Specifications - Moen• 4" centerset metering faucet • Vandal resistant OPERATION • ADA...
2
There is more than 1 version of this model. Page down to identify the version you have. MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 www.moen.com CRITICAL DIMENSIONS (DO NOT SCALE) Specifications COMMERCIAL FAUCET DESCRIPTION • Chrome plated solid brass construction • 4" centerset metering faucet • Vandal resistant OPERATION • Operates with water supply line pressures of 20 to 125psi • ADA compliant lever style handle with hot and cold indicators • Cycle time easily adjusted from 5 to 60 seconds, independent from water pressure • Factory preset to automatically shut off after 10 seconds • 1/2" IPS supply shanks FLOW • 0.5gpm max (1.9 L/min) vandal-resistant multi-stream laminar flow limits water discharge to a maximum of 0.25gpc (0.95 L/cycle) @ 30 seconds or 0.20gpc (0.76 L/cycle) @ 24 seconds CARTRIDGE • 52100 brass shell cartridge • Self contained metering mechanism which is separate from the potable water supply STANDARDS • Third party certified to ASME A112.18.1/CSA B125.1, and all applicable specifications referenced therein • Contains no more than 0.25% weighed average lead content • for lever handles • CalGreen compliant WARRANTY • Warranted for 5 years against material or manufacturing defects Two-Handle ADA Metering Lavatory Faucet Model: 8886 (Chrome) NOTE: DESIGNED TO INSTALL THROUGH 2-1" MIN. DIA. HOLES. 4" ON CENTER 4" (102mm) 2-1/8" max (54mm) 6" (152mm) 1-1/4" (31mm) 3-1/2" (89mm) 2-7/8" (73mm) 6-1/2" (164mm) 4-3/4" (120mm) Rev. 10/15 ADA
Transcript of Specifications - Moen• 4" centerset metering faucet • Vandal resistant OPERATION • ADA...
There is more than 1 version of this model.Page down to identify the version you have.
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158www.moen.com
CRITICAL DIMENSIONS(DO NOT SCALE)
SpecificationsC O M M E R C I A L
FAUCET DESCRIPTION• Chrome plated solid brass construction• 4" centerset metering faucet • Vandal resistant OPERATION• Operates with water supply line pressures of 20 to 125psi • ADA compliant lever style handle with hot and cold indicators • Cycle time easily adjusted from 5 to 60 seconds, independentfrom water pressure
• Factory preset to automatically shut off after 10 seconds• 1/2" IPS supply shanksFLOW• 0.5gpm max (1.9 L/min) vandal-resistant multi-stream laminarflow limits water discharge to a maximum of 0.25gpc (0.95 L/cycle) @ 30 seconds or 0.20gpc (0.76 L/cycle) @ 24 seconds
CARTRIDGE• 52100 brass shell cartridge• Self contained metering mechanism which isseparate from the potable water supply
STANDARDS• Third party certified to ASME A112.18.1/CSA B125.1, and allap pli ca ble specifications referenced therein
• Contains no more than 0.25% weighed average lead content • for lever handles• CalGreen compliantWARRANTY• Warranted for 5 years against materialor manufacturing defects
Two-Handle ADA MeteringLavatory Faucet
Model: 8886 (Chrome)NOTE: DESIGNED TO INSTALL THROUGH2-1" MIN. DIA. HOLES. 4" ON CENTER
4"(102mm)
2-1/8" max(54mm)
6"(152mm)
1-1/4"(31mm)
3-1/2"(89mm)
2-7/8"(73mm)
6-1/2"(164mm)
4-3/4"(120mm)
Rev. 10/15
ADA
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158www.moen.com
CRITICAL DIMENSIONS(DO NOT SCALE)
SpecificationsC O M M E R C I A L
FAUCET DESCRIPTION• Chrome plated brass construction• 4" centerset metering faucet • Vandal resistant OPERATION• ADA compliant lever style handle with hot and cold indicators• Metering mechanism is adjustable, to allow the installer tocompensate for supply line pressures of 20 to 80 psi.
• Cycle time easily adjusted from 5 to 60 seconds• Factory preset to automatically shut off after 10 seconds at 80 psi• 1/2" IPS supply shanksFLOW• Vandal resistant aerator limits water discharge to amaximum of .25 gpc (.95 L/cycle) or .50 gpm
CARTRIDGE• 16352 cartridge design• Nonmetallic and nonferrous material• Self contained metering mechanism which isseparate from the potable water supply
STANDARDS• Third party certified to ASME A112.18.1/CSA B125.1, and allap pli ca ble specifications referenced therein
• for lever handlesWARRANTY• Warranted for 5 years against materialor manufacturing defects
Two-Handle ADA MeteringLavatory Faucet
Model: 8886 (Chrome)
NOTE: DESIGNED TO INSTALL THROUGH2-1" MIN. DIA. HOLES. 4" ON CENTER
4"(102mm)
2-1/8" max (54mm)
6"(152mm)
1-7/8"(47mm)
4"(101mm)
1-15/16" (49mm)
7-1/4" (184mm)
5-1/8" (130mm)
Rev. 5/10
ADA
