AS 06 855 • Maximum height: 4 m• Includes check valve• 2 l tank• Voltage 220V 50/60Hz• Dimensions: 185 x 135 x 256 mm• Power: 85 W1 Unit10+ Units

237 l/h

70.0065.00/unit

PUMP «MD 600»

AS 06 856 • Maximum height: 5.5 m• Includes check valve• 2 l tank• Voltage 220V 50/60Hz• Dimensions: 185 x 135 x 256 mm• Power: 117 W

264 l/h

75.00

PUMP «MD 800»

AS 06 857 • Maximum height: 6.6 m• Includes check valve• 2 l tank• Voltage 220V 50Hz• Dimensions: 185 x 135 x 256 mm• Power: 195 W

276 l/h

100.00

OPTIONAL ACCESSORIES

AS 06 861 Auxiliary float switch (level control) 8.25

AS 06 862 Sound/light optional alarm 24.50




nd

Float switchSound/light

alarm

Mods. MD

MERCURY

MD 300 W

MD 300 W with casingfront view

MD 300 W with casingback view

Pumpmodel

Flow (liters/hour according to height)

0 m 2 m 4 m 6 m 8 m

MD 400 237 207 192 - -

MD 600 264 222 207 - -

MD 800 276 240 225 99 -

06 SUCTION PUMP FOR CONDENSATE REMOVAL

Code Item Max. flowrate €

• Extremely silent• Supply 230V• Thermal protection• Intake and output pipe: 6 mm ext. Ø• Operation by rotary diaphragm allows working in

suspension solids and dirty fluids.

“MINIBLUE” PUMP

AS 06 924 • Discharge height: 8 mts• Aspiration height: 5 mts• Consumption: 70 mA• Without sensor• Dimen.: W 66 x H 56 x L 105 mm

8 l/h

150.00

BOMBA “MAXIBLUE”

AS 06 928 • Discharge height: 8 mts• Aspiration height: 8 mts• Level sensor• Dimen.: W 56 x H 64 x L 160 mm

14 l/h

278.00

“BLUEDIAMOND” PUMP

• Flow 50 l/h• Discharge height: 20 mts• Aspiration height: 7 m• Dimen.: W 51 x H 64 x L 276 mm

50 l/h

AS 06 925 Blue Diamond Level• Detects water and starts. The auxiliary contact

disconnects the conditioner 262.00

AS 06 926 Blue Diamond Sensor• Two temperature probes model placed in

the air intake and outlet 262.00

07 ELECTRICAL ACCESSORIES•

Code Item €

AS 07 101AS 07 100

AS 07 102AS 07 103

Surface 16A at 250V earth wireSurface base 16A to 250V with exterior earthing trans-parent coverPlug “Schuko” 16A a 250V earth wirePlug “Schuko” 16A a 250V earth wire at 90°

2.60

3.101.551.85

ADAPTERS SURFACE/PLUG

AS 07 105AS 07 106

T adapter 2 ways 16 Amp.Cross adapter 3 ways16 Amp.

1.903.06

MULTIPLE SURFACE

AS 07 110AS 07 111AS 07 112

• Wire 1.5 m, 1.5 mm2

• Voltage 220/240V• 3500WMultiple surface 3 surfacesMultiple surface 4 surfacesMultiple surface 5 surfaces

5.005.856.50




nd

Level

Sensor

Maxiblue

BlueDiamond

Miniblue

Rotary diaphragmpump

3 waysadapter

2 waysadapter

Plug Schuko

Surface basetransparent cover

Surface

Multiple surface

BlueDiamond

07 ELECTRICAL ACCESSORIESCode Item €

INSULATING TAPE

AS 07 119AS 07 120AS 07 121AS 07 122

20 m x 19 mm Rolls of WHITE (48 units box)20 m x 19 mm Rolls of BLACK (48 units box)10 m x 19 mm Rolls of BLACK (80 units box)10 m x 19 mm Rolls of WHITE (80 units box)

1.10/roll1.10/roll0.55/roll0.55/roll

HELICOIDAL POLYETHYLENE CASE

• Polyethylene (PE) ldelayed flame• Colour white• Operation temperature: from -60°C to +80°C• Length: 30 metres

Type Øinternal Wide

Application (mm)min. max.

AS 07 241AS 07 242AS 07 243

SB PE 4SB PE 9SB PE 16

4916

7,812,516,0

51020

20100150

16.5037.2080.35

WIRE EXTENSION LEAD

AS 07 115AS 07 116

• Ground surface/plug• Section 3 x 1.5 mmLong 5 mLong 10 m

12.5022.20

BUILT IN MECHANISM BOXES

AS 07 271

AS 07 273

AS 07 275

• Material: ABS with screwsFour sides boxes• Dimensions 64 x 62 x 44Two elements universal box• Dimensions 140 x 70 x 44Three elements universal box• Dimensions 210 x 70 x 44

0.30

0.67

0.99«MAGNETOTHERMAL»PROTECTION SWITCH

SINGLE-PHASE Nom.Intens. A N°Poles

AS 07 203AS 07 205AS 07 206AS 07 207AS 07 208AS 07 209

NLS 10 - 1/NNLS 16 - 1/NNLS 20 - 1/NNLS 25 - 1/NNLS 32 - 1/NNLS 40 - 1/N

101620253240

1+N1+N1+N1+N1+N1+N

6.806.806.806.806.806.80

THREE-PHASENom.Intens.

A

Polenumber

AS 07 215AS 07 216AS 07 217AS 07 218AS 07 219AS 07 220

MVT 10 - 3/NMVT 15 - 3/NMVT 20 - 3/NMVT 25 - 3/NMVT 32 - 3/NMVT 40 - 3/N

101520253240

3+N3+N3+N3+N3+N3+N

10.4010.4010.4010.4010.4010.40

DIFFERENTIAL AIR SWITCH DOUBLE-POLE 30 mA

AS 07 231AS 07 232AS 07 234AS 07 235

MSL 25 - 1/NMSL 40 - 1/NMSL 40 - 3/NMSL 63 - 3/N

25404063

2244

31.5011.8018.2028.50

MAGNETOTHERMIC PROTECTION BOXES

AS 07 251

AS 07 252

CS2 for 1 magnetothermal bipolar switch• Dimensions: 130 x 51 x 60CS4 for 2 magnetothermal bipolar switches• Dimensions: 130 x 88 x 60

3.50

3.80

Model Type Measure Polenumber

AS 07 253AS 07 254AS 07 255AS 07 256

3 RC 643 RC 663 RC 683 RC 612

SurfaceIP40

200x110x94200x145x94200x180x94200x255x94

46812

10.5011.7513.5015.45

AS 07 263AS 07 264AS 07 265AS 07 266

3 RC 543 RC 563 RC 583 RC 512

Built inIP40

222x136x92222x170x92222x205x92222x280x92

46812

10.7512.6014.2016.75




nd

3 RC58

NSL

CS2

MSL

Built in boxes

Helicoidal case

Extension

CS4

3 RC68

Insulating Tape

07 ELECTRICAL ACCESSORIESFOR SPLIT ASSEMBLY

Code Item Box units €

TRANSPARENT CONNECTION LEAD

AS 07 131AS 07 132AS 07 133

Section 6 mm. 12 polesSection 10 mm. 12 polesSection 16 mm. 12 poles

1.201.702.70

CONNECTION BOXES

AS 07 141AS 07 142AS 07 143

Dimensions Ø80 x 45 mm (clip)Dimensions 80 x 80 x 50 (clip)Dimensions 100 x 100 x 55 (screw)

8106

1.20/pc1.50/pc2.60/pc

DUCT FOR ELECTRIC CONNECTION

AS 07 301AS 07 302AS 07 303

Miniduct 10-20 (80 units)Miniduct 16-16 (120 units)Miniduct 16-25 (80 units)

8012080

1.40/m1.70/m2.70/m

PIPE-CLAMP TO BIND AN ELECTRIC WIRE

• Self-extinguishable• Use: from -40 to 110°C

AS 04 311AS 04 312AS 04 313CA 07 955CA 07 958CA 07 959CA 07 961CA 07 962

• Natural polyamide colour BLACKLength 100 x 2.5 mm.Length 200 x 4.5 mm.Length 280 x 4.5 mm.Length 550 x 7.8 mm.Length 780 x 7.8 mm.Length 780 x 9 mm.Length 1000 x 12.5 mm.Length 1220 x 9 mm.

1001001001001001005050

0.70/bag3.81/bag5.40/bag

0.42/pc0.52/pc0.76/pc1.32/pc1.47/pc

AS 04 315AS 04 316AS 04 317

• Polyamide colour WHITELength 100 x 2.5 mmLength 200 x 4.5 mmLength 280 x 4.5 mm

100100100

0.70/bag3.81/bag5.40/bag

CA 07 969 ATC8 Pliers (fasten and cut up to 8 mm) 1 25.00

CA 07 970 ATC Pliers (fasten up a width of 13 mm) 1 88.00

AS 04 300 Adhesive plate for pipe-clamp. Perfect forfixing on glass, aluminium, stainless steel. 100 0.19/pc

STAPLE WITH STEEL SCREW

AS 07 284AS 07 285AS 07 286AS 07 287

Ø8 blackØ9 blackØ10 blackØ12 black

100100100100

4.86/box5.78/box7.00/box7.80/box

AS 07 293AS 07 294AS 07 295AS 07 296AS 07 297

Ø7 whiteØ8 whiteØ9 whiteØ10 whiteØ12 white

100100100100100

4.68/box4.86/box5.78/box7.00/box7.80/box

CABLE GLANDS

Model Ø Drill Box. Units

AS 07 322AS 07 323AS 07 324AS 07 325

QPG 11QPG 13QPG 16QPG 21

6101214

8121418

16212329

50505050

0.60/pc0.75/pc1.00/pc1.20/pc

THREADED CABLE GLANDS

AS 07 332AS 07 333AS 07 334AS 07 335

QTPG 11QTPG 13QTPG 16QTPG 21

50505050

0.25/pc0.28/pc0.30/pc0.40/pc




nd

10-20 16-16 16-25

Outlet through cones

BlackStaple

Adhesive plate

Cable glands

Threaded Cableglands

WhiteStaple

ATC 8 Pliers

ATC Pliers

100 uts. bags

07 ELECTRICAL ACCESSORIES FORAIR-CONDITIONING INSTALLATION

Code Item €

GREEN ELECTRICAL WIRE“Halogen Free”

AS 07 061AS 07 062AS 07 063AS 07 064AS 07 065AS 07 071AS 07 072AS 07 073AS 07 074AS 07 075AS 07 082AS 07 083AS 07 084

• Hose: RZ1K• Maximum Voltage: 1000 V• Reticulated polyethylene insulation and

covered by flame retardant poliolefinySection 3 x 1.5Section 4 x 1.5Section 5 x 1.5Section 6 x 1.5Section 8 x 1.5Section 3 x 2.5Section 4 x 2.5Section 5 x 2.5Section 6 x 2.5Section 8 x 2.5Section 3 x 4Section 4 x 4Section 5 x 4

Checkwebsite

for updatedprices

AS 07 093AS 07 094AS 07 095AS 07 096AS 07 097AS 07 098

• Acrylic hose VVK• Maximum voltage 750 VSection 3 x 1.5Section 4 x 1.5Section 5 x 1.5Section 3 x 2.5Section 4 x 2.5Section 5 x 2.5

Checkwebsite

for updatedprices

AS 07 015AS 07 016AS 07 002AS 07 012AS 07 006AS 07 014

Section 2 x 1.5Section 2 x 2.5Section 3 x 1.5Section 3 x 2.5Section 4 x 1.5Section 5 x 1.5

Checkwebsite

for updatedprices

BLACK ELECTRIC WIRE

AS 07 001AS 07 003AS 07 004AS 07 005AS 07 007AS 07 008AS 07 009AS 07 010AS 07 011AS 07 017AS 07 018AS 07 019AS 07 020AS 07 031

• Acrylic hose RVK• Maximum voltage 1000 VSection 3 x 1.5Section 3 x 2.5Section 3 x 4Section 4 x 1.5Section 4 x 2.5Section 4 x 4Section 5 x 1.5Section 5 x 2.5Section 5 x 4Section 6 x 1.5Section 6 x 2.5Section 8 x 1.5Section 8 x 2.5Section 10 x 1.5

Checkwebsite

for updatedprices

INTERCONNECTION WIRE

AS 07 051AS 07 052AS 07 053AS 07 054

• Maximum voltage 500 VSection 2 x 1 WHITESection 3 x 1 WHITESection 4 x 1 WHITESection 5 x 1 WHITE/BLACK

Checkwebsite

for updatedprices

* Wire prices may vary due to copper prices. PLEASE CONSULT




nd

Green electrical wire“Halogen Free”

For the installation in publicfacilities according to

ICT-BT

InterconnexionWire

100 metresrolls

50 metresrolls

100 metresrolls

100 metresrolls

100 metresrolls

Does not emitopaque fumesin case of fire

Does notspread fire

Does not emittoxic fumes in

case of fire

Does not emitcorrosive fumes

Does notspread flame

07 ELECTRICAL ACCESSORIES FORAIR-CONDITIONING INSTALLATION

Code Item Roll/metre €/roll

UNIPOLAR WIRE VK

• Hose: H07V-K• Insulating PVC T1 UNE 21031-1• Maximum voltage: 450/750V• Maximum operating temperature 90°C

AS 07 407AS 07 408AS 07 409AS 07 410AS 07 411

Section 1.5 mm BLACKSection 1.5 mm BLUESection 1.5 mm BROWNSection 1.5 mm GREYSection 1.5 mm EARTH

200 m200 m200 m200 m200 m Check

websitefor updated

pricesAS 07 413AS 07 414AS 07 415AS 07 416AS 07 417


200 m200 m200 m200 m200 m

UNIPOLAR WIRE“Halogen free”

• Hose: ES07Z1-K• Maximum voltage: 450/750V• Thermoplastic polyolefin insulation HFFR

TIZ1 UNE 211002. 1• Operation temperature 70°C

AS 07 457AS 07 458AS 07 459AS 07 460AS 07 461


200 m200 m200 m200 m200 m Check

websitefor updated

pricesAS 07 463AS 07 464AS 07 465AS 07 466AS 07 467


200 m200 m200 m200 m200 m

UNIPOLAR HALOGEN FREE PIPE

AS 07 522AS 07 523AS 07 527AS 07 529

Prewired 3x1.5 mm pipe Ø16Prewired 5x1.5 mm pipe Ø20Prewired 3x2.5 mm pipe Ø20Prewired 5x2.5 mm pipe Ø25

10010010050

FLEXIBLE PIPE WIRE PROTECTION

AS 07 151AS 07 152AS 07 154

• Material: BLACK PVC• Does not spread flames• To bed on wall and ceilingDiameter 12.6 / 16 (100 m rolls)Diameter 16.4 / 20 (100 m rolls)Diameter 20.6 / 25 (75 m rolls)

0.30/m0.33/m0.44/m

AS 07 161AS 07 162AS 07 164

• Material: GREY polypropylene• Does not spread flames• To bed cables on floor, wall, etc.Diameter 10.7 / 16 (100 m rolls)Diameter 14.1 / 20 (100 m rolls)Diameter 18.3 / 25 (75 m rolls)

0.58/m0.67/m1.00/m

LUBRICANT CABLE-LEAD THROUGH

MA 11 256 Can 1 Kg lubricating cable-lead through "FENIX" withspray 10.00




nd

PVC

Polypropylene

07 ROTATIVE SWITCH FOR OUTSIDE USECode Item €

EASY FIT ISOLATOR

AS 07 171AS 07 172AS 07 173AS 07 174

• 4 pole• IP66 electrical isolator• Voltage 230V. 50-60Hz• Easy to fix4 poles 20A model4 poles 32A model4 poles 40A model4 poles 63A model

30.0032.0038.0040.00

11 SPLITS PROTECTION SYSTEM• Exterior units covers

Code Item L H D €

"SUPER" series

•Supplied in shop's show box

AS 11 021AS 11 022AS 11 023AS 11 024

SmallMediumLargeExtralarge

760800860950

550600700850

270300350400

28.0029.0030.0034.00

• External units protective cages

Code Item €

AS 11 101AS 11 102AS 11 103

• Protects external units from leaves, birds, ballsCream colour paintedSmall CSPMedium CSMBig CSG

335.50422.00522.00

• Protection cage for outdoor units

Code Item €

AS 11 105AS 11 106AS 11 107

• Cream colour paintedSmall (1052 x 660 x 572 mm)Medium (1052 x 1060 x 572 mm)Big (1152 x 1360 x 572 mm)

247.00339.00431.00

• Condenser valve covers

Code Item €

AS 11 211 2 insulating flexible covers for split valves1/4" y 3/8"-1/2" 4.00




nd

Mod. EXTERNAL SIZES INTERNAL SIZESA B C A B C

CSPCSMCSG

70011001400

100011001100

450600600

60010001300

90010001000

350500500

SC

TF INSULATED AND LINED COPPER TUBE

Code SizeWall thickness

€ / Rollmm Insulation

25 metres ROLL

TF 01 431TF 01 433TF 01 434TF 01 438TF 01 435TF 01 436TF 01 437

1/4"3/8"1/2"5/8"5/8"3/4"7/8"

0.80.80.80.811

1.10

991010101010

Checkwebsite

for updatedprices

TF 01 461TF 01 463TF 01 464TF 01 467TF 01 465TF 01 466

1/4"3/8"1/2"5/8"5/8"3/4"

0.80.80.80.811

9910101010

Checkwebsite

for updatedprices

Note: Prices could be modified according to international market quotations, withoutany previous notice PLEASE CHECK

DOUBLE INSULATED AND LINED COPPER TUBE

Code Size Wall thickness€ / Roll

Copper Insulation

TF 01 411TF 01 412TF 01 419TF 01 413TF 01 417TF 01 418TF 01 414TF 01 415TF 01 416

Tubes 1/4"-3/8"Tubes 1/4"-1/2"Tubes 1/4"-5/8"Tubes 1/4"-5/8"Tubes 3/8"-1/2"Tubes 3/8"-5/8"Tubes 3/8"-5/8"Tubes 3/8"-3/4"Tubes 1/2"-3/4"

0.80.80.80.80.80.80.80.80.8

0.80.80.81

0.80.8111

9999999910

91010101010101010

Checkwebsite

for updatedprices

• Double insulated copper tube with flared joint

Code Size Wall thickness€ / Roll

Copper Insulation3 METRE ROLLS

TF 01 501TF 01 502TF 01 503TF 01 504TF 01 505

Tubes 1/4"-3/8"Tubes 1/4"-1/2"Tubes 1/4"-5/8"Tubes 3/8"-5/8"Tubes 3/8"-3/4"

0.80.80.80.80.8

0.80.8111

99999

910101010

40.0048.0065.0074.0085.00

5 METRE ROLLS

TF 01 511TF 01 512TF 01 513TF 01 514TF 01 515

Tubes 1/4"-3/8"Tubes 1/4"-1/2"Tubes 1/4"-5/8"Tubes 3/8"-5/8"Tubes 3/8"-3/4"

0.80.80.80.80.8

0.80.8111

99999

910101010

68.0079.00

100.00108.00116.00

Note: Prices could be modified according to international market quotations, withoutany previous notice PLEASE CHECK




nd

SPECIFICATIONS:

Insulation: Closed cell class self-extinguisableLining: A compact polyethylene coating with external protectionWorking temp.: from -45°C to +100°C

Flared jointand nut

SPECIFICATIONS:

Insulation: closed cell class self-extinguisableLining: a compact polyethylene coating with external protectionWorking temp.: from -45°C to +100°C

• Insulated tube accessoriesCode Item €

PAINT FOR INSULATION WITH UV PROTECTION

IA 20 903 1 Kg Can WHITE colour 30.74INSULATING SELF-ADHESIVE TAPE “WHITE”

IA 05 995 Ivory-white colour. Rolls of 10 m x 50 mm x 3 mm12 rolls per box

17.5015.15/pc

WHITE SELF-ADHESIVE TAPE “PLASTIESC 50”

AI 09 000 White colour. Rolls of 25 m x 50 mm48 rolls per box

3.403.00/pc

TF REFRIGERATION COPPER TUBE

Code Size Wall thick. (mm) Box cont. Ø Ext. tube (mm) € / Roll

“EUROPEAN” Norm 12735-1-2001

• 15 metres RollsTF 01 091TF 01 092TF 01 143TF 01 094TF 01 095TF 01 096TF 01 099TF 01 100TF 01 097TF 01 098

3/16"1/4"5/16"3/8"1/2"5/8"5/8"3/4"3/4"7/8"

0.7620.80.80.80.80.81

0.811

1412108655444

4.766.357.939.5212.7015.8715.8719.0519.0522.22

Checkwebsite

for updatedprices

* Options in bold: usual size according to Standard

COPPER REFRIGERATION TUBE COILSCode Item Wall (mm) Metres €

50 m. COILS - Norm 12735-1-2001

TF 01 181TF 01 183TF 01 184TF 01 185TF 01 186

Coil 1/4"Coil 3/8"Coil 1/2"Coil 5/8"Coil 3/4"

0.800.800.800.801.00

5050505050

Checkwebsite

for updatedprices

REFRIGERATION COPPER TUBE BARSCode Size Wall thick. (mm) Ø Ext. tube (mm) € / linear mt.

• 5 metres BarsRIGID COPPER PIPE (Norm EN 12735-1-2001)

TF 01 118TF 01 119TF 01 120TF 01 121TF 01 129TF 01 122TF 01 123TF 01 124TF 01 125TF 01 126TF 01 127TF 01 128TF 01 028TF 01 029TF 01 133TF 01 134TF 01 135

3/8"1/2"5/8"5/8"3/4"3/4"7/8"1"

1-1/8"1-1/8"1-3/8"1-5/8"2-1/8"2-5/8"3-1/8"3-1/8"3-5/8"

0.80.80.81

0.81111

1.251.251.251.251.651.652.52.5

9.5212.7015.8715.8719.0519.0522.2225.4028.5728.5734.9241.2753.9766.6879.3779.3792.08

Checkwebsite

for updatedprices

* Options in bold: usual size according to Standard




nd

Note: Prices could be modifiedaccording to international marketquotations, without any previous

notice: PLEASE CHECK

Note: Prices could be modifiedaccording to international marketquotations, without any previous

notce PLEASE CHECK

TF COPPER FITTINGS FOR AIR CONDITIONING

Code Size Units/box €

COUPLING SLEEVE FEMALE / FEMALE

TF 02 001TF 02 002TF 02 003TF 02 004TF 02 005TF 02 006TF 02 012TF 02 007

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

10010010010050502525

0.310.450.540.401.261.302.821.75

90° LONG ELBOW FEMALE / FEMALE


1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

1001001005025251010

2.762.482.982.842.983.768.255.44

90° ELBOW FEMALE / FEMALE

TF 02 041TF 02 042TF 02 043TF 02 044TF 02 045TF 02 046TF 02 047

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

10010010050502520

1.401.351.350.663.301.553.22

TEE

TF 02 081TF 02 082TF 02 083TF 02 084TF 02 085TF 02 086TF 02 087

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

1001005050252510

3.623.742.820.926.152.606.58


1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

1001001005050252520

3.703.452.621.004.942.05

10.304.24

TF 02 141TF 02 142TF 02 143TF 02 144

5/83/47/8

1 1/8

1111

16.3818.1019.6627.40

TF 02 163TF 02 164TF 02 165TF 02 166TF 02 167TF 02 169

3/8"1/2"5/8"3/4"7/8"

1 1/8"

10010050502520

2.302.221.123.163.405.98


1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

1001001005025252510

4.183.847.245.246.086.20

11.0010.20

Code Size Units/box €

REDUCER FEMALE / FEMALE

TF 02 101TF 02 103TF 02 102TF 02 106TF 02 105TF 02 104TF 02 109TF 02 108TF 02 107TF 02 137TF 02 112TF 02 111TF 02 110TF 02 136TF 02 115TF 02 114TF 02 113

3/8x1/4"1/2x1/4"1/2x3/8"5/8x1/4"5/8x3/8"5/8x1/2"3/4x3/8"3/4x1/2"3/4x5/8"7/8x3/8"7/8x1/2"7/8x5/8"7/8x3/4"

1-1/8"x1/2"1-1/8x5/8"1-1/8x3/4"1-1/8x7/8"

1001001001001001005050505050505025252525

2.981.421.221.161.161.103.103.062.602.202.002.002.063.503.503.503.50

TF 02 251TF 02 253TF 02 252TF 02 254TF 02 255TF 02 256TF 02 257TF 02 258TF 02 259TF 02 260

3/8-1/4"1/2-1/4"1/2-3/8"5/8-1/2"5/8-3/8"3/4-1/2"3/4-3/8"7/8-3/4"7/8-5/8"7/8-1/2"

1001001001001005050505050

1.301.561.561.401.403.103.102.052.052.20

TF 02 401TF 02 402TF 02 403TF 02 404TF 02 405TF 02 406TF 02 407

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

10010010010010010025

0.720.651.050.861.101.002.25

TF 02 201TF 02 202TF 02 203TF 02 204TF 02 205TF 02 206TF 02 207

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

115025101010

2.762.162.845.629.72

11.9025.12


1/4" x 1/4"5/16" x 5/16"3/8" x 3/8"1/2" x 1/2"5/8" x 5/8"3/4" x 3/4"7/8" x 7/8"

1-1/8" x 1-1/8"

5.365.365.369.705.365.365.365.90

(*) For other fittings and sizes, pleasecheckourREFRIGERATION Catalogue




nd

W 400 R

WC-403

TF PIPES FOR AIR CONDITIONING

Code Size Thickness mm Insulation mm €

PIPE (REEL 15 METRES)

TF 10 001TF 10 002TF 10 003TF 10 004

1/4"3/8"1/2"5/8"

0,80,81,01,25

22.1734.3845.9571.66

INSULATED SINGLE PIPE (REEL 25 METRES)

TF 10 011TF 10 012TF 10 013TF 10 014TF 10 015TF 10 016

1/4"3/8"1/2"1/2"5/8"5/8"

0,80,80,81,00,91,25

669999

44.0065.0085.2590.00

127.00134.00

INSULATED DOUBLE PIPE (REEL 20 METRES)

TF 10 021TF 10 022TF 10 023TF 10 024TF 10 025TF 10 026TF 10 027

1/4" - 3/8"1/4" - 1/2"1/4" - 1/2"1/4" - 5/8"1/4" - 5/8"3/8" - 5/8"3/8" - 5/8"

0,8 - 0,80,8 - 0,80,8 - 1,00,8 - 0,90,8 - 1,250,8 - 0,90,8 - 1,25

6/96/96/96/96/99/99/9

87.20103.40112.00132.45

-151.80158.35

NUT WITH ELASTOMERIC ADAPTOR

TF 10 101TF 10 102TF 10 103TF 10 104

Nut 1/4"Nut 3/8"Nut 1/2"Nut 5/8"

1.351.802.25

-

ANODISED ALUMINIUM FITTING

TF 10 111TF 10 112TF 10 113TF 10 114

Fitting 1/4"Fitting 3/8"Fitting 1/2"Fitting 5/8"

0.620.841.041.32

REEL STRING- WELDING ALUMINIUM-COPPERGALFLO ZnAlAg4

HF 07 318

• Low fusion temperature 440°-470°• Welds aluminium-aluminium/ aluminium-copper/

aluminium-brass• 200° below fusion temperature• With paint-stripperReel GALFLO ZnAlAg4 500gr. x 2mm

Checkwebsite

for updatedprices




nd

CHARACTERISTICS: It is composed of two metallic layers with no welding: an interiorcopper layer and an exterior aliminium layer. The two layers are joined by a consistentmetallurgical fusion of copper and aluminium, It can be used as an homogeneous pipewithout welding.

BIMETAL PIPE

+Copper

Aluminium

Copper

Aluminium

NEWNEW

TF COUPLING CONNECTIONS FOR SPLITS• Without welding• Direct connection to SAE coupling• Easy assembly and disassembly• Low cost• Meet the EN 378/1 and EN 378/2 standards• It prevents gas leakage due to defective welding

Code Item Boxes €

Whole set

COUPLINGS

TF 03 501TF 03 502TF 03 503TF 03 504TF 03 505

Set 1/4" x 0.8 SAESet 3/8" x 0.8 SAESet 1/2" x 0.8 SAESet 5/8" x 1 SAESet 3/4" x 1 SAE

1010101010

4.054.635.558.01

12.34CALIBRATION TOOL

TF 03 511TF 03 512TF 03 513TF 03 514TF 03 515

Tool 1/4" x 0.8Tool 3/8" x 0.8Tool 1/2" x 0.8Tool 5/8" x 1Tool 3/4" x 1

48.4449.9854.6159.3262.73

AI TUBE IDENTIFICATION PLATES

Code Item €

LABEL HOLDER WITH CLAMP

AI 28 101

• This system allows vertical or horizontal installation.• Includes plastic hoopsModel PT (20 pcs boxes) 10.23/pc

ELASTIC CLAMP

AI 28 105

•It allows enlarging the label holder diameterof the tube PTModel FAS 7.16

STICKERS

AI 28 108

• Supplied in Din A-4 leaves.Boxes of 10 white stickersModelo ETB 2.00

STICKERS SOFTWARE

AI 28 109 Software for stickers printing ETB 124.40




nd

1

ETB

Software

3

PT

FAS

2

Vertical or horizontaltube mounting

Label holder PT:Placing the

label

TF INSULATED UNIVERSAL DIVERSIONFOR MULTI-SPLIT SYSTEMS

• To be used with new refrigerants.• Can be cut according to your needs.• Insulation included.• Models 30 and 45 contain:

1 diverter for suction, 1 liquid line and 1 adaptor.• Model 90 contains:

1 diverter for suction line, 1 for liquid line and 3 adaptors( 7/8" to 1/4", 1/2" to 1" and 1/4" to 1/2")

Code ItemØ Suction Ø Liquid

€A B C A B C

TF 03 601 Kit nº 30 + Adaptor( 1" to 7/8")

1/2" to7/8"

3/8"to

7/8"

3/8"to

3/4"1/4" to 1/2" 85.00

TF 03 602 Kit nº 45 + Adaptor( 1" to 1-1/8")

5/8" to1"

1/2"to 1"

1/2"to

7/8"1/4" to 1/2" 88.60

TF 03 603 Kit nº 90 + Adaptors 1-1/8"to

1-1/2"

1" to1-1/2

"

1/2"to 1"

5/8"to

7/8"

1/2"to

7/8"

1/2"to

3/4"191.60

INSULATION UNIVERSAL COLLECTORSFOR MULTI-SPLIT SYSTEMS

• To be used with new refrigerants• Can be cut according to your needs• Insulation included

Code Item €

TF 03 604TF 03 605TF 03 606

Collector 5/8" suction-1/2" liquide 4 out both sidesCollector 5/8" suction-1/2" liquide 6 out both sidesCollector 3/4" suction-3/8" liquide 8 out both sides

142.00155.00164.00

WAY CHANGECode Item €

TF 03 525TF 03 526TF 03 527TF 03 528

* Joint Male/FemaleThread 1/4"-1/4"Thread 3/8"-3/8"Thread 1/2"-1/2"Thread 5/8"-5/8"

3.867.10

10.1012.94




nd

TF SET DIVERSION- DISTRIBUTORFOR MULTI-SPLIT SYSTEM AND M.V.D.

• Includes distributor GAS and LIQUID• Can be cut according to your needs• Without insulation

Code Item €

KIT DIVERTERS

TF 03 611TF 03 612TF 03 613TF 03 614

FQZHN-01FQZHN-02FQZHN-03FQZHN-04

56.0061.00

111.00198.00




nd

Line of LIQUID

Line of LIQUID

Líne of LIQUID

Line of LIQUID

Line of GAS

Line of GAS

Line of GAS

Line of GAS

FQZHN-01

FQZHN-03

FQZHN-02

FQZHN-04

DIMENSIONS

1/4" Ø6.353/8" Ø9.521/2" Ø12.705/8" Ø15.903/4" Ø19.05

7/8" Ø22.221" Ø25.401 1/8" Ø28.571 3/8" Ø34.921 5/8" Ø41.27

SIZES-EQUIVALENCES:




nd

TF BRASS FITTINGS “SAE”Code Size €

NUTS “SAE”

TF 03 071TF 03 076TF 03 072TF 03 073TF 03 074TF 03 075

1/4" SAE5/16" SAE3/8" SAE1/2" SAE5/8" SAE3/4" SAE

0.702.851.201.602.423.62

REDUCED NUTS “SAE”

TF 03 081TF 03 082TF 03 083TF 03 084

3/8" x 1/4"1/2" x 3/8"5/8" x 1/2"3/4" x 5/8"

1.402.102.404.80

COPPER JOINTS

TF 03 191TF 03 192TF 03 193TF 03 194TF 03 195

For tube in 1/4"For tube in 3/8"For tube in 1/2"For tube in 5/8"For tube in 3/4"

0.240.280.340.380.66

MALE/FEMALE COUPLING “SAE”FOR WELDING

TF 03 171TF 03 172TF 03 173TF 03 174TF 03 175

1/4"3/8"1/2"5/8"3/4"

1.502.603.284.209.15

MALE TEE “SAE”

TF 03 131TF 03 136TF 03 132TF 03 133TF 03 134TF 03 135

1/4"5/16"3/8"1/2"5/8"3/4"

5.409.209.20

12.8022.1526.30

FEMALE THREAD-NUT "SAE"FOR WELDING

TF 03 201TF 03 202TF 03 203TF 03 204TF 03 205

1/4" SAE to copper 1/4"3/8" SAE to copper 3/8"1/2" SAE to copper 1/2"5/8" SAE to copper 5/8"3/4" SAE to copper 3/4"

4.555.605.806.909.00

REDUCER FEMALE “GAS” /MALE “SAE”

TF 03 001TF 03 002TF 03 003TF 03 008TF 03 004TF 03 000TF 03 005TF 03 009TF 03 029TF 03 010TF 03 006TF 03 007

1/8" gas x 1/4" SAE1/4" gas x 1/4" SAE1/4" gas x 3/8" SAE1/4" gas x 5/8" SAE3/8" gas x 1/4" SAE3/8" gas x 3/8" SAE3/8" gas x 1/2" SAE1/2" gas x 1/4" SAE1/2" gas x 3/8" SAE1/2" gas x 1/2" SAE1/2" gas x 5/8" SAE3/4" gas x 5/8" SAE

1.462.202.445.502.564.622.903.265.324.424.608.10

REDUCER MALE - MALE“SAE” x “GAS”


1/4" SAE x 1/8" gas1/4" SAE x 1/4" gas3/8" SAE x 1/4" gas3/8" SAE x 3/8" gas3/8" SAE x 1/2" gas1/2" SAE x 3/8" gas1/2" SAE x 1/2" gas5/8" SAE x 1/2" gas3/4" SAE x 1/2" gas3/4" SAE x 3/4" gas

1.281.642.362.523.203.364.054.107.608.12

Code Size €

MALE x MALE NIPPLE “SAE”

TF 03 091TF 03 096TF 03 092TF 03 093TF 03 094TF 03 095

1/4"5/16"3/8"1/2"5/8"3/4"

1.161.952.203.405.106.80

MALE/FEMALE ELBOW “SAE”

TF 03 151TF 03 156TF 03 152TF 03 153TF 03 154TF 03 155

1/4" x 1/4"5/16" x 5/16"3/8" x 3/8"1/2" x 1/2"5/8" x 5/8"3/4" x 3/4"

3.527.804.206.407.82

16.72NUTS CUPSEAL

TF 03 181TF 03 182TF 03 183TF 03 184TF 03 185

For tube 1/4"For tube 3/8"For tube 1/2"For tube 5/8"For tube 3/4"

0.200.260.330.400.63

DOUBLE FEMALE SWIVELADAPTOR

TF 03 281TF 03 282TF 03 283TF 03 284TF 03 285

1/4" x 1/4" SAE3/8" x 3/8" SAE1/2" x 1/2" SAE5/8" x 5/8" SAE3/4" x 3/4" SAE

3.024.244.628.608.80

REDUCER MALE - FEMALE

TF 03 120TF 03 121TF 03 122TF 03 119TF 03 123TF 03 124TF 03 118TF 03 117TF 03 125TF 03 116TF 03 126TF 03 130TF 03 127TF 03 128TF 03 129

1/4" x 1/4" SAE1/4" x 3/8" SAE1/4" x 1/2" SAE1/4" x 5/8" SAE3/8" x 1/4" SAE3/8" x 3/8" SAE3/8" x 1/2" SAE3/8" x 5/8" SAE1/2" x 3/8" SAE1/2" x 1/2" SAE1/2" x 5/8" SAE5/8" x 3/8" SAE5/8" x 1/2" SAE5/8" x 3/4" SAE3/4" x 5/8" SAE

2.422.644.204.202.423.103.304.185.064.304.624.754.758.368.36

REDUCER MALE - MALE

TF 03 111TF 03 109TF 03 112TF 03 113TF 03 114TF 03 110TF 03 115

3/8" x 1/4" SAE1/2" x 1/4" SAE1/2" x 3/8" SAE5/8" x 3/8" SAE5/8" x 1/2" SAE3/4" x 1/2" SAE3/4" x 5/8" SAE

2.423.103.154.424.426.858.40

FEMALE x FEMALE NIPPLE “SAE”

TF 03 101TF 03 106TF 03 102TF 03 103TF 03 104TF 03 105

1/4" SAE5/16" SAE3/8" SAE1/2" SAE5/8" SAE3/4" SAE

2.454.354.235.187.309.60

FEMALE CAPS “SAE”

TF 03 041TF 03 042TF 03 043TF 03 044TF 03 045

1/4" SAE3/8" SAE1/2" SAE5/8" SAE3/4" SAE

0.701.902.603.605.45

MALE CAPS “SAE”

TF 03 051TF 03 052TF 03 053TF 03 054TF 03 055


0.901.752.403.125.60

AF PVC BRACKETS FOR TUBESCode Size Pieces per

box €/pc

RAPID-FIX WALL

AF 15 211 • Requires only a hammer to install• Drill hole with bit Ø10 mm• Max.diameter fastened tubes:54 & 38 mm 5 3.49

RAPID-FIX CANAL

AF 15 212 • Easy installation on threaded bar M8/M10• Max.diameter fastened tubes: 54 & 38 mm 5 2.77

FIX-RING CLIM

TF 04 131 • Requires only hammer to install• Complete solution for fastening split tubes:– Insulated tube 1/4" and 3/8"– Condensate tube Ø20 and Ø9– Electric power cable 1 0.58

RAPID-FIX CANAL

• Easy installation on duct of 30 or 41 mm

AF 15 171AF 15 172AF 15 173AF 15 174AF 15 176AF 15 177AF 15 178AF 15 179AF 15 181AF 15 182AF 15 183AF 15 184AF 15 185

Ø 6 mmØ 10 mmØ 12 mmØ 15 mmØ 20 mmØ 22 mmØ 25 mmØ 28 mmØ 35 mmØ 40 mmØ 42 mmØ 50 mmØ 54 mm

10101010101010101010101010

1.101.101.201.281.381.471.571.652.022.212.382.582.75

RAPID-FIX BAR

• Easy installation on threaded bar M8/M10

AF 15 191AF 15 192AF 15 193AF 15 194AF 15 196AF 15 197AF 15 198AF 15 199AF 15 201AF 15 202AF 15 203AF 15 204AF 15 205

Ø 6 mmØ 10 mmØ 12 mmØ 15 mmØ 20 mmØ 22 mmØ 25 mmØ 28 mmØ 35 mmØ 40 mmØ 42 mmØ 50 mmØ 54 mm

10101010101010101010101010

1.041.041.061.101.141.181.221.261.471.651.842.022.21

RAPID-FIX WALL

• Requires only hammer to install• Drill hole with bit Ø10 mm

AF 15 151AF 15 152AF 15 153AF 15 154AF 15 155AF 15 156AF 15 157AF 15 158AF 15 159AF 15 161AF 15 162AF 15 163AF 15 164AF 15 165

Ø 6 mmØ 10 mmØ 12 mmØ 15 mmØ 18 mmØ 20 mmØ 22 mmØ 25 mmØ 28 mmØ 35 mmØ 40 mmØ 42 mmØ 50 mmØ 54 mm

1010101010101010101010101010

1.281.281.391.471.471.571.661.741.842.212.382.582.752.94




nd

RAPID-FIX bar

RAPID-FIX canal

FIX-RING CLIM

RAPID-FIX canal

RAPID-FIX wall

RAPID-FIX wall

AI INSULATED BRACKETS FOR TUBES

It safely protects against formation of condensate and reduces the tube supportthermal losses, as per DIN 4140. part 2. art. 3. 4.

Code Item For tubesfrom ... to ... mm

Dimensions€Plate Insul. Nut

AI 07 401AI 07 402AI 07 403AI 07 404AI 07 405AI 07 406AI 07 407AI 07 408AI 07 409AI 07 410AI 07 411

1/4"3/8"1/2"3/4"1"1-1/4"1-1/2"2"2-1/2"3"4"

10 - 1415 - 1820 - 2526 - 2832 - 3540 - 4348 - 5059 - 6275 - 7888 - 90

112 - 114

20 x 320 x 320 x 320 x 320 x 330 x 330 x 330 x 330 x 340 x 440 x 4

1313131313131313191919

M8M8M8M8M8M10M10M10M10

F.1/2"-F.M.12F.1/2"-F.M.12

12.6213.1513.6214.3116.2418.3519.2924.1543.4359.5068.91

TF HEAVY DUCT PIPE CLAMPCode Size Pieces per box €

TF 04 301TF 04 302TF 04 303TF 04 304TF 04 305TF 04 306TF 04 307

Ø12Ø14-15Ø16Ø18Ø20Ø22Ø26

100100100100100100100

0.190.200.220.220.290.220.26


Ø18 (15-19)Ø22 (20-25)Ø28 (26-30)Ø35 (32-36)Ø40 (38-43)Ø48 (47-51)Ø54 (53-56)Ø60 (60-64)Ø70 (68-72)Ø75 (75-80)

50505050252525252525

0.801.021.071.131.141.301.311.401.361.42

VALVES FOR AIR CONDITIONINGCode Item €

TF 06 101TF 06 102TF 06 103TF 06 104TF 06 105

RR.603 1/4"RR.603 3/8"RR.603 1/2"RR.603 5/8"RR.603 3/4"

9.289.28

13.0616.2829.50

TF 06 111 RR.605 1/4" 9.00

VF STRAIGHT PASS VALVES WHEELCode Item €

VF 01 301VF 01 302VF 01 303VF 01 304VF 01 305

CT-D-04CT-D-06CT-D-08CT-D-10BL - 6 F


12.0013.5015.5020.8039.71

VF 01 351VF 01 352VF 01 353VF 01 354VF 01 355VF 01 356

CT-D-04SCT-D-06SCT-D-08SCT-D-10SBL - 6 SBL - 7 S

1/4" ODS3/8" ODS1/2" ODS5/8" ODS3/4" ODS7/8" ODS

12.0013.5015.5020.8038.5042.75




nd

TO THREAD

TO WELD

BRACKET

+ SUPPORT

1/4" Plug of VALVE CORE

BRACKETM6

WITHOUT VALVE CORE

BRACKETM6

TF LOADING VALVES AND ACCESSORIES• Valve cores

Code Item €

SOLDERING SERVICE VALVE (NO CAP NO CORE)

TF 06 000TF 06 004TF 06 033

1/4" soldering without cap nor valve core1/4" soldering SAE without cap nor valve core5/16" soldering without cap nor valve core

0.940.952.32

THREAD SERVICE VALVE

TF 06 002TF 06 032

1/4" SAE thread with normal cap1/4" SAE thread with cap with key

1.651.75

SOLDERING SERVICE VALVE

TF 06 001TF 06 031

1/4" soldering with normal cap1/4" soldering with cap with key

0.881.10

SOLDERING SERVICE VALVE WITH TUBE

TF 06 009TF 06 010TF 06 011

1/4" Soldering with 45 mm tube. Cap1/4" Soldering with 100 mm tube. Cap5/16" Soldering with 45 mm tube. Cap

1.351.601.40

VALVE CORE SPARE

TF 06 005 Valve core spareBags of 100 units

0.420.38/pc

CAPS

TF 06 181TF 06 182TF 06 183

Knurl cap 1/4" without key-toolKnurl cap 1/4" with key-tool to dismount valve coreKnurl cap 5/16" without key-tool

0.500.801.65

TOOLS TO EXTRACT VALVE CORES

TF 06 021TF 06 025TF 06 022TF 06 023TF 06 024TF 06 026TF 06 027

Mini valve key-toolMetallic key-tool CTV1Valve key-tool with handle CTValve core tool screwer A 3200Valve core separator without charge looseValve core separator without charge loose R410 (5/16")Valve core separator with closing valve

6.506.503.00

17.25120.00106.4032.50

JOINING SLEEVE WITH VALVE CORE AND CAPTF 06 051TF 06 052TF 06 053TF 06 054TF 06 055TF 06 056TF 06 057TF 06 058

1/4" x 1/4" ODS5/16" x 5/16" ODS3/8" x 3/8" ODS1/2" x 1/2" ODS5/8" x 5/8" ODS3/4" x 3/4" ODS7/8" x 7/8" ODS1-1/8" x 1-1/8" ODS

5.365.365.369.705.365.365.365.90

MALE T COUPLING FOR VALVE CORE

TF 06 007TF 06 003

1/4" NPT x 1/4" charge x 1/4" SAE1/8" NPT x 1/4" charge x 1/4" SAE

3.852.90

TF 06 008 1/4" SAE x 1/4" charge x 1/4" SAE 2.90

TF 06 017 1/4" SAE revolving x 1/4" charge x 1/4" charge 6.00

VALVE CORE-JOINT SET. Ref. 4000

TF 06 028 Mounting kit composed of:1 valve to dismount and replacement valve cores20 valve cores20 1/4" SAE rubber joints20 5/16" SAE rubber joints10 hose depressors5 3/8" empty pipe joints 36.00

• Charge and intervention valvesCode Item €

• It allows charging and measuring the pressure at anypart of the system

VALVES WITH FLANGE «BPV»

TF 06 121TF 06 122TF 06 123TF 06 124TF 06 125

BPV - 21 for 1/2" and 5/8"BPV - 31 for 1/4", 5/16" and 3/8"BPV - 36 for 3/16"BPV - 34 for 3/4"BPV - 78 for 7/8"

7.306.008.20

33.2033.20




nd

Fig. B

Fig. A

BPV

A 3200

CTV1

CT

Fig. C

Fig. A

Fig. B

Fig. C

Valve core1/4 SAE

IA TUBULAR INSULATION ROLL (M1 Class)Code

Item Linear meter Full boxRef. Ø Nom. Ø Copper Ø Iron Box cont. € €

6 mm THICKNESS (D)

IA 04 001IA 04 002IA 04 003IA 04 004IA 04 005IA 04 006IA 04 007IA 04 008

6 x 610 x 612 x 615 x 618 x 622 x 625 x 628 x 6

610121518222528

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

————

3/8"1/2"—

3/4"

496364316266220180152130

0.400.480.550.650.730.821.161.31

0.390.450.520.610.690.771.101.25

9 mm THICKNESS (F)

IA 04 021IA 04 022IA 04 023IA 04 024IA 04 025IA 04 026IA 04 027IA 04 028

6 x 910 x 912 x 915 x 918 x 922 x 925 x 928 x 9

610121518222528

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

————

3/8"1/2"—

3/4"

35226623419216613610898

0.690.730.770.931.001.111.251.52

0.650.700.740.890.941.061.191.45

13 mm THICKNESS (F)

IA 04 052IA 04 053IA 04 054IA 04 055IA 04 056IA 04 057IA 04 058

10 x 1312 x 1315 x 1318 x 1322 x 1325 x 1328 x 13

10121518222528

3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

———

3/8"1/2"—

3/4"

172162136118988078

1.411.441.601.761.892.082.40

1.341.371.521.671.801.982.28

19 mm THICKNESS (F)

IA 04 071IA 04 072IA 04 073IA 04 074IA 04 075IA 04 076IA 04 077

10 x 1912 x 1915 x 1918 x 1922 x 1925 x 1928 x 19

10121518222528

3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

———

3/8"1/2"—

3/4"

98887872645048

2.282.372.953.363.543.794.13

2.162.252.803.193.363.603.93

For different size and thickness, please see our "MERCAILLAMENT" INSULATION CATALOGUE

ACCESSORIESCode Item Box content €/Roll

INSULATING SELF-ADHESIVE TAPE

IA 05 991

IA 05 992

IA 05 993

IA 05 994

IA 05 995

• Rolls of 10 mt x 50 mm x 3 mmTape ISOCELLFull box: 24 rolls• Rolls of 10 mt x 100 mm x 3 mmTape ISOCELLFull box: 12 rolls• Rolls of 15 mt x 50 mm x 3 mmBLACK tape• Rolls of 30 mt x 50 mm x 3 mmBLACK tape• Rolls of 10 mt x 50 mm x 3 mmTape WHITE, ivory colourComplete box (12 rolls)

24

12

12

10

1212

13.4511.25

26.9022.50

20.25

40.50

17.5015.15

GLUE

AI 20 000AI 20 001

0.5 kg Can of glue1 kg Can of glue

4.658.35

SOLVENTS

AI 20 051 1 lt Can of solvent for cleaning tools, brushes... 16.10INSULATING PAINT

IA 20 901IA 20 902IA 20 903

Can 1 Kg GREYCan 1 Kg BLUECan 1 Kg WHITE

30.7430.7430.74

SPECIAL KNIFE FOR INSULATION TUBES

AI 23 001AI 23 002

Knife with 5 spare blades in the handleSet of 10 spare blades special knife for insul. tubes

36.0013.75



nd


®Isocell

μ 7,000

SUPERFLEXIBLE

AI FLEXIBLE TUBULAR INSULATIONClass ST.M1

Code ItemInternal diameter BOX

cont.lineal meter

€mm Copper Iron

AI 04 170AI 04 171AI 04 172AI 04 173AI 04 174AI 04 175AI 04 176AI 04 177

6 x 1910 x 1912 x 1915 x 1918 x 1922 x 1925 x 1928 x 19

610121518222528

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

–———

3/8"1/2"—

3/4"

10098887872645048

2.803.373.703.934.234.665.065.54

AI 04 197 6 x 25 6 1/4" — 64 5.57

AI 04 301AI 04 236AI 04 237AI 04 239AI 04 238

15 x 3018 x 3022 x 3025 x 3028 x 30

1518222528

5/8"3/4"7/8"1"

1 1/8"

–3/8"1/2"

–3/4"

5250242424

6.967.087.167.898.47

AI 04 111AI 04 112AI 04 113AI 04 114AI 04 259AI 04 260AI 04 267AI 04 257

6 x 4010 x 4012 x 4015 x 4018 x 4022 x 4025 x 4028 x 40

610121518222528

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

-1/8"

-1/4"3/8"1/2"

–3/4"

2424242222221616

10.3011.1311.9912.5612.7513.0314.0114.99

AI 04 115AI 04 116AI 04 117AI 04 286AI 04 282AI 04 283AI 04 284

10 x 5012 x 5015 x 5018 x 5022 x 5025 x 5028 x 50

10121518222528

3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

1/8"-

1/4"3/8"1/2"

–3/4"

14141214121010

22.9324.1925.8726.2728.3229.7831.83



nd


SPANISH REGULATIONS (R.I.T.E.) ON COLD FLUIDSSpanish regulations on Building Heating Installations (RITE2007)state the minimum installation insulation thickness for a material with thermal conductivity re-ference 10°C of 0.040Kw/ (m-K). These figures have been recalculated and optimized by applying the standardized formula for K-flex insulation thermal con-ductivity figures. The following table details all resulting figures. Please check for further information. We can provide technical data.Temperature up to 100°C: FLEXIBLE TUBE INSULATION class ST.M1

REGULATIONS RITE ON COLD FLUIDS:COPPER

TubeIRONTube

ØTemperature

INSIDE the building OUTSIDE the building-10 / 0°C 0 / 10°C + 10°C -10 / 0°C 0 / 10°C + 10°C

1/4" – 6 Thickness 25 19 19 40 40 40Code AI 04 197 AI 04 170 AI 04 170 AI 04 111 AI 04 111 AI 04 111

3/8" 1/8" 10 Thickness 30 19 19 50 40 40Code * AI 04171 AI 04171 AI 04 115 AI 04 112 AI 04 112

1/2" – 12 Thickness 30 19 19 50 40 40Code * AI 04 172 AI 04 172 AI 04 116 AI 04 113 AI 04 113

5/8" 1/4" 15 Thickness 30 19 19 50 40 40Code AI 04 301 AI 04 173 AI 04 173 AI 04 117 AI 04 114 AI 04 114

3/4" 3/8" 18 Thickness 30 19 19 50 40 40Code AI 04 236 AI 04 174 AI 04 174 AI 04 286 AI 04 259 AI 04 259

7/8" 1/2" 22 Thickness 30 19 19 50 40 40Code AI 04 237 AI 04175 AI 04175 AI 04 282 AI 04 260 AI 04 255

1" – 25 Thickness 30 19 19 50 40 40Code AI 04 239 AI 04 176 AI 04 176 AI 04 283 AI 04 267 AI 04 256

1 1/8" 3/4" 28 Thickness 30 19 19 50 40 40Code AI 04 238 AI 04 177 AI 04 177 AI 04 284 AI 04 257 AI 04 257

• Thermal conductivity λ: 0.033 W/mk at -20°C0.035 W/mk at 0°C0.037 W/mk at +20°C

• Temperature range: tube-45 at 116°C / blanket: -45 at 85°C• Permeability: ≥ μ 7.000

• Flexibility: Excellent• Fire: M1• Noise level: 32 dB (A)• Thickness: 65±10 Kg/m3

• Standard length: 2 mts

μ 10,000

INSULATIONGROUP

INSULATIONGROUP

IA ROLL OF TUBULAR INSULATIONCode Item Internal diameter BOX cont.

€

mm Copper Iron Box6 mm THICKNESS

IA 04 901IA 04 902IA 04 903IA 04 904IA 04 905IA 04 906IA 04 907

6 x 610 x 612 x 615 x 618 x 622 x 628 x 6

6101215182228

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

----

3/8"1/2"3/4"

50464038302320

41.3441.3441.3441.3441.3441.3441.34

9 mm THICKNESSIA 04 911IA 04 912IA 04 913IA 04 914IA 04 915IA 04 916IA 04 917

6 x 910 x 912 x 915 x 918 x 922 x 928 x 9

6101215182228

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

----

3/8"1/2"3/4"

40343127231914

41.3441.3441.3441.3441.3441.3441.34

13 mm THICKNESSIA 04 921IA 04 922IA 04 923IA 04 924IA 04 925IA 04 926IA 04 927

6 x 1310 x 1312 x 1315 x 1318 x 1322 x 1328 x 13

6101215182228

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

----

3/8"1/2"3/4"

26231817151410

41.3441.3441.3441.3441.3441.3441.34

• Insulation rolls and sheetsCode. Item Box Cont. €/m²

SHEET M1AI 04 361AI 04 362AI 04 363AI 04 364AI 04 365

PL 06 (2000 x 1000)PL 10 (2000 x 1000)PL 13 (2000 x 1000)PL 19 (2000 x 1000)PL 25 (2000 x 1000)

4832241612

15.9720.6225.9639.5744.45

M1 ROLLAI 04 371AI 04 372AI 04 373AI 04 374AI 04 375

R 06 (30 x 1 m)R 10 (20 x 1 m)R 13 (14 x 1 m)R 19 (10 x 1 m)R 25 (8 x 1 m)

302014108

15.9720.6225.9639.5744.45

SELF-ADHESIVE M1AI 04 381AI 04 382AI 04 383AI 04 384

RA 06 (30 x 1 m)RA 10 (20 x 1 m)RA 13 (14 x 1 m)RA 19 (10 x 1 m)

30201410

19.4024.6730.4146.09

ADHESIVE TAPESCode Item Rolls box €/pc

AI 09 000AI 09 001AI 09 002

PLASTIESC 50 white (roll 25 m x 50 mm)PLASTIESC 50 black (roll 25 m x 50 mm)PLASTIESC 50 gray (roll 25 m x 50 mm)Order of 48 rolls (1 box)Order of 96 rolls (2 boxes)

484848

3.403.403.403.002.85

“NEWCOBON” ALUMINIUM TAPE 30 MICRASAI 09 031 NEWCOBON roll 50 m x 50 mm

Order of 24 rolls (1 box)Order of 48 rolls (2 boxes)

24 5.405.004.90

AI 09 032 NEWCOBON roll 50 m x 65 mmOrder of 20 rolls (1 box)Order of 40 rolls (2 boxes)

20 6.756.256.05

AI 09 033 NEWCOBON roll 50 m x 75 mmOrder of 16 rolls (1 box)Order of 32 rolls (2 boxes)

16 8.207.557.30

AI 09 034 NEWCOBON roll 50 m x x 100 mmOrder of 12 rolls (1 box)Order of 24 rolls (2 boxes)

12 10.9010.009.65

ALUMINIUM TAPE 50 MICRASAI 09 017 ALUESC 50 (roll 50 m x 50 mm)

Order of 24 rolls (1 box)Order of 48 rolls (2 boxes)

24 8.507.607.20

AI 09 018 ALUESC 65/50 (roll 50 m x 65 mm)Order of 20 rolls (1 box)Order of 40 rolls (2 boxes)

20 10.509.509.00

AI 09 019 ALUESC 75/50 (roll 50 m x 75 mm)Order of 16 rolls (1 box)Order of 32 rolls (2 boxes)

16 12.6011.4010.75



nd


K-FLEX ST

Operation temperature: -40°C to +105°CThermal conductivity: λ 0°C = 0.035 W/(m.K)Tightness factor: M > 7000Fire resistance: M1Box dimensions: 50 x 50 x 20 cm

Easy transportin all kind ofvehicles

INSULATIONGROUP

PVCPLASTIESC tape

ALUESC: Light blue adhesive tapeNEWCOBON: Transparent adhesive tape

VERY IMPORTANT!Our roll length is

OTHER SUPLIERS 50 Yards = 45 m.

SpecialDelivery4 weeks

Note: For rolls of 50 micronplease check Price List Insulations

Aluminium tape

TF FIXING SYSTEMS FOR INSULATED PIPES

• Wall fixingCode Model Box units €

• Chromium-plated with 8 microns• Drilling fixing on base

“GRIP LOCKS”

TF 04 151 Type 1 (54 x 30 mm)pipe size 1/4" liquid up to 1/2" gas 10 1.50



TF 04 154 Type 4 (80 x 46 mm)pipe size 5/8" liquid up to 1-1/8" gas 10 1.85

HANGER FOR INSULATED PIPES•Threaded bar

Code Model For pipes Box units €

• Chromium-plated with 8 microns• For use on threaded bar M8, M10

TF 04 161 BBJ-2 5/8" and 3/8" 10 2.50

TF 04 162 BBJ-3 7/8" and 1/2" 10 2.60

TF 04 163 BBJ-4 1-3/8" and 5/8" 10 2.70

ANTI-CONDENSATION TAPE FOR REFRIGERATIONCode Model €

IA 10 206

• Preformed ribbon made frombituminous resin and cork

• Work temperature: -30 to +80°C• Protected with silicone paper8.5 mts x 50 mm x 3 mm roll 13.10

SILICONE SEALINGCode Model €

SEALING DUCTS AND JOINTS

AI 19 001AI 19 002

AI 19 011

Tube 300 cm silicone, WHITE colourTube 300 cm silicone, TRANSLUCENT colour25 units (1 box)Sealing gun H175 with gear rack application

3.603.60

3.00/pc4.10




nd

Tipo 4

80

46

B

C

A

Rod

BBJ Fixing

Insulated Tube

Electric wire

Dimensions (mm)

A B C

75 55 35

87 62 35

100 70 35

AV ANTIVIBRATION DAMPERSCode Item Thread Load

Kg €/pc

THREADED BARS ON BOTH SIDES

AV 01 000AV 01 034AV 01 035AV 01 005

A 20A 30E w/ washers & nuts Ø30 height 25 mmA 40E w/ washers & nuts Ø38 height 33 mmA 28/20 with 20-30 mm threaded bar

M6M8M8M8

12508025

1.261.401.601.38

AV 01 001 A 35b "soft grey"• 100 pcs M8 30 0.86

0.70/pc

AV 01 002 A 35 black• 100 pcs• 250 pcs• 500 pcs

M8 500.66

0.55/pc0.50/pc0.44/pc

AV 01 006 Antivibrator A35 black "INOX" M8 50 1.25

AV 01 003 A 45• 50 pcs• 100 pcs• 250 pcs

M8 851.16

1.05/pc0.86/pc0.70/pc

AV 01 004 A 6045 M10 250 4.75

FLAT WITHOUT THREADED BARS CONIC SYSTEM

AV 01 008AV 01 010AV 01 011AV 01 012AV 01 013AV 01 014

A 25A 30A 60A 70A 90A 130

M8M8M12M12M12M16

4580150350850

1.500

2.002.255.45

10.9511.0530.15

SURFACE WITH THREADED BARS AND NUTS

AV 01 020 S 40• 50 pcs• 100 pcs• 250 pcs

M8 20 to 451.40

1.35/pc1.20/pc0.90/pc

AV 01 021 S 60• 50 pcs• 100 pcs• 250 pcs

M10 80 to 1503.20

2.45/pc1.76/pc1.50/pc

AV 01 022 S 70• 24 pcs.• 48 pcs.• 100 pcs.

M12 120 to 3505.25

4.70/pc4.15/pc3.60/pc

AV 01 023AV 01 024AV 01 025

S 90S 120S 160

M12M16M16

450 to 850950 to 1.5001000 to 1.750

8.7016.1038.80

COMPLETE FOR OUTSIDE

AV 01 018AV 01 028

ANTI (Stainless. AISI 304)ANTI-1 (Galvanized steel)

M8M8

3535

7.453.30

FIXING PLATE SURFACE WITH THREADED BAR

AV 01 031AV 01 032

A 35 / BA 45 / B

M8M8

12 to 5020 to 85

2.152.80

PLATE TO BE FIXED IN THE GROUND

AV 01 332AV 01 333

• Comprises washers and screw• Rubber base 110 x 50 mmBT-60 height 60BT-75 height 75

M8M8

50 to 15050 to 150

1.651.85

LOW PROFILE SURFACE AND GREAT DIAMETER OFSUPPORT "LONG BEACH"

• With fixing claws

AV 01 321AV 01 322AV 01 323AV 01 324AV 01 325

B085/45B105/45B105/60B155/60B205/45

M8M10M10M14M18

15 to 4525 to 7550 to 16090 to 300150 to 500

7.069.189.18

19.3036.65



nd


Flat withoutthreaded bars

S 40

A 45/B

ANTI-1

B085/45

A 28/20

A 35

A 35b (grey)

A 40E

BT-60

AV RUBBER PADSCode Item Load Kg €

PLATE OF RUBBER/CORK/RUBBER (22 mm.)

AV 01 231AV 01 232AV 01 233AV 01 234AV 01 237

50 x 50 x 2275 x 75 x 22100 x 100 x 22150 x 150 x 22457 x 457 x 22

75175315700

6000

1.262.183.427.30

68.00RUBBER PLATES FOR CUTTING

AV 01 201AV 01 203AV 01 204AV 01 205AV 01 206AV 01 207

300 x 300 x 8400 x 400 x 1250 x 50 x 1275 x 75 x 12100 x 100 x 12150 x 150 x 12

10002000

3170

125280

8.4913.930.791.161.474.15

ANTIVIBRATION RUBBERCode. Item Load Kg €

ANTIVIBRATION RUBBER

AV 01 213AV 01 214AV 01 215AV 01 216AV 01 218

50 x 50 x 1550 x 50 x 2080 x 80 x 2580 x 80 x 35100 x 100 x 60

70 to 150100 to 250250 to 500300 to 600

1.000 to 2.700

1.321.652.463.126.12

ANTIVIBRATION FOR FAN

AV 01 099AV 01 100

Ø 5 mm stepØ 8 mm step

0.290.48

CEILING RUBBER SUPPORTSCode Item Box

content Load Kg €

SUSPENSION BY SLIDE«TVA»

AV 01 016AV 01 017AV 01 015

TVA 40TVA 60TVA 75

8 to 2518 to 5025 to 75

3.103.263.42

SUSPENSION VERTICAL ADJUSTMENT

AV 01 019

• It allows to regulate 25 mm• Thread M10RDAS - 60 20 to 60 8.10

ANTIVIBRATOR FOR CHANNEL RAIL

AV 01 041AV 01 042

• With internal metal washerAntivibrator M8Antivibrator M10

5555

0.680.74

SUSPENSION VERTICAL ADJUSTMENT

• With rubber antivibrator and washer

AV 01 045

AV 01 046

AV 01 047

Support type LBag 100 support type L

Support type ZBag 100 support type L

Support type "BRA"Bag 100 support type L

100

100

100

0.800.63/pc

0.950.77/pc

0.900.80/pc



nd


TVA

TacoØ27

RDAS

BRA-

BRA-L

BRA-Z

AV METAL ANTIVIBRATORS AND SHOCK ABSORBERSCode Item Load Kgr. €

GROUND FIXING

AV 02 002AV 02 003AV 02 004AV 02 005AV 02 006AV 02 007AV 02 008

M - 25M - 50M - 75M - 100M - 150M - 250M - 350

10 to 2520 to 5030 to 75

45 to 11060 to 150

120 to 250150 to 350

5.385.696.306.83

16.9721.1522.41

BED FIXING

AV 02 021AV 02 022AV 02 023AV 02 024AV 02 025AV 02 026AV 02 027

M - 25 - MM - 50 - MM - 75 - MM -100 - MM -150 - MM -250 - MM -350 - M

10 to 2520 to 5030 to 75

45 to 11060 to 150

120 to 250150 to 350

7.327.488.368.91

18.3922.6328.69

DOUBLE BED

AV 02 031AV 02 032AV 02 033AV 02 034AV 02 035AV 02 036AV 02 037

AM - 25 - RAM - 50 - RAM - 75 - RAM -100- RAM -150- RAM -250- RAM -350- R

10 to 2520 to 5030 to 75

45 to 11060 to 150

120 to 250150 to 350

8.889.74

10.2711.8419.8826.2631.10

DOUBLE BEDMORE THAN ONE SPRING

AV 02 041AV 02 043AV 02 044

2M -3002M -5002M -700

150 to 300250 to 500300 to 700

44.9046.3255.37

AV 02 051AV 02 052AV 02 053

3M -4503M -7503M -1050

200 to 450300 to 750

400 to 1050

65.9971.4076.86

AV 02 055AV 02 056

4M -10004M -1400

450 to 1000600 to 1400

85.4289.46

AV 02 061AV 02 062

6M -15006M -2100

700 to 1500900 to 2100

113.72132.72

CEILING FIXING

AV 02 102AV 02 103AV 02 104AV 02 105AV 02 106AV 02 107AV 02 108

TM - 25TM - 50TM - 75TM -100TM -150TM -250TM -350

10 to 2520 to 5030 to 75

45 to 10060 to 150

120 to 250150 to 350

8.158.85

10.2010.3726.8135.9337.57

SUPPORT/MACHINE FIXED INTHREADED BAR

AV 02 110AV 02 111AV 02 112AV 02 113AV 02 114

RM - 10RM - 20RM - 30RM - 40RM - 50

2 to 107 to 209 to 30

12 to 4050

4.154.254.364.464.52

CEILING FIXED IN THREADED BAR

AV 02 121AV 02 122AV 02 123AV 02 124

TV 10TV 20TV 30TV 40

2 to 109 to 30

12 to 4018 to 50

7.777.887.988.09



nd


THREADEDBAR —8

THREADEDBAR —8RM TV

GF REFRIGERANT GASES FOR SPLITSCode Item €/Kg

(replacement for R-12 - with oil change)

GF 01 052GF 01 058GF 01 057GF 01 055

Bottle of 6 KgBottle of 12 KgBottle of 25 KgBottle of 60 Kg

Check webfor updated

prices

(Refrigeration)

GF 01 068GF 01 067GF 01 066GF 01 065

Bottle of 6 Kg (4 Kg gas)Bottle of 12 Kg (9 Kg gas)Bottle of 25 Kg (20 Kg gas)Bottle of 60 Kg (45 Kg gas)


prices

(Air Conditioner)

GF 01 132GF 01 133GF 01 134GF 01 135



prices

(Air Conditioner)

GF 01 152GF 01 153GF 01 154GF 01 155



prices

(Refrigeration)

GF 01 162GF 01 163GF 01 164GF 01 165



prices

( replacement of R-12 and R-409A)

GF 01 041GF 01 042GF 01 044

Bottle of 6 KgBottle of 12 KgBottle of 60 Kg


prices

• Containers and accessories

Code Item €

GF 02 010/007GF 02 009/006GF 02 012/008GF 02 001/005

Bottle of 6 Kgrs.Bottle of 12 Kgrs.Bottle of 25 Kgrs.Bottle of 60/65 Kgrs.

65.0075.00

145.00170.00

GF 02 016GF 02 017

• Double safety valveBottle of 25 Kgrs.Bottle of 60/65 Kgrs.

205.00240.00

GF 02 119GF 02 120HF 06 127

Reducer female 5/8" to 1/4 male with jointReducer female 5/8" to 5/16 male with jointReducer female 1/4" to 5/16 male with joint

3.004.203.50

• Refillable bottle 2 kg

Code Item €

GF 02 021 Bottle of 2.5 litres. Carrying capacity: 2 kg. Safety val-ve. Charge for valve core of 1/4". 46.50

GF 01 139GF 01 159GF 01 059GF 01 069GF 01 186

Gas R407CGas R410AGas R134aGas R404AGas R427A


prices



nd


IMPORTANT

The 60kg bottles will not becharged for a maximum period of3 months. If they are not returnedafter this period, they will be invoi-

ced.

IMPORTANT: Bottles of 2.5kg arenot refunded, but exchanged

by refilled ones

GF 02 119

Pressure33 and 47 bar

GREEN colour

HF 06 127

CONVERSION OF MODEL R-22

GF REFRIGERANT GASESCode Item €

GAS R-427A

GF 01 182GF 01 183GF 01 184GF 01 185

• ALL applications (see table on page B-3)• Air conditioning• RefrigerationBottle 6 kg (6 kg gas)Bottle 12 kg (12 kg gas)Bottle 25 kg (25 kg gas)Bottle 60 kg (60 kg gas)

Checkwebsite for

updatedprices

GAS R-417A

GF 01 071GF 01 072GF 01 073GF 01 074

• Application: "HIGH TEMPERATURE"• Air conditioningBottle 6 kg (5 kg gas)Bottle 12 kg (10 kg gas)Bottle 25 kg (22 kg gas)Bottle 60 kg (55 kg gas)

Checkwebsite for

updatedprices

GAS R-422D

GF 01 172GF 01 173GF 01 174GF 01 175

• Application: "MEDIA-BAJA TEMPERATURA"• Air cooled water chiller• Air conditioningBottle 6 kg (5 kg gas)Bottle 12 kg (10 kg gas)Bottle 25 kg (20 kg gas)Bottle 60 kg (55 kg gas)

Checkwebsite for

updatedprices

GAS R-22 "REFORMED"

GF 01 192GF 01 193GF 01 196GF 01 195

Bottle 6 kg (6 kg gas)Bottle 12 kg (12 kg gas)Bottle 12 kg (12 kg gas)Bottle 60 kg (60 kg gas)

Checkwebsite for

updatedprices

SLIDE RULE

HF 06 161 Slide rule for determining the equivalence betweenpressure and gas temperature 8.00



nd


DIRECTreplacement

R-22

ReplacementR-22

• Air conditionersand cooling machines

Refrigerant gas Comments

EXPANSION SYSTEM WITH CAPILLARY TUBES

R427A(*) 10% capacity lossR422D Use not recommendedR417A 20% capacity loss

R427A(*) 10% capacity loss, need to adjust valveR422D 10% capacity loss, need to adjust valveR417A Use not recommended

(*) R-427A is the recommended gas and requires the smallestamount of adjustments

For more details, check our website:www.salvadorescoda.com

• Machines for retailor industrial refrigeration

Refrigerant gas Comments

EXPANSION SYSTEM WITH CAPILLARY TUBES

R427A(*) 15% capacity lossR417A 20% capacity lossR422D Use not recommendedR404A 5% capacity loss,reduces capillary tube by

20%

R427A(*) 10% capacity loss, need to adjust valveR417A Use not recommendedR422D 15% capacity loss, need to adjust valve and

change holeR404A 5% capacity loss, replace entire expansion

valve

(*) R-427A is the recommended gas and requires the smallestamount of adjustments

ReplacementR-22

REGULATION ON TRADE AND HANDLING OF FLUORINATED GASES RD 795/10. In accordance with letter a) of subparagraph 2 of Article 9 of the RoyalDecree 795/2010, of 16 June, which regulates the trade and handling of fluorinated gases and equipment containing them, as well as the certification of professionals usingthem, the distributors of fluorinated gases will make sure that, in case the gas target use is as a refrigerant, they shall only hand them over or sell them to qualified companiesor manufacturers specialised in those fluids. Qualified companies are those companies authorised to work with refrigeration systems according to the Regulation on the secu-rity of refrigerant installations approved in the Royal Decree 3099/1977, of 8 September, or according to the Regulation on thermal istallations in buildings approved in the Ro-yal Decree 1027/2007, of 20 July, according to letter k) of Article 2 of the Royal Decree 795/2010, of 16 June. Every customer must provide their official certificate as

GF REFRIGERANT GAS IN REFILLABLE BOTTLE• Refillable bottle 1 kg

Code Item €

BOTTLE

GF 02 031GF 02 032GF 02 033

Bottle 1 kg. with valve 1/4"Bottle 1 kg. with valve 5/16" for R410AEnvase de 0,9 Kg. R22 regenerated

6.006.006.00

GAS REFILL

GF 01 201GF 01 202GF 01 203GF 01 204GF 01 191

Gas 1 kg R134aGas 1 kg R407CGas 1 kg R404AGas 1 kg R410AGas 0,9 Kg R22 regenerated

45.0045.0045.0045.0098.00

REFRIGERANT GAS IN DISPOSABLE BOTTLECode Item €

HYDROCARBON GASES “HC”

GF 01 119GF 01 121

Bottle 420 gr of R-600aBottle 370 gr of R-290

20.0032.00

SHUT-OFF VALVES FOR BOTTLESCode Item €

VALVES 1/4M - 1/4 H SAE

GF 02 105GF 02 100

Straight ball/coupling valveAngle shut-off valve

13.5015.65

VALVES 1/4M - 5/16 H SAE

GF 02 106GF 02 111

Straight ball/coupling valveAngle shut-off valve

13.5015.65

OILS FOR REFRIGERATION SYSTEMSCode Item Bottle €

POLYOL-ESTER OILS «SUNISO»

GF 03 204GF 03 201 SL68

Valid for new gases:R427A, R422D, R417A,R404A, R407C, R507A,

R410A, R134Aand all HFCs

1litre4 litres

20.3578.30

GF 03 203GF 03 200 SL32 1litre

4 litres20.3578.30

GF 03 205GF 03 202 SL100 1litre

4 litres20.3578.30

GF 03 207GF 03 208 SL22 1litre

4 litres20.3578.30

MINERAL OILS «SUNISO»

GF 03 011GF 03 021GF 03 013

3GSValid: R-22. R12

and all HFCs

4 litres5 litres20 litres

34.0039.50

165.20GF 03 012GF 03 022GF 03 014

4GS4 litres5 litres20 litres

34.0039.50

165.20

OILS FOR REFRIGERATION SYSTEMSCode Item €

REPSOL ICE OIL

GF 03 103GF 03 105GF 03 107GF 03 109

5 litre can with mineral 3 GS5 litre can with 4 mineral GS5 litre can with synthetic S-325 litre can with synthetic S-68

37.2037.20

101.30101.30



nd


Bottles of 1 kg cannot be refundedbut exchanged by refilled ones

3GS

SL32

CF SPARE PARTS ACCESSORIESFOR AIR CONDITIONING

• Speed control in terms of PRESSURE

Code Model GAS Bar Amp. €

CF 04 505CF 04 503CF 04 508CF 04 502CF 04 511CF 04 512CF 04 513CF 04 514CF 04 531CF 04 532CF 04 533

P215 LR 9110P215 SH 9100P215 ST 9100P215 DP 9600P215 LR 9611P215 SH 9101P215 ST 9101P215 DP 9601P215 SH 9102P215 ST 9102P215 DP 9102

R-22/404A/407CR-22/404A/407CR-22/404A/407CR-22/404A/407C

R134aR134aR134aR134aR410AR410AR410A

14 - 2414 - 2414 - 2414 - 248-148-148-148-14

22 - 4222 - 4222 - 42

34683468468

185.54208.87297.05358.74230.23274.16386.25538.82219.41302.13358.74

• Direct assembly 1/4" SAE femaleCF 04 541 P215 PR 9200 R-407C, R-404A, R-134a 10 - 25 3 128.21CF 04 542 P215 PR 9202 R-410A 22 - 42 3 128.21

CF 04 522CF 04 521CF 04 536CF 04 520

P255 MM 9100P255 MM 9601P255 MM 9503P255 MM 9600

R-22R-134aR-410A

R404A/R407C

14 - 248 o 1422 - 4214-24

5555

973.56989.30990.22973.56

Note: models P215 and P255 include anti-interferencesfilter according to the standard 89/336/EEC

CF 04 523CF 04 524

P35 AC 9100 (Pressure transducer for P15 and P215)P35 AC 9106 (Pressure transducer for P255)

269.14258.71

• Speed control in terms of TEMPERATURE

Code Model Scale °C €

SINGLE-PHASE FAN

• Fan of 1000W (7 Amp.)• DIN mounting• Octal base• Dimensions: 45 x 92 x 80 mm• Power supply: 220V

CO 32 201CO 32 202

CO 32 203CO 32 204CO 35 001

CO 32 205

For condenser unitsFASEC 33 2.5AFASEC 337 7.5AFor evaporatorsFASEC 43 2.5AFASEC 437 7APTC temperature sensor Ø6x30.1.5 m cableOctal base 500 W

0 to 60°C0 to 60°C

0 to 60°C0 to 60°C

-20 to 80°C

83.6099.64

83.6099.64

7.776.00

• Miniature pressure controls

Code Model Range (bar)€Open Close

• AUTOMATIC reset• Thread 1/4" female

CF 04 153CF 04 155CF 04 156CF 04 162CF 04 157

P100 AA-3D (1)P100 AA-5D (2)P100 AA-6D (2)P100 CA-1D (1)P100 CP-108 D (R-410A)

10.30.72.427.538

15.52.84.120.628

20.2820.2820.2823.3826.26

• MANUAL resetCF 04 169CF 04 165CF 04 166

P100 DA-1D (1)P100 DA-72D (R-410A)P100 DA-75D (R-410A)

27.53842

Manual resetManual resetManual reset

36.4039.6739.67



nd


OCTAL BASE

(1) Cable length 1.22 mts.(2) Connection through fast-on terminals

CF FOUR-WAY VALVE FOR R-22• RANCO

CodeModel Capacity kW Connections

Fig. €without coilPresent Coil

serie R404A R407 R410 Aspira-tion

Compres-sion

CF 03 900CF 03 901CF 03 902CF 03 903CF 03 904CF 03 911CF 03 916CF 03 912CF 03 913CF 03 914CF 03 915

V14-08050-100V24-08060-200V24-10060-300V34-12080-800V64-12080-100V64-14080-100V64-14100-100V64-14120-100V103-1814-020V123-220T-025VH2J0311000

LDKLDKLDKLDKLDKLDKLDKLDKL30L30LB

4,99,19,1

11,420,120,120,120,135,244,7

111,6

4,96,67,3

10,519,919,919,919,935,245,1145

67,78,8

12,323,623,623,623,641,252,8164

1/2"1/2"5/8"3/4"3/4"7/8"7/8"7/8"

1-1/8"1-3/8"1-3/4"

5/16"3/8"3/8"1/2"1/2"1/2"5/8"3/4"7/8"

1-1/8"1-1/2"

21122222222

51.3050.7046.9062.4096.00

129.73130.05138.00231.00289.00

1,275.00

VALVE COILS

CF 03 993CF 03 994CF 03 995CF 03 997CF 03 996

• Cable Length: 1.200 mmCoil L30-42480-100* 230V 50-60HzCoil L30-12480-100* 24V 50-60HzCoil LB-604012B00 230V 50-60HzCoil LDK 414801000 230V 50-60HzCoil LDK 114801000 24V 50-60Hz

16.5019.0021.0019.5521.95

• JOHNSON - SANHUA

Code Model CapacityKcal/h

Connections€Suction Compression

• Coil includedCF 04 181CF 04 182CF 04 186CF 04 187CF 04 183CF 04 185CF 04 188CF 04 189CF 04 190

SHF4-23SHF7-34SHF9-35SHF11-45SHF20-46SHF20-47STF-04U9STF-0712DHF-45

3.8706.5367.7409.460

17.20017.20023.25039.53047.000

3/8"1/2"5/8"5/8"3/4"3/4"7/8"7/8"

1-1/8"

5/16"3/8"3/8"1/2"1/2"1/2"1/2"5/8"7/8"

32.5037.5037.9446.2070.4577.4687.30

110.00195.00

CF 04 184 Coil SHF at 220V 50/60Hz (Spare Part) 12.00

MUFFLERSCode Model Connection €

VF 04 101VF 04 102VF 04 103VF 04 104VF 04 105VF 04 106VF 04 107

CM-2203CM-2204CM-2205CM-2307CM-2311CM-2413CM-2415

3/8"1/2"5/8"7/8"

1-1/8"1-3/8"1-5/8"

13.4013.9014.7036.3040.6042.5044.80

SOLDERING BALL VALVE - ODSCode Model Connection €

VF 01 630VF 01 631VF 01 632VF 01 633VF 01 634VF 01 635VF 01 636VF 01 637VF 01 638VF 01 639VF 01 640

VBE6VBE10VBE12VBE16VBE18VBE22VBE28VBE35VBE42VBE54VBE76


1-1/8" ODS1-3/8" ODS1-5/8" ODS2-1/8" ODS2-5/8" ODS

16.6516.6516.6522.5022.5030.7543.0062.3090.00

140.00182.00

VF 01 690VF 01 691VF 01 692VF 01 693VF 01 694VF 01 695VF 01 696VF 01 697VF 01 698VF 01 699VF 01 688VF 01 689

VBOE6VBOE10VBOE12VBOE16VBOE18VBOE22VBOE28VBOE35VBOE42VBOE54VBOE64VBOE76


1-1/8" ODS1-3/8" ODS1-5/8" ODS2-1/8" ODS2-5/8" ODS3-1/8" ODS

20.6020.6022.5025.6034.0036.6043.2065.0093.60

138.90195.00408.50



nd


TABLE OF EQUIVALENCE:

SANHUAJOHNSON RANCO SAGINOMIYA Capacity

kW

SHF4 V1-306 CHV-0101 4.5SHF7 V2-310 CHV-0201 7SHF9 V2-310 No existe 9

SHF11 V3-310 CHV-0301 11SHF20-46 V4-312 CHV-0401 20

TABLE OF EQUIVALENCE:

Current Old

V24-08060-200V24-10060-300V34-12080-800V64-12080-100V64-14080-100V64-14100-100V64-14120-100

V23-08060-200V23-10060-300V33-12080-800V63-12080-100V63-14080-100V63-14100-100V63-14120-100

WITHOUTVALVECORE

VALVECORE 1/4"

• Max. pressure: 45 bar

Fig. 2Fig. 1

VF MOLECULAR FILTER DRIER• OEM Series

Code Model Connec-tion

Volumecm3

Capacity (Kw)€R404A R410A R134A

VF 03 011VF 03 012VF 03 013

FD 032FD 052FD 082

1/4"1/4"1/4"

5065100

7,27,27,2

10,810,810,8

101010

7.408.00

10.50VF 03 015VF 03 016VF 03 017

FD 053FD 083FD 163

3/8"3/8"3/8"

65100250

17,817,817,8

26,526,526,5

24,624,624,6

8.009.70

12.30VF 03 018 FD-164 1/2" 250 26,9 40,2 37,3 13.10VF 03 019 FD-305 5/8" 480 39 58 54 20.00

VF 03 021VF 03 022VF 03 023

FD 032SFD 052SFD 082S

1/4"1/4"1/4"

5065100

7,27,27,2

10,810,810,8

101010

7.408.00

10.50VF 03 025VF 03 026VF 03 027

FD 053SFD 083SFD 163S

3/8"3/8"3/8"

65100250

17,817,817,8

26,526,526,5

24,624,624,6

8.009.70

12.30VF 03 028 FD-164S 1/2" 250 26,9 40,2 37,3 13.10VF 03 029VF 03 030

FD-165SFD-305S

5/8"5/8"

250480

3839

5558

5254

14.5020.00

VF 03 031 FD-307S 7/8" 480 50 74 69 26.50VF 03 032 FD-419S 1-1/8" 705 79 118 110 53.00

Max. working pressure: 35 bar

MOLECULAR FILTER DRIER• Filter driers R22, R134a, R407c and R404a

Code ModelCon-nec-tion

Volu-mecm3

Capacity (kW)€R-22 R134a R404AR407CR410A

VF 03 601VF 03 602VF 03 603VF 03 604

WEU 032WEU 052WEU 082WEU 162

1/4"5080130250

10,810,810,810,8

10,010,010,010,0

7,27,27,27,2

10,310,310,310,3

10,810,810,810,8

10.9013.5016.6020.40

VF 03 605VF 03 606VF 03 607

WEU 053WEU 083WEU 163

3/8"80130250

25,826,526,5

23,924,624,6

17,317,817,8

24,525,225,2

25,826,526,5

13.5016.6020.40

VF 03 608VF 03 609VF 03 610

WEU 084WEU 164WEU 304

1/2"130250480

40,240,242,7

37,337,339,6

28,638,238,240,6

40,240,242,7

16.6020.4035.60

VF 03 611VF 03 612

WEU 165WEU 305 5/8" 250

48055,658,1

51,553,9

37,338,9

52,855,2

55,658,1

20.4035.60

VF 03 621VF 03 622VF 03 623VF 03 624

WEU 032 SWEU 052 SWEU 082 SWEU 162 S

1/4"5080130250

10,810,810,810,8

10,010,010,010,0

7,27,27,27,2

10,310,310,310,3

10,810,810,810,8

10.9013.5016.6020.40

VF 03 625VF 03 626VF 03 627

WEU 053 SWEU 083 SWEU 163 S

3/8"80130250

25,826,526,5

23,924,624,6

17,317,817,8

24,525,225,2

25,826,526,5

13.5016.6020.40

VF 03 628VF 03 629VF 03 630

WEU 084 SWEU 164 SWEU 304 S

1/2"130250480

40,240,242,7

37,337,339,6

26,926,928,6

38,238,240,6

40,240,242,7

16.6020.4035.60

VF 03 631VF 03 632

WEU 165 SWEU 305 S 5/8" 250

48055,658,1

51,553,9

37,338,9

52,855,2

55,658,1

20.4035.60

VF 03 635 WEU 307 S 7/8" 480 74,1 68,7 49,6 70,4 74,1 40.80VF 03 633 WEU 756 S 3/4" 1200 69,4 64,3 46,5 65,9 69,4 97.10VF 03 637 WEU 757 S 7/8" 1200 118,4 109,8 79,3 112,5 118,4 97.10VF 03 639 WEU 759 S 1-1/8" 1200 172,2 159,6 115,4 163,6 172,2 97.10




nd


®

VF BI-FLOW FILTER DRIER FOR HEAT PUMPS• Serie FB

Code Model Connection €

VF 03 401VF 03 402VF 03 403VF 03 404

FB - 052FB - 163FB - 164FB - 305

1/4"3/8"1/2"5/8"

22.0024.0028.0032.00

VF 03 410VF 03 411VF 03 412VF 03 413VF 03 414VF 03 415VF 03 416VF 03 417VF 03 418

FB - 052SFB - 083SFB - 163SFB - 084SFB - 164SFB - 165SFB - 305SFB - 307SFB - 309S

1/4"3/8"3/8"1/2"1/2"5/8"5/8"7/8"

1-1/8"

22.0024.0028.0032.0034.0034.0038.0040.0043.00

• Serie V2A

Code ModelCon-nec-tion

Capacity (kW)€R-22 R134a R404a R407C R410A

VF 03 651VF 03 652VF 03 653VF 03 654VF 03 655

V2A-083V2A-084V2A-163V2A-164V2A-165

3/8"1/2"3/8"1/2"5/8"

26,540,226,540,255,6

24,637,324,637,351,5

17,826,917,826,937,3

25,238,225,238,252,8

26,540,226,540,252,8

46.4047.8050.4053.0055.10

VF 03 661VF 03 662VF 03 663VF 03 664VF 03 665

V2A-083SV2A-084SV2A-163SV2A-164SV2A-165S

3/8"1/2"3/8"1/2"5/8"

26,540,226,540,255,6

24,637,324,637,351,5

17,826,917,826,937,3

25,238,225,238,252,8

26,540,226,540,252,8

46.4047.8050.4053.0055.10


• Serie DCB

Code Type Junctioninches

Volumecm3

Danfoss Code€Threaded Welded

VF 03 151 DCB-162 1/4" 225 23Z1406 — 45.50

VF 03 152DCB-163/S 3/8" 225

23Z1405 —45.50

VF 03 153 — 23Z1467

VF 03 154DCB-164/S 1/2" 225

23Z1404 —45.50

VF 03 155 — 23Z1466

VF 03 156DCB-165/S 5/8" 225

23Z1403 —45.50

VF 03 157 — 23Z1465

VF 03 158 DCB-303 3/8" 480 23Z1409 — 52.50

VF 03 159DCB-304/S 1/2" 480

23Z1408 — 52.50

VF 03 160 — 23Z1470 52.50

VF 03 161DCB-305/S 5/8" 480

23Z1407 —52.50

VF 03 162 — 23Z1469

Max. working pressure: 42 bar *Valid for all refrigerants



nd


®

VF FILTER DRIERS• Filter driers with acid prevention and

solid core for R22, R134A, R404A, R410A . . .

Code Type Junctioninches

Volumecm3

Danfoss Code€Threaded Welded

VF 03 211DCL-032/S 1/4" 50

023Z5000 — 10.60VF 03 212 — 023Z4501 10.60VF 03 219

DCL-033/S 3/8" 50023Z5001 — 10.60

VF 03 220 — 023Z4504 10.60VF 03 213

DCL-052/S 1/4" 65023Z5002 — 12.60

VF 03 214 — 023Z4506 12.60VF 03 221

DCL-053/S 3/8" 65023Z5003 — 12.60

VF 03 222 — 023Z4509 12.60VF 03 215

DCL-082/S 1/4" 100023Z5004 — 15.40

VF 03 216 — 023Z4511 15.40VF 03 223

DCL-083/S 3/8" 100023Z5005 — 15.40

VF 03 224 — 023Z4514 15.40VF 03 229

DCL-084/S 1/2" 100023Z5006 — 15.40

VF 03 230 — 023Z4516 15.40VF 03 217

DCL-162/S 1/4" 225023Z5007 — 21.10

VF 03 218 — 023Z4518 21.10VF 03 225

DCL-163/S 3/8" 225023Z5008 — 21.10

VF 03 226 — 023Z4521 21.10VF 03 231

DCL-164/S 1/2" 225023Z5009 — 21.10

VF 03 232 — 023Z4523 21.10VF 03 235

DCL-165/S 5/8" 225023Z5010 — 21.10

VF 03 236 — 023Z4524 21.10VF 03 227

DCL-303/S 3/8" 480023Z0012 — 35.90

VF 03 228 — 023Z4528 35.90VF 03 233

DCL-304/S 1/2" 480023Z0013 — 37.80

VF 03 234 — 023Z4530 37.80VF 03 237

DCL-305/S 5/8" 480023Z0014 — 37.80

VF 03 238 — 023Z4531 37.80

VF 03 242 DCL-307/S 7/8" 480 — 023Z4534 37.80

VF 03 239DCL-415/S 5/8" 705

023Z0103 — 58.50VF 03 240 — 023Z4539 58.50

VF 03 244 DCL-417/S 7/8" 705 — 023Z4540 58.50

Mixture of molecule Sieves and Actived Alumina.Max. working pressure: 42 bar

COPPER FILTERS FOR SMALL SYSTEMSCode Model Connection

Loadkg

Sizemm €

COPPER FILTERS «R-12 / R-22 / R-134a / R-404a»

VF 03 041VF 03 040VF 03 042VF 03 047VF 03 043VF 03 044VF 03 045VF 03 046

SM 2/10-XSM 2/15-XSM 2/20-XSM 2/20-XSM 2/30-XSM 2/30-XSM 2/40-XSM 2/40-X

3/16"-Capillary tube3/16"-Capillary tube1/4"-Capillary tube3/16"-Capillary tube

1/4"-1/4"1/4"-Capillary tube

1/4"-1/4"1/4"-Capillary tube

1015202030304040

16 x 12019 x 14019 x 15519 x 15524 x 15524 x 15524 x 17024 x 170

1.421.781.911.912.802.803.093.09



nd


DCL SeriesMixture of molecule Sieves andActived Alumina.• Used in solid core DCL.• Recommended for use with mineral

oils and alquilbencenics andcompatible with HCFC, CFC andHFC refrigerants.

• Elimination of humidity and acidsbefore these elements enter therefrigeration system

A Solid DCL coreB Flared or

welded joints

C Drilled surfaceD Polyester filter.E Elastic part

EA

DC

B

MF ROTARY HERMETIC COMPRESSORFOR AIR-CONDITIONER

• R22

Code Model CapacitorF BTU Output

(Kcal/h) €

SINGLE-PHASE MOTOR220 V 50Hz

MF 15 221MF 15 222MF 15 223MF 15 224MF 15 201MF 15 202MF 15 225MF 15 203MF 15 204MF 15 205MF 15 206MF 15 231MF 15 232MF 15 207MF 15 208MF 15 209MF 15 210

RH 135 VHATRH 145 VHATRH 165 VHATRH 174 VHATRH 207 VHATRH 231 VHATRH 247 VHATRH 277 VHATPH 31 VNETPH 33 VPETPH 39 VPETNH 36 VLDTNH 38 VMDTNH 41 VNDTNH 47 VNDTNH 52 VNDTNH 56 VNDT

2525252530303540455060505045506060

7,7778,3729,60310,11812,22113,69014,60016,46718,33320,04023,05020,43521,98324,60228,57031,98234,839

1,9602,1102,4202,5503,0803,4503,6104,1504,6205,0505,8105,1505,5406,2007,2008,0628,780

244.00248.00251.00254.00266.00298.00308.00315.00400.00433.00457.00485.00488.00490.00509.00530.00541.00

THREE-PHASE MOTOR380 V 50Hz

MF 15 211MF 15 212MF 15 213MF 15 214

NH 41 YDPTNH 47 YDETNH 52 YDETNH 56 YDET

24,80028,57032,22035,117

6,2507,2008,1208,850

544.00556.00565.00597.00

• R407C


(Kcal/h) €

SINGLE-PHASE MOTOR220/240 V 50Hz

MF 15 251MF 15 252MF 15 253MF 15 254MF 15 255MF 15 256MF 15 257MF 15 258MF 15 259MF 15 260MF 15 261

RE 135VHSMTRE 145 VHSMTRE 165 VHSMTRE 174 VHSMTRE 207 VHSMTRE 231 VHSMTRE 277 VHSMTPE 31 VNEMTPE 33 VPEMTPE 36 VPEMTPE 39 VPEMT

2525252530304045505560

7,6428,2579,4529,96412,01113,44416,03918,05019,72521,26022,693

1,9102,0652,3652,4903,0003,3604,0004,5104,9305,3155,675

292.00297.00302.00304.00313.00349.00371.00469.00504.00525.00535.00

THREE-PHASE MOTOR380/415 V 50Hz

MF 15 271MF 15 272MF 15 273MF 15 274

NE 41 YDNMTNE 47 YDNMTNE 52 YDNMTNE 56 YDNMT

––––

24,39928,49432,35134,807

6,1007,1258,0888,700

633.00646.00657.00676.00

* R410 A, next models forthcoming



nd


MITSUBISHIELECTRIC

LICENSED BY


STARTER CONDENSERS FOR COMPRESSORSCode Model Dimensions Voltage (V) €

VE 01 961VE 01 962VE 01 963VE 01 964VE 01 965VE 01 966VE 01 967VE 01 968VE 01 970VE 01 971VE 01 972VE 01 973VE 01 974VE 01 975VE 01 977VE 01 978VE 01 979VE 01 980VE 01 981VE 01 982VE 01 986VE 01 983VE 01 987VE 01 988VE 01 989VE 01 990VE 01 991VE 01 992

1,5 MF2 MF2,5 MF3 MF4 MF5 MF6 MF8 MF10 MF12 MF14 MF16 MF18 MF20 MF25 MF30 MF35 MF40 MF45 MF50 MF55 MF60 MF65 MF70 MF75 MF80 MF90 MF100 MF

28 x 5528 x 5528 x 5528 x 5528 x 5528 x 5532 x 5532 x 5536 x 5536 x 7036 x 7040 x 7040 x 7040 x 7040 x 9340 x 9345 x 9345 x 9345 x 11945 x 11950 x 11950 x 11955 x 11855 x 11860 x 11860 x 11865 x 11865 x 118

450450450450450450450450450450450450450450450450450450450450450450450450450450450450

5.505.505.505.505.856.156.608.008.85

10.0010.5011.6012.3513.6015.4016.6519.6021.4024.6526.1027.6028.6530.8532.1533.9035.0039.4542.00



nd


FEATURES

• Rotary airtight compressor.• Applications: window type,

split type, cooling and hea-ting air-conditioner

• Refrigerant: R-22.• Evaporation temperature:

-10°C to 15°C.• Condensation temperature:

28°C to 65°C.• Compression ratio

RH series: 6 max.PH and NH series: 8 max.

• Outdoor ambient temp.:Air conditioning 20°C to 43°CHeat pump -10°C to 43°C

Series RH PH NH135VHAT

145VHAT

165VHAT

174VHAT

207VHAT

231VHAT

277VHAT

31VNET

33VPET

39VPET

41VNDT

41YDPT

47VNDT

47YDET

52VNDT

52YDET

56YDET

Displacement cm3 13.5 14.5 16.5 17.3 20.7 23.1 27.7 31 33 39.1 41.8 41.8 47 47 52 52 56.9Capacity Kcal/h 1,960 2,110 2,420 2,550 3,080 3,450 4,150 4,620 5,050 5,810 6,200 6,200 7,200 7,200 8,060 8,060 8,850

Watt 2,279 2,454 2,812 2,966 3,582 4,012 4,826 5,373 5,873 6,757 7,211 7,211 8,374 8,374 8,780 8,780 10,293BTU/h 7,778 8,373 9,603 10,116 12,222 13,691 16,469 18,334 20,040 23,056 24,604 24,604 28,572 28,572 31,985 32,223 35,120

Power cons. Watt 750 810 910 960 1,160 1,300 1,560 1,730 1,900 2,210 2,420 2,420 2,930 2,930 3,550 3,550 3,620Weight Kg. 13.2 13.2 13.2 13.2 14.6 14.6 15.1 22.2 22.8 22.8 28.6 28.6 29.6 29.6 30.6 30.6 30.8Voltage 50Hz V 220/240 II 220/240II 220/240 II 380V III 220/240 II 380V III 220/240 II 380V III 380V IIIDimensions A mm 211.3 211.3 211.3 211.4 246.2 246.2 256.2 291.3 316.3 316.3 341.3 326.3 341.3 341.3 341.3 341.3 341.3

B mm 240.8 240.8 240.8 251 260.5 260.5 260.5 293.9 308.9 308.9 392.3 317.3 392.3 392.3 392.3 392.3 392.3C mm 101 101 101 110.5 110.5 110.5 110.5 – – – – – – – – – –D mm 60.5 60.5 60.5 60.5 74 74 74 74 74 74 74 74 74 74 74 74 74E mm 9.6 9.6 9.6 9.6 12.7 12.7 12.7 16 16 16 16 16 16 16 19.1 19.1 19.1

Important: place the F indicated capacitor of 450V

RH PH NH

• Faston 6.35• Threaded outgoing M8

(VDE)

MITSUBISHIELECTRIC

LICENSED BY


• R-410A


(Kcal/h) €

SINGLE-PHASE MOTOR 220 V II 50Hz

MF 15 101 RN092VHSMT 20 7,643 1,926 264.00MF 15 103 RN099VHSMT 25 8,155 2,055 269.00MF 15 104 RN104VHSMT 25 8,564 2,159 273.00MF 15 107 RN125VHSMT 25 10,407 2,623 310.00MF 15 109 RN135VHSMT 30 11,225 2,829 318.00MF 15 111 RN145VHSMT 30 12,181 3,070 326.00MF 15 113 RN165VHSMT 30 13,887 3,500 335.00MF 15 115 RN196VHSMT 40 16,378 4,128 343.00MF 15 116 RN220VHSMT 40 18,700 4,713 355.00MF 15 118 NN23VBAMT 50 19,790 4,988 564.00MF 15 120 NN27VBAMT 55 22,929 5,779 582.00MF 15 121 NN29VAAMT 55 25,249 6,364 590.00MF 15 123 NN33VAAMT 55 28,968 7,301 607.00MF 15 124 NN37VAAMT 60 32,073 8,084 615.00MF 15 125 NN40VAAMT 60 34,802 8,772 623.00



nd


Technical features:

Model Input Nominal input Capacitor Weight Oil Dimensions (mm)Watts Amp. HP kW μF/VAC Kg CC. A B C D E

RN092VHSMT 770 3.6 0.80 0.60 20/370 13.6 300 213.1 243.8 101.0 60.5 9.6RN099VHSMT 820 3.8 0.87 0.65 25/370 13.6 300 213.1 243.8 101.0 60.5 9.6RN104VHSMT 865 4.0 0.94 0.70 25/370 13.6 300 213.1 243.8 101.0 60.5 9.6RN125VHSMT 1,050 4.9 1.07 0.80 25/370 13.6 300 213.1 243.8 101.0 60.5 9.6RN135VHSMT 1,120 5.2 1.21 0.90 30/370 15.7 520 257.5 260.5 110.5 74.0 12.7RN145VHSMT 1,220 5.8 1.34 1.00 30/370 15.7 520 257.5 260.5 110.5 74.0 12.7RN165VHSMT 1,410 6.6 1.47 1.10 30/400 15.7 520 257.5 260.5 110.5 74.0 12.7RN196VHSMT 1,680 7.9 1.74 1.30 40/370 15.7 520 257.5 260.5 110.5 74.0 12.7NN23VBAMT 1,950 9.2 2.01 1.50 50/400 29.2 1,200 327.8 318.6 – 74.0 16.0NN27VBAMT 2,260 10.4 2.28 1.70 55/400 30.4 1,200 327.8 318.6 – 74.0 16.0NN29VAAMT 2,440 11.2 2.55 1.90 55/400 30.4 1,200 342.8 393.6 – 74.0 16.0NN33VAAMT 2,800 13.1 2.95 2.20 55/420 31.9 1,300 342.8 393.6 – 74.0 16.0NN37VAAMT 3,130 14.7 3.35 2.50 60/420 31.9 1,300 342.8 393.6 – 74.0 19.1NN40VAAMT 3,430 16.1 3.62 2.70 60/420 31.9 1,300 342.8 393.6 – 74.0 19.1

MITSUBISHIELECTRIC

LICENSED BY

MF SCROLL HERMETIC COMPRESSORFOR AIR-CONDITIONER

• For R-22

Code Model BTU/h Kcal/h W €

THREE-PHASE 380-415V/50-60 Hz

MF 15 141 AH-60 YBFT 38,180 9,620 11,190 1,178.00

MF 15 142 BH-67 YFAT 42,550 10,730 12,470 1,193.00

MF 15 143 BH-82 YFAT 52,230 13,420 15,600 1,380.00

MF 15 144 BH-96 YFAT 63,400 15,980 18,580 1,512.00

• For R-410ACode Model BTU/h Kcal/h W €

SINGLE-PHASE 220V/50 Hz

MF 15 146 AN-30-VBFMT 25,930 6,540 7,600 1,000.00

MF 15 147 AN-36-VBFMT 37,530 9,460 11.000 1,076.00

THREE-PHASE 380-415/460V - 50/60 Hz

MF 15 148 BN-52YFAMT 47,430 11,960 13,900 1,362.00

MF 15 149 BN-62YFAMT 56,640 14,280 16,600 1,476.00

MOTOR FOR INVERTER 3 PH. WITH CHANGING FREQ. (20-120 Hz)

MF 15 150 ANB-33F* 36,870 (73,730) 9,290 (18,580) 10,800 (21,600) 1,437.00

* The inverter models can be replaced only by the same model.



nd


DISCHARGE

DISCHARGE

SUCTION

SUCTION

PROTECTION

RUNNINGCAPACITOR

KLIXONMOTOR

SINGLE-PHASE THREE-PHASE

LINE

CONTROLCIRCUIT

CONTACTOR

Wiring Diagram

Possible equivalences between Scrollcompressors:

Model Copeland MitsubishiR22

ZR-40 TFD/TWD AH-60ZR-48 TFD/TWD BH-67ZR-61 TFD/TWD BH-82ZR-81 TFD/TWD BH-96

R410AZP-32 PFJ AN 30VZP-41 PFJ ANY-36V

ZP-54 TFD/TWD BN-52YZP-67 TFD/TWD BN-62Y

MITSUBISHIELECTRIC

LICENSED BY


• For R-22 HIGH AND MIDDLE TEMPERATURES

Code Model CapacitorF

Cylind.cm3

Capacity(W) €

SINGLE-PHASE230 V II 50Hz

MF 60 001MF 60 011MF 60 012MF 60 002MF 60 003MF 60 004MF 60 005MF 60 006MF 60 007MF 60 008MF 60 009

SD122CVSD134CVSD145CVSD156CVSL193SVSL222SVSL253SVSHY33MSHW33TSHV33YTHV33W

1717202535353550505060

12.213.414.515.619.322.225.330.735.741.748.8

2,0402,2602,4802,6503,2503,7404,2705,1655,9907,1008,350

190.00194.00195.00196.00260.00263.00276.00295.00308.00405.00497.00

• For R-407C HIGH AND MIDDLE TEMPERATURES


Cylind.cm3

Capacity(W) €


MF 60 101MF 60 102MF 60 110MF 60 104MF 60 111MF 60 106MF 60 107MF 60 108MF 60 112MF 60 109

CG433ECG633GCSL193CVCSL211CVCH933UCHY33M-UCHW33TCHV33YCTHK33XCTHU33W

30353535505060556060

14,116.719,321.125.430.735.641.745.448.8

2,3202,7803,2603,5504,3005,2506,1507,1507,6908,200

216.00220.00271.00273.00286.00304.00312.00429.00440.00497.00

• R-410A HIGH AND MIDDLE TEMPERATURES


Cylind.cm3

Capacity(W) €


MF 60 201MF 60 202MF 60 203MF 60 204MF 60 205MF 60 206MF 60 207MF 60 208MF 60 209

ASG088CVASG108CVASL135SVASL155SVASL180SVASH218SVASH264SVATH280SVATH325CV

303535353560506060

8.810.813.515.518

21.826.428

32.5

2,0552,5503,2503,7004,3505,1806,3106,8607,760

228.00239.00257.00301.00316.00330.00434.00454.00472.00



nd


HITACHI

Dimensions:Model (A) Total Height B

GAS R22SD122CVSD156CVSL193SVSL222SVSL253SVSHY33MSHW33TSHV33YTHV33WC6U

276,4276,4325,8325,8325,8325,2340,2385,7419,5

112,2112,2129,1129,1129,1139,1139,1139,1139,1

GAS R407CCG433ECG633GCSL211CVCHY33M-UCHW33TCHV33YCTHU33W

289303

310,8340,2354,6385,7419,5

118,6118,6129,1139,1139,1139,1139,1

GAS R410AASG088CVASG108CVASL135SVASL155SVASL180SVASH218SVASH264SVATH280SVATH325CV

294294

309,7309,7309,7329,2329,2388,7388,7

118,6118,6129,1129,1129,1140,1140,1140,1140,1


• For R407C - Single-Phase HIGH

Code Model HP Cylind.cm3

CapacitorF

Capacity(W)

€

SINGLE-PHASE 230 V II 50Hz

MF 61 001 C-SBN261H5A 3,5 55,7 60 9,6 1,176.21

MF 61 002 C-SBN301H5A 4 66,8 60 11,6 1,300.97

MF 61 003 C-SBN351H5A 4,5 77,4 70 13,5 1,446.88

MF 61 004 C-SBN371H5A 5 83,2 70 14,5 1,532.64

MF 61 005 C-SBS200H15A 5,8 93,1 70 16,4 1,800.75

• For R407C - Three-phases HIGHCode Model HP Cylind.

cm3

Capacity(W) €

THREE-PHASE 400V - 50Hz

MF 61 101 C-SBN263H8A 3,5 55,7 9,6 1,176.21

MF 61 102 C-SBN303H8A 4 66,8 11,6 1,308.76

MF 61 103 C-SBN353H5A 4,5 77,4 13,5 1,558.26

MF 61 104 C-SBN373H8A 5 83,2 14,5 1,580.54

MF 61 105 C-SBN453H8A 6 100 17,6 1,659.62

MF 61 106 C-SBN235H38A 7 110,2 19,5 1,837.84

MF 61 107 C-SCN603H8A 8 137 24,5 2,394.76

MF 61 108 C-SCN753H8H 10 171,2 29,9 3,230.14

MF 61 109 C-SCN903H8H 12 205,4 34,9 3,341.52

• For R410A - Single-Phase HIGHCode Model HP Cylind.

cm3

CapacitorF

Capacity(W) €

SINGLE-PHASE 230V - 50Hz

MF 61 201 C-SBN231H5E 3 35 60 8,6 1,180.67

MF 61 206 C-SBN261H50 3,5 37,5 60 9,35 1,225.22

MF 61 202 C-SBP120H15A 3,5 39,9 60 9,8 1,326.12

MF 61 208 C-SBN301H50 4 39,9 60 9,70 1,300.97

MF 61 203 C-SBP140H15A 4 46,4 60 11,6 1,426.78

MF 61 204 C-SBP160H15A 4,6 51,8 60 13 1,471.62

• For R410A - Three-phase HIGH


Capacity(W) €

THREE-PHASE 400V - 50Hz

MF 61 301 C-SBP120H38A 3,5 39,6 10 1,326.12

MF 61 300 C-SBP130H38A 3,7 42,4 10,7 1,353.94

MF 61 302 C-SBP140H38A 4 46,4 11,7 1,426.78

MF 61 303 C-SBP160H38A 4,6 51,8 13,2 1,471.62

MF 61 304 C-SBP170H38A 5 54,8 13,9 1,555.90

MF 61 305 C-SBP205H38A 6 66,9 16,9 1,722.68

MF 61 306 C-SCP270H38B 8 89,2 22,4 3,385.95

MF 61 307 C-SCP315H38B 10 104 26 3,480.10

MF 61 308 C-SCP360H38B 11 120,2 29,8 3,574.24

MF 61 309 C-SCP400H38B 12 131,9 32,8 3,668.39

MF 61 310 C-SCP510H38B 15 171,2 43,9 4,245.70



nd


MF SCROLL HERMETIC COMPRESSORFOR AIR CONDITIONING

• For gas R407C - Heat pump three-phase


Capacity (W)€Cold Heat

THREE-PHASE MOTOR 380/415V

MF 61 321 C-SBS120H38Q 3,5 55,7 9.600 11.100 1,566.76

MF 61 322 C-SBS145H38Q 4 66,8 11.600 13.300 1,699.14

MF 61 323 C-SBS180H38Q 5 83,2 14.500 16.800 1,889.66

MF 61 324 C-SBS205H38Q 6 96,2 17.500 16.900 2,133.02

MF 61 325 C-SCS295H38Q 8 137 24.500 27.600 4,136.88

MF 61 326 C-SCS370H38Q 10 171,2 29.900 33.700 4,279.23

MF 61 327 C-SCS435H38Q 12 205,4 35.200 35.000 4,735.41

• INVERTER for gas R410A


Capacity(W) €

SINGLE-PHASE 230V

MF 61 341 C-SDP190H03A 5 38 19.000 2,778.09

MF 61 342 C-SDP205H03A 6 42,3 21.200 2,841.88

THREE-PHASE 380/415V

MF 61 351 C-SDP190H02B 5 38 19.000 2,778.09

MF 61 352 C-SDP205H02B 6 42,3 21.200 2,841.88

HERMETIC COMPRESSORS SCROLLFOR REFRIGERATION

• For gas R404A - Three-phases LOW


Capacity(W) €

THREE-PHASE MOTOR 380-415V - 50Hz

MF 61 401 C-SCN303L8A 4 66,8 5.300 1,697.28

MF 61 402 C-SCN373L8A 5 83,2 6.800 1,775.06

MF 61 403 C-SCN453L8H 6 104 8.100 5,170.54

MF 61 404 C-SCN523L8H 7 120 9.250 5,232.46

MF 61 405 C-SCN603L8H 8 137 10.500 5,322.91

MF 61 406 C-SCN753L8H 10 171,2 13.050 5,485.88



nd


MF EQUIVALENCESROTARY COMPRESSORS



nd


ESCODA Code MITSUBISHICoolingCapacity

(Kw)HITACHI

CoolingCapacity

(Kw)

UNITEHERMETIQUE

CoolingCapacity

(Kw)

CARRIER/DAEWOO

CoolingCapacity

(Kw)

R410 (230V / Single Phase / 50 Hz)

MF15 101 RN092 VHSMT 2,23 ASG088CV 2 — — TAF0922C3A 2,16

MF 15 103 RN099 VHSMT 2,4 ASG102CV — — — — —

MF 15 104 RN104 VHSMT 2,5 ASG108CV 2,5 — — — —

MF 15 107 RN125 VHSMT 3 ASG125CV — — — TAF1132C3A 2,7

MF 15 109 RN135 VHSMT 3,3 ASL135SV 3,25 — — — —

MF 15 111 RN145 VHSMT 3,6 ASL155SV 3,7 — — TCF1502C4H 3,6

MF 15 113 RN165 VHSMT 4,1 ASL180SV 4,35 — — — —

MF 15 116 RN220 VHSMT 5,48 ASH218SV 5,2 — — TCF1902C4H 4,62

MF 15 118 NN23VAAMT 5,8 ASH264SV 6,31 — — — —

MF 15 120 NN27VAAMT 6,7 ASH280SV 6,9 — — — —

MF 15 121 NN29VAAMT 7,4 ATH325CV 7,8 — — — —


MF 15 251 RE 135 VHSMT 2,2 CG433EB1-C 2,3 — — EAF090121A 2,1

MF 15 252 RE 145 VHSMT 2,4 CG533Q — RK5512C 2,4 — —

MF 15 253 RE 165 VHSMT 2,75 CG633GB1-C 2,8 RK5513C 2,66 — —

MF 15 254 RE 174 VHSMT 2,9 CH733H 3,2 RK5515C 3,24 EBF135121N 3,25

MF 15 255 RE 207 VHSMT 3,5 CSL211CV 3,5 RK5518C 3,7 — —

MF 15 256 RE 231 VHSMT 3,9 CH833U 4,1 — — ECF1802A 4,18

MF 15 258 PE 31 VPEMT 5,24 CHY33MC4 5,25 — — ECF215221A 4,9

MF 15 260 PE 36 VPEMT 6,1 CHW33T 6,15 — — — —

MF 15 261 PE 39 VPEMT 6,6 CHV33Y 7,15 — — — —

MF 15 261 PE 39 VPEMT 6,6 CTHU33W 8,2 — — — —


MF 15 221 RH 135 VHAT 2,30 SD134CV 2 RK5480E 1,9 EAF080111A 1,93

MF 15 221 RH 135 VHAT 2,30 — — RK5490E 2,2 EAF090111A 2,2

MF 15 221 RH 135 VHAT 2,30 — — — — EBF095111A 2,3

MF 15 222 RH 145 VHAT 2,45 SD156CV 2,65 RK5510E 2,5 EBF110111A 2,65

MF 15 223 RH 165 VHAT 2,80 SG633GW — RK5512E 2,8 — —

MF 15 224 RH 174 VHAT 2,90 SG733RA — — — EBF120111A 2,96

MF 15 201 RH 207 VHAT 3,60 SL193SV 3,25 RK5515E 3 EBF135111A 3,3

MF 15 201 RH 207 VHAT 3,60 SL222CV 3,74 RK5515E 3,6 ECF150111A 3,6

MF 15 202 RH 231 VHAT 4.00 SL242SV — RK5518E 4,2 ECF170111A 4,1

MF 15 225 RH 247 VHAT 4,20 SL253SV 4,3 — — ECF180211A 4,36

MF 15 204 PH31VNET 5,37 SHY33M 5,16 — — ECF210211A 5,1

MF 15 231 NH36VLDT 5,90 SHW33TU 6 — — EDF250211A 5,92

MF 15 207 NH41VNDT 7,20 SHV33YU 7,1 — — EDF292211A 6,9

MF 15 208 NH47VNDT 8,40 THU33WC6U 8,35 — — — —

MITSUBISHIELECTRIC

LICENSED BY

HITACHI

MF SPARE HERMETIC COMPRESSORS• Compressors MT for R-22, high temperature

Code Model CV Cyl.cm3

Volt.(V)

CAPACITY IN WATTS€+5°C 0°C -5°C -10°C

MF 14 022MF 14 023

MT - 22MT - 22 1-3/4 37,5 230 T

400 T 4.800 3.760 2.860 2.090 814.60

MF 14 025 MT - 28 2 47,2 400 T 6.700 5.430 4.300 3.300 876.80

MF 14 027 MT - 32 2-1/4 53 400 T 7.300 5.860 4.610 3.530 949.20

MF 14 029 MT - 36 3 60,47 400 T 8.450 6.890 5.500 4.260 1,017.40

MF 14 031 MT - 40 3,5 67,89 400 T 9.550 7.740 6.130 4.690 1,135.60

MF 14 033 MT - 50 4 85,64 400 T 11.040 8.700 6.740 5.120 1,269.20

MF 14 034MF 14 035

MT - 64MT - 64 5 107,71 230 T

400 T 14.300 11.480 9.050 6.990 1,605.20

MF 14 036MF 14 037

MT - 80MT - 80 6-1/2 135,78 230 T

400 T 17.750 14.420 11.510 8.990 2,083.10

MF 14 039 MT - 100 8 171,26 400 T 21.060 16.750 13.080 9.990 2.720,10

MF 14 041 MT - 125 10 215,44 400 T 27.490 22.120 17.540 13.670 3,199.80

MF 14 045 MT - 160 13 271,55 400 T 34.550 27.770 22.020 17.180 3,766.70

• AccessoriesCode Applications €

“ROTALOCK” SERVICE VALVES (*)

VF 01 602VF 01 601VF 01 603VF 01 602VF 01 605VF 01 604VF 01 607VF 01 609VF 01 604VF 01 608VF 01 610VF 01 611VF 01 612

V06 for MT/MTZ-18/22/28. Asp. 1/2V01 for MT/MTZ-18/22/28. Comp. 3/8V09 for MT/MTZ-32/LT-22, MT/MTZ-36/LT-28, MT/MTZ-40. Asp. 5/8V06 for MT/MTZ-32/LT-22, MT/MTZ-36/LT-28, MT/MTZ-40. Comp 1/2V07 for MT/MTZ-50/LT-40, MT/MTZ-64/LT-44. Asp. 7/8V04 for MT/MTZ-50/LT-40, MT/MTZ-64/LT-44. Comp. 3/4V02 for MT/MTZ-80, LTZ-50-88-100, MT/MTZ-100/125/160. Asp. 1-1/8V05 for MT/MTZ-100, 125, 160. Comp. 7/8V04 for MT/MTZ-80, LTZ-50-88-100, MT/MTZ-100/125/160. Comp. 3/4SE-35 Threaded inlet 1-3/4"R Solder outlet 1-3/8"SSE-36 Threaded inlet 1-3/4"R Solder outlet 1-5/8"SSE-41 Threaded inlet 2-1/4"R Solder outlet 1-5/8"SSE-44 Threaded inlet 1-3/4"R Solder outlet 2-1/8"S

10.2510.2514.5010.2527.5014.8533.4024.9614.8532.7537.0052.0054.00

JOINTS FOR ROTALOCK

VF 01 621VF 01 622VF 01 623VF 01 624

Joint of 1"Joint of 1-1/4"Joint of 1-3/4"Joint of 2-1/4"

1.251.501.751.95

SELF-ADJUSTABLE CRANKCASE HEATER

MF 14 801MF 14 802

PTC 35 W for MT/MTZ-18 to 40/LTZ-22 to 100Kit 100W (8 cyl.)

31.40201.60

ACCESSORY KIT

MF 14 805MF 14 806MF 14 807

Accessory kit for MTZ 18 to 40Accessory kit for MTZ 44 to 72Accessory kit for MTZ 80 to 160

43.3050.2055.60

"MANEUROP" LUBRICANTS FOR COMPRESSORS

MF 14 851MF 14 852MF 14 853MF 14 854MF 14 857

POE 160 PZ 1 litre for MTZ with R404/R507/R407C/R134aPOE 160 PZ 2 litres for MTZ with R404/R507/R407C/R134aMineral 160 P 2 litres for MT/LT with R22/R502Mineral 160 P 5 litres for MT/LT with R22/R502POE 160 Z 2 litres for LTZ with R404A/R507

106.30189.0063.80

121.60194.90

OILS FOR «MANEUROP»

POLYOL-ESTER OILS «SUNISO»

GF 03 203GF 03 200

• Valid for new gases: R427A, R422D, R417A, R404A, R407C,R507A, R410A, R134A and all HFCs

SL32 (for MTZ and SZ) 1 litreSL32 (for MTZ and SZ) 4 litres

20.3578.30

MINERAL OILS «SUNISO»

GF 03 011GF 03 021GF 03 013

• Valid for R-223GS (for MTZ and SZ) 4 litres3GS (for MTZ and SZ) 5 litres3GS (for MTZ and SZ) 20 litres

34.0039.50

165.20

* Non-returnable bottle



nd


• Range of temperatureMT-18 to MT-40 from+15°C to -10°C,MT-50 to MT-160from +15°C to -15°Cwith condensationtemperature +55°C

• Indicated efficiency:condensation

MT-36, MT-40

MF HERMETIC COMPRESSORS• Compressors MTZ-VI for R-404A/R-507/R-134a and R-407C

Code Model HP Cyl.cm

VoltageV

Refrige-rant

CAPACITY IN WATTS€

+5°C 0°C -5°C -10°C

MF 14 212 MTZ - 18 1-1/2 30,23 400 T R134AR407C

2.2503.290

1.7202.540

1.2701.930

890– 642.10

MF 14 214 MTZ - 22 1-3/4 38,12 400 TR134AR407CR404A

2.9604.2905.720

2.2503.2904.670

1.6702.5003.770

1.190–

3.000746.60

MF 14 217 MTZ - 28 2 48,06 400 TR134AR407CR404A

3.7205.4707.210

2.8304.2606.010

2.1303.2304.940

1.570–

4.010803.80

MF 14 220 MTZ - 32 2-1/4 53,86 400 TR134AR407CR404A

4.3706.1908.220

3.3204.8306.800

2.4703.6605.550

1.790–

4.460870.00

MF 14 222 MTZ - 36 3 60,47 400 TR134AR407CR404A

5.3807.1709.020

4.2505.6907.530

3.3004.4006.200

2.510–

5.030932.40

MF 14 224MF 14 225 MTZ - 40 3-1/2 67,89 400 T

230 T

R134AR407CR404A

5.8108.230

10.090

4.7206.6008.450

3.7705.1806.990

2.960–

5.7101,040.70

MF 14 226MF 14 227 MTZ - 50 4 85,64 400 T

230 T

R134AR404AR407C

7.14011.34010.010

5.4708.9307.750

4.1006.9305.840

2.9905.290

–1,163.00

MF 14 228MF 14 229 MTZ - 64 5 107,71 400 T

230 T

R134AR404AR407C

9.17014.54012.990

7.02011.96010.100

5.2409.2407.660

3.7807.160

–1,471.30

MF 14 230MF 14 231 MTZ - 80 6-1/2 135,78 400 T

230 T

R134AR404AR407C

12.13018.39016.600

9.48014.91013.110

7.25011.89010.100

5.3809.280

–1,909.00

MF 14 232MF 14 233 MTZ - 100 8 171,26 400 T

230 T

R134AR404AR407C

13.78021.75019.680

10.63017.29015.360

8.02013.52011.740

5.88010.390

–2,590.60

MF 14 234MF 14 235 MTZ - 125 10 215,44 400 T

230 T

R134AR404AR407C

16.94027.69026.160

13.08022.25020.690

9.84017.64016.050

7.15013.760

–2,932.50

MF 14 236MF 14 237 MTZ - 160 13 271,55 400 T

230 T

R134AR404AR407C

23.14035.44038.650

18.23028.65026.910

14.12022.86021.150

10.72017.970

–3,452.10

MF 14 251MF 14 252 MTZ - 200* 17 342,50

400 T230 T

R134AR404A

27.30043.070

21.06034.230

15.89026.770

11.65020.560 5,761.20

MF 14 253MF 14 254 MTZ - 250* 20 430,88

400 T230 T

R134AR404A

33.53054.810

25.88044.050

19.48034.920

14.16027.240 6,341.00

MF 14 255MF 14 256 MTZ - 320* 26 543,10

400 T230 T

R134AR404A

45.79070.190

36.07056.740

27.94045.580

21.20035.590 7,084.10

(*) Compressors TANDEM made up of MTZ200 (2xMTZ100), MTZ250 (2xMTZ125), MTZ320 (2xMTZ160)



nd


Range of temperatureR134a from -15°C to+20°C,R404a from -25°C to+10°C

Indicated efficiency:condensationtemperature +55°C

Overheating: 11K.

Subcooling: 8.3 K.

MF HERMETIC COMPRESSORS«SCROLL PERFORMER»

• Compressors SM for R22

Code Model HP Cyl.cm3

VoltageV

CAPACITY IN WATTS€+5°C 0°C -5°C

TO THREAD

MF 14 901 SM090 7,5 120,5 400T 19.900 16.400 13.300 3,031.10

MF 14 902 SM110 8 144,2 400T 23.800 19.600 15.900 3,451.60

MF 14 903 SM120 10 166,6 400T 27.600 22.800 18.600 3,604.40

MF 14 905 SM160 13 216,6 400T 35.800 29.600 24.100 4,230.50

MF 14 906 SM185 15 249,9 400T 41.800 34.600 28.400 4,997.00

TO WELD

MF 14 907 SM160-S 13 216,6 400T 35.800 29.600 24.100 4,230.50

MF 14 908 SM185-S 15 249,9 400T 41.800 34.600 28.400 4,997.00

Calculated performance: overheating 11K, subcooling 8,3K and condensation temperature 55°C

• Compressors SZ for R134A/R407

Code Model HP Cyl.cm3

VoltageV

CAPACITY IN WATTS€Gas +5°C 0°C -5°C

TO THREAD

MF 14 930 SZ090 7,5 120,5 400TR134A 13.200 10.700 8.500

2,916.70R407C 18.500 15.000 12.000

MF 14 931 SZ110 8 144,2 400TR134A 16.000 13.000 10.400

3,321.30R407C 22.300 18.100 14.500

MF 14 932 SZ120 10 166,6 400TR134A 18.400 14.900 11.900

3,468.40R407C 26.100 21.200 17.000

MF 14 933 SZ160 13 216,6 400TR134A 24.500 19.800 15.800

4,230.50R407C 35.200 28.800 23.200

MF 14 934 SZ185 15 249,9 400TR134A 27.700 22.400 17.800

4,808.40R407C 39.200 32.000 25.700

TO WELD

MF 14 935 SZ160-S 13 216,6 400TR134A 24.500 19.800 15.800

4,230.50R407C 35.200 28.800 23.200

MF 14 936 SZ185-S 15 249,9 400TR134A 27.700 22.400 17.800

4,808.40R407C 39.200 32.000 25.700

Calculated performance: overheating 11K, subcooling 8,3K and condensation temperature 55°C

• Compressors SH for R410A

Code Model VoltageV

CAPACITY IN WATTS€-15°C -10°C -5°C 0°C +5°C +10°C +15°C

MF 14 951 SH090-4A 400T 8.865 11.040 13.563 16.478 19.833 23.672 28.042 3,544.50

MF 14 952 SH105-4A 400T 10.810 13.426 16.429 19.879 23.832 28.349 33.487 4,049.10

MF 14 953 SH120-4A 400T 11.911 14.841 18.223 22.148 26.649 31.797 37.654 4,228.30

MF 14 955 SH161-4A 400T 15.665 19.429 23.790 28.824 34.611 41.229 48.755 5,141.10

MF 14 958 SH180-4A 400T 16.911 21.348 26.461 32.347 39.107 46.839 55.641 6,091.90

MF 14 960 SH240-4A 400T 24.059 29.973 36.824 44.731 53.813 64.191 75.983 9,219.90

MF 14 962 SH300-4A 400T 31.004 38.538 47.276 57.370 68.970 82.226 97.289 10,959.50

Calculated performance: overheating 10K, subcooling 0K,50Hz and condensation temperature 50°C



nd


MF SPARE «R22»HERMETIC COMPRESSORS

• «STANDARD and ULTRA-QUIET» Series

Code Model CV Cylind.cm3

Capacity in WattsVoltage €+5°C 0°C -5°C -10°C

MF 16 010MF 16 005MF 16 009

H23B22QABHH23B24QABKH23B35QABK

1-1/22

2-3/4

39,9842,7756,70

4.9045.2427.549

3.8244.2745.964

2.8793.1594.552

2.0652.4493.327

220 M220 M220 M

617.83652.62794.03

MF 16 012MF 16 013MF 16 014

H23A383ABKH23A42QABKH23A46QABK

33-1/43-1/2

66,3272,5177,83

8.5109.183

10.299

6.6957.2138.028

5.1465.5506.122

3.8344.1694.507

220 M220 M220 M

794.54856.63913.42

TUBES FOR WELDING

MF 16 021MF 16 022MF 16 023MF 16 024MF 16 025MF 16 027

H23B20QDBEH23B22QDBEH23B24QDBEH23B28QDBEH23B30QDBEH23B35QDBE

1-1/21-3/4

22-1/42-1/42-3/4

35,7239,9842,7748,6751,6256,70

4.3604.8585.3196.0356.6667.358

3.3903.7744.2284.8015.3265.888

2.5532.8413.2883.7294.1474.590

1.8452.0542.4812.8163.1223.457

380 T380 T380 T380 T380 T380 T

869.94869.94869.94902.57922.82929.58

MF 16 031MF 16 032MF 16 033MF 16 035MF 16 037

H23A383DBEH23A42QDBEH23A463DBEH23A543DBEH23A62QDBE

33-1/43-1/2

45

66,3272,5177,8490,88101,1

8.2479.239

10.15512.13913.957

6.4887.2577.9429.627

11.250

4.9875.5846.1037.4418.814

3.7154.1954.6025.5846.603

380 T380 T380 T380 T380 T

929.581,060.131,089.391,377.491,449.52

MF 16 041 H29A723DBV 6 112,23 16.465 13.426 10.684 8.259 380 T 1,811.90

TUBES TO THREAD

MF 16 045MF 16 046MF 16 047

H2BG094DBEH2BG104DBEH2BG124DBE

7-1/2910

167,5190,6219,6

18.79522.06425.623

14.55217.27320.416

11.01513.18915.841

––

11.873

380 T380 T380 T

2,429.902,786.683,226.08

MF 16 051 H25G144DBE 12 246,6 36.950 29.354 22.650 16.840 380 T 3,277.71

MF 16 055MF 16 056MF 16 057MF 16 058

H2NG184DPEH2NG204DREH2NG244DREH2NG294DPE

15182025

335,0381,3439,4508,5

47.98555.72466.72676.011

37.48943.70753.12561.316

28.14533.24941.34648.738

––––

380 T380 T380 T380 T

5,641.056,220.416,635.727,157.73

MF 16 201MF 16 202MF 16 203MF 16 204MF 16 205MF 16 206MF 16 207MF 16 208MF 16 209MF 16 210MF 16 211MF 16 212MF 16 213MF 16 214MF 16 215MF 16 216MF 16 217MF 16 218MF 16 219MF 16 220MF 16 221

H23B20QDBDH23B22QDBDH23B24QDBDH23B28QDBDH23B30QDBDH23B32QDBDH23B35QDBDH23A383DBLH23A423DBLH23A463DBLH23A503DBLH23A543DBLH23A563DBLH23A623DBLH29A723DBLH2BG094DBDH2BG104DBDH2BG124DBDH25G144DBDH2NG184DPDH2NG184GPD 2 vel.

1,51,75

22,252,52,52,75

33,253,544

4,55,06,07,509,010,012,015,015,0

220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz220/200V III 50 Hz - 230/208V III 60 Hz

913.82913.82913.82948.71968.97968.97974.60974.60

1,113.021,143.411,445.011,445.011,445.011,522.671,904.182,551.502,925.503,388.993,442.915,922.136,658.67

Measured efficiency: condensation temperature +55°C; Undercooling: 8.33°C; Overheating: 11.11°C; For different voltages, pleasecontact us. Prices do not include electrical sets, connecters nor service



nd


BristolCompressors

MF HERMETIC COMPRESSORS

• High temperature Series (R-407C-R404A)

Code Model CV Cylind.cm3

VoltageRend.

frig. ARIW

€

SINGLE PHASE 220V II

MF 16 131 H79B17UABH 1,25 32,27 220 II 3.630 608.85MF 16 132 H79B20UABH 1,5 36,69 220 II 4.297 638.10MF 16 134 H79B24UABH 2 41,93 220 II 5.070 670.74MF 16 135 H79B28UABH 2,25 47,5 220 II 5.996 720.26MF 16 137 H79B32UABH 2,5 53,4 220 II 6.863 785.53MF 16 138 H79B35UABH 2,75 57,66 220 II 7.706 817.04MF 16 139 H73A383ABK 3 66,18 220 II 8.092 835.04MF 16 140 H73A423ABK 3,25 72,56 220 II 8.739 882.31MF 16 141 H73A463ABK 3,5 77,81 220 II 9.800 938.58

THREE-PHASE 220V III

MF 16 261 H79B22UDBD 2 42,4 220 III 4.967 941.96MF 16 262 H79B28UDBD 2,25 50,1 220 III 5.983 998.22MF 16 263 H79B33UDBD 2,75 54,1 220 III 7.112 1,003.86MF 16 264 H73A383DBL 3 66,18 220 III 7.992 1,017.36MF 16 265 H73A423DBL 3,25 72,56 220 III 8.867 1,147.91MF 16 266 H73A463DBL 3,5 77,81 220 III 9.861 1,177.17MF 16 267 H73A543DBL 4 90,91 220 III 11.633 1,491.16MF 16 268 H73A623DBL 5 101,06 220 III 13.050 1,568.81MF 16 269 H79A723DBL 6 117,12 220 III 17.434 1,960.45MF 16 270 H78G094DBD 7,5 167,40 220 III 19.500 2,666.22MF 16 271 H78G104DBD 9 190,50 220 III 21.912 3,056.29MF 16 272 H78G124DBD 10 219,51 220 III 25.955 3,541.57MF 16 273 H75G144DBD 12 246,47 220 III 31.472 3,596.64MF 16 274 H7NG184DPD 15 334,79 220 III 40.514 6,189.44MF 16 275 H7NG204FRQ 18 381,65 220 III 45.096 6,825.02MF 16 276 H7NG244FRD 20 439,00 220 III 54.586 7,281.63MF 16 277 H7NG294FPD 25 508,11 220 III 61.800 7,854.10

THREE-PHASE 380V III

MF 16 153 H79B22UDBV 2 42,4 380 III 4.957 899.20MF 16 154 H79B28UDBV 2,25 50,1 380 III 5.967 949.83MF 16 157 H79B33UDBV 2,75 54,1 380 III 7.100 956.60MF 16 158 H73A383DBE 3 66,18 380 III 7.843 968.97MF 16 159 H73A423DBE 3,25 72,56 380 III 8.792 1,092.77MF 16 160 H73A463DBE 3,5 77,81 380 III 9.686 1,122.03MF 16 162 H73A543DBE 4 90,91 380 III 11.483 1,420.26MF 16 164 H73A623DBE 5 101,06 380 III 12.925 1,494.53MF 16 165 H79A723DBV 6 117,12 380 III 17.434 1,867.04MF 16 166 H7BG094DBE 7,5 167,40 380 III 19.558 2,538.88MF 16 167 H7BG104DBE 9 190,50 380 III 22.855 2,911.74MF 16 168 H7BG124DBE 10 219,51 380 III 26.659 3,372.93MF 16 169 H75G144DBE 12 246,47 380 III 31.472 3,428.01MF 16 170 H7NG184DPE 15 334,79 380 III 40.514 5,894.60MF 16 171 H7NG204DRE 18 381,65 380 III 46.521 6,499.21MF 16 172 H7NG244DPE 20 439,00 380 III 54.586 6,936.31MF 16 173 H7NG294DPE 25 508,11 380 III 62.199 7,478.96

ARI conditions:– Evaporating temperature +7,2°C– Condensing temperature 54,4°C– Ambient temperature 35°C– Líquid temperature 46,1°C– Return gas temperature 18,3°C.



nd


BristolCompressors

All compressors have caseresistance built in .

MF HERMETIC COMPRESSORS

• Air conditioning and heat pump (R-407C)

Code Model Cylind.cm3

VoltageV

Capacity W€

Cold Heat p.

SINGLE PHASE 220V II

MF 16 241 H71J193ABH 35,1 220 I 4.000 3.300 703.38

MF 16 242 H71J233ABK 42,8 220 I 5.300 4.900 737.14

MF 16 243 H71J273ABK 47,8 220 I 6.100 5.200 832.80

MF 16 244 H71J323ABK 53,2 220 I 7.100 5.700 893.57

MF 16 245 H71J383ABK 63,6 220 I 8.700 7.200 902.57

THREE-PHASE380V III

MF 16 246 H71J233DBV 42,8 380 III 5.300 4.900 1,011.74

MF 16 247 H71J253DBV 45,3 380 III 5.500 4.700 1,047.75

MF 16 248 H71J323DBV 53,2 380 III 7.200 6.000 1,063.50

MF 16 249 H71J363DBV 60,1 380 III 8.100 6.800 1,098.39

MF 16 250 H71J383DBV 63,6 380 III 8.700 7.200 1,124.27

MF 16 251 H71J423DBV 69,4 380 III 9.100 7.400 1,147.91

MF 16 252 H71J433DBV 70,6 380 III 9.700 8.000 1,151.29

HERMETIC COMPRESSORS«ISOBUTANE R-600a»

• Low temperature

Code Model CV Cil.cm3

Capacity W€

-10°C -30°C

SINGLE PHASE 230/240V 50HZ

MF 11 306 EMY32CLC 1/8 5,96 150 40 126.17

MF 11 307 EMY40CLC 1/6 7,23 190 60 130.63

MF 11 303 NBM1114Y 1/4 10,00 300 100 153.00

MF 11 304 NBM1116Y 1/3 12,30 360 140 156.00

MF 11 305 NBM1118Y 1/3 14,30 410 160 160.00



nd


BristolCompressors

Old model New model

BPE1072Y EMY32CLC

BPE1084Y EMY40CLC

EM Series

MF HERMETIC COMPRESSORS• CR, QR series for R-22

Code Model Voltage Movementm3/h

P. abs.(Kw) €

TUBES FOR WELDING

MF 19 157MF 19 158 CR33KQE-28SBM PFT

TFD 10,5 2,67 1,183.001,234.00

MF 19 161MF 19 162 CR41KQE-28SBM PFT

TFD 12,8 3,52 1,285.001,336.00

MF 19 163MF 19 164 CR47KQE-28SBM PFZ

TFD 14,1 3,9 1,510.001,571.00

MF 19 165 CR53KQE-28SBM TFD 15,6 4,34 1,652.00

MF 19 070 CRNQE-0500 TFD 17,7 5,02 1,724.00

Model FixingSuction Discharge

Welded Welded

CR-33-KQE 190x190 3/4 3/8

CR-41-KQE 190x190 3/4 3/8

CR-47-KQE 190x190 7/8 1/2

CR-53-KQE 190x190 7/8 1/2

CRNQE-0500 190x190 7/8 1/2

«SCROLL» COMPRESSORS• Gas R-22

Code Model CV Cil.m3/h

Motorty

Capacity W€

+5°C 0°C -5°C -10°C

TUBES FOR WELDING

MF 19 501 ZR-22-K3 2 5,34 TFD 4.895 4.025 3.255 2.575 1,194,20

MF 19 502ZR-28-K3 2,5 6,83

PFJ6.320 5.270 4.345 3.535

1,227,00

MF 19 527 TFD 1,249,00

MF 19 503 ZR-34-K3 3 8,03 PFJ 7.530 6.275 5.170 4.210 1,257.59

MF 19 506ZR-40-K3 3,5 9,44

PFJ8.865 7.380 6.095 4.980

1,368.30

MF 19 505 TFD 1,409.60

MF 19 507 ZR-48-K3 4 11,93 TFD 10.760 8.950 7.380 5.775 1,554.50

MF 19 509 ZR-61-KC 5 14,4 TFD 13.130 10.850 8.810 7.040 1,736.20

MF 19 511 ZR-72-KC 6 17,0 TFD 15.980 13.400 11.110 9.090 1,939.94

MF 19 530 ZR-81-KC 6,5 19,2 TFD 18.060 15.020 12.320 9.990 2,177.75

TUBES FOR THREAD

MF 19 514 ZR-90-K3 8 20,9 TWR 19.560 16.370 13.610 11.180 3,318.20



nd


Compressor Volt. +/-HzPFJTFD/TWDTF5TWR

220-240/1/50380-420/3/50200-220/3/50220-240/3/50

Suction DischargeThread Tube Thread Tube

ZR/90 1-3/4" 1-1/8" 1-1/4" 3/4"

Old model New modelCRGQ-0250 CR33KQE-28SBMCRKQ-0325 CR41KQE-28SBMCRLQ-0350 CR47KQE-28SBMCRMQ-0400 CR53KQE-28SBMCRNQ-0500 CRNQE-0500-550

MF «SCROLL» COMPRESSORSAIR CONDITIONERS

• Gas R-407C

Code Model CV Cyl.m3/h

Motortype


+5°C 0°C -5°C -10°C

FOR WELDING

MF 19 551 ZR-18-K4E 1,5 4,35 PFJ 3.750 3.050 2.450 1.930 1,100.00

MF 19 552ZR-22-K3E 1,8 5,34

PFJ4.550 3.650 2.900 2.270

1,190.00

MF 19 553 TFD 1,210.00

MF 19 554ZR-28-K3E 2,5 6,83

PFJ5.900 4.750 3.800 2.950

1,260.00

MF 19 555 TFD 1,270.00

MF 19 556ZR-34-K3E 3 8,03

PFJ7.000 5.650 4.500 3.500

1,320.00

MF 19 557 TFD 1,340.00

MF 19 558ZR-40-K3E 3,5 9,44

PFJ8.200 6.650 5.300 4.150

1,410.00

MF 19 559 TFD 1,430.00

MF 19 560ZR-48-K3E 4 11,93

PFJ10.200 8.300 6.750 5.350

1,550.00

MF 19 561 TFD 1,580.00

MF 19 562ZR-61-KCE 5 14,4

TFD12.450 10.000 7.950 6.200

1,820.00

MF 19 563 TF5 1,856.00

MF 19 564ZR-72-KCE 6 17,0

TFD14.750 12.100 9.700 7.550

2,000.00

MF 19 565 TF5 2,122.00

MF 19 566ZR-81-KCE 6,5 19,2

TFD16.700 13.600 10.900 8.550

2,250.00

MF 19 567 TF5 2,387.00

TO THREAD

MF 19 568 ZR-90-K3E 8 20,9 TWD 18.700 15.200 12.150 9.550 3,121.00

ACCESSORIES

MF 19 521MF 19 523MF 19 522MF 19 524MF 19 533

MF 19 526MF 19 534MF 19 525MF 19 535MF 19 536

• Single-Phase equipment (Run Capacitor)Mod. ZR 18/22 K3Mod. ZR 28 K3Mod. ZR 34 K3Mod. ZR 40 K3Mod. ZR 48 K3• Crank Case ResistanceMod. ZR 18 (40 W) at 240V IIMod. ZR 22/81 (59/70 W) at 240V IIMod. ZR 90/19 (45/70 W) at 240V IIMod. ZR 250 (120 W) at 240V IIMod. ZR 310 at 240V II

58.6058.6065.8067.2074.40

58.4058.4073.30

113.00123.00



nd


VOLTAGE:

Compressor Volt. +/-Hz

PFJTFD/TWD

TF5TWR

220-240/1/50380-420/3/50200-220/3/50220-240/3/50

TFD/TWDPFJ

460/3/60265/1/60

Condensation temperature:+50°C

Gas suction temperature:+25°C

Overheating: 10K

MF «SCROLL» COMPRESSORAIR CONDITIONERS

• Gas R-410A

Code Model CV Cyl.m3/h

Motortype


+5°C 0°C -5°C -10°C

FOR WELDING

MF 19 631ZP-23-K3E 1.9 4.07

PFJ5,000 4,100 3,350 2,690

1,300.00

MF 19 632 TFD 1,320.00

MF 19 633ZP-26-K3E 2.2 4.42

PFJ5,450 4,500 3,650 2,950

1,370.00

MF 19 634 TFD 1,390.00

MF 19 635ZP-32-K3E 2.6 5.37

PFJ6,750 5,650 4,550 3,500

1,480.00

MF 19 636 TFD 1,500.00

MF 19 637ZP-41-K3E 3.4 6.87

PFJ8,800 7,250 5,950 4,800

1,620.00

MF 19 638 TFD 1,630.00

MF 19 639 ZP-54-K3E 4.6 9.44 TFD 11,750 9,850 8,100 6,550 1,930.00

MF 19 640 ZP-61-KCE 5 8.93 TFD 13,050 10,700 8,600 6,700 2,020.00

MF 19 641 ZP-72-KCE 5.5 11.68 TFD 15,400 12,800 10,550 8,650 2,250.00

MF 19 642 ZP-83-KCE 6.5 13.43 TFD 17,700 14,650 12,050 9,750 2,450.00

TO THREAD

MF 19 651 ZP-90-KCE 7.5 14.64 TFD 19,200 15,900 12,900 10,300 3,210.00

MF 19 652 ZP-103-KCE 9 16.76 TFD 22,400 18,600 15,200 12,100 3,960.00

MF 19 653 ZP-120-KCE 10 19.76 TFD 26,000 21,600 17,600 14,150 4,330.00

MF 19 654 ZP-137-KCE 12 22.12 TFD 29,300 24,300 19,900 16,100 4,590.00

MF 19 655 ZP-182-KCE 15 29.08 TFD 39,100 32,700 27,100 22,200 5,250.00

MF 19 656 ZP-235-KCE 20 36.33 TWD 50,500 42,000 34,500 28,100 8,300.00

MF 19 657 ZP-295-KCE 25 46.7 TWD 63,500 53,000 44,000 36,000 9,020.00

MF 19 658 ZP-385-KCE 30 60.79 TWD 82,500 68,500 56,500 46,500 10,510.00

ACCESSORIES

MF 19 661MF 19 662MF 19 663MF 19 664

• Single-Phase equipment (Run Capacitor)Mod. ZP-23Mod. ZP-26Mod. ZP-32Mod. ZP-41

58.6058.6065.8074.40

MF 19 665MF 19 666MF 19 668MF 19 669

• Crank Case ResistanceMod. ZP-23/83 (70W)Mod. ZP-90/182 (90W)Mod. ZP-235 (120W)Mod. ZP-295/ 385(150W)

58.4073.30

113.00123.00

* Capacity at 50°C Temperature of condensing



nd


CL ROTATIVE COMPRESSORS AIR CONDITIONNINGCode Brand Model Gas Kcal/h €

CL 97 618 Daikin JT170G- P8Y1 R410A 17,500 556.00CL 98 200 Galanz QXR-AB132Z235CBA R410A 3,000 146.00CL 98 662 Gree QXA- B102uC130 R410A 2,500 126.00CL 98 663 Gree QXA- B120C150 R410A 3,000 122.00CL 96 990 Highly ASL145SV-C7LU R410A 3,000 222.00CL 96 007 Highly SHY33MC4-G R22 4,000 248.00CL 98 294 Highly ASH201SV-C8LU R410A 4,500 221.00CL 98 665 Highly ASH232SV-C8LU R410A 6,000 179.00CL 96 002 Hitachi SG 433 EB2 R22 2,000 180.00CL 93 505 Hitachi CG633PB-C R407C 2,500 119.00CL 93 507 Hitachi CHX33SC4-U R407C 4,500 219.00CL 92 601 Hitachi JU1015D1/JU1015D4 R410A 6,000 348.00CL 99 171 LG NK134PAA R410A 2,000 186.00CL 99 173 LG QK134PAD R410A 2,500 262.00CL 99 175 LG GK094PAA R410A 3,000 154.00CL 91 003 Matsushita Electric 2RS126D3AD01 R22 2,000 219.00CL 92 021 Matsushita Electric 4PS132E R407C 2,000 129.00CL 96 011 Matsushita Electric 2P14S225ANC R22 2,000 199.00CL 91 001 Matsushita Electric 2PS154D2DF01 R22 2,500 171.00CL 91 008 Matsushita Electric 2PS154G5AA01 R22 2,500 320.00CL 96 012 Matsushita Electric 2P17C225CNB R22 2,500 219.00CL 92 023 Matsushita Electric 4KS225E R410A 3,000 182.00CL 91 006 Matsushita Electric 2KS282D3AC01 R22 4,500 327.00CL 91 007 Matsushita Electric 2JS324G5AA01 R22 5,000 491.00CL 98 623 Mitsubishi KNB092FHBMC R410A 3,000 147.00CL 98 670 Mitsubishi RN135VHEMC R410A 3,000 134.00CL 92 351 Mitsubishi TNB220FLBM1 R410A 7,500 489.00CL 92 352 Mitsubishi TNB306FPGM R410A 9,000 515.00CL 97 620 Panasonic 5JS330EAA21 R410A 9,000 243.00CL 98 916 Quangdong DA89X1C -20EZ R410A 3,000 336.00CL 96 317 Rechi Precision 39A173A R410A 2,000 125.00CL 91 013 Rechi Precision 48R273A R22 2,500 193.00CL 93 506 Samsung F8D129JU1JL R407C 3,000 131.00CL 96 018 Sanyo C-1RN70H5A R407C 2,000 244.00CL 96 019 Sanyo C-1RN80H5A R407C 2,500 262.00CL 96 033 Sanyo C-RB237H02A R407C 2,500 266.00CL 96 034 Sanyo C-7RB267H03A R407C 2,500 341.00CL 96 006 Sanyo C-RV232BH1A R22 3,000 210.00CL 96 028 Sanyo C-RN80HC R407C 3,000 236.00CL 99 174 Sanyo C-R95H5K R410A 3,000 376.00CL 98 911 Sanyo C-6RZ146H1A R410A 4,500 269.00CL 91 011 SIAM Corporation NH44VNDT R22 6,000 508.00CL 94 014 TECO Electric KETC176ELBC-A R407C 3,000 180.00CL 96 010 Tecumseh AWG5532EVA R22 6,000 632.00CL 98 909 Toshiba PA103M1C- 4DZD R410A 2,000 199.00CL 92 518 Toshiba PG180X1C-4DZDE3 R407C 2,500 129.00CL 92 508 Toshiba PG225X2C- 4F8 R407C 3,000 152.00CL 92 600 Toshiba DA89X1C -23FZ R407C 3,000 150.00CL 93 509 Toshiba PG215x2C-4FT R407C 3,000 159.00CL 93 512 Toshiba PA150x2C-4FT R410A 3,000 159.00CL 98 910 Toshiba PA118M1C- 4FZ2 R410A 3,000 203.00CL 92 521 Toshiba PG290X2C- 4FT1 R407C 4,500 167.00CL 92 852 Toshiba PA108X1C- 4FTDE R410A 4,500 280.00CL 95 050 Toshiba PG330X2CS- 4KU1 R407C 4,500 394.00CL 92 991 Toshiba PA290X3CS R410A 6,000 282.00CL 93 508 Toshiba PG440x3CS-4MU1 R407C 6,000 273.00CL 93 514 Toshiba PA290X3CS-4MU1 R410A 6,000 205.00CL 92 022 Xian Qingan YZG – 27RY1T1 R22 2,500 136.00



nd


MITSUBISHIHEAVY INDUSTRIES, LTD.

HITACHI

TOSHIBA

BLADES FOR AXIAL FANS

Code Item Diometer(cm) €

AXIAL FAN

CL 92 007 Axial fan (MUV 07-09CN/HN) 31 10.00

CL 96 404 Axial fan (MUV-07-09) 31,2 10.00

CL 92 535 Axial fan (MUV 09 HE) 31,5 6.00

CL 98 260 Axial fan (MUP 09 HI / WILZ) 32,5 7.00

CL 92 055 Axial fan (MUV 12-18 CN/HN) 36 10.00

CL 98 202 Axial fan (MUP 12 HI/WILLZ) 40 4.00

CL 93 753 Axial fan (MUP 09-12 HE/HA/HG/HF) 40 4.00

CL 94 535 Axial fan 40 4.00

CL 98 241 Axial fan (MUP 12 HJ) 40 5.00

CL 98 627 Axial fan (MUPR 09 12 HG) (FW-INV 2250 3000) 40 4.00

CL 96 405 Axial fan (MUP-16/MUV-18) 40,2 8.00

CL 96 400 Axial fan (MUP7-9-12, MUPR11N, MUC-8-12HN) 41 10.00

CL 92 851 Axial fan (MUCSR 18 HF) 43 7.00

CL 98 240 Axial fan (MUP 18 24 HI) 45 7.00

CL 96 416 Axial fan (MUCS 24-41)(MUC-34-41-HNC) 45 13.00

CL 93 754 Axial fan (MUP 18-24 HE/HA/HG/HF) 45 4.00

CL 96 403 Axial fan (MUP-24) 45 15.00

CL 96 402 Axial fan (MUP-21,16CN/HN MUPR9x3 7x4 45 12.00

CL 92 730 Axial fan (MUC/MUCS/MU S/T-24HF/MUCR-24HF) 46 9.00

CL 97 635 Axial fan (MUC 24 HG) 46 3.00

CL 97 605 Axial fan (MUC 30 36 HG) 47 7.00

CL 95 476 Axial fan (MU S/T 24 28 36 42 52 HE) 47 12.00

CL 92 617 Axial fan (MUPR 18HE2/27HE3/MUCR-48HF) 47 7.00

CL 92 728 Axial fan (MUC/MUCS48-60HF/MUCR 36-48-60HF) 47 7.00

CL 96 401 Axial fan(MUP-18,MUPR 9x2) 48 15.00

CL 98 628 Axial fan (MUPR 18-24 HG) 51 8.00

CL 92 727 Axial fan (MUC/MUCS/MU S/T 30-36HF) 55 15.00

FITTINGS

CL 93 728 Support for outdoor fans 41x17x10 6.00



nd


CL 93 728

CL 93 753

CL 93 754

TANGENTIAL IMPELLER INDOOR UNITCode Item Length

cmDiam.

cm €

CL 92 008 Centrifugal fan (MUV07-09CN/HN) 9 17,5 10.00

CL 92 056 Centrifugal fan (MUV12-18CN/HN) 11 21 10.00

CL 92 102 Plastic turbine (MU ECO 09-12-15) 13,5 12 2.00

CL 92 534 Fan evaporator (centrifugal) (MUV09 HE) 17,5 9 6.00

CL 92 776 Fan centr.+casing (MUC18-24-30-36-48 HF) 19 24 11.00

CL 95 475 Centrifugal fan (MU S/T HE) 19 15 8.00

CL 92 115 Metallic turbine (MU ECO 09/6R-09/6R3) 35 12 8.00

CL 98 515 Tangential fan (MUR) 42 7,5 20.00

CL 93 705 Tangential impeller (MUP09-12 HE/HA/HG/HF) 58,5 10 15.00

CL 96 417 Tangential fan (MUPR-07x4-09x2-09x3 HN) 58,5 9,5 7.00

CL 94 532 Tangential fan 100x600 (diam/length) 58,5 10 5.00

CL 98 962 Tangential fan (WZ-25 32) 58,5 10 6.00

CL 98 219 Tangential fan UI (MUP 9 12 HI HJ) 60 9 6.00

CL 96 409 Tangential fan (MUP-07-09-12-16) indoor ut. 61,5 9 17.00

CL 92 132 Metallic fan (MU ECO 15/8R-15/8R3) 62,5 12 17.00

CL 96 415 Tangential fan (MUR 12) 65,5 9 14.00

CL 98 259 Tangential turbine UI (MUP 18 HI) 68 10 7.00

CL 98 239 Indoor tangential turbine (MUP 18 HJ) 68 10 7.00

CL 96 410 Tangential fan (MUP-18-21) indoor ut. 72 9 21.00

CL 92 669 Tangential turbine MUPR-18 HE 74 11 9.00

CL 98 250 Tangential MUP 24 HI 80,5 12 12.00

CL 94 533 Tangential fan 100x850 (diam/length) 85 10 8.00

CL 93 704 Tangential fan (MUP 18-24 HE/HA/HG/HF) 85,5 10 8.00

CL 96 411 Tangential fan (MUP-24) indoor ut. 95,5 11 15.00

Code Item Height €

FITTINGS

CL 93 725 SILENT BLOCK A: 3 cm - Ø3,4 (cm) 8.00

CL 98 216 Bearing turbine UI (MUP 12 HI) Ext. 3,2cm Int.6,08mm 1.00

CAPACITORS FOR FANSCode Description €

CL 94 500 Capacitor motor fan 1 μF 4.00

CL 94 501 Capacitor motor fan 1,5 μF 4.00




CL 94 505 Capacitor motor fan. 3 μF 4.00







CL 94 512 Capacitor motor fan μF 4.00





nd


CL 93 704

CL 93 705

CL 93 725

MOTORS FOR FANS OUTDOOR UNITSCode Item Power

(W)

Lengthshaft

(cm) (A)

Size Ø(cm) (C) €

MOTORS FOR OUTDOOR UNITS

CL 98 261 Motor outdoor (MUP09 HI / WILLZ) 23 6 10 21.00

CL 92 608 Motor YDK24-6G 5 cables (MUPR 12HE) 24 6 14 42.00

CL 93 605 Motor YDK25-6 (MUP09 HE/HA/HG/HF) 25 7 10 20.00

CL 96 287 Motor FW25C (MUPR-11N) 25 6,5 16 22.00

CL 98 201 Motor (MUP 12 HI/WILLZ) 30 5 10 22.00

CL 98 689 Motor (MUP 09 HK) (FW 2250) 30 5,5 15 23.00

CL 96 299 Motor FW30G (MUC-8 HNC) 30 6,5 15 25.00

CL 98 625 Motor (MUPR 09 12 HG) 30 5,5 16 24.00

CL 98 690 Motor (MUP 12 18 HK) (FW 3000 4500) 35 6 14 24.00

CL 96 271 Motor FW 30 E (MUP-12 CN/HN) outdoor unit 36 10 10 36.00

CL 96 278 Motor FW 38A (MUP 07x2-09x2C-16 CN) 38 12 12 47.00

CL 91 208 Motor (A 500) 40 10 21 64.00

CL 96 272 Motor FW 48 A (MUP-16 CN/HN) outdoor unit 48 5,8 16 37.00

CL 96 283 Motor FN50T (MUCS 41) 50 11 12 45.00

CL 92 850 Motor (MUCSR 18 HF) 50 7 16 54.00

CL 92 719 Motor YDK53-6H (MUC/MUCS/MU S/T 24HF) 53 6,5 18 66.00

CL 92 607 Motor YDK53-6M (MUPR 18HE2/27HE3) 53 9 18 76.00

CL 92 746 Motor YDK53-6K (MUC 18 HF) 53 8,5 19 63.00

CL 96 284 Motor FW60D (MUCS 18CN-24) 60 7,5 11 46.00

CL 96 274 Motor LW 60 B (MUP-24-18-12x2 CN/HN) 60 7,3 12 57.00

CL 96 297 Motor FW60S/68T (MUCS-24 HN, MUC-24-HNC) 60 7,5 12 36.00

CL 96 279 Motor FW 60J (MUP 07x2H-09x2H) 60 7 12 49.00

CL 98 626 Motor (MUPR 18 24 HG) 60 10,5 16 36.00

CL 96 296 Motor FW60B (MUCS-18 HN) 60 7 17 31.00

CL 96 289 Motor FW60K (MUPR-09x3-07x4 HN) 60 8 16 42.00

CL 96 288 Motor FW60R (MUPR-09x2 HN) 60 9 17 36.00

CL 98 908 Motor (FAN WORLD SEI 4500 19684) 60 10,5 16 45.00

CL 92 721 Motor YDK65-6F (MUC/MUCS/MU S/T 48-60HF) 65 8 19 67.00

CL 97 260 Motor (MUC/MU S/T-18-24 CN/HN) 66 6,5 16 42.00

CL 93 607 Motor YDK68-6A (MUP 18-24 HE/HA/HG/HF) 68 7 15 37.00

CL 96 908 Motor (MUCS 41 H) 68 7 12 47.00

CL 96 273 Motor LW 80 D (MUP-18-21-9x2 CN/HN) 68 9 12 45.00

CL 96 292 Motor LW68A (MUC-34-41-HNC) 68 7,3 11,8 54.00

CL 97 277 Motor B1-1/8-2F (MUC-18-24-44-60) 74 7,5 16 53.00

CL 98 235 Motor (MUP18 HJ) 75 8 15,5 43.00

CL 96 270 Motor FW 25 E (MUP-07-09 CN/HN) outdoor ut. 90 5,5 15 36.00

CL 96 293 Motor LW92A (MUCO-55 HN) 92 6,5 17 63.00

CL 92 777 Motor YDK100-6A (MUCR 48HF) 100 8 19 102.00

CL 97 276 Motor (MUC-30-36) 103 5,5 19,5 53.00

CL 92 720 Motor YDK250-6D (MUC/MUCS 30-36HF) 200 8 14 124.00

CL 91 227 Motor (AUE 253) 280 4,5 14 51.00



nd


MOTORS FOR FANS INDOOR UNITSCode Item Power

(W)

Lengthshaft

(cm) (A)

Size Ø(cm) (C) €

MOTORS FOR INDOOR UNITS

CL 96 257 Motor 8H (MUP-12+9 HN) 6 4 11,5 24.00

CL 96 260 Motor FN 8 E-PG (MUP-07-09-12) 8 4 9 38.00

CL 98 658 Motor (MUP 09 12 HK / MUP09 HG) 10 5 9 15.00

CL 96 258 Motor FN10E (MUPR-11N) 10 4 11 26.00

CL 96 294 Motor FN11T (MUCS-18 CN/HN) 11 4,8 14 26.00

CL 93 651 Motor YYK13-4 (MUP09-HE/HA/HG/HF) 13 2,5 9 20.00

CL 92 604 Motor RPG13H (MUPR07-09 HEM) 13 3 11 25.00

CL 96 256 Motor FN14D (MUPR-07x4-09x2-09x3 HN) 14 3 9 22.00

CL 98 213 Motor (MUP 12 HI HJ) 19 3 9 14.00

CL 93 652 Motor YYK19-4 (MUP12 HE/HA/HG/HF) 19 2,5 9 20.00

CL 98 264 Motor (MUP 09 12 HI) 19 3 9 18.00

CL 93 653 Motor YYS20-4-5A (MUP18 HE/HA/HG/HF) 20 8 10 37.00

CL 98 660 Motor (MUPR 12 HG) (FW-INV 3000) 20 5 9 15.00

CL 98 659 Motor (MUP18 24 HK / MUPR18 HG) 20 5 9 20.00

CL 96 259 Motor (MUR-12) indoor ut. 20 3,1 9,2 29.00

CL 98 904 Motor (FAN WORLD SEI 3000 19683) 20 4 10,5 28.00

CL 96 261 Motor FN 20 F-PG (MUP-16) indoor ut. 20 4 11 38.00

CL 96 262 Motor FN 20 D-PG (MUP-18-21) ind. ut. 20 3,5 11 41.00

CL 98 238 Motor (MUP18 HJ) 25 3 9 25.00

CL 93 654 Motor YYS30-4-7B (MUP24 HE/HA/HG/HF) 30 8,3 9,5 37.00

CL 96 282 Motor FN35D (MUCS 24 15W 25W) 35 8 12 38.00

CL 96 263 Motor FN 25 D (MUP-24) U. INT. 35 7 9,5 36.00

CL 98 661 Motor (MUPR 24 HG) (FW-INV 6000) 35 4,5 11 25.00

CL 99 061 Motor 4 P. 2V. 82-2502 (MU-SINGLE) 35 2 9,5 44.00

CL 96 285 Motor FW48C (MUP-12-16-HN,MUC-12HN) 36 5,5 15 31.00

CL 98 255 Motor (MUP 24 HI) 40 9 10 27.00

CL 92 718 Motor YDK56-6 (MUCS 30-36-48HF) 50 8,5 18 72.00

CL 92 715 Motor YDK55-6 (MUCS 24HF) 55 5 16 61.00

CL 96 250 Motor (MUC 24-41 HNC) 75 19 11,4 59.00

CL 92 862 Motor (MUCSR 24 HF) 80 4,5 17 71.00

CL 92 716 Motor YSK80-4A (MU S/T 30-36HF) 80 18 13 85.00

CL 92 863 Motor (MUCSR 30 36 48 HF) 90 9 18 76.00

CL 97 278 Motor 806255JVA-A13S (MUC-30-36) 103 6 20 53.00

CL 92 393 Motor (MUC MUCR 60 HF2) 180 17 15,5 102.00

CL 97 627 Motor (MUCO 70 HG) 200 5,5 20 109.00

CL 91 229 Motor (ANE 203) 220 3 10 42.00

CL 91 224 Motor (ANE 322 CM) 230 6 9 60.00

CL 91 228 Motor (ANE 253) 230 3 10 44.00



nd


MOTORS FOR AIR SWINGCode Description Length

Eje (cm)Size

Ø (cm) €

MOTORS AIR SWING (12V)

CL 98 215 Motor swing (MUP 09 12 18 HI) 3,5 2,5 3.00CL 93 676 Motor swing (MUP 09-12 HE/HA/HG/HF) 1 2,5 13.00CL 93 677 Motor swing (MUP 18-24 HE/HA/HG/HF) 3 9 6.00CL 91 231 Motor swing (ANE 452-562-322) 0,8 9 14.00CL 96 267 Motor swing MP24GA(MUP-HN) 1 2,5 6.00CL 98 681 Motor swing (MUP 12 x 2 HG) 1 2,5 2.00CL 91 230 Motor swing (ANE 203-253) 0,8 2 12.00CL 98 510 Motor swing 28BYJ48A (MUR) 0,8 2,5 6.00CL 92 006 Motor swing conditioner window (MUV CN/HN) 1,3 5 4.00CL 98 256 Motor swing (MUP 24 HI) 1,5 3,5 5.00CL 95 200 Motor swing (MU S/T 14 18 24 HE) 0,9 3,5 1.00CL 96 268 Motor swing MP 24 EA (MUP-18-21) 0,9 2,5 7.00CL 91 212 Motor swing (ANE 632-712) 2,7 4,3 11.00CL 97 285 Motor swing (MU-S/T HN) 0,9 3,5 11.00CL 92 609 Motor swing (MUPR-12-HE/HEM) 0,8 2,8 4.00CL 92 765 Motor swing MP35EA7x1(MU S/T HF) 1,4 3,5 6.00CL 92 766 Motor swing MP35EA81x1(MU S/T HF) 0,7 3,5 6.00CL 96 251 Motor swing (MUCO 24-41-55 HN) 0,8 5 6.00CL 92 751 Motor swing (MUCS 18 HF) 0,9 3,5 4.00CL 92 511 Motor swing TYJ50-8 (MUV 12-18 HE) 1,3 5 6.00CL 92 752 Motor swing (MUCS 24-30-36-48HF) 1,3 3,5 8.00CL 92 963 Motor swing 24BYJ48A01(MUCS HG) (V1) 0,8 2,4 9.00CL 96 276 Motor swing (MUV-12) 1,5 6,5 4.00CL 96 277 Motor swing (MUV-18) 1,8 6,5 5.00CL 91 232 Motor swing 1,2 6 6.00CL 93 007 Motor swing conditionner (AM 37 ) 1,2 6,5 4.00CL 96 275 Motor swing (MUV-07-09) 1,2 6,5 5.00CL 95 105 Motor swing (MU S/T 28-36-42-52 HE) 1,5 6,5 4.00

ELECTRICAL TRANSFORMERSCode Item Voltage inlet and outlet €

CL 98 212 Transformer (MUP 9-12-18HI) E:220V S:12/4,75V 4.00CL 96 544 Transformer SC28B1(MUCS, MUPR, MUP 9+12) E: 220V S:13,7/9,8V 6.00CL 98 248 Transformer (MUP 12 18 HJ) E: 220V S:12/9V 7.00CL 93 876 Transformer TDB-8B (MUP HE/HA/HG/HF) E: 220V S:11,5V 12.00CL 96 543 Transformer SC 33C (MUR-12-HN) E: 220V S:13,5/8V 11.00CL 92 966 Transformer BYQ2-002 (MUCS HG) (V1) E: 220V S:10V 6.00CL 98 258 Transformer (MUP 24 HI) E: 220V S:12V 5.00CL 95 451 Outdoor transformer (MU S/T 24 28 42 HE) E: 220V S:12V 6.00CL 96 545 Transformer SC25A (MUCO 24-41-55 HN) E: 220V S:12,5/8,5V 6.00CL 95 450 Transformer (MU S/T HE) E: 220V S:13,7/11,5V 6.00CL 96 549 Transformer 48x26G U.I. (MUPR 11 N) E: 220V S:12,5/8,5V 20.00CL 98 679 Transformer (MUP- 12x2 HG/MUP-12 HK/UI19653) E: 220V S:11V 4.00CL 96 540 Transfor. SC21C-48x26G (MUP 07-09-12-16-24) E: 220V S:12,5/8,5V 13.00CL 92 060 Transformer mod. ES-48-682 (12V) (MUV-09-HN) E: 220V S:12V 13.00CL 93 875 Transformer TDB-6-B4 (MUP 09-12 HE/HA/HG/HF) E: 220V S:11V 13.00



nd


HF TUBE CUTTING TOOLS• Short pliers for capillary tube

Code Item €

HF 01 001 Mod. 94082 Scissors type with adjusted stop 6.50

• Hose cutter

Code Item €

MA 01 031 Hose cutter guillotine type 5.00

• Tube cutting tools for Refrigeration

Code Item €

MINIATURE TUBE CUTTER

HF 01 301HF 01 010

• In reduced size, ideal for working in areaswith a difficult access

• For tubes from 1/8” to 5/8” (from 4 to 15 mm.)Mod. RR-127Mod. TC-1050 “Imperial”

5.5015.80

MINI TUBE CUTTER

HF 01 002 Mod. RR-174 for tubes from 1/4" to 1-1/8"(from 6 to 28 mm.) 10.00

SMALL TUBE CUTTER

HF 01 004 Mod. 227-FA “Imperial” Small tube cutter for tubesfrom 1/8" to 3/4" (from 4 to 19 mm.) 19.50

TUBE CUTTER WITH REAMER

HF 01 303 Mod. RR-274For tubes from 1/8" to 1-1/8" (4 to 28 mm.) and reamer 12.50

HF 01 304 Mod. RR-312For tubes from 1/4" to 1-5/8" (7 to 41 mm.) and reamer 18.00

RESTRICTING PIPE CUTTER

HF 01 308HF 01 008

• Restricts from 1/8" to 1-1/8" (from 3 to 28 mm.)through cutting and bording wheel

Mod. RR-374Mod. TC-1020 “Imperial”

15.2041.50

HEAVY DUTY TUBE CUTTER

HF 01 005

HF 01 006

Mod. TC-1000 from 1/8" to 1-1/8" (3 to 28 mm.)with spare cutting wheel and reamer “Imperial”Mod. 312-FC from 1/4" to 1-5/8" (from 6 to 41 mm.) withspare cutting wheel and reamer “Imperial”

24.85

40.00

TUBE CUTTER WITH QUICK ADJUSTMENT

HF 01 003 Mod. 206-FB with retractile reamer from 3/8" to 2-5/8"(from 10 to 66 mm.) “Imperial” 69.00

HF 01 310 Mod. RR 206 for tubes from 1/5" to 2-1/2" 28.80

COPPER TUBE CUTTER WITH RATCHET SYSTEM

HF 01 021HF 01 022

Mod. RATCHET from 1/4" to 7/8" (6 to 23 mm)Mod. RATCHET from 5/16" to 1-1/8" (8 to 28 mm)

20.6024.50

SPARE BLADE FOR TUBE CUTTER “IMPERIAL”

HF 01 101HF 01 102HF 01 104

For models: 127-FB, 227-FA, TC-1050For models: 174-F, 312-FC, TC-1000 and TC 1020For models: 206-FB

3.005.609.35



nd


COOLCCOOOOLL

94082

RR-127

TC-1050

RR-174

227-FA

206-FB

Hosecutter

312-FC

RR-274

Ratchet

• Tube cutting tool for PVC, PE, PP, PVDF... tube

Code Item €

TUBE CUTTING Ø6-76 mm

MA 01 041MA 01 042

Tube cutter for plastic I (max. thickness 15 mm)Spare blade I

92.9016.80


MA 01 043MA 01 044

Tube cutter for plastic II (max. thickness 19 mm)Spare blade II-III

133.9024.50


MA 01 045MA 01 044

Tube cutter for plastic III (max. thickness 19 mm)Spare blade II-III

167.4024.50

• Saw for metals

Code Item €

MA 01 101

MA 01 110

Mod. MT 62003Arc saw with polyester handleSet of 5 carbon steel saw blades

6.204.10

• PVC, PE, PVDF cutting pipe pliers

Code Item €

MA 01 021 Mod. K-42 PVC cutting pipe plier up to 1-1/2”(42 mm), by zipper drive 6.50

MA 01 022 Mod. KS-63 PVC cutting pipe plier Ø 0-63 mm 44.50

• Cutting pipe scissors

Code Item €

MA 01 051MA 01 055

P-35 (Ø35) fast back to cut PVC pipes from 6 to 35 mmP-42 (Ø42) fast back to cut PVC pipes from 25 to 42 mm

30.1552.00

HF FLARING TOOLSCode Item €

HF 02 001 Mod. 525-F for tubes from 3/16" to 5/8" 56.50

FLARING AND EXPANDER TOOL CASE

HF 02 011 Mod. 275-FS Flaring and expander tools for tubesfrom 1/8" to 3/4" 105.00

FLARING TOOL AND EXPANDERWITH TUBE CUTTER SET

HF 02 012 Mod. 275-FSC Set equipped with flaring tool and275-FS expander from 1/8" to 3/4" and TC-1000 tubecutter from 1/8" to 1-1/8" 130.00

FLARING TOOL WITH TWO PINCH OFF TOOL

HF 02 013 Mod. 375-FS Set equipped with two pinch off toolsand a single bridge, supplied in a caseFor tubes from 1/8" to 3/4" 95.00

BEAT UP FLARING TOOL

HF 02 031 Mod. RR-193 Flaring punches. Case containing fourexpanders for 1/4", 3/8", 1/2" and 5/8" 8.00

BEAT UP FLARING TOOL

HF 02 035 Mod. RR-94 Punch for 1/2", 5/8", 7/8" 7.00



nd


KS-63

Ø 6-76 mm

Ø 50-140

275-FS

275-FSC

525-F

RR-193

RR-94

P-35P-42

K-42

HF FLARING TOOLSCode Item €

HF 02 061 Mod. RR-525 UniversalFlaring tool for tubes from 3/16" to 5/8" 30.00

SOFT FLARING TOOL

HF 02 081 Mod. RR-886AThe special eccentric cone revolution allowsthe internal opening of pipe without any effort,obtaining an accurate and regular flaring work.Use in pipes from 1/4" to 3/4" 98.20

FLARING TOOL WITH CONE

HF 02 021 Mod. RR-500 It guarantees the maintenance of thick-ness through rotational methods on pipe in any flaringwork from 3/16" to 5/8" 38.50

HF 02 063 Mod. RR-N195 It guarantees the thickness maintenan-ce by means of rotational methods on pipe in any fla-ring work from 3/16" to 3/4" 60.75

PAWL FLARING TOOL

HF 02 069 Mod. RR-810AAsymmetric handle (pawl) easy to use. Shock absor-bing plastic case. For use in pipes from 3/16" to 3/4" 75.00

FLARING AND EXPANDER TOOLS

HF 02 065 Mod. RR-N276Combination of flaring and expander tool for pipes from3/16" to 3/4" in plastic shock absorbing case 75.00

COMBINATION OF FLARINGAND EXPANDER TOOLS 45°

HF 02 068 Mod. RR-275Flaring and expander tools for tubes from 1/8" to 3/4" 56.00

FLARING AND CUTTING TUBE TOOL CASE

HF 02 071 Mod. RR-1226L• Flaring tool for tubes from 3/16" to 5/8" withtwo pinch off tool

• Tube cutter RR-274 (1/8" to 1-1/8") 55.00

COMPLETE CASE “SUPER”

HF 02 073 Mod. RR-278L• Flaring and expander tools for tubes from 1/8" to3/4" with two pinch off tool

• Tube cutter RR-274 (1/8" to 1-1/8")• Ratchet wrench RR-122 75.00

COMPLETE CASE “BASIC”

HF 02 075 Mod. RR-121• Flaring tools for tubes from 1/8" to 3/4" of

two pinch off tool• Springs kit 1/4", 3/8" and 1/2"• Tube cutter RR-274 (1/8" to 1-1/8")• Ratched wrench RR-122 70.00



nd


RR-886A

RR-N195

RR-275RR-N276

RR-121

RR-525

RR-278L

RR-1226L

RR-810A

RR-500

HF ELECTRIC FLARING TOOLCode Item €

ELECTRIC FLARING TOOL

HF 02 301 Mod. RF 20N• Eccentric electric conical flaring tool• The copper clamped tube is fixed through a limit thatsupresses irregularities in the area flared by the tube• The eccentric cone progresses with a rotarymovement to push and extend gradually the interiordiameter of the copper tube

300.00

Characteritics:• Weight with battery: 1,710 Kg• Dimensions with battery: 122 x 67,5 x 274 mm• Time to charge the battery: 60 min.• Tension charge: 220 V (50/60 Hz)• Power: 60 VA• Distance minimum wall: 45 mm

Includes:• Battery charger• Assembly 5 clamps: 1/4" - 3/8" - 1/2" - 5/8" - 3/4"• Case to protect from impacts• Tool to cut tube• Spare battery

REAMERSCode Item €

HF 02 201HF 02 202

• One single piece wheel for reamers both insideand outside edges of copper tubes from 3 mm.Internal Ø 40 mm. 1/8" to 1-1/2"

Mod. RR-208 Plastic bodyMod. RR-209 Metal body

6.509.50

HIGH CAPACITY

HF 02 222HF 02 223

• Cylinder to ream exterior and interior of tubes ofcopper, brass, steel, plastic Ø10 to 54 mm 1/2" to 2-1/8"Mod. REG 10-54Mod. REG 10-54E electric switch with screwers(revolutions ≤ 300/minute)

67.15

117.50

POCKET REAMERSCode Item €

POCKET REAMER

HF 02 211HF 02 213HF 02 212

Mod. RT 100 Plastic handle and steel reamerSpare steel reamer RT100Mod. RT 300 Plastic handle with pen type subjectionand carbon steel reamers, which cannot be replaced

8.502.00

6.00



nd


Brackets

Pinch off tool

HF EXPANDING TOOLSCode Item €

EXPANDING TOOL CASE FOR REFRIGERATION

HF 02 102 Mod. RR-100• 1 Expanding plier RR-100H• 6 Expanding heads: 3/8", 1/2", 5/8", 3/4", 7/8" and 1• 1 Reamer RR-208 240.00

HYDRAULIC EXPANDING TOOLSCode Item €

SET EXPANDING TOOLS

HF 02 105 Mod. BT300• 1 Hydraulic expanding pliers• 7 Expanding heads: 3/8", 1/2", 5/8", 3/4", 7/8", 1" & 1-1/8"• Tube cutter 1/4" to 1-5/8"• 1 Reamer 3/16" to 1-1/2"• Case 275.00

TUBE BENDING TOOLS• Refrigeration tube benders ❆

Code Item €

MULTIPLE TUBE BENDERHF 03 211 Mod. RR-368 for copper tubes; it allows to make bends of

90° in tubes of 1/4", 5/16" and 3/8" 17.00HF 03 212 Mod. RR-368 de 180°. Identical to model RR-368. but

allows to make bends of up to 180° 23.00HF 03 215 Mod. RR-369 for copper tubes; it allows to make bends

of 90° in tubes of 1/4", 3/8", 1/2" and 5/8" 28.00TUBE BENDER

HF 03 201HF 03 203HF 03 204HF 03 205HF 03 206HF 03 207

RR 364-04 1/4"RR 364-06 3/8"RR 364-08 1/2"RR 364-10 5/8"RR 364-12 3/4"RR 364-22 7/8"

19.5024.0026.5036.6045.0055.00

• Spring Type tube bending toolsCode Item €

HF 03 041HF 03 047HF 03 048HF 03 049HF 03 050HF 03 051HF 03 052

Springs kit for copper tubes of 3/8", 1/2", 5/8"Spring 1/4”Spring 3/8”Spring 1/2”Spring 5/8”Spring 3/4”Spring 7/8”

4.601.251.602.002.103.003.50

Code Item €

MULTIPLE TUBE BENDERHF 03 001 Mod. 368-FH for copper tubes; it allows to make

bends of 90° and 180° in tubes of 1/4", 5/16" and 3/8" 32.50TUBE BENDER “SPECIAL SPLITS”

HF 03 002 Mod. 370-FH for copper tubesspecial for splits of 1/4", 3/8" and 1/2" 75.00

TUBE BENDER MOD. 364-FH

HF 03 011HF 03 012HF 03 013HF 03 014

To bend annealed copper tubes, it allows to makebends of 90° and 180°:Mod. 364-FH 3/8"Mod. 364-FH 1/2"Mod. 364-FH 5/8"Mod. 364-FH 3/4"

67.0082.00

124.00140.00



nd


RR-100

3 1in

RR-368

RR-368180°

RR-364

HF TUBE BENDING TOOLSCode Item €

HYDRAULIC TUBE BENDER WITH BATTERY

Case with tube bending tools, 5 forms and4 counterforms• Weight with battery: 2.9 Kg• 12V 2A battery• 230V battery charger• Battery charges in 50 minutes

HF 03 361 OB85/SBForms: 3/8", 1/2", 5/8", 3/4" and 7/8"Counterforms: 14. 17. 18 and 22 710.00

PORTABLE TUBE BENDER FOR MULTIPLE DIAMETERS

Case with tube bending tools, 7 forms and3 counterforms• Capacity:

Annealed copper tube up to Ø22 and 1.5 mmCoated copper tube up to Ø18 and 1 mmCoated aluminium tube up to Ø26 and 3 mm

• Total weight: 5 kg

HF 03 301 P 22 A (REFRIGERATION tube)Forms: 1/4", 5/6", 3/8", 1/2", 5/8", 3/4" and 7/8"Counterforms: 1/4" to 3/8", 3/8" to 5/8" and 3/4" to 7/8" 265.00

MA 03 211 P 22 A (WATER tube)Forms: 10. 12. 14. 16. 18. 20 and 22Counterforms: 10 to 12. 14 to 17 and 18 to 22 265.00

HYDRAULIC TUBE BENDING AND FLARING TOOL

Case with hydraulic tube bender,7 forms and 3 counterforms• Capacity:

Annealed copper tube up to Ø22 and 1.5 mmCoated copper tube up to Ø18 and 1 mmCoated aluminium tube up to Ø32 and 3 mm

• Flaring tool system with 7 flaring punch• Total weight: 11 kg

HF 03 305 OB/KIT (REFRIGERATION tube)Forms: 1/4", 5/6", 3/8", 1/2", 5/8", 3/4" and 7/8"Counterforms: 1/4" a 3/8", 3/8" to 5/8" and 3/4" to 7/8"Flaring punch: 1/4", 5/6", 3/8", ½", 5/8", 3/4" and 7/8" 820.00

MA 03 215 OB/KIT (WATER tube)Forms: 10. 12. 14. 16. 18. 20 and 22Counterforms: 10 to 12. 14 to 17 and 18 to 22Flaring punch: 10. 12. 14. 16. 18. 20 and 22 820.00

PORTABLE TUBE BENDER,TUBE CUTTER AND REAMER

HF 03 311 Mod. RR-707I (REFRIGERATION tube)Complete set of:• Rack type tube bender

Forms: 3/8", 1/2", 5/8", 3/4" and 7/8"Counterforms: 3/8" to 1/2" and 5/8", 3/4", 7/8"

• Metal reamer• Tube cutter from 1/8" to 1-1/8" (4 to 28 mm) 115.00

PORTABLE ELECTRIC BENDING TOOL

HF 03 320 Mod. ROBEND 3000 COLDPlastic case containing:• Robend 3000 bending tool• Shoes, forms 1/2", 5/8", 3/4",7/8" & 1-1/8" and shoe shaft• Bending of copper, mild steel, stainless steel. 1,546.00

HF 03 325HF 03 350

AccessoriesForm + 1" ShoeRemovable tripod

185.00108.95

TUBE BENDER RECORD 32 "FRÍO"

HF 03 341 Plastic case with:• Electric tube bender Record 32 750W• Matrix 3/8" - 1/2" - 5/8" - 3/4" - 7/8"• Allows bending copper tubes, multilayer, sweet steel 550.00



nd


RECORD 32 + Matrix

HF SERVICE TOOLS• Spanners

Code Item €

RATCHET SPANNER BELZER

HF 04 101 Mod. R-6950-MReverser on an end with double square,1/4" and5/16" with spring for a change of turn direction ofthe spanner.Three fixed squares of 5/16", 3/8" and 1/2"

80.00

RATCHET SPANNER SERVICE VALVES

HF 04 105 Mod. RR-122With turn direction reversing device on both extremes,with squares for 3/16" and 1/4", 1/2" and 9/16" 4.40

HF 04 103

HF 04 104

HF 04 106

Mod. RR-123 LWith turn direction reversing device on both extremes withsquares 3/16" and 1/4" and hexagonal for 1/2" and 9/16"Mod. 124CThe same as mod. RR-123 L but Imperial USA trademarkMod. 127CWith turn direction reversing device on both extremes withsquares for 3/16", 1/4", 5/16" and 3/8" “Imperial”

7.80

44.00

14.15

DOUBLE-ENDED SPANNER SET

HF 04 111 • Chrome - vanadium• Chromed head DIN 3110• 8 pieces 6 - 7 to 20 - 22 15.60

STAR SPANNER SET

HF 04 121 • Chrome - vanadium• Chromed head• Elbowed DIN 838• 8 pieces 6 - 7 to 20 - 22 17.90

ALLEN SPANNER KIT

HF 04 131 • Forged steel• Chromed head DIN 3110• 8 pieces 2 - 3 - 4 - 5 - 6 - 7 - 8 - 10 2.86

TUBE SPANNER SET

HF 04 141 • Forged steel• DIN 896• 8 pieces 6 - 7 to 20 - 22 75.20

SOCKET SPANNER SET AND BITS

HF 04 152 • 22 Sockets-Bit 1/4"• 13 socket spanners 1/4": 4 - 4.5 - 5.5 - 6 - 7 - 8 - 9 -10 - 11 - 12 - 13 - 14 mm (5/32" - 9/16")

• 2 Extensions 1/4", 50 - 10 mm• 1 Spanner 1/4"• 1 Rotating handle• 1 Universal articulation 1/4"• 1 Sliding bar 1/4"• 3 Hexagonal spanners (ALLEN)• 1 Flexible extension• 1 Case 50.00



nd


• Spanners

Code Item €

COMPLETE CASE “100 PIECES”

MA 04 191 • CHROME-VANADIUM quality• Water pump plier• Glass spanner set• Fix spanner set• Screwdrivers• Universal pliers• Extra crimper pliers• Allen spanners kit• Hammer 40.00

ADJUSTABLE SPANNERS

HF 04 161HF 04 162HF 04 163HF 04 164HF 04 165HF 04 166

• Forged steel• DIN 3117Size 6"Size 8"Size 10"Size 12"Size 15"Size 18"

3.954.656.509.75

19.7532.70

STILLSON SPANNER

MA 04 182MA 04 183MA 04 184MA 04 185MA 04 186

Stillson spanner of 10"Stillson spanner of 12"Stillson spanner of 14"Stillson spanner of 18"Stillson spanner of 24"

6.257.559.30

16.9530.95

• Torque wrenches setCode Item €

COMPLETE CASE R410A

HF 04 110 Supplied with torque wrench with exchangeable headsfor diameters 17-22-24-26-27 and 29 mm 43.00

• PliersCode Item €

PLIERS TO PRESS COPPER TUBE

HF 04 001 Mod. VISEGRIP - RR «ORIGINAL» 32.00HF 04 002 Mod. MT00322

• With forged pinch off tool• Size 10" GRIP 6.55

UNIVERSAL PLIERS

HF 04 005HF 04 007

• Chrome head• Acetate handleSize 6"Size 8"

3.854.95

DIAGONAL SIDE CUTTING NIPPERS

HF 04 012

• Chrome head• Acetate handleSize 160 mm. 8.05

CRIMPER PLIERS

HF 04 015Pliers for the shutting of crimpersMod. SUPER 5.25

STRIPER PLIERS

HF 04 016 • For cables from 0.5 to 6 mm• With cutter 6.90

WATER PUMP PLIER WITH RACK

HF 04 026

• Forged steel• Acetate handleSize 240 mm. 13.95

• Pliers for gas circuitCode Item €

TUBE PERFORATOR

HF 04 035 Ref. AV 7 Tube perforator for charging ordischarging, 7/16 UNF (1/4" SAE) 57.00



nd


• Belt with toolholder bag

Code Item €

HF 04 415 Simple toolholder bag. Ref. MT 26120Includes the belt 9.90

HF 04 409 Double toolholder bag. Ref. MT 26240Includes the belt 17.85

• Tool case

Code Item €

ALUMINIUM

HF 04 401

HF 04 402

• Dimensions: 457 x 330 x 152• Includes a banderole for hanging• Compartment with adjustable divisions• Toolholder plateMod. ALUMINIUM• Weight 3.9 Kg.Mod. PVC/ALUMINIUM• Weight 3.3 Kg.

38.00

40.00

PLASTIC

HF 04 403HF 04 404HF 04 405HF 04 406HF 04 408HF 04 407HF 04 411

• For protection and transport of control elementsand tools

Mod. 170/30 (320 x 290 x 114 blue)Mod. 170/30 (320 x 290 x 114 red)Mod. 170/38 (390 x 295 x 95 blue)Mod. 170/42 (423 x 315 x 110 blue)Mod. 170/42 (423 x 315 x 110 red)Mod. 170/51 (510 x 400 x 130 blue)Mod. 170/36 (365 x 255 x 72 black)

7.807.809.60

13.5513.5518.758.10

VERTICAL CASE

HF 04 431

• Vertical opening• Dimensions: 420 x 245 x 190 mm• It contains double side trays for tools• Black colourMod. VGA 6201 85.00

• SUPER case toolholder

Code Item €

HF 04 434HF 04 435

• Small case of polypropylene• Internal dimensions: 325x460x170 mmMod. 170/48 H184 with foamMod. 170/48 H184 PU complete with:• Tray for documents• 2 Toolholder trays• Trays for small materials

29.00

142.00

• Tool case with trolley

Code Item €

HF 04 419 • Case 455 x 340 x 185 mmWith 2 trays and transport trolley 88.00



nd


MAKEYOUROWNSET

170/48 H184 PU

• Tool Metal Case

Code Item €

HF 04 438

HF 04 439

• Plate painted in blue• Round handle3 C model (3 compartments)

Dimensions: 400 x 200 x 160 mm5 C model (5 compartments)

Dimensions: 430 x 200 x 210 mm

23.50

27.70

• Case for vacuum pump and tools

Code Item €

HF 04 428 Mod. 159 BLU• Case 338 x 287 x 515 of polypropylene with tray• Blue colour with handle and clasps 36.50

• Calibrated gauges

Code Item €

CALIBRATED GAUGES SET CAPILLARY TUBES

HF 04 501 20 callibrated gauges for checking capillary tubes(0.45-1.5 mm.) inner Ø 20.40

HF 04 502 16 callibrated gauges for checking capillary tubes(1.5-3 mm) inner Ø 20.40

• Fin comb

Code Item €

FIN COMB «RR-351»

HF 04 201

• Steps of 8. 9. 10. 12. 14. 15 fins/inch• Steps of 3.16. 2.82. 2.54. 2.12. 1.81. 1.7 mm.6 Fin combs 8.40

UNIVERSAL FIN COMB «RR-352»

HF 04 211 • Spring-steel threads• Suitable to all the steps 6.50

• Service tools

Code Item €

SCREWDRIVER SET 7 PARTS

HF 04 229• Insulation 1000V4 Screwdrivers flat nib 3-4-5.5 AND 6.52 Screwdrivers crossed nib PH1 and PH21 Pole searcher 37.50

VOLTAGE TESTER

HF 04 251HF 04 252

Voltage tester long. 60 mmVoltage tester long. 100 mm

1.602.25



nd


HF CLEANING EQUIPMENTS FOR REFRIGERATION CIRCUITS• Cleaning equipment with «NITROGEN»

Code Item €

LIM-N01 MODEL

HF 05 010 Cart with 2 wheels and a handle as a support with:• Nitrogen cylinder 7 Kg (200 bar/1.4 m3)• 3 m Hose with adapters• Complete regulator with gauges, inlet 200 Kg

and outlet 6 bar 476.00

N02 TIGHTNESS MODEL

HF 05 009 Cart with 2 wheels and a handle as a support with:• Nitrogen cylinder 7 Kg (200 bar/1.4 m3)• 3 m Hose with reinforced raccords• Complete regulator with gauges, inlet 200 Kg

and outlet 45 bar 585.00

TIGHTNESS TEST KIT FOR STANDARD BOTTLES

HF 05 050 Includes:• Nitrogen regulator 1/4" SAE- Output accuracy: 0.5 ± 50 bars• Includes installation test kit• Flexible tube 1/4" SAE 2.5 meters• Adapter 5/16" SAE-f x 1/4" SAE-male for

installation connections R410A• Plastic case 300.00

TEST AND PRESSURE LEAK KIT

HF 05 052 Includes:• Disposable nitrogen cylinder 1 Kg

(100 litres/110 bar)• Pressure regulator 220/50 bar• Joints 1/4"• Adapter 5/16" H to 1/4" M SAE• Adapter for bottle• External safety valve• Manometer Ø80 Type 1 260.00

ACCESSORIES

HF 05 015HF 05 025HF 05 040HF 05 041HF 05 042HF 05 019HF 05 016HF 05 031

HF 05 026

HF 05 027

HF 05 014

Complete regulator of 15 bar (cleaning 6 bar)Complete regulator of 50 bar (for tightness)Complete regulator of 40 bar (for tightness)Complete regulator of 55 bar (for tightness)"HARRIS"Complete regulator of 60 bar (for tightness)Hose 5 mts. with coupling adapterHose 3 mts. with coupling adapterHose 3 mts. with shielded coupling adapter (tightness)for Harris regulator and cleaning 6 barHose 3 mts. reinforced with gate valve forregulator 45 barHose 3 mts. with 1/4" SAE adapters for Harris regulator55 barCart with 2 wheels spare part

68.00185.00160.00192.00190.00

1.6035.50

31.20

41.10

31.2056.50

BOTTLES

HF 05 011HF 05 013

Cylinder of nitrogen of 7 litres (200 bar/1.4 m3)Cylinder of nitrogen of 11 litres “Rollerflam” (200 bar/2.1 m3)

423.00518.00

LOADING OF CYLINDERS

HF 05 021HF 05 023

Loading 7 litres (200 bar/1.4 m3)Loading 11 litres “Rollerflam” (200 bar/2.1 m3)

54.0069.00

Note: The first cylinder must be bought by the user and loadings willbe made in exchange for empty cylinder



nd


LIM-NO1

Regulator15 Kg

Regulator40 Kg

Nitrogen Nitrogen spare part

HF CLEANING EQUIPMENT WITH NITROGEN/ FLUSHCode Item €

PORTABLE EQUIPMENT K 747 PLUS

HF 05 111

• Allows to clean the air conditioning system in acontinuous cycle

• It can be used in every installation with the possibilityof making flow the flush clean liquid with the sameworking pressure

• Dimensions 290 x 290 x 480 mm• Weight: 12 Kgs.

Portable equipment K 747 Plus 805.00

PORTABLE EQUIPMENT K 747

HF 05 101

• User friendly and practical equipment for airconditioning system cleaning

• Working pressure 10 bar. Can remove the impuritiesdeeply, oil, etc. of the refrigeration circuit

• Equipped with hose, spray gun and empty tank forflush liquid

Portable equipment K 747 210.00

SPARE PARTS

HF 05 125 Nitrogen throw-away bottle1kg. (100 litres / 110 bar) 28.50

HF 05 121 Bottle containing cleaning liquid SCSet includes:• Cleaning throw-away empty bottle• Connection valves• Pressure hose of 600 mm• Spray gun 92.00

HF 05 128 Pressure reducer 10 bar with manometer for Nitrogendisposable bottle 81.00

CLEANING EQUIPMENTCode Item €

MODEL WKL - 301

HF 05 001 Designed for cleaning of refrigeration systemswith R-141b, specially used in case of burnt motor ofthe compressor, moisture or before the starting of anew installation.Flow: 300 l/h, pressure: up to 12 KgWeight: 17 kg 510.00



nd


Pressure reducer

Nitrogendisposable

bottle

K 747

SC

K 747 Plus

HF FLUSHING SYSTEMS• FLUSH Models - Cleaning with nitrogen

Code Item €

Features:• Flow rate 840 l/h,• Max. pressure: 0.45 MPa• Power 0.6 Kw (230V)• Supply: 230-240V. 50/60 Hz• Working temp.: 0 to 50°C• Connection for universal hose• 10 lt. reservoir• Dimensions: 300x200x550 mm• Mechanical filter on the suction side• It removes all solid residues caused by the breakage

of the compressor or the filter• It removes completely any oil residue from HVAC and

A/C systems• Suitable for non-flammable flushing fluids.

FLUSH 1 PLUS HVAC

HF 05 002 Flush 1 Plus HVAC 860.00

FLUSH & DRY HVAC

HF 05 004 Flush & Dry HVAC. For sweeping the installation afterflushing 975.00

GF CLEANING EQUIPMENTS FOR REFRIGERATION SYSTEMSSolkal 14B1 is a grease removal made by highly refined paraffin compounds. It does notcontain any aromatic substances, nor chlorine nor HCFC. Especially created to evaporatequickly without leaving any residue. High volatility (evaporation rate 20 referred to the eth-ylic ether 1). Residue-free: based on an especially selected paraffin solvent mixture.Applications: eliminating dirt, oil, grease and resin. Especially suitable for the cleaning ofengines, tools, industrial equipment, etc.

Code Item €

SOLKAL 14B1

GF 01 006 SOLKAL 14B1 16,5 kg Container 175.00

ECOCLEAN® is a technical dissolvent specially developed for the cleaning of refrigerationand air conditioning systems. Also suitable for electrical appliances, motors and metalcomponents in general. NON-FLAMMABLE, non-aggressive to metals and with a higherdielectrical rigidity than conventional systems. To be used pure (as supplied) in sweeping,impregnating, rubbing, pulverizing or dipping operations. A sweep with dry nitrogen helpsremoving it from the system.

Code Item €

ECOCLEAN

GF 01 004 ECOCLEAN 20 Kg Container 292.40

SUPER FLUSH is an internal cleaner for coils, batteries, etc. Ideal for the cleaning ofsystems with a burnt compressor. Compatible with all type of oils and refrigerants.It eliminates acid.

Code Item €

SUPER FLUSH CLEANER

HF 18 205HF 18 206

Can of 0.9 lCan of 3.8 l

19.0068.50

HF 05 126HF 05 127

1 litre TR FG1 Flush cleaner5 litre Flush cleaner

13.2060.00



nd


Flush 5 lt.

Flush 1 lt.

IDEAL

CHANGE

OF GAS

HF VACUUM PUMPSCode Model Power CV Flow m3/h €

SUPERLIGHT WITHOUT OIL

HF 06 107 • One stage• Dimensions: 195x65x130 mm• Weight: ONLY 1.5 KgPump BE-1NSL 60 W 2.05 90.00

ONE STAGE

HF 06 105 Pump BE-1 NVacuum 75 micron 0.1 mbarOil capacity 400 ml.Weight 8.2 kg 1/5 CV 2.45 125.00

TWO STAGES


HF 06 108 Pump BE-5 NVacuum 15 micron 0.02 mbarOil capacity 450 ml.Weight 12 kg 1/3 CV 7.9 250.00


TWO STAGES FOR R410A

HF 06 126 Pump BE-2-VVSame as BE-2N also including pressure gauge andsolenoide valve for R410A 250.00

ACCESORIES

HF 06 128

HF 06 127HF 06 129

Kit solenoid valve and vacuumeterand reductions 1/4",3/8" and 5/16"Reduction H 1/4" SAE x M 5/16"Spare vacuumeter

50.003.50

12.00

HF 04 428 Case mod. 159 BLU• Polypropylene case 338 x 287 x 515 with tray• Blue color with handle and clasps 36.50

VACUUM PUMPSCode Model Power CV Flow m3/h €

TWO STAGES

HF 06 113HF 06 135

Pump 2F-3Pump 2F-10

1/41/2

2.98.8

354.00438.00

OILS FOR VACUUM PUMPSCode Item €

MINERAL OIL

HF 06 131• Especially indicated for all kinds of vacuum pumps“Robinair”, “Telstar”, “Wigam”, “ST”, etc. Bottle 1 lt. 8.40

SYNTHETIC OIL

HF 06 133

• Special for vacuum pumps used withR134a, R404. R407c, etc.

1 lt. bottle 16.30



nd


Telstar2F-3

BE-2-VV

BE-1N / BE-2N

BE-1NSL

Case 159 BLU

Kit solenoid valveand vacuumeter

HF MANIFOLDSCode Model €

MANIFOLD R22 - R134a - R404A - R407C

HF 06 223HF 06 224

Mod. RR 110• Gauges Ø80• 1 ValveGauge HIGHGauge LOW

15.0015.00

HF 06 200 Mod. RR 130• Gauge HIGH and LOW Ø 63• 2 Valves 30.00

HF 06 204 Mod. RR 140• Gauge HIGH and LOW• 4 Valves• 3 plug 1/4" and 1 vacuum plug 3/8" 45.00

HF 06 209 Mod. RR-2005• Gauge HIGH and LOW of Ø63• Vacuum gauges in Mbar of Ø 100• 5 Valves 112.20

HF 06 201 Mod. RR 130/New gases (spare units)• 2 Gauges HIGH and LOW• 2 Valves 35.00

HF 06 206 Mod. RR 140/New gases (spare units)• 2 Gauges HIGH and LOW• 4 Valves• 3 plug 1/4" and 1 vacuum plug 3/8" 50.00

HF 06 225 Mod. RR 130/410A• Gauges HIGH and LOW Ø63• 2 Valves 42.50

HF 06 205 Mod. RR 140/410A• Gauges HIGH and LOW Ø63• 4 Valves 57.50

2 WAY DIGITAL MANIFOLD PRESSURE ANDTEMPERATURE DISPLAY

HF 06 270 Mod. 2010S• Display shows pressure and temperature ofrefrigerant gases• Refrigerants: R22. R134a, R404A, R407C,

R410A, R422D, R427A y R507• Selectable temperature (°C or °F)• Selectable pressure units (bar, PSI, Kg/cm2. MPa)• Power supply: SOLAR cells• Accuracy: ±1% 240.00

SLIDE RULE

HF 06 161 Slide rule to determine the equivalent pressure andgas temperature 8.00

SPARE VALVES FOR MANIFOLDS

HF 06 266HF 06 267HF 06 210HF 06 221

Valve control RR of LOW blueValve control RR of HIGH redValve control ST/RR of HIGH redValve control ST/RR of LOW blue

6.006.009.149.14

HF 06 291HF 06 292HF 06 293HF 06 294HF 06 269

Manifold valve joint ST/RRJoint PTFE Ø16.85 x 22.3 x 1 STBrass joint Ø20.3 x 23.85 x 1 STJoint PTFE Ø23.85 x 1 blind STTransparent joint Ø23.85 x 0.3 blind STRubber joint R130/110

1.501.501.501.502.00

HF 04 403 Manifold case (320x290x114. blue) 7.80



nd


RR 130

RR 110

2010S

RR 140

HF MANIFOLD CASESCode Model €

MANIFOLD CASES

HF 06 255

HF 06 215

Mod. ESC 2000/3. The case contains:• Manifold 2 valves R22. R134a, R404A and R407C• A set of hoses 1.500 mm. 1/4" teflon joint• Gauges HIGH and LOW Ø 80Mod. ESC 2000/4. same as the former plus• Manifold 4 valves• Vacuum plug 3/8"

60.00

90.00

HF 06 216

HF 06 217

Mod. ESC 2000/5. The case contains:• Manifold 2 valves R22. R427A, R417 and R422D• A set of 3 hoses 1.500 mm. 1/4" teflon joint• Gauges HIGH and LOWMod. ESC 2000/6. same as the former plus• Manifold 4 valves• Vacuum plug 3/8"

70.00

100.00

HF 06 257

HF 06 259

Mod. ESC 2000/3-410. set contains:• Two valve analyser for R410a• Three hose set 1.500 mm, 5/16" connection• H 1/4" SAE x M 5/16" reductionMod. ESC 2000/4-410A, same as the former plus• Manifold 4 valves R410A• Vacuum plug 3/4"

78.00

108.00

MANIFOLD CASEALL TYPE OF GASES

HF 06 261 Mod. ESC 2011/2 DPlastic case 435 x 310 x 110 mm. It contains:• Digital analyser 2010S with pressure displayand temperature for all gases (R22, R134a,R404A, R407C, R410A, R422D, R427A, R507...

• Hoses (3) 1500 mm long 1/4"• Hoses (3) 1500 mm long 5/16" 265.00

COMPLETE ANTISHOCK MANIFOLD CASE

HF 06 285 Mod. VMG-2-R410A• Manifold 2 ways• Gases R410A, R407C, R22 and R134a• Contains hose with ball valve• Thread1/4" SAE - 1/4" Yellow, Red, Blue• Thread 1/4" SAE - 5/16" Red, Yellow• Length 1.500 mm• Gauge Ø80 with antishock protection 84.55

HF 06 286 Mod. VMG-2-134a• Manifold 2 ways• Gas R134a, R22, R404A and R407C• Contains hose with ball valve• Thread 1/4" - 1/4" SAE Yellow, Red, Blue• Length 1.500 mm• Gauge Ø80 with antishocj protection 64.55

GAUGES R600a, R134a AND R403bCode Item €

• PULSE FREE system• High (red): Measuring range -1 to 9 Bar• Low (blue): Measuring range -1 to 3 Bar

1/8" NPT VERTICAL ENTRY

HF 06 445HF 06 446

High pressure Ø80Low pressure Ø80

18.7018.70

* Gauges for R-22. R-12 and R502 in stock (while supplies last)



nd


HF GAUGES FOR R22. R134a, R404A, R407C AND R410ACode Item €

FOR R22. R134a, R404A and R407C1/8" NPT VERTICAL ENTRY

HF 06 263HF 06 262

• High (red): measuring range -1 to 35 bar• Low (blue): measuring range -1 to 15 barHigh pressure Ø 63Low pressure Ø 63

7.007.00

HF 06 489HF 06 490

High pressure Ø 80Low pressure Ø 80

9.839.83

HF 06 479HF 06 480

High pressure Ø 63 glycerinLow pressure Ø 63 glycerin

12.9612.96

1/8" NPT VERTICAL ENTRY

HF 06 411HF 06 412

• High (red): measuring range -1 a 35 Bar• Low (blue): measuring range -1 a 15 BarHigh pressure Ø 63Low pressure Ø 63

8.508.50

FOR R134a and R404A - 1/8" NPT VERTICAL ENTRY

HF 06 471HF 06 472

• High (red): Measuring range 0 to 31 Bar• Low (blue): Measuring range 0 to 8 BarHigh pressure Ø 63Low pressure Ø 63

5.005.00

FOR R22. R134a, R404A and R407C1/8" NPT REAR INTAKE

HF 06 433HF 06 434

• With rear flangeLow pressure Ø 63 glycerinHigh pressure Ø 63 glycerin

14.0614.06

FOR R410A - 1/8" NPT VERTICAL ENTRY

HF 06 483HF 06 484

• High (red): measuring range -1 to 35 bar• Low (blue): measuring range -1 to 15 barHigh pressure Ø 63Low pressure Ø 63

8.508.50

HF 06 481HF 06 482

• High (red): measuring range -1 a 38 Bar• Low (blue): measuring range -1 a 53 BarHigh pressure Ø 80 glycerinLow pressure Ø 80 glycerin

37.3537.35

HF 06 485HF 06 486

High pressure Ø 80Low pressure Ø 80

10.5010.50

GLYCERINE GAUGE TYPE 1Code Item €

FOR R22 - R134a - R404A - R407C

HF 06 420HF 06 421HF 06 422HF 06 423

• Thread 1/8" NPT • Diameter 60 mmHigh pressure 1 to 30 bar radialLow pressure 1 to 10 bar radialHigh pressure 1 to 30 bar rear entryLow pressure 1 to 10 bar rear entry

40.0040.0040.0040.00

FOR R410A

HF 06 425HF 06 426HF 06 427HF 06 428

High pressure 1 to 40 bar radialLow pressure 1 to 20 bar radialHigh pressure 1 to 40 bar rear entryLow pressure 1 to 20 bar rear entry

44.5043.2044.5043.20

VACUUM GAUGECode Item €

HF 06 451HF 06 452HF 06 129HF 06 453

• Measuring range - 1000 to 0 mbar• Thread 1/8" NPTØ 80 mmVertical entry Ø 80 mmRear entry Ø 80 mmRear entry Ø 50 mmAnalyser 1 valve RR-110V with vertical gauge Ø80 mm

20.0025.2412,0030.70



nd


Back model

Radial model

BLONDELLE

HF SHUT OFF VALVE FOR GAUGESCode Item €

HF 06 450 Shut off valve for gauges thread: 1/4" SAEmale-1/8" NPT female Mod. M2-264 22.50

RUBBER PROTECTORCode Item €

HF 06 491HF 06 492HF 06 493HF 06 494HF 06 222

Blue Ø 63Red Ø 63Blue Ø 80Red Ø 80Double protector Ø 63

2.602.603.753.755.25

DIGITAL GAUGE/THERMOMETERCode Item €

SOLAR DIGITAL GAUGE (PRESSURE ANDTEMPERATURE) MOD. TITAN

HF 06 462HF 06 463

• Gauge for all refrigerants: R22. R134a,R404A, R407C, R410A, R422D, R427A and R507

• Accuracy: ±1%• Range: PSI - °F

PSI - °Cbar - °CMPa - °C

• Connection 1/8" NPT• Supply: SOLAR cellsSolar gauge: High pressure mode (RED)Solar gauge: Low pressure mode (BLUE)

100.00100.00

VACUUM ELECTRONIC GAUGECode Item €

VACUUM GAUGE VG100A

HF 06 601 • Range from 1 atm to 25 microns• Reading through 9 leds light• Includes hook and connection 1/4"• Operation during 25 hours with battery of 9V 230.00

DIGITAL VACUUM GAUGE VG200

HF 06 602 • Selection measures: inches, mbar or micron• LCD Screen of 5 digits• Operation during 30 hours with battery of 9V 310.00

DIGITAL VACUUM GAUGECode Item €

VACUUM GAUGE «VA116»

HF 06 604 • LCD Screen of 4 digits• Connection 1/4" SAE• Operation during 25 hours with battery of 9V 140.00

CASE WITH VACUUM GAUGE KIT «VA116 KIT»

HF 06 605 Includes:• Metallic case 360 x 280 x 75 mm• Digital vacuum gauge VA116• Vacuum hose 1500 mm• Reduction 1/4 H. a 3/8 M. with valve core• Analyser 1 way• Spare battery 9V 185.00



nd


Double protector

VG100A

VG200

High Low

HF 06 604

HF 06 605

HF CHARGING HOSESCode Item €

HOSE R-22. R404A AND R-407C

HF 06 322HF 06 323HF 06 324HF 06 326HF 06 305

• TEFLON joint• Connection 1/4" SAE• RED (High pressure)• BLUE (Low pressure)• YELLOW (Charging or vacuum)Set of 3 pipes 900 mm.Set of 3 pipes 1.500 mm.Set of 3 pipes 2.000 mm.Set of 3 pipes 2.500 mm.Hose for vacuum 1.500 mm. 3/8"

16.5019.0033.0038.0018.50

HF 06 353HF 06 354

• With closing valveSet of 3 pipes 900 mmSet of 3 pipes 1.500 mm

23.5026.00

HOSE R-410A

HF 06 325HF 06 327

HF 06 127

Set of 3 pipes 1.500 mm. connection 5/16"x1/4"Set of 3 pipes 1.500 mm. connection 5/16"x5/16"with intermediate valveH 1/4" SAE x M 5/16" reduction

39.40

60.503.50

SPECIAL HOSE R-134a

HF 06 341HF 06 342

Set of 3 pipes 900 mm.Set of 3 pipes 1.500 mm.

24.0026.50

SPECIAL HOSE FOR ALL KIND OFREFRIGERANTS WITH BALL VALVE

HF 06 372HF 06 374

• Joint of 1/4" SAE 45° x 1/4" SAESet of 3 pipes 900 mm.Set of 3 pipes 1.500 mm.

65.4078.00

SPARE PARTS

HF 06 317HF 06 318HF 06 319HF 06 320HF 06 331HF 06 332HF 06 333HF 06 336

Joint for charging hose 1/4" TEFLONJoint for hose 1/4"Joint for hose 5/16"Joint for hose 3/8"Depressor for 1/4" charging hoses, threaded (fig. 1)Depressor for 1/4" copper tube (fig. 3)Depressor for 1/4" charging hose by pressure (fig. 2)Kit of spare hoses(includes 3 TEFLON joints and 1 depressor)(fig. 4)

0.620.350.580.650.501.600.80

2.35

QUICK JOINTSCode Item €

QUICK JOINTS

HF 06 029HF 06 030

• Quick joint for adapting 1/4" SAE hoses to 1/2"ACME (R-134A)R - 9134 B Low joint straightR - 9134 A High joint straight

16.0016.00

HF 06 033HF 06 034

• Quick joint for adapting 1/4" SAE hoses to 1/2"ACME (R-134A)R - 9134S - B ACME Low joint 1/2" squareR - 9134S - A ACME High joint 1/2" square

19.6019.60

HF 06 023HF 06 024

•Quick connection adjustable square:AV134-B6 3/8" SAE blue male (low)AV134-R6 3/8" SAE red male (high)

66.7066.70

HF 06 025HF 06 026

•Quick connection straight:AVS134-B6 3/8" SAE blue male (low)AVS134-R6 3/8" SAE red male (high)

43.0043.00

HF 06 027• Quick connection SHUT-OFFConnection 1/4" SAE male 21.00

QUICK JOINTS R410A

HF 06 028HF 06 346HF 06 345HF 06 347

Connection 5/16" SAE maleStraight connector 1/4" SAE-H turning x 5/16" SAE-MStraight connector 5/16" SAE-H turning x 1/4" SAE-MStraight connector 5/16" SAE-H and 1/4" SAE-M

21.0011.008.905.00



nd


fig. 1 fig. 3fig. 2

fig. 4

1/4" SAE a 1/2" ACME

1/2" ACME

3/8" SAE square3/8" SAE straight

Shut-Off 1/4" SAEturning

5/16"-1/4"SAE straight

HF TOOL CASES FOR REFRIGERATIONENGINEERS

Code Item €

HF 06 232 Equipped with:• 1 DIGITAL clamp-on metre

(scale 600 Amp., voltage supply 200-600V c.a.,resistance 20MΩ -2000MΩ)

• 1 Digital thermometer with sounding(scale -50 to 260°C)

• 1 Electronic leak detector RD99 withprogressive luminous and acoustic alarm ofconcentration (all gases HFC, HCFC, CFC)

• 1 Portable welding kit• 1 Set of charging hoses 900 mm• 1 Two-valve manifold with Ø63 gauges R22.

R-134A, R-404A and R-407C for HIGH and LOWpressure and a hook

• 1 Mini tube cutter RR-127 (1/8" to 5/8")• 1 Tube cutter RR-274 (1/8" to 1-1/8")• 1 Flaring and swanning tools RR-275

from 1/8" to 3/4"• 1 Aluminium case of 457 x 330 x 162 mm• 1 Compartment for tools 325.00

TOOLS FOR REFRIGERATION



• 1 Set of charging hoses 900 mm• 1 Two-valve manifold with Ø63 gauges R22.

R-134A, R-404A and R-407C for HIGH and LOWpressure and a hook

• 1 Electronic leak detector RD99with progressive luminous and acoustic alarm ofconcentration (all gases HFC, HCFC, CFC)

• 1 PVC case of 423 x 315 x 110 mm 220.00

BASIC «SE-2B»

HF 06 231 SE-2B, equipped with:• Two-valve manifold with Ø63 gauges R22. R-134A,R-404A and R-407C for HIGH and LOW pressure

• Set of 3 hoses 900 mm• Metal rearmer• Service mirror Ø40• Tube cutter 1/8" to 5/8" RR 127• Tube cutter 1/8" to 1-1/8" RR 274• Flaring tool RR 525• Ratched wrench service valves• Adjustable wrench of 10" 120.00



nd


R-22, R-134A,

R-404A, R-407C

FOR GASES

HF TOOL CASES FORREFRIGERATION ENGINEERS

Code Item €

COMPLETE «STE»



• 1 Digital thermometer with sounding(scale -50 to 260°C)

• 1 Electronic leak detector RD99 withprogressive luminous and acoustic alarm ofconcentration (all gases HFC, HCFC, CFC)

• 1 Portable welding kit• 1 Set of charging hoses 900 mm with a teflon joint• 1 Two-valve manifold with Ø63 gauges R410A,

reduction H 1/4" SAE x M 5/16"for HIGH and LOW pressure and a hook

• 1 Mini tube cutter RR-127 (1/8" to 5/8")• 1 Tube cutter RR-274 (1/8" to 1-1/8")• 1 Flaring and swanning tools RR-275

from 1/8" to 3/4"• 1 Aluminium case of 457 x 330 x 162 mm• 1 Compartment for tools 345.00

TOOLS FOR REFRIGERATION



• 1 Set of charging hoses 900 mm with a teflon joint• 1 Two-valve manifold with Ø63 gauges R410A,

reduction H 1/4" SAE x M 5/16"for HIGH and LOW pressure and a hook

• 1 Electronic leak detector RD99with progressive luminous and acoustic alarm ofconcentration (all gases HFC, HCFC, CFC)

• 1 PVC case of 423 x 315 x 110 mm 240.00

BASIC «SE-2B»

HF 06 234 SE-2B, equipped with:• Two-valve manifold with Ø63 gauges R410A,reduction H 1/4" SAE x M 5/16"for HIGH and LOW pressure

• Set of 3 hoses 900 mm with a teflon joint• Metal reamer• Service mirror Ø40• Tube cutter 1/8" to 5/8" RR 127• Tube cutter 1/8" to 1-1/8" RR 274• Flaring tool RR 525• Ratched wrench service valves• Adjustable wrench of 10" 140.00

MANIFOLD CASE R-22-R407C-R410ACode Item €

COMPLET

HF 06 240 Set of:• 2 valve manifold with Ø63 gauges (1/4" SAE)• 2 valve manifold with Ø63 gauges (5/16" SAE) R410A• Set of 3 hoses 1500 mm (1/4" SAE)• Set of 3 hoses 1500 mm (5/16" SAE) R410A• Flaring/ swanning tool 275L• Tube cutter RR 127• Tube cutter RR 274• Metal reamer RR 209• Ratched wrench RR 122• Digital Thermometer mod. SA-880 255.00



nd


R410A

HF CASE FOR INSTALLERSCode Item €

INSTALLER BASIC AIR

HF 06 281 Mod. SE-B.I.A.-407cIt contains:• Metallic aluminium case 395x275x115• 1 Analyzer 2 ways for R22, R134a, R407c

and R404A• 1 set of pipes 1/4" length. 1500 mm• 1 metallic reamer• 1 wrench 300x33• 3 reducers with a joint• 1 pipe cutter 1/8" to 1-1/8" CT-274• 1 flaring tool 3/16" a 5/8" CT-525F• 1 ratchet spanner 1/4" a 9/16" 100.00

HF 06 282 Mod. SE-B.I.A-410ASame as previous with Analyzer and Pipes for R410A

110.00

PORTABLE GAUGE TESTERCode Item €

PORTABLE GAUGE TESTER

Gauge with gun handle for air conditioning installationsto check the charge and eventually to add refrigerant inthe system.

HF 06 418HF 06 419

CLIMATEST R407CCLIMATEST R410A

80.3580.35

2-WAY DIGITAL MANIFOLD

Code Item €

• 50 refrigerants, incl. R410A• Class 1.0• High/Low pressure and temperature measurable• Superheat & Subcool operation• Vacuum indicator• Protected LCD screen• Easy to read, illuminated display• Updates reading every 3 seconds• Automatic calibration• Sturdy housing• Unique housing• Auto shut-off• Battery level indicator• Refrigerant updates possible

Technical Data:• Accuracy: ≤1%• Units: bar / psi / kPa / Mpa• Temperature: °C / °F• Vacuum measurementes: mbar / Micron• Working temperature: -20°C to +50°C

-4°F to +122°F• Battery: 9V

HF 06 271 DIGIMON 2-way digital manifold with case 305.00



nd


Outsidetemperature sensor

Mbar / micrón

Bar / psi / kPa / MPa

°C / °F

Superheat andsubcool control

DIGIMON with case

HF ELECTRONIC ANALYSER

Code Item €

• Designed for the maintenance and repair of refrige-rating, air conditioning and heat pump systems

• Set of 2-way brass valves• Measurement of intake and discharge pressure

(range: -1...39 bar) with their respective evaporatingand condensing temperatures

• Vacuum indicator• 30 refrigerants• Two NTC temperature inputs for calculating super-

heat and subcooling• Automatic mode detection refrigerating/heating• Maximum, minimum and average values• Leak test• Integrated rubber protection• Dimensions: 200 x 113 x 62 mm• Weight: 1060 gr.• Batteries: 4 x LR06Includes:• Batteries• Clamp probe for temperature measurements

Ø6-35 mm -40 to 125°C• Nylon transport bag• Calibration protocol

HF 06 245 TESTO 550-1(includes transport bag) 344.89

OPTIONAL ACCESSORIES

HF 06 253 Clamp probe for temperature measurements Ø6-35 mm-40 to 125°C (necessary for calculating superheat andsubcooling) 57.13

HF 06 250 Transport case for manifold and accessories 100.57

ANALYZER COOLING TESTO 570-2Code Item €

• Measures temperature and vacuum• Measures pressure and intensity and subcooling withoptional probes

• Measures simultaneous overheating and subcooling• Sealing test with temperature balance• Measures COP/EER for water cooling• Regsters and prints values up to 72 hours• 40 refrigerants memorised, 100% upgradeable• MIN-MAX-PROMEDIO screen• Test of leakages• Dimensions: 280x135x75 mm• Weight: 1.200 gr.

HF 06 246 TESTO 570-2Contains:• 2 uts teperature probe peg Ø6.35 mm -40/+125°C• Software EASY KOOL c/ cable USB• Charger and batteries• Measurement protocol• Transport case 950.00

OPTIONAL ACCESORIES

IM 11 447HF 06 241HF 06 242

Infrared printer TESTOProbe peg (intensity) 0 -20/200A cable 2.90 m.Pressure probe oil 0 -15 bar cable 2.90 m.

256.32206.22299.85



nd


Carrying case

Clamp probe

SondasPrinter

TESTO 570-2

HF DIGITAL MANIFOLDCode Item €

Mod. FOX-100

HF 06 275 • 4-way piston manifold (Low, High, Ref, Vac)• Database with more than 45 refrigerants

(CFC, HCFC, HFC...)• 1 ambient temperature probe• 2 probes K-type (range: -99.9 ÷ 200°C),

2 pressure transducers (range: -0.99 ÷ +48.90 bar)• Max. working pressure: 56 bar• Accuracy better than 1%• In case of non azeotropic refrigerant selection of liquid

or vapor• Vacuum measurement in both working sides (0.01 bar)• Auto power off• 9V battery• For all K-type probes• Plastic case• 2 probes TK109Model FOX-100

275.00

Mod. FOX-EVO

HF 06 278 • Mismas características que el modelo FOX-100 yademás incorpora un VACUÓMETRO electrónico DataLogger/Registro de Datos mediante tarjeta de memoriaMicro SD y entrada para conexión de balanzaBÁSCULA EVO de capacidad 100 kg. 498.00

HF 06 279 Báscula EVO con capacidad de 100 kg para trabajar conFOX-EVO 222.00

ELECTRONIC VACCUM AND CHARGING STATIONCode Item €

HF 06 521

Electronic vacuum and charging station can performvacuum and charge processes for air conditioning unitswith all current refrigerants. Easy to install with display forerror free and safe work. The vacuum process isautomatically monitored. The charge process is similarlycontrolled and monitored in an automatic mode.Use for all common vacuum pumps and 1 kg-2.5 kgrefrigerant bottles, up to 50 kg for charging.• Weight: 8.5 Kg.• Scale: up to 50 Kg with 10 g resolutionRoklima Compact station with accessories 610.00

CHARGE ELECTRONIC INDICATOR UNITCode Item €

HF 06 499 TIF 4000A• With led bubble indicators• Optimises refrigerant charge for maximum cooling• Operates on any metal tubing• Checks for refrigerant floodback• Operates through use of ultrasonics• Detects starved operators• Maximises evaporator capacity• Helps in adjusting thermostatic expansion valves• Useful on expansion valves and capillary tube systems• Transducer clamps 1/8" to 1-1/4 830.00

CHARGING CYLINDERCode Item €

FOR R22. R134a, R407C, R404A GASES

HF 06 078

• Cylinder with protection and handle• Includes safety valve to avoid overpressure and

ball valves 1/4" SAEMod. K2M/A6 2 kg 225.00



nd


FOX-EVO

FOX-100

Báscula EVO

GASES

R22

• R134A

R401A • R404A • R

407C

FO

HF DIGITAL CHARGING SCALESCode Item €

PROGRAMABLEDIGITAL SCALE «CPS»

HF 06 498 CC 800A

• Allows to preselect the quantity forautomatic charge

• Outlet for accessories• Capacity: 100 Kg• Resolution: 10 gr.• Weight: 3.9 Kg• Charge memory works in case the cylinder

empties before the charge is completed• Solenoid compatible with all gases 510.00

DIGITAL SCALE«CPS»

HF 06 495 CC 220

• Allows to measure accurately the passingof the tank refrigerant

• Capacity: 100 Kg• Resolution: ± 10 gr.• Weight: 2.55 Kg• Accuracy: ± 0.15% from the value• 9 volt alkaline battery 225.00

DIGITAL SCALE

HF 06 513 SCALE SE100-10

• For the accurate measuring of refrigerants• Capacity: 100 Kg• Resolution: ± 10 gr• Weight: 3.10 Kg• 9 volt alkaline battery 125.00

DIGITAL SCALE

HF 06 514 SCALE SE100-10-

• Allows to refill refrigerant• Refill programmer. It includes alarm for end of pro-gramme.• Capacity: 100 Kg• Resolution: ± 10 gr• Weight: 2.74 Kg• 5x9 volt alkaline battery

250.00

SCALE FOR SMALL BOTTLES

HF 06 505 BM 500C

• Digital scale for bottles of 1kg and 2kg• Capacity: 5 Kg.• Resolution: 1 gr. up to 1 Kg

2 gr. > 1 Kg• Power supply through battery 36.00



nd


Load

Maximum

100 Kg

Load

Maximum

5 Kg

Load

Maximum

100 Kg

Load

Maximum

100 Kg

HF 06 513HF 06 514

HF PORTABLE RECOVERY AND REFILL EQUIPMENTSCode Item €

• Compatible with all CFC, HCFC and HFC refrigerants,including R404A, R407C and R410A mixtures

Mod. CM2000

HF 06 576 • Recovery16.8 Kg/h steam phase120 Kg/h liquid phase385 Kg/h Push-Pull phase

• Max. working pressure: 38 bar• Power supply: 220V 50Hz• Compressor 1/2 CV• Dimensions: 480 x 220 x 370 mm• Weight: 17 Kg.• With folding handle and rollers 620,00

Mod. RW125

HF 06 561 • Recuperación13,8 Kg/h fase vapor94,20 Kg/h fase líquido278 Kg/h fase Push-Pull

• Potencia: 1/2CV• Dimensiones: 500 x 220 x 340 mm• Peso: 12 Kg. 495,00

RECOVERY AND REFILL EQUIPMENTS "OIL FREE"Code Item €


Mod. MINIMAX-E

HF 06 574 • Recovery17 Kg/h steam phase50 Kg/h liquid phase240 Kg/h Push-Pull phase

• Max. using temperature: 38.5 bar• Power: 380 W• Weight: 10.5 Kg. 720.00

RECOVERY AND RECYCLING EQUIPMENTSCode Item €


Mod. EASY REC120R100

HF 06 582 • Recovery16 Kg/h steam phase

110 Kg/h liquid phase220 Kg/h Push-Pull phase

• Max. using temperature: 38.5 bar• Power: 380 W• Distillation system with flow regulation allows the

complete separation of oil and refrigerant. 1,315.00

RECYCLING KITCode Item €

Mod. CLK-1

HF 06 577 • Can be used with any recovering machine and withall refrigerants, including R-410A

• Specially designed to clean and recycle refrigerantOn-Site

• Removes dirt, moisture and 95% of the oil fromrefrigerant and permits measurement of removed oil

• Includes moisture sightglass and 1/4" turn shut offvalve

• Dimensions: 320x270x80 mm• Weight: 1.75 Kg 264.00



nd


FULFILSISO 11650

NF EN35421

CE N.1005/2009

FOLDING

HANDLE

ROLLERS

HF AUTOGENOUS-WELDING EQUIPMENTSCode Item €

COMPLETE EQUIPMENTS

HF 07 001 MINI OXI-BUTANE EQUIPMENT• Pressure reducer with gauges• Camping key• Camping cylinder GLP 0.5 Kg.• Cylinder O2 400 l. (small)• Complete torch S-194-C• Check valves O2

• Bichromate cart• Double pipe 3 m• Total weight 10 Kg. 280.00

HF 07 003 PORTABLE OXI-BUTANE EQUIPMENT (2.8)• Camping key• Camping cylinder 2.8 Kg.• Oxyflam 1.1 m3 Oxygen Cylinder• Complete torch S-194-C• Check valves O2

• Pressure reducer with gauges• Bichromate cart with wheels• Double pipe of 3 m• Total weight 20 Kg. 420.00

HF 07 004 PORTABLE OXI-BUTANE EQUIPMENT (2.8)• Identical to the previous one but with hose of 5 m. 429.00

HF 07 005 PORTABLE OXYACETYLENE EQUIPMENT• Acetylene cylinder 0.7 Kg.• Oxyflam 1.1 m3 Oxygen Cylinder• Complete torch S-194-C• Check valves• Oxygen and acetylene regulator with gauges• Bichromate cart with wheels• Double pipe of 3 m• Total weight 29 Kg. 800.00

OXYGEN CYLINDERS AND CHARGES

HF 07 101HF 07 102HF 07 151HF 07 152HF 07 153HF 07 154HF 07 155HF 07 156HF 07 160HF 07 159

Camping cylinder 0.5 Kg.Camping cylinder 2.8 Kg.Oxygen cylinder 400 lt. (2 lt.x200 bar) flat baseOxygen cylinder charge 400 lt. 0.4 m3 (2 lt.x200 bar)Oxyflam Oxygen cylinder 1.1 m3 (5 lt.x200 bar) flat baseOxyflam Oxygen cylinder charge 1.1 m3 (5 lt.x200 bar)Aluminium Oxygen cylinder 1.5 m3 (7 lt.x200 bar) flat baseAluminium Oxygen cylinder charge 1.5 m3 (7 lt.x 200 bar)Oxygen cylinder 2.5 l.Oxygen cylinder charge 2.5 l.

43.4055.60

189.0029.00

220.0039.65

423.0062.30

191.0037.31

COMPLETE BOTTLE ALbee

HF 07 171HF 07 172HF 07 173HF 07 174

• Hand reducer included• Free maintenance for bottles• Flowmeter integratedOxygen bottle B-5Oxygen charge 1.1 m³ (5l x 200bar)Oxygen bottle B-11Oxygen charge 2.3 m³ (11l x 200bar)

335.0039.70

670.0065.40



nd


Bottles provided withTULIPA protection

2850°C

2850°C

3500°C

Ergonomic Quick coupling Quick openingand closing

Adjustable Permanentcontrol

HF AUTOGENOUS-WELDING EQUIPMENTSCode Item €

ACETYLENE CYLINDERS AND CHARGES

HF 07 161HF 07 124

Oxyflam Acetylene cylinder 0.8 Kg. (5 lt.x17 bar) flat baseOxyflam Acetylene cylinder charge 0.8 Kg. (5 lt.x17 bar)

* Acetylene charges only in main branch offices

425.0095.40

COMPLETE BOTTLE ALbee

HF 07 165HF 07 166

• Hand reducer included• Free maintenance for bottlesBottle Acetylene B5Charge Acetylene

560.0095.40

ACCESSORIES AND TORCH

HF 07 201HF 07 202HF 07 203HF 07 204HF 07 205HF 07 208HF 07 209

Complete torch S-194-CHandle Mod. S-194Mixer Mod. SH-194Burner-holder handle Mod. SD-50Cutter accessory Mod. S-362Sparker SA-2656 Stones case SA-26L

49.0042.2515.9013.0079.002.922.35

BURNER-HOLDERS

HF 07 216HF 07 217HF 07 218HF 07 219HF 07 220HF 07 221HF 07 213HF 07 210HF 07 211HF 07 212

Solding burner-holder GLP No. 2 N (1 mm) HS2PSolding burner-holder GLP No. 4 N (2 mm) HS4PSolding burner-holder GLP No. 6 N (4 mm) HS6PAcetylene solding burner-holder No. 1 N (1 mm) HS1AAcetylene solding burner-holder No. 3 N (2 mm) HS3AAcetylene solding burner-holder No. 5 N (4 mm) HS5AHeating burner-holder GLP HSHPAcetylene heating burner-holder HSHACutting burner-holder GLP (6 mm)Acetylene cutting burner-holder (6 mm)

3.803.803.803.803.803.80

25.0025.0025.0025.00

CHECK VALVE

HF 07 241HF 07 242

Check valve Oxygen Mod. S-88-OCheck valve Acetylene Mod. S-88-A

11.0011.00



nd


SA-265

Burner holder

194-B

S-194

S-88-O

S-88-A

S-36

194-B 194 P/A S-194

S-88-A

S-88-O

S-194-C

CompleteBottleALbee

Acetylenecylinder

• Accessories for autogenous-welding equipment

Code Item €

ACCESSORIES

HF 07 111HF 07 112

Cart for Mini Oxi-Butane equipmentCart for Portable Oxi-Butane equipment

43.6869.20

HF 07 199 Welding protection glasses 4.95HF 07 222HF 07 223HF 07 224HF 07 225HF 07 226HF 07 227

Set of double Oxi-Butane hose of 3 mSet of double Oxi-Butane hose of 5 mSet of double Oxi-Butane hose of 10 mSet of Oxi-Acetylene hose of 3 mSet of Oxi-Acetylene hose of 5 mSet of Oxi-Acetylene hose of 10 m

30.0039.0066.0028.0037.0060.00

HF 07 231HF 07 232HF 07 234

Oxygen pressure regulator S-101-OAcetylene pressure regulator S-101-ARegulator spare membrane

56.7056.7012.00

HF 07 251HF 07 252HF 07 253HF 07 261

Set of burner rubber coupling OxygenSet of burner rubber coupling AcetyleneSet of burner 21.8 left of Ø 5 mm.Valve blue camping butane

2.902.904.85

11.95HF 07 265HF 07 264HF 07 266HF 07 267

Oxygen gauge 0 to 16 bar/psiOxygen gauge 0 to 315 bar/psiOxygen/Acetylene gauge 0 to 2.5 bar/psiOxygen gauge 0 to 40 bar/psi

6.256.257.907.90

HF 07 291HF 07 292HF 07 293HF 07 294

Oxygen gauge 0 to 16 bar/psi Ø50 1/4"Oxygen gauge 0 to 315 bar/psi Ø50 1/4"Acetylene gauge 0 to 2.5 bar/psi Ø50 1/4"Acetylene gauge 0 to 40 bar/psi Ø50 1/4"

6.256.257.907.90

• Manual welding equipments

Code Item €

AUTOGENOUS WELDING EQUIPMENT

HF 07 268

HF 07 269HF 07 270HF 07 280

Mod. TURBO SET 90With non refillable bottle OXYGEN110 cylinders,MAXIGAS cartridge, MIGNON oxygen pressure redu-cer, gas tap with a check valve, grip with regulationtaps and burnerSpare oxygen charge 110 barCartridge of gas MAXIGAS 400Spare welding noozle

180.0028.008.307.30

• Welding equipments with disposable bottle

Code Item €

WELDING EQUIPMENT

HF 07 273

HF 07 274

Mod. RE "Metálico"Trigger start ignitionSafety buttonMod. RETorch with flame adjustment control and trigger startignition

50.00

36.00REPLACEMENT BOTTLES

HF 07 277 Metil acetylene propane disposable charge according toCE standardsBox of 12 bottles

20.0012.50/ut

• Bernzomatic welding case

Code Item €

HF 07 275 Bernzomatic casewith: blowlamp TS 700

2 Mapp gas bottles 130.00

HF 07 276 Esco Mapp casewith: blowlamp RE "Metálico"

2 Mapp gas bottles 90.00



nd


Bernzomatic

mod. REMetálico

mod. RE

Esco Mapp

33005500°°CC

• Sticks for welding

Code Model Mettinginterval

%Silver Stick Ø Content €

Packing

HF 07 301HF 07 303HF 07 305HF 07 307HF 07 308HF 07 351HF 07 352HF 07 353HF 07 354

MRP 8MRA 2MRA 5MRA 15MRA 15MRP 25(*)MRP 25(*)MRP 34(*)MRP 34(*)

710-750°C645-800°C645-810°C645-790°C645-790°C

2%5%

15%15%25%25%34%34%

2 mm2 mm2 mm2 mm2 mm2 mm2 mm2 mm2 mm

500 gr500 gr500 gr500 gr250 gr500 gr250 gr500 gr250 gr

Checkwebsite

for updatedprices

APPLICATIONS:Types MRP 8, MRA 2, MRA 5 and MRA 15: COPPER - COPPER without dioxidizing

COPPER - BRASS with dioxidizingType MRP 25: COPPER - COPPER tube BUNDYType MRP 34: COPPER - COPPER tube BUNDY - STAINLESS STEEL

• Flux coated sticks for welding

Code Model Mettinginterval % Silver Stick Ø Content €

Packing

HF 07 381HF 07 382HF 07 383HF 07 384

MR 25 FCMR 25 FCMR 34 FCMR 34 FC

25%25%34%34%

2 mm2 mm2 mm2 mm

500 gr250 gr500 gr250 gr

Checkwebsite

for updatedpricesHF 07 340 BLOCKADE (Cu 7 Sn 7 Ni). Similar applications as MR 5

and MR 15, with similar mechanical characteristics andeven easier application

• Reel string- welding aluminium-copper

Code Item €

SILVAL ZnAlAg4

HF 07 318HF 07 319

• Low fusion temperature 440°-470°• Welds aluminium-aluminium/ aluminium-copper/

aluminium-brass• 200° below fusion temperature• With paint-stripperReel SILVAL ZnAlAg4 100gr. x 2mmReel SILVAL ZnAlAg4 50gr. x 2mm

Checkwebsite

for updatedprices

• Rust-removing

Code Item Content €

HF 07 320HF 07 321HF 07 322

• Suitable for copper, ironing andnot ironing metallic alloyages

• Activity temperature: 500 to 800°CFORTEX (Powder)FORTEX (Powder)MF CP (Paste)

100 gr.250 gr.500 gr.

3.005.72

11.70

• Aluminium welding kitCode Item €

WELDING KIT

HF 07 325 • Paint stripper and welding for aluminium kit• For the welding of aluminium-aluminium

and copper-aluminium 37.60

• Leak seal stick in evaporatorsCode Item €

HEAT SEAL STIK

HF 07 365• By providing material. Do not heat directly.Epoxy sealer stick 31.80

• Pocket welding unitCode Item €

HF 07 296 Mod. MULTIUSO (gas refillable)• Including 2 torches (all purposes) 20.50



nd


TypeMULTIUSO

(*) Rod WITHOUTCADMIUM according tothe European Standard

• Welding unit for plumbing

Code Item €

WELDING UNIT WITH MULTIGAS BOTTLE

HF 07 297 Mod. EUROSET. Disposable welding torch. Multiple ap-plications. Working temp. 730°C. Including disposablebottle multigas 300 (600 ml.) and burner Ø22 mm. 38.85

HF 07 299 Disposable bottle Multigas 300. Mixture 40% propaneand 60% butane. 600 ml. For Euroset 6.85

• Cleaning and protection

Code Item €

THERMOPROTECTING BLANKET

HF 07 278 THERMIC SHIELD• Dimensions: 200 x 270 mm.• Material: Aluminium-ceramic cardboard

without asbestos.• Flexible.Supplied in 3 units pack

8.306.00/pc

THERMIC BLANKET

HF 07 279 • Dimensions: 330 x 200 mm• It withstands direct fire without burning only on one

side (do not heat the aluminium side)• It withstands temperatures up to 1.000°C 31.80

CLEANING SANDPAPER IN ROLLS

HF 07 331HF 07 332

Industrial roll 25 m x 38 mm G-60Industrial roll 25 m x 38 mm G-80

31.4031.40

CLEANING STEELWOOL BAG

HF 07 335 Cleaning steelwool with 10 units 3.70

• Protection against heat transmission

Code Item €

ANTI-CALORIC PASTE

HF 07 361

• Stops the heat or flame during the welding, protectingthe valves or parts sensitive to heatTHERMAL BLOCK• Tube of 312 gr.

18.80

• Cool Gel

Code Item €

AIR FIRE

HF 07 372

• Scatterthe heat and prevents heat damageto components during soldering

1 litre spray 16.10

• Tin electric welding gun

Code Item €

SOLDERING GUN CASE

HF 07 401 • Welding gun case• 100 W power• 230 V voltage 16.00



nd


Thermic blanket

AIR FIRE

Thermal Block

Cleaning sandpaper

Steelwool

Thermal Shield

EUROSET

Tin electricwelding

gun

HF LEAK DETECTOR OF REFRIGERANT GAS• Manual

Code Item €

BUTANE GAS DETECTOR

HF 08 011HF 08 013

• The leak causes visible change of colour fromblue into green of the flame

16840 model complete with chargePropane charge

69.4011.85

“CONTROL-GAS” LEAK DETECTOR

MA 10 211

• If there is a leak, bubbles will form up• Not flammableSpray of 400 mlBox with 24 “CONTROL-GAS” sprays

5.654.30/pc

TRAX “Liquid Leak Detector”

HF 18 071HF 18 072

• Long life bubble-type liquid leak detectorwith tray

• It detect losses up to 1 micron• It evaporates without residues38 ml bottle380 ml bottle with extensible pick

3.206.00

HIGH SENSIBILITY LEAK DETECTOR• With hot platinum diodes

Code Item €

TEK-MATE MODEL

HF 08 141 • Refrigerants: CFC, HCFC and HCF• Sensor durability: 100 hours• Sensitivity (EN 14624) 1-2 gr/year• Sensitivity (SAEJ 1627) 11 gram/year• Autonomy ±16 hours• Power supply: alcaline batteries• Automatic restart• Audible signal with variable intensity and lighting led 345.00

HF 08 142HF 08 143HF 08 155

Spare PartsFilters kitSpare sensorEarphones for use in noisy enviroment

28.4083.7038.90

HF 08 135 • Refrigerants: all CFC, HCFC and HCF• 3 adjustable levels of sensitivity• Certificates: EN 16424. SAE J-2791.

SAE J-1627 and CE 842/2006• Sensitivity: 1.5 gr/year• Indicates state of batteries• Sensor durability: >300 hours• Instantaneous response time• Power: 4 alkaline batteries• Sensor length: 43 cm 295.00

HF 08 136 • For all halogen gases• Sensitivity: 3 gr/year• In compliance with norm SAE J-1627• Indicates state of batteries• Sensor durability: ±30 hours• Immediate response time• Power: 2 alkaline batteries• Sensor length: 30 cm 203.00

HF 08 137Accessory:Spare sensor 40.00



nd


16840

TRAX

ControlGas

TEK-MATE

ELD-H

EXPLORER

HF REFRIGERANT LEAK DETECTORS• With ultrasonic sensor

Code Item €

HF 08 171

HF 08 175

• Detects refrigerant leaks, gas, compressed airvacuum.

• Operating temperature range: 0°C to +50°C.• Weight: 250gr.• Alcalines 9V battery.• Storage case.• Detects ultrasound at 40.5 kHzAccesories:Transmitter for Whisper

454.00

229.00

• Universal leak detectorCode Item €

HF 08 145 DF-01• Seven levels of sensitivity• Acoustic and light signal• Sensitivity 3 g/ for all gas refrigerants

(R410A, R407C, R22. R404A, R507. R134A, ...)• Metal sensor• Contains: Case, 1 spare filter, batteries 126.00

HF 08 146 Spare sensor (20 hours operation) 20.00

• Spare sensor

Code Item €

HF 08 118 Maintenance kit S-135 (for L 780 A and L 790 B) CPS 33.90

INTERNAL LEAK DETECTOR• Internal detector

Code Item €

HF 18 221HF 18 222

HF 18 224HF 18 225

• Bright red dye stain type leak detector forrefrigeration and air conditioning systemsFluorescent with any ultraviolet light source

• Introduce with injector gradually• Aprox, dose 8.3 l detector / 1 kg. gasTRACE (mineral oils)116 ml plastic bottle460 ml plastic bottleTRACE 2 (ester base oils)• Universal for all types refrigerant gases

including CFC's, HFC's and HCFC's116 ml plastic bottle460 ml plastic bottle

13.2027.20

10.1531.60

• Internal leak detector for systems with waterCode Item €

HF 18 251HF 18 252

• Can locate hard to find leaks in any closed systemcontaining water and/or antifreeze compounds(such as ethylene or propylene glycol)• Chemically inert• Leaks show as bright red stains (bright orange glowwhen exposed to ultraviolet light source)HYDRO TRACE Bottle 460 mlHYDRO TRACE Container 3.8 litres

12.6660.02

• Dye cleanerCode Item €

HF 18 226 DYE WASH cleaner removes any type of leak detecting dyefrom equipments and pipe surfaces to prevent false readingduring future and follow-up leak detection. 15.50



nd


SUITABLE FOR

REFRIGERANTSALL

®DETECTOR INTERNO DE

FUGAS DE REFRIGERANTE

HYDRO

2®

DETECTOR INTERNO DEFUGAS DE REFRIGERANTE

DF-01

WHISPER

HF ULTRAVIOLET LEAK DETECTORS• Refrigeration

Code Item €

SPECTROLINE “REFRIGERATION” CASE

HF 08 405 Mod. OPK-100 BEZ, supplied with:• Carrying case, glasses and cleaning spray• OPTIMAX lamp wireless (6 hours operation)• Rechargeable battery + charger• BIG-JET injector system (head, hose and

32 doses ester oil) 465.92

HF 08 406 Lamp for OPTIMAX with charger and glasses 235.00

BIG-JET SYSTEM FOR OPK

HF 08 426HF 08 427HF 08 423HF 08 424

• Does not need gauges or bottle of refrigerant• Easier dosage• One capsule has got up to 32 doses• Dosage:- Up to 2.2 kg gas 1 Adjustment (is equivalent to GS-1)- Up to 4.5 kg gas 2 Adjustments (is equivalent to GS-2)- Up to 11 kg gas 4 Adjustments (is equivalent to GS-3)- 1 Adjustment every 2 litres of oilBEZ-400 Complete kit mineral Big-Jet oilBEZ-400/E Complete kit Big-Jet ster oilBEZ-4 32 doses capsule BIG-JET ster oilBEZ-4/E 32 doses capsule BIG-JET ster oil

225.00240.00162.00170.00

REPLACEMENT CAPSULES “GLO-STICK” FOR HVLD-80

Type Gas Oiltype Unit size (1) 6 pcs

price

HF 08 411HF 08 414

GS-101GS-3

R-12R-22

MineralMineral

0-1.3 kg4.5-11 kg

42.50168.00

HF 08 415HF 08 416HF 08 417

GS-101/EGS-1/EGS-2/E

R-134aR-404AR-407A/C

EsterEsterEster

0-1.3 kg1.3-2.2 kg2.2-4.5 kg

49.0090.00

122.00

(1) Capsule size depends on refrigerant gas kg. inthe installation.

Code Item €

UNIVERSAL CASE

HF 08 491 Mod. 16331. universal case:• UV wireless lamp• Injector• 6 additive cartridge• Battery charger 220V• UV glasses• 1/4" SAE port• ID stickers• Additive cleaner

380.00

HF 08 495HF 08 496HF 08 497

Mod. 16336 Box 6 universal additive cartridge 7.5 mlMod. 16337 Box 6 universal additive cartridge 15 mlMod. 16338 Box 6 universal additive cartridge 22.5 ml

59.0086.00

116.00



nd


Capsules “Glo-Stick” connectionto the refrigeration system

16331

OPK-100 BEZ

HF LEAK DETECTION VIA ULTRAVIOLET LAMPCode Item €

HF 08 451 Mod. LD2, case containing:• Lamp UV with connection cables, clamp 12V• Glasses U.V.• Fluorescent liquid• Dissolvant cleaner fluorescence 100.00

FITTINGS

HF 08 453HF 08 454

Bottle 250 ml fluorescent fluidBote 400 ml fluorescent leakage cleaner

48.0014.00

OIL TRANSFERCode Item €

OIL RECHARGE PUMP

HF 09 001HF 09 006

To pump refrigerating oil to a pressurised systemSupplied with adapter to connect to SUNISO tankMod. 21702 for compressorsMod. MINI MAX TransFer. Includes rubber adapter forall bottles.

125.00

90.00OIL DRAIN PUMP

GA 07 110

• Including hoses suction-outflow• Flow 15-20 l/min rateMod. Palanca 53.00

OIL INJECTORS

HF 09 031HF 09 032

• To install in the low line of the analyser.Oil regulation function

Mod. DS/0-12 Injector connection 1/4" SAEMod. DS/0-134 Injector connection 3/8" SAE

19.8019.80

CHECK PUMP FOR WATER SYSTEMSCode Item €

MA 09 001

Effective water pump for heating systems, plumbing...• Water tank 5 litres• Max. Pressure: 40 bar• Suction volume: 45 ml. aprox.• Plunger greaserMod. PR 40 150.00

TEST PLUG

MA 09 005MA 09 006

• End cap for leakage control• Working pressure: 20 Bar1/2 RED cap (Bag 100 pcs.)1/2 BLUE cap (Bag 100 pcs.)

0.29/pc0.29/pc

IN-LINE INJECTION MACHINECode Item €

• Allows introduction of liquid into loadedand sealed systems.

• Completely reusableIN-LINE INJECTORS

HF 18 211HF 18 215

Metallic body thread 1/4" M SAE. Load 29 ml.Plastic body thread 1/4" M SAE. Load 59 ml.

68.9012.00

CHARGE INJECTOR

• Metallic body thread 1/4" H SAE

HF 18 212HF 18 213

7.5 ml. to 15 ml. LOAD15 ml. to 60 ml. LOAD

63.9690.50



nd


Mod. Mini Max

Mod. Palanca

Mod. DS

Mod. 21702

ANTIFREEZING FOR REFRIGERATION SYSTEMS

Code Item €

ICE BLOCK

HF 18 081

• Propyleneglycol antifreeze liquid protecting up to -73°C• Non toxic

Bottle of 3.8 litres 35.80

MA MAINTENANCE AND PROTECTION SPRAYSCode Item €

COLD ZINC SPRAY

MA 10 102

• Heat resistant up to 120°C wthin 15/20 minutesCold zinc sprayZINCOL box 12 pcs

6.005.00/pc

COPPER SPRAY

MA 10 105• To protect metallic surfaces (pipes welding, heating

elements, water tanks, etc)• Effective anti-rusting power• Quick drying (only 5 minutes)• Heat resistant 150°CCopper spray (400 ml) 8.75

STAINLESS STEEL SPRAY

MA 10 106

• To protect metallic surfaces (pipes welding, heatingelements, water tanks, etc)

• Rust proof and fire resistant• Quick drying (only 5 minutes)• Resistant to heat 300°CStainless steel spray (400 ml) 9.25

DEHUMIDIFYING SPRAY

MA 10 107

• Removes humidity, high efficiency, lubrication function• Perfect for electric systems and metal surfaceANTIHUMIDITY spray (400 ml) 7.35

MULTI USE LUBRIFICANT SPRAY

MA 10 108

• Oxide protection• Good for oil products cleaning• High lubrication performance• Humidity protection• Removes blocked mechanismsLUBRIFICANT Spray (400 ml) 5.12

LUBRIFICANT SPRAY WITH TEFLON

MA 10 109

• Full covering and lubrication• Working temperature range: -35 to +250°CTF-LUBE Spray (400 ml) 9.80

PENETRATING FLUID

MA 11 249 Penentrating oil CARAMBA 3.45

SMOKE GENERATOR FOR LEAKAGE DETECTIONCode Item €

MA 10 501MA 10 502

• Perfect for air leakage detection in air ducts and chimneys100 m3 bottle (30 sec.)300 m3 bottle (90 sec.)

20.9537.46



nd


MA EXTERNAL CLEANING EQUIPMENTS AND PRODUCTS• High pressure hydrocleaners

Code Item €

Characteristics:• 230V II voltage• IP 55 protection• Pressure regulation valve• Gun, hose and high pressure tube• Three axial piston pump

HOBBY SERIES

MA 11 031

• Flow: 370 l/h• Pressure: 110 bar• Power: 1.4 Kw• Weight: 7.8 Kg.Mod. HOBBY 141 125.00

Accessories included:

PORTABLE SERIES

MA 11 032

• Flow: 210 l/h• Adjustable pressure: from 5 to 35 bar• Power: 400 W• Weight: 9.5 Kg.• Includes a case for transportMod. AC-Cleaner TSS-B 442.00

• Atomizers for cleaning

Code Item €

MANUAL LEVER

MA 11 021

MA 11 022

•Bandoleer• Jet-propelled nozzle• 1.5 mts. hoseMARI - II 5 litres• 5 litres tankMARI - II 10 litres• 10 litres tank

32.00

73.00

PUMP WITH TANK

MA 11 025

• 20 lts. tank• Mobile with wheels• 850 mm nozzle and 3 mts. tube• Pump: 1/2 CV, 220V• Pressure: 4 Kg/cm2

FLUX/C 450.00



nd


AIR

conditioning

Installer

MA EXTERNAL CLEANING EQUIPMENTS AND PRODUCTS• Paint stripper kit

Code Item €

MA 11 061

• Contains: stripping gun 2000W for 480°C/600°C,including case and accessories

Paint stripper kit 35.00

• Air conditioning cleanerCode Item €

MA 11 230

• Cleaning• Sanitising• Eliminates odoursSpray OMNET (750 cc) 6.00

• Detergent for air-conditioner

Code Item €

MA 10 221

CLIMANET to clean filters, evaporators, batteries,fans, etc.Bottle of 10 Kg. 64.00

• Cleaner for air conditionersCode Item €

MA 11 241MA 11 223MA 11 243

• Used for the cleaning process of air conditioningsystems and circuits. It is also used for the externalcleaning of Splits, internal units, filter cleaning, etc.It can be used for the cleaning of all kind of surfacesnot damaged by water.

AIRNET Atomizer Spray 1000 cc.Atomizer AIRNET 520 cm³AIRNET Bottle of 5 kg

11.009.50

42.40

MA 11 242MA 11 222MA 11 244

• Spray the areas causing the badodour. In air conditioning equipments, clean the aircircuit with our cleaning product AIRNET, oncecleaned, apply AIRPUR spraying until saturation.Switch on the equipment to distribute theproduct evenly

AIRPUR Atomizer Spray 1000 cc.Atomizer AIRPUR 520 cm³AIRPUR Atomiser Spray 1000 cc.

15.3510.5062.40

• Cleaning systemsCode Item €

TIDAS SYSTEM

MA 11 245MA 11 246MA 11 247

• System containing:1 bottle Bactericide + Fungicide1 bottle Insecticide + MiticideTidas System AAC.2 x 600 mlTidas System AAC.2 x300mlTidas System AAC.2x150ml

44.6027.2518.65

MA 11 248• Sanitizes ambient air in rooms and carsTidas AmbientH. system 2x150 VDT** 12.72



nd


S Y S T E M

T I D A SPROFES SIONALCERTIFICATE

• Hand sanitizer gel

Code Item €

MA 11 267MA 11 266

IRINA bottle 100 mlIRINA bottle 500 ml

4.108.20

• Anti-wastepipe odoursCode Item €

MA 11 250 AIRE SANO Wastepipes 6,28

• Cleaner for filter and fans

Code Item €

HF 18 061 • Removes dirt, dust or tar concentrations inelectrostatic filters

FILTER FAN “Vent Cleaner” Bottle with dispenser 14.85

• Degreaser without soda

Code Item €

MA 11 238MA 11 239

• Special for air grills cleaning of air conditioningsystems. Also suitable for air conditioners indoorunits cabinets, boilers, etc. Not agressive.Biodegradable. Aluminium friendly.

Degreaser AC2 Spray 750 mlDegreaser AC2 Bottle 5 litres

6.8029.50

• Plunger for trays, toilets,...

Code Item €

MA 10 645

• Releases all type of cloggings due to organicmaterials

• 90% biodegradable500 ml bottle FLOW 6.50

• ESCO “CRACK” professional plunger

Code Item €

MA 10 646MA 10 647

Tensioactive, non ionic (<5%) powerful lime scaleremover and oxidant. Perfect for organic material1 litre canister5 litres canister

4.2018.90

• Coil cleaner

Code Item €

HF 18 241

• Powerful powder cleaner for coils, evaporatorsand condensers

• Soluble in proportion 6 to 1(0.3 Kg are equivalent to 3.8 litres of concentrate)

• High performance corrosion inhibitor0.3 Kg container COIL MAX 13.80

DRYING LIQUIDCode Item €

HF 18 031HF 18 032

• It dries all kind of liquids using a chemichal reaction forall kind of refrigerants (R-22. R134A, etc.) and lubricants

• Unblock frozen systems with humidity in only 5 min.• Residues freeTHAWZONE 28 ml bottleTHAWZONE 116 ml bottle

3.809.85



nd


SUITABLE FOR

REFRIGERANTSALLTHAWZONE

®

Flow

Esco"Crack"

Filter Fan

MA ANTILIME PUMPCode Item Tank €

ANTI-LIME PUMP «DOS»

MA 11 201

MA 11 202

Mod. DOS 25• 0.25 CV motor at 220 V II• Flow 54 lts/min. (3.24 m3/h)Mod. DOS 40• 0.40 CV motor at 220 V II• Flow 66 lts/min. (3.96 m3/h)

15 lts

30 lts

397.00

584.00ANTI-LIME LIQUID «DISINEX»

MA 11 211MA 11 212

• For copper and steel• Biodegradable - eco-friendly10 lts. can D-930 lts. can D-9

30.0090.00

ANTI-LIME LIQUID «MANTEX»

MA 11 215

• Valid for aluminium• Biodegradable - eco-friendly10 lts. can SNO-10 104.50

DESCALING LIQUID FLV (no ADR -25%)

MA 11 217MA 11 218

• For copper and steel• Biodegradable - eco-friendly10 lts. can FLV (no ADR -25%)25 lts. can FLV (no ADR -25%)

28.0060.00

ANTI-LIME DESCALING FLV (no ADR -25%)

MA 11 219

• For copper and steel• Biodegradable - eco-friendly10 lts. can FLV 78.00* Unlike ADR-25%, no documents for transportof hazardous material needed

ACID NEUTRALISING LIQUID

MA 11 213•Acid neutralising liquid10 lts. can N-105 30.65

AIR COMPRESSOR AND ACCESSORIES• «SEMI PROFESIONAL» series

Code ItemMax

pressbar

TankL.

Flowlts/min CV €

• No oil piston compressor. No maintenance required• With handle for an easy carrying• Weight 14 Kg• One phase 220V-50Hz

MA 12 021 CIAO 6/1850 8 6 179 1.5 165.00

MA 12 022MA 12 023

• One phase 220V-50HzAMICO 25/SF2500AMICO 50/SF2500

88

2450

182182

22

180.00260.00

GENERATORSCode Item €

MA 12 502MA 12 503MA 12 504MA 12 505

• One phase generator 230/50 Hz• 3000 rpm• 2/4 stroke petrol motor• Output 12V/8.3A except MG950MK2500 Max power 2.2 KVA 4 t.MK3500 Max power 2.8 KVA 4 t.MK5500 Max power 4.5 KVA 4 t.MK6500 Max power 5.5 KVA 4 t.

425.00472.00838.00945.00



nd


MK3500CL

CIAO 6/1850

AMICO 25/SF2500

DISINEX

MANTEXZINCK 010

DOS

AA SEALING FOR THREADCode Item €

TEFLON IN PASTE «SISEAL»

AA 25 894AA 25 893

• Liquid sealing with a PTFE (teflon) base formetal thread unions. Ideal to substitute hempor teflon roll

• Guarantees a perfect joint in water, gas andcompressed air

• Working pressure: 25-30 bar• Resistant to vibrations and thermal changes,

keeping its sealing properties in temperaturesfrom -50 to +150°CThe joint is instant in low pressure, allowingan easy assembly

• Non-setting compound100 gr. tube50 gr. tube

12.409.63

TEFLON TAPE

Item Length(m)

Width(mm)

Thickness(mm)

AA 25 901 PTFE tape roll 12 12 0.075 0.53

AA 25 902 PTFE tape roll 12 12 0,1 0.77

AA 25 905 PTFE tape roll 50 19 0.1 5,04

AA 25 906 PTFE tape roll 50 25 0.1 8.22

REEL TEFLON STRING«TWINE-SEAL 240»

AA 25 909

• PTFE (teflon) sealing for water, oil, vapour, gas, etc.installations.

• Does not melt, get dirty, harden or is flammable• Functional stability from -200°C to +240°C• Maximum working pressure: 100 barCoil 175 metres 22.46

BURLAP ROLL

AA 25 881Burlap roll for sealing threadsBurlap roll 6.55



nd


SECUREAND EASYASSEMBLY

Discounts

of catalogue

VALVES

AA-25

HF SEALER FOR REFRIGERANTS

Code Item €

HF 18 232HF 18 233HF 18 231

• Sealing for all the refrigerant (R-22. R-134a, etc),gases, steam, air, water, etc.

• Temperature from -93°C to 200°C• Flexible adjusting compound, it sticks on internalsurfaces filling in hollows

Jar LEAK LOCK 38 grJar LEAK LOCK 118 gr with brushJar LEAK LOCK 460 gr with brush

4.9513.3531.35

REPAIR KIT - EPOXYCode Item €

HF 18 295

RedEpoxy is a new high performance, two part, heatcured, epoxy repair kit for making permanent repairon all metals and rigid plastics.RedEpoxy has succesfully repaired aluminiumevaporators, heating coils, hot water heater tanks,pipes, tanks, etc.• Red Expoxy is specifically designed to exhibit a

distinct color change when heat cured.• Can be used with a hot-air gun or propane torch• An induction time of only 10 minutes. When the

repair has cooled the equipment may bereturned to service immediately.

• Temperatures: -73° to 149°C• Tensile strength: 200 bar• Working pressure: higher than 200 barKit contains 2 tubes (14 gr. each one) 18.50

INSPECTION CHAMBER DUCTS AND MACHINERYCode Item €

«SEE SNAKE»

HF 16 101 • Check the duct interior through a Ø14mm drill whichallows the chamber pass in hardly reachable places.

• LCD screen 2.5"• Flexible wire 900 mm• Chamber Ø13 mm with light• With case and pointers: light mirror, magnetsSEE SNAKE 330.00

Video «BORESCOPE»

HF 16 105 • Sensitivity: 1.7 Lux• 1 m. cable with cell• Weight: 370 gr.• Powered by 4 x 1.5V batteries• Short distance focus: 3 to 6 cm.• Head tube diameter: 10 mm• Including 320 x 190 x 75 mm case 150.00

NOTE: For cables longer than 3m - PLEASE CHECK



nd


See Snake

Borescope

MA LIFTS

C700 SeriesConstituted by:• Telescopic system of three sections, two of them

operated by steel cable, guided by pulleys.• Manual tractel of 350 Kg of maximum load with

automatic curb of load retention. However,it is not recommended to carry over 130 Kg.

• Protection to avoid oxide and painted in martele colour.• Unslidable brackets..

Code ItemHeight (m) Max.

loadKg

WeightKg €

Min. Max.

MA 14 151 C-711 1.45 3.65 130 23 565.00

ACCESSORIES

MA 14 155 Wheels kit C711/712 65.00

C800 SeriesComposed by:• Winch of 500 Kg of maximum load with automatic curb of load retention.

Minimum load work: 25 Kg.• Extensible legs to support the tower with wheels. The legs can be placed in

parallel to the chassis for their transport.• Wheels to move the wheelbarrow.• Handles to take the wheelbarrow easily.• Coated with Zinc, anti-rust protection and painted in martele colour.

Features:• Maximum height: 3330 mm. With forks in normal position.• Maximum height: 3330 mm. With upside down forks• Minimum height: 2120 mm.• Weight: 70 Kg.• Width: 650 mm.• Maximum raisable load: 160 Kg.

Code ItemMax. Height (m) Max.

loadKg

Weight

Kg €Normal Inverted

MA 14 161 C-800 3.33 4.00 160 70 1,205.00

306CM SeriesIncludes:• Extending base.• Sections telescopic system

Features:• Max. load: 160 Kg.• Max. height: 240 cm• Max height: 306 cm. With forks in inverted position.

Code ItemMax. Height (m) Max.

LoadKg

UnitWeight

Kg€

Normal Inverted

MA 14 010 306CM 2.40 2.70 160 66 800.00



nd


C700 Series

C800 Series

Packedsample

C306 CM Series

MA ELECTRICAL ELEVATOR

CM Series



nd


Code ModelHeight (m)

Load capacity(Kg)

Weight(Kg) €Basic Eleva-

tion

MA 14 141 CM-340 0,97 3,3130 Kg a 3 m

120 Kg a 3,3 m21 1,200.00

MA 14 145 Set of wheels CM-340 (accesory ) 65.00

MA 14 142 CM-520 1,12 4,9140 Kg a 2,8 m130 Kg a 4 m90 Kg a 4,9 m

38 1,710.00

The portable lift of the series CM is the device that instals,places and raises any heavy load

• Telescopic stick solid aluminium treated with heat, when warm, solid, reliableand safe.

• No tools needed for installation. The legs can be folded and unfoldedimmediately without tools.

• 4 telescopic legs, versatile and adjustable to without limits. It can be used onan irregular surface or like stairs.

• Elelectronic remote control with several speed switch. The switch can startsoftly or it can be adjusted using the micro height operation.

• Stop key for emergencies. Push the key to immediately stop the device goingup/down.

• Manual mode: the portable lift is designed to operate manually in case of afailure of the electric supply.

• It is supplied with an automatic break to avoid an overcharge.

• The level in the stick renders the installation safe while the telescopic legs arebeing mounted.

• Special design of the platform to install air conditioning.

• Completely portable. Its portable design makes it easier to transport.

• Its special design allows it to work very close to the wall.

• CM 520 has additional wheels for CM 340.

Split air Pipe Attached to the wall

Foldeddevice

MA ELEVATORS

2100 Series



nd


• For heights of 4.0 - 5.6 and 7.3 m• Capacity 300 Kg• Standard security break• Side stabilizers• Standard arms• Compact design

Technical dataModel 2112 2118 2124

Height cm 213.4 213.4 213.4

Length at rest cm 86.4 86.4 86.4

Length at working cm 157.5 184.4 185.4

Width base cm 79.4 79.4 79.4

Width with unfolding side stabilizers cm 188 188 188

Space between the feet andthe ground cm 6.4 6.4 6.4

Load (minimum height) cm 15.2 15.2 15.2

Max. height (forks downwards) m 3.4 5.1 6.7

Width standard forks cm 54.6 54.6 54.6

Length standard forks cm 71.1 71.1 71.1

Net weight Kg 114.5 146 166

Centred load Kg 300 300 300

Load with extended forks Kg 90 90 90

Code Item Max. loadkg

Max. heightm

Full weightkg €

Mod. SUMNER LIFT

MA 14 221MA 14 222MA 14 223

LIFT 2112LIFT 2118LIFT 2124

300300300

3.45.16.7

122.7157.3180.9

2,468.003,097.003,634.00

MA 14 231Accessories:Side stabilizer 290.00

REVERSIBLE FORKS COMPACT FOLDED

STABILIZING FEETIt can be supplied with optional stabilizing feet in order to improve stability.The feet, which can be folded, are mounted on a base, and this helpswidely to stabilize the elevator on the ground. Each folding foot is providedby a bolt of 12.7 cm long, that makes the movement of the elevator easierwhen it is loaded.

MA LIFTS FOR MACHINES ANDAIR PIPESSuper Lift

• Folding height: 199 cm• Ground level: 50,8 cm• Standard base width: 80 cm• Work position length:

SLA-10 146 cmSLA-15 184 cmSLA-20 204 cmSLA-25 204 cm

• (*) Loading capacity:Up to 3,5 mts: 450 kgrsUp to 5 mts: 365 kgrsUp to 7,9 mts: 265 kgrs

Code Item Max. loadkg

Max. heightm

Weightkg €

MA 14 021MA 14 022MA 14 023MA 14 024

SLA - 10SLA - 15SLA - 20SLA - 25

(*)

3,505,006,507,90

118144184204

3,830.003,980.004,710.005,350.00

MA 14 031Accesories:Side Stabilizers 450.00

ELECTRIC SPLIT ELEVATORC-250 Series

Dismantable elevator to mount on the condenser units support through a lowpower drill. It can lift a condenser. One man can mount heavy equipments.The condenser unit has to be sourrounded by the steeled wire.Hang it in the hook and lift it with the drill power up to the squares.

CHARACTERISTICS:• Elevation up to 138 Kg. • Elevator weight: 27 Kg• Maximum elevation: 10 m • Steel wire metres: 11 m

Code Item €

MA 14 125 Split elevator Serie C-250 375.00

LIFTCode Item €

MA 14 115

• Load capacity: 2.000 - 2.500 Kg• Forks long: 1.150 - 1.220 mm• Forks wide: 550 - 685 mm• Maximum elevation: 110 mm• Maximum height: 85 - 74 mmLift 450.00



nd


Super Lift

SCSOPORT

MA CART + 3 STEP STAIRSCode Item €

CART + FOLDING STAIRS

MA 14 112

• Loading capacity: 60 Kg• Each step holds up to 150 kg

Aluminium superfolding cart 85,00

FOLDABLE CARTCode Item €

FOLDABLE CART

MA 14 118

• Load capacity: 90 Kg• Surface of charge: 350 x 240 mm• Wheels Ø150 mm• Minimum height: 730 mm• Maximum height: 1.090 mmFoldable cart 50.00

HANDCART

MA 14 113

• Load capacity: 200 Kg• Wheels Ø24.5 x 8.5 mm• Weight: 10 KgHandcart 52.00

METAL DETECTORSCode Item €

MA 15 015 Mod. MT13• Metal detector and electric wire• Light and sound indicator 10.00

MA 15 020 Mod. DM10• 12 cm submersible detecting sensor• Sound indicator• Power: 9V Battery• Weight: 210 g• Carrying case 45.00

MA 15 025 Mod. DM30• High sensitivity (Coins from 10 cms to 60 mm)• Sound and vibration indicator, LED light• Dimensions: 420 x 80 x 40• Power: 9V Battery• Weight; 430 g• Carrying case 90.00

HF INSPECTION MIRRORSCode Item €

HF 16 001HF 16 009

• 5 articulated positions• TelescopicMod. MIR - 1 circular shaped Ø 40 mm.Mod. MIR - 5 oval shaped Ø 32 x 50

4.755.98

HF 16 011 Mod. FLM-1 oval Ø 50 mm• 45 mm length, with flexible handle and LIGHT• Operates with 2 1.5V batteries (not included) 18.50

TELESCOPIC MAGNETISED BARCode Item €

HF 16 022

• Length (close): 126 mm• Length (open): 637 mmMod. BT503 6.00



nd


Foldablecart

Handcart

FLM-1

MT13

MIR-1

DM10DM30

BT503

HF OIL ANALYSERS• Oil identifier

Code Item €

HF 18 304 OIL-ID Type• Identifies in a few seconds the oil type for the installation

(POE or another)• Individual monodose pot 15.60

• Acidity checkerCode Item €

HF 18 303HF 18 302

• Checks the installation acidity degree• Individual monodose potACID DETECTOR Mineral oilACID DETECTOR ESTER-POE oil

12.5013.35

• Acid analyserCode Item Oil type €

HF 18 003 • Analyser kit KMP TKO type Mineral 13.90HF 18 005 • Analyser kit KMP ETK type Synthetic 19.10

• Universal acid test for refrigeration oils

Code Item €

HF 18 006

• Accurate results in few seconds for all refrigeration oils• Simple to understand with colour change indicators

4 Complete tests ACID TEST in each kit 16.50

• Acidity, moisture and conductivity test case

Code Item €

HF 18 025 CHECKMATE (Supply in complete case)• Suitable for ALL types of oil: mineral, ester, PAG, etc.• Easy removal from the closed circuit 263.30

HF 18 026HF 18 027HF 18 028

Set of 3 spare tubes acidSet of 3 spare tubes moistureSet of 3 spare tubes conductivity

44.5044.5044.50

LEAK SEALERCode Item €

SUPER SEAL ACR

HF 18 235 54 gr. up to 1.82 kgr. Minimum oil charge 284 ml.Up to 5.3 Kw. Ref. KIT 947 60.00

SUPER SEAL HVACR

HF 18 236 From 1.82 kgr and minimum oil charge 887 ml.Up to 5.3 Kw to 17.6 Kw. Ref. KIT 944 64.00

SUPER SEAL PRO

HF 18 237 Special for R134a circuits (Self-propulsion)Includes bend and disposable connector 57.00

CLIMA STOP

HF 18 261 Can 30 ml. to install maximum 1 kg. gas cooling or mo-nosplit 50.60

HF 18 262 Can 42 ml. to install cooling or multisplits up to 1.5 kg. ofgas 61.90

HF 18 263 Can 60 ml. to install cooling maximum 3 kg. of gas77.81

ACIDITY NEUTRALIZERCode Item €

ACID NEUTRALIZER

HF 18 015 • Eliminates acidity from recovery equipments(burnt compressor)

• Compatible with all types of oils (mineral/ester)• Compatible with all types of refrigerant gases• No harm to any components 23.50



nd


FORTYPES OF

OILS

ALL

FORTYPES OF

OILS

ALL

Includes adaptor1/4" SAE and

5/16" SAE

FORTYPES OF

OILS

ALL

Code Item €

ACID AWAY

HF 18 300

HF 18 301

• Eliminates residual acidity• Preventive acidity maintenanceACID AWAY MINERAL Oil12 pots boxACID AWAY ESTER Oil12 pots box

29.6027.50/pc

31.2029.65/pc

HF TRANSFER PUMPSCode Item Flow rate

lts/minPressure

Bar Power €

MAGNETIC UNIVERSAL POWERPARA R-12, R-22, R-134a, R-502 Y R-404A

HF 19 221 TMC-1-054 265.20

WORK SPOTLIGHTSCode Item €

PORTABLE HALOGENOUS SPOTLIGHT

HF 20 001 • Power 500W• Floor support and carrying handle•1.5 m wire with socket 22.70

HALOGEN LAMP FIX

HF 20 003 • Power 500W• Cable with 1.5 m plug 15.23

FOOT AND HALOGEN SPOTLIGHT

HF 20 005HF 20 006HF 20 011

• Ideal for works. With enlargeable foot and telescopic• Includes 3 m wire with socket1 500W spotlight2 500+500W spotlightSpare light 500W

49.4063.603.10

PORTABLE SPOTLIGHTCode Item €

HF 20 021 • With bulb protection and hook• 10 m wire with socket 11.75

WIRE ROLLERCode Item €

HF 20 101HF 20 102

• Wire section 3x1.5 mm• Thermal protection• Carrying handle• Max. 16A (3000W)Roller 25 mRoller 50 m

52.0090.75

FOLDABLE WORKING BENCHCode Item €

MA 23 001 Mod. MT 13505• Dimensions: 606 x 640 x 813 mm• Foldable 47.50

DRAWERS FOR PILING UPCode Item €

AF 18 041AF 18 042AF 18 043AF 18 044

• GREY colour• Reinforced, for pilling up130 x 150 x 240 mm drawer130 x 150 x 340 mm drawer150 x 210 x 340 mm drawer180 x 300 x 490 mm drawer

3.985.568.19

15.50



nd


To fixPortable

Foot withlamp

MA VACUUM CLEANERSCode Item €

VACUUM CLEANER FOR DUST

MA 22 001

MA 22 101

ASTRO 100• Power 1.000 W 220V II• 15 lts. stainless steel tray• Complete Ø 36 accessory kitBag ASTRO 100

309.3032.14

MA 22 003

MA 22 102

ASTRO 110• Power 1.000 W 220V II• 20 lts. stainless steel tray• Complete Ø 40 accessory kitBag ASTRO 110

382.2037.35

MA 22 005

MA 22 103

ASTRO 220• Power 2 motors of 1.100 W• 50 lts. stainless steel tray• Ø 40 accessory kitBag ASTRO 220/330

673.5051.80

MA 22 007

MA 22 103

ASTRO 330• Power 3 motors of 1.100 W• 50 lts. stainless steel tray• Ø 40 accessory kitBag ASTRO 220/330

763.2051.80

PORTABLE VACUUM CLEANER

MA 22 021 KOSMOS 8 model• Weight: 3.9 Kg.• Bandolier to hung ACCESSORIES• Ideal to clean wall boilers, heaters,conditioners, etc.

• Water flow: 1.680 litres/min• Depression: 1200 mm c.d.a. 128.75

MA 22 020 10 spare paper bags “Kosmos” 14.20

HAND BLOWER

MA 22 025

MA 22 026

SHB-530B model• Power : 530W to 230V II• Weight: 1.700 gr.• Air flow: 2.7 m3/min• Pressure: 560 mm c.d.a.• Length: 405 mmSpare bags SHB-530B

103.006.00

LEVELS, MEASURING TAPE CALCULATORS, SQUARESCode Item €

LEVEL

MA 20 001MA 20 005

LIV magnetic base level. Length 225 mmLIV magnetic base level. Length 500 mm

2.1513.40

SQUARES

AI 52 140 Dimension 300 mm 3.29

TAPE MEASURES

AI 52 172AI 52 173AI 52 176AI 52 177AI 52 178

3 metres5 metres10 metres20 metres50 metres

2.763.008.95

11.7318.52



nd


ASTRO

KOSMOS

SHB-530B

e c o l o g i c a

MA GRINDING MACHINE

Code Ref.supplier Description €

STANDARD GRINDING MACHINE

• 3 nozzles 3, 4 and 5 mm• Protection acetate handle• Aluminium rivet: 3.0 - 3.2 - 4.0 - 4.8• Steel rivet: 3.0 - 3.2 - 4.0• Stainless rivet: 3.0 - 3.2 - 4.0

MA 04 021 Grinding machine mod. STANDARD 12.96

PROFESSIONAL GRINDING MACHINE

• 3 nozzles 3, 4 and 5 mm• Acetate protection handle• Revolving head• Aluminium rivet: 3,0 - 3,2 - 4,0 - 4,8• Steel rivet: 3.0 - 3.2 - 4.0• Stainless rivet: 3.0 - 3.2 - 4.0

MA 04 022 Grinding machine mod. PROFESIONAL 24.60

VENEER CUTTERCode Model €

VENEER CUTTER

MA 17 001

MA 17 003

MA 17 005

MA 17 007

MA 17 009

Mod. M - 1RLeft curved or straight cutsMod. M - 2RRight curved or straight cutsMod. M - 3RStraight cuts or wide curvesMod. M - 6RTo the left (up to 1.5 mm)Mod. M - 7RTo the right (up to 1.5 mm)

13.65

13.65

35.47

13.65

13.65

ELECTRIC TOOLS• Fretsaw

Code Item €

MA 17 341 • Power: 570W• Maximum cut in wood: 65 mm• Maximum cut in steel: 8 mm• Weight: 2 Kg 57.50

• Drill battery with caseCode Items €

PORTABLE DRILL WITH BATTERY

MA 17 301 • Battery 18V• Revolutions from 0 to 900 rpm• Automatique mandrel 10 mm• Load from 3 to 5 hours• Weight: 1.7 Kg• Includes: 6 bits and adapter• Supplied in a plastic case 62.00

MA 17 303ACCESORIES:Spare battery 18V 24.00



nd


17 ELECTRICAL TOOLS• Drills

Code Model €

SÚPER BRICO 500W

MA 17 331

• Mandrel Ø13 mm• Reversible hammer• 0-2800 rpm• 230V-50HzSÚPER BRICO 500W 21.85

HAMMER DRILL 760W

MA 17 333

• Automatic mandrel Ø13 mm• Function DRILL and HAMMER• Variable speed 0-3000 rpm• Reversible• Adjustable handle• Insertion rubber nonslip• Ergonomic• 230V-50HzDRILL HAMMER 760W 36.40

HAMMER DRILL 1200W

MA 17 334

• Aluminium body• Automatic mandrel Ø13 mm• DRILL and HAMMER modes• Speed selector 0-1000 rpm/0-3000 rpm• Reversible• Regulating handle• Insertions rubber antislid• Ergonomic• 230V-50HzHAMMER DRILL 1200W 62.50

• Grinding machine

Code Model €

MINI GRINDING MACHINE 500W

MA 17 321

• For dials up to Ø115 mm• Tension 230V-50Hz• Blocking keyMINI GRINDING MACHINE 500W 21.80

MINI GRINDING MACHINE 900W

MA 17 322

MA 17 323

• For dials up to Ø115 mm• Reinforced switch• Blocking button to change quick disc• LED warning wearing of brush• Handle 3 positions• Alumnium head• 11000 rpm• 220/240V - 50/60HzMINI GRINDING MACHINE 900W

Spare disc Ø115

40.60

3.65



nd


MA SAFETY ITEMS AT WORK

• Protection helmetMODEL CENTURIÓN €

Colour White Red Yellow Orange11.31Code MA 30 121 122 124 125

MA 30 131 Model CENTURIÓN with white thread 15.15MODEL BERICO €

Colour White Red Yellow Orange5.67Code MA 30 137 138 135 140

• HarnessCode Item €

MA 30 161MA 30 162

Harness side and front hookBasic harness side hook

76.3559.40

• Safety boots series ECOSAFETY BOOTS S1P STEEL TIP AND INSOLE €

Number 38 39 40 41 42 43 44 45 4644.50Code MA 30 021 022 023 024 025 026 027 028 029

SAFETY BOOTS S1P DALLAS STEEL TIP AND INSOLE €

Number 38 39 40 41 42 43 44 45 4648.25Code MA 30 081 082 083 084 085 086 087 088 089

• Protection glassesCode Item €

MA 30 101MA 30 102

Glasses polycarbonate with ventilation gateGlasses polycarbonate antisteam eye colourless

2.192.69

• Nylon glovesNYLON GLOVES POLYURETANE LAYER €

Size 6 7 8 9 101.76Code MA 30 103 104 105 106 107

GLOVE SUEDE FLOWER GOAT GREY €

Size 6 7 8 9 105.19Code MA 30 – 108 109 110 111

Code Item (One size) €

MA 30 112 Glove suede sleeve "Half arm" model 4.28

• Ear protectorCode Item €

MA 30 114MA 30 115

Ear protector 21 dBAEar protector 26 dBA

5.607.40

EARPLUG MOLDEX SPARK

Item ReductionMA 30 151MA 30 152MA 30 153

Box 200 bags 2 units earplugBox 200 bags 2 units earplug with stringBox 200 plastic case . 2 units earplug

35 dB35 dB35 dB

53.94120.5376.68

• MasksCode Item €

MA 30 116MA 30 118MA 30 120

Light mask FFP1S (bag 3 units)Self-filtering mask FFP2Coal mask active against organic steam(bag12 uts.)

3.55/ut2.37

5.85/ut

• Kit 3 pieces(mask + ear protector + glasses)Code Item €

MA 30 117 Set protection 3 pieces 7.30



nd


MA 30 101

MA 30 102

MA 30 115

MA 30 116

MA 30 114

MA 30 103

MA 30 108

MA 30 112

MA 30 161

MA 30 138

MA 30 152

MA 30 151

SECURITY

MA 30 122

IM DIGITAL TEMPERATURE MEASUREMENTCode Item €

THERMOMETER «DIGI-THERMO»

IM 12 104

• Resolution: 0.1° C• Accuracy: ±1° C• Temperature indication MAX-MIN• Acoustic alarm MAX-MIN• Probe inox. long. 100 mm with 1 mt wire• Includes multiuse clip and table support• Measurement unit selection C/F• Power supply: 1 battery AAA 1.5 VDIGI-THERMO (immersion) -50/+300°C 18.00

POCKET THERMOMETER«DELTATRAK»

IM 12 106 Mod. HVACR• Measuring range: -40 a +150° C• Resolution: 0.1° C• Accuracy: ±1° C• Hold• Sensor inox. 89 mm• With overprobe, magnet and velcro• Auto shut off• Power supply: 1.5 V battery 30.00

POCKET THERMOMETER «ALL IN ONE»

IM 12 109 Mod. HBK-115• Range: -50 to +300° C. Resolution: 0.1° C• Accuracy: ±1° C ±1% v.m. (-20 to +150° C)

±2° C ±1% v.m. (otherwise)• Probe length 130 mm (portable and adjustable to 45°,

90°, 135° and 180°)• With memory to hold 10 readings• Mín-Max function• Programmable beeper• Auto power on /off simply unfolding and folding the

probe• Safety cord• Battery: 1.5 V cell• Dimensions: 153 x 49 x 20 mm 59.30

WALL THERMOMETER

IM 12 121

IM 12 122

• Measuring range: -20 a +50°C• Resolution: 0.1° C• Power supply: 2 x AG13 (1.5V) button cells• For use on windows, cars, boards, etc.THERMO-STICK INSIDEFront sight on board or glassTHERMO-STICK OUTSIDEFront sight through glass

6.00

6.00



nd


HVACR

DIGI-THERMO

THERMO-STICKINSIDE THERMO-STICK

OUTSIDE

HBK-115

IM INFRARED DIGITAL THERMOMETERSCode Item €

POCKET INFRARED THERMOMETER

IM 12 166 Mod. TI10• Measuring range: -33 to +220°C• Resolution: 0.1°C / Accuracy: ±0.6°C• Optical relation 1:1• Emission: 0.05 to 1.00• MAX-MIN temperature indicator• Power supply: 1 CR2032 unit• Dimensions: 18 x 37 x 68 mm• Weight: 65 grams, including battery• Aluminium transport case 40.00

POCKET INFRARED THERMOMETERWITH LASER POINTER

IM 12 167 Mod. TI20• Measuring range: -55 to +250°C• Resolution: 0.1°C Accuracy: ±0.1°C• Optical relation 6:1• Emission: 0.05 to 1.00• MAX-MIN temperature indicator• Laser pointer• Power supply: 2 CR2032 unit• Dimensions: 22.5 x 50 x 103 mm• Weight: 32 grams, including battery• Aluminium transport case 60.00

INFRARED THERMOMETERWITH LASER POINTER

IM 12 155 Mod. TESTO 810 - serie Pocket• Measuring range (IR sensor ): -30 to +300°C• Accuracy: ±2°C (-30°C...+100°C). otherwise ±2% m.v• Resolution: 0.1°C• Range (NTC, room temperature): -10 to 50°C• Accuracy: ±0.5°C. Resolution: 0.1°C• Dimensions: 119 x 46 x 25 mm• Adjustable emisivity• Optical relation 6:1• Shows differential temperature• Función Hold / max. / Min.• Auto switch-off• Backlit display• Includes: protection cover, belt, batteries and

calibration protocol 111.71INFRARED THERMOMETER WITH LASER POINTER

IM 12 170 Mod. TI30• Backlit display• Measuring range: -20 to +537°C• Resolution: 0.1°C. Accuracy: ±1°C• Optical relation 12:1• Emission: 0.95• MAX-MIN temperature indicator• Laser pointer• Power supply: 9V 6F22• Dimensions: 162 x 56 x 190 mm• Aluminium transport case 120.00

INFRARED THERMOMETER LONG DISTANCEWITH LASER POINTER

M 12 175 Mod. TI40• Backlit LCD• Measuring range: -50 a +1000°C• Resolution: 0.1°C. Accuracy: 1.5%• Optical relation 50:1• Adjustable emissivity: 0.10 to 1.0• Alarm (high/low)• MIN-MAX-AVG-ΔT• Laser pointer• °C/°F• Batteries: 9V• Dimensions: 100 x 56 x 230 mm• Transport case 300.00



nd


TI10

TI20

Testo 810

TI30

TI40

IM DIGITAL TEMPERATURE MEASUREMENTCode Item €

DIGITAL THERMOMETER «TESTO 925N»

IM 12 335

• Measuring range: -50 to 1000° C• Accuracy: 0.1°C (-50 to 199.9°C)/ 1°C• Accuracy: ± (0.5°C + 0.3% v.m) (-40 to 900°C)

± (0.7°C + 0.5% v.m)• Sensor: Thermocouple type “K”• Connection of the sensor by radio waves withoptional module

• Printing function optional.• Functions of MIN - MAX - HOLD• Programable beeper• Display with light• Power supply : 1 batery LR-61 9V• Dimensions: 182 x 64 x 40 mmTESTO 925 N without probes 103.45

IM 12 338IM 12 339IM 12 340

PROBES WITH CABLE– Immersion probe: -60 to 400° C (fig. 1)– Air probe: -60 to 400° C (fig. 2)– Surface probe: -60 to 400° C (fig. 3)

46.4463.3363.33

IM 11 447PRINTERInfrared printer IRDA 256.32

IM 12 361IM 12 362IM 12 363

ACCESSORIESSmall CaseBig case (units + sensors + accesories)Case Topsafe

31.6742.5330.62

MULTIFUNCTION PROFESSIONAL CLASSTHERMOMETER WITH TWO PROBES

IM 12 401 HBK-16 model• Measuring range: -200 to +1270° C• Resolution: 0.1° C• Accuracy: ±0.05%• Triple display (T1 + T2 + clock)• Differential temperature (T1 - T2)• Incorporated clock to check processes

(Hour and minutes / Minutes and seconds)• Max. and min. and average• Max. and Min. alarms• Reading retention and self-switching off• Suitable for thermopairs K and J• Includes:

– 2 probes with thermopair cable of 1 mt.from -40 to +150°C (environment, contact, etc)

– Rubber protection

251.92

IM 12 338IM 12 339IM 12 340IM 12 405IM 12 406

OPTIONAL PROBES– Immersion probe: -60 to 400°C– Air probe: -60 to 400°C– Surface probe: -60 to 400°C– Probe with thermopair cable of 1 mt: -40 to 150°C– Probe with thermopair cable of 1 mt: -40 to 600°C

46.4463.3363.3325.1742.43



nd


TESTO 925N

IRDAprinter

1 2 3

HBK-16

1 2 3

4

5

IM ANEMOMETERSCode Item €

POCKET ANEMOMETER - THERMOMETER«TESTO 405-N»

IM 13 066 TESTO 405-N series Pocket• Measurement

range: -20 / +50° C0 - 5 m/seg (-20 a 0° C)0 - 10 m/seg (0 a 50° C)0 - 99.990 m3/h

• Flow in m3/h, introducing the area• Resolution: 0.01 m/sec / 0.1° C• Accuracy: ± 5% v.m. / ± 0.5° C• Sensor: extending Ø16 mm full lenght 300 mm• Including multiuse clip and duct support 136.41

MICRO-ANEMOMETER «KESTREL»

IM 13 010 K1000 (Anemometer)• Dimensions: 122 x 42 x 18 mm• Weight with cover: 66 gr• Measuring range: 0.3 to 40 m/sec• Resolution: 0.1• Accuracy: ± 3% v.m.• Indication of max. and average speed• Shock proof cover with safety strap• High accuracy replaceable impeller Ø25 mm• Water-proof IP 67• Measure units: m/s, km/h, Mph, Ft/min, knots 100.00

IM 13 011 K2000 ( Thermo-anemometer)The same as K1000 plus:• Temperature indication:– Measuring range: -20 to 60°C– Accuracy: ±1°C– Resolution: 0.1°C

• Wind chill equivalent temperature• Temperature units: Fahrenheit and centigrade 130.00

IM 13 012 K3000 (Anemometer + Thermometer + Hygrometer)The same as K2000 plus:• Relative humidity indication:– Measuring range: 0 - 100% H.R.– Accuracy: ±3%– Resolution: 1%

• Indication of the temperature equivalentto humidity degree

• Indication of the dew point 200.00

IM 13 030

IM 13 017

K4200 (Anemometer + Flowmeter+ Thermometer +Hygrometer + Barometer + Altimeter)Measures:• Speed:– Range: 0.3 to 40 m/s

• Temperature:– Range: -20 to +60° C• Humidity:– Range: 5 a 95% Hr• Flowrate(by introducing dimensions of conduct):

– Range: 0 to 99,999 m3/h• Barometric pressure:– Range: 300 to 1100 mbar• Height:– Range: < 6000 mt at 25°C

Automatic calculation of:• Equivalent temperature to cooling by wind• Temperature equivalent to humidity degree• Dew point• Density of air (expressed in mt.)

Protector case with fixing clip

350.00

20.00



nd


Automatic calculation of the temperatureequivalent to the humidity degree

A greater humidity degree in the environment causes abigger thermal feeling:

26.3°C + 66% HR= 28.5°C

Automatic calculation of the temperatureequivalent to cooling caused by wind

A 7° C temperature with a12 m/s wind feels like -6° C

7°C + wind 12 m/s= -6°C

AnemometerFlow meter Thermo-meterHygrometerBarometerAltimeter

Testo 405-N

K4200

IM ANEMOMETERS

Code Item €

ANEMOMETER MULTIFUNCTION«TESTO 435-1 N»

IM 13 043

• Measuring range: look at probes• Resolution: 0.01 m/seg - 0.1 m/seg - 0.1°C

0.1% HR - 1 ppm / 0.1 hPa• Air speed, air flow, humidity, temperature, CO2.

pressure• Via radio comunication with optional module• Optional printer• Function MIN - MAX - HOLD• Average of values by point and time• Automatic switch-off• Display with light• Power supply: 1.5V three AA batteries• Dimensions: 220 x 74 x 46 mmTESTO 435-1 N (without probes) 491.89

IM 13 047IM 13 048IM 13 051IM 13 056

IM 12 338IM 12 339IM 12 340

PROBES• Sensor: 0.6 a 40 m/s diam. 16 mm (fig. 6)• Sensor: 0.25 a 20 m/s diam. 60 mm (fig. 7)• Hot wire sensor: 0 a 20 m/s diam. 7.5 mm (fig. 8)• Combined sensor HR/Temp/Abs Pressure/CO2

0-100% HR / 0-50°C / 600-1150 hPa / 0-10000 ppm• Immersed sensor: -60 a 400°C (fig. 1)• Air sensor: -60 a 400°C (fig. 2)• Surface sensor: -60 a 400°C (fig. 3)

463.38474.99293.45

787.4546.4463.3363.33

IM 11 447PRINTERIRDA infrared printer 256.32

IM 13 058IM 13 059

ACCESSORIESCaseCase (equipment + probes + accessories)

90.77144.61

IMPORTANT:Add the probe stem to the anemometer

ANEMOMETER -THERMOMETER«TESTO 425 N»

IM 13 062

• Measuring range: 0 to 20 m/sec / -20 a 70° C• Resolution : 0.01 m/sec / 0.1°C• Accuracy: ± (0.03 m/s + 5% v.m) / ± 0.5°C (0 to

60°C) / ± 0.7°C• Telescopic sensor• Temperature, flow and volume flow measurement• Read values can be printed with optional printer• MIN - MAX - HOLD function• Multi-point and timed mean calculation• Auto off function• Display light• Power supply: 1 LR-61 9V battery• Dimensions: 182 x 64 x 40 mmTESTO 425 N 492.94

IM 11 447PRINTERIRDA Infrared printer 256.32

IM 12 361IM 13 065

ACCESORIESCaseTopsafe cover

31.6730.62



nd


TESTO 425N

Printer IrDA

TESTO 435-1 N

1 2 376 8

IM THERMO-ANEMOMETER

Code Item €

DIGITAL THERMO-ANEMOMETER «DCFM-8901»TEMPERATURE / SPEED / FLOW

IM 13 151 Digital thermo-anemometer DCFM-8901• Range:

– Speed: 0.4 to 25 m/s– Temperature: -10 to 50° C

• Resolution: 0.1 mts/sec / 0.1° C• Automatic calculation of air-flow• Max-Min amd average values• Impeller Ø 70 mm.• RS-232 serial port• With carrying case 324.56

WALL ANEMOMETER-THERMOMETER

IM 13 201

IM 13 202

IM 13 211

• For measuring temperature and speed• Scale 0 to 30 m/s - 0 to 50°C• Resolution: 0.1 mts/seg / 0.1° C• Accuracy ± 0.5% minimum reading 0.4 m/s1% minimum reading 0.4°C

• Sensor 300 mm, 2 m cable• Units °C and °F• Supply 24 Vac/dc• Dimensions 110 height x 100 width x 42 depth (mm)• Version with back probe, please consultCTV100-VOD 300• 2 digital output 0/10V adjustable scalesCTV100-AOD300• 2 digital output 4-20 mA adjustable scalesKI BFP 13-COUPLING• Ø 13 mm coupling for fixing the sensor

247.83

254.53

20.69

HUMIDITY AND TEMPERATURE INDICATORCode Item €

The Digital Panel THR-S132 has been designed tomonitor the temperature and relative humidity in the en-vironment in an air-conditioned/heated room and to ful-fill the Royal Decree 1826/2009, 27 November, forwhich the Regulations of Thermal Installations inBuildings have been modified (RITE), approved by Ro-yal Decree 1027/2007 20 July.

The digital panel is an electronic device, based in a mi-croprocessor with dimensions 420x300 mm (formatDIN A3), which has large led displays to monitor thetemperature and relative humidity in the environment.The dessign of the pannel allows the assembly in aquick and easy way, both in the wall and the roof.

IM 16 131IM 16 132

Panel to monitor display THR-S132Additiomal probe of temperature and humidity

495.00105.00



nd


Additional probe

IM CLAMPMETERS AND MULTIMETERSCode Item €

DIGITAL AMPERIMETRIC CLAMPMETER

IM 14 200 Mod. PA10• Safety design to meet CE e IEC-1010• Measurement: 0-600 V ac

0-1000 V dc0-600 A ac0-2 MΩ

• Frequency: 2KHz• Clamp opening range: 2" (5 cm)• Power supply: 9 V alcaline batteries• Dimensions: 230 x 68 x 35 mm.• Weight: 300 grs. (including battery)• Supplied with proof tips and case 28.00

IM 14 235 Mod. PA30• LCD backlit screen• Measurement: 0-600 V ac/dc

0-400A ac0-20 MΩ

• CAT III (600V)• Clamp size 23 mm• Audible continuity and diode test• Power supply: 2 x 1.5V AAA batteries• Dimensions: 200 x 50 x 35 mm• Weight: 200 g• Supplied with proof tips and case

34.00

IM 14 240 Mod. PA40• LCD backlit screen• Measurement: 0-600V ac/dc

0-400A ac0-20 MΩ0-150KHz

• CAT III (600V)• Clamp size 23 mm• Capacity, continuity and diode test• Power supply: 2 x 1.5V AAA batteries• Dimensions: 200 x 50 x 35 mm• Weight: 200 g• Supplied with proof tips and case 68.00

DIGITAL MULTIMETER

IM 14 215 Mod. M10• Safety design to meet CE & IEC-1010 CAT II (600V)• Backlit screen• Measurement: 0-600V ac/dc

0-10A dc0-2 MΩ

• Resistance, continuity and diode test• Supplied with proof tips and case• Power supply: 9 V battery• Dimensions: 138 x 69 x 31 mm.• Weight: 170 grs. 14.00

IM 14 220 Mod. M20• LCD backlit screen• Measurement: 0-600V ac/dc

0-200 mA ac/dc0-20 MΩ

• CATIII (1000V)• Auto-ranging and auto power off• Continuity and diode test• Flashlight• Non contact voltage detector• Power supply: 2 batteries 1.5V AAA• Dimensions: 104 x 55 x 32.5 mm.• Weight: 145 grs.• Supplied with proof tips and case 36.00



nd


PA30

PA40

M10

M20

PA10

IM DIGITAL MULTIMETERCode Item €

DIGITAL MULTIMETER

IM 14 225 Mod. M30• Safety design to meet CE and IEC-1010 (safety)

CAT III (600V), CAT II (1000V)• Measurement: 0-750V ac

0-1000V dc, 0-10A ac/dc, 0-20 MΩ• Resistance, continuity and diode test• Supplied with proof tips and case• Power supply: 4.5V batteries 1.5V AAA• Dimensions: 158 x 74 x 31 mm• Weight: 220 grs. 24.00

DIGITAL THERMOMETER-HYGROMETERSCode Item €

«TESTO 605-H1-N»POCKET HYGROMETER-THERMOMETER

IM 16 247 TESTO 605-H1-N Serie Pocket• Measurement: 0 to +50°C

5 - 95% HR• Dew point calculation (td)• Resolution: 0.1°C / 0.1% HR• Accuracy: ± 0.5°C / ± 3% HR• Sensor: Ø 12 mm, long. 125 mm• Supplied with multiuse clip and duct support 110.64

«TESTO 610»POCKET HYGROMETER-THERMOMETER

IM 16 248 TESTO 610 - Serie Pocket• Dew point calculation and wet bulb included• Measurement: -10 to +50°C / 0 - 100% HR• Accuracy: ±0.5°C / ± 2.5% HR• Resolution: 0.1% / 0.1% HR• Dimensions: 119 x 46 x 25 mm• Hold / Máx. / Mín. function• Automatic off function• Display light• Protective cap for safe storage, belt case, wrist strap,

batteries and calibration protocol included 170.78

DIGITAL THERMOMETER-HYGROMETERSCode Item €

TERMO-HYGROMETER «TESTO 625 N»

IM 16 231IM 16 235

• Measuring range: 0 to 100% HR / -10 to 60°C (NTC)-200 to 1370°C (thermopair K)

• Resolution: 0.1% Hr / 0.1oC / 0.1°C• Accuracy: (± 2.5% HR) (5 to 95% HR) / ±0.5°C• Compact probe stem• Air speed, air flow, humidity, temperature, dew point

and wet bulb temp.• Via radio comunication with optional module.• Optional printer• Function MIN - MAX - HOLD• Average of values by point and time• Automatic switch-off• Display with light• Power supply: 9V LR-61 battery• Dimensions: 182 x 64 x 40 mmTESTO-625 N with integrated sensorHandle with wire 1 m

267.0550.66

IM 11 447PRINTERIRDA infrared printer 256.32

IM 12 361IM 13 065

ACCESSORIESCaseCase Topsafe

31.6730.62



nd


TESTO 610

TESTO 605-H1-N

TESTO625 N

IM DIGITAL THERMOMETER-HYGROMETERSCode Item €

HYGROMETER-THERMOMETER

IM 16 105 Wall or table• Measurement: 10 to 99% Hr / -10 to 60o C• Resolution: 1% Hr / 0.1 oC• Dimensions: 110 x 70 x 20 mm. 32.00

HYGROMETER-THERMOMETER«TH-20»

IM 16 115 • LCD backlit screen• Measurement: -30/+80°C, 0 - 100% HR• Accuracy: ±0.5°C, ±3.0% HR• Resolution: 0.1°C, 0.1 % HR• Double reading (°C - %HR)• MAX-MIN function• Dew point• Power supply: 9V 6F22• Dimensions: 225 x 45 x 34 mm• Weight: 200 gr. 116.00

WALL HYGROMETER-THERMOMETER

IM 16 401

IM 16 402

IM 16 403

• For measuring temperature and humidity• Range 2 to 98% HR / 0 to 50°C• Resolution: 0.1% HR / 0.1°C• Accuracy: 2% inbetween 10 and 90% HR /

1% inbetween 5 and 50°C• Alternative display of temperature and humidity• Units °C and °F• Supply: 24 Vac/dc• Dimensions: 110 height x 100 width x 42 depth (mm)• Versions with remote and back probe - please askHST-M• Programmable relay 3A to 230VacTH100-VOS• 2 digital output 0/10V with adjustable scalesTH100-AOS• 2 digital output 4-20 mA with adjustable scales

214.35

298.11

294.71

TACHOMETERCode Item €

PHOTO LASER / TOUCHTACHOMETER

IM 19 205 Mod. TC-10• Range: photo laser 5-99.999 RPM

contact 5-99.999 RPM0.05 - 1999.9 M/min• Accuracy: 0.05% ± 1 d• MAX-MIN• Auto range selection• Photo measuring distance: 50 mm - 500 mm• Supply: 4 x 1.5VAA• Dimensions: 160 x 74 x 37 mm• Weight: 200 g• Including cone tips• Carrying case 124.00

DISTANCE METERCode Item €

IM 19 302 Mod. MD10• Measuring range: from 40 cm to 18 m• Accuracy: ± 0.5%• Volume and SQM calculation• Power supply: 9V battery• Dimensions: 150 x 52 x 34 mm 36.00



nd


mod. WALLor TABLE

HST-M

TH-20

IM METAL DETECTORCode Item €

METAL DETECTOR

MA 15 020 Mod. DM10• Submersible detecting sensor 12 cm• Beeper• Power supply: 9V battery• Weight: 210 g• Carrying case 60.00

MA 15 025 Mod. DM30• High sensitivity (coins from 10 cms to 60 mm)• Vibration, acoustic indicator and LED• Dimensions: 420 x 80 x 40 mm• Power supply: 9V battery• Weight: 430 g• Carrying case 120.00

DIGITAL MANOMETER (AIR OR GAS)Code Item €

DIFFERENTIAL MANOMETER

IM 25 108 TESTO 510 serie Pocked• Switchable uts: hPa/mbar, mmH2O, mmHg, inH2O, psi• Measuring range: 0 a 100 hPa/mbar• Accuracy: ± 0.03 hPa (0...0.30 hPa)

± 0.05 hPa (0.31...1.00 hPa)• Resolution: 0.01 hPa• 119 x 46 x 25 mm• Temperature compensation• Magnetic rear for free-hand work• Hold/máx./min. function• Supplied with protective cap, wrist strap, belt hlder,

batteries and calibration protocol. 157.80

INTEGRATING SOUND LEVEL METERCode Item €

SONÓMETRO SC102 - CLASE 2

IM 20 215 • Measurement protocols for: traditional soundlevel meter, vehicles, activities and community,risks at work, machinery, accoustic power

• High-resolution screen (3.2")• Only three operating keys (soft key)• Range: 30 to 130 dB• Power supply: 2 LR-06 or USB connection

(cable not included)• Dimensions: 291 x 82 x 20 mm• Weight: 463 grs.• Resolution: 0.1 dB• Carrying case 876.00

ALKALINE BATTERIESCode Type Description Pcs.

Blister €/Blister

• 0% Cadmium mercury - Best QualityIM 27 081 AAA-LR03 • Voltage: 1.5 V

• Size: 10.2x44.1 4 2.10

IM 27 082 AA-LR06 • Voltage: 1.5 V• Size: 14.5x50.5 4 2.10

IM 27 083 C-LR14 • Voltage: 1.5 V• Size: 26.20x50 2 3.25

IM 27 084 D-LR20 • Voltage: 1.5 V• Size: 34.2x61.5 2 4.70

IM 27 085 9V-LR09 • Voltage: 9 V• Size: 26x17.5x48.5 1 2.95



nd


DM10DM30

INCLUDES

DECLARATION

OF CONFORMITY

accord to ministerial

decree of 16-12-98

CA ALUMINIUM SUPERFLEXIBLE DUCT

Code Item €/m

“ESCOFLEX”

CA 07 102CA 07 103CA 07 104CA 07 105CA 07 106CA 07 107CA 07 123CA 07 108CA 07 109CA 07 110CA 07 111CA 07 113CA 07 125CA 07 115CA 07 116CA 07 117CA 07 118CA 07 119

• Supplied in 10 metres• Folded from 0.5 to 0.7 m• Temperatures from -20 to 110°C• Maximum Speed: 20 m/second.• Pressure: 175 mm c.d.a.• M1 TypeDiameter 52 mmDiameter 76 mmDiameter 82 mmDiameter 102 mm (*)Diameter 127 mm (*)Diameter 152 mm (*)Diameter 160 mm (*)Diameter 180 mmDiameter 203 mm (*)Diameter 229 mmDiameter 254 mm (*)Diameter 305 mm (*)Diameter 315 mmDiameter 356 mmDiameter 406 mmDiameter 457 mmDiameter 508 mmDiameter 610 mm

1.101.121.151.151.351.601.752.252.203.003.053.944.005.126.728.109.50

12.60

* Quantity special offers (please ask)

INSULATED ALUMINIUMSUPERFLEXIBLE DUCT

Code Item €/m

INSULATED “ESCOFLEX”

CA 07 205CA 07 206CA 07 207CA 07 223CA 07 208CA 07 209CA 07 210CA 07 211CA 07 213CA 07 225CA 07 215CA 07 216CA 07 217CA 07 218CA 07 219

• Supplied in 10 metres• Folded at 1.15 m• Temperatures from -20 to 110°C• Maximum 20 m/second• M1 Type (C.S.T.B.)Diameter 102 mm (*)Diameter 127 mm (*)Diameter 152 mm (*)Diameter 160 mm (*)Diameter 180 mmDiameter 203 mm (*)Diameter 229 mmDiameter 254 mm (*)Diameter 305 mm (*)Diameter 315 mmDiameter 356 mmDiameter 406 mmDiameter 457 mmDiameter 508 mmDiameter 610 mm

3.754.254.824.965.755.957.908.08

11.9512.0813.2115.7417.2020.0623.20

* Quantity special offers (please ask)



nd


DESCRIPTION: Duct com-posed of superflexible tubewith thermal insulator in 25mm. of fibre glass, density 16Kg/cm3 and steam barrierwith reinforced aluminiumconvoluted.

ADVANTAGES:• It avoids thermal loss• Steam barrier• Very flexible

DESCRIPTION: Superflexible tube withsteel helical frame and double steel coa-ting.

ADVANTAGES:• Very light• Very flexible• Supercompressible• Easy installation• Attractive design

CA ALUMINIUM ACOUSTICALLY INSULATEDSUPERFLEXIBLE DUCT

Code Item €/m

“ESCOFLEX ACOUSTIC INSULATION”


• Supplied in 10 metres• Folded at 1.15 m• Temperatures from -20 to 120°C• Maximum air speed: 15 m/sec.• Max. pressure. 300 mm c.d.a.• M1 class (C.S.T.B.)Diameter 102 mmDiameter 127 mmDiameter 152 mmDiameter 160 mmDiameter 180 mmDiameter 203 mmDiameter 229 mmDiameter 254 mmDiameter 305 mmDiameter 315 mmDiameter 356 mmDiameter 406 mmDiameter 457 mmDiameter 508 mmDiameter 610 mm

4.224.685.065.286.046.447.468.359.58

10.0611.0514.9218.6020.0637.72

ALUMINIUM SUPERFLEXIBLE DUCT“KOMBI” PROTECTION BLACK

Code Item €/m

“ESCOFLEX KOMBI”


• Supplied in 10 metres• Working temperature: -30 a 140°C• Maximum air speed: 30 m/sec.• Maximum working accuracy: 300 mm.c.d.a.• Fire reaction class (Giordano Institute)Diameter 102 mmDiameter 127 mmDiameter 152 mmDiameter 160 mmDiameter 180 mmDiameter 203 mmDiameter 229 mmDiameter 254 mmDiameter 305 mmDiameter 315 mmDiameter 356 mmDiameter 406 mmDiameter 457 mmDiameter 508 mmDiameter 610 mm

2.863.223.954.104.705.246.306.928.329.32

10.9012.5015.8618.5221.96



nd


®

DESCRIPTION: Thermally andacoustically insulated duct con-taining superflexible perforatedaluminium tube and 25 mm glasswool insulation.

kombi

®

DESCRIPTION: Made of 3 alu-minium layers and 2 polyesterfilm layers outside and coveredby a black PVC layer

KOMBI

CA ALUMINIUM SUPERFLEXIBLE DUCTWITH BLACK PVC PROTECTION

Code Item €/m

CA 07 155CA 07 156CA 07 157CA 07 158CA 07 159CA 07 160CA 07 162CA 07 164CA 07 165CA 07 166CA 07 167

• Supplied Long. 10 m• Folded from 0.5 to 0.7• Exterior BLACK PVC layer• Working temperature: -20°C to +110°C• Maximum speed 20 m/sec• Maximum pressure: 175 mm whDiameter 102 mmDiameter 127 mmDiameter 152 mmDiameter 160 mmDiameter 180 mmDiameter 204 mmDiameter 254 mmDiameter 305 mmDiameter 315 mmDiameter 355 mmDiameter 405 mm

2.202.623.283.724.054.305.506.606.907.759.24

ALUMINIUM SUPERFLEXIBLE DUCTWITH GREY PVC PROTECTION

Code Item €/m«ESCOFLEX-KOMBIFLEX»

CA 07 355CA 07 356CA 07 357CA 07 358CA 07 359CA 07 360CA 07 362CA 07 363CA 07 364CA 07 365CA 07 366

• Supplied Long. 10 m• Folded from 0.5 to 0.7• Exterior GREY PVC layer• Working temperature: -20°C to +110°C• Maximum speed 20 m/sec• Maximum pressure: 175 mm whDiameter 102 mmDiameter 127 mmDiameter 152 mmDiameter 160 mmDiameter 180 mmDiameter 204 mmDiameter 254 mmDiameter 305 mmDiameter 315 mmDiameter 355 mmDiameter 405 mm

2.202.623.283.724.054.305.506.606.907.759.24

ELASTIC JOINTSCode Item €

«JUNTAESC 45»

CA 09 303CA 09 304

• For the installer (clinch)• Dimensions: 45 x 60 x 45 mm.Reel 25 metres RO 4560-25Reel 50 metres RO 4560-50

58.82117.63

«SUPERESC»

CA 09 313

• Temperature operation- 30 a 70° C• Dimensions 70 x 100 x 70Reel 25 metres RO 70100-25 83.10

«SUPER-TEMPESC»

CA 09 321

• Polyurethane with glass fibre• Temperature operation 400°C/2 hours• Resistence to fire M0• Dimensions 50 x 60 x 50 mmReel 25 metres PU 5060-25 119.53



nd


®

®

2 hours2 hours

AI FIXING FLEXIBLE TUBES TOFIBRE DUCT

• Sleeve with flange «CONDUC-COLL»

Mounting Code Diameter €

AI 39 003

AI 39 004

AI 39 005

AI 39 015

AI 39 006

AI 39 007

AI 39 008

AI 39 009

AI 39 010

AI 39 016

AI 39 011

AI 39 012

Ø 100

Ø 125

Ø 150

Ø 160

Ø 175

Ø 200

Ø 225

Ø 250

Ø 300

Ø 315

Ø 350

Ø 400

3.90

4.25

4.75

4.95

5.10

5.60

5.85

5.95

6.85

7.05

7.50

8.50

• Sleeve for screwing «FIBRA-COLL»


AI 39 101

AI 39 102

AI 39 103

AI 39 104

AI 39 105

AI 39 106

AI 39 112

AI 39 107

AI 39 108

AI 39 109

AI 39 110

AI 39 111

Ø 100

Ø 125

Ø 150

Ø 160

Ø 175

Ø 200

Ø 225

Ø 250

Ø 300

Ø 315

Ø 350

Ø 400

3.98

4.20

4.70

4.90

5.00

5.50

5.80

6.36

7.81

8.75

9.50

11.50

• Sleeve with 3 feet «TUB-COLL»


AI 39 121

AI 39 122

AI 39 123

AI 39 124

AI 39 125

AI 39 126

AI 39 127

AI 39 128

AI 39 129

AI 39 132

AI 39 130

AI 39 131

Ø 100

Ø 125

Ø 150

Ø 160

Ø 175

Ø 200

Ø 225

Ø 250

Ø 300

Ø 315

Ø 355

Ø 400

3.24

3.40

3.96

4.05

4.35

4.90

5.36

5.75

8.89

9.15

9.50

11.50



nd


®

CA FIXING ACCESSORIES FOR FLEXIBLE TUBE• Metal Strip

Code Item €

FORMABLE«STRIP STEEL» CLAMPS

CA 07 911CA 07 916

30 metres coilLoose devicesBox of 50 devices by traction

23.500.60

0.50/pc

«VERYFLEX»CLAMPS MADE TO MEASURE

CA 07 941CA 07 942CA 07 943CA 07 944CA 07 945CA 07 946CA 07 947CA 07 948CA 07 949CA 07 950

• Strip inox steel• Adjustable traction deviceI 110 (50 to 110)I 135 (60 to 135)I 170 (60 to 170)I 215 (60 to 215)I 270 (60 to 270)I 325 (60 to 325)I 380 (60 to 380)I 425 (60 to 425)I 525 (60 to 525)I 660 (60 to 660)

0.850.901.001.201.301.601.752.202.502.75

• Polyamide Clamp

Code Dimensions Ø Max.Duct

Unitsper bag €/unit

• 6.6 Polyamide colour BLACK• Autoextinguishing• Use -40 to 110° C

CA 07 955CA 07 958CA 07 959CA 07 961CA 07 962

7.8 x 5407.8 x 780

9 x 78012.5 x 1000

9 x 1220

up Ø160up Ø230up Ø230up Ø305up Ø355

1001001005050

0.420.520.761.321.47

CA 07 969 ATC 8 Clampmeter (Tighten width: up to 8 mm) 25.00

CA 07 970 ATC 13 Clampmeter (Tighten width: up to 13 mm) 88.00



nd


CA 07 969

➊ ➋ ➌ ➏➎➍ ➐

Mounting sequence Clamps «VERIFLEX»made to measure:

CA 07 970

CA PRESSED FITTINGSFOR GALVANISED SHEET DUCT

DUCT(3 m)

COUPLINGMALE/MALE

COUPLINGWITH FLANGE END CAP BEND

45°BEND

90°

First code -> CA 01 002 CA 01 071 CA 01 202 CA 01 302 CA 01 452 CA 01 522

100 4.55 /m 2.47 8.30 6.74 10.44 12.40

125 5.68 /m 2.47 8.58 7.07 12.06 13.25

150 6.84 /m 2.73 8.58 7.38 13.97 15.62

175 7.82 /m 3.04 8.86 7.87 14.61 18.21

200 9.11 /m 3.37 8.86 8.35 17.34 24.13

250 11.24 /m 4.11 11.02 9.78 22.63 30.15

300 16.37 /m 4.98 13.99 12.87 29.70 41.24

355 22.92 /m 5.78 15.60 13.11 34.99 47.35

400 26.18 /m 6.58 15.60 15.40 41.24 63.13

CA T PIECES AND DISTRIBUTORS

T PIECE90°

T PIECE45° SURFACE CLAMP CLAMP

WITH NUT M8 CHECKPORT CHIMNEY CAP

First code -> CA 01 602 CA 01 562 CA 01 172 CA 01 280 CA 01 229 CA 01 336

100 10.60 13.35 5.35 5.35 19.83 13.25

125 12.52 15.19 5.35 5.35 20.28 14.78

150 16.37 21.10 6.25 6.10 21.65 15.89

175 18.14 25.51 6.58 6.41 — 18.20

200 20.54 26.67 6.90 6.52 22.95 18.94

250 27.76 35.47 8.66 7.89 27.41 23.11

300 35.32 49.27 9.78 8.67 30.56 27.31

355 44.46 60.38 12.20 10.60 39.33 31.30

400 54.25 75.11 12.68 10.60 45.90 39.81

ALL MODELS IN STOCK* Special sizes not available

** For bigger sizes please ask



nd


®

DIM

EN

SIO

N(m

mØ

)D

IME

NS

ION

(mm

Ø)

dD 80 100 125 150 175 200 250 300 355

100 7.75125 9.61 9.61150 11.80 11.80 12.13175 13.65 13.99 13.99 13.99200 15.51 16.17 16.00 16.00 15.84250 20.73 20.73 20.73 20.73 20.73 20.40300 25.62 25.79 25.79 25.62 25.44 25.28 24.44355 31.69 31.69 31.69 31.69 31.52 31.34 31.02 29.84400 37.42 37.42 37.25 37.25 37.09 37.09 36.57 35.40 34.05

Note: There are no intermediate sizes.

CA REDUCTIONS

MA TOOLS FOR WORKING WITH PLATE• Shear for opening windows in plate

Code Item €

MA 17 155MA 17 156

• Quick and accurate cutting• Connection to drill bits• Cutting up to 1 mm• Weight 0,73 kg• Long life tempered steel blade• Left cutting• Minimum inlet hole 13 mmShear for drill TS1Replacement blades kit TS1RB

143.4061.30

• Circle cutter

Code Item €

MA 17 161MA 17 162MA 17 165MA 17 166

Inlet Ø6,35 mm• Aluminium body• Perfect cut thanks to high speed bearings• Smooth cutting with no burrs• Graduation system in mm• Connection bits

Circle cutter HC1 (50 a 300 mm)Circle cutter HC2 (50 a 500 mm)Spare pivot shaft HC1BSpare cutting shaft CB

139.20177.4021.0027.30



nd

ACCESORIES MOUNTING SPLITS 165

L = 2

®

TS1

HC1

HC2

CV VENTILATION BOXOBRA Series

• Front discharge• Rear suction

OBRA CIRCULAR Series• Front discharge• All sides closed




nd

Air outlet position

Unique

BUILT -IN

MOTOR

IP 55

Fixing supports

Code Models equivalences Motor (CV) R.p.m €

220V SINGLE-PHASE CLOSED MOTOR - 1 SPEED

CV 01 265CV 01 266CV 01 267CV 01 276CV 01 268CV 01 269CV 01 270CV 01 281CV 01 271CV 01 279CV 01 272CV 01 273CV 01 274CV 01 275CV 01 295CV 01 278CV 01 298CV 01 290

BD 19/19 M6BD 19/19 M4BD 25/20 M6BD 25/20 M6BD 25/25 M6BD 25/25 M6BD 25/25 M4BD 25/25 M4BD 28/21 M6BD 28/21 M6BD 28/28 M6BD 28/28 M6BD 28/28 M4BD 33/25 M6BD 33/25 M6BD 33/33 M6BD 33/33 M6BD 33/33 M6

7/77/79/79/79/99/99/99/910/810/810/1010/1010/1012/912/912/1212/1212/12

1/101/51/61/31/61/31/23/41/31/21/31/23/43/41

3/41

1,5

9001350900900900900135013509009009009001400900900900900900

221.00226.00249.00268.00253.00261.00268.00270.00272.00297.00278.00294.00294.00390.00435.00398.00442.00503.00

230-400V THREE-PHASE CLOSED MOTOR - 1 SPEED

CV 01 277CV 01 280CV 01 300

BD 33/25 T6BD 33/33 T6BD 39/39 T6

12/912/1215/15

1,51,53

900900920

406.00409.00762.00

220V SINGLE-PHASE CLOSED MOTOR - 3 SPEEDS

CV 01 451CV 01 452CV 01 455CV 01 456CV 01 457CV 01 461CV 01 462CV 01 463CV 01 471CV 01 472

BD 19/19 M6BD 19/19 M4BD 25/25 M6BD 25/25 M6BD 25/25 M4BD 28/28 M6BD 28/28 M6BD 28/28 M4BD 33/33 M6BD 33/33 M6

7/77/79/99/99/9

10/1010/1010/1012/1212/12

1/101/51/41/31/21/31/23/43/41

268.00270.00303.00319.00313.00345.00352.00352.00472.00488.00

Motor

SPEEDS3

Code Models equivalences Motor (CV) R.p.m €

220V SINGLE-PHASE CLOSED MOTOR ROUND INLET

CV 01 305CV 01 306CV 01 307CV 01 308CV 01 309CV 01 311CV 01 313CV 01 312CV 01 314

BD 19/19 M6BD 19/19 M4BD 25/25 M6 FBD 25/25 M6 GBD 25/25 M4 HBD 28/28 M6BD 28/28 M6 HBD 28/28 M4BD 33/33 M6

7/77/79/99/99/9

10/1010/1010/1012/12

1/101/51/61/31/21/31/23/43/4

900135090090013509009001400900

252.00254.00280.00290.00293.00308.00323.00318.00437.00

Dimensions:Fan Ø

BD 19/19BD 25/25BD 28/28

7/79/9

10/10

250350400

ROUND

InletØ

CV ACCESORIES FOR VENTILATION BOXES

Fansize

SOLAR SHADEBlnd side Round inlet(2)

Pressure gridFilter Holder

Discharge Suction Discharge Suction

Coder: CV 05 103 -> 123 -> 603 -> 642 -> 303 -> 403 -> 521 ->

BD 19/19 AT7/7 30.50 46.00 7.75 16.25 57.25 79.75 59.25BD 25/20 AT9/7 32.00 46.00 11.75 24.00 62.75 91.25 67.50BD 25/25 AT9/9 32.00 46.00 9.50 18.00 71.75 91.25 67.50BD 28/21 AT10/8 37.75 49.75 13.75 26.25 — 99.00 72.75BD 28/28 AT10/10 37.75 49.75 10.50 20.50 — 102.50 72.75BD 33/25 AT12/9 38.00 57.75 12.25 28.75 88.25 140.25 80.75BD 33/33 AT12/12 38.00 57.75 12.75 30.00 95.50 147.00 80.75BD 39/39 AT15/15 45.50 58.75 19.00 31.00 99.50 166.25 114.75

Notes:(1) For other types such as Viledón man or foams, please see addttional information.(2) For and small or round inlets with more than one entry, there is an additional charge of 12.80 € (CV 05 186) each entry.

• Section changesIMPULSION HOPPER:

Circulardiameter

BD 19/19AT 7/7

BD 25/20AT 9/7

BD 25/25AT 9/9

BD 28/21AT 10/8

BD 28/28AT 10/10

BD 33/25AT 12/9

BD 33/33AT 12/12

BD 39/39AT 15/15

Code CV 05 823 -> 831 -> 841 -> 851 -> 861 -> 871 -> 881 -> 891 ->

150 33.00 50.50 38.00 — — — — —

200 33.00 57.25 38.00 55.75 41.25 — — —

250 34.75 60.50 39.50 65.50 41.25 — 50.25 —

300 41.00 63.00 41.00 68.75 43.25 49.25 50.25 87.75

350 — 67.25 42.25 72.75 44.75 50.75 52.00 90.75

400 — — 57.00 77.00 48.00 55.00 56.50 94.00

450 — — — — 73.50 78.00 78.50 97.25

500 — — — — — 96.25 97.25 102.50

Note: In case of special sizes, please apply the next price.

LOW PROFILE VENTILATION BOXES«BC» Series




nd

SOLAR PRESSUREGRIDS

Impulsion sizes

FILTER HOLDERBLIND SIDE ROUND INLET

Code Model Pot. m3/h r.p.m Dimensions€A B C Ø D E

CV 02 031 BC 250 65 W 290 2450 300 300 230 120 — — 167.00

CV 02 032 BC 400 80 W 375 2400 300 300 195 110 — — 161.00

CV 02 033 BC 600 85 W 460 1250 425 375 195 110 — — 187.00

CV 01 006 BC 25/13 1/5 CV 875 890 500 490 300 — 267 175 268.00

VE FAN BOXES FOR 400°C/2hBP-MU Series

TRANSMITTER SET:– Transmitter activated by built-in motor, not interfering with the air flow– Tensor-base-worm drive system, adjustable from the outside

TURBINE AND MOTOR:– Multiple-bladed turbine with double galvanised steel air inlet– Standardised squirrel-cage induction motor with IP-55 protection

and type F insulation

ASSEMBLY:– U-shaped guides in the lower part to make transport and assembly easier- Fan comes in compact, weather-proof galvanised steel box

Code Item PowerkW

WeightKg

Max. flowrate m3/h €

THREE-PHASE FAN

VE 10 750VE 10 751VE 10 752VE 10 753VE 10 754VE 10 755VE 10 756VE 10 757VE 10 758VE 10 759VE 10 760VE 10 761VE 10 762VE 10 763VE 10 764VE 10 765VE 10 766VE 10 767VE 10 768VE 10 769VE 10 770VE 10 771VE 10 772VE 10 773VE 10 774VE 10 775VE 10 776VE 10 777

BP-MU 400°/2h 9/9 1/2CVBP-MU 400°/2h 9/9 3/4CVBP-MU 400°/2h 9/9 1CVBP-MU 400°/2h 9/9 1,5CVBP-MU 400°/2h 10/10 1/2CVBP-MU 400°/2h 10/10 3/4CVBP-MU 400°/2h 10/10 1CVBP-MU 400°/2h 10/10 1,5CVBP-MU 400°/2h 10/10 2CVBP-MU 400°/2h 12/12 1/2CVBP-MU 400°/2h 12/12 3/4CVBP-MU 400°/2h 12/12 1CVBP-MU 400°/2h 12/12 1,5CVBP-MU 400°/2h 12/12 2CVBP-MU 400°/2h 12/12 3CVBP-MU 400°/2h 15/15 3/4BP-MU 400°/2h 15/15 1CVBP-MU 400°/2h 15/15 1,5CVBP-MU 400°/2h 15/15 2CVBP-MU 400°/2h 15/15 3CVBP-MU 400°/2h 15/15 4CVBP-MU 400°/2h 15/15 5,5CVBP-MU 400°/2h 18/18 1,5CVBP-MU 400°/2h 18/18 2CVBP-MU 400°/2h 18/18 3CVBP-MU 400°/2h 18/18 4CVBP-MU 400°/2h 18/18 5,5CVBP-MU 400°/2h 18/18 7,5CV

0,370,550,751,10,370,550,751,11,50,370,550,751,11,52,20,550,751,11,52,234

1,11,52,234

5,5

40424346474950545969717275798790919495103105110127131139141146160

3.1003.5003.8004.4003.5004.0004.4505.1005.5504.5005.4005.9006.8007.4008.4005.5006.0007.8508.7009.850

10.90012.00011,00012.00014.10015.80017.50019.500

880.00896.00918.00951.00922.00941.00960.00

1,017.001,045.001,056.001,066.001,085.001,125.001,151.001,215.001,314.001,363.001,383.001,424.001,497.001,509.001,628.001,674.001,695.001,792.001,819.001,913.002,058.00




nd

OUTSIDETHE RISK AREA

Note: if pressure levels and numbers offan revolutions are not otherwiseindicated, they will be supplied accordingto the standard configuration of 15/20 mmc.d.a. (200 Pa)

Certificado

CHARTS AND OPERATION:




nd

BP-MU 10/10

0

5

10

15

20

25

30

35

40

45

50

0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000

Q (m3/h)

Ps (mm H2O)

45

50

55

60

1200

1000

800

700

0,25 Kw

0,37 Kw0,55 Kw

0,75 Kw

1,1 Kw

900

1300

1100

600

500

1,5 Kw

BP-MU 9/9

0

5

10

15

20

25

30

35

40

45

50

0 500 1000 1500 2000 2500 3000 3500 4000 4500

Q (m3/h)

Ps (mm H2O)

45

50

55

60

1500

1400

1200

1000

800

700

0,18 Kw

0,15 Kw 0,25 Kw

0,37 Kw

0,55 Kw

0,75 Kw

1,1 Kw

900

1300

1100

BP-MU 15/15

0

10

20

30

40

50

60

70

0 2000 4000 6000 8000 10000 12000 14000 16000

Q (m3/h)

Ps (mm H2O)

45

50

55

60

1000

800

700

0,55 Kw0,75 Kw

1,1 Kw

900

1100

600

500

1,5 Kw400

2,2 Kw

65

3 Kw

4 Kw

BP-MU 12/12

0

6

12

18

24

30

36

42

48

54

60

0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

Q (m3/h)

Ps (mm H2O)

45

50

5560

1200

1000

800

700

0,25 Kw0,37 Kw

0,55 Kw0,75 Kw

1,1

900

1100

600

500

1,5

400

2,2

65

BP-MU 18/18

0

10

20

30

40

50

60

70

0 4000 8000 12000 16000 20000 24000

Q (m3/h)

Ps (mm H2O)

45

50

55

60

800

700

0,75 Kw 1,1 Kw

900

600

500

1,5 Kw

400

2,2 Kw3 Kw 4 Kw

5,5 Kw

L

CF I

GxH

BN

K

A

D

M

Model A B C D E F G H I K L M NBP-MU 9/9 780 562 792.5 301 260 30 678 454 29 970 890 721,5 60BP-MU 10/10 825 592 852 330 291 30 723 484 29 1029 949 766.5 60BP-MU 12/12 950 677 970 396 341 30 848 570 29 1147 1067 891,5 60BP-MU 15/15 1100 802 1102.5 473 404 30 1006 699 29 1280 1200 1041,5 60BP-MU 18/18 1271 923.5 1278.5 556 483 30 1175 818 29 1456 1376 1211 60

DIMENSIONS

VD DOMESTIC SERIES FANS• LOW SILHOUETTE WALL extractor fans

Code Item a b c D e Flow(m3/h) €

STANDARD series

VD 01 053VD 01 054VD 01 055

MU BP4 Ø100MU BP5 Ø120MU BP6 Ø150

150176205

120140165

108114132

100125150

121315

95180300

26.9130.5939.33

STANDARD WITH TIMER series

VD 01 056VD 01 057VD 01 058

MU BP4 T Ø100MU BP5 T Ø120MU BP6 T Ø150

150176205

120140165

108114132

100125150

121315

95180300

35.8639.4248.51

ACCESSORIES MU BP series

VD 01 059VD 01 060VD 01 061

Non-return valve Ø100Non-return valve Ø125Non-return valve Ø150

5.855.856.50

STANDARD seriesFIXING WITHOUT HOLES

VD 01 022

• Integratable model• Thick frame 10 mm• Non-return valve includedType MU 4 P Ø100 90 22.00

• Fans for inserting in ducts

Code Item Flow(m3/h) €

STANDARD Series

VD 01 071VD 01 072VD 01 096

MU TU 4 circular Ø100MU TU 5 circular Ø120MU TU 6 circular Ø150

100150280

19.0924.5443.44

• Tubular extractor inserted in the conduct with base

Code ItemFlow (m3/h)

€min max

VD 01 901VD 01 902VD 01 903VD 01 904VD 01 905

MU-TT 100MU-TT 125MU-TT 150MU-TT 160MU-TT 200

1872805525521040

145220467467830

69.3074.80

127.60129.80192.50

• Square/circular ceiling extractor

Code Item Flow(m3/h) €

VD 01 805VD 01 806

• Can be fixed to ceiling with flexible ductingØ100 mm• Includes non-return valve• Includes metallic bracket for fixing flexibleducting• Exterior finish: aluminium-coloured PVCframe and stainless steel diffuser• Power: 25W• Noise level: 46 dB• Hole size: 245 x 245Mod. APF 14-1DF Square diffuserMod. APF 14-2DF Circular diffuser

200

126.00126.00



nd


Motor2 speeds

VE CENTRIFUGAL FANSLOW PRESSURE

Code Item Power(CV) €

BP (built-in motor) Series

MONOPHASE

VE 10 252VE 10 251VE 10 250VE 10 253VE 10 257VE 10 258VE 10 255VE 10 256VE 10 259VE 10 261VE 10 260VE 10 262VE 10 265VE 10 264VE 10 267VE 10 268VE 10 272

BP 7/7 MC 4PBP 7/7 MC 6PBP 9/5 MC 6PBP 9/7 MC 6PBP 9/9 MC 4PBP 9/9 MC 4PBP 9/9 MC 6PBP 9/9 MC 6PBP 10/8 MC 6PBP 10/10 MC 4PBP 10/10 MC 6PBP 10/10 MC 6PBP 12/9 MC 6PBP 12/9 MC 6PBP 12/12 MC 6PBP 12/12 MC 6PBP 12/12 MC 6P

1/51/101/101/51/23/41/51/31/33/41/31/23/41

3/41

1.5

132.00130.00147.00154.00166.00163.00154.00162.00171.00186.00171.00186.00261.00291.00266.00306.00381.00

THREE PHASE

VE 10 266VE 10 269VE 10 270

BP 12/9 MC 6PBP 12/12 MC 6PBP 15/15 MC 6P

1.51.53

275.00278.00499.00

FLOOR SUPPORT SET

VE 10 091VE 10 092VE 10 075

Set S 7 / S9Set S 10 / S12Set S 15

2.002.003.00

WALL-MOUNTED HELICOIDAL FANSCode Item Power

(W)SpeedRPM

Flow(m3/h) €

HPMF Series

VE 10 801VE 10 802VE 10 803VE 10 804

HPMF 200 M4HPMF 250 M4HPMF 300 M4HPMF 350 M4

37424750

1400 RPMapprox

500900

1.3501.850

75.0085.0098.00

117.00

EXTRACTORS FOR INSERTING IN DUCTSCode Item Flow

(m3/h) €

«MIXVENT»

VD 02 065VD 02 068VD 02 066VD 02 067VD 02 069VD 02 063VD 02 057VD 02 064VD 02 062VD 02 070VD 02 103VD 02 104

TD 160/100 N SILENTTD 250/100TD 350/125TD 500/150TD 500/160TD 800/200TD 800/200 NTD 1000/250TD 1300/250TD 2000/315TD 4000/355TD 6000/400

1802403605805801100880

1.0101.3002.0003.8005.500

88.74110.18135.55164.86164.86225.94221.44303.93317.02361.44576.30787.99



nd


CLOSED MOTOR

IP 55

S P&S P&

VD EXTRACTORS FOR INSERTING IN DUCTS

Code Item Speedrpm

Noise leveldB(A)

Flow(m3/h) €

MODEL «TD SILENT»

VD 02 065VD 02 368VD 02 366VD 02 369VD 02 363VD 02 364

TD 160/100 N SILENTTD 250/100 SILENTTD 350/125 SILENTTD 500/150-160 SILENTTD 800/200 SILENTTD 1000/200 SILENT

250022002250250027802500

24/2124/19

1922/1719/1821/20

1802403805808801100

88.74126.70155.88189.59254.66349.52

* With internal covering that directs the sound waves and sound insulation.

KF AIR FILTRATION• Synthetic fibres

Code Item Reel €

POLYESTER FIBRE 20N

KF 04 022KF 04 021

Roll 20 N of 20x1Roll 20 N of 25x1.63

20.00 m2

40.75 m246.0092.00

REINFORCED POLYESTER FIBRE WHITE/BLUE

KF 04 031 Roll mat HPR 20 Blue 1 x 20 m. 84.00REINFORCED POLYESTER FIBRE WHITE

KF 04 041KF 04 051

Roll mat E3 efficiency G3Roll mat E4 efficiency G4

1 x 20 m.1 x 20 m.

60.0073.00

CUT TO MEASURE €/m2

KF 04 093 Mat 20N cut to measure 2.00

• Filter mats

Code Item Efficiency Flow x m2

m3/h

Initialpressure

loss (mm.c.a)€

KF 07 001KF 07 003KF 07 005KF 07 009KF 07 018KF 07 019KF 07 010

P15/150 S (reel 1 x 40 m)P15/350 S (reel 1 x 30 m)P15/500 S (reel 1 x 20 m)PSB 145 S (reel1 x 40 m)PSB 275 S (reel 1 x 30 m)PSB 275 S (reel 2 x 30 m)PSB 290S (reel 1 x 20 m)

G2G3G4G2G3G3G4

7.2005.4003.6007.2005.4005.4003.600

223222

2.5

225.00239.00256.00179.00163.00315.00140.00

• Filter foamCode Item Thickness (mm) €

“ESCOESP” Sheet 2 m2

• Polyurethane foam• Dimensions: 2x1 (2 m2)

KF 05 001KF 05 011KF 05 021KF 05 031KF 05 041

Tipo ESCOESP de 5/30Tipo ESCOESP de 10/20Tipo ESCOESP de 15/20Tipo ESCOESP de 20/20Tipo ESCOESP de 30/20

510152030

12.0023.0035.0047.0076.00



nd


S P&S P&

Note: Prices for special cuts tomeasure are NET prices.

Surplus cut-off material has tobe paid as well.

* Mat rolls:TRANSPORT is charged with

RECEIPT.

S I L ENT

KF FILTER UNITS

SLIMFILTER



nd


Code Item €

KF 51 500KF 51 510KF 51 520KF 51 530

Unit Slimfilter 300600 7/7 4P 1/5CVUnit Slimfilter 600600 9/9 4P 1/2CVUnit Slimfilter 600600 9/9 4P 3/4CVUnit Slimfilter 600600 10/10 4P 3/4CV

334.00393.00391.00413.00

FF

GG BB CC

DD

EE AA

Slimfilter A B C D x E F x G J H L M7/7 395 692 632 245 223 332 554 193 132 50 1309/9 695 692 632 312 270 630 554 160 140 160 130

10/10 695 692 632 343 300 630 554 145 169 120 130

Description: Filter units designed to take the the smallest space possible. Two fil-ters with a thickness of 48mm fit inside. Filters not included, to be chosen accor-ding to needs.

Technical specifications:

Slimfilter 300600 600600 600600 600600Code KF 51 500 KF 51 510 KF 51 520 KF 51 530Fan BP 7/7 BP 9/9 BP 9/9 BP 10/10Power 1/5 CV 1/2 CV 3/4 CV 3/4 CVNº poles 4 4 4 4Level (A) 1.00 3.80 5.00 5.90Nivel sonoro dB(A) 60 64 66 66Voltage 50Hz (V) 230 I 230 I 230 I 230 IChart 1 2 3 42 filters 292x592x48 mm 592x592x48 mm 592x592x48 mm 592x592x48 mm

• “SLIM” design• Easy installation• Single phase units• Insulated on the inside

IDA Inside air quality:1 Excellent ( Hospitals,

laboratories, nurseries)2 Good ( Offices, hotels,

classrooms)3 Medium ( malls, shopping

centers, cinemas, restaurants)4 Low

ODA Outside air quality:1 Pure (temporary with particles)2 Clean (concentration of

particles)3 Dirty (gaseous pollutants)4 Polluted (gaseous pollutants

and particles)5 Very polluted

IDA 1ª stage 2ª stage ODA1 F7 F9 1 to 42 F6 F8 1 to 43 F6 F7 1 to 54 G4 F6 1toa 5

Examples of possible filters to choose from:

Filter unit 300600 7/7 4P 1/5CV 600600 9/9 4P 1/2CV 600600 9/9 4P 3/4CV 600600 10/10 4P 3/4Flow (m³/h) 800 2000 2500 3000IDA 1 F7 F9 F7 F9 F7 F9 F7 F9Description FP 7 FP 9 FP 7 FP 9 FP 7 FP 9 FP 7 FP 9Code KF 02 822 KF 02 862 KF 02 820 KF 02 860 KF 02 820 KF 02 860 KF 02 820 KF 02 860Total initial Pa 115 205 218 270Available Pa 105 125 132 100RRP (€) 31,00 34.00 52.00 57.00 52.00 57.00 52.00 57.00IDA 2 F6 F8 F6 F8 F6 F8 F6 F8Description FP 6 FP 8 FP 6 FP 8 FP 6 FP 8 FP 6 FP 8Code KF 02 802 KF 02 842 KF 02 800 KF 02 840 KF 02 800 KF 02 840 KF 02 800 KF 02 840Total initial Pa 96 175 198 250Available Pa 124 155 152 120RRP (€) 29.00 32.00 49.00 54.00 49.00 54.00 49.00 54.00IDA 3 F6 F7 F6 F7 F6 F7 F6 F7Description FP 6 FP 7 FP 6 FP 7 FP 6 FP 7 FP 6 FP 7Code KF 02 802 KF 02 822 KF 02 800 KF 02 820 KF 02 800 KF 02 820 KF 02 800 KF 02 820Total initial Pa 85 150 168 210Available Pa 140 180 162 160RRP (€) 29.00 31.00 49.00 52.00 49.00 52.00 49.00 52.00IDA 4 G4 F6 G4 F6 G4 F6 G4 F6Description MP 4 FP 6 MP 4 FP 6 MP 4 FP 6 MP 4 FP 6Code KF 02 374 KF 02 802 KF 02 375 KF 02 800 KF 02 375 KF 02 800 KF02 375 KF 02 800Total initial Pa 70 108 138 157Available Pa 150 222 192 213RRP (€) 11.00 29.00 15.00 49.00 15.00 49.00 15.00 49.00

IN ACCOR-

DANCE WITH

EN13779REGULATIONS

KF FILTERING UNITS

COMPACT UF-STATION



nd


PRE-FILTRATIONoptional 1st and 2nd phase filtration

CHARACTERISTICS• Board type sandwich• Thermal and accoustic insulation• 2 filtering stages• Bilateral extraction gates• Pressurised fans

DESCRIPTIONThe UF_STATION COMPACT have been designed to comply with the regulations of RITE. Theseare composed of two modules: 1st and 2nd filtering stages in one of the modules and in the other,a set of ventilation. The filters of the 1st stage are flat, highly efficient and a 25 mm long and 96mmwide flange. The can be assembled along with the filters of the 2nd stage bags. If you assem-ble the filters in a single frame, these units are more compact than UF-STATION PURE.

Code KF51200 KF51210 KF51220 KF51230 KF51240UF-STATION COMPACT Nº1 Nº2 Nº3 Nº4 Nº5Min- max flow rate (m³/h) 200-1000 1800-2500 2000-3500 3000-5500 4000-6500

Fan BP 7/7 4P BP 9/9 4P BP 10/10 4P BP 12/9 6P BP 12/12 6PPower (W) 147 550 550 1100 2200Power (cv) 1/5 1/2 3/4 1.5 2

r.p.m. 1350 1350 1350 900 900Single-phase intensity 230V (A) 1.50 3.80 5.90 - -

Three-phase intensity 230/380V(A) - - - 7.0 / 4.2 7.0 / 4.0Sound pressure (dB) 59 66 67 70 71

Motor prtection IP55 IP55 IP55 IP55 IP55Sizes Wide x High x Long 700x450x900 700x750x900 700x750x900 950x700x1000 950x1100x1100

Filter setting per stage

PVP (€) 1,117.00 1,349.00 1,559.00 1,785.00 1,991.00

FILTER ASSEMBLY (ACCORDING TO RITE INDICATIONS)

IDA1 (F7+F9) KF 51 201 KF 51 211 KF 51 221 KF 51 231 KF 51 241PVP (€) 114.00 187.00 187.00 301.00 414.00

IDA 2 (F6+F8) KF 51 202 KF 51 212 KF 51 222 KF 51 232 KF 51 242PVP (€) 110.00 181.00 181.00 291.00 401.00

IDA 3 (F6+F7) KF 51 203 KF 51 213 KF 51 223 KF 51 233 KF 51 243PVP (€) 109.00 180.00 180.00 289.00 399.00

IDA 4 (G4+F6) KF 51 204 KF 51 214 KF 51 224 KF 51 234 KF 51 244PVP (€) 63.00 105.00 105.00 168.00 231.00

287 x 592 592 x 592 592 x 59228

7x

592

592 x 592

287 x 592

287

x59

2

592 x 592

IMPORTANT: The units do not include filters to increase versatility. Any filter in stock can be assembled. To choose a prefilter, see Ta-ble 1.2 and 2.1 respectively.

IN ACCOR-

DANCE WITH

EN13779REGULATIONS

RX ESCOCLIMA GRILLES• Return grille

WHITE lacquered aluminiumCode Item €

RX 02 033RX 02 035RX 02 037RX 02 039RX 02 041RX 02 043RX 02 044RX 02 045RX 02 046RX 02 047RX 02 049RX 02 051RX 02 055RX 02 057RX 02 059RX 02 061RX 02 065RX 02 067RX 02 077

Return grille RER 200 x 100Return grille RER 300 x 100Return grille RER 400 x 100Return grille RER 500 x 100Return grille RER 600 x 100Return grille RER 200 x 150Return grille RER 250 x 150Return grille RER 300 x 150Return grille RER 350 x 150Return grille RER 400 x 150Return grille RER 500 x 150Return grille RER 600 x 150Return grille RER 300 x 200Return grille RER 400 x 200Return grille RER 500 x 200Return grille RER 600 x 200Return grille RER 300 x 300Return grille RER 400 x 300Return grille RER 400 x 400

10.2811.9513.6815.3817.1011.5812.7513.6814.8815.7817.8219.9815.3517.8420.3522.8418.7022.0026.20

• Double deflection with clipWHITE lacquered aluminium

Code Item €

WITHOUT REGISTER

RX 02 081RX 02 083RX 02 085RX 02 086RX 02 088RX 02 090RX 02 093RX 02 095RX 02 097

Double deflection with clip REDD 300 x 100Double deflection with clip REDD 400 x 100Double deflection with clip REDD 500 x 100Double deflection with clip REDD 300 x 150Double deflection with clip REDD 400 x 150Double deflection with clip REDD 500 x 150Double deflection with clip REDD 300 x 200Double deflection with clip REDD 400 x 200Double deflection with clip REDD 500 x 200

12.1313.9515.7714.3016.6519.0516.3519.4022.40

WITHOUT REGISTER

RX 02 003RX 02 004RX 02 005RX 02 006RX 02 007RX 02 009RX 02 011RX 02 013RX 02 014RX 02 015RX 02 016RX 02 017RX 02 019RX 02 021RX 02 025RX 02 027RX 02 029

Double deflection with clip REDD+RG 200 x 100Double deflection with clip REDD+RG 250 x 100Double deflection with clip REDD+RG 300 x 100Double deflection with clip REDD+RG 350 x 100Double deflection with clip REDD+RG 400 x 100Double deflection with clip REDD+RG 500 x 100Double deflection with clip REDD+RG 600 x 100Double deflection with clip REDD+RG 200 x 150Double deflection with clip REDD+RG 250 x 150Double deflection with clip REDD+RG 300 x 150Double deflection with clip REDD+RG 350 x 150Double deflection with clip REDD+RG 400 x 150Double deflection with clip REDD+RG 500 x 150Double deflection with clip REDD+RG 600 x 150Double deflection with clip REDD+RG 300 x 200Double deflection with clip REDD+RG 400 x 200Double deflection with clip REDD+RG 500 x 200

18.7520.8822.3224.5025.8829.4833.1021.3023.5025.3028.0529.7534.2538.6528.3533.6538.95

• Ceiling rotatory diffuserWHITE lacquered aluminium

Code Item €

RX 01 101 Ceiling rotatory diffuser XN-60025+ pcs

100+ pcs

50.0045.00/pc40.00/pc




nd

(L - A) + 35

80

(L - A) + 35

27

59

5m

m

RP CIRCULAR DIFFUSERCode Item €

• WHITE lacquered aluminium diffuser• Black plastic damper• With assembly clip

RX 01 131RX 01 132RX 01 133RX 01 134RX 01 135

Diffuser Ø150 mmDiffuser Ø200 mmDiffuser Ø250 mmDiffuser Ø300 mmDiffuser Ø350 mm

20.0023.0029.0036.0045.00

FLEXIBLE MOUNTING FRAME

RX 01 141RX 01 142RX 01 143RX 01 144RX 01 145

Flexible mounting frame for diffuser DS D.150Flexible mounting frame for diffuser DS D.200Flexible mounting frame for diffuser DS D.250Flexible mounting frame for diffuser DS D.300Flexible mounting frame for diffuser DS D.350

4.004.405.006.008.00

PLASTIC EXTRACTION VALVECode Item €

RP 03 001RP 03 002RP 03 003RP 03 004

BALANCE E-100BALANCE E-125BALANCE E-150BALANCE E-200

8.6211.0813.5419.69

METALLIC EXTRACTION VALVECode Item €

RP 04 001RP 04 002RP 04 004RP 04 005

• Steel with white epoxy coatingValve SR-100Valve SR-125Valve SR-160Valve SR-200

7.259.50

11.7516.90

STAINLESS STEEL VALVES• VS series

Code Item €

• For air outlet and extraction• Air flow adjustable by turning the control disc• Includes mounting frame

RP 07 001RP 07 002RP 07 003RP 07 004

VS100VS125VS150VS200

12.5714.7918.7535.73

• VLA series

Code Item Q(4m/s)m3/h A B C D €

• For air outlet and extraction• With flyscreen, blades, fixing clips,

shut-off valve/rubber joints.• For interior and exterior use• Maximum air passing

RP 07 011RP 07 012RP 07 013RP 07 014

VLA100VLA125VLA150VLA200

6080125160

97120145195

150190210270

52526274

125145165205

13.8916.7420.6445.69




nd

Mounting frame

INCLUDESMOUNTING FRAME

Mounting frame

A

C

B

D

INCLUDESMOUNTING FRAME

CO UNIVERSAL REMOTE CONTROLFOR SPLITS

HF AIR FRESHENER TABLETS«CLIMA FRESH»

Code Item €

• Scented tablets to put inside air conditioners• Barely visible, to be placed inside the split or fancoil

HF 18 401HF 18 402HF 18 403HF 18 404

Red colour (FRESH AIR scent)Yellow colour (VANILLA scent)Purple colour (WELLBEING scent)Green colour (GREEN APPLE scent)

2.202.202.202.20

HF 18 400 Carton display case• Display with 10 tablets each (total 40) 84.00



nd


BRANDSALPIN LG

CARRIER MACQUAYCORONA MIDEA

CHANG HONG MITSUBISHICHIGO MUNDOCLIMACHOFU PANASONICDAIKIN PANDA

DONG BAO PHILCOELECTROLUX RAYBO

FUJITSU SAMPOGOLDSTAR SAMSUNG

GREE SANYOGUQIAO SHARPHAIER SHINCO

HITACHI SHUANGLUHUAO BAO SOVAHUIFENG TOSHIBAHYUNDAI TRANE

JDC WHIRLPOOLJOHNSON XILENGKLIMATAIR YORK

It allows to control the majority of the splits. It is required to select the brandcode of the equipment.

Code Item €

CO 14 903 Universal remote control 50.00KT-508

ON/OFFTOO

WARMTOOCOOL

23332

°C

AUTOSET

MODEL

MODE

FAN

SEL TMR ON

ENTER

RESET CLOCK

TIME/CODE TMR OFF

SWING DIR

Fan

Heating

Fan speedAUTO-high-medium-low

Swing indicator

IEmission indicator

Press once to increasetemperature 1°C

Press once to decreasetemperature 1°C

Air flow direction button

Timer on

Timer off

Automatic air flow button

Insert pencil end to settime on clock

Increase(+) / Decrease (-)code or time

Insert pencil endto reset values

and select model again

Auto mode

Cooling

Drying

Code

Temperature

Mode selection button

On/Off Button

Air flow selection button

Code selection button

Confirmation button



nd


CL WINDOW AIR CONDITIONERS• Manual control (R-410A)

Code Model CAPACITY (W)€Cool Heat

HEAT PUMP

CL 20 386CL 20 387CL 20 388

MUV-09HE2MUV-12HE2MUV-18HE2

2.6003.5005.200

2.6003.5005.200

470.00575.00743.00

(*) Units as per R.A.E (3.00 €)

WALL SPLIT 1x1 (R-410A)

• MUP-HK series

Code ModelCAPACITY (W)

€Cool Heat

HEAT PUMP

CL 20 722CL 20 726CL 20 724CL 20 725

MUP-09-HKMUP-12-HKMUP-18-HKMUP-24-HK

2.6403.4505.0506.800

2.8203.6205.3507.200

435.00465.00746.00

1,005.00

(*) Units up to 12 Kw as per R.A.E (3.00 €)

• Silver Cristal “Luxury” series


€Cool Heat

HEAT PUMP

CL 20 713CL 20 714

MUP-12HJMUP-18HJ

3.5005.200

3.8006.000

575.00865.00


WALL MOUNTED MULTI-SPLIT 2x1 (R-410A)


€Cool Heat

HEAT PUMP

CL 20 157 MUP-12X2HG 3.500 x 2 3.600 x 2 1,424.00


WALL SPLIT “INVERTER” (R-410A)• MUPR-HG series


HEAT PUMP

CL 20 161CL 20 162CL 20 167CL 20 169

MUPR-09HGMUPR-12HGMUPR-18HGMUPR-24HG

2.5003.5005.2756.450

2.8003.9005.8507.000

645.00685.00

1,045.001,365.00




nd


CL MULTI SPLITS “INVERTER”2x1, 3x1, 4x1 and 5x1

• Indoor units


€Cool Heat

SPLIT WALL

CL 20 421CL 20 422CL 20 423CL 20 424

MUPR-07 HLMMUPR-09 HLMMUPR-12 HLMMUPR-18 HLM

2.0002.5003.5005.000

2.3002.9003.7005.500

195.00202.00206.00235.00

SPLIT CASSETTE

CL 20 425CL 20 426CL 20 427CL 20 428

MUCSR-07 HLMMUCSR-09 HLMMUCSR-12 HLMMUCSR-18 HLM

2.0002.5003.5005.000

2.3002.9003.7005.500

610.00626.00710.00792.00

SPLIT FLOOR/CEILING

CL 20 429CL 20 430CL 20 431

MUCNR-09 HLMMUCNR-12 HLMMUCNR-18 HLM

2.0002.5003.500

2.3002.9003.700

316.00322.00343.00

SPLIT DUCT

CL 20 432CL 20 433CL 20 434CL 20 435

MUCR-07 HLMMUCR-09 HLMMUCR-12 HLMMUCR-18 HLM

2.0002.5003.5005.000

2.3002.9003.7005.500

498.00509.00548.00582.00


• Outdoor units


€Cool Heat

OUTDOOR UNITS

CL 20 412CL 20 413CL 20 415CL 20 416

MUPR-18-HL2 2x1MUPR-27-HL3 3x1MUPR-28-HL4 4x1MUPR-36-HL5 5x1

5.0007.8007.80010.400

6.1008.7008.70011.600

1,411.001,707.002,070.002,422.00




nd


Cassette

Duct

Wall

Outdoor units

INVERTERGREAT ENERGETIC SAVING!

Console

CL SPLIT FLOOR-CEILING (R410A)


€Cool Heat

HEAT PUMP

CL 20 623CL 20 624CL 20 625CL 20 626CL 20 627CL 20 628

MU S/T 18HFMU S/T 24HFMU S/T 30HFMU S/T 36HFMU S/T 48HFMU S/T 60HF

5.2757.0348.79210.55114.06817.585

5.5698.0269.38011.72315.53319.930

1,200.001,506.001,960.002,085.002,510.002,788.98


SPLITS CASSETTE (R-410A)


€Cool Heat

MODEL 600 x 600

CL 20 632 MUCS-18HF (220V II) 5.275 6.008 1,350.00

MODEL 900 x 900

CL 20 634CL 20 635CL 20 636CL 20 637

MUCS-24HF (220V II)MUCS-30HF (220V II)MUCS-36HF (220V II)MUCS-48HF (380V III)

7.0348.79210.55114.068

8.0269.38011.72315.533

1,798.002,395.002,492.002,800.00


SPLITS CASSETTE INVERTER (R410A)


€Cool Heat

MODEL 600 x 600

CL 20 673 MUCSR-18HF (220V II) 5.300 6.000 1,790.00

MODEL 900 x 900

CL 20 674CL 20 675CL 20 676CL 20 677

MUCSR-24HF (220V II)MUCSR-30HF (220V II)MUCSR-36HF (220V II)MUCSR-48HF (220V II)

7.1009.00010.50014.000

7.6009.50012.50015.500

2,230.002,815.003,599.003,974.00




nd


CL SPLIT FLOOR STANDING (R410A)


HEAT PUMP

CL 20 756CL 20 757CL 20 758

MUCO-36HGMUCO-48HGMUCO-70HG

10.56014.00020.500

10.77014.36020.920

1,965.002,745.003,351.00

SPLIT DUCT (R410A)Code Model

CAPACITY (W)€Cool Heat

HEAT PUMP "SUPER SLIM"

CL 20 763CL 20 764CL 20 765

MUC-18HGMUC-24HGMUC-36HG

5.2708.800

10.560

5.3808.970

10.770

988.001,250.001,750.00

HEAT PUMP

CL 20 775CL 20 776

MUC-30HG2MUC-36HG2

8.80010.560

8.97010.770

1,600.001,875.00

HEAT PUMP

CL 20 643CL 20 644CL 20 645CL 20 646CL 20 647CL 20 648

MUC-18HF2MUC-24HF2MUC-30HF2MUC-36HF2MUC-48HF2MUC-60HF2

5.2757.0348.792

10.55114.06817.585

6.1558.0099.38011.72315.53319.930

1,226.001,552.001,984.002,155.002,540.002,775.00

HEAT PUMP (R-410A) INVERTER DC

CL 20 653CL 20 654CL 20 655CL 20 656CL 20 657CL 20 658

MUCR-18HF2MUCR-24HF2MUCR-30HF2MUCR-36HF2MUCR-48HF2MUCR-60HF2

5.3007.1009.00010.50014.00016.000

6.0007.6009.50012.50015.50017.500

1,843.002,385.002,841.003,236.003,574.003,840.00

CENTRIFUGAL OUTDOOR UNIT (R410A)Code Model Cool Heat €

HEAT PUMP (R-410A)

UE 20 603UE 20 604UE 20 605UE 20 606

MUEC-18 HF R410A 220 IMUEC-24 HF R410A 220 IMUEC-30 HF R410A 220 IMUEC-36 HF R410A 220 I

5.2007.0008.70010.500

6.0008.0009.20011.700

1,236.081,542.531,815.501,926.23

COMPATIBLE INDOOR UNITS

• Duct Indoor Unit HF2

UI 20 643UI 20 644UI 20 645UI 20 646

MUC-18 HF2 220 IMUC-24 HF2 220 IMUC-30 HF2 220 IMUC-36 HF2 220 I

5.2757.0348.79210.551

6.1558.0099.38011.723

490.40620.80793.60862.00

• Floor-ceiling Indoor Unit HF

UI 20 623UI 20 624UI 20 625UI 20 626

MUST-18HF 220 IMUST-24HF 220 IMUST-30HF 220 IMUST-36HF 220 I

5.2757.0348.792

10.551

6.1558.0099.38011.723

480.00602.40784.00834.00

• Cassette Panel HF

UA 20 632UA 20 634UA 20 635UA 20 636

Panel MUCS-18HF 220 IPanel MUCS-24HF 220 IPanel MUCS-30HF 220 IPanel MUCS-36HF 220 I

135.00179.80239.50249.20

• Cassette Indoor Unit HF

UI 20 632UI 20 634UI 20 635UI 20 636

MUCS-18HF 220 IMUCS-24HF 220 IMUCS-30HF 220 IMUCS-36HF 220 I

5.2757.0348.792

10.551

6.1558.0099.38011.723

405.00539.40718.50747.60



nd


Cassette HFconsists of 2 piecesPanel (UA) + Unit (UI)

(*) Units up to 12 kWas per RAE (3,00 €)


CL WALL CONDITIONERWITHOUT OUTDOOR UNIT

Code ModelCAPACITY (W)**

€Cool (W) Heat (W)

• Hole Ø: 162 mm• Remote control and front display• Anti-odour and anti-bacterial filter (only mod. 32)• On board control (only mod. 32)• Gas: R-410A

CL 19 781CL 19 782

MU-WZ25MU-WZ32

2.4602.780

3.2503.830

1,100.001,580.00

• Hole Ø: 153 mm• Night function button (silence)• Automatic removal of condensed water (cooling model)• Infrared remote control• Gas: R-410A

CL 19 742 MU-UNIC 8,5 C 2.100 – 1,150.00


MONOBLOC PORTABLE CONDITIONER

Code ModelCAPACITY (W)*

€Cool (W) Heat (W)

• With outdoor discharge tube• Automatic removal of condensed water• Fan function• Dehumidification

CL 20 096CL 20 095

MU-PO 08 CG SuperEco II (R-410C)MU-PO “Eco” (R410A)

2.3403.500

–2.400

425.00750.00




nd


MU-PO Eco MU-PO SuperEco II

MU-UNIC

MU-WZ

Follow us on the

• Facebook• Twitter• BlogAccess the networkby clicking the iconsat our website.

SOCIAL NETWORKS:

www.salvadorescoda.com

CL VARIABLE DIGITAL SCROLL• Gas: R410A


€Cool HeatOUTDOOR UNIT

CL 23 009

CL 23 010CL 23 011CL 23 012CL 23 013CL 23 014

• Single phase 230VMVD-D140W/CSN1 5HP(*)• Three phase 230/380V IIIMVD-D252W/CSN1 8HP(*)MVD-D280W/CSN1 10HPMVD-D335W/CSN1 12HP(*)MVD-D400W/CSN1 14HPMVD-D450W/CSN1 16HP(*)

1425,228

33,54045

1627

31,5354347

5,134.00

8,773.0010,043.0011,065.0013,623.0014,891.00

OUTDOOR UNIT 3 PIPES WITH HEAT RECOVERY

CL 23 015CL 23 016CL 23 090CL 23 091

MVD-T252W/DSN1MVD-T280W/DSN1Distributor MS < 5,6 kWDistributor MS ≥ 5,6 kW

25,228

2731

10,501.0011,300.00

228.00255.00

CASSETTE INDOOR UNIT

CL 23 021CL 23 022CL 23 023CL 23 024CL 23 025CL 23 026CL 23 027CL 23 028

MVD-D28Q4/N1-AMVD-D36Q4/N1-AMVD-D45Q4/N1-A(*)MVD-D56Q4/N1-AMVD-D71Q4/N1-A(*)MVD-D80Q4/N1-AMVD-D90Q4/N1-AMVD-D112Q4/N1A(*)

2,83,64,55,67,189

11,2

2,93,95,25,87,89

9,612,7

887.00918.00970.00

1,016.001,238.001,264.001,310.001,581.00

DUCT INDOOR UNIT

CL 23 030CL 23 031CL 23 032CL 23 033CL 23 034CL 23 035CL 23 036CL 23 037CL 23 038CL 23 039CL 23 049CL 23 050CL 23 040

MVD-D22T3/N1-A3MVD-D28T3/N1-A3MVD-D36T3/N1-A3(*)MVD-D45T2/N1-A3MVD-D56T2/N1-A3MVD-D71T2/N1-A3(*)MVD-D80T2/N1-A3MVD-D90T2/N1-A3MVD-D112T2/N1-A3MVD-D140T2/N1-A3(*)MVD-D200T1/N1MVD-D250T1/N1MVD-D280T2/N1-C(*)

2,22,83,64,55,67,189

11,214202528

2,32,93,95,25,87,89

9,612,715,1222629

908.00939.00970.00

1,187.001,218.001,251.001,287.001,393.001,522.001,566.002,055.002,095.002,156.00

WALL / FLOOR INDOOR UNIT


MVD-D36DL/N1MVD-D45DL/N1MVD-D56DL/N1(*)MVD-D71DL/N1MVD-D80DL/N1(*)MVD-D90DL/N1MVD-D112DL/N1MVD-D140DL/N1(*)

3,64,55,67,189

11,214

3,95,25,87,89

9,612,715,1

820.00839.00854.00893.00929.00970.00

1,060.001,145.00

WALL INDOOR UNIT

CL 23 051CL 23 052CL 23 053CL 23 054CL 23 055

MVD-D22G/N1-E1MVD-D28G/N1-E1(*)MVD-D36G/N1-E1(*)MVD-D45G/N1-E1(*)MVD-D56G/N1-E1(*)

2,22,83,64,55,6

2,32,93,95,25,8

552.00573.00677.00684.00707.00

WALL UNIT PREMIUM

CL 23 081CL 23 082CL 23 083CL 23 084CL 23 085

MVD-D22G/BN1-EMVD-D28G/BN1-EMVD-D36G/BN1-EMVD-D45G/BN1-EMVD-D56G/BN1-E

2,22,83,64,55,6

2,32,93,95,25,8

554.00572.00607.00694.00713.00

INDOOR UNIT WITH CASING

CL 23 060CL 23 061CL 23 062CL 23 063CL 23 064CL 23 065CL 23 066

MVD-D22Z/N1-F1(2)MVD-D28Z/N1-F1(2)MVD-D36Z/N1-F1(2)MVD-D45Z/N1-F1(2)MVD-D56Z/N1-F1(2)MVD-D71Z/N1-F1(2)MVD-D80Z/N1-F1(2)

2,22,83,64,55,67,18

2,32,93,95,25,87,89

697.00768.00837.00895.00970.00

1,030.001,083.00

INDOOR UNIT WITHOUT CASING

CL 23 070CL 23 071CL 23 072CL 23 073CL 23 074CL 23 075CL 23 076

MVD-D22Z/N1-F3MVD-D28Z/N1-F3MVD-D36Z/N1-F3MVD-D45Z/N1-F3MVD-D56Z/N1-F3MVD-D71Z/N1-F3MVD-D80Z/N1-F3

2,22,83,64,55,67,18

2,32,93,95,25,87,89

641.00737.00808.00856.00949.00948.00

1,058.00



nd


MVDMVDMVDMVD

Duct

Floor / Wall

Wall

Indoor unit with casing

Indoor unit without casing

Cassette 4 ways

Outdoor units

(*) Suggested models as perstock availability

MVDMVDMVDMVD

SALVADOR ESCODA S.A.® TECHNICAL BROCHUREwww.salvadorescoda.com MANUALS, CATALOGUES AND TECHNICAL BROCHURE AVAILABLE IN OUR WEBSITE


nd


CL WINDOW AIR CONDITIONER

MUV “Eco2” Series

• MANUAL CONTROL• Compact design• Reduced power requeriment• Very quiet• Easy installation• 3 Operating speeds• Thermostat included• Rotary compressor• Centrifugal fan

TECHNICAL SPECIFICATIONS:

Model MUV-09HE2 MUV-12HE2 MUV-18HE2

Code CL 20 386 CL 20 387 CL 20 388

Gas R-410A R-410A R-410A

COOLING capacity W 2.600 3.500 4.600

HEATING capacity W 2.600 3.500 4.600

Power supply V-Hz-Ph 220-50-1 220-50-1 220-50-1

Power requeriment during COOLING W 1.050 1.450 1.700

Power requeriment during HEATING W 880 1.250 1.550

EER W/W 2.51 2.51 276

COP W/W 3.0 281 30

Indoor air flow m3/h 420 460 650

Noise level dB(A) 45 47 50

Dimensions

width mm 452 600 660

height mm 342 380 430

depth mm 550 560 687

Net weight Kg 31 38 53

Gross weight Kg 36 41 62

Low noise Easy installationpanel

Fresh Airintake

Movingstructure

Double drainsystem

Large air flow

GASR410A

Control panel



nd


CL WALL SPLIT 1 x 1

MUP-HK Series

• Operating up to -7°C

• Biological anti-odour filter

• Sleep mode

• Automatic restart

• Reduced dimensions

Model MUP-09HK MUP-12HK MUP-18HK MUP-24HK

Code CL 20 722 CL 20 726 CL 20 724 CL 20 725

Power supply V-Hz 220-240/50 220-240/50 220-240/50 220-240/50

Heating

Capacity W 2820 3620 5350 7200

Power consumption W 780 1000 1380 1990

Nominal current A 3,54 4,42 6,50 8,64

COP 3,61 3,62 3,87 3,62

Cooling

Capacity W 2640 3450 5050 6800

Power consumption W 800 1050 1500 2050

Nominal current A 3,73 4,56 6,64 8,64

EER 3,30 3,29 3,37 3,32

Maximum consume W 1000/1120 1450/1400 1980/1980 2600/2700

Maximum current A 4,5/5,1 6.3/6.1 10/10 11,3/11,7

Starting current A 20,9 23 32 40

Indoor unit

Air flow (Turbo/Hi/Mi/Lo) m3/h 500/400/330/280 500/400/330/280 850/750/650/550 850/780/650/550

Dehumidification (L/h) 0,8 1,0 1,8 3,0

Noise level (Hi/Me/Lo) dB(A) 37/35/32 38/35/32 45/41/37 45/41/38

Dimens. (W x H x D) mm 730x255x174 790x265x170 940x298x200 940x298x200

Net weight Kg 8 9 13 13

Indoor unit

Noise level dB(A) 50 52 55 56

Dimens.(W x H x D) mm 785x540x320 798x540x320 848x540x320 913x680x378

Net weight Kg 31 35 40 46

Gas charge Kg 0,76 0,84 1,15 1,45

Pipe

Liquid pipe mm 1/4” 1/4” 1/4” 1/4”

Gas pipe mm 3/8” 3/8” 1/2” 1/2”

Maximum pipe length m 20 20 20 20

Maximum pipe distance m 10 10 10 10

Working temperature °C -7/43°C -7/43°C -7/43°C -7/43°C

AABBCCDD

A ENERGETICEFFICIENCYCLASS “A”

GASR410A

AABB

CCDD

A

EEFF

GG

Energy Air-Conditioning

SALVADOR ESCODA S.A.

Higher efficiency

MUP-09HKCL20722

Lower efficency

Yearly energy useKwh for cooling mode

Production of cooling KWEnergy efficiency rate

For more informationread this product instructions

Heat production KW

Heat options

(The consumption rate depends on how the device is used)

Complete load (the higher tthe better)

Norm EN 14511Air-conditioning

European guidelines about energy label 2002/31/EC

Mode Only cold

Noise

Cooling+heatingCold airCold water

A: high G: low

(dB(A)re 1pW)

RoHs

400

2.82

50

2.643.30

A B C D E F G

AABB

CCDD

A

EEFF

GG

Energy Air-Conditiong


Higher efficiency

MUP-12HKCL20723

Lower efficiency


Production of cooling KWEnergy efficiency rate

For more information, pleaseread this product’s instructions

Heat production KW

Heat options

(The use depends on how the device is used )

Complete load (the higher the better)

Regulation EN 14511Air-Conditioning

European guidelines about energy 2002/31/EC

Mode Only cooling

Noise


A: high G: low

(dB(A)re 1pW)

RoHs

525

3.62

52

3.453.29

A B C D E F G

AABB

CCDD

A

EEFF

GG



Higher efficiency

MUP-18HKCL20724

Lower efficiency

Yearly energy useKwh in cooling mode

Cooling production KWEnergy efficiency ratio

For more information, pleaseread this product’s instructions.

Heat production KW

Heat options



Guidelines EN 14511Air-conditioning

European guidelines about energy 2002/31/EC

Mode Only cooling

Noise


A: high G: low

(dB(A)re 1pW)

RoHs

750

5.35

55

5.053.37

A B C D E F G

AABB

CCDD

A

EEFF

GG



Higher efficiency

MUP-24HKCL20725

Lower efficiency




Heat production KW

Heat options



Guidelines EN 14511Air-conditioning

European Guidelines about energy 2002/31/EC

Mode Only cooling

Noise


A: high G: low

(dB(A)re 1pW)

RoHs

1025

7.20

56

6.803.32

A B C D E F G



nd


CL WALL SPLIT 1 x 1

MUP-HJ “Silver Cristal” Series

• A Class Energy Efficiency• Low noise• Compact Design• Easy to install

MODELSHEAT PUMP

REFRIGERANTR-410A ENVIRONMENT

FRIENDLY

Model MUP-12 HJ MUP-18 HJCode CL 20 713 CL 20 714

Cooling CapacityW 3.500 5.200BTU/h 12.000 18.000

Heating CapacityW 3.800 6.000BTU/h 13.000 20.400

Power supply V/Hz/Ph 220-240 / 50 / 1 220-240 / 50 / 1Power consumption Cooling W 1.090 1.615Power consumption Heating W 1.065 1.650E.E.R. W/W 3.21 3.22C.O.P. W/W 3.62 3.64Noise level Indoor unit (L/M/H) dB(A) 24/27/30 27/30/33Noise power Outdoor unit (L/M/H) dB(A) 34/37/40 37/40/43Outdoot noise level dB(A) 52 56Air flow m3/h 380/450/500 650/700/850Dehumidification l/h 1.2 2.2Indoor unit dimensions mm 800 x 290 x 186 860 x 293 x 203Outdoor unit dimensions mm 790 x 540 x 245 845 x 680 x 310Net weight Indoor unit Kg 10 11Net weight Outdoot unit Kg 40.5 55Gas pre-charge m 4 4Extra charge g/m 15 35Maximum uneveness between units m 5 10Maximum distance between units m 10 20Working temperature °C -8<T<48 -8<T<48Liquid pipe inch 1/4" 1/4"Gas pipe inch 1/2" 1/2"

A

MUP-18HJCL20714


Producción de frío KWRatio de eficiencia energética

Para más información,lea el folleto del producto

Producción de calor KW

Opciones de calor

(The consumption rate depends on how the device is used and the weather)

Carga completa (cuanto más alto, mejor)

Norma EN 14511Aire-acondicionado

Directiva Comunitara sobre etiqueta energética 2002/31/EC

Tipo Sólo frío

Bruit

Frío + calorAire fríoAgua fría

A: alto G: bajo

(dB(A)re 1pW)

RoHs

803.5

6.00

56

5.203.22

A B C D E F G

Energy Air-Conditionning


AABBCC

DDEE

FFGG

Higher efficiency

Lower efficiency

AABBCC

DD

A

EEFF

GG



Higher efficiency

MUP-12HJCL20713

Lower efficiency



For more information, pleaseread the instruction’s product

Heat production KW

Heat options


Complete load (the higher, the better)

Regulations EN 14511Air-Conditionning

Guidelines about energy labelling 2002/31/EC

Mode Only cooling

Noise

Cooling+ HeatingCold airCold water

A: high G: low

(dB(A)re 1pW)

RoHs

564.5

3.80

3.503.21

A B C D E F G

52

GASR410A



nd


CL WALL MOUNTED MULTI-SPLIT 2x1

MUP Series

• High energetic efficiency• Anti-Corrosion treatment• Long life hydrophilic aluminium• Automatic restart• Particularly quiet• Programmable operation• Infrared remote control• Independent operation: one unit

cools while the other one heats

GASR410A

MUP-12X2HGCL20157

1163

3.80X2

48

3.50X23.01




Heat production KW

Heat options



Regulations EN 14511Aire-acondicionado


Mode Only cooling

Noise


A: high G: low

(dB(A)re 1pW)

RoHs



AABBCC

DDEE

FFGG

Higher efficiency

Lower efficiency

A C D E F GB

B

Model MUP-12x2HG

Code CL 20 157

COOLING Capacity

W 3.500 x 2

Btu/h 12.000 x 2

Kcal/h 3.000 x 2

HEATING Capacity

W 3.600 x 2

Btu/h 13.000 x 2

Kcal/h 3.100 x 2

Power consumptionCooling W 2.325

Heating W 2.111

Dehumidification Lts/h 1,2 x 2

Air flow m3/h 630 x 2

EER / C.O.P. w/w 3,01/3,41

Volt-Phases-Frequency V-Hz-Ph 230 - 50 - 1

Energy label (cooling/heating) B/B

Outdoor unit compressorMitsubishi

RN135VHEMC

Noise levelIndoor unit dB(A) 38/34/29

Outdoot unit dB(A) 66

Dimensions (W x H x D)Indoor unit mm 845 x 275 x 180

Outdoot unit mm 950 x 420 x 700

WeightIndoor unit kg 10

Outdoot unit kg 65

Gas pre-charge m 4

Extra charge g/m 30

Gas pipe diameter inch. 1/2" x 2

Liquid pipe diameter inch. 1/4" x 2

Cooling line max. distance m 20

Uneveness max. m 10



nd


CL WALL 1x1 INVERTER SPLIT

MUPR-HG Series

• DC Inverter Compressor

• 40% Energy saving

• Turbo Mode

• Operation up to -10°C

• Anti-odour Bio Filter

• DSD Controller

• Sleep Mode

• Anti-Corrosion treatment

• Long life hydrophilic Aluminium

• Automatic restart

• Infrared remote control

TECHNICAL SPECIFICATIONS:Model MUPR-09HG MUPR-12HG MUPR-18HG MUPR-24HGCode CL 20 161 CL 20 162 CL 20 167 CL 20 169

Cooling CapacityW 3.100/2.500/1.180 3.800/3.500/1.220 5.600/5.200/1.300 6.976/6.450/1.400Btu/h 10.600/9.000/4.036 12.970/12.000/4.172 19.100/17.750/4.436 24.000/22.200/4.800

Heating CapacityW 3.800/2.750/1.200 4.740/4.000/1.310 6.600/5.750/1.250 8.200/6.976/1.200Btu/h 13.000/9.386/4.096 14.660/13.650/4.480 22.550/19.600/4.260 28.000/24.000/4.100

Power consumption Cooling W 1.330/730/280 1.560/1.060/295 2.100/1.520/400 2.500/1.985/350Power consumption Heating W 1.365/745/310 1.420/1.100/330 2.200/1.580/370 2.700/1.930/350Energy Efficiency Class A/A A/A A/A A/AAir flow m3/h 500 560 830 900Dehumidification l/h 1.2 1.6 2.0 2.4Power supply V/Ph/Hz 220-240V 220-240V 220-240V 220-240VNoise level Indoor unit H/M/L (*) dB(A) 37/31/23 37/33/24 45/42/38 44/43/40Noise power Indoor unit H/M/L (*) dB(A) 47/41/33 47/43/34 55/52/48 58/53/50Noise level Outdoor unit H/M/L (*) dB(A) 54/52/50 54/52/50 56/54/52 58/55Noise power Outdoor unit H/M/L (*) dB(A) 64/62/60 64/62/60 66/64/62 68/65Gas and Charge R410A / 0.8 R410A / 1.15 R410A / 1.60 R410A / 2.4Gas pre-charge g/m 4 4 5 5Extra Gas Charge m 15 15 50 50Indoor unit Dimensions (W x H x D) mm 790x265x170 845x275x180 940x298x200 1060x330x219Outdoor unit Dimensions (W x H x D) mm 848x260x540 848x260x540 846x300x685 955x700x424Indoor/Outdoor units weight Kg 9/35 11/36 13/52 13/68

Maximum distance between unitsHigh (m) 5 5 10 10Long (m) 10 10 30 30

Gas pipe diameter inch 1/4" 1/4" 1/4" 1/4"Liquid pipe diameter inch 3/8" 3/8" 1/2" 1/2"

(*) Noise level to maximum speed (1 m distance)

ENERGY SAVING: Compressor speed and refrigerant volume automatically controlled according to the enviroment.


AABBCCDD

A ENERGETICEFFICIENCYCLASS “A”

GASR410A

AABB

CCDD

A

EEFF

GG

Energía Air-Conditionning


Higher efficiency

MUPR-09HGCl20165

Lower efficiency


Cooling production KWEnergy efficiency rate


Heat production KW

Heat options



Regulations EN 14511Aire-acondicionado


Mode Only cooling

Noise


A: high G: low

(dB(A)re 1pW)

RoHs

367.50

2.75

54

2.503.40

A B C D E F G

AABB

CCDD

A

EEFF

GG

Energy Air-Conditionning


Higher efficiency

MUPR-12HGCl20166

Lowe efficiency


Cooling prduction KWEnergy efficiency ratio

For more information, pleaselread this product’s instructions

Heat production KW

Heat options



Regulations EN 14511Air-conditioning


Mode Only cooling

Noise


A: high G: low

(dB(A)re 1pW)

RoHs

530

4.00

54

3.503.30

A B C D E F G

AABB

CCDD

A

EEFF

GG



Higher efficiency

MUPR-18HGCl20167

Lower efficiecny




Heat production KW

Heat options





Mode Only cooling

Noise


A: high G: low

(dB(A)re 1pW)

RoHs

800

5.85

56

5.283.29

A B C D E F G

AABB

CCDD

A

EEFF

GG



Higher efficiency

MUPR-24HGCl20168

Lower efficiency



For more information, pleaseread the product’s instructions

Heat production KW

Heat options

(The consumption rate depends on how the device is used and the climate)




Mode Only cooling

Noise


A: high G: low

(dB(A)re 1pW)

RoHs

993

7.00

58

6.453.24

A B C D E F G

CL MULTI INVERTER SYSTEM2x1, 3x1, 4x1, 5x1

• Indoor UnitsWALL SPLIT MUPR-07 MUPR-09 MUPR-12 MUPR-18Code CL 20 421 CL 20 422 CL 20 423 CL 20 424

COOLING W 2.000 2.500 3.500 5.000

HEATING W 2.300 2.900 3.700 5.500

Air flow m3/h 450 450 550 750

Noise Level dB(A) 37/30/27 37/30/27 45/42/33 46/43/34

Dimensions (W x H x D) mm 710x250x189 710x250x189 790x275x190 940x275x198

Weight kg 7 7 8.5 11

Pipe diameter liquid/gas 1/4" - 3/8" 1/4" - 3/8" 1/4" - 1/2" 1/4" - 1/2"

4 WAY CASSETTE SPLIT MUCSR-07 MUCSR-09 MUCSR-12 MUCSR-18Code CL 20 425 CL 20 426 CL 20 427 CL 20 428

COOLING W 2.000 2.500 3.500 5.000

HEATING W 2.300 2.900 3.700 5.500

Air flow m3/h 580 580 580 750

Noise Level dB(A) 42/38/32 42/38/32 42/38/32 44/39/33

Dimensions (W x H x D) mm 575x260x575

Dimensions (W x H x D) mm 647x50x647

Net Weight unit kg 16 16 16 18

Net Weight panel kg 3 3 3 3

Pipe diameter liquid/gas 1/4" - 3/8" 1/4" - 3/8" 1/4" - 1/2" 1/4" - 1/2"

SPLIT CONSOLE MUCNR-09 MUCNR-12 MUCNR-18Code CL 20 429 CL 20 430 CL 20 431COOLING W 2.500 3.500 5.000HEATING W 2.900 3.700 5.500Air flow m3/h 450 450 630Noise Level dB(A) 37/32/28 37/32/28 45/42/35Dimensions (W x H x D) mm 700x600x210Weight kg 13 15 15Pipe diameter liquid/gas 1/4" - 3/8" 1/4" - 1/2" 1/4" - 1/2"

DUCT SPLIT MUCR-07 MUCR-09 MUCR-12 MUCR-18Code CL 20 432 CL 20 433 CL 20 434 CL 20 435COOLING W 2.000 2.500 3.500 5.000HEATING W 2.300 2.900 3.700 5.500Air flow m3/h 680 680 680 870Noise Level dB(A) 48/45/41 48/45/41 48/45/41 48/44/40Dimensions (W x H x D) mm 870x210x385 870x210x385 870x210x385 1224x210x385Weight kg 15 15 15 18Pipe diameter liquid/gas 1/4" - 3/8" 1/4" - 3/8" 1/4" - 1/2" 1/4" - 1/2"

• Outdoor UnitsModel 2x1 3x1 4x1 5x1Code CL 20 412 CL 20 413 CL 20 415 CL 20 416COOLING W 5.000 7.800 7.800 10.400HEATING W 6.100 8.700 8.700 11.600Power supply V-Hz-Ph 220-240-50 220-240-50 220-240-50 220-240-50Power W 1620/1670 2400/2420 2470/2440 3480/3430Maximum current A 7,5/7,6 11/11,2 11,2/11,1 15,6/15,4EER/COP 3,21/3,65 3,25/3,63 3,21/3,61 3,03/3,42Dimensions mm 845x695x335 845x695x335 895x860x395 990x966x396Net/Gross Weight kg 53,5/57 57/60,5 78/82 88/92Air flow m3/h 2.500 2.500 3.500 5.800Noise Level dB(A) 53 55 57 61Pipe Ø liquid/gas 2x(1/4" - 3/8") 3x(1/4" - 3/8") 4x(1/4" - 3/8") 5x(1/4" - 3/8")



nd


4 way Cassette

Wall

Console

Duct



nd


OUTDOOR UNIT ONE UNIT TWO UNITS

2x1 modelCode: CL 20 412

7 7 + 7 9 + 99 7 + 9 9 + 1212 7 + 12 12 + 1218 7 + 18

OUTDOOR UNIT ONE UNIT TWO UNITS THREE UNITS


7 7 + 7 9 + 9 12 + 18 7 + 7 + 7 7 + 9 + 9 9 + 9 + 129 7 + 9 9 + 12 7 + 7 + 9 7 + 9 + 12 9 + 12 + 1212 7 + 12 9 + 18 7 + 7 + 12 7 + 12 + 1218 7 + 18 12 + 12 7 + 7 + 18 9 + 9 + 9

OUTDOOR UNIT ONE UNIT TWO UNITS THREE UNITS FOUR UNITS


7 7+7 9+9 12+18 7+7+7 7+9+9 7+12+18 9+12+12 7+7+7+7 7+7+9+9 7+9+9+129 7+9 9+12 18+18 7+7+9 7+9+12 9+9+9 9+12+18 7+7+7+9 7+7+9+12 7+9+12+1212 7+12 9+18 7+7+12 7+9+18 9+9+12 12+12+12 7+7+7+12 7+7+12+12 9+9+9+918 7+18 12+12 7+7+18 7+12+12 9+9+18 7+7+7+18 7+9+9+9 9+9+9+12

• Combinations 5x1:OUTDOOR UNIT ONE UNIT TWO UNITS THREE UNITS


7 7+7 9+12 7+7+7 7+9+18 9+9+18 12+18+189 7+9 9+18 7+7+9 7+12+12 9+12+12 18+18+1812 7+12 12+12 7+7+12 7+12+18 9+12+1818 7+18 12+18 7+7+18 7+18+18 9+18+18

9+9 18+18 7+9+9 9+9+9 12+12+127+9+12 9+9+12 12+12+18

OUTDOOR UNIT FOUR UNITS


7+7+7+7 7+7+9+18 7+9+9+18 7+12+18+18 9+9+18+187+7+7+9 7+7+12+12 7+9+12+12 9+9+9+9 9+12+12+127+7+7+12 7+7+12+18 7+9+12+18 9+9+9+12 9+12+12+187+7+7+18 7+7+18+18 7+9+18+18 9+9+9+18 12+12+12+127+7+9+9 7+9+9+9 7+12+12+12 9+9+12+12 12+12+12+187+7+9+12 7+9+9+12 7+12+12+18 9+9+12+18

OUTDOOR UNIT FIVE UNITS


7+7+7+7+7 7+7+7+9+18 7+7+9+12+18 7+9+9+12+18 9+9+9+12+127+7+7+7+9 7+7+7+12+18 7+7+12+12+18 7+9+12+12+12 9+9+9+12+187+7+7+7+12 7+7+7+18+18 7+9+9+9+9 7+9+12+12+18 9+9+12+12+127+7+7+7+18 7+7+9+9+9 7+9+9+9+12 9+9+9+9+9 9+12+12+12+127+7+7+9+9 7+7+9+9+12 7+9+9+9+18 9+9+9+9+12 12+12+12+12+127+7+7+9+12 7+7+9+9+18 7+9+9+12+12 9+9+9+9+18

Indoor unit

Console

DuctWall

Cassette

COMBINING MULTI SPLIT INVERTER 2x1, 3x1, 4x1, 5x1



nd


CL FLOOR-CEILING AIR CONDITIONER

MU S/T HF Series

• High efficiency• Low noise• Easily changeable air filter• Treatment against corrosion• Hidrophilic aluminum

BIG AIR FLOW DISTRIBUTION:

The air distribution is wide thanks to the air swing design.

LOW PROFILE: ONLY 198 MM

The indoor unit has been designed with a double drainagesystem which reduces the interior gap.

Right-Left

SwingPosition

Up-Down

TECHNICAL SPECIFICATIONS:Model MU S/T 18HF MU S/T 24HF MU S/T 30HF MU S/T 36HF MU S/T 48HF MU S/T 60HFCode CL 20 623 CL 20 624 CL 20 625 CL 20 626 CL 20 627 CL 20 628Gas R410A R410A R410A R410A R410A R410ACOOLING Capacity W 5,275 7,034 8,792 10,551 14,068 17,585

BTU/h 18,000 24,000 30,000 36,000 48,000 60,000Kcal/h 4,537 6,049 7,561 9,074 12,098 15,123

HEATING Capacity W 5,569 8,026 9,380 11,723 15,533 19,930BTU/h 19,000 27,300 32,000 38,000 52,000 68,000Kcal/h 4,789 6,902 8,067 10,082 13,358 17,140

Power consumption cooling W 1,900 2,510 3,270 3,750 4,700 6,000Power consumption heating W 1,900 2,500 3,232 3,720 4,900 6,000Drying capacity Lts/h 1.8 2.4 3 3.6 4.8 6Air flow m3/h 800 1,000 1,200 1,400 2,000 2,000Volt-Phases-Frecuency V-Hz-Ph 230-50-1 230-50-1 230-50-1 230-50-1 400-50-3 400-50-3Noise level Indoor unit dB(A) 38 40 41 41 42 42Noise level Outdoor unit dB(A) 48 52 55 55 57 57Dimensions Indoor unit mm 995x660x198 1,285x660x198 1,670x680x240Dimensions Outdoor unit mm 845x695x335 895x860x330 990x960x360 940x1245x340Weight Indoor unit Kg 29 29 35 35 50 50Weight Outdoor unit Kg 52 75 103 103 110 110

Gas pipe diameter inch 1/2 5/8 3/4 3/4 3/4 3/4

Liquid pipe diameter inch 1/4 3/8 1/2 1/2 1/2 1/2

Pipe length max. m 25 30 30 30 50 50

Uneveness max. m 15 15 20 20 30 30

GASR410A



nd


CL SPLIT TYPE CASSETTE

MUCS HF Series

• Air rental inlet• Water elevator included• Pressure control system• Included low temperature kit• Particularly quiet• Programmable Operation• Infrared Remote Control• Easy cleaning filter• Exterior antifrost control• Air Flow direction• Super compact desing:

– Models 24 230 mm– Models 30 to 60 300 mm

• LED display for easytrouble shooting

TECHNICAL SPECIFICATIONS:Model MUCS 18HF MUCS 24HF MUCS 30HF MUCS 36HF MUCS 48HFCode CL 20 632 CL 20 634 CL 20 635 CL 20 636 CL 20 637Gas R410A R410A R410A R410A R410A

COOLING capacityW 5,275 7,034 8,792 10,551 14,068BTU/h 18.000 24.000 30.000 36.000 48.000Kcal/h 4,536 6,049 7,561 9,074 12,098

HEATING capacityW 6.008 8,026 9,380 11,723 15,533BTU/h 20,500 27,300 32.000 38.000 52.000Kcal/h 5,166 6,902 8,067 10,082 13,358

Power req. during cooling W 1,900 2,510 3,270 3,750 4,700Power req. during heating W 1,900 2,500 3,232 3,720 4,900Dehumidifying capacity Lts/h 119 2.4 3 3.6 4.8Air Flow m3/h 860 1050 1,600 1,600 1,750Volt-Phases-Frequency V-Hz-Ph 230-50-1 230-50-1 230-50-1 230-50-1 400-50-3Noise Level indoor unit dB(A) 40 40 40 44 44Noise Level outdoor unit dB(A) 48 52 55 57 57Panel dimensions mm 650x650x30 950x950x40 950x950x40 950x950x40 950x950x40Indoor unit dimensions mm 580x580x254 840x840x230 840x840x300 840x840x300 840x840x300Outdoor unit dimensions mm 845x695x335 895x860x330 990x960x360 990x960x360 940x1245x340

Weight indoor/panel Kg 21/3 27/6 33/6 33/6 33/6

Weight outdoor unit Kg 52 75 103 103 110

Gas pipe diameter inch 1/2 5/8 3/4 3/4 3/4

Liquid pipe diameter inch 1/4 3/8 1/2 1/2 1/2

Maximum lenght m 25 30 30 30 50

Maximum distance m 15 15 20 20 30

GASR410A

tec

CL2

0633

-637

_MU

CS-

HF-

ing

Super compact design

High fan speed for higherthan 3 m

Water pump included mod. 18 up to500 mm, other models 750 mm

Outdoor air inlet



nd


CL SPLIT TYPE CASSETTE INVERTER

MUCSR HF Series

• Air rental inlet• Water elevator included• Pressure control system• Included low temperature kit• Particularly quiet• Programmable Operation• Infrared Remote Control• Easy cleaning filter• Exterior antifrost control• Air Flow direction• Super compact design:

– Models 24 230 mm– Models 30 to 60 300 mm

• LED display for easytrouble shooting

TECHNICAL SPECIFICATIONS:Model MUCSR 18HF MUCSR 24HF MUCSR 30HF MUCSR 36HF MUCSR 48HFCode CL 20 673 CL 20 674 CL 20 675 CL 20 676 CL 20 677Gas R410A R410A R410A R410A R410A

COOLINGCapacity kW 6.36-5.30-2.12 8.11-7.10-2.70 10.81-9-3.61 12.6-10.5-4.2 14.86-14-4.95Consumption kW 2.28-1.63-0.76 3.01-2.19-1 3.98-2.79-1.33 4.42-3.26-1.47 5.44-4.35-1.81EER 3.25 3.24 3.23 3.22 3.22

HEATINGCapacity kW 7.19-6-2.4 9.64-7.6-3.21 12.16-9.5-4.05 15.06-12-5.02 17.04-15-5.68Consumption kW 2.33-1.64-0.78 3.13-2.09-1.04 3.92-2.62-1.31 4.87-3.31-1.62 5.53-4.16-1.84COP 3.66 3.64 3.63 3.63 3.61

Dehumidifying capacity Lts/h 119 2.4 3 3.6 4.8Air Flow m3/h 860 1050 1.600 1.600 1.750Volt-Fases-Frequency V-Hz-Ph 230-50-1 230-50-1 230-50-1 230-50-1 230-50-1Noise level indoor unit dB(A) 42/41/38 42/40/39 44/42.5/41 44/42.5/41 44/42.5/41Noise level outdoor unit dB(A) 51/46 53/48 55/50 57/52 59/54Panel dimensions mm 650x650x30 950x950x40 950x950x40 950x950x40 950x950x40Indoor unit dimensions mm 580x580x254 840x840x230 840x840x300 840x840x300 840x840x300Outdoor unit dimensions mm 842x695x324 895x862x313 990x966x354 940x1245x360 940x1245x360Gas pipe diameter inch 1/2 5/8 5/8 5/8 5/8Liquid pipe diameter inch 1/4 3/8 3/8 3/8 3/8Maximum lenght m 25 25 25 30 50Maximum diff btw units m 12 12 15 20 25Gas charge 1,600 2,300 3,350 4,100 4,450

Wiring connectionPower supply UE 3x2.5 3x2.5 3x2.5 3x2.5 3x2.5Power supply UI 3x1.0 3x1.0 3x1.0 3x1.0 3x1.0Interconnection 3x0.5 3x0.5 3x0.5 3x0.5 3x0.5

Drainage (indoor) mm Ø25 Ø25 Ø25 Ø25 Ø25Ambient temp. (outdoor) °C -15~43 -15~43 -15~43 -15~43 -15~43

* Please check up for smaller sizes

GASR410A

Super compact design

High fan speed for higherthan 3 m

Water pump included mod. 18 up to500 mm, other models 750 mm

Outdoor air inletINVERTERGREAT ENERGETIC SAVING!

tec

CL2

0673

-677

_MU

CSR

-HF-

ing



nd


CL FREE STANDING SPLITAIR-CONDITIONERMUCO R410A Series

• Extremely quiet operation• Powerful air flow• Infrared remote control• Programmable operation• Multicolor display• Directable air flow


Model MUCO-36-HG MUCO-48-HG MUCO-70-HG

Part Nr CL 20 756 CL 20 757 CL 20 758

Cooling capacitykW 10.56 14 20.5

BTU 36.000 48.000 70.000

Heating capacitykW 10.77 14.36 20.92

BTU 36,720 48,960 71,400

Power supply V-Ph-Hz 220/240-1-50 380/420-3-50 380/420-3-50

Air flow m3/h 935 1,700 2,040

Indoor Unit Power consumption kW 0.18 0.42 0.5

Outdoor Unit Power consumption kW 3.40 4.1 5.40

Indoor Unit Noise level (3 meters) dB(A) 42 53 54

Indoor Unit Dimensions mm 480x265x1680 600x335x1900 600x335x1900

Outdoor Unit Dimensions mm 925x395x700 925x395x1150 925x395x1150

Net weight indoor / outdoor Kg 48/81 58/106 62/108

Gas R410A R410A R410A

Gas pipe mm (inch) 5/8" 3/4" 3/4"

Liquid pipe mm (inch) 1/4" 1/2" 1/2"

GASR410A



nd


CL SPLIT TYPE DUCT

SUPER SLIM SeriesSLIM LINE

• Super compact design• 5 Ventilation Speed modes• Low static pressure• Filters included


Model MUC 18 HG MUC 24 HG MUC 36 HG

Code CL 20 763 CL 20 764 CL 20 765

Gas R410A R410A R410A

COOLING capacity kW 5,27 7 10.56

HEATING capacity kW 5,38 7.2 10.77

Air flow (LOW/MED/HIGH) m3/h 680/750/820 680/750/820 1500/1650/1800

Static pressure Pa 25

Power V-Hz-Ph 220-240V/1PH/50HZ 220-240V/1PH/50HZ

Power consumption W 1800 2100 3400

Noise Level Indoor unit (L/M/H) dB(A) 40/41/42 41/43/45 42/44/46

Indoor unit dimensions mm 800x450x220 800x450x220 1025x469x245

Indoor unit weight Kg 23 23 26

Outdoor unit dimensions mm 730x270x490 870x320x650 925x345x700

Outdoor unit weight kg 39 63 74

Filter Synthetic washable

Liquid pipe diameter inch 1/4" 3/8" 1/4"

Gas pipe diameter inch 1/2" 3/4" 3/4"

Drainpipe diameter mm 20 20 20

Model 24

Series Part Nr W H D m3 %Reduction

MUC-24 HG CL 20 764 800 220 450 0,08 0%

MUC-24 HF CL 20 614 1000 298 800 0,24 67%

MUC-24 HF2 CL 20 644 920 270 570 0,14 44%

Model 36

Series Part Nr W H D m3 %Reduction

MUC-36 HG CL 20 765 1025 245 469 0,12 0%

MUC-36 HF CL 20 616 1350 298 800 0,32 63%

MUC-36 HF2 CL 20 645 1140 270 710 0,22 46%

COMPARISON DUCT SIZE

* modelo MUC24HG

800*

(antes 1000)

220*(antes 298)

NEWSUPERCOMPACT

DESIGN

GASR410A



nd


CL CONDUCT TYPE SPLIT

GRAN CAUDAL SERIESSLIM LINE

• Super compact design• 5 Ventilation speed modes• High static pressure• Filters included

TECHNICAL SPECIFICATIONS:Model MUC 30 HG2 MUC 36 HG2

Code CL 20 775 CL 20 776

Gas R410A R410A

COOLING Capacity kW 8,80 10,56

HEATING Capacity kW 8,97 10,77

Air flow (LOW/MED/HIGH) m3/h 1224/1320/1411 1496/1649/1802

Static pressure Pa 50

Power V-Hz-Ph 220-240V/1PH/50HZ

Power consumption W 2900 3230

Noise level indoor unit (L/M/H) dB(A) 41/43/45 42/44/46

Indoor unit dimensions mm 1025x535x285 1025x535x285

Indoor unit weight Kg 38 38

Outdoor unit dimensions mm 870x320x650 925x345x700

Outdoor unit weight kg 63 74

Filter Synthetic washable filter

Liquid pipe diameter inch 1/4" 1/4"

Gas pipe diameter inch 5/8" 5/8"

Drainpipe diameter mm 20 20

GASR410A

1. Control cable2. Receiver IR3. ON/OFF button4. Mode button5. Sleep button6. Swing button (optional)

7. Programmer8. Temperature setting9. Temperature setting10. Fan speed11. Selection / error display

1. Signal transmission2. ON/OFF function3. Mode selection4. Fan speed5. Programmer6. Sleep button7. Temperature setting



nd


GASR410A

CL SPLIT TYPE DUCT

MUC HF2 SeriesSLIM LINE

• Fresh outdoor air intake• Filters included• Bottom and rear air intake• Condensate pump included• Special port for filling water and test the pump• Removable electric box• 4 speed fan motor• Wired control included• Optional remote control• LED display for easy trouble shooting• Alarm signal• ON/OFF switch connection

DIMENSIONS HF and HF2

TECHNICAL SPECIFICATIONSModel MUC 18HF2 MUC 24HF2 MUC 30HF2 MUC 36HF2 MUC 48HF2 MUC 60HF2Code CL 20 643 CL 20 644 CL 20 645 CL 20 646 CL 20 647 CL 20 648Gas R410A R410A R410A R410A R410A R410A

COOLINGW 5.275 7.034 8.792 10.551 14.068 17.585BTU/h 18.000 24.000 30.000 36.000 48.000 60.000Kcal/h 4.537 6.049 7.561 9.074 12.098 15.123

HEATINGW 6.155 8.009 9.380 11.723 15.533 19.930BTU/h 19.000 27.300 32.000 38.000 52.000 68.000Kcal/h 5.293 6.888 8.067 10.082 13.358 17.140

Power consumption Cooling W 1.900 2.560 3.250 3.750 4.700 6.000Power consumption Heating W 1.900 2.500 3.250 3.720 4.900 6.000Dehumidification lts/h 1,9 2,4 3 3,6 4,6 6Air flow m3/h 1.160 1.460 2.070 2.070 2.400 2.800Static pressure Pa 40 40 70 70 70 100Volt-Phases-Frecuency V-Hz-Ph 230-50-1 230-50-1 230-50-1 230-50-1 400-50-3 400-50-3Indoor unit noise level dB(A) 38 42 44 44 44 46Outdoor unit noise level dB(A) 48 52 55 57 57 57Indoor unit dimensions mm 920x210x635 920x270x635 1140x270x775 1140x270x775 1200x300x865 1200x300x865Outdoor unit dimensions mm 845x695x335 895x860x330 990x960x360 990x960x360 940x1245x340 900x1167x340Indoor unit weight Kg 29 29 35 35 50 50Outdoor unit weight Kg 52 75 103 103 110 110Gas pipe Ø inch 1/2 5/8 3/4 3/4 3/4 3/4Liquid pipe Ø inch 1/4 3/8 1/2 1/2 1/2 1/2Max Lenght m 25 30 30 30 50 50Max different level btw units m 15 15 20 20 30 30

Two air intake options: bottom or rear

LED display fortrouble shooting

Wired control includedOptional remote control

ModelDimensions mm (LxHxD) % Reduction

HF2 HF HF2/HF

MUC-18 920x210x635 1000x298x800 59%

MUC-24 920x270x635 1000x298x800 43%

MUC-30 1140x270x775 1350x298x800 32%

MUC-36 1140x270x775 1350x298x800 32%

MUC-48 1200x300x865 1350x298x800 11%

MUC-60 1200x300x865 1350x320x800 17%



nd


CL SPLIT TYPE DUCT

MUCR HF2 SeriesInverter DC

• Fresh outdoor air intake• Filters included• Condensate pump included• Special port for filling water and test the pump• Removable electric box• 4 speed fan motor• Alarm signal• ON/OFF switch connection

DIMENSIONS HF and HF2

TECHNICAL SPECIFICATIONS:Model MUCR 18HF2 MUCR 24HF2 MUCR 30HF2 MUCR 36HF2 MUCR 48HF2 MUCR 60HF2Part Nr CL 20 653 CL 20 654 CL 20 655 CL 20 656 CL 20 657 CL 20 658

COOLINGCapacity kW 6.36-5.30-2.12 8.11-7.10-2.70 10.81-9.00-3.61 12.60-10.50-4.20 14.86-14.00-4.95 16.92-16.00-5.64Consumption kW 2.28-1.63-0.76 3.01-2.19-1.00 3.98-2.79-1.33 4.42-3.26-1.47 5.44-4.35-1.81 6.22-4.99-2.07EER 3,25 3,24 3,23 3,22 3,22 3,21

HEATINGCapacity kW 7.19-6.00-2.40 9.64-7.60-3.21 12.16-9.50-4.05 15.06-12.00-5.02 17.04-15.00-5.68 20.16-17.50-6.72Consumption kW 2.33-1.64-0.78 3.13-2.09-1.04 3.92-2.62-1.31 4.87-3.31-1.62 5.53-4.16-1.84 6.59-4.85-2.20COP 3,66 3,64 3,63 3,63 3,61 3,61

Humidification Lts/h 1,9 2,4 3 3,6 4,6 6Air flow m3/h 1205/1000/945 1803/1501/1210 2200/1918/1800 2200/1918/800 2812/2458/2090 2890/2465/2138Outdoor unit Flow m3/h 2570/2300 3200/2850 5000/4800 6000/5800 6000/5800 6000/5800Static pressure Pa 55 65 75 110 130 140Volt-Phases-Frequency V/Hz/Ph 220-240/50/1 220-240/50/1 220-240/50/1 220-240/50/1 220-240/50/1 380V-3 Ph-50HzNoise pressure indoor dB(A) 43/38/36/31 45/42/39/36 46/44/41/38 47/45/44/40 47/46/43/40 47/46/45/42Noise pressure outdoor dB(A) 51/46 53/48 55/50 57/52 59/54 59/54Indoor unit dimensions mm 920x210x635 920x270x635 1140x270x775 1140x270x775 1200x300x865 1200x300x865Outdoor unit dimensions m 842x698x324 895x862x313 990x966x354 940x1245x360 940x1245x360 940x1245x360Gas pipe diameter ing 1/2 5/8 5/8 5/8 5/8 5/8Liquid pipe diameter ing 1/4 3/8 3/8 3/8 3/8 3/8Maximum length m 25 25 25 30 50 50Maximum diff btw units m 12 12 15 20 25 30Gas charge 1.600 2.300 3.350 4.100 4.450 3.850

Wiring connectionPower supply UE 3x2.5 3x2.5 3x2.5 3x2.5 3x2.5 5x2.5Power supply UI 3x1.0 3x1.0 3x1.0 3x1.0 3x1.0 3x1.0Interconnection 3x0.5 3x0.5 3x0.5 3x0.5 3x0.5 3x0.5

Drainage (indoor) mm Ø25 Ø25 Ø25 Ø25 Ø25 Ø25Ambient temp. (outdoor) °C -15~43 -15~43 -15~43 -15~43 -15~43 -15~43

* Please check up for smaller sizes

Two air intake options: bottom or rear

Wired control includedOptional remote control

LED display fortrouble shooting

GASR410A

ModelDimensions mm (LxHxD) % Reduction

HF2 HF HF2/HFMUCR-18 920x210x635 1000x298x800 59%MUCR-24 920x270x635 1000x298x800 43%MUCR-30 1140x270x775 1350x298x800 32%MUCR-36 1140x270x775 1350x298x800 32%MUCR-48 1200x300x865 1350x298x800 11%MUCR-60 1200x300x865 1350x320x800 17% INVERTER

GREAT ENERGETIC SAVING!



nd


CL SPLIT TYPE DUCT

MUC HF2 and MUCR HF2 Series

Condensate removal pump Water inlet for testing the pump ON/OFF switch

Ext

erna

lsta

ticpr

essu

re(P

a)

Air volume (m /h)3

Air volume (m /h)3

Air volume (m /h)3

Air volume (m /h)3

Air volume (m /h)3

Air volume (m /h)3

Ext

erna

lsta

ticpr

essu

re(P

a)

Ext

erna

l sta

ticpr

essu

re(P

a)

Ext

erna

l sta

ticpr

essu

re(P

a)

Ext

erna

l sta

ticpr

essu

re(P

a)

Ext

erna

l sta

ticpr

essu

re(P

a)

18 HF2 model

36 HF2 model

24 HF2 model

48 HF2 model

30 HF2 model

60 HF2 model



nd


CL CENTRIFUGALOUTDOOR UNITMUEC-HF series

• Flexible structure for air inletand outlet

• Non-visible installation• Centrifugal fan• Compatible with:

– Cassette HF– Duct HF– Floor-Ceiling HF/HF2

• Low noise level

Compatible with:

Floor-Ceiling HF

Duct HF/HF2

Cassette HF

Rear view

GASR410A

Dimensions mods. 18 / 24 Dimensions mods. 30 / 36

Model MUEC18HF MUEC24HF MUEC30HF MUEC36HFCode UE 20 603 UE 20 604 UE 20 605 UE 20 606

CapacityCooling kW 5,2 7 8,7 10,5Heating kW 6 8 9,2 11,7

Power supply V-Hz-ph 220-240/50/1 220-240/50/1 220-240/50/1 220-240/50/1

Power consumptionCooling kW 1,9 2,5 3,2 3.9Heating kW 1,9 2,35 3 3.7

Air flow m3/h 1650 2100 2200 2300Noise level dB(A) 60 64 65 67

GasType R410A R410A R410A R410ALoad gr 1800 2300 3450 3450(3100)

Dimensions WxHxD mm 1070x432x580 1220x443x668 1300x484x749 1300x484x749Net weight Kg 90 115 129 129

Pipe size

Liquid mm Ø6,35 (1/4") Ø9,53 (3/8") Ø12,7 (1/2") Ø12,7 (1/2")Gas mm Ø12,7 (1/2") Ø15,9 (5/8") Ø19(3/4") Ø19(3/4")Max length m 25 30 30 30Max height m 15 15 15 15

CL PORTABLE AIR CONDITIONERCode Model Cooling

Frig/h €

PORTABLE AIR COOLER (*)

CL 21 001CL 21 002CL 21 005CL 21 006

10 SFE model15 SFE-1 model30 HE model50 HE model

1.8003.8008.17013.800

2,459.643,318.667,796.07

11,486.56

(*) RAE marked product (4.5€)

• Accessories

Code Model Nº €

10 SFE

CL 21 011CL 21 024CL 21 025CL 21 027

Cold air oulet duct Ø125 mm, long. 650 mmCold air oulet extension duct Ø125 mm x 3 mTerminal for duct Ø125 mmHot air oulet duct Ø250 mm x 3 m

1234

74.7097.466.96

174.03

15 SFE-1

CL 21 012

CL 21 021CL 21 022CL 21 023CL 21 024CL 21 025CL 21 026

Cold air oulet duct Ø125 mm, long. 550 mm(2 required)Flange assy Ø135 mm for cold airFlange assy Ø300 mm for hot airHot air oulet duct Ø300 mm x 3 mCold air oulet extension duct Ø125 mm x 3 mTerminal for duct Ø125 mm2 ways diversion

1234567

60.3344.0862.64

211.1597.466.96

129.93

30 HE


Cold air duct Ø150 mm x 3 mFlange assy hot air Ø550 mmChamber kit with 2 ports for cold airChamber kit with 3 ports for cold airFlange assy cold air Ø300 mmWagon kitStand kit (without wheels)Wheels kit

12334556

104.41366.61192.59248.2762.64

626.49436.23178.66

50 HE


Cold air duct Ø150 mm x 3 mHot air tube Ø300 mm x 3 mChamber kit with 2 ports for cold airChamber kit with 3 ports for cold airFlange assy cold air Ø300 mmFlange assy Ø300-281 mm moveableWheels kitTerminal for duct Ø 150

12334467

104.41211.15192.59248.2762.6481.22

178.669.28

It does not generate electromagnetic alterations



nd




nd


MVDMVDMVDMVDCL VARIABLE DIGITAL SCROLL

MVD (up to 180kW)

System characteristics R410AEcological refrigerant, high energy saving andenvironmmentally friendly.

Great heating and cooling capacity.R410A is almost azeotropic which means that has littlevariations in its components structure, and its capacitydoes not go down during the charging process.It does not contain chlorine, which protects the ozonelayer.

Wide range of multiple combinations5 basic modules which can be combined following thecustomer whises.Increment of 2HP of the capacity range satisfies thecustomer needs with high accuracy.Maximum capacity 64HP

DEVELOPMENT OF THE DIGITAL SCROLLSYSTEMFrom its creation in 2002 and its launch in 2003 theMVD-D has become a leader product thanks to thesimplification of the A/C systems, its energy saving and thestable operation.

The system includes a DIGITAL SCROLL compressorwhich is adjusted and controlled through a pulse widemoduler (PWM). It includes the most advancedtechnology in the industry.

DIGITAL SCROLL compressor characteristicsWide range of energetic adjustment, from 10% to 100%Constant energy adjustmentLong life: The solenoid PWM valve can be used 40 billontimes which is the equivalent of 30 years.High efficency and refrigrant stability due to the axe sealingtechnology.

DIGITAL SCROLL compressor working principleThe DIGITAL SCROLL compressor works with and withoutload. When the external solenoide valve receives a signalof 220V, elevates 1m the superior spiral. The superior spiralmovement creates a room between both spiralseliminating the compression between them. It makes thecompressor unable of compressing the refrigerant. Theload capacity is 100% with charge and 0% without charge.

The compressor capacity is the average time between theperiods with and without charge. In a cycle of 20 seconds,if the spirals are joined for 10 seconds and separated for 10seconds, the average capacity is 50% .

The PWM valve is specially designed as a solenoid valve tomodulate the pressure power in the fix spiral and to controlthe state of load. The PWM gets the on/off signal andcontrols the load state. When the valve is connected, the fixspiral separates from the orbitant spiral. This process isrepeated to get the exterior unit control automaticdepending on the working interior units numbers and itsthermal demands.

4 way cassette (compact)

Floor

Hidden floor

Wall (compact)

High pressure duct

Low profile duct

1 way cassette

1 way cassette (compact)

4 way cassette

Wall

Floor/Ceiling

Duct



nd


It does not generate electromagnetic alterationsThe MVD system does not create electromagnetic alterationsbecause the compressor load and unload are mechanicalmovements. Those characteristics make the system properfor telecommunications companies and in all kinds ofaccuracy laboratories.

Accurate temperature controlCompared with the traditional centralized air conditioned theMVD can reach a 0.5 degrees accuracy

Longer pipes, wide height differenceThe DIGITAL SCROLL system is the only one whichdoesn't have separation equipment of gas/liquid and oil.In the load stage the refrigerant speed is enough toreturn the oil to the compressor. During the downloadphase, there is no refrigerant outlet so there is no oildischarge.

Advanced technologyThe DIGITAL SCROLL, compressor when is in a loadstage, the motor speed ensures that the refrigerant hasenough capacity to recover all the oil back to thecompressor. During the download phase ther is no oilmoving outside the compressor, because there is norefrigerant outlet. The refrigerant may also recover the oilback to the compressor.

Technical specifications

Model D140W D252W D280W D335W D400W D450W

Code CL 23 009 CL 23 010 CL 23 011 CL 23 012 CL 23 013 CL 23 014

COOLING capacity kW 14,0 25,2 28,0 33,5 40,0 45,0

HEATING capacity kW 16,0 27,0 31,5 35,0 43,0 47,0

Air flow m3/h 6.000 10.000 10.000 10.000 14.000 14.000

Sound level dB(A) 54 58 58 58 60 60

DimensionsNet mm 940x1245x340 980x1630x800 980x1630x800 980x1630x800 1380x1630x830 1380x1630x830

Packing mm 1058x1380x435 1040x1780x840 1040x1780x840 1040x1780x840 1440x1800x860 1440x1800x860

WeightNet Kg 112 245 245 245 396 396

Gross Kg 125 260 260 260 416 416

Pipes max. length mm 70 175 175 175 175 175

Max. height difference betweeninside and outside units

15 15 15 15 15 15

Max. height difference betweeninside units

20 50 50 50 50 50

Maximum number of inside units 1 x 8 1 x 13 1 x 16 1 x 16 1 x 16 1 x 20

Voltage 230V II Three phase 230/380V III

Inverter EMC Estándard Digital

5 th7 th

11 th13 th17 th19 th

EMW

0 1 2 3 4 5

30

25

20

15

10

51 2 3 4 (Temps)

(°C)

15m

70m

175m 150m:

50m:

15m:

Maximum tube distance between indoor and outdoor unit.

Maximum level difference between indoor and outdoor unit.

Maximum level difference between indoor units.

150m50m

15m



nd


Windows versionDesign system based on Windowsfriendly use.The main functions include: chargecalculation, interior units selection, tubecalculation, etc .

CAD versionTwo compatible versions with AutoCAD200 / 2002 and AutoCAD 2004 / 2005. Thisprofessional software is highlyrecommended to design projectsefficiently.

Independent calculation systemwith report generationIndependent calculation and reportgeneration to know the A/C charge

Simple and efficient groupadjustmentA group consists in an A/C line, withseveral central regulators, in a maximumof 1024 units. A system of 16 groups maybe mounted to control a great A/C system.The group adjustment can control eachunit online, join them to activate them orchange the parameters.

Calendar adjustment.No need to worry during the A/Coperation.With the adjustment system of thecalendar, the PC can easily adjust thedaily operation of the A/C and workautomatically.

CCM

CCM

Digital meterIntegrated control system

Supply Supply Supply

Supply

Converter

Max=64

Max=64

Max=64

Max=64

Anti-firealarm

Safety Electricsupply

- Lift- Pump- Light-...etc

Leon ® bus

Lonwork

Control systemintegrated

Tactile controller

Central controller Remote control

Max=16

BUILT IN INTELLIGENT CONTROL SYSTEMThe built in intelligent control system (BMS) uses a high speed independentmulti transmission method. It has a centralized control function to regulatethe A/C at high speed in the entire building

The MVD system has different control solutions:Individual control, group control, network control , etc.1 PC can control up to 16 central regulators1 central regulator can control up to 64 interior units.In total 1024 interior units can be controlled.

CL HORIZONTAL PACKAGEDAIR CONDITIONERmods. COMPACT / SPLIT



nd


CL AIR CONDITIONERWITHOUT OUTDOOR UNITMU-WZ Series

• Low noise level• High efficiency• Easy installation: only two holes Ø162 mm• Fresh air intake• Remote control and front display• EPDM rubber (patented) exterior grating• MOD BUS connection (ideal for hotels)• Super compact design• Support resistance for low temperatures

(only Mod. 32)

A = 230 mm (mod. 25)245 mm (mod. 32)

Two holes Ø162 mm

GASR410A

Fresh air intake

EPDM rubber (patented) exterior grating

Only Model 32:

Anti-odour andanti-bacterial filters

Safety box for remotecontrol

On boardcontrol panel

TECHNICAL SPECIFICATIONS:Model MU-WZ25 MU-WZ32Code CL 19 781 CL 19 782Cooling capacity W 2.460 3.250Heating capacity W 2.780 3.330 (3.830)Heating resistance W – 500Power consumption (cooling-heating) W 980 - 860 1.370 - 1.380 (+500 heat.resist.)EER (type) 2,53 (B) 2,43 (B)COP (type) 3,23 B 2,60 (C)Air flow m3/h 480 550Fan speeds 3 + AUTO 3 + AUTODehumidification capacity l/h 0,8 1,1Inside noise level dbA 37 - 40 - 46 37 - 44 - 48Outside noise level dbA 43 41 - 52MOD BUS connection Optional SIVoltage V/Hz 230 - 50 230 - 50Dimensions (Width x Height x Depth) mm 1.000 x 580 x 230 1.000 x 580 x 245Weight Kg 40 42Diameter of holes in the wall mm 162 162



nd


CL AIR CONDITIONERWITHOUT OUTDOOR UNITMU-UNIC

ELECTRONIC CONTROL:

Filter led: indicates when the filter needs cleaning.

Infrared remote control: a liquid crystal display shows operatingmode and settings. Main controls are shown on thedisplay, secondary controls under a sliding cover.

Automatic mode: enables pre-set comfort levelsto be achieved automatically.

Night mode: reduction in fan speed and increase innight time comfort.

Dehumidification: reduction in the humidity withoutaltering the temperature.

Time setting: automatic control of “ON” and “OFF”times.

Display of the working alarms: it executes the diagnosisand it signals the maintenance need.

AEASY AND FAST ASSEMBLY:

The only wall air conditionerwithout an outdoor unit!

• Powerful and versatile.

• Can be easily installed at high or lowlevel on an external wall.

• Allows an easy installation: two holesdrilled with a core bit are all that isrequired.

• It is supplied with all installationaccessories. Both external grills can befixed from inside room eliminatingpossible external access problems.

TECHNICAL DATA:Model MU-UNIC 8.5

Part No. CL 19 742Cooling capacity kW/Frig/h 2,10/1.806Heating capacity kW/Frig/h –Power requeriment cooling W 790Power requeriment heating W –E.E.R.* in cooling 2,66COP in heating –Room Air volume m3/h 350Outside air volume m3/h 480Dehumidification capacity l/h 1Fan speeds nº 3Noise level dbA (min-max) 36/45Refrigerant R410APower supply V/Hz 230/50Dimens. (widthxhighxdepth) mm 870x400x280Weight Kg 43Wall holes diameter mm 153

(*) Data obtained according pr EN 14511 standards



nd


CL PORTABLE MONOBLOCAIR CONDITIONERMU-PO “SuperEco II” Series

• Automatic removal of condensed water

• Remote control

• Electronic control

• Collecting tray included. Removal of condensed water by tube

• Adjustable air direction

• Light and easy to move around with rolling casters

• Rotatory compressor

• Hot air discharge tube included

Hot air dischargetube included

Compact designRemote control

GASR410A

Model MUPO-08-GC

Code CL 20 096

Refrigerant R410A

Cooling capacity

Capacity W 2.340

Consum. W 950

Current A 4,1

EER 2,47

Power supply Ph-V-Hz 220-240V / 50Hz

Power consumption W 1.100

Maximum current A 5,6

Starting current A 15

Noise level (Hi/Mi/Lo) dBA 55 / 53 / 51

Dimensions (W x H x D) mm 300 x 790 x 345

Net weight kg 21

Refrigerant load gr 390



nd


CL PORTABLE AIR-CONDITIONERMONOBLOCMU-PO “Eco” series

Model MU-PO 11RECode CL 20 095

Cooling capacityW 3,500

BTU/h 12,000Kcal/h 3,010

Heating capacityW 2,400

BTU/h 8,000Kcal/h 2,064

Cooling power consumption W 1,610Heating power consumption W 2,450Dehumidification capacity l/h 1.55Air volume (M/M/L) m3/h 570/510/430Voltage-frequency V-Hz 230-50Noise level dB(A) 59Unit Width mm 546Unit Height mm 840Unit Depth mm 405Unit weight Kg 47

REMOVAL OF CONDENSED WATERRemoves the condensed water assuring the best humi-dity level in the room. Possibility of removal of condendedwater through a water tank (with full tank alarm) or conti-nuous discharge tube.

HOT AIR DISCHARGE TUBEEasy and fast installation. Allows the use of the air condi-tioner immediately: pull down the back cover for cou-pling.

AIR FILTERRetains dust and air impurities.Easy to remove for cleaning and maintenance

VENTILATION FUNCTIONAllows working only in fan mode

THERMOSTATKeeps the selected temperature automatically

DEHUMIDIFYINGReduces humidity restoring temperature

ROTARY COMPRESSOROptimizes performance. Low consumption

GASR410A

CL HORIZONTAL PACKAGEDAIR CONDITIONERmods. COMPACT / SPLIT



nd


(1) Outside temperature: 35°C dry bulbRoom temperature: 27/19°C.

(2) Outside temperature: 7°C dry bulb / 6°C wet bulbRoom temperature: 20°C.

(3) With free discharge 10 m distance and 1 m. height in open air(4) Please read installation manual for dimensioning of electrical wiring (l.max.)

• Cool Only and Heat Pump (/R)• Scroll compressor• Digital programmable remote control• Thermostatic expansion valve• Double possibility in fans inlet and discharge• Full thermal-acoustic isolation in all panels• Compressor and fans on antivibrators• Easy access to all components• Exterior source connections• Easy to use as split type

COOLING ONLY UDS 07 09-2 09-3 11 14 18 20 24 27 35Cooling capacity (1) W 7550 9000 9000 11660 13590 17730 20200 24100 28100 35200Full absorbed power (1)(4) W 3020 3700 3700 5120 5630 7510 8890 10040 11910 14980Refrigerant R R410APower supply V/f/Hz 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50Cooling connections " 1/2-3/4 1/2-3/4 1/2-3/4 1/2-7/8 1/2-7/8 5/8-7/8 5/8-1 1/8 5/8-1 1/8 5/8-1 1/8 3/4-1 1/8O.U.-I.U. connection hose Ud. 3x1,5 3x1,5 3x1,5 3x1,5 3x1,5 4x1,5 4x1,5 4x1,5 4x1,5 4x1,5Remote control connection wire Ud. 2x1 2x1 2x1 2x1 2x1 2x1 2x1 2x1 2x1 2x1Outdoor fan nominal air flow m3/h 2340 2340 2340 3110 3290 4270 4270 6600 6600 8610Indoor fan nominal air flow m3/h 1560 1560 1560 2330 2650 3340 3510 5230 5230 6430Outdoor unit noise level (3) dB(A) 45 45 45 47,9 47 49 56 57 57 58Indoor unit noise level (3) dB(A) 43 43 43 44 45 50 50 52 52 54Indoor fan nominal staticpressure available mm.c.a. 7 7 7 8 7 8 7 8 8 8

Indoor fan maximum staticpressure available mm.c.a. 12 12 12 16 15 22 20 18 18 20

Outdoor fan nominal staticpressure available mm.c.a. 4 4 4 4 4 4 5 5 5 5

Outdoor unit weight Kg 112 117 117 160 166 222 259 322 339 389Indoor unit weight Kg 181 186 186 254 264 354 398 481 511 592

HEAT PUMP UDS 07/R 09-2/R 09-3/R 11/R 14/R 18/R 20/R 24/R 27/R 35/RCooling capacity (1) W 7500 8900 8900 11760 13760 17570 20200 24000 27850 35100Full absorbed power (1)(4) W 3000 3630 3630 5130 5620 7620 8700 10080 11850 14930Heating capacity (2) W 7650 9350 9350 12840 13490 19139 22100 25200 28830 36330Full absorbed power (2)(4) W 2860 3320 3320 4840 4730 7690 8030 8870 10440 13020Refrigerant R R410APower supply V/f/Hz 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50Cooling connections " 1/2-3/4 1/2-3/4 1/2-3/4 1/2-7/8 1/2-7/8 5/8-7/8 5/8-1 1/8 5/8-1 1/8 5/8-1 1/8 3/4-1 1/8O.U.-I.U. connection hose Ud. 3x1,5 3x1,5 3x1,5 3x1,5 3x1,5 4x1,5 4x1,5 4x1,5 4x1,5 4x1,5Remote control connection wire Ud. 2x1 2x1 2x1 2x1 2x1 2x1 2x1 2x1 2x1 2x1Outdoor fan nominal air flow m3/h 2340 2340 2340 3110 3290 4270 4270 6600 6600 8610Indoor fan nominal air flow m3/h 1560 1560 1560 2330 2560 3340 3510 5230 5230 6430Noise level outdoor unit. (3) dB(A) 45 45 45 47,9 47 48 56 57 57 58Noise level Indoor unit (3) dB(A) 43 43 43 44 45 50 50 52 52 54Indoor fan nominal staticpressure available mm.c.a. 7 7 7 8 7 8 7 8 8 8

Indoor fan maximum staticpressure available mm.c.a. 12 12 12 16 15 22 20 18 18 20

Outdoor fan nominal staticpressure available mm.c.a. 4 4 4 4 4 4 5 5 5 5

Outdoor unit weight Kg 116 121 121 166 173 232 269 334 350 400Indoor unit weight Kg 69 69 69 94 98 132 139 159 172 203

CL PACKAGED AIR CONDITIONER (R-410A)• COMPACT

Code ModelPower (W)

€Cool Heat

COOLING ONLY

CL 22 301CL 22 302CL 22 303CL 22 304CL 22 305CL 22 306CL 22 307CL 22 308CL 22 309CL 22 310

ARTIC 07ARTIC 09-2ARTIC 09-3ARTIC 11ARTIC 14ARTIC 18ARTIC 20ARTIC 24ARTIC 27ARTIC 35

7.5509.0009.000

11.66013.59017.73020.20024.10028.10035.200

––––––––––

4,323.214,594.754,594.754,990.635,375.796,336.917,027.437,848.428,147.439,171.60

HEAT PUMP


COM - H 07C/RCOM - H 09C-2/RCOM - H 09C-3/RCOM - H 11/RCOM - H 14/RCOM - H 18/RCOM - H 20/RCOM - H 24C/RCOM - H 27/RCOM - H 35/R

7.5008.9008.900

11.76013.76017.57020.20024.00027.85035.100

7.6509.3509.350

12.84013.49019.13922.10025.20028.83036.330

4,680.074,894.814,894.815,528.525,737.966,671.627,503.218,391.628,753.799,957.94

• SPLIT

Code ModelPower (W)

€Cool Heat

COOLING ONLY


PAR - H 07CPAR - H 09C-2PAR - H 09C-3PAR - H 11PAR - H 14PAR - H 18PAR - H 20PAR - H 24CPAR - H 27PAR - H 35

7.5509.0009.000

11.60013.59017.73020.20024.10028.10035.200

––––––––––

4,323.214,594.754,594.754,990.635,375.796,336.917,027.437,848.428,147.439,171.60

HEAT PUMP


PAR - H 07C/RPAR - H 09C-2/RPAR - H 09C-3/RPAR - H 11/RPAR - H 14/RPAR - H 18/RPAR - H 20/RPAR - H 24C/RPAR - H 27/RPAR - H 35/R

7.5008.9008.900

11.76013.76017.57020.20024.00027.85035.100

7.6509.3509.350

12.84013.49019.13922.10025.20028.83036.330

4,680.074,894.814,894.815,528.525,737.966,671.627,503.218,391.628,753.799,957.94



nd


DIMENSIONS COMPACT:

Mod. A B C uts.

07 1136 1115 500 mm09-2 1136 1115 500 mm09-3 1136 1115 500 mm11 1355 1375 513 mm14 1355 1375 513 mm18 1550 1550 570 mm20 1550 1550 570 mm24 1705 1777 693 mm27 1705 1777 693 mm35 1865 2100 860 mm

DIMENSIONS SPLIT TYPE:

Mod. 07 09-2 09-3 11 14 18 20 24 27 35A 1136 1136 1136 1355 1355 1550 1550 1705 1705 1865B 626 626 626 778 778 895 895 1050 1050 1200C 500 500 500 513 513 570 570 693 693 860D 494 494 494 598 598 655 655 725 725 805

Units mm mm mm mm mm mm mm mm mm mm



nd


CL WATER CHILLER

MUEN HG “Mini Chiller”HEAT PUMP

Mundoclima MiniChiller Se-ries is an air-cooled waterheat pump chiller, with built-inwater pump and expansiontank. Capacity range from5kW up to 16kW

10,5 and 14 kW

Expansion tank

Plate heat exchanger

Pressure difference switch

Water pump

Waterpressure

Controller: statusinspection anderror display

Emergencyswitch

�

1. Air cooled system with no coo-ling tower which saves energy,space and provides a quieteroperation.

2. Fancoils as indoor units usewater instead of refrigerant. Thiswater gets to the indoor unitsthrough an impulse pump.

3. Available units with DC InverterCompressor (30% energy sa-ving rate) or Digital Scroll (40%energy saving rate).

4. Plate heat exchanger.

5. Enviromentally friendly R410ARefrigerant.

6. Voltage protection, Current pro-tection, Anti-freezing protection,Water flow protection ensuressafe operation.

7. Rustproof system.

8. External coil protection grills.

9. Compact design: Built-in waterpump and expansion tank. Onlyneeds to be connected to thewater pipe.

10. Emergency stop button.

11. Built-in water pressure gauge.

12. Flexible control: built-in insidecontrol can be also remote con-trolled.

13. Built-in device for operation withlow temperatures under -10°C.

14. Main functions:

a. Operation mode.

b. Error and status display indi-cation.

c. Defrosting system.

d. Anti-freezing protection.

5,5 kW

GASR410A



nd


TECHNICAL SPECIFICATIONS:Model MUEN 05 HG MUEN 10 HG MUEN 15 HGCode CL 25 601 CL 25 602 CL 25 603Power supply V-Ph-Hz 220-240, 1, 50 220-240 , 1, 50 380-415 , 3, 50

CoolingCapacity kW 5 10.5 14Power consumption W 1938 3614 4859

HeatingCapacity kW 5.5 12 16.12Power consumption W 1987 4004 5218

Max. power consumption W 2350 5500 6550Max. current consumption A 11.7 25.7 10.5Starting current A 36.8 110 60

Compressor

Model PA225X2CS-4KU1 ZP50K3E-PFZ-522 C-SBN453H8DType Rotary Rotary SCROLLBrand Midea-Toshiba Copeland SANYOCapacity Btu/h 18493 42600 56000Consumption W 1855 4100 5750RLA A 8.7 19.5 9.77LRA A 36.8 123 67Thermal protection Inner Inner InnerCondenser μF 50μF/440V-450V 80μF –Refrigerant oil ml 750 1656 FV68S, 1600

External fan

Model YDK120-8U YDK100-6A(×2) YDK100-6A(×2)Type Motor AC Motor AC Motor ACBrand Welling Welling WellingPower (high/low) W 220 185/120 185/120Condenser μF 6μF/450V 5μF/450V 5μF/450VSpeed (High/Low) r/min 660 860/610 860/610

Condenser coil

Rows 1 3 3Tube diameter mm 22×19.05 25.4×22 25.4×22Fin spacing mm 1.6 1.5 1.5Fin type Hydrophilic Aluminium Hydrophilic Aluminium Hydrophilic AluminiumExternal tube diameter mm Ø7.94 Ø9.53 Ø9.53Dimensions mm 893×880 635×1220×66 718×1220×66Circuit nr. 4 6 12

Water pumpType RS15/6-3-WILO RL25/8.5 RL25/8.5Power (H/M/L) W 93/67/46 210/175/120 210/175/120Column m 5.5 8.5 8.5

Air flow m3/h 5563 6500/4300 6500/4300Expansion system Capillary tube Capillary tube Capillary tubeNoise level pressure dB(A) 55 58 60/50Water flow m3/h 0.86 1.74 2.4Heat exchanger pressure drop kpa 21 44 34Max/min water pressure kpa 500/150 500/150 500/150

Outdoor unitDimensions (WxHxD) mm 990×966×354 940×1245×360 1070×1249×420Packing (WxHxD) mm 1120×1100×435 1058×1380×438 1188×1385×498Net/gross weight kg 83/89 138/145 145/160

RefrigerantType R410A R410A R410ACharge g 1600 3000 4200

WiringPower supply mm2 3×2.5 3×4.0 5×2.5Remote control mm2 3×1.0 3 ×1.0 3×1.0

Tubes Size mm DN25 DN32 DN32Min. water content l 21 43 60Room temperature °C Cooling: 10~43°C; Heating: -15/-24°CWater temperature °C Cooling: 4~20°C; Heating: 30~55°C

Price € 2,520.00 4,250.00 4,950.00



nd


CL WATER CHILLER

MUEN HG Digital ScrollHEAT PUMP

• Copeland Digital ScrollCompressor

• Saves more energythan the Invertersystem

• Silent operation• Hydronic kit not

included• Modular design

TECHNICAL SPECIFICATIONSModel MUEN 30 HG MUEN 65 HGCode CL 25 604 CL 25 605

COOLING capacitykW 30 65USRT 8.5 18.5

HEATING capacitykW 32 69USRT 9.1 19.6

Power supply V-ph-Hz 380-3-50 380-3-50

CoolingPower consumption kW 10 21.5Current consumption A 17.3 18.7 x 2

Heating4Power consumption kW 9.8 24Current consumption A 17 18.4 x 2

CompressorType Digital Scroll Digital ScrollQuantity nr. 1 digital + 1 standard 1 digital + 3 standard

RefrigerantType R410A R410ACharge Kg 7 14

Waterexchanger

Type Plate Plate

Water flowm3/h 5.2 11.2Gph 22.9 49.3

Pressure drop kPa 29.4 29.4Max working pressure MPa 1 1Ø Pipes mm DN100 DN100

Condensation typeexchanger

Type Aluminium fin Aluminium finAir flow m3/h 11.000 22.000Fan consumption kW 0.67 0.67 x 2

Dimensions L x W x H mm 1,514 x 850 x 1820 2,492 x 850 x 1820Packing dimensions L x W x H mm 1,620 x 1,034 x 2,041 2,612 x 1,034 x 2,041Net weight Kg 440 700Noise level dB(A) 58 60

Price € 8,300.00 13,975.00

* The nominal capacities are based on the following conditions:Cooling: Water temperature 12°C/7°C. Outside temperature: DB/WB 35°C/24°CHeating: Water temperature 40°C/45°C. Outside temperature: DB/WB 7°C/6°C

65 kW30 kW

�

CL WATER CHILLERSerie «MINI CHILLER»

• Air condensation R-410A RefrigerantHEAT PUMP

Code ModelPower (kW) Circuits €Refrig. Heat.

CL 25 601CL 25 602CL 25 603

MUEN 05 HGMUEN 10 HGMUEN 15 HG

510,514

5,512

16,12

4612

2,520.004,250.004,950.00

AIR COOLED WATER CHILLER «KRYSTAL» Series• Air condensation R-410A Refrigerant

HEAT PUMP


CL 25 501CL 25 502CL 25 503

KRY021 230VKRY031 230VKRY041 230V

5,27,510

5,5811

111

4,326.005,459.006,077.00

CL 25 504CL 25 505

KRY051 380V IIIKRY061 380V III

1215

13,517,5

11

7,725.008,240.00

WATER CHILLER Serie «HOTTY»• HEAT PUMP reversible air/water

R-407C High temperature

Code ModelPower (kW)

€Refrig. Heat.CL 25 541CL 25 542CL 25 543CL 25 544CL 25 545

Heat pump HOTTY 031 MOCHeat pump HOTTY 041 MOCHeat pump HOTTY 041 TOCHeat pump HOTTY 061 TOCHeat pump HOTTY 081 TOC

7,611,511,616,321,7

9,113,313,318,724,8

8,446.008,858.009,270.00

10,712.0013,287.00

CL 25 550CL 25 551CL 25 552CL 25 553CL 25 554

Three-way valve for HOTTY 137K3V000 systemTank with inner coil 200L 137ACV200Tank with inner coil 300L 137ACV300Tank with inner coil 500L 137ACV500Remote control 137KRC050

418.001,885.002,009.002,534.00

249.00

AIR COOLED WATER CHILLER «ADAPTATIVE» Series• Air condensation R-407C Refrigerant

Only COOLING


CL 25 510CL 25 511CL 25 512CL 25 513CL 25 514CL 25 515CL 25 516

HYDRA 051 380V IIIHYDRA 061 380V IIIHYDRA 081 380V IIIHYDRA 091 380V IIIHYDRA 101 380V IIIHYDRA 121 380V IIIHYDRA 151 380V III

12,915,718,121,826,731,236,6

-------

1111111

6,180.006,592.008,755.009,270.009,888.00

10,815.0014,729.00

• Air condensation R-407C RefrigerantHEAT PUMP


CL 25 520CL 25 521CL 25 522CL 25 523CL 25 524CL 25 525CL 25 526

HYDRA 051 380V IIIHYDRA 061 380V IIIHYDRA 081 380V IIIHYDRA 091 380V IIIHYDRA 101 380V IIIHYDRA 121 380V IIIHYDRA 151 380V III

12,915,718,121,826,731,236,6

14,917,519,824,229,935,139,7

1111111

7,107.007,725.00

10,094.0010,815.0011,330.0012,566.0016,995.00



nd


NO DEPOSITNEEDED

PUMP &EXPANSION

TANK

with

HIGHTEMPERATURE

65

HYDRAULICSET

FULL

WITH PUMPAND

EXPANSION TANK

CL AIR COOLED WATER CHILLER



nd


GALAXYPf Kw 39,5 ÷ 173,5

ZENITPt Kw 47,8 ÷ 194,3

Model 82 102 122 152 123

Cooling capacity (A35W7) kW 39,5 49,7 58,4 75,9 84,5

Dimensions S S S M M

€ 12,700.00 13,660.00 14,330.00 18,980.00 20.280.00

ACCESSORIES

cod. 1370P1000 1370P1000 1370P1000 1370P1010 1370P1010

€ 1,640.00 1,640.00 1,640.00 1,890.00 1,890.00

cod. 1370P2000 1370P2000 1370P2000 1370P2010 1370P2010

€ 2,650.00 2,650.00 2,650.00 3,130.00 3,120.00

cod. 137AP1S00 137AP1S00 137AP1S00 137AP1S10 137AP1S10

€ 2,540.00 2,540.00 2,540.00 2,940.00 2,940.00


€ 3,640.00 3,640.00 3,640.00 4,180.00 4,180.00

cod. 137AP1P00 137AP1P00 137AP1P00 137AP1P10 137AP1P10

€ 2,700.00 2,700.00 2,700.00 3,100.00 3,100.00


€ 3,760.00 3,760.00 3,760.00 4,330.00 4,330.00

cod. 137HRP000 137HRP000 137HRP000 137HRP010 137HRP010

€ 820.00 820.00 820.00 1.010.00 1.010.00

cod. 137HRT350 137HRT350 137HRT360 137HRT370 137HRT370

€ 2,050.00 2,050.00 2,120.00 2,840.00 2,840.00

cod. 137MHL020 137MHL020 137MHL020 137MHL020 137MHL020

€ 190.00 190.00 190.00 190.00 190.00

cod. 137BCA000 137BCA010 137BCA010 137BCA020 137BCA020

€ 300.00 380.00 380.00 470.00 470.00

cod. 137VTE000 137VTE010 137VTE020 137VTE020 137VTE020

€ 420.00 480.00 380.00 380.00 380.00

cod. 137RPL000 137RPL000 137RPL000 137RPL010 137RPL010

€ 240.00 240.00 240.00 460.00 460.00

cod. 137KRC030 137KRC030 137KRC030 137KRC030 137KRC030

€ 125,00 125,00 125,00 125,00 125,00

cod. 137SSC110 137SSC120 137SSC120 137SSC130 137SSC140

€ 1,630.00 2,080.00 2,080.00 2,730.00 3,100.00

cod. 137RAE000 137RAE000 137RAE000 137RAE030 137RAE030

€ 240.00 240.00 240.00 490.00 490.00

cod. 137RCA130 137RCA130 137RCA130 137RCA130 137RCA140

€ 180.00 180.00 180.00 180.00 260.00

GALAXY ONLY COOLING

Hydronic kit 2 pumps + tank SERIE

Hydronic kit 1 pump + tank PARALELO

Unit base

PRICE in €

Hydronic 2 pumps + tank PARALELO

Hydronic kit 1 pump

Hydronic 2 pump

Heat recovery (partial)l

Heat recovery (total)

Refrigerant gauges kit

Hydronic kit 1 pump + tank SERIE

Treated aluminium battery

Electronic thermostatic valve

Protection net for the battery

Basic control kit

Compressors soft starter

Antifreeze resistence evaporator

Compressor resistence carter

133 153 134 154 126

93,3 112,6 129,4 151,8 173,5

M M M L L

21,220.00 24,820.00 28,550.00 30.750.00 36,400.00

1370P1010 1370P1020 1370P1020 1370P1030 1370P1030

1,890.00 2,090.00 2,090.00 2,110.00 2,110.00

1370P2010 1370P2020 1370P2020 1370P2030 1370P2030

3,120.00 3,400.00 3,400.00 3,420.00 3,420.00

137AP1S10 137AP1S20 137AP1S20 137AP1S30 137AP1S30

2,940.00 3,130.00 3,130.00 3,160.00 3,160.00


4,180.00 4,490.00 4,490.00 4,520.00 4,520.00

137AP1P10 137AP1P20 137AP1P20 137AP1P30 137AP1P30

3,100.00 3,300.00 3,300.00 3,330.00 3,330.00


4,330.00 4,640.00 4,640.00 4,670.00 4,670.00

137HRP010 137HRP020 137HRP020 137HRP030 137HRP030

1,010.00 1,700.00 1,700.00 2,120.00 2,120.00

137HRT380 137HRT380 137HRT390 137HRT400 137HRT410

3,130.00 3,130.00 4,500.00 4,680.00 5,000.00

137MHL020 137MHL020 137MHL0202 137MHL0202 137MHL0202

190.00 190.00 370.00 370.00 370.00

137BCA020 137BCA030 137BCA040 137BCA050 A37BCA060

470.00 660.00 820.00 820.00 860.00

137VTE020 137VTE020 137VTE030 137VTE030 137VTE030

380.00 380.00 630.00 630.00 630.00

137RPL010 137RPL010 137RPL010 137RPL020 137RPL020

460.00 460.00 460.00 550.00 550.00

137KRC030 137KRC030 137KRC030 137KRC030 137KRC030

125,00 125,00 125,00 125,00 125,00

137SSC140 137SSC150 137SSC160 137SSC160 137SSC170

3,100.00 4,080.00 5,400.00 5,400.00 6,200.00

137RAE030 137RAE030 137RAE030 137RAE030 137RAE030

490.00 490.00 490.00 490.00 490.00

137RCA140 137RCA140 137RCA150 137RCA150 137RCA160

260.00 260.00 350.00 350.00 520.00

CL 25 701 CL 25 702 CL 25 703 CL 25 704 CL 25 705 CL 25 706 CL 25 707 CL 25 708 CL 25 709 CL 25 710

AND HEATING PUMPSGalaxyZenit



nd


Model 082 102 122 152 123

Cooling power kW38,748,757,374,482,8(A35W7)

Heat power (A7/W35) 47,8 55,0 66,8 91,8 104,0

Dimensions S S S M M

Cod.

€ 15,000.00 16,100.00 17,000.00 22,700.00 24,200.00

ACCESSORIES

cod. 1370P1000 1370P1000 1370P1000 1370P1010 1370P1010

€ 1,640.00 1,640.00 1,640.00 1,890.00 1,890.00

cod. 1370P2000 1370P2000 1370P2000 1370P2010 1370P2010

€ 2,650.00 2,650.00 2,650.00 130.00 120.003, 3,


€ 2,540.00 2,540.00 2,540.00 2,940.00 2,940.00


€ 3,640.00 640.00 640.00 180.00 180.003, 3, 4, 4,


€ 2,700.00 2,700.00 2,700.00 100.00 100.003, 3,


€ 3,760.00 760.00 760.00 330.00 330.003, 3, 4, 4,

cod. 137HRP000 137HRP000 137HRP000 137HRP010 137HRP010

€ 820.00 820.00 820.00 1,010.00 1,010.00

cod. 137MHL020 137MHL020 137MHL020 137MHL020 137MHL020

€ 190.00 190.00 190.00 190.00 190.00

cod. 137SAB050 137SAB050 137SAB050 137SAB110 137SAB110

€ 375.00 375.00 375.00 545.00 545.00

cod. 137RPL000 137RPL000 137RPL000 137RPL010 137RPL010

€ 240.00 240.00 240.00 460.00 460.00


€ 125.00 125.00 125.00 125.00 125.00


€ 390.00 390.00 390.00 390.00 390.00

cod. 137PMC000 137PMC010 137PMC010 137PMC040 137PMC020

€ 250.00 310.00 310.00 310.00 450.00

cod. 137SSC110 137SSC120 137SSC120 137SSC130 137SSC140

€ 1,630.00 2,080.00 2,080.00 2,730.00 3,100.00


€ 430.00 430.00 430.00 530.00 530.00


€ 450.00 450.00 450.00 500.00 500.00

€

cod. 137DCC190 137DCC190 137DCC190 137DCC210 137DCC220

€ 970.00 970.00 970.00 1,130.00 1,170.00

cod. 137VQE000 137VQE000 137VQE000 137VQE000 137VQE000

€ 590.00 590.00 590.00 590.00 590.00

Cod.

Cod.

€ 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00

Dimensions M = medium L = bigS = small

Control fan device

Kit overheating /

Interface RS 485

Soft starters compressors

Antifreeze resistance

Antifreeze evaporator + tank

Carter resistance of the compressor

Protection net for the battery

Basic control kit

Control TOP kit

Antivibration support

Heat revovery (partial)

Kit of refrigerant gauge

Kit 1 bomba +hidrónico depósito SERIE

Hydronic tank PARALELO2 pumps +

Hydronic kit 2 pumps + tank SERIE

Hydronic kit tank PARALELO1 pump +

Base unit

Hydronic kit 1 pump

Hyndronic kit 2 pumps

ZENIT STANDARD

133 153 134 154 126

91,4 110,4 126,8 148,7 170,0

113,5 132,8 154,7 177,1 202,0

M M M L L

26,600.00 29,350.00 33,980.00 36,620.00 43,600.00

1370P1010 1370P1010 1370P1020 1370P1030 1370P1030

1,890.00 1,890.00 2,090.00 2,110.00 2,110.00

1370P2010 1370P2010 1370P2020 1370P2030 1370P2030

3,120.00 120.00 400.00 420.00 420.003, 3, 3, 3,


2,940.00 2,940.00 130.00 160.00 3,160.003, 3,


4,180.00 180.00 490.00 520.00 4,520.004, 4, 4,


3,100.00 100.00 300.00 330.00 330.003, 3, 3, 3,


4,330.00 330.00 640.00 670.00 4,670.004, 4, 4,

137HRP010 137HRP020 137HRP020 137HRP030 137HRP030

1,010.00 1,700.00 1,700.00 2,120.00 2,120.00

137MHL020 137MHL020 137MHL0202 137MHL0202 137MHL0202

190.00 190.00 370.00 370.00 370.00

137SAB110 137SAB110 137SAB110 137SAB130 137SAB130

545.00 545.00 545.00 780.00 780.00

137RPL010 137RPL010 137RPL010 137RPL020 137RPL020

460.00 460.00 460.00 550.00 550.00


125.00 125.00 125.00 125.00 125.00


390.00 390.00 390.00 390.00 390.00

137PMC060 137PMC050 137PMC080 137PMC060 137PMC030

450.00 450.00 590.00 590.00 830.00

137SSC140 137SSC150 137SSC160 137SSC160 137SSC170

3,100.00 4,080.00 5.400.00 5.400.00 6.200.00


530.00 530.00 530.00 530.00 530.00


500.00 500.00 500.00 500.00 500.00

0.00 0.00 0.00 0.00 0.00

137DCC220 137DCC220 137DCC230 137DCC230 137DCC240

1,170.00 1,170.00 1,360.00 1,360.00 1,450.00

137VQE000 137VQE000 137VQE000 137VQE000 137VQE000

590.00 590.00 590.00 590.00 590.00

0.00 0.00 0.00 0.00 0.00

PRICE in €

CL 25 722 CL 25 723 CL 25 724 CL 25 725 CL 25 726 CL 25 727 CL 25 728 CL 25 729 CL 25 730 CL 25 731

ZENIT HEAT PUMP

kW

Magnetothermic switch of the compressor

(exterior air -10º)

Electrical board ventilation

included included included included included included included included included included

included included included included included included included included included included

CL ROOM FANCOILS

Part No2 TUBES

Part No44 TUBES Item

Airflowm3/h

Performance€ €

Frig/h Kcal/h

«VTP» VERTICAL WITH CASE



VTP-10VTP-20VTP-30VTP-40VTP-50VTP-60VTP-70VTP-80

252304430716920

1.1301.3201.520

1.0841.3421.8923.6204.0335.7887.2678.007

2.5033.2424.5157.628

10.20612.29814.70616.512

324.00360.00391.00426.00505.00559.00633.00734.00

406.00456.00494.00540.00654.00707.00793.00894.00

«VTP/AB»

Same as the above models but also:• On/Off switch• Selector 3 speeds



VTP-10/ABVTP-20/ABVTP-30/ABVTP-40/ABVTP-50/ABVTP-60/ABVTP-70/ABVTP-80/AB

252304430716920

1.1301.3201.520

1.0841.3421.8923.6204.0335.7887.2678.007

2.5033.2424.5157.628

10.20612.29814.70616.512

351.00386.00418.00454.00535.00585.00661.00763.00

433.00482.00521.00568.00683.00733.00820.00922.00

«VTS» HORIZONTAL WITH CASE



VTS-10VTS-20VTS-30VTS-40VTS-50VTS-60VTS-70VTS-80

252304430716920

1.1301.3201.520

1.0841.3421.8923.6204.0335.7887.2678.007

2.5033.2424.5157.628

10.20612.29814.70616.512

356.00392.00423.00466.00545.00606.00678.00791.00

438.00488.00526.00580.00694.00754.00838.00950.00

«VTI» HORIZONTAL OR VERTICAL WITHOUT CASEWITH FILTER IN SUCTION



VTI-10VTI-20VTI-30VTI-40VTI-50VTI-60VTI-70VTI-80

252304430716920

1.1301.3201.520

1.0841.3421.8923.6204.0335.7887.2678.007

2.5033.2424.5157.628

10.20612.29814.70616.512

301.00329.00351.00380.00454.00496.00567.00663.00

384.00425.00454.00494.00602.00644.00727.00822.00

ACCESORIES

CL 04 091CL 04 092

SUPPORTS KIT FOR VERTICAL:PCS Supports kit VTP (10 to 40)PCS Supports kit VTP (50 to 80)

29.0030.00

CL 04 095CL 04 096

OPTIONAL TRAYS:VEV Conex. tray VV (vertical)VEO Conex. tray VO (horizontal)

18.0022.00

BACK VERTICAL COVER

CL 04 111CL 04 112CL 04 113CL 04 114CL 04 115CL 04 116

CPV for VT-10CPV for VT-20CPV for VT-30CPV for VT-40CPV for VT-50 / 60CPV for VT-70 / 80

31.0039.0040.0041.0043.0045.00



nd


VTI (horizontal or vertical)

VTS

VTP

SupportPCS Tray VEV

Tray VEO

BackVertical cover

CL ACCESSORIES FOR ROOM FANCOILS

Code Item €

BOTTOM CLOSING WITH AIR INTAKE

CL 04 121CL 04 122CL 04 123CL 04 124CL 04 125CL 04 126

ZC for VT-10ZC for VT-20ZC for VT-30ZC for VT-40ZC for VT-50 / 60ZC for VT-70 / 80

70.0072.0074.0079.0091.0095.00

HORIZONTAL BACK PANEL

CL 04 141CL 04 142CL 04 143CL 04 144CL 04 145CL 04 146

CPO for VT-10CPO for VT-20CPO for VT-30CPO for VT-40CPO for VT-50 / 60CPO for VT-70 / 80

27.0048.0029.0031.0037.0040.00

PIPE FITTING FOR STRAIGHT AIR CHANNEL OUTLET

CL 04 151CL 04 152CL 04 153CL 04 154CL 04 155CL 04 156

RCD/M for VTI-10RCD/M for VTI-20RCD/M for VTI-30RCD/M for VTI-40RCD/M for VTI-50 / 60RCD/M for VTI-70 / 80

28.0029.0030.0032.0044.0047.00

PIPE FITTING FOR 90°C AIR CHANNEL OUTLET

CL 04 161CL 04 162CL 04 163CL 04 164CL 04 165CL 04 166

RC90/M for VTI-10RC90/M for VTI-20RC90/M for VTI-30RC90/M for VTI-40RC90/M for VTI-50 / 60RC90/M for VTI-70 / 80

43.0044.0045.0047.0059.0065.00

PIPE FITTING FOR STRAIGHT AIR CHANNEL INLET

CL 04 171CL 04 172CL 04 173CL 04 174CL 04 175CL 04 176

RCD/R for VTI-10RCD/R for VTI-20RCD/R for VTI-30RCD/R for VTI-40RCD/R for VTI-50 / 60RCD/R for VTI-70 / 80

30.0030.0032.0038.0047.0050.00

HEATING ELEMENT WITH DOUBLE SAFETY

CL 04 181CL 04 182CL 04 183CL 04 184CL 04 185CL 04 186

• Factory assembledRES for VT-10 de 750 WRES for VT-20 de 1000 WRES for VT-30 de 1500 WRES for VT-40 de 2000 WRES for VT-50 / 60 de 2500 WRES for VT-70 / 80 de 3000 W

103.00110.00115.00135.00158.00171.00

ON-OFF VALVE KIT WITH HOLDERSFOR 2 PIPES MODELS

CL 04 191CL 04 192CL 04 193CL 04 194

Valve 2 pipes for VT-10 / 40Valve 2 pipes for VT-50 / 80Valve 4 pipes for VT-10 / 40Valve 4 pipes for VT-50 / 80

175.00192.00313.00339.00

ADDITIONAL ONE RANK EXCHANGE BATTERYFOR 4 PIPE SYSTEMS

CL 04 131CL 04 132CL 04 133CL 04 134CL 04 135CL 04 136

• Factory assembledB1R for VT-10B1R for VT-20B1R for VT-30B1R for VT-40B1R for VT-50 / 60B1R for VT-70 / 80

83.0096.00

103.00115.00149.00160.00



nd


Pipe fitting for straight airchannel outlet

Pipe fitting for 90°C airchannel outlet

On-Off valve kit2 pipes

On-Off valve kit4 pipes

Grille ZC

Back panel CPO

CL ROOM FANCOIL

VT Series



nd


Vertical model withVTP enclosure

V 2T 4T

Vertical model withoutVTI enclosure

Horizontal model withoutVTI enclosure

Horizontal model withVTS enclosure

TECHNICAL SPECIFICATIONS:Fancoil Model VT-10 VT-20 VT-30 VT-40 VT-50 VT-60 VT-70 VT-80

Vertical model with enclosure VTP CL 04 001 CL 04 002 CL 04 003 CL 04 004 CL 04 005 CL 04 006 CL 04 007 CL 04 008Vertical model with enclosure (3 speeds) VTP/AB CL 04 041 CL 04 042 CL 04 043 CL 04 044 CL 04 045 CL 04 046 CL 04 047 CL 04 048Horizontal with enclosure VTS CL 04 011 CL 04 012 CL 04 013 CL 04 014 CL 04 015 CL 04 016 CL 04 017 CL 04 018Horizontal or Vertical without enclosure VTS CL 04 021 CL 04 022 CL 04 023 CL 04 024 CL 04 025 CL 04 026 CL 04 027 CL 04 028Max. power consumption (Eurovent) W 49 32 65 90 108 146 172 217Max. current consumption A 0,21 0,14 0,28 0,39 0,47 0,63 0,75 0,94Electric resistance (optional) W 750 1000 1500 2000 2500 2.500 3.000 3.000Water contained in the battery 3R/1R Lts 0,6/0,2 0,9/0,3 1,3/0,4 1,9/0,5 2,8/0,9 2,8/0,9 3,6/1,2 3,6/1,2Weight with/without enclosure Kg 14/10 17/13 20/15 23/17 35/25 35/25 47/35 47/35Noise level (Eurovent) MAX/MED/MIN dBA 47/42/34 47/43/36 50/45/36 54/46/35 57/49/43 61/57/50 61/57/52 66/61/57

HEATING POWER

Fan speed

MAX

Air flow m3/h 252 304 430 716 920 1.130 1.320 1.520Calorific value kW 2,91 3,77 5,25 8,87 12,1 14,3 17,1 19,2Water flow Lts/h 254 329 459 776 1.056 1.246 1.498 1.677Head loss m.c.d.a. 0,31 0,69 0,43 1,3 0,69 0,71 1,2 1,49

MIN

Air flow m3/h 147 194 254 300 573 720 946 1.150Calorific value kW 1,9 2,64 3,46 4,35 8,19 9,67 13 15,3Water flow Lts/h 165 215 287 370 658 784 1.134 1.335Head loss m.c.d.a. 0,12 0,27 0,22 0,30 0,34 0,35 0,79 1,06

Air inlet temperature: 20° C - Water temperature: inlet 70° C / outlet 60° CCOOLING POWER

Fan speed

MAX

Air flow m3/h 252 304 430 716 920 1.130 1.320 1.520Cooling effect kW 1,26 1,56 2,2 4,21 4,69 6,73 8,45 9,31Sensible cooling effect kW 0,96 1,12 1,82 3,04 3,87 4,86 5,95 6,62Water flow Lts/h 217 268 378 723 797 1.158 1.452 1.600Head loss m.c.d.a. 0,29 0,59 0,54 1,47 0,96 0,99 1,8 2,13

MIN

Air flow m3/h 147 194 254 300 573 720 946 1.150Total cooling effect kW 0,88 1,13 1,47 2,25 2,91 3,57 6,65 7,67Sensible cooling effect kW 0,64 0,86 1,16 1,52 2,39 3,08 4,57 5,34Water flow Lts/h 150 193 252 385 500 613 1.140 1.320Head loss m.c.d.a. 0,1 0,23 0,18 0,33 0,22 0,23 0,82 1,07

Air inlet temperature: 27° C B.S. / 19° C B.U. - Water temperature: inlet 7° C / outlet 12° C

• Streamlined with no edges• Quiet. Three speed levels of ventilation• Enclosure painted with ivory epoxy (RAL 9010),

resistant to external chemicals• Optional: control panel for the wall model. Selector with

three positions and switch are included.The ceiling model requires a remote thermostat.

• AB Models include thermostat.

CL WATER FANCOILS

Code ModelCoolcap.W

HeatcapW

€

FANCOIL WITHOUT CASE«ECO-OBRA» SERIES

CL 04 501CL 04 502CL 04 503CL 04 515CL 04 517CL 04 519

MUC-06-WFMUC-09-WFMUC-12-WFMUC-18-WF2MUC-30-WF2MUC-41-WF2

1.7502.6803.6405.3508.95012.000

3.0004.0005.9508.30013.35017.900

150.00165.00192.00270.76402.92477.12

«ECO-OBRA» SERIES ACCESSORIES

LC 04 501LC 04 502LC 04 503

Plenum + filter for MUC-06-HFPlenum + filter for MUC-09-HFPlenum + filter for MUC-12-HF

43.0048.0051.00

FANCOIL WITHOUT CASE«HOTEL» SERIES

CL 04 201CL 04 202CL 04 203CL 04 205

VT 10 DVT 20 DVT 30 DVT 40 D

1.4702.1302.9603.939

3.5694.7006.7008.669

255.00277.00297.00321.00

WALL FAN COIL 2 TUBES

CL 04 312CL 04 313CL 04 314

Wall Fan Coil MUP-09-WFWall Fan Coil MUP-12-WFWall Fan Coil MUP-18-WF

2.7003.6004.200

4.0505.4006.300

315.00390.00425.00

DUCT FANCOIL HIGH STATIC PRESSUREALL-PURPOSE 2 AND 4 TUBES

CL 04 250CL 04 251CL 04 252CL 04 253CL 04 254

Water duct MUC-09-WE 2TWater duct MUC-16-WE 2TWater duct MUC-19-WE 2TWater duct MUC-24-WE 2TWater duct MUC-31-WE 2T

2,8304,2605,6807,0309,140

6,1508,85012,06014,89018,840

495.00577.00660.00711.00788.00

FANCOIL TO BUILD IN 2 TUBES


Build in Fan Coil MUE-10-WE 2TBuild in Empotrar MUE-20-WE 2TBuild in Fan Coil MUE-30-WE 2TBuild in Fan Coil MUE-40-WE 2TBuild in Fan Coil MUE-50-WE 2TBuild in Fan Coil MUE-60-WE 2TBuild in Fan Coil MUE-70-WE 2TBuild in Fan Coil MUE-80-WE 2T

1,1101,5602,2004,2104,6906,7308,4509,310

2,9103,7705,2508,87012,10014,30017,10019,200

472.00513.00552.00602.00708.00750.00855.00951.00

WATER FANCOIL CASSETTE 2 TUBES

CL 04 403CL 04 405CL 04 406CL 04 407CL 04 409CL 04 411CL 04 414

MUCS-16 HGMUCS-18 HGMUCS-21 HGMUCS-24 HGMUCS-36 HGMUCS-48 HGMUCS-64 HG

3.8005.1006.1007.3009.500

13.50017.100

4.2005.3006.3008.400

10.50014.70025.000

545.00645.00660.00675.00775.00830.00

1,050.00



nd


Build in fancoil

Duct fancoil

Cassette fancoil

Hotel series

FancoilEco-Obra series

Wall fancoil

Eco-Obra WF2series

CL FANCOIL WITHOUT ENCLOSURE

MUC-WF Series“ECO-OBRA”

EC CORTINAS DE AIREmod. MU-ECO



nd


ModelMUC

06 WFMUC

09 WFMUC

12 WFMUC

16 WFMUC

18 WFMUCS25 WF

MUCS30 WF

MUC36 WF

MUC41 WF

Code CL 04 501 CL 04 502 CL 04 503 CL 04 504 CL 04 505 CL 04 506 CL 04 507 CL 04 508 CL 04 509

Air flowHigh m3/h 340 510 680 850 1.020 1.360 1.700 2.040 2.380

Med. m3/h 260 384 510 638 765 1.020 1.275 1.530 1.785

Low m3/h 168 258 340 425 510 680 850 1.020 1.180

COOLING powerHigh W 1.750 2.680 3.640 4.480 5.350 7.180 8.950 10.600 12.000

Med. W 1.545 2.270 3.020 3.770 4.530 6.040 7.515 8.350 9.750

Low W 1.070 1.650 2.170 2.710 3.250 4.340 5.420 6.050 6.670

Sensible coolingpower

High W 1.271 1.900 2.536 3.171 3.803 5.071 6.339 6.540 8.039

Med. W 1.070 1.573 2.083 2.607 3.125 4.167 5.184 5.443 6.664

Low W 745 1.149 1.511 1.887 2.263 3.022 3.774 4.174 4.821

HEATING powerHigh W 3.000 4.000 5.950 7.300 8.300 11.100 13.350 15.450 17.900

Med. W 2.700 3.600 4.800 5.860 6.800 9.030 10.800 12.600 14.600

Low W 2.400 3.100 3.500 4.330 5.000 6.700 8.010 9.450 10.800

Noise level dB(A) 32/34/37 34/37/39 36/38/41 38/40/43 39/42/45 40/43/46 41/44/48 43/47/50 45/48/52

Power consumption(1 Phase - 50Hz) V

220~240 220~240 220~240 220~240 220~240 220~240 220~240 220~240 220~240

Power W 33 47 56 72 89 111 140 180 221

Intensity A 0,168 0,236 0,282 0,345 0,436 0,61 0,69 0,86 1,04

Water flow l/h 351 520 700 876 1.050 1.400 1.750 1.990 2.324

Pipe diameter pulg. 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"

Weight WA Kg 14,5 16,5 18,5 20 22 32,5 35,5 37 40

1. External static pressure: 30 Pa. * Design for low conduction. 2. Inlet air temperature: 27°C db/19,5°C wb, inlet and outlet water temperature: 12°C.3. Inlet air temperature: 20°C db,inlet water temperature: 60°C, outlet water temperature: 50°C.

Plenum+ Filter

OPTIONAL

Ideal forlarge projects:

etc.

HOTELSHOSPITALS

,,

• BATTERY: Total interchange of heat battery, high qualitycopper pipes and aluminium flaps. Mechanically expandedunder a hydraulic pressure of 14 Mpa in order to avoid leaksand ensure an ideal heat transfer. Optimized transfer speedthanks to a uniformed distribution and a reduced pressureloss.

• DRAIN TRAY: Manufactured in a unique piece to avoid edgesor weld spots. 6 mm of fireproof cell foam clase to avoidcondensation. Without condensation leaks thanks to thestandard length of 300 mm. Full water colection thanks to theextra length.

• FAN: Statically and dynamically balanced centrifugal fan. Highstatic pressure avaliable, low noise level and large air volume.

• ENGINE: Highest eficiency and low power consumption.Depending on the desired residential pressure, the speed ofthe engine might be reset using different electric adaptors. Ballthrust bearings ensure a longer life. Low noise level thanks tothe accurate alignment of the bearings and the use of rubber inorder to absorb the impacts. Enhanced steel axle quenchedwith chromium or nickel to avoid oxidation.

• CONTROL METHOD: 3 speed terminals. 3 positionsselector and switch.

Ask for our electronic and digital pricesSPECIAL FOR FANCOIL!

CL ECO-OBRA TYPE FANCOILWITH PLENUM AND FILTERWF2 series



nd


• SUPPORT STRUCTURE: Made of thick galvanizedmaterial with internal thermal and sound insulation, thesteel is ready to be fixed on a wall/ceiling.

• CUPBOARD: Made of rustproof steel to prevent it fromcorrosion, chemical agents, aliphatic solvents and al-cohol. It is provided with internal sound insulation andprepared to be fixed.

• OUTLET AIR GRID: The grid might be either fixed orwith two adjustable positions (the air flow can be orientedin the other direction when the grid rotates 180°). Its co-lour is ABS grey (similar to RAL7035). It is provided withsmall side doors which facilitate the access.

• HEAT EXCHANGER: The highly efficient battery isequipped with copper and aluminium pipes fixed by me-chanical expansion. It includes coil connectors equippedwith non-spinning system, manual air valves and waterdrain valves. The batteries have been subjected to pres-sure controls of 30 bar, although they will be workingunder 15 bar.

• FAN SECTION: It includes 1 or 2 centrifugal fans withdouble inlet air blades (curved towards the front) and di-rectly attached to the electric engine. It is statically anddynamically balanced and it can be easily removed. Theextensive diameter of the fans (= high air flow and staticpressure) and few revs (= low sound level). The electricengine provides 3 speeds, heating protection (Klixon),Class B working performance condenser, cabling pro-

tected by double isolation. The fan section can be easilyremoved.

• AIR FILTER: Easily dismantled, it includes a metal framespecially designed to support the filters. The filter mightbe reused when washed with water, air pressure orsuction.

• DRAIN PIPES: Ø 21mm (standard in the same side asthe battery conexions and heat isolation.

• PBX: The unit is provided with a conexion terminal panelfor the ventilation speeds.



nd


ModelMUC

06 WF2MUC

09 WF2MUC

12 WF2MUC

16 WF2MUC

18 WF2MUC

25 WF2MUC

30 WF2MUC

36 WF2MUC

41 WF2

Code CL 04 511 CL 04 512 CL 04 513 CL 04 514 CL 04 515 CL 04 516 CL 04 517 CL 04 518 CL 04 519

Air flowHigh m³/h 340 525 660 870 980 1.300 1.600 1.950 2.150Medium m³/h 260 400 560 730 875 1.100 1.350 1.700 1.860Low m³/h 160 300 410 550 700 850 1.090 1.400 1.550

COOLING power*High kW 1.70 2.67 3.55 4.48 5.34 7.00 9.00 10.00 11.00Medium kW 1.35 2.07 3.07 4.00 4.77 6.20 7.40 8.75 9.40Low kW 0.88 1.61 2.35 3.06 4.08 5.00 5.90 7.50 8.18

HEATING power**High kW 2.15 2.98 3.90 4.74 5.45 7.63 9.20 10.70 11.38Medium kW 1.76 2.43 3.46 4.03 5.04 6.81 7.85 9.70 10.30Low kW 1.21 1.96 2.75 3.38 4.29 5.64 6.73 8.48 9.10

Consumption (ESP. 30Pa) High W 59 76 80 101 113 154 206 260 274Sound level (ESP. 30Pa) High dB(A) 40 42 44 46 47 49 50 52 54Water flow m³/h 0.300 0.501 0.627 0.796 0.938 1.237 1.591 1.767 1.944Water pressure loss kPa 10.5 13 15 26 36 20.0 26 31.7 37.6

FanType Centrifugal fan (galvanized steel fan curved towards the front)Quantity 1 2 2 2 2 4 4 4 4

BatteryType Copper pipe without openings and protected by an aluminium flapTest pressure Mpa 2.5Internal volume lts 0.661 0.736 0.961 1.186 1.261 1.741 1.966 2.191 2.416

Engine

Quantity 1 1 1 1 1 2 2 2 2Power supply 220~240V/1Phase/50HzInsulation class BOperate currant(ESP 30Pa)

A 0.26 0.34 0.35 0.45 0.50 0.68 0.91 1.15 1.22

Connection(diameter)

Reel conexion IN - OUT 3/4" - 3/4"Drain pipe R 3/4"Valve (2 or 3 ways) R 3/4"

Working pressure Mpa 1.6Connection method Power connectionNet weight Kg 15 17 22 24 26 36 38 41 43

DimensionsL mm 720 770 920 1070 1120 1470 1620 1770 1920W mm 495H mm 240

* Refrigeration: inlet air temperature 27°C db/19°C wb , inlet water temperature 7°C, outlet water temperature 12°C.** Heating: air temperature 20°C db, inlet water temperature 50ºC.

ModelWF09

WF12

WF16

WF16

WF18

WF25

WF30

WF238

A 648 798 948 998 1348 1498 1648 1798B 590 740 890 940 1290 1440 1590 1740C 770 920 1070 1120 1470 1620 1770 1920D Rp3/4" Rp3/4" Rp3/4" Rp3/4" Rp3/4" Rp3/4" Rp3/4" Rp3/4"d Rp1/2" Rp1/2" Rp1/2" Rp1/2" Rp1/2" Rp1/2" Rp1/2" Rp1/2"

CL UNIVERSAL FANCOIL

WF3 Series



nd


Pipe connection can be changed at siteand easy fan motor maintenance

• SUPPORT STRUCTURE: Made of thick galvanized mate-rial with internal thermal and sound insulation, the steel isready to be fixed on a wall/ceiling.

• CUPBOARD: Made of rustproof steel to prevent it from co-rrosion, chemical agents, aliphatic solvents and alcohol. Itis provided with internal sound insulation and prepared tobe fixed.

• OUTLET AIR GRID: The grid might be either fixed or withtwo adjustable positions (the air flow can be oriented in theother direction when the grid rotates 180°). Its colour is ABSgrey (similar to RAL7035). It is provided with small sidedoors which facilitate the access.

• HEAT EXCHANGER: The highly efficient battery is equip-ped with copper and aluminium pipes fixed by mechanicalexpansion. It includes coil connectors equipped withnon-spinning system, manual air valves and water drainvalves.The batteries have been subjected to pressure con-trols of 30 bar, although they will be working under 15 bar.

• FAN SECTION: It includes 1 or 2 centrifugal fans with dou-ble inlet air blades (curved towards the front) and directlyattached to the electric engine. It is statically and dynami-cally balanced and it can be easily removed. The extensivediameter of the fans (= high air flow and static pressure)and few revs (= low sound level). The electric engine provi-des 3 speeds, heating protection (Klixon), Class B workingperformance condenser, cabling protected by double isola-tion. The fan section can be easily removed.

• AIR FILTER: Easily dismantled, it includes a metal framespecially designed to support the filters. The filter might bereused when washed with water, air pressure or suction.

• DRAIN PIPES: Ø 21mm (standard in the same side as thebattery connections and heat isolation.

• PBX: The unit is provided with a connection terminalpanel for the ventilation speeds.

2 pipe unit can be changed into 4 pipe air item by mounting 1row hot water coil onto the main cooling coil by 4 screws



nd


ModelMUC

06 WF3MUC

09 WF3MUC

12 WF3MUC

16 WF3MUC

18 WF3MUC

25 WF3MUC

30 WF3MUC

36 WF3MUC

41 WF3

Code WITH CABINET CL 04 541 CL 04 542 CL 04 543 CL 04 544 CL 04 545 CL 04 546 CL 04 547 CL 04 548 CL 04 549

Code WITHOUT CABINET CL 04 531 CL 04 532 CL 04 533 CL 04 534 CL 04 535 CL 04 536 CL 04 537 CL 04 538 CL 04 539

Air flow

High m³/h 340 525 660 870 980 1.300 1.600 1.950 2.150

Med. m³/h 260 400 560 730 875 1.100 1.350 1.700 1.860

Low m³/h 160 300 410 550 700 850 1.090 1.400 1.550

COOLING power*

High kW 1.70 2.67 3.55 4.48 5.34 7.00 9.00 10.00 11.00

Med. kW 1.35 2.07 3.07 4.00 4.77 6.20 7.40 8.75 9.40

Low kW 0.88 1.61 2.35 3.06 4.08 5.00 5.90 7.50 8.18

SENSITIVE COOLINGpower*

High kW 1.32 1.94 2.37 3.09 3.53 4.80 6.19 6.93 7.43

Med. kW 1.10 1.63 2.13 2.78 3.27 4.34 5.25 6.36 6.75

Low kW 0.77 1.41 1.74 2.31 2.84 3.71 4.52 5.67 6.06

HEATING power**

High kW 2.15 2.98 3.90 4.74 5.45 7.63 9.20 10.70 11.38

Med. kW 1.76 2.43 3.46 4.03 5.04 6.81 7.85 9.70 10.30

Low kW 1.21 1.96 2.75 3.38 4.29 5.64 6.73 8.48 9.10

Consumption (ESP. 0Pa) High W 48 55 77 85 105 156 151 231 250

Sound level (ESP. 0Pa) High dB(A) 37 39 41 43 45 46 48 50 52

Consumption (ESP 12Pa) High W 59 76 80 101 113 154 206 260 274


Consumption(ESP. 30Pa)

High W 66 76 95 113 131 182 238 284 277


Consumption (ESP 50Pa) High W 72 83 101 130 145 230 258 268 280


Water flow m³/h 0.300 0.501 0.627 0.796 0.938 1.237 1.591 1.767 1.944

Water pressure loss kPa 10.5 13 15 26 36 20.0 26 31.7 37.6

FanType Centrifugal fan (galvanized steel fan curved towards the front)

Quantity 1 2 2 2 2 4 4 4 4

Battery

Type Copper pipe without openings and protected by an aluminium flap

Presión de prueba Mpa 2.5

Internal volume lts 0.661 0.736 0.961 1.186 1.261 1.741 1.966 2.191 2.416

Engine

Quantity 1 1 1 1 1 2 2 2 2

Power supply 220~240V/1Phase/50Hz

Operate currant(ESP 30Pa)

A 0.26 0.34 0.35 0.45 0.50 0.68 0.91 1.15 1.22

Connection(Ø)

Reel conexion IN - OUT 3/4" - 3/4"

Drain pipe 3/4"

Valve (2 or 3 ways) 3/4"

Working pressure Mpa 1.6

Connection method Power connection

Net weight Kg 15 17 22 24 26 36 38 41 43

* Refrigeration: inlet air temperature 27°C db/19°C wb , inlet water temperature 7°C, outlet water temperature 12°C.** Heating: air temperature 20°C db, inlet water temperature 50ºC.*** The Air Flow, Cooling power and Heating power are tested under ESP 0Pa and without filter**** ESP12, 30, 50 Pa are for WF3 without cabinet



nd


MUC-6-WF3 MUC-9-WF3

MUC-12-WF3 MUC-16-WF3

MUC-18-WF3 MUC-25-WF3

MUC-41-WF3MUC-30-WF3

Air flow model 50 Pa

CL UNIVERSAL FANCOIL

WF3 Series



nd


Auxiliar tray horizontal

Auxiliar tray vertical

WMU-FEET

Code ModelCAPACITY (kW)

€Cooling Heating

CL 04 541CL 04 542CL 04 543CL 04 544CL 04 545CL 04 546CL 04 547CL 04 548CL 04 549

MUC 06 WF3/SEMUC 09 WF3/SEMUC 12 WF3/SEMUC 16 WF3/SEMUC 18 WF3/SEMUC 25 WF3/SEMUC 30 WF3/SEMUC 36 WF3/SEMUC 41 WF3/SE

1.702.673.554.485.347.009.0010.0011.00

2.152.983.904.745.457.639.2010.7011.38

252.00272.00303.00340.00361.00524.00547.00608.00636.00

• With cabinet 2 pipes

Code ModelCAPACITY (kW)

€Cooling Heating

CL 04 531CL 04 532CL 04 533CL 04 534CL 04 535CL 04 536CL 04 537CL 04 538CL 04 539

MUC 06 WF3/CEMUC 09 WF3/CEMUC 12 WF3/CEMUC 16 WF3/CEMUC 18 WF3/CEMUC 25 WF3/CEMUC 30 WF3/CEMUC 36 WF3/CEMUC 41 WF3/CE

1.702.673.554.485.347.009.0010.0011.00

2.152.983.904.745.457.639.2010.7011.38

322.00342.00384.00426.00437.00622.00644.00681.00731.00

• Without cabinet 2 pipes

Code Model €

AUXILIAR TRAYHORIZONTAL

LC 04 506LC 04 507

EDPHR-U right sideEDPHL-U left side

20.0020.00

AUXILIAR TRAYINSTALLATION

LC 04 508 EDPV-U 14.00

SET 2 FEET ABS

LC 04 509 WMU-FEET To be mounted in the ground 24.00

EXTRA BATTERY 4 TUBES

LC 04 510LC 04 511LC 04 512LC 04 513LC 04 514LC 04 515LC 04 516LC 04 517LC 04 518

Battery for MUC 06Battery for MUC 09Battery for MUC 12Battery for MUC 16Battery for MUC 18Battey for MUC 25Battery for MUC 30Battery for MUC 36Battery for MUC 41

50.0061.0072.0081.0089.00

137.00145.00161.00174.00

• Fittings

CL WALL FANCOIL

MUP-WF Series



nd


• Equipped as standard with remote control• Possibility of connection to wall thermostat• Tangencial fan• The air guidance system is manual for the

horizontal direction and motorized for thevertical direction

• Double pipe models

Remotecontrol(standard)

Wire control(optional)V 2T

TECHNICAL SPECIFICATIONS

Model MUP-09-WF MUP-12-WF MUP-18-WF

Code CL 04 312 CL 04 313 CL 04 314

COOLING power* W 2700 3600 4200

HEATING power ** W 4050 5400 6300

Absorbed power W 50 60 60

Airflow (Max) m3/h 550 680 850

Airflow (Min) m3/h 367 532 616

Supply voltage V-Hz-Ph 230 - 50 - 1 230 - 50 - 1 230 - 50 - 1

Sound pressure *** dB(A) 40 43 48

Water flow m3/h 0,45 0,6 0,7

Head loss Kpa 24 44 45

Dimensions mm 845 x 275 x 180 940 x 298 x 200 940 x 298 x 200

Net weight Kg 11 13 13

Water connections pulg 1/2" 1/2" 1/2"

NOTE: preliminary data, check our WEBSITE.*Refrigeration: Internal temperature 27°C BS 19°C BH. Water temperature 7-12°C; ** Heating: Room temperature 20°C. Water temperature 70-60°C

CL FANCOIL CASSETTE

MUCSW-HG SeriesWITH AIR RENOVATION



nd


• Extremely quiet• Side air outlet• Low consumption• New design• Remote control through infrared rays• Centrifugal fan• Orientable air flowrate• 2 Tubes• Connection possibilities

master/slave. When you connectthis unit, all units switch on.

Orifices marked for therenovation and air outlet

Protection fan grille to avoidintrusions

Easy maintenance. Thefan and motor are

deattachable

Purgers of water in inletand outlet

TECHNICAL SPECIFICATIONS

ModelMUCSW-

16HGMUCSW-

18HGMUCSW-

21HGMUCSW-

24HGMUCSW-

36HGMUCSW-

48HGMUCSW-

60HGMUCSW-

64HG

Code CL 04 403 CL 04 405 CL 04 406 CL 04 407 CL 04 409 CL 04 411 CL 04 413 CL 04 414

REFRIGER.capacity

Total W 3800 5100 6100 7300 9500 13500 15300 17100

Sensible W 2700 3600 4300 5100 6700 9500 10700 12300

HEATING capacity W 4200 5300 6300 8400 10500 14700 23000 25000

Absorbed power W 60 76 90 132 152 220 330 408

Air flowrate m3/h 680 850 1020 1360 1700 2380 2890 3400

Sound level (max.) dB(A) 42 44 45 47 49 53 57 65

Water flow rate l/h 653 877 1049 1255 1634 2322 2640 2720

Loss of charge battery Kpa 11 16 18 19 17 22 36 48

Pipes (inlet./outlet) pulg. 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"

Dimensions (LxPxH) mm 580x580x290 701x701x290 811x811x290 960x960x290

Weight Kg 24 29,5 29,5 37 37 59 59 59

* Power: 220V-240V/1/50HzNominal power COOL: Temperature bulb 27°C. Temperature wet bulb: 19,5°C. Water entry: 7°C. Exit : 12°CNominal HEATING: Temperature dry bulb: 20°C. Water temperature: 60°C



nd


EC AIR CURTAIN

mod. MU-ECO

• Metal case• Several sizes (90-180 cm.)• Microprocessor controlled• Remote control (see model)• High speed• Max renovation• Low noise level

Mods. AIR ONLYwith Remote Control (*) or Wall Control (**)

Mods. with HEATING

Keeping the doors open implies a considerable waste of energyin most facilities. A correct installation of the air curtain can redu-ce up to 90% the loss of energy caused by open doors.Air curtains not only help to save energy but also contribute to ahealthy environment. Doors can be open even in winter time. Aircurtains draw a warm welcome.

*

**

(AV 51 101)

Model MU-ECOAIR ONLY

W/ REMOTE CONTROLWITH HEATING

ELECTRIC SINGLE PHASEWITH HEATING

ELECTRIC THREE PHASE

09 12 15 09/6R 12/8R 15/8R 09/6R3 12/8R3 15/8R3

Air Flow m3/h 1.020 1.360 1.700 912 1.280 1.670 912 1.280 1.670

Heating capacity kW — — — 6 7,2 9 6 7,2 9

Power supply V-Hz-Ph 220 - 50 - I 220 - 50 - I 380 - 50 - III

Speed nº 1 1 1

Max mounting height m 3 3 3

Cooling consumption W 316 422 527 120 180 250 120 180 250

Heating consumption W — — — 6.120 7.380 9.250 6.120 7.380 9.250

Control Remote Remote and manual Remote and manual

Noise level dB(A) 53 54 56 55 57 59 55 57 59

Height mm 230 230 230 221 221 221 221 221 221

Width mm 900 1.200 1.500 900 1.200 1.500 900 1.200 1.500

Depth mm 212 212 212 183 183 183 183 183 183

Net weight kg 15 20 23,5 15,5 19,5 23,5 15,5 19,5 23,5

Code. EC 06 411 EC 06 412 EC 06 413 EC 06 414 EC 06 415 EC 06 416 EC 06 417 EC 06 418 EC 06 419

Price € 253.00 281.00 395.00 389.00 457.00 552.00 389.00 457.00 552.00

0,01 m

0,5 m

1,0 m

1,5 m

2,0 m

2,5 m

3,0 m

6,4

4,9

4,0

3,5

3,0

2,5

2,0

11,3

6,3

3,7

2,8

2,4

2,3

2,2m/s m/s

Mod.AIR ONLY

Mod.HEATING

EC CENTRIFUGAL INDUSTRIALAIR CURTAINMU-ECO GC Series• Centrifugal fan• High efficiency design• Low noise level• High flow rate• Static pressure• Metallic case, resistant

to fire• Maximum installationheight: 6 mts• Easy installation• Supply: 220V-50HZ-1 Ph



nd


Motor double shaft Metallic fan

Centrifugal highcapacity

Metallic case Maximum installationheight

6m

Metallic fan

0,0 m

1,0 m

GC

28 m/s

15 m/s

2,0 m

3,0 m

4,0 m

5,0 m

6,0 m

9 m/s

7 m/s

5,6 m/s

4,5 m/s

3,5 m/s

Model MU-ECO 10 GC MU-ECO 12 GC MU-ECO 15 GC

Air flow rate m3/h 3.709 3.709 3.563

Motor power kW 1,5 1,5 2,25

Absorbed current A 9,44 9,44 14,42

Air speed m/s 30 30 30

Sound level dB(A) 72 72 72

High mm 287 287 287

Long mm 1.000 1.200 1.500

Deep mm 297 297 297

Code EC 06 420 EC 06 424 EC 06 425

Price € 605.00 750.00 1,100.00



nd


EC AIR CURTAIN

SILVER model

• Innovative design without visible screws

• Aluminium and ABS

• Remote control and control panel

• Operation indicator

Thin metal blades allow a better control ofthe air flow

Integrated design with metalside cover

Keys with indicator lights

Easy to open, practical design which does not use screws on the exterior cover.

The rustproof casing is made of high resistance aluminium and high quality ABS.

A guide bar in an exclusive design allows the air flow to be directed as desired and to be adapted to differentenvironments.

Can be controlled both by remote control and control panel. Includes a high/low speed botton.Equipped with an optimised machinery which ensures an efficient and secure operation.

Model MU-ALU 09 MU-ALU 12 MU-ALU 15 MU-ALU 18 MU-ALU 20

Code EC 06 475 EC 06 476 EC 06 477 EC 06 478 EC 06 479

Air flowH (high) m3/h 1.100 1.500 1.900 2.280 2.520

L (low) m3/h 900 1.200 1.500 1.800 2.100

Speeds nº 2 2 2 2 2

Remote control YES YES YES YES YES

Manual control YES YES YES YES YES

ConsumptionH (high) W 230 290 380 450 470

L (low) W 200 260 350 420 440

Power supply V-Hz-Ph 220-50-1 220-50-1 220-50-1 220-50-1 220-50-1

Sound levelH (high) dB(A) 52 53 55 57 58

L (low) dB(A) 49 50 52 55 56

Net weight Kg 13 15,5 20 23,5 27

Dimensions

Length mm 900 1200 1500 1800 2000

Height mm 230 230 230 230 230

Depth mm 215 215 215 215 215

Price € 346.00 400.00 530.00 645.00 686.00



nd


EC AIR CURTAIN

INOX model

• Stainless steel casing

• Special design

• Manual control

• Two speeds

• Ideal for salty environments

High performance,high efficiency

LUXUS

Model MU-IN 09 MU-IN 12 MU-IN 15 MU-IN 18

Code EC 06 471 EC 06 472 EC 06 473 EC 06 474

Air flow H (high) m3/h 1.100 1.500 1.900 2.280

L (low) m3/h 900 1.200 1.500 1.800

Speeds nº 2 2 2 2

Remote control NO NO NO NO

Manual control YES YES YES YES

Consumption H (high) W 230 290 380 450

L (low) W 200 260 350 420

Power supply V-Hz-Ph 220-50-1 220-50-1 220-50-1 220-50-1

Sound level H (high) dB(A) 52 53 55 57

L (low) dB(A) 49 50 52 55

Net weight Kg 14 18,5 25 30

Dimensions Length mm 900 1200 1500 1800

Height mm 241 241 241 241

Depth mm 215 215 215 215

Price € 465.00 555.00 700.00 855.00

The exterior casing is made of stainless steel, easy to clean and highly resistant to fire.

Blades in an exclusive design allows the air flow to be directed as desired and to adapt todifferent environments.

Includes a high/low speed botton.

Equipped with an optimised machinery which ensures an efficient and secure operation.



nd


EC AIR CURTAINS

Modelo INOX

• Horizontal distribution• Innovative design• Moveable discharge louver• White surface RAL 9010

TECHNICAL CHARACTERISTICS:

ModelONLY AIR W/ELECTRIC BATTERY W/WATER BATTERY

AC1000HA AC1500HA AC2000HA AC1000HE9 AC1500HE12 AC2000HE18 AC1000HW12 AC5000HW18 AC2000HW24

Code EC 06 335 EC 06 336 EC 06 337 EC 06 341 EC 06 342 EC 06 343 EC 06 347 EC 06 348 EC 06 349

Supply 230 230 230 400 400 400 230 230 230

Calorific power kW – – – 9 12 18 12 18 24

Thermal rise ΔT – – – 25/35 26/33 23/29 26/33 23/29 20/27

Speeds nº 2 2 2 2 2 2 2 2 2

Air flow rate m3/h 1850/2300 2400/3300 4100/5000 1850/2300 2400/3300 4100/5000 1850/2300 2400/3300 4100/5000

Outlet speed m/s 8,5/11 8,5/11 8,5/11 8,5/11 8,5/11 8,5/11 6,4/9,4 6,4/9,4 6,4/9,4

Intensity A 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5

Control remote Included Included Included Included Included Included Included Includo Included

Sound level dB(A) 55/60 55/60 55/60 55/60 55/60 55/60 55/60 55/60 55/60

Weigth Kg 39,5 49 60 39,5 49 60 39,5 49 60

Height/depth mm 395/350 395/350 395/350 395/350 395/350 395/350 395/350 395/350 395/350

Length mm 1138 1638 2138 1138 1638 2138 1138 1638 2138

Colour RAL 9010 RAL 9010 RAL 9010 RAL 9010 RAL 9010 RAL 9010 RAL 9010 RAL 9010 RAL 9010

0 m

1 m

2 m

3 m

4 m

11 m/s 11 m/s

5,5 m/s 5,5 m/s

3,7 m/s 3,7 m/s

3,0 m/s 2,5 m/s

2,1 m/s 1,6 m/s

HA/HE HW

1138/1638/2138

350

395

Code Model A.M.R.mts.

Lengthmm kW/h €

ONLY AIR CURTAINS

EC 06 443EC 06 444EC 06 445

AC1000 SHAWAC1500 SHAWAC2000 SHAW

444

1.1381.6382.138

———

1,036.001,341.001,696.00

CURTAINS WITH ELECTRIC BATTERY

EC 06 446EC 06 447EC 06 448

AC1000HE9AC1500HE12AC2000HE18

444

1.1381.6382.138

91218

1,469.001,806.002,257.00

CURTAINS WITH WATER BATTERIES

EC 06 449EC 06 450EC 06 451

AC1000HW12AC1500HW18AC2000HW24

444

1.1381.6382.138

121824

1,482.002,015.002,431.00

EC BUILT IN CURTAIN

ACR Series• Built in dropped ceiling• White surface RAL9010

Code Model A.M.R.mts.

Lengtthmm kW/h €

AIR CURTAINS- ONLY AIR

EC 06 452EC 06 453EC 06 454EC 06 455EC 06 456

ACR100SAACR150SAACR200SAACR120HAACR180HA

33344

1.2421.5422.0591.2101.810

–––––

1,775.002,035.002,937.002,296.003,124.00

AIR CURTAINS - ELECTRIC BATTERY

EC 06 457EC 06 458EC 06 459EC 06 460EC 06 461

ACR100SE9ACR150SE12ACR200SE18ACR120HE12ACR180HE18

33344

1.2421.5422.0591.2101.810

912181218

2,258.002,572.003,335.002,927.003,908.00

AIR CURTAIN - WATER BATTERY

EC 06 462EC 06 463EC 06 464EC 06 465EC 06 466

ACR100SW9ACR150SW12ACR200SW18ACR120HW12ACR180HW18

33344

1.2421.5422.0591.2101.810

912181218

2,258.002,586.003,335.003,015.004,024.00



nd



Model ACR100SA

ACR150SA

ACR200SA

ACR120HA

ACR180HA

ACR100SE9

ACR150SE12

ACR200SE18

ACR120HE12

ACR180HE18

ACR100SW9

ACR150SW12

ACR200SW18

ACR120HW12

ACR180HW18

Code EC 06

452

EC 06

453

EC 06

454

EC 06

455

EC 06

456

EC 06

457

EC 06

458

EC 06

459

EC 06

460

EC 06

461

EC 06

462

EC 06

463

EC 06

464

EC 06

465

EC 06

466

SupplyV 230 230 230 230 230 400 400 400 400 400 230 230 230 230 230

Power heating kW – – – – – 4,5/9 6/12 9/18 6/12 9/18 9 12 18 12 18

Thermal rise ΔT – – – – – 20/26 19/25 19/21 23/29 20/27 20/26 19/25 19/21 23/29 20/27

Speed 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

Air flow rate m3/h 1164/1646

1475/2085

2013/2851

1300/2300

1600/3300

1164/1646

1475/2085

2013/2851

1300/2300

1600/3300

1100/1600

1400/2000

1900/2750

1300/2300

1600/2300

Air speed m/s 4,3/7 5,4/8,4 8,5/11 4,3/7 5,4/8,4 8,5/11 4,3/7 5,4/8,4 8,5/11

Intensity A 3 3 3 5 5 14,2 18,2 27,2 29,5 38,4 3 3 3 5 5

Control remote Included Included Included

Sound level dB(A) 59/64 62/66 55/60 59/64 62/66 55/60 59/64 55/60

Weight Kg 26 32 47 36 53 28 34 49 38 55 28 34 49 38 55

Height/Depth mm 200/454 221/608 200/454 221/608 200/454 221/608

0 m

1 m

2 m

3 m

4 m

7 m/s 8,4 m/s 11 m/s

3,5 m/s 4,2 m/s 5,5 m/s

1,6 m/s 2,1 m/s 3,7 m/s

0,8 m/s 1 m/s 3,0 m/s

2,1 m/s

AIR SPEED

ACR100/150

ACR200

ACR120/180



nd


CL ENTHALPICHEAT RECOVERY UNITSMURE Series

• 2 operating speeds• Equipped with flat and corrugated sheets• Cross flow• TOTAL heat recovery of up to 75%• With a great permeability. The space between the fibres

is tiny to avoid pollution

Model MURE 350 MURE 500 MURE 800 MURE 1000 MURE 1500 MURE 2000

Air flow (High/Medium/Low) m3/h 350/350/270 500/500/360 800/800/625 1000/780/650 1500 2000

Consumption (High/Medium/Low) W 140/125/115 190/175/150 320/273/205 450/375/330 1260 1278

Sound level (High/Medium/Low) dB(A) <31/29/<25 <33/<31/<27 <38/<36/<32 <39/<37/<33 51 53

Supply V/Hz/Phase 220-240/50/1 380/50/3

Recovery efficiency (H/M/L) % 72/72/75 72/72/75 72/72/75 72/72/75 70 70

Static pressure (High/Medium/Low) Pa 90/60/30 100/60/30 150/100/40 115/75/35 160 170

Net weight Kg 37 43 71 80 160 175

Dimensions mm 882x804x270 882x904x270 1500x1045x390 1500x1295x390 1500x540x1200 1550x540x1400

PricePart No. CL 41 903 CL 41 904 CL 41 905 CL 41 906 CL 41 907 CL 41 908

€ 810.00 965.00 1,490.00 1,950.00 3,000.00 3,540.00

Roof

Outside air inlet duct

Air supply

Air outletReturn

Return

Air outlet duct

Discharge air

OPTIONAL

CL 92 918)

for mods. 1000,1500 and 2000(Part No.

WALL CONTROL PANEL



nd


41 HEAT RECOVERY SYSTEM• MU-RECO F6+F6 Series

Code Item Flow rate(m3/h) €


MU-RECO 500 F6MU-RECO 800 F6MU-RECO 1200 F6MU-RECO 2000 F6MU-RECO 3000 F6MU-RECO 4000 F6MU-RECO 5000 F6MU-RECO 6000 F6

500950

1.3002.0503.1504.2505.3506.150

1,437.001,733.002,075.002,121.002,568.003,492.004,916.004,974.00

• MU-RECO F6/F6+F8 Series



MU-RECO 500 F6+F8MU-RECO 800 F6+F8MU-RECO 1200 F6+F8MU-RECO 2000 F6+F8MU-RECO 3000 F6+F8MU-RECO 4000 F6+F8MU-RECO 5000 F6+F8MU-RECO 6000 F6+F8

500950

1.3002.0503.1504.2505.3506.150

1,688.001,984.002,326.002,395.002,835.003,834.005,326.005,385.00

• MU-RECO “S” F7+F7 Series


CL 41 942CL 41 943CL 41 944CL 41 945CL 41 946CL 41 947

MU-RECO 500 F7 SMU-RECO 800 F7 SMU-RECO 1800 F7 SMU-RECO 3000 F7 SMU-RECO 4500 F7 SMU-RECO 5600 F7 S

400800

2.1003.4004.5005.600

1,468.001,802.002,215.003,012.004,320.004,656.00

• MU-RECO F7/F7+F9 Series


CL 41 962CL 41 963CL 41 964CL 41 965CL 41 966CL 41 967

MU-RECO 500 F7/F7+F9MU-RECO 800 F7/F7+F9MU-RECO 1800 F7/F7+F9MU-RECO 3000 F7/F7+F9MU-RECO 4500 F7/F7+F9MU-RECO 5600 F7/F7+F9

400800

2.1003.4004.5005.600

1,751.002,106.002,575.003,476.005,196.005,582.00

F6+F6

F6/F6+F8

F7+F7

Impulsion: F6Return: F6

Impulsion:F6+F8

Return: F6

Impulsion: F7Return: F7

Impulsion:F7+F9

Return: F7

F7/F7+F9

CL CONFIGURABLEHEAT EXCHANGERSMU-RECO Series



nd


CodeF6

CodeF6+F8 Model

Maximumflow-rateF6 (m3/h)

Speed(r/min)

Tension(V)

Intensity(A)

Motorpower

(W)

Thermalefficicency

(%)

SoundleveldB (A)

Weight(Kg)

CL 41 922 CL 41 932 MU-RECO-0500 500 1400 1x230 1,2 2x140 50 42 33

CL 41 923 CL 41 933 MU-RECO-0800 950 1420 1x230 2,7 2x310 52 49 45

CL 41 924 CL 41 934 MU-RECO-1200 1300 1425 1x230 4,0 2x450 52 53 67

CL 41 925 CL 41 935 MU-RECO-2000 2050 1350 1x230 4,0 2x450 52 48 86

CL 41 926 CL 41 936 MU-RECO-3000 3150 1250 1x230 5,4 2x600 54 52 112

CL 41 927 CL 41 937 MU-RECO-4000 4250 900 3x400 3,6 2x1100 55 46 167

CL 41 928 CL 41 938 MU-RECO-5000 5350 1280 3x400 3,5 2x1500 53 54 182

CL 41 929 CL 41 939 MU-RECO-6000 6150 1450 3x400 6,5 2x3000 50 56 205

CONFIGURATION:


With cross-flow panels to installhorizontally

CHARACTERISTICS:• Exchanger of aluminium plaques with performance levels of 52% to

55%• Choice Different positions for outlet and inlet• Incorporated filtres, quality F6 and F6+F8• Galvanised steel box with sound insulation

CONSTRUCTION MATERIALS:• Structure with a galvanised steel layer• Inlet and outlet have watertight joint• Exchangable inlet/outlet• Access doors to render cleaning and maintenance tasks easier

MODELS:• Horizontal• Environmental: Renews air• If requested: Adiabatic module

AF: Exterior fresh airIL: Air impelled in the interiorSV: Stale air outletEL: Air impelled in the exterior

Models MU-RECO-0500MU-RECO-0800MU-RECO-1200

Rest of the models

(F6)

(F6+F8)+

Filter combinations:




nd

DIMENSIONS mm:

Model: A B L ØD H1 H2 H3 W W1

MU-RECO-0500 324,5 630 630 200 160 310 160 148 148

MU-RECO-0800 346 800 800 250 210 380 210 181 181

MU-RECO-1200 396 1000 1000 315 260 480 260 198 198

MU-RECO-2000 500 1050 1050 315 250 550 250 300 270

MU-RECO-3000 600 1100 1200 315 260 660 280 380 365

MU-RECO-4000 610 1500 1500 450 340 825 335 400 380

MU-RECO-5000 820 1700 1500 450 420 745 335 400 400

MU-RECO-6000 820 1700 1500 450 420 745 335 400 400

In F6+F8 ,there are 550 additional mm in the outlet impulsion of local air

CHARACTERISTIC CURVES:

MU-RECO-05 / 08 / 12 / 20 MU-RECO-30 / 40 / 50 / 60

CL HEAT EXCHANGER

MU-RECO S Series(Filtres F7+F7)

• Flow rates de 450 a 5.600 m3/h.• Horizontal layout.• Motors: IP20 (Ranges 500, 800, 1800, 3000 and 5600).

IP55 (Range 4500).• Side exchangable panels allowing several combina-

tions.



nd


LOW SOUND LEVELBox with acoustic fireproof in-sulation M0 of 25 mm thick.

EASY ASSEMBLYSingle-phase models withsupports for assembly indropped ceilings.

WATERTIGHT BOXRubber joints in the lock of thelid and the inlet and outlet wa-tertight flanges.

STURDYHigh quality materials with alu-minium corners,which providegreat sturdiness.

CONDENSED DRAINAGEDrainage allowing for the wateroutlet of condensed liquid.

PRESSURE INTAKEPressure intake before and af-ter the filters to control theircleanliness.

WATERTIGHT TERMINALBOXSingle-phase models with ter-minal external watertightbox, IP55.

EASY AND MULTICHOICE ASSEMBLYIts design allows for the coniguration of the dessign by the user himself.There are many possibilities to exchange the panels, therefore, it ispossible to locate, in many cases, the connections of cases directlythrere, according to the requirements specified. .

HIGHLY EFFICIENTFILTRES2 Filtres: F7 for the contribu-tion of air (efficiency >80%) +F7 for air extraction (efficienc-y>90%).

CHARACTERÍSTICS:

Heat exchangers on plastified galvanised boxes, 25 mmthick double-wall, thermoacoustic fireproof insulation,class M0, adjustable inlet and outlet to be installedhorizontally and with watertight joint, filter F7 to provide air(efficiency > 80%) and filter F7 for air extraction (efficiency> 90%). They have two centrifugal fans with a motor.



nd



Code ModelFantype

Speedr.p.m.

Speednumber

MotorPower

kW

IntensityAbsorption max. (A)

Max.flowrate

m³/h

ProtectionIP

Efficiency%*a 230V a 400 V

CL 41 942 MU-RECO 500 F7 S 133/126 3000 4 2 x 0,150 2 x 0,66 - 400 20 50.7

CL 41 943 MU-RECO 800 F7 S 146/180 3000 4 2 x 0,355 2 x 1,55 - 800 20 53.9

CL 41 944 MU-RECO 1800 F7 S 9/7 1500 3 2 x 0,373 2 x 3,9 - 2100 20 51.6

CL 41 945 MU-RECO 3000 F7 S 10/8 1500 3 2 x 0,550 2 x 4,0 - 3400 20 52.5

CL 41 946 MU-RECO 4500 F7 S 10/10 1500 1 2 x 0,750 - 2 x 3,1 4500 55 54.0

CL 41 947 MU-RECO 5600 F7 S 12/9 1500 1 2 x 1,500 - 2 x 5,2 5600 20 52,5

* Values with the following conditions: T interior air: -5°C, T interior air +20°C with interior HR of 50% / Maximum flow-rate

➊

➏

➋

➎➍

➌

EASY MAINTENANCE: Quick access to filters from the lower or higher part and sides. Easy access to clean exchanger from the lower orhigher part (see model).

DIMENSIONS:

Model A B D L H2 W

MU-RECO 500 345 640 200 640 175 172

MU-RECO 800 360 820 250 820 220 180

MU-RECO 1800 535 1040 315 1040 275 315

MU-RECO 3000 630 1270 355 1270 333 360

MU-RECO 4500 855 1300 450 1200 315 428

MU-RECO 5600 855 1300 450 1200 315 428

CL HEAT RECOVERY SYSTEMSCONFIGURABLEMU-RECO F7/F7+F9 Series

• Flow rate from 450 to 5,600 m3/h.• Horizontal distribution.• Motors: IP20 (Ranges 500, 800, 1800, 3000 and 5600).

IP55 (Range 4500).• Exchangebale side boards to allow different combinations.



nd



Code Model Fan type Speedr.p.m.

Speednumbers

Power MotorkW

Flow rate(m³/h) Efficiency %*

CL 41 962 MU-RECO 500 F7/F7+F9 133/126 3000 4 2 x 0,150 400 50,7

CL 41 963 MU-RECO 800 F7/F7+F9 146/180 3000 4 2 x 0,355 800 53,9

CL 41 964 MU-RECO 1800 F7/F7+F9 9/7 1500 3 2 x 0,373 2100 51,6

CL 41 965 MU-RECO 3000 F7/F7+F9 10/8 1500 3 2 x 0,550 3400 52,5

CL 41 966 MU-RECO 4500 F7/F7+F9 10/10 1500 1 2 x 0,750 4500 54,0

CL 41 967 MU-RECO 5600 F7/F7+F9 12/9 1500 1 2 x 1,500 5600 52,5

IDA1HOSPITALS

LABORATORIESNURSERIES

ETC.

DIMENSIONS:

Model A B C D E F L H1 H2 W

MU-RECO 500 345 640 270 200 400 200 640 175 175 172

MU-RECO 800 360 820 320 250 500 250 820 220 220 180

MU-RECO 1800 535 1040 500 315 600 315 1040 300 275 315

MU-RECO 3000 630 1270 570 355 600 355 1270 333 333 360

MU-RECO 4500 855 1300 570 450 900 450 1200 315 315 428

RITERITE

CHARACTERISTICS:

Heat recovery systems in galvanised plastified white steel,double wall 25 mm thick, thermoacoustic fireproof insulationclass M0, inlet and outlet to be adjusted in a horizontaldistribution and mouths with sealed joints, filtre F7+F9 for theair input (filtering efficiency >80%) and filtre F7 for the air removal(effficiency > 90%). They have two double intake centrifugal fanswith motor.

VERSATILE INSTALLATION:

Its design allows it to be set by the user in situ.

There are many possible combinations to exchange the panels.This allows to place the most part of the connections (dischargeand aspiration) directly into the works according to the specificrequirements.

HU DEHUMIDIFIERS

MH 10• Manual control• Water full indicator• Uninterrupted drainage option• Compact design• Lightweight

MH 20 “Electronic”• Electronic operation• Low energy consumption and very silent operation• Humidistat function allows setting of desired humidity levels,• Quick dehumidifying feature• Folding handle for easy transport• Water level display

MH 40• Completely automatic• Extremely silent• Auto defrost• Water pump included• Uninterrupted wastepipe

MH 60-N• Smart and uptodate design• High extraction rate• High efficiency rotary compressor• Tank for condensed (9 lts.)• Uninterrupted drainage• Quiet operation (46 dB-A)

MH 90/MH 120• Digital control with microcomputer• Indicates room humidity• Delayed start and defrost mode• Timer program up to 12 hours• Adjustable air outlet (low/high)• Optional uninterrupted drainage• Rolling caster wheels for easier transport




nd

MH 20

MH 120MH 90

MH 10

MH 40

Model MH 10 MH 20 MH 40 MH 60-N MH 90 MH 120

Code HU 10 503 HU 10 502 HU 10 504 HU 10 509 HU 10 507 HU 10 508

Power supply V - Hz 220/240 - 50 220/240 - 50 220/240 - 50 220/240 - 50 220/240 - 50 220/240 - 50

Power consumption W 220 360 550 800 1.390 1.520

Dehumidification litres/day* 10 20 40 60 90 120

Air flow m3/h 130 150 180 135 600 800

Dimensions W mm 325 380 410 505 480 600

H mm 452 545 710 625 440 382

d mm 290 262 850 300 970 1000

Weight Kg 10 14 21 19 45 52

Refrigerant R 134a R 134a R 407C R410a R410a R410a

Price € 180.00 312.00 425.00 675.00 810.00 900.00

MH 60-N




nd



nd

RefreshingHumidifyingHeatingPurifying

Refreshing

Purifying

HumidifyingHeating

44 FFUUNNCCTTIIOONNSS

TIMER WIND SPEED WARMWARM COOL

0.5H 1H 2H 4H WIND HI MI LO PTC1 PTC2 ICYBREEZE POWER

TIMER WIND SPEED HEAT COOL

0.5H 1H 2H 4H WIND HI MI LO PTC1 PTC2 ICYBREEZE POWER

310 mm

80

mm

CL EVAPORATIVEPORTABLE CONDITIONERAM-37 Series

• Remote control and panel control

• Adiabatic cooling system reducestemperature from 2 to 6°C.

• Water tank: 8 liters

• Two heating stages (1000W/ 2000W)

• Double air direction

• 3 ventilation speed modes

• Timer


Model AM-37

Code CL 20 223

Voltage AC220 240V/50Hz

Cooling consumption 70W

Heating consumption 1000/2000W

Protection Class II

Air volume 350m3/h

Net weight 6.5 kg

Tank capacity 8 l.

Dimensions (LxAxH) 380x265x630

Price 120.00 €

1 - Control board

2 - Horizontal louver

3- Vertical louver

4 - Casters

5 - Switch

6 - Infrared receiver

7 - Cooling/Heating

8 - Handle

9 - Water level indicator

10 - Cable winder

11 - Cable

12 - Filter (optional)

13 - Water inlet

14 - Water tank

15 - Drain




nd


Model MUEV-3000 SUMO MUEV-5100 WINTER

Code HU 01 205 HU 01 206

Air flow rate m3/h 3000 5100

Cooling surface m2 60 75

Air scope m 12 17

Supply V-HZ-Ph 230-50-1

Absorbed power w 150 175

Speeds Number 3 3

Tank capacity litres 40 51

Mobility Wheels Wheels

Vertical baffle Automatic Automatic

Filtre YES YES

Water level light YES YES

Wide mm 618 630

Deep mm 505 445

High mm 960 1040

PRICE 345.00 € 375.00 €

MUEV-5100WINTER

MUEV-3000SUMO

FILL THE TANK WITHWATER OR ICE CUBES

HU EVAPORATIVE PORTABLE CONDITIONER

Series MUEV

• Multi-direction air outlet• Humidity control• Anti-mosquito net with a dust filtre.• Powerful motor, 3 speeds.• Ice deposit.• Large capacity tank.

HU OUTDOORSEVAPORATIVE UNIT

MFS5-65 “WATER NEBULISER”




nd

• Easy operation• Heat pump included• Adiabatic cooling system• Adjustable nebuliser level

(also suitable for indoor use)

This MUNDOCLIMA nebuliser provides the freshest comfort by hu-midifying the air, which feels as a decrease in temperature (2°C to6°C depending on the environmental conditions).

Its accurate water and air dispersion system prevents people andobjects from getting wet.


Model MFS5-65

Code HU 01 201

Flow m³/h 12600

Consumption W 230

Speed r.p.m 1400

Noise level dB(A) 55

Humidification L/h 7

Effective distance m 7

Effective area m² 30

Tank litres 32

Height mm 2020

Fan Ø mm 650

Price 500.00

REFRESHINGsolution for:TERRACESMARQUEES

CL WALL HEATERS

Economic SeriesMUR-ECO

Luxury SeriesMUR-LUXUS




nd

Perfect forsmall rooms:

• Bathrooms

• Kitchens

• Offices

• Etc.

• Temperature Control• Air swing function• Remote control infrared• Manual control• Tension 220V 50Hz• 2 power choices 1000W-2000W• Very silent operation• Overheat protection• Timer from 0.5 to 7.5 hours• Dimensions: 618x208x127 mm• Adjustable blades• Digital indication of the temperature in the front side

• Infrared remote control• Manual control key• Power supply 220V 50Hz• 2 heating modes of 1000 and 2000W• Tangential fan, very silent• Overheating protection• Operation light indicator• Timer from 0.5 to 7.5 hours• Dimensions: 453x182x113 mm• Fix blades

Code Model €

CE 04 201 Wall heater ECO series 50.00

CE 04 202 Wall heater LUXUS series 75.00

20 AIR PURIFIER

MU-PUR 300




nd

Model MU-PUR 300

Code KF 20 021

Power supply 220V-240V / 50Hz

Consumption 95 W

Dimensions (Wide x High x Deep) 396 x 576 x 245 mm

Weight 10,5 Kg

Speeds Mute-Baja-Alta-Turbo

Sound level (M-B-A-T) 28-38-48-53 dB(A)

Air flow rate (M-B-A-T) 75-150-230-300 m³/hRecommended air volume to betreated

45 m³

Price List (VAT not included) 300 €


FILTER LIGHT ON: indicates when the filter needs cleaning

REMOTE CONTROL VIA INFRARED.

A AUTOMATIC OPERATION: allows to select "automatically"the different levels to assure comfort.

SLEEPING MODE: reduces the speed bewteen the fan andincreases comfort during the night.

OPERATION TIME: automatic control of timer.

!DISPLAY OF THE OPERATING ALARMS: it displays thestate and shows when maintenance is needed.

DUST SENSOR.

SMELL SENSOR.

FILTRE HEPA 99% Efficiency

MEMORY: in case the electrical supply fails, the devicerestarts the last program in use.

NEW

2011• Deodorizes• Prevents allergies• Sanitizes• Revitaliza• Ioniza

INNOVATIVE TECHNOLOGY IN AIR PURIFIERS :

Cotton prefilter: Draws all particules of thick dust andmites. It is washable.

Filtre HEPA with filtering efficiency over 99%. Filters floa-ting particules bigger than 0,3 μm, mainly used in whiterooms (operating theatres, chemist's, laboratories, etc.).Draws virus and bacteria.

Filtre HIMOP (composed by pollycrystalline ceramicparticules ), technology developed to eliminate formal-dehydes. Its capatalyctic power makes dangerous parti-cles decompose and get absorbed (COV's).

Negative ion generator: the“air vitamins” or refreshingmode freed in the air makes the environment fresher andmore natural (the air surrondoing woods and waterfalls isequally rich in negative ions).

Filtre active coal: The great porosity of active coalallows to remove harmful gas and nasty smells out of theenvironment.

Plasma: Frees ionic groups and removes a large quan-tuty of bacteria from the air and cigarretes smoke.

VD AUTOMATIC HAND DRYER

Code Model Power(W)

Air speedm/s €

MU-SEC-M688

• Service voltage: 220V ~ 50HZ• Service temperature: 60º C ± 20º C• Operational range: >140 mm• Switch off time: <5 sec• Dimensions: 240 x 240 x 230• Material:Plastic ABS

VD 01 301 MU-SEC-M688 2.000 >16 90.00

MU-SEC-M588

• Service voltage: 220V ~ 50HZ• Service temperature: 60º C ± 20º C• Operational range: >140 mm• Switch off time: <5 sec• Dimensions: 240 x 240 x 230• Material: Plastic ABS

VD 01 302 MU-SEC-M588 1.500 >15 85.00

MU-SEC-298B

• Service voltage: 220V ~ 50HZ• Service temperature: 60º C ± 20º C• Operational range: >140 mm• Switch off time: <5 sec• Dimensions: 265 x 125 x 205• Material: metal

VD 01 303 MU-SEC-298B 1.500 >16 138.00

MU-SEC-M888

• Service voltage: 220V ~ 50HZ• Service temperature: 60º C ± 20º C• Weight: 3 Kg• Operational range: 140 mm• Delay: 5 sec• Dimensions: 250 x 140 x 325• Material: Plastic ABS

VD 01 304 MU-SEC-M888 1.500 >25 108.00

MU-SEC-462A

• Service voltage: 220 ~ 50HZ• Dimensions: 275 x 205 x 235• Material: Stainless steel

VD 01 306 MU-SEC-462A 2.300 >30 215.00




nd

NOTES:

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

SALVADOR ESCODA S.A.SALVADOR ESCODA S.A.®®

At Salvador Escoda more than 500 experts do our best in order to have everything you need ready for your installation. Since we startedour business, back in 1974, we have been constantly increasing our activity: broadening our range of products, gradually opening newpoints of sale, reaching distribution agreements with leader manufacturers, launching our own brand provided with a solid technicalsupport service and warranty and increasing our number of employees, all of them devoted to satisfy our clients’ needs. As a result wehave achieved a leading position in the Spanish distribution industry as well as started a successful export activity.

BARCELONA:

BADALONA:

L'HOSPITALET:

SANT BOI:

BARBERÀ:

TERRASSA:

MATARÓ:

VILANOVA I LA GELTRÚ:

ALBACETE:

ALICANTE 1:

ALICANTE 2 - Pedreguer:

ALMERÍA:

ASTURIAS:

BADAJOZ:

CÁDIZ 1 - Jerez:

CÁDIZ 2 - Algeciras:

CASTELLÓN:

CATALUNYA NORD - Figueres:

CIUDAD REAL:

CÓRDOBA:

GIRONA:

GRANADA:

HUELVA:

JAÉN:

LLEIDA:

LOGROÑO:

MADRID 1 - San Fernando:

MADRID 2 - Centro:

MADRID 3 - Fuenlabrada:

MADRID 4 - Rivas-Vaciamadrid:

MADRID 5 - Alcobendas:

MÁLAGA:

MURCIA 1 - San Ginés:

MURCIA 2 - Cartagena:

PALMA DE MALLORCA:

REUS:

SEVILLA 1:

SEVILLA 2 - Aljarafe:

SEVILLA 3 - Dos Hermanas:

TARRAGONA:

VALENCIA 1:

VALENCIA 2 - El Puig:

VALENCIA 3 - Paterna:

VALENCIA 4 - Gandía:

VALLADOLID:

ZARAGOZA:

Rosselló, 430-432 bjs.08025 BarcelonaTel. 93 446 20 25

Industria 608-61208918 BadalonaTel. 93 460 75 56

Av. Mare de Déu de Bellvitge,246-252 - 08907 L'Hospitalet Ll.Tel. 93 377 16 75

Pol. Prologis Park, nave 5C/. Filats, 7-11 - 08830 St. Boi Llob.Tel. 93 377 16 75

Marconi, 2308210 Barberà del VallèsTel. 93 718 68 26

Pol. Can Petit. Av. del Vallès,724B. 08227 TerrassaTel. 93 736 98 89

Carrasco i Formiguera, 29-35Pol. Ind. Plà d'en Boet. CP 08302Tel. 93 798 59 83

C/. Roser Dolcet, par. IP-01Pol. Sta. Magdalena. CP 08800Tel. 93 816 84 99

Pol. Campollano, D, p. 8-1002007 AlbaceteTel. 967 19 21 79Fax 967 19 22 46

Av. Neptuno, 503007 AlicanteTel. 96 511 23 42Fax 96 511 57 34

C/. Metal·lurgia, Pol. Les Galgues03750 PedreguerTel. 96 645 67 55Fax 96 645 70 14

Carrera Doctoral, 2204006 AlmeríaTel. 950 62 29 89Fax 950 62 30 09

Benjamin Franklin, 37133211 GijónTel. 985 30 70 86Fax 985 30 71 04

Pol. El Nevero, C/.14, n. 13.1206006 BadajozTel. 924 27 58 27Fax 924 28 62 36

Pol. El Portal, C/. Sudáfrica s/nºP. E. Mª Eugenia, 1. 11408 JerezTel. 956 35 37 85Fax 956 35 37 89

Av. Caetaria, par. 31811206 AlgecirasTel. 956 62 69 30Fax 956 62 69 41

Av. Enrique Gimeno, 24Pol. C. Transporte. CP 12006Tel. 96 147 90 75Fax 96 424 72 03

C/. Europa, 2. Pol. Vilatenim17600 FigueresTel. 972 67 19 25Fax 972 67 24 64

Pol. Ctra. de Carrión, nave 110CHnos Lumière. 13005 Ciudad RealTel. 926 22 13 13Fax 926 25 42 04

Juan Bautista Escudero, 219 CPol. Las Quemadas. CP 14014Tel. 957 32 27 30Fax 957 32 26 26

Pol. Ind. Pla d'AbastamentsC/. Falgàs, 11- 17005 GironaTel. 972 40 64 65Fax 972 40 64 70

Pol. Juncaril, C/. Lanjarón, 1018220 AlboloteTel. 958 49 10 50Fax 958 49 10 51

Pol. Industrial La Pazparcela 71-B. 21007 HuelvaTel. 959 27 01 02Fax 959 23 73 53

Pol. Olivares, Cazalilla, p. 5323009 JaénTel. 953 28 03 01Fax 953 28 03 46

Pol. Ind. Els Frares. Fase 3,par. 71 nave 5-6. 25190 LleidaTel. 973 75 06 90Fax 973 75 06 95

Pol. La Portalada II, pab. 4-5-6C/. Segador, 26. 26006 LogroñoTel. 941 58 69 08Fax 941 58 46 02

Av. de Castilla, 26 naves 10-1128830 S. Fernando de HenaresTel. 91 675 12 29Fax 91 675 12 82

Ronda de Segovia, 1128005 MadridTel. 91 469 14 52Fax 91 469 10 36

Fragua, 8 - Pol. Ind. Cantueña28944 FuenlabradaTel. 91 642 35 50Fax 91 642 35 55

C/. Electrodo, 8828522 Rivas-VaciamadridTel. 91 499 09 87Fax 91 499 09 44

Av. de Valdelaparra, 1328108 AlcobendasTel. 91 661 25 72Fax 91 490 43 11

C/. Brasilia, 16 - Pol. El Viso29006 MálagaTel. 952 04 04 08Fax 952 04 15 70

Pol. Oeste, Principal, p. 21/1030169 San GinésTel. 968 88 90 02Fax 968 88 90 41

Polígono Cabezo BeazaLuxemburgo I3. 30395 CartagenaTel. 968 08 63 12Fax 968 08 63 13

C/. Gremi de Boneters, 15Pol. Son Castelló - CP 07009Tel. 971 43 27 62Fax 971 43 65 35

Víctor Català, 4643206 Reus (Tarragona)Tel. 977 32 85 68Fax 977 32 85 61

Joaquín S. de la Maza, PICAp. 170, m. 6-7-8. CP 41007Tel. 95 499 99 15Fax 95 499 99 16

PIBO, Av. Valencina p. 124-12541110 Bollullos de la MitaciónTel. 95 577 69 33Fax 95 577 69 35

Pol. Ctra. Isla, Río Viejo, R-2041703 Dos HermanasTel. 95 499 97 49Fax 95 499 99 14

C/. del Ferro, 18-20Pol. Riu Clar. 43006 TarragonaTel. 977 20 64 57Fax 977 20 64 58

Río Eresma, s/n.º46026 ValenciaTel. 96 147 90 75Fax 96 395 62 74

P. I. nº 7, C/.Brosquil, n. III-IV46540 El PuigTel. 96 147 90 75Fax 96 147 31 56

P. E. Táctica, C/. Corretger,parcela 6. 46980 PaternaTel. 96 147 90 75Fax 96 147 90 52

Pol. Alcodar, C/. Brosquil, 646701 GandíaTel. 96 147 90 75Fax 96 296 23 32

Pol. S.Cristóbal, C/. Pirita, 4147012 ValladolidTel. 983 21 94 52Fax 983 21 92 32

Polígono Argualas, nave 5150012 ZaragozaTel. 976 35 67 00Fax 976 35 88 12

GIRONA

BARCELONA

REUS TARRAGONA

LLEIDA

ZARAGOZA

MADRID

L'Hospitalet

Badalona

Barberà

St.Boi

CASTELLÓN

VALENCIA

MURCIAALBACETE

GIJÓN

MÁLAGA

GRANADA

JAÉNCÓRDOBA

PALMA DEMALLORCA

MataróTerrassa

SEVILLA

JEREZ

ALGECIRAS

GANDÍA

PEDREGUERALICANTE

CARTAGENA

ALMERÍA

HUELVA

Vilanova i la Geltrú

Figueres

BADAJOZ

LOGROÑO

CIUDAD REAL

VALLADOLID

SALVADOR ESCODA S.A.®

Head Office:Provenza, 392 1 and 2 floor. 08025 BarcelonaPhone +34 93 4462780. Fax +34 934569032

st nd

CO

MM

ER

CIA

L N

ETW

OR

K IN

BA

RC

ELO

NA

Export DepartmentProvenza, 392 2 floor

08025 BarcelonaPhone +34 93 446 27 81

Fax +34 93 446 27 [email protected]

nd

Heating Refrigeration Insulation

your integral supplier for

Ventilation

SplitMountingAccessories PriceList SalvadorEscoda

Documents

Transcript of SplitMountingAccessories PriceList SalvadorEscoda