Speedtronic Mark VI Controls Course
3
7/30/2019 Speedtronic Mark VI Controls Course http://slidepdf.com/reader/full/speedtronic-mark-vi-controls-course 1/3 Description: This program is intended for all control technicians and engineers, no matter their level of experience. The training will offer the attendees in-depth knowledge to work with the Mk VI control system in application with the gas turbine. This training will familiarize them with the hardware and software components of the control system. It will develop strong skills in process alarm troubleshooting and analysis of the control code. Additional training includes LVDT calibration, control interface (Cimplicity HMI) software programming, sequence editing and diagnostic alarm troubleshooting. A Mark VI simulator will be used to provide the participants with some hands on training. Course Duration: 10.0 Days Course Outline: Day 1 Course outline / objectives Equipment review Overview of turbine / control systems GE documentation conventions Control Specs Piping Schematics I/O report Panel / network layout Day 2 Controls Fundamentals TMR operation / design philosophy Panel layout Introduction to operator interface(HMI) configuration Day 3 HMI / Mk VI file structure Operator interface (HMI) displays Introduction to graphics application software (Cimplicity) Introduction to controller application software (Toolbox) Exercise: Finder (the application software search engine) Day 4 Introduction to software configuration Exercise: Signal Tracing VPRO configuration / protection software Blockware concepts and diagrams Day 5 Blockware functions and algorithms Home About Us Services Training Experience News Contact Us dtronic Mark VI Controls Course http://www.gtc-services.com/training/95-speedtronic-mark-vi-contro 9/12/2012
-
Upload
mkhalil410 -
Category
Documents
-
view
267 -
download
2
Transcript of Speedtronic Mark VI Controls Course
7/30/2019 Speedtronic Mark VI Controls Course
http://slidepdf.com/reader/full/speedtronic-mark-vi-controls-course 1/3
Description: This program is intended for all control technicians and engineers, no matter their level of
experience. The training will offer the attendees in-depth knowledge to work with the Mk VI control system in
application with the gas turbine. This training will familiarize them with the hardware and software components
of the control system. It will develop strong skills in process alarm troubleshooting and analysis of the control
code. Additional training includes LVDT calibration, control interface (Cimplicity HMI) software programming,
sequence editing and diagnostic alarm troubleshooting. A Mark VI simulator will be used to provide the
participants with some hands on training.
Course Duration: 10.0 Days
Course Outline: Day 1
Course outline / objectives
Equipment review
Overview of turbine / control systemsGE documentation conventions
Control Specs
Piping Schematics
I/O report
Panel / network layout
Day 2Controls Fundamentals
TMR operation / design philosophy
Panel layout
Introduction to operator interface(HMI) configuration
Day 3HMI / Mk VI file structure
Operator interface (HMI) displays
Introduction to graphics application software (Cimplicity)
Introduction to controller application software (Toolbox)
Exercise:Finder (the application software search engine)
Day 4Introduction to software configuration
Exercise:Signal Tracing VPRO configuration / protection software
Blockware concepts and diagrams
Day 5
Blockware functions and algorithms
Home
About Us
Services
Training
Experience
News
Contact Us
dtronic Mark VI Controls Course http://www.gtc-services.com/training/95-speedtronic-mark-vi-contro
9/12/2012
7/30/2019 Speedtronic Mark VI Controls Course
http://slidepdf.com/reader/full/speedtronic-mark-vi-controls-course 2/3
Alarm Trace #1
Alarm Trace #2
Alarm Trace #3
Day 6Forcing signals / changing control constants
Exercise:Toolbox: Logic and Analog Forcing / Control Constants
Introduction to signal data base (SDB) Exercise:
Using the SDB
Day 7Hardware configuration
LVDT calibration procedure
Exercise:LVDT Calibration
Day 8Sequencing editing
Adding software changes
Validation / build /download
Exercise:Adding I/O and Alarm
Cimplicity #2
Adding a Macro
Day 9Troubleshooting / diagnostics
Exercise:Toolbox: “Ready to Start”
Trending
Exercise:Toolbox: Trending
Day 10
Trip historyMk VI toolbox graphics / data collection
Questions & Answers / Review / Final Test
GTC Services LtdFortis House
160 London Road
Barking
IG11 8BB
Tel: +44 (0) 208 214 1380
Fax: +44 (0) 208 214 1001
e-mail: [email protected]
Site Map
Contact Us
dtronic Mark VI Controls Course http://www.gtc-services.com/training/95-speedtronic-mark-vi-contro
9/12/2012
7/30/2019 Speedtronic Mark VI Controls Course
http://slidepdf.com/reader/full/speedtronic-mark-vi-controls-course 3/3
In order for our website to fully optimized in your browser, please make sure you have the latest version of your web browser.
dtronic Mark VI Controls Course http://www.gtc-services.com/training/95-speedtronic-mark-vi-contro
9/12/2012
