Specifications - Edge 300 Series - Karrankarransinks.com/images/pdf/Specifications - Edge 300...

ED

GE

SE

RIE

S

Model: E-360R

Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface

Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com

Shown in LaminateInstallation: Seamless

Shown in Solid SurfaceInstallation: Seamless

Shown in StoneInstallation: 1/8” Overhang

ALL DIMENSIONS ACCURATE TO 1/4”

TOP ELEVATION

FRONT ELEVATION SIDE ELEVATION

Karran, your source for seamless integration

Recommended edge profiles in solid surface

Features and Specifications: Large/small bowl kitchen sink. 32-3/8” x 21-1/8” x 8-3/8” / 6-1/4”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Lowered bowl divider [height - 6-3/4”]. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer baskets shown not included with sink.

21-1/8” 18-1/2”

14-3/4” 13-5/8”

16”

32-3/8”

8-3/8”8-3/8”

6-1/4”

6-3/4”

4-1/2”

4-1/2”

7-3/8”

ED

GE

SE

RIE

S

Model: E-350







TOP ELEVATION




Features and Specifications: Double equal bowl kitchen sink. 32-3/8” x 19” x 8-1/2”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Lowered bowl divider [height - 6-3/4”]. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer baskets shown not included with sink.

19”

14-1/8”

16-1/2” 16-1/2”

14-1/8”

32-3/8”

8-1/2”8-1/2”8-1/2”

6”

7”

ED

GE

SE

RIE

S

Model: E-340







TOP ELEVATION




Features and Specifications: Extra large single bowl kitchen sink. 30-3/4” x 18-7/8” x 9”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink.

16-3/8”18-7/8”

28-3/8”

30-3/4”

9”9”

14-1/8”

5”

ED

GE

SE

RIE

S

Model: E-330







TOP ELEVATION




Features and Specifications: D-shaped single bowl kitchen sink. 23-3/8” x 21-1/8” x 9”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink.

21-1/8”

21-1/8” 18-3/4”

23-3/8”

9”9”

5”

10-1/2”

ED

GE

SE

RIE

S

Model: E-320







TOP ELEVATION




Features and Specifications: Single bowl kitchen sink. 24-1/8” x 18-1/8” x 9”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink.

21-3/4”

18-1/8” 15-3/4”

24-1/8”

9”9”

4-1/2”

10-7/8”

ED

GE

SE

RIE

S

Model: E-315







TOP ELEVATION




Features and Specifications: Bar/prep sink. 15-7/8” x 17-7/8” x 8”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink.

13-5/8”

17-7/8” 15-5/8”

15-7/8”

8”8”

5-1/2”

6-3/4”

ED

GE

SE

RIE

S

Model: E-310







TOP ELEVATION




Features and Specifications: Bar/prep sink. 12-7/8” x 14-7/8” x 6-1/2”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink.

14-7/8”

12-7/8”

12-3/8”

10-3/8”

6-1/2”6-1/2”

6-1/4”

5-1/4”

ED

GE

SE

RIE

S

Model: E-305







TOP ELEVATION




Features and Specifications: Vanity sink 15-1/4” x 15-1/4” x 5-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 1-3/4”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. This sink does not have an overflow.

ADA Compliant when installed per Americans with DisabilitiesAct Accessibility Guidelines, Section 606 Sinks. 15-1/4”

6-1/2”

13”

6-1/2” 15-1/4”13”

5-3/4”5-3/4”

ED

GE

SE

RIE

S

Model: E-303







TOP ELEVATION




Features and Specifications: Vanity sink 17-1/2” x 14-3/8” x 5-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. 1-1/4” x 3/4” machined, resin matrix rim.

Waste opening: 1-3/4”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. This sink does not have an overflow.

ADA Compliant when installed per Americans with DisabilitiesAct Accessibility Guidelines, Section 606 Sinks.

17-1/2”

14-3/8”

12-1/4”

15-1/2”

5-3/4”5-3/4”

7-3/4”

3-1/2”

Specifications - Edge 300 Series - Karrankarransinks.com/images/pdf/Specifications - Edge 300...

Documents

Transcript of Specifications - Edge 300 Series - Karrankarransinks.com/images/pdf/Specifications - Edge 300...