Splicing The Fiber Optic Marketplace, LLC Rental … · Tension Test 1.96N ... S325A One-Action...

For ordering assistance, please contact Customer Service at 877-529-9114 ([email protected]) or visit our website at: www.fiberoptic.com

Fitel Fusion splicers

S122 SERIESHand-Held Fusion Splicer

With its super low profile and new user friendly interface, the Fitel S122 series fusion splicer offers next generation workability for every splicing field, FTTX, LAN, backbone, or long-haul installations. Combining the portability, power flexibility and field ruggedness of FITEL’s previous generation of hand-held splicers with the proven quality and performance of our ribbon splicers, the S122 delivers fast and consistent splicing with outstanding mobility and extreme ease-of-use.

SPECIFICATIONSiteM speciFicAtionFiber Types SMF, MMF, DSF, NZDSFCladding Diameter 125µmCoating Diameter 250µm-900µm for single fiber, 280µm-400µm for ribbon (thickness) (S122M4 only)Average Splice Loss SMF: 0.05dB, MMF: 0.03dB DSF: 0.08dB, NZDSF: 0.08dBSplice Time 13 sec. (S122A), 15 sec. (S122M4)Heat Time Single Fiber: 37 sec. (40mm), 51 sec. (60mm)Ribbon Fiber: 45 sec. (40mm)Tension Test 1.96NSleeve Length 40/60mmProgram Memory Splice Programs: Max. 150 / Heat Programs: Max. 12Splice Memory Max. 1,500Fiber Image Display Simultaneous two-axis displayMagnification 120X (S122A), 48X (S122M4)Dimensions 140W x 189L x 73H mmWeight 800g/1.8lb. (body), 170g/0.4lb. (battery)AC Input 100 to 240VACDC Input S943 Li-Ion battery (11.1V, 2300mAh)Battery Capacity 90 splices or 50 splices with heat shrink protectionOperating Temp. -10ºC to +50ºCStorage Temp. -40ºC to +60ºC

S122-A-A-0001 S122A Splice Body • • •S122-M-A-0001 S122M4 Splice Body • • •S122-X-A-0002 Soft Carrying Case • • • •S122-X-A-0003 Strap • • • • • •S122-X-A-0005 Hard Carrying Case • •S211B Fiber Stripper • • • •S218R Thermal Fiber Stripper • •S325A One-Action Precision Cleaver • • • •S709A-004 4-Ribbon Fiber Holders (pair) • • •S709S-250 250µm Fiber Holders (pair) • • • • • •S709S-900 900µm Fiber Holders (pair) •S943 Li-Ion Battery • • • • • • S943 Extra Li-Ion Battery • •S957 AC Adapter • • • • • •S958B Battery Recharger • • • • • •S959 DC Adapter • •S966 Electrodes (pair) • • • • • •D5111 Electrode Cleaning Disk • • • • • •FPF-01 Fiber Preparation Fluid • • • •FW-01 Fiber Wipes • • • •FTS-B291 Manual • • • • • •

s122As122A-Kit-1

s122A-Kit2

s122AM4

s122AM4-Kit-1

s122AM4-Kit-2pArt # Description

SplicingEquipmentRental Equipment

MASS FIBER SPLICER pg. 14The FSM-50R is a ribbon splice capable of 4, 8 ad 12 count fiber splicing and offers numer-ous improvements over previous mass splicers to increase productivity and provide additional flexibility on the job.

Kit Includes:• Fujikura FSM-50R Fusion Splicer• CT-30 Fujikura High Precision Cleaver• ADC-11 AC Adapter/Battery Charger• Battery Pack BTR-06• Power Cord• 2x 50R Electrodes• Hard Carrying Case

WeeKs price1 $1,225.002 $1,485.004 $1,925.00

FTB-150 OTDR pg. 18The FTB-150 OTDR takes EXFO’s world-re-nowned OTDR technology to the next level of user-friendliness.

Kit Includes: • FTB-150 Quad OTDR• Certificate of Compliance• Carrying Case• Fiber Adapter• Power Cord

WeeKs priceQuad 1 $1,075.00 2 $1,350.00 4 $1,795.00Dual 1 $825.00 2 $1,025.00 4 $1,375.00

y

The Fiber Optic Marketplace, LLC TM

[email protected]

OPTIONAL ACESSORIESpArt # Description priceS122A $6,400.00 S122A-KIT-1 $7,660.00S122A-KIT-2 $8,810.00S122AM4 $6,400.00S122AM4-KIT-1 $12,485.00S122AM4-KIT-2 $13,135.00


The Fiber Optic Marketplace, LLC TMSplicingEquipment

S177A Hand-HeldCore-Alignment Fusion Splicer

SPECIFICATIONSpArAMeter VAlueModel S177A Hand-Held Core-Alignment Fusion SplicerSplicing Method Core-AlignmentFiber Type(1) SMF, MMF, DSF, NZDSF, EDF, TW, LF, HI1060, and many moreCladding Diameter 80 - 220µmCoating Diameter 100 - 1000µmAverage Loss (2) SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dBSplice Time 9 sec.Heat Time 37-second (40mm), 51-second (60mm)Applicable Sleeves 20 - 60mmCleave Length 150 - 200µm: 5mm, 250µm: 5 ~ 16mm, 400 / 900µm: 10, 16mmMagnification Up to 608XDimensions 130W x 260D x 137H (mm)Weight 2.20kg (4.85lbs.) [weight including battery]Power AC Input: 85 to 264VAC (50/60Hz), DC Input: 11 to 17VDCBattery Internal Li-ion Battery - 70 splice cycles, External (option) - 350 cyclesSplice Memory 2000 splicesOperating Temp. 0 - 4,000m, -10 to +50 C and 90% at 38 C

STANDARD PACKAGE pArt # Description priceS177A S177-A-A-0001 Splicer Body $15,900.00 S177-X-S-0002 Spare Electrodes S177-X-A-0003 Carrying Case S177-X-S-0004 Manual S943 Internal Battery S957 AC Adapter D5111 Electrode Cleaning Disk

• Visual Guidance for Maintenance

• S707 Fiber Holders

• New GUI & LCD Screen


SPLICER KITS pArt # Description priceS177A-01-KIT S177A Splicer Body $17,140.00 S177-X-S-0002 Spare Electrodes S177-X-A-0003 Carrying Case S211B Stripper S177-X-S-0004 Manual S943 Internal Battery S957 AC Adapter S325A Precision Cleaver D5111 Electrode Cleaning DiskS177A-02-KIT S177-X-A-0001 Splicer Body $18,340.00 S177-X-S-0002 Spare Electrodes S177-X-A-0003 Carrying Case S177-X-S-0004 Manual S177-X-S-0007 Fiber Holder Mounts S211B Miller Stripper S325A Precision Cleaver S707-250 250µm Fiber Holders S707-900 900µm Fiber Holders S943 Internal Battery S957 AC Adapter

OPTIONAL ACESSORIESpArt # Description priceS177-X-A-0012 Work Table $450.00S177-X-S-0002 Electrodes $125.00S177-X-S-0007 Fiber Holder Mount $600.00S210 Furukawa Fiber Stripper $115.00S325A Hand-Held High Precision Cleaver $1,200.00S707-080 80µm Fiber Holder $600.00S707-250 250µm Fiber Holder $600.00S707-900 900µm Fiber Holder $600.00S945 Large Capacity External Battery $425.00

The new hand-held FITEL S177A incorporates an improved heat-ing design that cuts splice-to-heat time by 40 percent, achieving a 9-second splice time and 37-second heat time. The unit’s T-shaped body design is also 40 percent lighter, weighing only 4.85 pounds including battery. Ideal for fast field use, the S177A reduces the fiber length required for splicing by 30 percent. In addition, fiber magnification power is 608X, marking the industry’s most powerful rating for a core alignment splicer.



S183PMAdvanced Fusion SplicerThe S183 Advanced Fusion Splicer series was designed specifically for the demand-ing production and research applications of the optical components industry. There are two versions of the S183: the S183K offers programs for specialty and exotic fiber combinations as well as high-strength splicing applications. The S183PM has all the capability of the S183K, but can also splice polarization maintaining fiber faster than any other unit in the world. The S183 Advanced Fusion Splicer series is setting a new standard in the field for high-end fusion splicing applications.

STANDARD PACKAGE (AS INDICATED BELOW) PRICES183-P-A-0001 S183PM Main Body $49,995.00 S710S-080 Pair 160µm Holders S710S-250 Pair 250µm Holders S710S-400 Pair 400µm Holders S710S-900 Pair 900µm Holders) S183-X-A-0002 Fiber Transporter S183-X-S-0003 AC Adaptor S183-X-S-0004 AC Power Cord S183-X-S-0005 Pair Spare Electrodes Electrode Sharpener User’s Manual

OPTIONAL ACCESSORIESpArt # Description priceS183-X-A-0008 Remote Control Box $1,830.00S183-X-A-0009 Ultrasonic Cleaner $825.00S219L/D Thermal Stripper L = $2,000.00 D = $2,500.00S325 High Precision Cleaver $1,200.00S533A Curl Remover $1,200.00S541A Fiber Recoater $15,000.00

Splice Time 20 seconds for identical Single-Mode fibers 42 seconds for identical PM fibers (cladding clamping) 60 seconds for identical PM fibers (coating clamping)Heating Time 90 seconds for 60mm sleeves 95 seconds for 40mm sleeves 40 seconds for 25mm sleevesReturn Loss >60dBTensile Strength Typical 300kpsi (25N) with coating clampingMagnification 133X & 266XMonitor 5” 8-color LCD monitor.Video Output PINData Interface Serial, USB ver. 2.0, and EthernetSplice Programs 55 Default/150 AvailableSplice Memory Maximum 2000 splicesOperating Temperature 0 to +40° C (without excessive humidity)Storage Temperature -40 to +60° C (without excessive humidity)Power Source AC 100 to 240V (50-60Hz) with AC adaptorLoss Estimation Cleave angle, Fiber Offset, Tilt, Micro-bending,Parameters Fiber end gap, Bubbling at splice point


SplicingEquipment

SPECIFICATIONS Applicable Fibers SMF, MMF, DSF, NZDSF, CSF, DCF, EDF, PMFFiber Cleave Length 3 to 5mm with coating clamping 9 to 11mm with bare fiber clampingCladding Diameter 80 to 200µmCoating Diameter 160 to 900µmTypical Insertion Loss 0.02dB for identical Single – Mode Fibers(Similar Fiber Splicing) 0.01dB for identical Multi – Mode Fibers 0.04dB for identical Dispersion Shifted Fibers 0.05dB for identical PM fibers (S183PM type)Typical Insertion Loss 0.05dB for Single – Mode Fiber to PANDA fiber(Dissimilar Fiber Splicing) 0.10dB for Single – Mode Fiber to TIGER fiber 0.15dB for Single – Mode Fiber to BOW-TIE fiber 0.10dB for PANDA Fiber to TIGER fiber (S183PM type)Typical Extinction Ratio -40dB (0.6 degree) for identical PANDA fibers(Cross Talk) -32dB (1.4 degree) for identical TIGER fibers(Similar Fiber Splicing) -32dB (1.4 degree) for identical BOW-TIE fibersTypical Extinction Ratio -32dB (1.4 degree) for PANDA Fiber to TIGER fiber(Cross Talk) -30dB (1.8 degree) for PANDA Fiber to BOW-TIE fiberDimensions / Weight 350W x 197D x 154H(mm) / 8.7 (kg)



S199 SeriesMass Fusion Splicer

Used for ribbon-type fiber splicing in Outside Plant and Long-Haul applications.

SPECIFICATIONS S199M12 S199M24 SMF Single Fiber (250µm, 900µm) Single Fiber (250µm, 900µm) Ribbon Fiber (2F, 4F, 6F, 8F, 10F, 12F) Ribbon Fiber (2F, 4F, 6F, 8F, 10F, 12F, 16F, 24F) MMF Single Fiber (250µm, 900µm) Single Fiber (250µm, 900µm)Fiber Type Ribbon Fiber (2F, 4F, 8F, 12F) Ribbon Fiber (2F, 4F, 8F, 12F,) DSF Single Fiber (250µm, 900µm) Single Fiber (250µm, 900µm) Ribbon Fiber (2F, 4F, 8F, 12F) Ribbon Fiber (2F, 4F, 8F) NZDSF Single Fiber (250µm, 900µm) Single Fiber (250µm, 900µm) Ribbon Fiber (4F, 6F, 8F, 10F, 12F) Ribbon Fiber (4F, 6F, 8F, 10F, 12F, 16F, 24F)Cladding Diameter 125µm Coating Diameter Single Fiber: 250µm, 900µm Ribbon Fiber: 280µm, 400µmAverage Splice Loss SMF: 0.03dB, MMF 0.03dB, DSF: 0.07, NZDSF: 0.05 - 0.09dB (brand dependent)Average Splice Time 30 sec. splicing (3), 90 sec. heating (4)Cleave Length 10mmData Memory 250 splices Applicable Protection Sleeve 40mm/60mm Dimensions 150W x 150D x 150H (mm) / 6”W x 6”D x 6”H Weight S199M12: 2.7kg / 7.3lbs, S199M24: 3.4kg / 7.5lbs. AC/DC Input DC: 12V (S940 Battery) AC: 85~264V (50/60Hz)Battery Life 30 splices with heat shrink protection / 2 hoursOperating Temperature -10ºC to +50ºCStorage Temperature -40ºC to +60ºC

FEATURES • small & portable Small compact size with insertable battery. All models use same body case.• large Monitor 5-inch low reflection LCD is used. Can be clearly seen even under strong sunlight.• Quick splice time Fibers are simultaneously inspected by two CCD cameras. As a result, the entire splicing process is very fast. Average splice time is 30 seconds.• embedded self Diagnosis Function Before carrying out real splicing, the embedded diagnosis function can help the user check the status of the machine.• Fiber position Adjustment Button Fiber position adjustment button can help the user fine tune the fiber position in the v-groove.

= Standard Body & Parts

= Basic Accessories

= Extended Accessories

STANDARD PACKAGE S199M12-P1 Splicer Body $23,160.00 S940 Battery Pack S950 AC/DC Converter S199X-12 Cooling Tray S325 Hand-Held Precision Cleaver S218R Thermal Stripper S706A-012 12 Fiber Ribbon Holder S199X-17 Hard Carrying Case English User ManualS199M24-P1 Splicer Body $38,175.00 S940 Battery Pack S970 AC/DC Converter S199X-12 Cooling Tray S323M Precision Cleaver to 24f Ribbon S219V Thermal Stripper to 24f Ribbon S927C 24 Fiber Ribbon Proctection Sleeves (25 pcs) S706A-024 Fiber Holders to 24f Ribbon Hard Carring Case English User Manual


SplicingEquipment



FujiKurA Fusion splicers

FUJIKURA FSM-11R & FSM-11S FUSION SPLICERS SpliceMate™ (FSM-11) is the world’s smallest and most portable fusion splicer and is designed to meet the challenges posed by today’s fiber networks. SpliceMate fits in the palm of your hand, yet it’s smart and reliable enough to be used with confidence by inexperienced operators. SpliceMate’s advanced intelligence features include two-camera fiber inspection to insure the splice is right and Auto Arc Calibration...an industry first. It’s easy to operate and quickly makes low loss splices with all common types of optical fibers up to 4-fiber ribbons. SpliceMate is available with a variety of powering options including a battery pack and adapters to work with AC or DC power sources. A workstation, specifically designed for the SpliceMate, is available for simplified splicing in the field. Whether splicing on a pole, in a bucket, or in a neighborhood...SpliceMate is the friend to have along on the job!

Features• Highly Portable• Dual Camera Inspection• 3.5” Dual Direction Monitor• Single or 4-Fiber Versions Available• 40 Second Tube Heater• Auto Arc Calibration• 30 MPH Wind Protection

SPECIFICATIONSpArAMeter VAlueModel FSM-11R Fusion Splicer FSM-11S Fusion Splicer Applicable Fibers SMF, MMF, NZDS, DSFNumber of Fibers Single fiber (FSM-11S) / up to 4-fiber ribbon (FSM-11R)Cladding Diameter 125µmCoating Diameter 250µm and 900µmTypical Average Splice Loss SMF = 0.05dB / MMF = 0.02dBSplicing Time FSM-11R (20 seconds) / FSM-11S (11 seconds)Arc Calibration Method Automatic and manual methodsSplicing Modes (40) Auto SM / NZ / DS Auto MM SM, MM, NZDS, DSFSplice Loss Estimate Based on dual camera inspectionMonitor 3.5”, adjustable monitor angle (front or top selectable)Tube Heating Time 40 secondsNumber of Splice / Heat with Battery 30Power Supply AC, DC, BatteryTerminals USBWind Protection 30 mphDimensions 110mm x 80mm x 100mmWeight with Battery 0.80kg

ACCESSORIES AND SUPPLIES pArt # Description pricecleAVersS014076 CT-30 Cleaver $1,056.72S014092 FC-02 Fiber Collector $194.81S014104 FDB-02 Fiber Collector Box $11.43BAtteries AnD poWer corDsS014000 BTC-04 Battery Charger $370.00S014004 BTR-07 Battery $388.50S014008 DCA-02 DC Adaptor $233.10S012548 ADC-10 AC Adapter $271.43MiscellAneousS013800 FH-50-250 Fiber Holders (250 micron-single fiber) $330.23S013804 FH-50-900 Fiber Holders (900 micron-single fiber) $330.23

pArt # Description priceMiscellAneous S013812 FH-50-4 Fiber Holders FSM-11R (only) $330.23S013808 FH-50-2 Fiber Holders FSM-11R (only) $330.23S013996 HJS-03 Battery Powered Hot Jacket Stripper $1,456.00 (includes DCC-11 cord) FSM-11R (only)S014024 LC-01 Leather Case for SpliceMate 11R/11S $97.13S014028 Electrodes: FSM-11S/R 11R/11S $100.00S002111 FAT-02 Fiber Arrangement Tool FSM-11R (only) $850.00S010212 FAT-04 Fiber Arrangement Tool FSM-11R (only) $470.00S008720 FAA-03 Ribbon Forming Adhesive (4 oz. bottle) $45.00S008622 FAA-03 Ribbon Forming Adhesive (0.5L bottle) $135.00

ORDERING INFORMATION pArt # Description priceS013956 FSM-11S Fusion Splicer (Single Fiber Version - Splicer only), FH-50-250 Fiber Holders, BTC-04 Battery Charger, BTR-07 Battery, $7,500.00 Spare Electrodes (Pair), Operation Manual, Transit CaseS013988 FSM-11S Fusion Splicer (Single Fiber Version - Kit), FH-50-250 Fiber Holders, BTC-04 Battery Charger, BTR-07 Battery, $8,400.00 Spare Electrodes (Pair),Operation Manual, Transit Case, CT-30 Cleaver S013960 FSM-11R Fusion Splicer (4-Fiber Ribbon Version - Splicer only), FH-50-4 Fiber Holders, BTC-04 Battery Charger, BTR-07 Battery, $8,900.00 Spare Electrodes (Pair), Operation Manual, Transit CaseS013992 FSM-11R Fusion Splicer (4-Fiber Ribbon Version - Kit), FH-50-4 Fiber Holders, BTC-04 Battery Charger, BTR-07 Battery, Spare $11,400.00 Electrodes (Pair), Manual, Transit Case, CT-30 Cleaver, FC-01 Fiber Collector, HJS-03 Battery Powered Hot Jacket Stripper



FUJIKURA FSM-17S FUSION SPLICER The FSM-17S establishes a new standard for single fiber “fixed v-groove” type fusion splicers with a host of improvements including a 35 second tube heater, dual position monitor, and a longer battery life. The real time arc calibration feature makes field maintanence easier than ever. Also available now is a version of the FSM-17S utilizing a fiber holder system, making the splicing process extremely simple for inexperienced technicians. The FSM-17S is well suited for FTTX applications and both models quickly attach to the newly redesigned ASW-02 workstation making field portability a breeze.

Features• Highly Portable• Dual Camera Inspection• 3.5” Dual Direction Monitor• Single or 4-Fiber Versions Available• 40 Second Tube Heater• Auto Arc Calibration• 30 MPH Wind Protection

SplicingEquipment


SPECIFICATIONSpArAMeter VAlueModel FSM-17S: Fiber Sheath Clamp Model / FSM-17S-FH: Fiber Holder ModelApplicable Fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)Cladding Diameter 125µmCoating Diameter FSM-17S: 250µm to 1000µm / FSM-17S-FH: 250µm using the FH-50-250 fiber holder or 900µm using the FH-50-900 fiber holderFiber Cleave Length FSM-17S: 8 to 16mm with 250µm coating. 16mm with 900µm coating. Typical Average Splice Loss 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.Splicing Time Typically 11seconds with standard SM fiberArc Calibration Method Automatic. Manual arc calibration function available.Splicing Modes 40 user programmable modes and up to 60 modes for referenceSplice Loss Estimate Based upon dual camera cladding alignment data.Storage of Splice Result The last 2000 results to be stored in the internal memory.Fiber Display X / Y, or both X and Y simultaneously. Front or rear monitor display options.Magnification 316x for single X or Y view, or 158x for X and Y view.Viewing Method Dual cameras with 5.6 inch color LCD monitor.Operating Condition 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively.Mechanical Proof Test 2NTube Heater Built-in tube heater with 10 heating modes ,up to 20 modes for reference.Tube Heating Time Typically 35 seconds with FP-03 protection sleeve.Protection Sleeve Length 60mm, 40mm, micro# of Splice/heat w/Battery Typically 80 cycles with BTR-06(S) / Typical 160 cycles with BTR-06(L).Power Supply Auto voltage selection from 100 to 240V AC or 10-15V DC w/ADC-11. 13.2V DCTerminals USB 1.1 (USB-B type) for PC communication. RCA video jack / NTSC.Wind Protection Max. wind velocity of 15m/s. (34 mph)Dimensions 150W x 150D x 150H (mm) / 5.9W x 5.9D x 5.9H (inches)Weight 2.6 kg (5.7 lbs.) including AC adapter ADC-11

ACCESSORIES AND SUPPLIESpArt # Description priceCLEAVERS S014076 CT-30 Cleaver $1,056.72S014080 CT-30A Cleaver $1,113.33FIBER HOLDERS (PAIRS)S013800 FH-50-250 (250µm coated single fiber) $330.23S013804 FH-50-900 (900µm jacketed single fiber) $330.23BATTERIES AND POWER CORDSS013516 ADC-11 AC Adapter/Battery Charger $563.33S013520 BTR-06S Battery (80 splice/heating cycles) $303.40S013528 BTR-06L Battery (160 splice/heating cycles) $530.95S013524 DCC-10 Power Cord (ADC-11 to BTR-06S / BTR-06L) $75.11

pArt # Description priceBATTERIES AND POWER CORDS S013552 DCC-12 Power Cord (ADC-11 to cigarette lighter socket) $131.44S013556 DCC-13 Power Cord (ADC-11 using alligator clips) $131.44MISCELLANEOUSS013532 ELCT2-20A Electrodes (17S) $100.00S010532 ASW-02 Aerial Workstation $832.50S013536 WT-6 Work Table (requires WTS-06 Work Table Support) $171.33S013544 WTS-06 Work Table Support $37.00

ORDERING INFORMATION pArt # Description priceS013612 FSM-17S (machine only), Includes: ADC-11 AC adapter/battery charger, AC cord, spare electrodes, manual, transit case. $6,250.00S013616 FSM-17S Kit includes, CT-30A Cleaver, ADC-11 AC adapter/battery charger, AC cord, spare electrodes, manual, transit case. $7,150.00S013880 FSM-17S Kit includes, CT-30 Cleaver, ADC-11 Adapter / Battery charger, AC cord, spare electrodes, manual and transit case. $7,525.00S013836 FSM-17S-FH Kit, includes a CT-30 Cleaver, FH-50-250 Fiber Holder (1 pair), FH-50-900 Fiber Holder (1 pair), ADC-11 $7,650.00 AC adapter/battery charger, AC cord, spare electrodes, manual, transit case.



FujiKurA Fusion splicersFUJIKURA FSM-17R FUSION SPLICER The FSM-17R establishes a new standard for up to 4-fiber “fixed v-groove” ribbon splicing. The unit in-cludes a host of valuable features including fast performance, dual position monitor, and extremely long battery life. The real-time arc calibration feature makes field maintenance easier than ever. The FSM-17R is well-suited for FTTx applications, and quickly attaches to the ASW-02 workstation, making field portability a breeze in the most challenging of aerial or terrestrial splicing environments.

Features• 40 second tube heater• Dual direction monitor position• Long life battery (up to 140 splices/shrinks per charge)• Automatic arc calibration

SPECIFICATIONS pArAMeter VAlueModel FSM-17R: Four Fiber Ribbon Fusion SplicerApplicable Fibers SM, MM, DS and NZDS.Fiber Count 1, 2, 4Cladding Diameter 125µmFiber Cleave Length 10mmAverage Splice Loss 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS Measured by cut-back method relevant to ITU-T and IEC standards.Splicing Time Typical 20 seconds with 4-fiber ribbonArc Calibration Method Automatic. Manual arc calibration function available.Splicing Modes 40 user programmable modes and 60 modes for reference.Splice Loss Estimate Based upon dual camera cladding alignment data.Splice Memory 600 splices.Fiber Display X / Y, or both X and Y simultaneously. Front or rear monitor display.Magnification 89x for X or Y view.Viewing Method Dual cameras with 5.6 inch color LCD monitor.Operating Condition 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively.Mechanical Proof Test 2NTube Heater Built-in tube heater w/10 heating modes & 20 modes for reference.Tube Heating Time Typical 40 seconds with FP-04(T) protection sleeve.Protection Sleeve Length 60mm, 40mm and micro# of Splice/Shrink per Charge Typical 70 cycles with BTR-06(S) / Typical 140 cycles with BTR-06(L).Power Supply Auto voltage selection.Terminals USB 1.1 (USB-B type) for PC communication.Video terminal RCA video jack / NTSC.Wind Protection Max. wind velocity of 15m/s. (34 mph)Dimensions 150W x 150D x 150H (mm) / 5.9W x 5.9D x 5.9H (inches)Weight 2.7 kg (5.9 lbs.) including AC adapter ADC-11

ACCESSORIES AND SUPPLIESpArt # Description priceCLEAVERSS014076 CT-30 Cleaver $1,056.72FIBER HOLDERS (PAIRS)S013800 FH-50-250 (250µm coated single fiber) $330.23S013804 FH-50-900 (900µm jacketed single fiber) $330.23BATTERIES AND POWER CORDSS013516 ADC-11 AC Adapter/Battery Charger $563.33S013520 BTR-06S Battery (80 splice/heating cycles) $303.40S013528 BTR-06L Battery (160 splice/heating cycles) $530.95S013524 DCC-10 Power Cord $75.11S013552 DCC-12 Power Cord (to cigarette lighter socket) $131.44S013556 DCC-13 Power Cord (to power source via alligator clips) $131.44

pArt # Description priceMISCELLANEOUSS002111 FAT-02 Fiber Arrangement Tool $850.00S010212 FAT-04 Fiber Arrangement Tool $466.20S008720 FAA-03 Ribbon Forming Adhesive (4 oz. bottle) $41.55 S008622 FAA-03 Ribbon Forming Adhesive (0.5 liter bottle) $132.22S013532 ELCT2-20A Electrodes (17R) $100.00S010532 ASW-02 Splicing Workstation $832.50S013536 WT-6 Work Table $171.33S013544 WTS-06 Work Table Support $37.00

ORDERING INFORMATION pArt # Description priceS013916 FSM-17R (machine only), includes: ADC-11 AC adapter/battery charger, AC cord, spare electrodes, manual, transit case, FH-50-4 fiber holders, magnifier. $8,150.00S013976 FSM-17R Kit, includes: CT-30 Cleaver, HJS-02 Hot Jacket Stripper, ADC-11 AC adapter/battery charger, AC cord, carrying strap, $10,150.00 spare electrodes (pair), instruction manual, transit case, FH-50-4 fiber holders (pair), magnifier. S013980 FSM-17R Fusion Splicer Kit with Battery and Charge Cord, includes: BTR-06(S) battery, DCC-10 battery cord, & CT-30 Cleaver, HJS-02 Hot Jacket $10,525.00 Stripper, ADC-11 AC adapter/battery charger, AC cord, spare electrodes, instruction manual, transit case, FH-50-4 fiber holders, magnifier.



FUJIKURA FSM-50S FUSION SPLICER The FSM-50S Fusion Splicer sets the standard for core alignment fusion splicers. The FSM-50S is the fast-est field splicer available, and completes a splice and tube heat in a total of 44 seconds. Special features include its small size and weight - the smallest in the industry - and the legendary ruggedness Fujikura is known for. The FSM-50S also includes user-friendly features such as calibration-free arc adjustments, automatic fiber type identification and reduced operational steps. The FSM-50S also offers increased flexibility for various splicing tasks with user-selectable front and back monitor positioning.

Features• Automatic core to core, low-loss splicing regardless of fiber quality or age• 9-second splicing time• 35-second heat time (60mm sleeve)• Dual, user selectable monitor position• Excellent visibility in bright sunlight with 5.6” TFT Color LCD display• Automatic arc calibration• Long life battery (up to 160 splice/shrink cycles per charge)

SplicingEquipment


SPECIFICATIONSpArAMeter VAlueModel FSM-50S Fusion SplicerApplicable Fibers SM, MM, DS and NZDSCladding Diameter 80µm-150µmCoating Diameter 100µm to 1000µmFiber Cleave Length 8mm to 16mm with 250µm coating diameter. 16mm with 900µm coating diameter.Typical Average Splice Loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.Splicing Time Typically 9 seconds with standard SM fiberArc Calibration Method Automatic, using results of previous splice when in AUTO mode. Manual arc calibration function available. Splicing Modes 40 user programmable modes and up to 60 modes for reference.Splice Loss Estimate Based upon dual camera core alignment data.Storage of Splice Result The last 2000 results to be stored in the internal memory.Fiber Display X / Y, or both X and Y simultaneously. Front or rear monitor display.Magnification 295x for single X or Y view, or 147x for X and Y view.Viewing Method Dual cameras with 5.6 inch color LCD monitor.Operating Condition 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively.Mechanical Proof Test 2NTube Heater Built-in tube heater with 30 heating modes.Tube Heating Time Typically 35 seconds with FP-03 protection sleeve.Protection Sleeve Length 60mm, 40mm# of Splice/Heat With Battery Typically 80 cycles with BTR-06(S) / Typical 160 cycles with BTR-06(L).Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC.Terminals USB 1.1 (USB-B type) for PC communication. Video terminal RCA video jack / NTSC. Wind Protection Max. wind velocity of 15m/s. (34 mph)Dimensions 150W x 150D x 150H (mm) / 5.9W x 5.9D x 5.9H (inches)Weight 2.8 kg (6.4 lbs.) including AC adapter ADC-11

ORDERING INFORMATION pArt # Description priceS013510 FSM-50S Fusion Splicer (Machine Only). Each Fusion Splicer comes with ADC-11 AC adapter/battery charger, AC cord, spare electrodes $19,000.00 (pair), monitor cover, operation manual, and transit case.S013512 FSM-50S Fusion Splicer Kit (includes cleaver). Kit includes: Fusion Splicer with ADC-11 AC adapter/battery charger, CT-30A Cleaver, $19,900.00 AC cord, spare electrodes (pair), monitor cover, operation manual, and transit case.

ACCESSORIES AND SUPPLIES pArt # Description priceCLEAVERSS014080 CT-30A Cleaver $1,113.33BATTERIES AND POWER CORDSS013516 ADC-11 AC Adapter/Battery Charger $563.33S013520 BTR-06S Battery (80 splice/heating cycles) $303.40S013528 BTR-06L Battery (160 splice/heating cycles) $530.95S013524 DCC-10 Power Cord (BTR-06S or BTR-06L) $75.11S013552 DCC-12 Power Cord $131.44 (connects ADC-11 to cigarette lighter socket) S013556 DCC-13 Power Cord $131.44 (connects ADC-11 to power source via alligator clips)

pArt # Description priceMISCELLANEOUSS013532 ELCT2-20A Electrodes $100.00S010532 ASW-02 Splicing Workstation $832.50S013536 WT-6 Work Table (requires WTS-06 Table Support) $171.33S013544 WTS-06 Work Table Support $37.00S013628 JP-04 Splice Sleeve Cooling Tray $113.78S013564 50S Set Plate “B” (allows 10mm cleave of 900µm) $250.00 (includes installation)S013540 Transit Case (50S) $565.66S012996 One year extended warranty $1,900.00S013000 Two year extended warranty $2,850.00



FujiKurA Fusion splicersFUJIKURA FSM-50R12 Fusion Splicer The FSM-50R12 offers numerous improvements to increase productivity and provide additional flexibility. A new “auto load” feature provides for fast and easy placement of the fiber holders into the splicer. The FSM-50R12 also benefits from a greatly improved tube heater which shrinks a 12 fiber splice protection sleeve in approximately 45 seconds. Other enhancements include larger capacity batteries, dual direction monitor, and real time arc calibration. The FSM-50R12 quickly attaches to our newly redesigned ASW-02 workstation, making field portability a breeze.

Features• 45 second tube heater• Dual direction monitor position• Long life batteries (up to 140 splices/shrinks per charge)• Automatic arc calibration

SPECIFICATIONSpArAMeter VAlueModel FSM-50R12: Mass fusion splicer up to 12-fiberApplicable Fibers SM, MM, DS and NZDSFiber Count 1, 2, 4, 5, 6, 8, 10 and 12Fiber Cleave Length 10mmAverage Splice Loss 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, and 0.08dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.Splicing Time Typically 20 secondsArc Calibration Method Automatic. Manual arc calibration function available.Splicing Modes 40 user programmable modes and up to 60 modes for reference.Storage Of Splice Result FSM-50R12: The last 400 results to be stored in the internal memory. Fiber Display X / Y, or both X and Y simultaneously. Front or rear monitor display options.Magnification FSM-50R12: 35xViewing Method Dual cameras with 5.6 inch color LCD monitor. Operating Conditions 0 to 3,660m above sea level, 0 to 95%RH and -10 to 50°C respectively.Mechanical Proof Test 2NTube Heater Built-in heater with 10 heating modes and up to 20 modes for reference.Tube Heating Time Typically 45 seconds with FP-05 protection sleeves. Protection Sleeve Length 60mm and 40mm# of Splice/Shrink per Charge Typically 70 cycles with BTR-06(S) / Typical 140 cycles with BTR-06(L).Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC.Terminals USB 1.1 (USB-B type) for PC communication. Video terminal RCA video jack.Wind Protection Max. wind velocity of 15m/s. (34 mph)Dimensions 150W x 150D x 150H (mm) / 5.9W x 5.9D x 5.9H (inches)Weight 2.6 kg (5.7 lbs.) including AC adapter ADC-11

ORDERING INFORMATIONpArt # Description priceS013840 FSM-50R12 Mass Fusion Splicer, includes: FH-50-12 Fiber Holder (pair), ADC-11 AC adapter/battery charger, AC cord, carrying strap, $21,000.00 spare electrodes (pair), instruction manual, transit case. S013844 FSM-50R12 Mass Fusion Splicer Kit; CT-30 Cleaver and HJS-02 Hot Jacket Stripper in addition to the FSM-50R12, FH-50-12 Fiber $23,000.00 Holder (pair), ADC-11 AC adapter/battery charger, AC cord, carrying strap, spare electrodes (pair), instruction manual, transit case.

ACCESSORIES AND SUPPLIESpArt # Description priceSTRIPPERSS010340 HJS-02 Hot Jacket Stripper $815.39CLEAVERS S014076 CT-30 Cleaver $1,056.72FIBER HOLDERS (PAIRS)S013828 FH-50-12 $330.23S013824 FH-50-10 $330.23S013820 FH-50-8 $330.23S013816 FH-50-6 $330.23S013812 FH-50-4 $330.23S013808 FH-50-2 $330.23S013800 FH-50-250 (250µm coated single fiber) $330.23S013804 FH-50-900 (900µm jacketed single fiber) $330.23BATTERIES AND POWER CORDSS013516 ADC-11 AC Adapter/Battery Charger $563.33S013520 BTR-06S Battery (80 splice/heating cycles) $303.40S013528 BTR-06L Battery (160 splice/heating cycles) $530.95S013524 DCC-10 Power Cord (to BTR-06S or BTR-06L) $75.11S013552 DCC-12 Power Cord (to cigarette lighter socket) $131.44S013556 DCC-13 Power Cord (power source to alligator clips) $131.44

pArt # Description priceMISCELLANEOUSS002111 FAT-02 Fiber Arrangement Tool $850.00S010212 FAT-04 Fiber Arrangement Tool $466.20S008720 FAA-03 Ribbon Forming Adhesive (4 oz. bottle) $132.22S008622 FAA-03 Ribbon Forming Adhesive (0.5 liter bottle) $41.55S013532 ELCT2-20A Electrodes $100.00S010532 ASW-02 Splicing Workstation $832.50S013536 WT-6 Work Table (requires WTS-06 Table Support) $171.33S013544 WTS-06 Work Table Support $37.00S013888 Transit Case (50R12) $565.66S012996 One year extended warranty $2,100.00S013000 Two year extended warranty $3,150.00



suMitoMo Fusion splicersSUMITOMO TYPE-25U/S/M FUSION SPLICER Sumitomo’s TomCat™ splicers are the industry’s first “full-featured” hand-held fiber splicers offering both the agility and the robustness required for FTTx, premise, restoration, and optical component assembly applications. Easy-to-use, easy-to-learn, these portable battery-operated splicers reduce training time for efficient deployments—making fusion splicing the choice for both optimum reliability and affordability. Included in the “full-featured” distinction of the TomCat splicers are adjustable position monitors that allow the user to observe the fiber during the splicing process. Their front-to-back workflow makes the splicers ideal when limited fiber slack is available, in aerial, taut-sheath applications, and for component testing. Sumitomo’s fiber holder system facilitates quick and easy fiber preparation and placement. The splicers’ small footprints maximize workspace and enable precision splicing at a close proximity to the splice point for optimal flexibility. All TomCat units are optimized for both single-mode and multimode fibers and are manufactured with the same Sumitomo commitment to quality and reliability.

type-25u AnD type-25s coMponents Fusion Splicer, Fiber Cleaver, Jacket Remover, Battery, Battery Charger, V-groove Brush, Spare Electrodes, Operation Manual, 250µm Fiber Holderstype-25MContains all of the above, plus 4 Fiber Ribbon Holders

Features• Dual Camera Splice Loss Estimation (Type- 25S and Type-25M Models)• Compact, Lightweight (3.3 lbs) Design Simplifies Splicing In Confined Area• 30 Splices on a Single Battery• Two Bay Battery Charger• Automatic Arc Test• Mounting Holes for Securing the Splicer to a Workstation for Aerial, Pole, and Pedestal Applications• Fiber Holders Allow for Quick and Easy Fiber Placement• Automatic Splice In Less than 13 Seconds for SMF or MF

SPECIFICATIONSpArAMeter type-25u type-25s type-25MAlignment Method Fixed V-Groove Fixed V-Groove Fixed V-GrooveFiber Requirement Silica Glass Silica Glass Silica GlassFiber Type SMF and MMF SMF and MMF SMF and MMFCladding Diameter 125µm 125µm 125µmTypical Splice Time <13 Seconds <13 Seconds <13 SecondsHeater Time <40 Seconds <40 Seconds <40 SecondsCleave Length 10mm 10mm 10mmBattery Operation 30 Splices (Fully Charged) 30 Splices (Fully Charged) 30 Splices (Fully Charged)Number of Fiber Programs 15 15 15Arc Power Compensation Automatic Arc Test Automatic Arc Test Automatic Arc TestAltitude 0-3660m (12,000 Feet) 0-3660m (12,000 Feet) 0-3660m (12,000 Feet)Fiber Count 1 ct. 1 ct. Up to 4f RibbonTypical Splice Loss SMF/MMF 0.10/0.04dB 0.05/0.03dB 0.05/0.03dBSplice Loss Estimation No Yes YesSize 120W x 160D x 145H mm (4.7W x 6.2D x 5.7H in)Weight 1.5 kg (3.3 lbs) 1.5 kg (3.3 lbs) 1.5 kg (3.3 lbs)Power Requirement 12V DC 12V DC 12V DCWind Protection 30 mph (15 m/s) 30 mph (15 m/s) 30 mph (15 m/s)

ACCESSORIESpArt # Description priceAPF-03-KIT Aerial Work Platform Kit With Mounting Arm $595.00BC-HH2 Battery Charger and Cord $295.00BU-HH2 Battery Unit $265.00ER-9 Electrodes $158.00FC-7 Hand-held High Precision Single Fiber Cleaver $1,350.00JR-25 Jacket Remover $99.00FH-250-HH 250µm Fiber Holders $599.00FH-900-HH 900µm Fiber Holders $599.00FH-04-HH 4 ct. Fiber Ribbon (Type-25M Only) $599.00PS-HH2 AC Interface Kit $525.00FCP-BL Cleaver Blade $195.00VGB-003-CR V-groove Brush $15.00

ORDERING INFORMATIONpArt # Description priceTYPE-25U-KIT-4 Splicer Kit With Accessories, Type-25U $6,480.00TYPE-25S-KIT-4 Splicer Kit With Accessories, Type-25S $7,600.00TYPE-25M-KIT-1 Splicer Kit With Accessories, Type-25M $10,500.00



suMitoMo Fusion splicersSUMITOMO TYPE-39 FASTCAT™ CORE ALIGNMENT FUSION SPLICER FastCat TM Dual Heater Core Alignment Splicer is the industry’s first splicer to feature a Dual-Automatic Heater System featuring Auto Start Heater and Auto Start Splice functions — making the FastCat the fastest splicer available today. The Type-39 FastCat’s advanced electronic design, which accomodates the built-in dual heating system and simultaneous operation, reduces the bottle neck of “heater wait time” by 88%. With an individual heater cycle time of only 30 seconds (60mm Fiber Protection Sleeves) and a splice cycle of only 9 seconds, the FastCat improves splicing efficiency by 70%. The FastCat is a fully automatic, highly portable, self-contained instrument for creating quick and effortless low-loss optical fiber splices in any environment with a typical splice loss of only .02(dB) for identical single-mode fiber. It is designed to work with virtually all fiber types including single-mode, multimode, dispersion shifted and other spe-cialty fibers. The splicer utilizes precision High resolution Direct Core Monitoring (HDCM) technology to form repeatable low-loss splice results. HDCM and Dual Heater technologies, combined with Sumitomo Electric’s track record for reliability and customer support, make the FastCat the industry’s new standard for fusion splicers.

Features: • RoHS Compliant • Dual Independent Splice Protection Heaters • 5.6” Switchable Color Monitor for Front to Back or Back to Front Operation • Automatic Splice Start • Automatic Heater Start • Automatic Fiber Profiling Detection • Complete Splice in Less than 40 Seconds • Built-In LED for V-Groove Illumination • User-Friendly Menu Selection System • 24–Hour Tech Support 1888-SPLICER

TYPE-39-KIT-1 COMPONENTSSplicer, Spare Electrodes, AC Adapter/Batter Charger, AC Power Cord, V-Groove Brush, Cooling Tray, Monitor Cover, Quick Guide, Hard Case TYPE 39-KIT-2 COMPONENTS Includes the Above; Plus Battery, Jacket Remover, and Cleaver

SPECIFICATIONSpArAMeter VAlueProducts RoHS CompliantFiber Requirement Silica GlassCoating Diameter 100 to 1000µmCladding Diameter 80 to 150µm Cleave Length 8 to 16mm (under 250µm coated fiber) 16mm (over 250µm coated fiber) Typical Splice Loss, Identical Fibers SMF: 0.02dB, MMF:0.01dB, NZ-DSF: 0.04dBNumber of Fiber Profiles 48 CustomizableNumber of Pre-Installed 20 Customizable Heater Profiles Internal Splice Data Storage 2000Monitor Position Multiple Position MonitorInterface USB Port for PC Interface RCA Jack for External Monitor DC input for Car Battery Operation Dual Independent Heaters Each Heater: 25 seconds 40mm sleeve 30 seconds 60mm sleeveTypical Splice Time 9 Seconds Splice Cycle TimeLanguage Selections 16Arc Test Automatically Compensates for Environmental Conditions Menu Selection User Friendly Menus Return Loss <-70dBProof Test Internal 200g (Std.), 400g (Optional)Attenuation Splicing Up to 15dB in increments of 0.01dB Loss Estimation Process High-resolution Direct Core Monitoring (HDCM) Image Display Dual or Single Fiber Imaging X/Y Specifications

ACCESSORIESpArt # Description price BU-66S Standard Battery, 100 Splice and $276.00 Heater Cycles per Charge BU-66XL XL Battery, 200 Splice and Heater $553.00 Cycles per Charge PC-M2 Battery Charger Cable $58.00 ER-10 Spare Electrodes $85.00 FC-6S Precision Fiber Optic Cleaver $871.00 FC6-CATCHER FC-6 Cleaver Series Scrap Catcher $207.50JR-M01 Jacket Remover $49.30 FOM-1002X100 60mm Single Fiber Protection Sleeves $55.00PC-AC2 AC Power Cord $18.00APF-03-KIT Aerial Work Platform with Mounting Arm $595.00VGB-003-CR V-groove Brush $15.00

ORDERING INFORMATIONpArt # Description priceTYPE-39-KIT-1 Splicer Kit With Accessories, Type-39 FastCat $17,650.00 TYPE-39-KIT-2 Splicer Kit With Accessories, Type-39 FastCat $18,700.00

PHYSICAL CHARACTERISTICSSize 150W x 150D x 150H mm (5.9W x 5.9D x 5.9H in) Weight 2.8 kg (6.2 lbs) Power Requirement Input: 100 to 240V AC; 50/60Hz, 12V DC Display 5.6 Inch TFT Low Glare High Resolution Color Monitor Wind Protection 30 mph (15 m/s) Battery Operation Standard: 100 Splices & Heater Cycles Extended: 200 Splices & Heater Cycles



suMitoMo Fusion splicersSUMITOMO TYPE-65 MICRO-MASS FUSION SPLICER The Type-65 sets a new standard for reduced size and weight, and is designed for complete portability. Type-65 can be used for all types of ribbon and single-fiber splicing with an optimum arrangement for ease of use in aerial and taut-sheath applications.The Type-65 features a user-friendly software package with on-screen operation instructions that help sim-plify training requirements. It is highly portable at 6.6 lbs., and offers the user splice visibility with the fibers being displayed at approximately 40X magnification. The fiber viewing system simultaneously focuses up to 12 fibers at a time and maintains equal resolution across all fibers for improved accuracy of splice loss estimations. During battery operation, the splicer allows more than 20 splices per battery charge including heater operation.

Features:• Multi-fiber (1-12 ct.) Fixed V-grooveAlignment Metho* On Board Splice Protection Heater• 5.6” Color LCD Monitor• 30 mph Wind Protection• User Friendly Software With Help Features• Operation by AC Power or 12V Li-ion Battery• Tool-free Maintenance for Changing Electrodes• Patented Arc Test Feature to Automatically Compensate for Environmental Conditions

SPECIFICATIONSpArAMeter VAlue Alignment Method Fixed V-GrooveFiber Requirement Silica GlassFiber Type SMF, MMF and NZ-DSFCladding Diameter Ribbon: 250µm Single: 250µm and 900µmNumber of Fibers 1, 2, 4, 6, 8, 10, 12Typical Splice Loss, Identical Fibers SMF: 0.04dB, MMF: 0.03dB, NZ-DSF: 0.07dBNumber of Fusion Condition Settings 3 Fiber Profiles with 7 Pre-set Programs Each, Maximum of 48 ProgramsSplice Parameters 5 Parameters for Each ProgramArc Test Compensation AutomaticNumber of Heater Condition Settings 10Typical Splice Cycle Time 12 Fibers: 30 Seconds (Set to Loss Estimation)Splice Data Storage 500 Splice Data PointsSize 150W x 150D x 150H mm (5.9W x 5.9D x 5.9H in)Weight 3 kg (6.6 lbs)Power Requirement Input: 100 to 240V AC; (50/60 Hz): 12V DCDisplay Low Glare, 5.6 Inch Color LCD MonitorWind Protection 30 mph (15 m/s)Battery Operation (Fully Charged) 20+, 12-fiber Mass Splices, Including Protection Sleeve Heater and Thermal Jacket Remover Operation

ACCESSORIESpArt # Description priceRH-250 Fiber Holders, 250µm Fiber $500.00RH-900 Fiber Holders, 900µm Fiber $500.00RHS-02 2-Fiber Ribbon Holders $500.00RHS-04 4-Fiber Ribbon Holders $500.00RHS-06 6-Fiber Ribbon Holders $500.00RHS-08 8-Fiber Ribbon Holders $500.00RHS-12 12-Fiber Ribbon Holders $500.00BU-M1 Battery Unit $295.00PC-AC2 AC Power Cord $20.00PS-M1 Power Supply Module $875.00ER-7 Electrodes $125.00PC-2 12V DC Power Cord, 1M $12.50JR-5 Thermal Jacket Remover, With (PC-2) $1,050.00APF-03-KIT Aerial Work Platform Kit w/ Mounting Arm $595.00FAC-24 Consumable Kit for FTA-2 $2,250.00FTA-2 Fiber Arrangement Tool – Up to 12 ct. Ribbons $795.00FC-6M-C High Precision Clever, Single or Ribbon $1,350.00 With Fiber Scrap CatcherJR-5BL Replacement Blade $130.00FPS-1 Single Fiber, 250 to 900µm, 60mm, 50 Sleeves $21.50FPS-6 10 to 12 ct. Fiber Ribbons, 40mm, 25 Sleeves $6.90VGB-003-CR V-groove Brush $15.00

ORDERING INFORMATIONpArt # Description priceTYPE-65-KIT-1 Splicer Kit With Accessories, Type-65 $22,600.00TYPE-65-KIT-2 Splicer Kit With Accessories, Type-65 $23,250.00

TYPE-65-KIT COMPONENTSType-65 Fusion Splicer, Fiber Clever, Thermal Jacket Remover, RHS-12 Ribbon Holders (1 Pair), Single Fiber Holder, Power Supply Cord, Battery (With Charger Cord), Carrying Case, Spare Electrodes, V-groove Brush, Operation Manual, Cooling TrayTYPE-65-KIT-2 COMPONENTSIncludes the Above, Plus Fiber Arranger Tool and Consumable Kit

TYPE-65M24, 24 FIBER MASS FUSION SPLICER The Type-65M24 sets a new standard for productivity for high fiber count ap-plications. With its’ reduced size and weight it is also designed for complete portability. With 30 mph wind protection and a compact size, it can splice in any environment. Utilizing precision v-groove alignment, the Type-65M24 can be used for all types of ribbon and single splicing with an optimum arrange-ment for ease of use in aerial and taut-sheath applications.

TYPE-65M24-KIT COMPONENTSType-65M24 Fusion Splicer, Fiber Clever, Thermal Jacket Remover, 24 Fiber Ribbon Holders, Power Supply Cord, Battery (With Charger Cord), Carrying Case, Spare Electrodes, V-groove Brush, Operation Manual

ORDERING INFORMATIONpArt # Description priceTYPE-65M24-KIT-1 Splicer Kit With Accessories, Type-65M24 Call



splice sleeVesFOM STANDARD SLEEVE – (3.0MM AFTER SHRINK) This sleeve design is the industries highest of quality, most reliable and most economical. Standard lengths include 60mm and 40mm. Sleeves come standard with a clear outer tube for viewing the color of the fiber itself, and a steel wire for support and stability.

pArt # Description 1-99 100-249 250-999 1000+FOM-1002C 60mm Clear .65 .55 .35 .30FOM-100240C 40mm Clear .65 .55 .35 .30FOM-1002RC 60mm Red .65 .55 .35 .30

MICRO SLEEVE – (1.5mm) & MINI SLEEVE – (2.0MM) Designed for fitting in smaller splice storage areas, comes the Mini and Micro protection sleeves. Micro sleeves will only accomodate 250µm coated fibers and have an after-shrink diameter of 1.5mm Mini Sleeves will accomodate 900µm or 250µm coated fibers, and have an after-shrink diamter of 2.0mm.

pArt # Description 1-99 100-249 250-999 1000+MCRO140CFD Micro 40mm Clear .65 .55 .35 .30MCRO125CFD Micro 25mm Clear .65 .55 .35 .30MINI140CDS Mini 40mm Clear .65 .55 .35 .30MINI125CDS Mini 25mm Clear .65 .55 .35 .30

FOM RIBBON SLEEVE FOM offers two ribbon sleeve style: Dual Strength Member and Single Strength Member. The Dual Strength Member design eliminates any undue stress on the ribbon, creating a perfectly flat exit for the ribbon. Also available with a ceramic strength member.

pArt # Description 1-99 100-249 250-999 1000+FOM-10112DP Dual Strength, 40mm Clear .65 .55 .35 .30FOM-10112CP Single Strength, 40mm Clear .65 .55 .35 .30

ULTRAsleeve®Simply load the fused fiber and close the sleeve, no heat shrink curing, crimping or gluing. ULTRAsleeve® features an acrylic foam tape, which seals the sleeve and protects from the damage. The ULTRAsleeve® splice protector can be closed by hand and is installed after the splice.

pArt # Description 1-99 100-249 250-999 1000+FOM-MFS MASSsleeve® 40mm Mass Ribbon Fusion Splice Protection Sleeve .65 .55 .35 .30FOM-MFSCT MASSsleeve® Closing Tool .65 .55 .35 .30

MASSsleeve®Provides the same time-saving advantages as the ULTRAsleeve®, but for mass or ribbon fiber. This protective fusion splice sleeve can accept 2-12 ribbon splices.

pArt # Description 1-99 100-249 250-999 1000+FOM-FS40 ULTRAsleeve® 40mm Fusion Splice Protection Sleeve .65 .55 .35 .30FOM-FS60 ULTRAsleeve® 60mm Fusion Splice Protection Sleeve .65 .55 .35 .30

outer tube(Shrink Tube)inner tube(Fiber Tubestrength Member

Single Strength MemberDouble Strength Member

Splicing The Fiber Optic Marketplace, LLC Rental … · Tension Test 1.96N ... S325A One-Action...

Documents

Transcript of Splicing The Fiber Optic Marketplace, LLC Rental … · Tension Test 1.96N ... S325A One-Action...