Specification Sheet NovAseptic Valve Inductive Position ... · NovAseptic® Valve Inductive...
Transcript of Specification Sheet NovAseptic Valve Inductive Position ... · NovAseptic® Valve Inductive...
NovAseptic® Valve Inductive Position Indicator Unit, Namur, ATEX Catalogue Number:
AX##/P11- ¤
Nominal Dimensions in mm (in.) AX##/P11
-
A
B
C
Compatible Actuator AX##/110
AX12/P11 -PTFE-SEV
44.0(1.732)
5.0(0.197)
30.0(1.181)
AX12/110
AX18/P11 -PTFE-SEV
44.0(1.732)
5.0(0.197)
30.0(1.181)
AX18/110
AX25/P11 -PTFE-SEV
44.0(1.732)
10.0(0.394)
30.0(1.181)
AX25/110
AX38/P11 -PTFE-SEV
44.0(1.732)
10.0(0.394)
30.0(1.181)
AX38/110
AX51/P11 -PTFE-SEV
44.0(1.732)
15.0(0.591)
30.0(1.181)
AX51/110
AX76/P11 -PTFE 71.0(2.795)
20.0(0.787)
30.0(1.181)
AX76/110
¤
A
C
B
Specification Sheet
Note: The Indicator is preset for PTFE or SEV (Silicone and EPDM) diaphragms.
Merck Millipore and the M mark are registered trademarks of Merck KGaA, Darmstadt, Germany.NovAseptic is a registered trademark of Millipore AB.Specifications subject to change without notice.Lit. No. SP1147EN00 Rev. B 05/2014 DP SBU-11-04698 Printed in the USA.©2014 EMD Millipore Corporation, Billerica, MA, USA. All rights reserved.
www.merckmillipore.com
To Place an Order or Receive Technical AssistanceIn Europe, please call Customer Service:France: 0825.045.645Spain: 901.516.645 Option 1Germany: 01805.045.645Italy: 848.845.645United Kingdom: 0870.900.46.45For other countries across Europe, please call: +44 (0) 115 943 0840 Or visit www.merckmillipore.com/officesFor Technical Service visit: www.merckmillipore.com/techservice
SpecificationsNet Weight (approximate)Indicator AX##/P11-
Weight kg (lb) 0.6 (1.3)
MaterialBodyConstructed of
IndicatorConstructed of
Material Code SS 2346 POM C
Sensor Data
R:1K Ohm+ Brown
+ Brown
- Blue
- Blue
R:1K Ohm
I 1mA
I 3mA 7....12V DC
7....12V DC
Supply Voltage 7....12V DC
Closed OpenType of Exit Namur 2 wire
Output Function N/C
Maximum Switching Frequency 1000Hz
Degree of Protection IP 67
Temperature of Operation T6
Category 2
Class 2 GD
Class (Electrical) 2 GD-ai
Explosion Group IIB
Electrical Cord 5m
Additional Technical Data on the ProductSurface Roughness External surface Ra ≤ 1.6 μm (63 μin)
Environment Temperature 0 to 70 ºC (32 to 158 ºF)
Labeling The indicator is labeled with an ATEX label.
Packaging The indicator is sealed in a plastic bag.
Quality Control Our Quality Assurance System guarantees the control and traceability of the product.
Technical Rating II 1 GD c IIB T4 0 °C ≤ Ta ≤ +70 °C
¤
Nominal Dimensions in mm (in.)
PA##/P11 - ¤ A B C D PA##/100 PA##/110 PA##/111
PA12/P11-PTFE-SEV
44.0(1.732)
5.0(0.197)
30.0(1.181)
26.4(1.039) PA12/100 PA12/110 PA12/111
PA18/P11 -PTFE-SEV
44.0(1.732)
5.0(0.197)
30.0(1.181)
26.4(1.039) PA18/100 PA18/110 PA18/111
PA25/P11 -PTFE-SEV
44.0(1.732)
10.0(0.394)
30.0(1.181)
26.4(1.039) PA25/100 PA25/110 PA25/111
PA38/P11 -PTFE-SEV
44.0(1.732)
10.0(0.394)
30.0(1.181)
26.4(1.039) PA38/100 PA38/110 PA38/111
PA51/P11 -PTFE-SEV
44.0(1.732)
15.0(0.591)
30.0(1.181)
26.4(1.039) PA51/100 PA51/110 PA51/111
PA76/P11 -PTFE 71.0(2.795)
20.0(0.787)
30.0(1.181)
26.4(1.039) - PA76/110 -
NovAseptic® Valve Inductive Position Indicator Unit, Namur
Catalogue Number PA##/P11- ¤
Inductive Position Indicator Unit, Namur Configuration
Specification Sheet
Compatible Actuators
D
A
C
B
Note: The Indicator is preset for PTFE or SEV (Silicone and EPDM) diaphragms.
Specification Sheet NovAseptic Valve, Inductive Position Indicator Unit, Namur �� PA##/P11 �� PA##/P11- ¤
Specifications
Net Weight (approximate)
Indicator PA##/P11- ¤Weight kg (lb) 0.6 (1.3)
Material
BodyPlastic in Compliance with
IndicatorPlastic in Compliance with
Material Code POM C
Socket Connection:
Supply Voltage 7....12V DC
Type of Exit Namur 2 wire
Output Function N/C
Maximum Switching Frequency 1000Hz
Degree of Protection IP 67
R : 1 K O h m+ B r o w n
+ B r o w n
- B l u e
- B l u e
R : 1 K O h m
I ≤ 1mA
I ≥ 3mA 7 . . . . 1 2 V D C
7 . . . . 1 2 V D C
C l o s e d O p e n
Specification Sheet NovAseptic Valve, Inductive Position Indicator Unit, Namur �� PA##/P11 �� PA##/P11- ¤
Specifications
For additional information call your nearest Millipore office or visit us at www.millipore.com. In the U.S. and Canada, call toll-free 1-800-MILLIPORE (1-800-645-5476). In the U.S., Canada and Puerto Rico, fax orders to 1-800-MILLIFX (1-800-645-5439).
To Place an Order or Receive Technical Assistance
Surface Roughness: Smooth
Environment Temperature: 0 to 70 ºC (32 to 158 ºF)
Labeling: Each Indicator is labeled.
Packaging: The Indicator is sealed in a plastic bag.
Quality Control: Millipore Quality Assurance System guarantees the control and traceability of the product.
Millipore and NovAseptic are registered trademarks of Millipore Corporation or an affiliated company. Specifications subject to change without notice. Lit. No. SP1125EN00 Rev. -, 09/2006. Replaces DS-070 Replaces DS-070 © 2006 Millipore Corporation. All rights reserved.
NovAseptic® Valve Inductive Position Indicator Unit Catalogue Number PA1251/SP Single Position
Specification Sheet
Inductive Position Indicator Unit
Nominal Dimensions in mm (in.)
PA## A B C D PA ##/100 PA ##/110 PA ##/111
PA1251/SP 53.0(2.087)
5.0(0.197)
30.0(1.181) 30.9 (1.217) PA12/100 PA12/110 PA12/111
PA1251/SP 53.0(2.087)
5.0(0.197)
30.0(1.181) 30.9 (1.217) PA18/100 PA18/110 PA18/111
PA1251/SP 53.0(2.087)
5.0(0.197)
30.0(1.181) 30.9 (1.217) PA25/100 PA25/110 PA25/111
PA1251/SP 53.0(2.087)
5.0(0.197)
30.0(1.181) 30.9 (1.217) PA38/100 PA38/110 PA38/111
PA1251/SP 53.0(2.087)
5.0(0.197)
30.0(1.181) 30.9 (1.217) PA51/100 PA51/110 PA51/111
Net Weight (approximate)
Indicator PA1251/SP
Weight kg (lb) 0.06 (0.13)
Material Body Indicator
plastic in compliance with plastic in compliance with
Material Code POM C
Socket Connection: M12x1
Power Supply 24V DC
Power Limits 10-30V DC
Output Current Max 100Ma in open or closed position, overload and short circuit protection
No Load Current Consumption <15mA
Degree of Protection IP65
Millipore, NovAseptic and Advancing Life Science Together are registered trademarks of Millipore Corporation. The M mark is a trademark of Millipore Corporation.
Lit. No. SP1202EN00 Rev. A 8/10
©2010 Millipore Corporation, Billerica MA, 01821 USA. All rights reserved.
Specifications
Surface Roughness Smooth
Environment Temperature 0 to 40 ºC (32 to 104 ºF) Under limited time 70 ºC (158 ºF)
Labeling Each Indicator is labeled.
Packaging The Indicator is packaged in a plastic bag.
Quality Control Millipore Quality Assurance System guarantees the control and traceability of the product.
Example
Signal output as a function of the position of a normal open or normal closed pneumatic actuator when mounted according to the mounting instructions.
Actuator Normally Closed Actuator Normally Open
For ADDItIoNAl INForMAtIoN CAll your NEArESt MIllIPorE oFFICE:
In the U.S. and Canada, call toll-free 1-800-MILLIPORE (1-800-645-5476)
In the U.S., Canada and Puerto Rico, fax orders to
1-800-MILLIFX (1-800-645-5439)