Specifications - Propane LPG Anhydrous Ammonia NH3 ...€¦ · construction, is our standard....
Transcript of Specifications - Propane LPG Anhydrous Ammonia NH3 ...€¦ · construction, is our standard....
Specifications● New manufactured tank w skid.● ASME Section VIII/Div 1
code compliant● National board certified
● Fully valved at factory and leak tested● No over width permitting needed.● Built to tough, oil field rugged
construction, is our standard.
CANADA: + 1 800 205-6871 • USA: +1 850-698-7192 • MÉXICO: +521 811-790-48-02Email: [email protected]
Contact us today to learn more about LPG Skid Tanks and how Liquid Partners can fulfill your LPG tank needs.
18,000 GALLON STORAGE TANK / WITH STEEL SADDLES and skid• Dbl I beam Skid 6” height X 52 “ long• Steel saddles 6”height• 250 LB. WORKING PRESSURE / 102” OD• COMPLETE NEW VALVE PACKAGE• (1) Visual Sight Gauge installed• (1) ¾” Combo Valve at 85% level w/Vent Valve & Liquid
filled #400psi pressure gauge• (1) 3” MEC 2 way Internal Valve rated 300gpm for liquid
outtake for pump• (2) 2” MEC 2-way Internal Valves rated 250gpm: (1) for
liquid in and (1) for Vapor Service• All placards and signage are included with tanks to be
installed after tank transport• Hose Rack to protect hoses from ground exposure and
tripping hazards
OPERATED BY VAPOR PRESSURE, NITROGEN, OR CUSTOMER SUPPLIED PRESSURE SOURCE (DRY AIR, CO2)• Truck loading / unloading ESV’s (Provides protection at
bulkhead)• (1) 2’ Snappy-Joe w/ Pneumatic Shut Down• ( 1) 1 ¼” Snappy-Joe for Vapor Equalizing Connection
between Truck and Tank• (1) 2” Sight flow back check to visually confirm movement
and unloading of product into Tank• 14” Risers connected to Pneumatic System to provide
System Shut Down in the event of pull awayCUSTOMER OPTIONS:• Blackmer 3” Pump, Motor, Base Assembly, 10HP 3-Phase
motor w/ bypass. Approx 170gpm• Blackmer 2” Pump, Motor, Base Assembly, 7 HP Single
Phase Motor w/ bypass. Approx 70gpm• Liquid Controls Meter 2” or 3” designed to customer specs• Bulkhead can be configured on either side of the Tank• Fitted with Openings and fitted with desired equipment at
both ends• Configured with or without pumps• Hose Rack to protect hoses from ground exposure and
tripping hazards• Tanks must and will be constructed to meet or exceed
NFPA 58, 2011 code requirement
CANADA: + 1 800 205-6871 • USA: +1 850-698-7192 • MÉXICO: +521 811-790-48-02Email: [email protected]
Contact us today to learn more about LPG Skid Tanks and how Liquid Partners can fulfill your LPG tank needs.