SpinArc® Welding Process Technology - Overview
-
Upload
scott-funderburk -
Category
Technology
-
view
54 -
download
1
Transcript of SpinArc® Welding Process Technology - Overview
![Page 1: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/1.jpg)
v
Houston, Texas USAwww.weldrevolution.com
It’s all about productivity
![Page 2: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/2.jpg)
https://youtu.be/z58texOgKdQ
YouTube Channelhttps://www.youtube.com/user/weldrevolution/videos
![Page 3: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/3.jpg)
How does it work?
high speed rotation
centrifugal force all position weldinghigh deposition
![Page 7: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/7.jpg)
40% Increased Productivity
go from this... to this!
![Page 8: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/8.jpg)
Industry Segments
Transportation Ship Building Pipeline Offshore
Structural Oil & Gas Heavy Fabrication Power Generation
![Page 9: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/9.jpg)
Weld Types & Materials
Fillet Welds Groove Welds OverlayPlug Welds
Steel Aluminum High Alloy Stainless Steel
![Page 10: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/10.jpg)
v
productivity case studies
welding applications
The savings presented are for i l lustration purposes only. They are examples of potential savings and include estimates of current costs, labor & overhead rates, etc.
![Page 11: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/11.jpg)
SpinArc® Productivity SolutionReduced Bevel (60 30o) • Changed .045” FCAW-G to .052” MC
SpinArc® • 1G ceramic backing• 3/4” T (19 mm)• .052” (1.4 mm) ER70C-6, 90/10 Ar/CO2
• 30o included angle• 1/8” (3.2 mm) root opening• 16 lbs/hr (7.3 kg/kr)• 15 ipm (38 cm/min) travel speed
Sample 1
Why choose SpinArc®?• 70% weld cost reduction• 75% productivity increase• 40% less weld metal • Reduced distortion• No slag removal
SpinArc® is 3x faster0
5
10
15
20
25
30
$25.60
$7.75
Total Cost Per Foot of WeldCurrentSpinArc®
Wel
d Co
st (
$)
![Page 12: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/12.jpg)
SpinArc® Productivity SolutionReduced Bevel (37.5 20o) • .045” FCAW-G to 1/16” solid wire SpinArc®
• 1G ceramic backing• 1” T (25 mm)• 1/16” (1.6 mm) ER70C-6, 90/10 Ar/CO2
• 20o included angle• 1/8” (3.2 mm) root opening• 12 lbs/hr (5.4 kg/hr)• 17 ipm (43 cm/min) travel speed
Sample 2
Why choose SpinArc®?• 60% weld cost reduction• 50% productivity increase• 40% less weld metal• Reduced distortion• No slag removal
SpinArc® is 2x faster $-
$5
$10
$15
$20
$25
$30
$35 $32.84
$12.54
Total Cost Per Foot of Weld
CurrentSpinArc®
Wel
d Co
st (
$)
![Page 13: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/13.jpg)
SpinArc® Productivity SolutionSquare Butt Joint• 60o bevel to square butt with SpinArc®
• 1G steel backing• 1.25” T (32 mm)• 1/16” (1.6 mm) ER70S-6, 90/10 Ar/CO2
• 3/8” (9.5 mm) groove width• 14 lbs/hr (6.3 kg/hr)• 13 ipm (33 cm/min) travel speed Sample 3
Why choose SpinArc®?• 60% weld cost reduction• 60% productivity increase• 60% less weld metal• Reduced distortion• No slag removal• No beveling
SpinArc® is 2.5x faster05
10152025303540
$34.55
$13.33
Total Cost Per Foot of WeldCurrentSpinArc®
Wel
d Co
st (
$)
![Page 14: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/14.jpg)
SpinArc® Productivity SolutionSquare Butt Joint• 30o 1-sided weld to sq. butt w/
SpinArc®
• 2G, no backing• 0.25” T (6.3 mm)• 0.052” (1.4 mm) ER70S-6, 80/20
Ar/CO2
• 1/16” (1.6 mm) root opening• 10 lbs/hr (4.6 kg/hr)• 22 ipm (56 cm/min) travel speed
Sample 4
Why choose SpinArc®?• 55% weld cost reduction• 60% productivity increase• 50% less weld metal • Reduced distortion• No slag removal• No beveling
SpinArc® is 2.5x faster0.000.200.400.600.801.001.201.401.60
$1.42
$0.59
Total Cost Per Foot of WeldCurrentSpinArc®
Wel
d Co
st (
$)
![Page 15: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/15.jpg)
SpinArc® Productivity SolutionSquare Butt Joint• 60o bevel to square butt with SpinArc®
• 1G, ceramic backing• 3/8” T (9.5 mm)• .045” (1.1 mm) ER70C-6, 90/10 Ar/CO2
• 1/4” (6.3 mm) root opening• 16 lbs/hr (4.6 kg/hr)• 21 ipm (53 cm/min) travel speed
Sample 5
Why choose SpinArc®?• 63% weld cost reduction• 70% productivity increase• 25% less weld metal • Reduced distortion• No slag removal• No beveling
SpinArc® is 3x faster0.001.002.003.004.005.006.007.008.00
$6.98
$2.58
Total Cost Per Foot of WeldCurrentSpinArc®
Wel
d Co
st (
$)
![Page 16: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/16.jpg)
SpinArc® Productivity Solution¼” Fast Fillet Weld• 29 to 40 in/min travel speed with
SpinArc®
• 2F• 3/8” T (9.5 mm)• .045” (1.1 mm) ER70C-6, 80/20 Ar/CO2
• 15.5 lbs/hr (7.1 kg/hr)• 40 ipm (102 cm/min) travel speed
Sample 6a
Why choose SpinArc®?• 25% weld cost reduction• 30% productivity increase • Consistent, flat bead profile• Good tie-in to each plate and root
SpinArc® is 1.4x faster0.000.200.400.600.801.001.201.401.601.80
$1.70
$1.29
Total Cost Per Foot of WeldCurrentSpinArc®
Wel
d Co
st (
$)
![Page 17: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/17.jpg)
SpinArc® Productivity Solution3/8” Big, Single-Pass Fillet Weld• 2 passes reduced to 1 pass with
SpinArc®
• 2F• 3/8” T (9.5 mm)• .1/16” (1.6 mm) ER70C-6, 80/20
Ar/CO2
• 12.8 lbs/hr (5.8 kg/hr)• 11.5 ipm (29.2 cm/min) travel speed
Sample 6b
Why choose SpinArc®?• 25% weld cost reduction• 30% productivity increase• Large, flat single-pass fillet• Good tie-in to each plate and root• Reduced distortion
SpinArc® is 1.4x faster 0.00
1.00
2.00
3.00
4.00
5.00
6.00
$5.59
$4.16
Total Cost Per Foot of WeldCurrentSpinArc®
Wel
d Co
st (
$)
![Page 18: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/18.jpg)
SpinArc® Productivity Solution Sample 7625 Clad Overlay• 2 passes reduced to 1 pass with
SpinArc®
• 1/8” bead thickness (3.2 mm)• .045” (1.1 mm) ERNiCrMo-3, 100% Ar• 14.5 lbs/hr (6.6 kg/hr)• 11 ipm (28 cm/min) travel speed• 1” (25 mm) bead width • 3.3 ft2/hour coverage
Why choose SpinArc®?• 50% welding labor savings• 100% productivity increase• 50% less weld metal• Reduced distortion• Consistently achieve <10% Fe in 1 layer
SpinArc® is 2x faster 05
101520253035404550
$46.67
$20.00
Labor Cost Per Sq. Ft of OverlayCurrentSpinArc®
Labo
r Co
st (
$)
![Page 19: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/19.jpg)
SpinArc® Productivity Solution
Sample 8
Vertical Down• Changed .045” FCAW-G V-up to .052”
solid wire vertical down SpinArc® • 3G down• 3/8” T (9.5 mm)• .052” (1.4mm) ER70S-6, 82/10/8
Ar/He/CO2
• 10.8 lbs/hr (4.9 kg/hr)• 18 ipm (46 cm/min) travel speed
SpinArc® is 3x faster
Why choose SpinArc®?• 65% weld cost reduction• 65% productivity increase• 20% less weld metal • No slag removal• No beveling• Reduced distortion
0.00
2.00
4.00
6.00
8.00
10.00
12.00
$11.08
$3.65
Total Cost Per Foot of WeldCurrentSpinArc®
Wel
d Co
st (
$)
![Page 20: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/20.jpg)
Clad Overlay• shallow, consistent penetration • flat bead profile• ultralow iron content
(2% - 5% with single layer)• Solid or metal core wires• CV or Pulse modes• Deposition rates 5 x GTAW, and in
the SAW range, 12-15 lbs/hr (5–7 kg/hr)
• Can be utilized out of position
1.8mm Single Layer Deposit
![Page 21: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/21.jpg)
625 Clad1G Position
![Page 22: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/22.jpg)
625 Clad3G Vertical Down
![Page 23: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/23.jpg)
Clad Overlay Vertical Down
https://youtu.be/2ypRMYEdMXE
![Page 24: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/24.jpg)
Heavy Wall Pipe• 10” x 1.375” WT (254 mm x 25mm
WT)• X65 pipe• U-Groove (2-3 deg. bevel)• 1.0 mm ER-80Ni1• GMAW-P w/ 90Ar/10CO2
• TS: 24 in/min (50 cm/min)• WFS: 585 in/min (23 m/min)• DR: 12 lbs/hr (5.5 kg/hr) • Bug-O Piper Plus w/ auto height
control
![Page 25: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/25.jpg)
5G Pipe Welding Video
https://youtu.be/lQ_t47hW2Rg
![Page 26: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/26.jpg)
1G Plate• .045” (1.1 mm) E70C-6 FabCOR
86R• TS: 15.4 ipm (38 cm/min) • WFS: 600 ipm (15 m/min)• DR: 15.8 lbs/hr (7 kg/hr)• Spin: 3 @ 3,200 RPM• Square butt joint• 4 passes
3/4” (19 mm)
5/16” (8 mm)
![Page 27: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/27.jpg)
1G Plate
![Page 28: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/28.jpg)
Pass 1 Pass 2WFS 550 ipm 625 ipm(14 m/min) (16 m/min)Spin Speed (rpm) 1,500 3,000Spin Dia. (mm) 3.5 4.8
½” (12 mm) Single Sided• EH/DH 36 ship building grade material • GMAW-P (Miller AccuPulse)• 0.045” (1.1 mm) E80C-Ni1 H4, 90Ar/10CO2
• Square butt, 3/16” gap (4.7 mm)• Full Pen/One-sided w/ ceramic backing• 7/8” (22 mm) CTWD • Travel Speed: 18.5 in/min (47 cm/min)
![Page 29: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/29.jpg)
• All Weld Metal– Yield: 95.5 ksi– Tensile: 114 ksi– Elongation: 29.7%
• Cross Weld Tensile – Ductile Fracture in Base Metal– Tensile: 82 ksi
• CVN (-29 C)– Transverse Weld Metal: 25 ft-lb
avg.– HAZ: 74.3 ft-lb avg.
• Side Bends Passed
½” (12 mm) Single Sided
![Page 30: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/30.jpg)
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
100.0
120.0
140.0
160.0
180.0
200.0
220.0
240.0
260.0
280.0
300.0
Cap
Middle
Root
Distance from first indentation (inch)
Vick
ers M
icroh
ardn
ess (
1000
g lo
ad)
MicrohardnessCap
Middle
Root
![Page 31: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/31.jpg)
¼” (6 mm) Single Pass
• Full Pen/One-sided with ceramic backing• .045” (1.1 mm) E80C-Ni1 H4 metal core• Miller CV, 90Ar/10CO2
• Groove: Square Butt
• Root Opening: 3/32” (4.7 mm) • CTWD: 7/8”
(22 mm)• Travel Speed: 30 in/min
(76 cm/min)• WFS: 750
ipm • Dep Rate: 22 lbs/hr
(10 kg/hr)• Voltage: 28.5• Spin Speed: 3,500 rpm• Spin Diameter: 5 mm
![Page 32: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/32.jpg)
Microhardness
Cap
Middle
Root
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
100.0
120.0
140.0
160.0
180.0
200.0
220.0
240.0
260.0
280.0
300.0
Cap
Middle
Root
Distance from from first indentation (inch)
Vick
ers M
icroh
ardn
ess (
1000
g lo
ad)
![Page 33: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/33.jpg)
Distortion Comparison ¼” (6 mm) Single Pass
Reduced Distortion on high strength 4130
SpinArc®
Conventional SpinArc®
Longitudinal (4” from plate CL)
0.040” (1 mm)
< 0.020” (0.5 mm)
Angular(4” from weld CL)
0.140”(3.6 mm)
< 0.010”(0.3 mm)
![Page 34: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/34.jpg)
One-Sided, 30° Single-Vee• 3/4” (19 mm) mild steel• 30° included bevel• Full pen, 1 side• 4 passes• .052” (1.3 mm) metal core• GMAW-P (root), CV (fills & cap)• 80/20 Ar/CO2
• 13.5 lbs/hr (6 kg/hr)
![Page 35: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/35.jpg)
One Sided, 15° Single Bevel • 3/4” (19 mm) mild steel• 15° Single Bevel • Full Penetration, 1 side• .052” (1.3 mm) metal cored • GMAW-P (root, 2G)• CV (2 fills & 1 cap, 1G)• TS: 18 IPM (46 cm/min)• WFS: 350 IPM (9 m/min)• DR: 12 lbs/hr (5.4 kg/hr)
![Page 36: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/36.jpg)
Column Splice, 15° Single BevelProblem:• long weld time• Typically, 35o included angle
SpinArc® Solution:• 15o reduced bevel• 40% weld Metal, full fusion• 5 passes• 0.045” (1.2 mm) solid wire• 450 ipm (11.4 m/min) WFS • Root to cap• Meets Customer Expectations
![Page 37: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/37.jpg)
15° Beam-to-ColumnProblem:• Fusion to the bevel side• Joint is notorious for LOF (bevel side)• Large bevel, typically, 37.5o included angle
SpinArc® Solution:• Equal toe fusion• Spin allows for fusion on both walls• 40% less weld metal and time• 4 passes• .052” (1.3 mm ) solid wire• 575 ipm (14.6 m/min) WFS• 18 ipm (45.7 cm/min) Travel Speed• Root To cap
![Page 38: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/38.jpg)
v
Guidelines SpinArc® Welding
![Page 39: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/39.jpg)
Groove DesignsThickness Groove Width Backing or
Root Land
1/2“ – 1 ¼” (12-32 mm)
3/8”(10 mm) Needed
3/8” – 1/2”(10-12 mm)
3/16” – 3/8”(5-10 mm) Needed
1/4” – 3/8”(6-10 mm)
3/32” – 1/8”(2-3 mm) Needed
1/8” – 1/4”(2-6 mm)
1/16” – 3/32”(1.6-2 mm) Optional
1/16” – 1/4”(1.6-6 mm) 0” Optional
Welding in Groove
Welding on top of Groove
![Page 40: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/40.jpg)
Groove Designs for T > 1 ¼” (32 mm)
Example:35% efficiency improvement$55.00/ft. ($17/m) cost reductionx 1,500 ft. (457 m) per month =$75,000/month savings
![Page 41: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/41.jpg)
Typical Operating Ranges - Steel Sp
in D
iam
eter
Setti
ng
1
23
4
5
6
7
8
1000 2000 3000 4000 5000
Clad Overlay
Pipe Narrow Groove
Sheet & Plate up to ¼”
Plate Square Groove Butt
Fillets
Spin Speed, RPM
![Page 42: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/42.jpg)
1 2 3 4 5 6 7 80
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000Recommended Operating Range
Spin Diameter (Crank Setting)
Spin
Spe
ed (r
pm)
Recommended Operating Range
Recommended Operating Range
Crank Setting Max RPM
1 5500
2 5500
3 5500
4 4500
5 3500
6 2750
7 2000
8 1200
Flexure
![Page 43: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/43.jpg)
Productivity STUDIES
Conventional
SpinArc®
![Page 44: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/44.jpg)
¾” (19 mm) plate example:
52% cost reduction0.4 month payback period
![Page 45: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/45.jpg)
v
MA-400 SpinArc® System Mechanized SpinArc® System
plug & p lay for an insta nt upg ra de
![Page 46: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/46.jpg)
SpinArc®
SYSTEMControl Box
Control Cable
Aux Arc On (optional)Trigger
SpinArc® Torch
![Page 47: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/47.jpg)
MA-400 SpinArc® System
System includes… SpinArc® torch and cable, control box, & control
cables
400 Amp, 100% duty cycle, air cooled0.035 – 1/16” (0.9 – 1.6 mm) wire
3 – 20 ft. (1.8 – 6.1 m) cablesGMAW, GMAW-P, FCAW
Rated to IEC/EN 60974-7
1.75” (44 mm)
12” (300 mm)
![Page 48: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/48.jpg)
Control Box
Manual or remote mode
CW or CCW spin direction
110-240 VAC, 50/60 Hz
Spin Delay (0-5 sec)
200 – 5,500 rpm
CSA, RoHS Compliant
![Page 49: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/49.jpg)
Plug ‘n PlayALL FEEDERS
![Page 50: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/50.jpg)
AdjustableSPIN DIAMETER
Spin Diameter Settings (1-8)
![Page 51: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/51.jpg)
Spin Speed and DiameterAffect of Spin Speed (RPM) on Spin Diameter: https://youtu.be/23r348Rej4g
![Page 52: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/52.jpg)
Piper Plus– Integrated SpinArc® controls– Inclinometer – Infinitely adjustable weld
parameters– Fully integrated with Bug-O
mechanized welding systems
![Page 54: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/54.jpg)
Pipe Welding BUG & BAND
![Page 55: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/55.jpg)
Flexible MECHANIZATION
![Page 56: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/56.jpg)
Semi-Automatic HAND WELDING KIT
![Page 57: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/57.jpg)
RoboticINTEGRATION
![Page 58: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/58.jpg)
less weld metalexcellent toe wetting
smooth bead profilecontrol bead
size/penetration
fast travel speedperfect side wall fusion
consistent HAZcleaner weld by puddle stirring
it’s all aboutPRODUCTIVITY +
QUALITY
![Page 60: SpinArc® Welding Process Technology - Overview](https://reader033.fdocuments.net/reader033/viewer/2022042706/588adf2b1a28abab6c8b4ffb/html5/thumbnails/60.jpg)
Customer Assistance PolicyWeld Revolution LLC does not warrant or guarantee or assume any liability with respect to any information or advice given. Our employees are not in a position to verify the information provided or to evaluate the engineering requirements for any customer. Additionally, the provision of any information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed. The selection and use of specific products sold by the Company is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of the Company affect the results obtained in applying these types of fabrication methods and service requirements.