CUSTOM CNC MACHINING AND FABRICATING SHOP INCLUDINGMAZAK CNC VMC’S AND LATHES, MITSUBISHI LASERS, PRESS BRAKES,

FABRICATING, WELDING, TOOLROOM INSPECTION AND SHOP EQUIPMENT

CUSTOM CNC MACHINING AND FABRICATING SHOP INCLUDINGMAZAK CNC VMC’S AND LATHES, MITSUBISHI LASERS, PRESS BRAKES,

FABRICATING, WELDING, TOOLROOM INSPECTION AND SHOP EQUIPMENTSee Instructions on Page 3

To Become a Qualified Bidder on the Internet

SALE DATE: WEDNESDAY, JULY 11TH, STARTING AT 9:00 AMSALE DATE: WEDNESDAY, JULY 11TH, STARTING AT 9:00 AMINSPECTION: TUESDAY, JULY 10TH, FROM 10:00 AM TO 4:00 PM

SPECIALTY TOOL & MACHINE CO., INC.AND LTS INDUSTRIES, INC.

SPECIALTY TOOL & MACHINE CO., INC.AND LTS INDUSTRIES, INC.

3331 Gilmore Industrial Boulevard – Louisville, Kentucky 40213South of Downtown, near the airport

Plant Closed – Ordered Sold by Secured Creditor

Lincoln Fanuc System 35 CNC Robotic Welding Cell

(2) Mazak Nexus 510C-II CNC Vertical Machining Centers

176 Ton x 157” Adira Model QHD-16040 CNC PressBrake

3,500 Watt Mitsubishi Model ML-3015-LVP(S)Shuttle Table CNC Laser

(2) Mazak Model QT Nexus 250-II CNC TurningCenters

NEW2010

NEW2014

NEW2006

NEW AS2013

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | info@cia-auction.com2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

1851382Y CIA Specialty Tool and Machine Co-4 6/19/18 10:21 AM Page 1

WEDNESDAY, JULY 11TH – 9:00 AMWEDNESDAY, JULY 11TH – 9:00 AM

CNC VERTICALMACHININGCENTERS(2) Mazak Nexus 510C-IICNC Vertical MachiningCenters; s/n 189264 (11/2006)and 219440 (4/2010), MazakMatrix Nexus Voice AdviserControl, 21” x 51” Table, 41” x20” x 20” Travels, 40 Taper,Coolant (2006/2010)(2) SMW 4th Axis TablesMazak Model VTC-20CCNC Vertical MachiningCenter; s/n 123281, 20” x 78”Table, No. 40 Taper (1997)Mazak Model AJV-25/404CNC Vertical MachiningCenter; s/n 77915, Spindle outof machine (1988)(100) No. 40 Toolholders

CNC TURNINGCENTERS AND BARFEEDS(2) Mazak Model QT Nexus250-II CNC TurningCenters; s/n 248037 (6/2013)and 189208 (11/2006), MazatrolMatrix Nexus Control, 8” Chuck,12-Pos. Turret, Tailstock(2006/2013)

• LNS Model QL-880-S2Magazine Bar Feed3

• LNS Model Quick LoadServo 80 Magazine BarFeed

Mazak Model QTN-20 CNCTurning Center; s/n 120249,Mazatrol Control, 8” Chuck,Turret, Tailstock (3/1996)

• SMW Quick 7.52Hydraulic Bar Feed

CNC ROBOTICWELDING CELLLincoln Fanuc System 35CNC Robotic Welding Cell;s/n E13848272, Lincoln R350Power Supply, Fanuc Arcmate100Ic Robot, Fanuc R030IbControl, (2) 40” x 84 Tables(2014)

CNC LASERS3,500 Watt MitsubishiModel ML-3015-LVP(S)Shuttle Table CNC Laser; s/nLH-16659, Model ML35CFResonator, Model LC20BP2Control, 122” X-Axis, 61” Y-Axis,4.72” Z-Axis (6/2002)

3,500 Watt MitsubishiModel ML-3015-LZP ShuttleTable CNC Laser; s/n6930LVP06, 122” X-Axis, 61” Y-Axis, 3.93” Z-Axis (2000)

DUST COLLECTORS10-HP Torit Model DFT2-8Dust Collector; s/n 3307715-1

7.5-HP Torit Model 2DF6Dust Collector; s/n IG578292-001

CNC PRESS BRAKES176 Ton x 157” Adira ModelQHD-16040 CNC PressBrake; s/n MEI-005584/6721/12395, 157” OALength, 124” Bet. Housings,Cyblec Modeva 10S Control andBack Gage (2006)

77 Ton x 98” Adira ModelQHD-7025 CNC HydraulicPress Brake; s/n 15446-10107,98” Overall Length of Bed, CNCControl and Back Gage (2000)

Press Brake Dies

BAND SAWS14” x 20” DoAll Model500SNC AutomaticHorizontal Band Saw; PLCControl, Bar Feed, 60 Deg.Swivel (2015)

9” x 16” DoAll Model C916Horizontal Band Saw20” DoAll Vertical Band Saw

MISC. FABRICATINGEQUIPMENTHebo Model ML-100 PipeGrinder and Polisher (2013)

50 Ton Geka Hydracrop50A Hydraulic Ironworker(1995)

Pem Series 4 Insterter Press;s/n 5482 (11/2012)

Baliegh Model M250Hydraulic Tube Bender(2012)

150 KVA Peer Model P100-24 Spot Welder

WELDERS ANDRELATED(3) Miller Model 350PWelders(5) Esab Model 353CVWelders w/ Wire FeedsMiller DX Tig WelderMiller Synchrowave 350WelderNelson Stud Welder20 Amp Miller Spot Welder

POWDER COATEQUIPMENT7’ x 12’ x 6’ H Approx.Despatch Model PSC3-66S-1G Drive-In Natural GasBatch Oven; s/n 158743, 500Degree

12’ x 10’ x 6’ H Drive-In /Pass-Thru Bolt TogetherPowder Coat BoothWagner and Parker HandPowder Coat Guns5’ x 10’ Paint Booth

CMM’S ANDINSPECTIONEQUIPMENTRomer Model RA-7535-2Portable Arm CMM w/Granite Table; s/n 2036-UC, 4’x 8’ Granite Table, Laptop, Case,FP2 Mobility Pack

Giddings and Lewis CordaxDiscovery D-28 CMM; s/n P-5089-0900, 36” x 60” Approx.Table Size, Renishaw Probe

Inspection Tools Including13” Mitutoyo Comparator,Height Gages, Calipers, DialIndicators and Related

OVERHEAD BRIDGECRANES AND JIBCRANES5 Ton & 2 Ton x 40’Approx. Span Brehob SingleGirder Top RunningOverhead Bridge Cranes(Late)

• 200’ Long Approx. Rails& Raceway

(4) 1/2 Ton Column Jibs w/Electric Hoists

ENGINE LATHES43” x 15’ American GearedHead Lathe w/ Taper, 43”Over Ways, 37” Over Centers

20” x 60” Romi EZ-Path-IISD Flat Bed CNC EngineLathe (1996)

(2) 17” x 60” ClausingGeared Head Engine Lathes15” x 60” Sharp EngineLathe15” x 54” American Lathew/ Taper12” x 30” Clausing Lathe

MILLING MACHINES4-HP Bridgeport Series IISpecial Vertical Mill3-HP Chevalier VerticalMilling Machine w/ DRO(3) 2-HP Bridgeport VerticalMills w/ DRO1-HP Bridgeport 8-SpeedVertical Mill

MISC. TOOLROOMMACHINERYDC Morrison Keyseater; s/nK97-5222

36” Oil Gear Broach w/Tooling(2) Greaves Dial Type MillsDial Type Vertical MillCustom Hydraulic ShopPress

4-HP BridgeportSeries II SpecialVertical Mill

Flex Arm Free-StandingPneumatic Tapper

DC MorrisonKeyseater

Romer Model RA-7535-2 PortableArm CMM w/Granite Table

10-HP Torit ModelDFT2-8 DustCollector

(2) 17" x 60" Clausing Geared Head Engine Lathes

20" x 60" Romi EZ-Path-IISD Flat Bed CNC EngineLathe

(3) 2-HP Bridgeport Vertical Mills w/ DRO

43" x 15' American Geared Head Lathe w/ Taper

(2) Mazak Model QT Nexus 250-II CNC TurningCenters

(2) Mazak Nexus 510C-II CNC Vertical MachiningCenters

(2) Mazak Model QT Nexus 250-II CNC Turning Centers

NEW2010

NEW AS2013NEW AS

2013

1851382Y CIA Specialty Tool and Machine Co-4 6/19/18 10:21 AM Page 2

SPECIALTY TOOL & MACHINE CO., INC. AND LTS INDUSTRIES, INC.SPECIALTY TOOL & MACHINE CO., INC. AND LTS INDUSTRIES, INC.

MISC. MACHINERY (2) Burr Bench FinishingTubs, (1) Single Tub, (1)Dual TubAnver Vacuum Sheet LifterFlex Arm Free-StandingPneumatic TapperTrinco Blast CabinetApprox. 24” x 36”Flex Arm Pneumatic Tapperw/ HD Steel TableDake Arbor Press

LIFT TRUCKS 5,000 Lb. Yale ModelGLC050 LP Gas Lift Truck;s/n E187V19390Z, 8,200 Hours

4,000 Lb. Yale ModelGLC040 LP Gas Lift Truck

AIR COMPRESSORS25 HP Ingersoll Rand ModelSSR-UP6-125 HorizontalTank Air Compressor; s/nCBV330067

25 HP Horizontal Tank AirCompressorUltra Air Dryer

TRUCKS2006 Ford F450 Flat BedTruck w/ 110,000 Miles2006 Ford F150 Truck w/130,000 Miles

MACHINEACCESSORIES ANDTOOLINGMachine Accessories andTooling; No. 40 Tool Holders,Kurt Vises, 4th Axis Indexers,Indexable Tools, PerishableTooling, Drill Index, Angle Plates,Rotary Table, Collets and Related

SHOP, SUPPORTAND OFFICEEQUIPMENTLate Model, Very CleanShop and SupportEquipment; Dump Hoppers,Pallet Trucks, Racks, Carts, Fans,Ladders, Fireproof Cabinets,Storage Cabinets, ToolingCabinets, Work Benches, SteelTables, Platform Scale, VeryClean Office Furniture andRelated

2006 Ford F450 Flat Bed Truck 5,000 Lb. Yale Model GLC050 LPGas Lift Truck

25 HP Ingersoll Rand ModelSSR-UP6-125 Horizontal TankAir Compressor

50 Ton GekaHydracrop 50AHydraulic Ironworker

Baliegh Model M250Hydraulic Tube Bender

7’ x 12’ x 6’ H Approx. Despatch Model PSC3-66S-1G Drive-In Natural Gas Batch Oven

(10) Late Model Welders By Miller and ESAB

77 Ton x 98” Adira Model QHD-7025 CNC HydraulicPress Brake

14” x 20” DoAll Model 500SNC AutomaticHorizontal Band Saw

3,500 Watt Mitsubishi Model ML-3015-LVP(S) Shuttle Table CNC Laser

5 Ton & 2 Ton x 40' Approx. Span Brehob Single Girder Top Running Overhead Bridge Cranes

WEBCAST BIDDER INSTRUCTIONS➢ Bidders in the United States will receive approval forms from our office upon registering for

the auction on www.bidspotter.com, pending the Auctioneers review of the information pro-vided you will be approved at the Auctioneers discretion.

➢ Bidders outside of the United States must post a deposit ofapprox. 25% of their planned spending budget or $2,500.00minimum with Cincinnati industrial auctioneers in order to beapproved to bid. Those who do not post the deposit will notbe approved. period.

1851382Y CIA Specialty Tool and Machine Co-4 6/19/18 10:21 AM Page 3

FIRST CLASS MAIL!

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

15% ONSITE BUYER’S PREMIUM18% ONLINE BUYER’S PREMIUM

TERMS OF SALEFrom I-264 just east of the airport, exit at No.12 KY-864 South. Go South on KY-864 forapprox. 1 mile to right onto Gilmore Lane.Make and almost immediate left onto GilmoreIndustrial Blvd. and proceed 1/2 mile to deadend at auction site.

DIRECTIONS

WEDNESDAY, JULY 11THWEDNESDAY, JULY 11TH

SPECIALTY TOOL &MACHINE CO., INC. ANDLTS INDUSTRIES, INC.

Although information has been obtained fromsources deemed reliable, the auctioneer makes nowarranty or guarantee, expressed or implied, as tothe accuracy of the information herein contained. It is for this reason that buyers should avail them-selves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions.Please check with the Auctioneer’s Office for a final listing. Items offered may or may not necessarily besold as described and/or photographed in this brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Plant Closed – Ordered Sold by Secured Creditor

SPECIALTY TOOL &MACHINE CO., INC. ANDLTS INDUSTRIES, INC.

3331 Gilmore Industrial Blvd.Louisville, Kentucky 40213South of Downtown, near the airport

Mazak CNC LathesMazak CNC LathesMazak CNC Lathes (2) Mitsubishi Lasers(2) Mitsubishi Lasers(2) Mitsubishi Lasers

Mazak CNC VMC’sMazak CNC VMC’sMazak CNC VMC’s Welding Robot (2014)Welding Robot (2014)Welding Robot (2014)

SPECIALTY TOOL &MACHINE CO., INC. ANDLTS INDUSTRIES, INC.

Plant Closed – Ordered Sold by Secured Creditor

SPECIALTY TOOL &MACHINE CO., INC. ANDLTS INDUSTRIES, INC.

3331 Gilmore Industrial Blvd.Louisville, Kentucky 40213

South of Downtown, near the airport

SALE DATE:Wednesday, July 11th

STARTING: 9:00AMINSPECTION:

Tuesday, July 10th10:00 AM to 4:00 PM

CINCINNATIINDUSTRIALAUCTIONEERS

auctioneers | appraisers | since 1961

Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com

Jeffrey L. Luggen – KY License No. RP 7066Joseph M. Luggen – KY License No. RP 3521

AUCTIONEERS

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | info@cia-auction.com2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

1851382Y CIA Specialty Tool and Machine Co-4 6/19/18 10:21 AM Page 4