Specialty Aluminum Trims and Extrusions Catalog
Transcript of Specialty Aluminum Trims and Extrusions Catalog
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
WELCOME TO EAGLE MOULDINGS Since 1989, Eagle Mouldings strives to offer an extensive inventory, fast turnaround, and friendly customer service. As an aluminum extrusion company our main goal is to meet our customers’ requirements on time, on spec, and within budget. Whether you’re in the market for aluminum corner trim, aluminum Z-bar or clips, aluminum flat bar, aluminum hat channel, stackable aluminum slatwall, aluminum slatwall inserts, slatwall panels, aluminum french cleat, stainless steel corner guards and stainless steel kick plates made to your specifications, we carry a broad selection of high-quality products at fair, competitive rates.
COMPREHENSIVE INVENTORY Our stocked warehouse of extrusions includes a variety of profiles guaranteed to benefit all types of customers, including the general public, architects, project managers, contractors, and engineers. From rectangular aluminum tubing and angles to aluminum edge trim to aluminum z-clip designs, we provide a large, continuously improving inventory. We also offer an excellent selection of aluminum square tubing connec-tors, T-slot aluminum extrusions, C channel aluminum, and aluminum rectangle tube. Whether your project calls for aluminum channels, Z clips, panel clips, panel z clips, aluminum tubing connectors, stainless steel corner guards, or slatwall inserts, Eagle Mouldings has your cus-tom order and stock aluminum extrusions covered.
“Our business is customer satisfaction. Eagle Mouldings was founded in 1989 with the belief that premium products along with outstanding customer service would pass the test of time. Over 30 years later, we still believe our customers’ satisfaction drives the way we do business. Our customers have come to recognize Eagle Mouldings as their single source for custom and hard-to-find aluminum trims and extrusions, fast turn-around, great pricing, and personalized customer service. We would have it no other way.”
Mike Kelly, President
OUR MISSION
2 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
CUSTOM AND HARD-TO-FIND ALUMINUM TRIMS AND EXTRUSIONSEagle Mouldings stocks a huge variety of custom aluminum extrusions with an assortment of anodized finishes. As a trusted aluminum ex-trusion company and provider of custom aluminum extrusions, we also offer additional services in accordance with your exact specifications, needs and budget in mind. Light fabrication services include assembly, brushing, welding, cutting, punching, mechanical finishes and more.
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
MARKETS WE SERVEAs a supplier of aluminum trims and extrusions, Eagle Mouldings provides access to a nationwide network of manufacturers. Eagle Mouldings pools multiple resources to assure we can meet your requirements, delivering the right products, at the right time, and at the right price.
ARCHTECTURAL MILLWORK AWNINGS BOAT, MARINE CLEANROOMS
SOLAR PANEL SPECIALTY VEHICLES STORE FIXTURES, DISPLAYS WALL PANELS, Z CLIPS
CONSTRUCTION, ARCHITECTS CUSTOM & OEM HOT AISLE CONTAINMENT RESTAURANTS, HOSPITALITY
RETRO TRIM, NOSTALGIC 50’S RV, MOTORHOMES, TRAILERS SIGNAGE, EXHIBITS SLATWALL, RETAIL
INDEXAngles ...............................................12-17Awning Profiles ...................................... 64Bar Nosing, Face Nosing ............... 35, 62Boat, Marine Rub Rail & Trim ......... 65-67Channels ...........................................18-27 C Channel, Slide Door Track ........... 26 F Channel ........................................ 27 Hat Channel .............................. 23-25 Nut Channel ............................. 46, 69 U Channel ...................................18-22 Z Channel, Z Bar ............................. 11Corner Guards, Kick Plates .............54-57 Corner Guards, Alum/Stainless. ... 55 Kick Plates, Alum/Stainless ........... 54 Lexan Corner Guards .................56-57 Lexan Wall Guards .......................... 57Coves, Dividers, Out Corners ....38-39, 62 Coves ........................................ 38, 62 Dividers ............................................ 39 In Corners ........................................ 38 Out Corners .........................32-34, 38Custom Extrusions .............................. 6-7
Dock, Decking, Bleacher .................68-71Door Track.............................................. 26Flat Bars, Bar Stock .............................. 41Floor, Carpet, Thresholds, Tile ........ 58-60 Carpet Edge, Flooring, Tile ............. 59 Stair Nosing ..................................... 58 Thresholds ................................ 59, 60Hand Rail, Fencing .................................71Hinge - Continuous ................................ 77J-Caps ............................................... 28-29Ovals, Half Ovals ............................ 40, 67Price Tag Mouldings .............................. 34Retro, Nostalgic 50’s .......................61-63Round Rod, Solid Round Stock ............ 42RV, Motorhome, Trailer ................... 72-73Sheet ...................................................... 78Signage, Exhibits .............................. 74-76Slatwall & Inserts .............................30-31 Interlocking, Stackable Slatwall ..... 30 Slatwall Inserts ................................ 31 Slatwall Cutter Bits.......................... 31
Store Fixture, Display ...................... 32-34 Out Corners .........................33-34, 38 Slide Door Track, C Channel ........... 26Tees, Tee Nosing ..............................36-37 Industrial Tees ................................. 37 Nostalgic 50’s, Retro ............... 36, 62 Tees .................................................. 36 Tees - Barbed Leg ........................... 36Tubing................................................43-47 Rectangle......................................... 47 Round .............................................. 43 Square ....................................... 45-46 Telescoping ......................... 43, 46, 47Tube Framing, Connectors .............. 48-53 ¾” Tube Framing, Connectors ....... 52 1” Tube Framing, Connectors ....48-51 1-1/2” Tube Framing,Connectors ...53Z Clips, Panel Hanger, Z Bars ............8-11 Z Clips ...........................................8-11 Z Clips Continuous Length ..........8-10 Z Bars, Z Channel ........................... 11
3CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
LIGHT FABRICATIONProjects can be demanding, and we offer light fabrication services to help get your project complete. Our services include cutting to custom lengths, drilling or countersinking, deburring, punching, forming, bending, and assembly.
• Cutting to Length • Mitering Corners
• Drilling• Countersinking
• Punching • Welding
• Forming, Bending• Deburring
• Assembly
STOCK ALUMINUM TRIMS & SPECIALTY EXTRUSIONSEagle Mouldings is your trusted source for standard and specialty aluminum trims and extrusions. Our large warehouse of stocked extrusions includes a variety of items guaranteed to benefit all types of customers, including the architects, engineers, general contractors, manufacturing companies, and individuals.
For over 30 years, Eagle Mouldings has been a design, manufacturer and distributor of aluminum trims and extrusions. We have forged invaluable partnerships with industry leaders that enable us to provide our customers with one of the largest selections of standard and specialty aluminum trims and finishes available anywhere. Our commitment is to provide customers with high quality products and service that meets their budgets and schedule.
We ship throughout the nation directly from our centrally located warehouse in Minneapolis, Minnesota. We serve many industries including architectural millwork, store fixtures and displays, wood panel manufacturers, acoustical panel manufacturers, rescue vehicle manufacturers, commercial contractors, OEM manufacturing and more. We have hundreds of shapes and finishes available including:
• Angles• Bar & Face Nosing• Channels• Corner Guards, Kick Plates
• Coves, Dividers, Out Corners• Flat Bar, Round Rod• Hat Channels• J-Caps
• Slatwall & Inserts• Tees• Tubing & Connectors• Z Clips, Z Bars
When Eagle Mouldings takes on a project, your goals become ours. Whether you require custom extrusions or standard aluminum trims, our experience, and personalized customer service as one of the top aluminum extrusion supply companies, will keep you coming back.
4 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
ALUMINUM FINISHESOur anodized aluminum finishes come in several standard finishes as well as customized anodized finishes to help create the exact look you need. Custom aluminum finishes are available in anodized, mechanical, or painted finishes.
• Anodizing• Bead Blasting
• Brushing• Chemical Wash
• Painting• Polishing
• Powder Coating• Straight Lining
STANDARD ANODIZED FINISHES
SPECIAL ORDER ANODIZED FINISHES
Clear Anodize(202R1)
Duranodic #311Light Champagne
Duranodic #311Light Bronze
Duranodic #312Medium Bronze
Duranodic #313Dark Bronze
Duranodic #314Extra Dark Bronze
Duranodic #335Black
30 Minute ClearAnodize (204R1)
60 Minute ClearAnodize (215R1)
301MChampagne
302MGolden Bronze
303MLight Bronze
304MMedium Bronze
305MDark Bronze
306MDeep Bronze
307MElectrolytic Black
201MLight Gold
202MMedium Gold
203MDark Gold
300MNickel
321MBrass
323MSandalwood
361MTurquoise
363MBlue Green
366MJade
351MTomato Red
353MWine
3541MBurgundy
101MSatin Clear
101BBrite Dip
207MBlack Dye
Satin Pewter Brite Pewter Satin Brushed Brushed Brite
BA Buffed, Anodized ClearBD Bright Dipped, Anodized ClearBDG Bright Dipped, Anodized, Gold DippedBK Black AnodizedBKP Powder Coated Black
BR BrushedBZ Bronze AnodizedDK Dark Bronze AnodizedEA Etched, Anodized Clear (Satin Silver)EB Etched, Anodized Gold (Satin Gold)
MFA Anodized Clear over Mill FinishMF Mill Finish or As ExtrudedPOL Polished Bright Mirror-Like Finish
EXTRUSION FINISHES
5CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
CUSTOM DESIGN, CUSTOM DIESEagle Mouldings aims to offer the best prices, best quality, and best lead times in the aluminum extrusion industry. With an average of 6 to 8 week turnaround on brand new shapes and 4 weeks for special order of stocked dies, Eagle is a step ahead of the competition. Needing some-thing faster? Our customer service team understands the importance of your project and we do our best to meet or exceed any expectations our customers have.
CUSTOM EXTRUSIONS, FAST LEAD TIMESFor more than 30 years in the custom aluminum trim and extrusion manufacturing business, Eagle Mouldings has plenty of experience with aluminum extrusions. We are one of the most reliable and respected sources for custom aluminum extrusions serving all government and commercial business sectors. Suitable for everything from factory OEM to Store Fixture, Display and Exhibit manufacturers to Architectural Millwork to RV and Camper to Emergency Vehicle manufacturing to Hot Aisle Containment Extrusions, Eagle Mouldings can provide a solution for you.
If your project demands a custom aluminum extrusion, we will help you engineer and design the perfect die solution for your requirements.Eagle Mouldings is committed to providing two things, the highest quality customer service along with the highest quality custom, OEM and stock aluminum extrusions. Whether your project requires a standard shape, or a custom-designed die, we’re capable of delivering high quality, functional extrusions that meet your tight schedule and budget.
6 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
CUSTOM LENGTHS, FABRICATIONIn addition to offering standard, custom & OEM extrusions, anodized & powder coated finishes, Eagle Mouldings also offers light metal fabrication and assembly services for your extrusions, including:
• Drilling/Countersinking• Welding• Cutting to Length, Mitering• Forming/Bending
• Punching• Deburring• Assembly• Brushing/Straight Lining
CUSTOM ANODIZING, FINISHESEagle Mouldings offers a variety of aluminum finishing services and options allowing you to perfectly customize your project. Aluminum finishes can give your extrusions a chic, professional look not only improving the aesthetics, but also the performance.
Our anodized aluminum finishes come in a variety of anodized aluminum colors. We provide several standard anodized aluminum finishes as well as many other customized anodized aluminum finishes to help create the exact look you need.
CUSTOM ALUMINUM EXTRUSIONSYour custom extrusion isn’t complete until it’s ready for installation. Eagle Mouldings’ custom drilling, punching, and countersinking services allow you to choose your hole size, pattern, and starting location on your custom aluminum extrusion for faster on-the-job application.
You can further customize your aluminum trim piece by having Eagle Mouldings cut to length, miter cut, bend, or form your material to your exact specifications. After cutting, Eagle Mouldings also offers deburring services to create and smooth cut clean edges. Finally, finish off the look of your aluminum extrusion with Eagle Mouldings’ mechanical brushing and polishing offerings or the specialty anodizing and powder coating finishes.
GET A FAST QUOTESend us a drawing of your vision and our customer service staff will help your aluminum extrusion come to life. Contact a representative today for more information at 1-800-888-2044, or email us at [email protected].
CUSTOM PACKAGINGIt’s all in the details. We want to make sure you are receiving the best quality item. Taking an extra precaution of properly packaging the aluminum to protect the finish is just another step Eagle Mouldings handles to ensure quality.
7CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
EAGLE-CLIPTM ALUMINUM Z CLIP HANGING SYSTEMHanging things has never been easier. The Eagle-Clip Z Clips (aluminum z extrusions) are a fast and cost effective method to hang, fasten, and secure any kind of wall panel, acoustical panel, partition, frame, cabinet, sign, mirror or piece of artwork. Our specially engineered Eagle-Clip Z Clips allow for fast mounting and removal. Made from heat treated hardened aluminum and available in 1-1/2” and 2” clips, continuous lengths of 72” and 144” either punched or un-punched, the Eagle-Clip Z Clips make installation fast and easy.
EAGLE Z CLIPS EAM-375 EAM-375-S EAM-62518 EAM-62518-S EAM-62525 EAM-2525
Clip Width: 2.00” 2.00” 1.50” 1.50” 1.50” 2.00”
Continuous/Rail Length: 72”, 144” 72”, 144” 72”, 144” 72”, 144” 72”, 144” 72”, 144”
Lift-Off: .375” .375” .625” .625” .625” .250”
Projection/Stand-Off: .250” .250” .1875” .1875” .250” .250”
Clip Height: 1.25” 1.25” 1.875” 1.875” 1.875” 1.00”
Clip Hole Size: .210” .210” .210” .210” .210” .210”
Aluminum Material: 6005-T6 6005-T6 6005-T6 6005-T6 6005-T6 6063-T6
EAM-375 EAM-375-S EAM-62518 EAM-62518-S EAM-62525 EAM-2525
8 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
HOW EAGLE-CLIP Z CLIPS WORKTo install, simply fasten one Z Clip to the wall and another to the panel you want to hang. The Z shaped clips wedge together locking the panels solidly and securely in place.• Available in pre-cut and punched clip lengths (sold in bags of 20 or buckets of 1000)• Available in punched (every 8″ on center) or un-punched 72” and 144” lengths • Easy to install• Extremely strong• Very secure
AVAILABLE Z CLIP PRODUCTSOur entire line of aluminum Z clips and Z bar stock are engineered and temper-hardened for maximum strength and holding power. Our Z Clip product line consists of the Eagle Z-Clip, cleated bar or cleated rail, smooth bar or smooth rail, and aluminum Z bar. Whether you’re looking for a 3/8″ lift-off, 5/8″ lift-off, 1-1/2″ wide, 2″ wide, 3″ wide, 1/4″ standoff or 3/16″ standoff, cleated or smooth, standard, custom or special order, Eagle Mouldings is ready to help you find the exact solution that fits your need.
CUT INSTALLATION TIME BY AS MUCH AS 50%Eagle-Clip Z Clips remain concealed after installation, allowing for pre-finishing without time-consuming face nailing or on-the-job finishing. Because of the ease of installation and cost-effectiveness, you can save as much as 50% by choosing Eagle-Clip Z Clips and Panel Hanger products.
Features:• .375” lift-off• .250” stand-off• .210 hole size• Continuous lengths are available unpunched or
pre-punched holes every 8” on center• Aluminum Alloy 6005-T6 temper in accordance
with ASTM B221Available Sizes:• 2.00” Eagle-Clip with Grooved back - EAM-375-2• 6’ (72”) continuous length z-bar - EAM-375-6• 12’ (144”) continuous length z-bar - EAM-375-12• Custom sizes and hole locations available
Features:• .375” lift-off• .250” stand-off• .210 hole size• Continuous lengths are available unpunched or
pre-punched holes every 8” on center• Aluminum Alloy 6005-T6 temper in accordance
with ASTM B221Available Sizes:• 2.00” Eagle-Clip with Smooth back - EAM-375-S-2• 6’ (72”) continuous length z-bar - EAM-375-S-6• 12’ (144”) continuous length z-bar - EAM-375-S-12• Custom sizes and hole locations available
1.25”
.625”
.375”
.250”
.115”
.115”
1.00”
.500”
.250”
.250”
.115”
.115”
1.25”
.625”
.375”
.250”
.115”
.115”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.250”
.125”
.125”
1.25”
.625”
.375”
.250”
.115”
.115”
1.00”
.500”
.250”
.250”
.115”
.115”
1.25”
.625”
.375”
.250”
.115”
.115”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.250”
.125”
.125”
EAM-375 EAGLE-CLIP
EAM-375-S (SMOOTH) EAGLE-CLIP
.375” Lift-off .250” Stand-off
.375” Lift-off .250” Stand-off
9CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
Features:• .625” lift-off• .1875” stand-off• .210 hole size• Continuous lengths are available unpunched or
pre-punched holes every 8” on center• Aluminum Alloy 6005-T6 temper in accordance
with ASTM B221Available Sizes:• 1.50” Eagle-Clip with Gooved back - EAM-62518-15• 6’ (72”) continuous length z-bar - EAM-62518-6• 12’ (144”) continuous length z-bar - EAM-62518-12• Custom sizes and hole locations available
EAM-62518 EAGLE-CLIP .625” Lift-off .1875” Stand-off
Features:• .625” lift-off• .1875” stand-off• .210 hole size• Continuous lengths are available unpunched or
pre-punched holes every 8” on center• Aluminum Alloy 6005-T6 temper in accordance
with ASTM B221Available Sizes:• 1.50” Eagle-Clip with Smooth back - EAM-62518-S-15• 6’ (72”) continuous length z-bar - EAM-62518-S-6• 12’ (144”) continuous length z-bar - EAM-62518-S-12• Custom sizes and hole locations available
1.25”
.625”
.375”
.250”
.115”
.115”
1.00”
.500”
.250”
.250”
.115”
.115”
1.25”
.625”
.375”
.250”
.115”
.115”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.250”
.125”
.125”
1.25”
.625”
.375”
.250”
.115”
.115”
1.00”
.500”
.250”
.250”
.115”
.115”
1.25”
.625”
.375”
.250”
.115”
.115”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.250”
.125”
.125”
EAM-62518-S (SMOOTH) EAGLE-CLIP .625” Lift-off .1875” Stand-off
Features:• .625” lift-off• .250” stand-off• .210 hole size• Continuous lengths are available unpunched or
pre-punched holes every 8” on center• Aluminum Alloy 6005-T6 temper in accordance
with ASTM B221Available Sizes:• 1.50” Eagle-Clip with Gooved back - EAM-62525-15• 6’ (72”) continuous length z-bar - EAM-62525-6• 12’ (144”) continuous length z-bar - EAM-62525-12• Custom sizes and hole locations available
1.25”
.625”
.375”
.250”
.115”
.115”
1.00”
.500”
.250”
.250”
.115”
.115”
1.25”
.625”
.375”
.250”
.115”
.115”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.250”
.125”
.125”
EAM-62525 EAGLE-CLIP .625” Lift-off .250” Stand-off
Features:• .250” lift-off• .250” stand-off• .210 hole size• Continuous lengths are available unpunched or
pre-punched holes every 8” on center• Aluminum Alloy 6005-T6 temper in accordance
with ASTM B221Available Sizes:• 2.00” Eagle-Clip with Grooved back - EAM-2525-2• 6’ (72”) continuous length z-bar - EAM-2525-6• 12’ (144”) continuous length z-bar - EAM-2525-12• Custom sizes and hole locations available
1.25”
.625”
.375”
.250”
.115”
.115”
1.00”
.500”
.250”
.250”
.115”
.115”
1.25”
.625”
.375”
.250”
.115”
.115”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.1875”
.09375”
.09375”
1.875”
1.00”
.625”
.250”
.125”
.125”EAM-2525 EAGLE-CLIP
.250” Lift-off .250” Stand-off
10 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
ALUMINUM Z BARS, Z CHANNELS
.21”.065”
.697”.428”
1.125”.328”
.4375”
.50”
.375”
.0625”
1.00”
1.50”
1.50”2.921”
.079”
3.00”
.75”
1.50”2.125”
1.00”
1.50”
1.50”2.910”
.090”
1.00”
1.50”
1.50”3.25”
.250”
1.75”
1.50”
1.50”2.75”
.250”
.125”
1.25”
2.50”
1.50”3.875”
.125”
EAM-3272MF Z-1447
MF, EA
EAM-3323MF
EAM-3760MF
EAM-3837Special Order
EAM-3684MF
EAM-3270MF
Products shown at actual size
EAM-3525Special Order
11CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
B
A
C
.375”
.375”
.0625”.50”
.50”
.0625”
.75”
.75”
.0625”
1.00”
1.00”
.0625”
1.50”
1.50”
.0625”
1.25”
1.25”
.0625”
2.00”
2.00”
.0625”
1/16” (.0625”) THICK ALUMINUM ANGLES, NON-STOCK
ITEM A B C
AN-40 .3125 .3125 .0468
AN-22 .375 .375 .0468
AN-23 .375 .750 .0468
AN-27 .750 .750 .0468
AN-24 .500 .500 .0468
AN-31 1.00 2.00 .0468
AN-62 .375 1.00 .0625
AN-64 .375 1.50 .0625
AN-73 .500 2.00 .0625
AN-77 .625 .625 .0625
AN-89 .8125 .8125 .0625
AN-95 .875 .875 .0625
AN-101 1.00 2.00 .0625
AN-104 1.00 3.00 .0625
AN-105 1.0625 1.0625 .0625
AN-109 1.75 1.75 .0625
1/16” (.0625”) THICK - EQUAL ANGLES
ARCHITECTURAL ALUMINUM ANGLES
A-102MF, EA
A-103MF, BD, BK, BZ, EA
A-803MF, BD, BK, EA
A-903MF, BK, EA
A-1003MF, EA
A-1425MF, BK, EA
A-2419MF, BK, EA
Angles shown at actual size
12 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.75”
.5625”
1.50”
.75”
2.25”
1.00”
1.00”
.25” .0625”
.75”
.50”.0468”
.8125”
.4375”
.5468”
1.50”
3.00”
2.00”
.065”
1.00”
2.50”
1.50”
.313” .0625”.50”
1.00”
.0625”
1.00”
.75”
.0625”
2.25”
.625”
.0625”.0625”
.0625”
.75”
2.25”
.0625”
1.00”
1.50”
.0625”
.0625”.0625”
ARCHITECTURAL ALUMINUM ANGLES1/16” (.0625”) THICK - UNEQUAL ANGLES
E-1225EA
A-141MF, EA
EAM-2672MF, EA
A-904MF, BK, EA
A-1144MF, EA
EAM-3047MF
AN-85MF, EA
AN-86MF, EA
EAM-2313MF
Special Order
EAM-3486MF
EAM-3487MF
A-2281MF, BK, EA
EAM-3151MF
A-326BA, EA
Drilled or Undrilled
A-328EA Drilled or Undrilled
Angles shown at actual size
13CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.50”
.125”.50”
.125”
.75”
.75”
.125”
.875”
.875”
.125”
1.00”
1.00”
1.75”
1.75”
.125”
1.50”
1.50”
.125”
1.25”
1.25”
.125”
2.00”
2.00”
.125”
2.50”
2.50”
.125”
.09375”.375”
.75”
.09375”.50”
1.00”
.875”
1.75”
.109”
3.00”
3.00”
.125”
1/8” (.125”) THICK - EQUAL ANGLES
ARCHITECTURAL ALUMINUM ANGLES Angles shown at actual size
A-104MF, EA
A-1185MF, BK, EA
EAM-3149MF, EA
A-1187MF, BK, EA
A-1164MF, EA
A-1163MF, BK, EA
A-1160Special Order
A-1202MF, EA
A-1148MF
3/32” (.09375”) THICK - UNEQUAL ANGLES 7/64” (.109”) THICK - UNEQUAL ANGLE
E-1750EA
E-1033EA
EAM-2493MF, EA
A-1446MF
14 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.125” .125” .125” .125”
.125”.125”.125”
.125”.125” .125”
.125”
.50”
.375”
1.125”
1.00”
1.50”
1.00”
2.125”
1.00”
.125”
3.00”
1.00”
.875”
2.00”
.125”
1.50”
1.625”
1.375”
1.50”
.75”
2.00”
1.00”
.50”
1.00”
.75”
1.50”
.75”
2.00”
1.00”
.125”
2.875”
1.375”
1.50”
3.00”
.125”
.125”
2.00”
4.00”
1/8” (.125”) THICK - UNEQUAL ANGLES
ARCHITECTURAL ALUMINUM ANGLES
EAM-3140MF, EA
A-1424MF
A-1165MF, BK, EA
E-1035MF
EAM-3148MF, EA
EAM-2686MF, BK, EA
A-1225MF, EA
A-1227MF
E-1249EA
A-1154MF, EA EAM-2719
MF
EAM-2718MF
EAM-2717MF
CHI-342MF, EA
EAM-2716MF
A-2241MF
Angles shown at actual size
15CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
2.00”
3.00”
.1875”
3.00”
3.00”
.1875”
2.00”
2.00”
.1875”
1.50”
1.50”
.1875”
2.00”
4.00”
.1875”
ARCHITECTURAL ALUMINUM ANGLES3/16” (.1875”) THICK - EQUAL ANGLES
3/16” (.1875”) THICK - UNEQUAL ANGLES
A-1229MF
A-1224MF
A-1200MF
E-265MF
A-1379MF
Angles shown at actual size
16 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
4.00”
1.50”
.25”
1.50”
1.50”
.25”
1.75”
1.75”
.25”
2.00”
2.00”
.25”
4.00”
4.00”
.25”
ARCHITECTURAL ALUMINUM ANGLES1/4” (.250”) THICK - EQUAL ANGLES
A-1161MF
EAM-2774Special Order
1/4” (.250”) THICK - UNEQUAL ANGLES
A-1162MF
A-2544(Non-Stock)
A-1203MF
Angles shown at actual size
17CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
ARCHITECTURAL ALUMINUM CHANNELS1/16” (.0625”) WALL THICKNESS
.25”
.0625” .375”
.125”
.38”
.36”
.128”
.255”
.050”.625”
.155”
.3125”
.0625”
.75”
.1875”
.313”
.0625” .50”
.1875”
.375”
.0625” .375”
.25”
.375”
.0625” .4375”
.25”
.375”
.0625”
.25”
.8125”
.375”
.0625”
.25”
.9375”
.50”
.0625”
.375”
.3125”
.50”
.060”
.375”
.50”
.50”
.0937”
.3125”
.50”
.50”
.0625”
.375”
.75”
.625”
.0625”
.50”
.5625”
.625”
.0625”
.50”
.625”
.675”
.0625”
.545”
.655”
.75”
.094”
.5625”
.50”
.070”
1.063”
1.563”
.25”
B-185MF
CHF-236MF, BK, EA
CHI-1234MF, EA
E-1346EA
A-244Special Order
A-252Special Order
CHF-239MF, EA
E-2223EA
A-237MF, EA
E-1285EA
E-2440MF, EA
E-1038EA
E-2726MF, EA
CHF-11602MF, EA
A-762Special Order
EAM-188MF, EA
A-235MF, BK, EA
Channels shown at actual size
S-132MF
18 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.00”
.0625” .50”
.875”
1.00”
.0625”
.75”
.875”
1.00”
.080”
1.50”
.840”
1.125”
.0625”
.75”
1.00”
2.00”
.080”
1.75”
1.84”
.0625”
2.125”
2.00”
.75”.0625”
1.00”
3.125”
3.00”
.75”
.050”
.625”
.75”
.75”
.0625”
.625”
1.25”
.875”
.75”
.0625”
.6875”
.875”
.75”
.0625”
1.00”
.875”
.75”
.0625” .3125”
.781”
.078”
.625”
.6875”
E-1345EA
ARCHITECTURAL ALUMINUM CHANNELS1/16” (.0625”) WALL THICKNESS
CHF-167EA
CHF-134MF, EA
CHI-1112MF, EA
A-741MF, EA
CHI-2134Special Order
EAM-2827MF, EA
EAM-3084Special Order
EAM-2715MF, EA
A-757MF, EA
E-2161EA
E-9747Special Order
A-761MF, BK, EA
Channels shown at actual size
19CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
ARCHITECTURAL ALUMINUM CHANNELS1/16” & 1/8” WALL THICKNESS
1/16” (.0625”) THICK ALUMINUM CHANNELS, NON-STOCK
1/8” (.125”) THICK ALUMINUM CHANNELS, NON-STOCK
ITEM A B C D
CH-770 .25 .42 .36 .050
CH-800 .50 .5625 .61 .050
CH-104 .25 .625 .375 .0625
CH-126 .50 .75 .625 .0625
CH-154 .75 .50 .875 .0625
CH-158 .75 1.125 .875 .0625
CH-161 .8125 .75 .9375 .0625
CH-177 1.00 1.00 1.125 .0625
CH-670 1.00 .300 1.10 .050
CH-181 1.125 .50 1.25 .0625
CH-188 1.25 .3125 1.375 .0625
CH-192 1.375 .625 1.50 .0625
CH-195 1.50 1.00 1.625 .0625
CH-198 1.75 .3125 1.875 .0625
CH-200 1.875 .75 2.00 .0625
CH-830 3.00 1.00 3.125 .050
CH-211 3.125 .53125 3.25 .0625
ITEM A B C D
CH-235 .25 .625 .4375 .09375
CH-242 .8125 .50 1.00 .09375
CH-245 .8125 1.25 1.00 .09375
CH-248 1.0625 1.00 1.25 .09375
CH-451 .125 .50 .375 .125
CH-453 .25 .75 .50 .125
CH-457 .375 .875 .625 .125
CH-459 .50 1.375 .75 .125
CH-461 .625 .9063 .875 .125
CH-463 .75 1.50 1.00 .125
CH-465 .75 2.00 1.00 .125
CH-467 1.00 1.25 1.25 .125
CH-469 1.00 2.625 1.25 .125
CH-471 2.00 .875 2.25 .125
CH-473 1.50 1.75 1.75 .125
CH-475 1.50 2.00 1.75 .125
CH-477 3.75 .50 4.00 .125
CH-479 3.75 1.00 4.00 .125
CH-481 2.00 1.25 2.50 .25
CH-483 2.00 1.50 2.50 .25
E-275 7.625 2.00 8.00 .1875
C
D
A
B B
C
D
A
The channels listed in these charts are a sampling of non-stock aluminum channels available to manufacture. Eagle Mouldings has hundreds of channel dies that can be pro-duced to your specifications. For additional die information, please contact our customer service team.
ALUMINUM ASSOCIATION CHANNELSITEM A B C D RADIUS
A-2051 3.00 1.50 .200 .130 .250
A-1050-4 4.00 2.00 .230 .0938 .250
Special Order 4.00 2.25 .290 .0938 .250
Special Order 5.00 2.25 .260 .0938 .030A
RB
C
D
20 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.75”
.75”
.125”
.50”1.50”
.625”
.125”
.375”
1.50”
.50”
.125”
.25”
.75”
.625”
.125”
.375”
.50”
.50”
.09375”
.3125”
.75”
1.50”
.125”
.50”
.75”
2.25”
.125”
.50”
.75”
.094” .50”
.5625”
1.25”
.094”
1.00”
1.063”
1.00”
.125” .50”
.75”
1.00”
.125”
1.50”
.75”
1.50”
.125”
1.00”
1.25”
1.875”
.125”
1.50”
1.625”
1.00”
.125”
1.00”
.75”
1.00”
.50”
.120”
.26”
.125”
ARCHITECTURAL ALUMINUM CHANNELS
EAM-2807MF, EA
EAM-4034MF
E-1038EA
EAM-2665MF
EAM-4047MF
EAM-2763MF, EA
A-774MF, BK, EA
1/8” (.125”) WALL THICKNESS
A-1007MF, EA
EAM-2436 Special Order
CHF-239MF, EA
A-7136MF, EA
A-1101MF, EA
A-1306Special Order
A-50MF
EAM-3311MF
Channels shown at actual size
21CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
3.00”
2.75”
.50”.125”
3.00”
2.75”
.75”.125”
4.00”
3.75”
.625”.125”
2.00”
1.75”
1.00”
.125”
1.25”
.1875” .75”
.875”
1.094”
.188”1.063”
.719”
1.406”
.188”1.063”
1.03”
2.00”
.25”1.00”
1.50”
1/8” (.125”) WALL THICKNESSARCHITECTURAL ALUMINUM CHANNELS
3/16” (.1875”) WALL THICKNESS
1/4” (.250”) WALL THICKNESS
EAM-2494 Special Order
EAM-3147MF, EA
EAM-2795 Special Order
A-1251MF
A-1914MF
EAM-3194Special Order
EAM-3195Special Order
EAM-3382Special Order
Channels shown at actual size
22 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
COMMON HAT CHANNEL APPLICATIONS• Acoustic tiles/panels and soundproofing• Architectural curtain walls• Commercial construction• Exterior wall cladding• Furring (leveling) walls, ceilings, roofs• Installing fixtures (cabinets, displays, ceilings)• Rainscreen installations• Renovation and remodeling• Wall panel systems• Store fixture and display installations• Wall cladding• Curtain walls
BENEFITS OF ALUMINUM HAT CHANNELS• Lightweight (1/3 the weight of steel)• Protection against fire and moisture• Naturally resists corrosion, will not rust• Resists warping, splitting, mold and mildew• Easy to customize• Simple installation• Affordable, budget-friendly
2.75”
.875”
1.25”
.060”
.75” .75”
1.063”
1.25”
2.75”
.75” .75”
.063”
5.00”1.840”1.840”
1.00”
1.25”
1.320”
.090”
1.25”
2.75”
1.50”.060”
.75” .75”
EAM-3571MF
EAM-3790MF
EAM-3330MF
Hat Channels shown at actual size
ALUMINUM HAT CHANNELSHat channels are framing pieces shaped like a top hat. Because aluminum outperforms traditional hat channel materials like wood and steel, Eagle Mouldings specializes exclusively in aluminum hat channels. Eagle’s aluminum hat channels and furring channels are corrosion resis-tant and a fireproof extruded aluminum product. Furring channels and hat channels are used primarily to level out irregular or uneven surfaces on interior walls, exterior walls, ceilings, and masonry, saving a lot of time and unnecessary expense. Other names referred to hat channels are a furring channel, furring strip, hat track, or hat channel extrusion.
EAM-3572MF
23CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
4.00”1.50”1.50”
.250”
1.50”
1.00”
1.50”
3.32”1.00”1.00”
1.00”.090”
1.50”
3.384”1.00”1.00”
.750”.058”
3.00”.75”.75”
.875”
1.75”
.125”
4.00”1.50”1.50”
.250”
1.50”
1.75”
4.00”1.125”1.125”
1.00”
2.00”
.125”
1.25”
2.75”
1.50” .1875”
R .015”
.75” .75”
3.75”1.00”1.00”
.125”
2.00”
R .125” .50”
R .062”
EAM-3683MF
EAM-3836Special Order
EAM-2994MF
EAM-2884MF
EAM-2986MF
EAM-18780MF
ALUMINUM HAT CHANNELS
EAM-3609MF
Hat Channels shown at actual size
E-5383MF
24 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
2.125”
1.75”
.1875”
1.875”
R .375”
2.438”
2.25”
3.00”
2.00”.094”
1.25”.125”
3.25”
5.25”1.125”1.125”
5.438”1.594”1.594”
5.00”1.625”1.625”
R .250”
.1875”
2.125”
1.75”
1.75”
4.00”1.125”1.125”
ALUMINUM HAT CHANNELS
EAM-3142MF
EAM-2398MF
EAM-3761MF
EAM-3292MF
Hat Channels shown at actual size
25CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.185”1.030”.120”
1.27”
.050”
.608”
.342”
.275”
.188” .454”
.059” .276”
.59”.335”
1.26”
.875”
.090”
.375”.25”
.695”.25” .437”
.4375”
1.50”
.090”
.75”.375”
.550”.8125”
.5625”.300”
1.125” 1.1875”
1.125”
.312”
.50”
1.1875”
.50”
.312”
SLIDING DOOR TRACK
.185”1.030”.120”
1.27”
.050”
.608”
.342”
.275”
.188” .454”
.059” .276”
.59”.335”
1.26”
.875”
.090”
.375”.25”
.695”.25” .437”
.4375”
1.50”
.090”
.75”.375”
.550”.8125”
.5625”.300”
1.125” 1.1875”
1.125”
.312”
.50”
1.1875”
.50”
.312”
SLIDE TRACK - CHANNELS
S-1-TOPMF
1/4” MaterialE-7355
EA1/2” Material
E-7356EA
1/2” Material
S-1-BOTMF
1/4” Material
EAM-3279Special Order
EAM-2925MF
EAM-2643MF
EAM-3433MF
EAM-2420MF
Channels shown at actual size
“C” CHANNELS
26 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.535”
1.07”
.30”
.36”
.424”
.57”
.30”
.335”
.432”
1.00”
.305”
.625”Corner Key
MachineScrews
.75”
.75”
.265”
.265”
.063”
.944”
.472”
.354”
.354”
.118”
1.25”
.75”
.3875”
.6875”
.0625”
.75 ”
.600”
.170”
.063”
.656”
.356”
.280”
.0625”
1.188”
.563”
.255”
.050”
1.00”
.50”
.265”
.063”
1.50”
.265”
1.00”
.080”
1.50”
.265”
1.50”
.085”
E-7342EA
EAM-3377MF
E-8642BD, EA
E-11224EA
E-11224-KEYCorner Key
EAM-666MF, EA
.059” Screw Port
EAM-600MF, BK, EA
.147” Screw Port
EAM-3108MF
EAM-2860MF, EA
EAM-3625MF
F TRACK CHANNELS, CHANNELS
E-6457Special Order
S-107MF
S-106MF
Extrusions shown at actual size
27CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.75”
.35”
.080”
.172”
.625”
.1875”
.0625”
.186”
.6875”
.25”
.0625”
.170”
.719”
.1875”
.0625”
.178”
.6875”
.1875”
.09375”
.215”
.7968”
.375”
.156”
.256”
1.00”
.40”
.135”
.235”
1.25”
.450”
.1325”
.3125”
.75”
.259”
.135”
.236”
.75”
.25”
.125”
.228”
.6875”
.25”
.09375”
.215”
.8437”
.375”
.1875”
.297”
.75”
.259”
.26”
.362”
.75”
.375”
.25”
.375”
.875”
.3125”
.25”
.350”
.27”
1.00”
.400”
.370”
.725”
.319”
.097”
.215”
ARCHITECTURAL J CAPS & DRIP CAPS
E-80MFA
1/16” Material, Undrilled
E-83MFA
3/32” Material, Undrilled
E-82MFA, BK
3/32” Material, Undrilled
E-901MFA
1/8” Material, Punched & Slotted
E-524MF, BK, EA
1/8” Material, Punched & Slotted
E-105EA
1/8” Material, Undrilled
E-104BA, EA
5/32” Material, Undrilled
E-84MFA, EA
1/16” Material, Undrilled
E-514MF, EA
1/16” Material, Punched & Slotted
E-514-LMF, BK, EA
1/16” Material, Punched & Slotted
EAM-310MF, BK, EA
1/16” Material, Undrilled
E-72BA
3/16” Material, Undrilled
E-544MF, BK, EA
1/4” Material, Punched & Slotted
E-401MF, BA, EA
1/4” Material, Punched & Slotted
E-403EA
1/4” Material,Undrilled
EAM-3393Special Order1/4” Material
EAM-2327Special Order 1/8” Material,
Undrilled
J Caps shown at actual size
28 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
ARCHITECTURAL J CAPS & DRIP CAPS
.75”
.375”
.516”
1.00”
.375”
.50”
.664”
1.25”
.50”
.75”
.895”
1.25”
.75”
1.063”
1.20”
1.00”
.312”
1.055”
.875”
.875”
1.625”
.25”
.187”
.75”
.125”
1.125”
.0625”
2.50”
.50”
.50”
1.266”
1.426”
.080”
.448”
.3125”
.875”
.375”
.420”
.340”
.875”
.375”
.527”
.375”
.875”
.375”
.350”
.27”
1.125”
.625”
1.00”
.625”
1.75”
1.94”
.080”
1.50”
.50”
.650”
.50”
.075”
.090”
.390”
.906”
.4375”
.495”
E-400BD, EA
Undrilled, Flat Back for Tape Application
E-1998MF, EA
For 1/2” Material, Undrilled
E-146MF
For 1-3/4” Material, Undrilled
EAM-2207MF, EA
For 3/4” Material
EAM-2725MF
Undrilled
EAM-2627 MF, EA
For 1/2” Material, Undrilled
EAM-2231 MF
Undrilled
EAM-2560MF, EA
For 3/4” Material, Undrilled
E-494MF
For 1” Material, Undrilled
E-1584MF, BK, EA
1/4” Material, Punched & Slotted
E-402BA
5/16” Material, Undrilled
E-814MF, EA
11/32” Material, Punched & Slotted
E-2465BD
3/8” Material, Undrilled
E-5240BA
3/8” Material, Undrilled
J Caps shown at actual size
29CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
E-7584MF, EA
150” LengthsDouble Sided Slatwall
EAM-3652MF
144” Lengths
EAM-3653MF
144” Lengths
5.602”
5.188”1.037”
Center to
Center
.067”
4.934”
1.535”Center
to Center
.055”
.495”
5.356”
5.00”
1.00”Center
to Center
.062”
.563” .534”
ALUMINUM STACKABLE SLATWALLAluminum Stackable Slatwall, designed to interlock or stack on one another for an easy wall storage solution.Available in Mill Finish (MF). Other finishes such as anodized color or powder coating available.
30 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.294”
1.335” 1.275”
1.257”
.490”
.406”.599”
.332”.240”.046”
.542”.305”
.235”.045”.325”
.542”.520”
.492”
.232”
.36”1.083”
.040”
.538”
.320”
.218”.439”
.045”
.379”
.309”
.230”
ALUMINUM SLATWALL INSERTS
SLATWALL CUTTER BITS
SW-17351For EAM-17351Slatwall Insert
SW-5384 For E-5384
Slatwall Insert
SW-138For E-138
Slatwall Insert
SW-182For E-182
Slatwall Insert
E-182MF, BK
96” Lengths
EAM-17351MF
96” Lengths
E-5384MF, BK
96” Lengths
E-138MF, BK
96” Lengths
Use with Cutter BitSW-5384
Use with Cutter BitSW-138
Use with Cutter BitSW-182
Use with Cutter BitSW-17351
31CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.50”.75”
.25”
.75”1.75”
1.50”
.750”
.750”
.434”
.25”
1.50”
.765”
.325”
.750”.25”
1.50”
.75”
.50”
R .500”
1.25”
.75”
2.00”
.75”
.434”
1.775”
.80”
.290”
1.50”.75”
.25”
.75”1.75”
1.50”
.750”
.750”
.434”
.25”
1.50”
.765”
.325”
.750”.25”
1.50”
.75”
.50”
R .500”
1.25”
.75”
2.00”
.75”
.434”
1.775”
.80”
.290”
1.50”.75”
.25”
.75”1.75”
1.50”
.750”
.750”
.434”
.25”
1.50”
.765”
.325”
.750”.25”
1.50”
.75”
.50”
R .500”
1.25”
.75”
2.00”
.75”
.434”
1.775”
.80”
.290”
1.50”.75”
.25”
.75”1.75”
1.50”
.750”
.750”
.434”
.25”
1.50”
.765”
.325”
.750”.25”
1.50”
.75”
.50”
R .500”
1.25”
.75”
2.00”
.75”
.434”
1.775”
.80”
.290”
1.50”.75”
.25”
.75”1.75”
1.50”
.750”
.750”
.434”
.25”
1.50”
.765”
.325”
.750”.25”
1.50”
.75”
.50”
R .500”
1.25”
.75”
2.00”
.75”
.434”
1.775”
.80”
.290”
1.50”.75”
.25”
.75”1.75”
1.50”
.750”
.750”
.434”
.25”
1.50”
.765”
.325”
.750”.25”
1.50”
.75”
.50”
R .500”
1.25”
.75”
2.00”
.75”
.434”
1.775”
.80”
.290”
STORE FIXTURE & DISPLAY
E-5116EA
12’ x 90 Degree CornerFor 3/4” Material
E-5163EA
12’ x 90 Degree CornerFor 3/4” Material
E-5172EA
12’ x 90 Degree Base CornerFor 3/4” Material
E-5272EA
12’ x 90 Degree CornerFor 3/4” Material
E-5265EA
12’ x 90 Degree CornerFor 3/4” Material
E-5339EA
12’ x 60 Degree Triangle CornerFor 3/4” Material
32 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
STORE FIXTURE & DISPLAY
E-5165EA
12’ Shelf Face CapFor 3/4” Material, recommended use
with dovetail cutter
E-5293EA
12’ Radius End CapFor 3/4” Material
E-5393EA
12’ Joint Divider FastenerFor 3/4” Material
E-5436EA
12’ x 120 Degree CornerFor 3/4” Material
E-5162EA
12’ x 135 Degree CornerFor 3/4” Material
CW Systems Cutter BitFixture Cutter
5 Piece Cutter Head Assembly1 interchangeable cutter for 1/2” radius included.
1-1/4” arbor for shaper application. Weight 5 lbs. per unit
.575”
.500”
.156”
.156”
.812”
.500”
.500”.812”
1.50”
1.00”
.75”
2.75”
1.75”
.25”
1.411”.911”
.161”
.765”
1.25”
.765”
.750”
.125
.575”
.500”
.156”
.156”
.812”
.500”
.500”.812”
1.50”
1.00”
.75”
2.75”
1.75”
.25”
1.411”.911”
.161”
.765”
1.25”
.765”
.750”
.125
.575”
.500”
.156”
.156”
.812”
.500”
.500”.812”
1.50”
1.00”
.75”
2.75”
1.75”
.25”
1.411”.911”
.161”
.765”
1.25”
.765”
.750”
.125
.575”
.500”
.156”
.156”
.812”
.500”
.500”.812”
1.50”
1.00”
.75”
2.75”
1.75”
.25”
1.411”.911”
.161”
.765”
1.25”
.765”
.750”
.125
.575”
.500”
.156”
.156”
.812”
.500”
.500”.812”
1.50”
1.00”
.75”
2.75”
1.75”
.25”
1.411”.911”
.161”
.765”
1.25”
.765”
.750”
.125
33CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.75”
2.313”
.25” .25”
.125”
1.625”.875”
.75”1.125”
.25”
.125”
.944”
.472”
.354”
.354”
.118”.472”
.827”
.354”
.118”
.827”
.827”
.354”
.118”
EAM-2208MF, EA
90 Degree Out Corner
.75”
2.313”
.25” .25”
.125”
1.625”.875”
.75”1.125”
.25”
.125”
.944”
.472”
.354”
.354”
.118”.472”
.827”
.354”
.118”
.827”
.827”
.354”
.118”
STORE FIXTURE & DISPLAY
EAM-3108MF, EA
EAM-3109MF, EA
EAM-3110MF, EA
EAM-2207MF, EA
90 Degree Out Corner, J Cap,In Corner, Top Cap,
Bottom Cap
.75”
2.313”
.25” .25”
.125”
1.625”.875”
.75”1.125”
.25”
.125”
.944”
.472”
.354”
.354”
.118”.472”
.827”
.354”
.118”
.827”
.827”
.354”
.118”
A-175EA
Undrilled, 1-1/4” Price Tag
E-3569BA
Drilled, 1-1/4” Price Tag
PRICE TAG MOULDINGS
1.1875”
.25”
1.1875”
.25”
34 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.50”
.5468”
.8125”
.4375”
1.00”
.25”
.875”
.25”
2.00”
.265”
.50”
.25”
.625”
.234”
.75”
.234”
.8125”
.234”
.875”
.234”
1.0625”
.234”
1.25”
.234”
1.50”
.237”
1.625”
.234”
FACE NOSING & BAR NOSING
A-328EA
Drilled, Undrilled
A-326BA, EA
Drilled, Undrilled
A-272BA, EA Drilled
EAM-273BD, EA Drilled
A-275BA Drilled,
EA Drilled, Undrilled
A-274EA
Drilled, Undrilled
E-428MF, BD, EA
Undrilled
EAM-427BA, EA
E-24BA
Drilled
E-25BA
Drilled
E-021EA
Drilled, Undrilled
A-141MF, EA
E-031BD
Drilled, Undrilled
A-219BD
Undrilled
Face Nosings shown at actual size
35CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.50”
.270”
.8125”
.40”
1.25”
.40”
1.25”
.35”
1.50”
.30”
.8125”
.50”1.25”
.625”
.42”
2.00”
.40”
2.25”
.42”
1.50”
.42”
.625”
.75”
.75”
1.00”
.53” .42”
.485”
.715”
.313”
.090”.472”
.827”
.75”
1.25”
.354”
.118” .0625”
TEES - DECORATIVE
FLUTED TEES - FRICTION FIT
SMOOTH TEES - FRICTION FIT Other sizes available by Special Order
E-6030BD, EA
E-7364BD, EA
13/16” Face EAM-900BD, EA
1-1/4” FaceE-625BD, EA
1-1/2” Face BST-214BD
2-1/4” Face
E-88BD
2” Face
E-923BD, EA EAM-442
MF, BD, EAEAM-114
EA E-3898MF, BD, EA
E-365BD, EA
A-304EA
EAM-2229MF
EAM-3110MF, EA
E-11177MF, EA
STRAIGHT LEG TEES
Tees shown at actual size
3 WING CUTTER ASSEMBLYCutter-bearing assembly with 3 wing, .080” x 1/4” shank
SL080-3A2
36 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.00”
1.50”
.0625”
1.00”
1.50”
.125”
1.25”
1.00”
.250”
.875”
2.00”
.125”
2.25”
4.25”
.25”
4.00”
4.00”
.375”
1.625”
.875”
.125”
3.00”
3.00”
.1875”
1.25”
2.50”
.25”
1.00” 1.25”
TEES - INDUSTRIAL
EAM-2631MF, EA
EAM-2495MF
EAM-2409MF, EA
EAM-3150MF, EA
EAM-2199Special Order
EAM-2176Special Order
EAM-2537Special Order
A-2034MF
EAM-3527MF
Tees shown at actual size
37CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.25”
.218”
.6875”
.0625”
.375”
.531”
.625”
.875”
.625”
.0625”.3125”
.1875”
.563”
.787”
.875”
.875”
.09375”
.75”
.09375”.379”
.25”
.25”.050”
.135”
.1568”
.8125”
.4375”
.0625”
.875”
.3125”
.3125”
.0625”
.75”
.75”
.265”
.265”
.063”
1.188”
.563”
.255”
.050”
1.00”
.50”
.265”
.063”
FullRadius
.944”
.472”
.354”
.354”
.118”
1.25”
.75”
.3875”
.6875”
.063”
.656”
.356”
.280”
.0625”
.75 ”
.600”
.170”
.0625”
.719”
.09375”
.625”
.25”
1.00”
.50”1.187”
FullRadius
COVES, IN CORNERS
OUT CORNERS
E-91MFA
1/16” Material
E-421BD, EA
Undrilled
EAM-11771EA
E-93BA
1/16” Material
E-4523/32” Material, Special Order
E-6941/4” Material, Special Order
A-603EA
1/2” Material
E-7342EA
EAM-3377MF
E-8642BD, EA
EAM-3108MF
EAM-2860MF, EA
EAM-3625MF
E-1075/32” Material, Special Order
E-6457Special Order
E-221BD, EA
Drilled & Undrilled(Drilled on long leg)
E-510BD, EA
Drilled & Undrilled(Drill hole is not centered)
E-4533/32” Material, Special Order
E-98MFA
1/16” Material
E-85MFA
3/32” Material
Corners shown at actual size
38 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.3125”
.0625”
1.00”
.625”
.125”
1.25”
.425”
.09375”
1.00”
.50”
.135”
1.375”
.515”
.156”
1.2187”
.50”
.25”
1.375”
.625”
.519”
1.375”
.625”
.769”
1.375”
1.48”
.769”
1.48”
.057”
1.375”
.19”.30”
.20”
.090”
2.00”
3.50”
.563”1.705”
1.563”
1.063”
.25”
2.50”
.265”
1.50”
.090”
1.50”
.265”
1.50”
.090”
DIVIDERS
E-94BA
1/16” Material
E-103BA
5/32” Material
EAM-2558MF, EA
1/2” Material
S-113MF
3/16” Material
EAM-2721 1/2” MaterialSpecial Order
S-131MF
1/4” Material
EAM-2559MF, EA
3/4” Material
EAM-17110EA, MF
3/4” Material
E-303BA, EA, MF1/4” Material
E-110EA
3/32” Material
E-4503/32” MaterialSpecial Order
E-302EA
1/8” Material
S-132MF
Hanging Retainer, 1/4” Material
S-130MF
Hanging Retainer, 1/4” Material
Dividers shown at actual size
39CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
OVALS & HALF OVALS
ALUMINUM OVALS
STAINLESS STEEL OVALS
CONCAVE BACK HALF OVALS
Highly polished stainless steel type 304
SOLID BACK HALF OVALS
.75”1.00”
1.25”
.125”
.75”
.062”
.75”
.075”
1.00”
.075”
1.25”
.075”
.4375” .50”
.1875”
.75”
.1875”
1.00”
.1875”
2.00”
.25”
.188”
.250”
.375”
E-1937BA
Drilled
E-1010BA
Drilled
E-1666BA
Drilled
E-4490MF, EA
Undrilled
SS-114Drilled,
Undrilled available on request
SS-100Drilled,
Undrilled available on request
SS-340Drilled,
Undrilled available on request
SS-340-LDrilled,
Undrilled available on request
SS-340-SBDrilled #10 hole,
Undrilled available on request
SS-100-SBDrilled #12 hole,
Undrilled available on request
SS-114-SBSpecial Order
Drilled #12 hole
A-180BD Drilled EA Drilled MF Drilled
Ovals shown at actual size
40 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
6.00”
4.00”
3.00”
2.50”2.25”
2.00”
1.50”1.25”
1.00”
.375”.500”
.750” .750”
Full Radius
.250”
Full Radius
2.00”
.1875” .250”.375” .500”
1.50”1.25”
1.00”.750”
.125”.125”
.125” .125”
.125”
.125”
.125”
.125”
.125”
.125”
.125”
.125”
.250”
.0625”
.500”
.0625”
.750”
.0625”
1.00”
.0625”
1.25”
.0625”
.125”
2.00”
.0625”ALUMINUM FLAT BAR, BAR STOCK
ITEM A B
A-895 .1875 1.00
A-888 .1875 1.50
A-868 .1875 2.00
A-882 .1875 2.50
A-821 .1875 3.00
A-894 .1875 3.50
A-3164 .1875 4.00
FB-1414 .250 .250
A-891 .250 .500
A-892 .250 .625
FB-1434 .250 .750
A-896 .250 1.00
A-1311 .250 1.25
A-889 .250 1.50
A-17 .250 2.00
A-1371 .250 2.25
A-1369 .250 2.50
A-890 .250 3.00
A-856 .250 4.00
A-916 .250 5.00
A-887 .250 6.00
A-148 .250 8.00
A-1372 .250 9.00
FLAT BAR - .1875” & .250”
ITEM A B
A-785 .375 1.00
A-919 .375 1.25
A-791 .375 1.50
A-1239 .375 2.00
A-910 .375 6.00
A-1450 .375 8.00
A-1232 .500 .500
A-893 .500 1.00
A-864 .500 1.50
A-806 .500 2.00
A-809 .500 3.00
A-1278 .500 4.00
A-1257 .500 6.00
A-564 .500 8.00
A-2376 .625 .750
A-1240 .750 .750
A-1443 1.00 1.00
FLAT BAR - .375” TO 1.00”
AR-17MF,EA
A-808MF,BK,EA
A-795MF, EA
A-796MF, EA
A-810MF, EA
A-2584MF
A-920MF, EA
A-857MF, EA
A-825MF, EA
A-1260MF
A-656MF, EA
A-811MF,BK,EA
A-812MF,BK,EA
AR-812MF,BK,EA
A-10MF, EA
A-11MF, EA
A-12BK, EA
A-13EA
A-14MF, EA
Flat Bar shown at actual size
FLAT BAR - .125
FLAT BAR - .0625
EAM-3535MF
41CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.1875” .250”.375” .500”
1.50”1.25”
1.00”.750”
ALUMINUM ROUND ROD, SOLID ROUND STOCK
ITEM A
A-1330 .1875
A-1333 .250
A-1335 .375
A-1337 .500
A-1341 .750
A-1345 1.00
A-1349 1.25
A-1353 1.50
A-1330MF
A-1333MF
A-1335MF, EA
A-1337MF
A-1341MF
A-1345MF
A-1349MF
A-1353MF
ROUND ROD
Rod shown at actual size
42 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
A B.375” .058”
.75” .125”.75” .125”
2.00” .065”
1.00” .075”
A-1484
1.00 x .1251.315 x .1331.66 x .1402.00 x .1252.375 x .154
SP-40-100SP-40-125
A-1489SP-40-200
.50” .065”
.75” .050”
.875” .049” 1.00” .050”
ALUMINUM ROUND TUBING
TELESCOPINGROUND TUBING
DIE # A B
E-1811 .375 .058
A -1459 .375 .065
A-1460 .500 .065
A-1465-5 .750 .050
A-1465-6 .750 .065
A-12458 .750 .125
A-1462-5 .875 .049
A-1463 1.00 .050
A-1264 1.00 .075
A-1265 1.00 .080
A-1484 1.00 .125
A-1019 1.25 .125
SP-40-100 1.315 .133
A-1487 1.50 .125
SP-40-125 1.66 .140
EAM-2657 1.992 .130
SP-40-150 1.90 .145
E-8165 2.00 .065
A-1489 2.00 .125
SP-40-200 2.375 .154
A-1921 2.50 .188
A-1922 3.00 .125
SP-40-300 3.50 .216
SP-40-400 4.50 .237
ROUND TUBING
TELESCOPING ROUND TUBING
DIE # A B
A-1484 1.00 .125
SP-40-100 1.315 .133
SP-40-125 1.66 .140
A-1489 2.00 .125
SP-40-200 2.375 .154
E-1811MF
A-1264MF
A-1460MF
A-1465-5MF
A-1462-5MF
A-1463MF, BK, EA
E-8165EA
A-12458MF
Tubing shown at actual size
43CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.50”
.50”
.050”.50”
.50”
.080”
R .047”
.75”
.75”
.0625”
R .093”
.75”
.75”
.065”
R .125”
1.00”
1.00”
.0625”
R .125”
1.00”
1.00”
.090”
R .109”
1.00”
1.00”
.125”
R .125”
A
B
C
RadiusALUMINUM SQUARE TUBING
ALUMINUM SQUARE TUBING
ITEM A & B C OUTSIDERADIUS
E-1350 .50 .050 0
E-8097 .50 .080 .047
E-8771 .75 .0625 .093
AR-1475 .75 .065 .125
E-9215 1.00 .0625 .125
E-16908 1.00 .090 .109
AR-1474 1.00 .125 .125
E-13910 1.25 .0625 .125
AR-045 1.25 .090 .125
AR-1481 1.25 .125 .125
E-8969 1.50 .0625 .093
AR-1438 1.50 .125 .125
AR-1440 1.50 .250 .125
AR-535 1.563 .125 .125
AR-7034 1.75 .125 .125
EAM-2730 2.00 .065 .090
EAM-3044 2.00 .085 .090
AR-7024 2.00 .125 .125
AR-49 2.313 .125 .125
AR-7015 2.50 .188 .125
AR-052 2.625 .125 .125
AR-7033 3.00 .125 .125
AR-1414 3.00 .188 .125
AR-055 3.43 .188 .125
A-7044 4.00 .125 0
AR-7048 4.00 .250 .187
E-1350MF, BK, EA
E-8097MF
E-8771MF
E-9215MF, BK, EA
E-16908MF
AR-1474MF
AR-1475MF, BK, EA
Tubing shown at actual size
44 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.25”
1.25”
.0625”
R .125”
1.25”
1.25”
.090”
R .125”
1.25”
1.25”
.125”
R .125”
1.50”
1.50”
.0625”
R .093”
1.50”
1.50”
.125”
R .125”
2.00”
2.00”
.065”
R .090”
2.00”
2.00”
.085”
R .090”
2.00”
2.00”
R .125”
.125”
E-13910MF
AR-045MF
AR-1481MF
E-8969MF
AR-1438MF
AR-7024MF, BK, EA
EAM-3044MF
EAM-2730MF
ALUMINUM SQUARE TUBINGTubing shown at actual size
45CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
A
B
C
Radius
AR-7048
AR-055AR-7033AR-052AR-49
AR-7024
A-1480AR-535AR-045E-16908
1.00 x 1.00 x .0901.25 x 1.25 x .090 wall
1.563 x 1.563 x .125 wall
2.00 x 2.00 x .188 wall
2.00 x 2.00 x .125 wall2.313 x 2.313 x .125 wall2.625 x 2.625 x .125 wall
3.00 x 3.00 x .125 wall
3.47 x 3.47 x .188 wall
4.00 x 4.00 x .250 wall
AR-953 Nut Channel
2.313” x 2.313”
AR-7024Square Tubing
2” x 2”
1/2” Set Screw
1/2”Hex Nut
2.313”
.125”
.875”
.500”
2.313”
ITEM A & B C OUTSIDERADIUS
E-16908 1.00 .09 .109
AR-045 1.25 .09 .125
AR-1440 1.50 .250 .125
AR-535 1.563 .125 .125
AR-7034 1.75 .125 .125
A-1480 2.00 .188 .060
AR-7024 2.00 .125 .125
AR-49 2.313 .125 .125
AR-7015 2.50 .188 .125
AR-052 2.625 .125 .125
AR-7033 3.00 .125 .125
AR-1414 3.00 .188 .125
AR-055 3.43 .188 .125
A-7044 4.00 .125 0
AR-7048 4.00 .250 .187
TELESCOPING ALUMINUM SQUARE TUBING
TELESCOPING SQUARE TUBING
Tubing shown at actual size
ALUMINUM TUBE -SQUARE NUT CHANNELAR-953 square nut channel and AR-7024 insert tubing is a very popular system for adjustable posts on docks.
46 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
A
B
C
Radius
1.00”
2.50”
.746
1.595”
1.50”
2.00”
.065”
.065”
.125”
R .125”
T1-027T2-145T3-031T4-536
1.125 x 1.625 x .125 wall
1.457 x 1.937 x .125 wall1.75 x 2.25 x .125 wall
2.06 x 2.563 x .125 wall
ALUMINUM RECTANGLE TUBING
RECTANGLE TUBING
ITEM A B C OUTSIDERADIUS
A-1348 .750 1.59 .125 0
AR-7035 1.00 1.50 .125 .060
E-9349 1.00 2.00 .083 .098
AR-1476 1.00 2.00 .090 .120
AR-7045 1.00 2.00 .125 .060
AR-026 1.00 2.50 .065 .125
AR-1915 1.00 3.00 .125 .250
EAM-2691 1.50 2.00 .062 0
AR-1408 1.50 2.00 .125 .125
AR-030 1.50 3.50 .125 .060
A-7037 2.00 3.00 .125 0
AR-7037 2.00 3.00 .125 .125
AR-7055 2.00 4.00 .125 .125
AR-7057 2.00 4.00 .188 .125
AR-088 2.00 4.00 .250 .125
A-7050 2.00 5.00 .125 0
A-7060 2.00 6.00 .125 0
A-7016 3.00 6.00 .125 0
A-7046 4.00 6.00 .250 0
Additional tubing not shown can be manufactured to your specifications. Available finishing includes anodizing, powder coatings, and painting.
TELESCOPIC RECTANGLE TUBING
ITEM A B C OUTSIDERADIUS
T1-027 1.125 1.625 .125 .187
T2-145 1.457 1.937 .125 .125
T3-031 1.75 2.25 .125 .125
T4-536 2.06 2.563 .125 .125
A-1348MF
AR-026MF
EAM-2691MF
Tubing shown at actual size
47CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.00”
1.00”
.0625”
R .125”
.50”
.25”
.25”
.325” 1.00”
1.00”.50”
R .125”
.218
.326”
.326”
1.00” .50”
1.00”
R .125”
.260”
.143”
.468”
1.00” .375”
1.00”
R .125”
.750”
1.00” .375”
1.00”
R .250”
R .063”
.130”
.375”
.560”
1.00” .625”
1.00”
R .125”
1.00”
.375”
.560”
1.00” .625”.625”
R .125” R .125”
1.00”
.625”
.375”
.560”
1.00” .625”
.260”.260”
.143”
.468”
1.00” .375”.375”
1.00”
R .125” R .125”.375”
.260”
.143”
.468”
1.00” .375”
1.00”
.260”
1” SQUARE ALUMINUM TUBE FRAMING
E-9215MF, BK, EA
E-62198EA
E-11141EA
EAM-2265EA
EAM-3528EA
E-62200EA
E-11310EA
E-61970EA
E-62199EA
E-62046EA
Tubing shown at actual size
48 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1” NYLON CONNECTORS - ALUMINUM TUBE FRAMING
52112-Way 90
56816-Way
5101End Cap
52AJSTAdjustable
2-Way
52AJS22Adjustable 2-Way Locking in
15 Degree Increments
52AJS33Adjustable
3-Way
52AJS34Adjustable
3-Way
52AJS31Adjustable 2-Way In-Line
Straight Base
52AJS32Adjustable 2-Way Tee
Style
5101-CPCaster Plug
5323Tee Flange
5112-MCMounting Tee
Cap
5323-SPRight Angle
Base
55815-Way 90
5331-CP3-Way Caster Plug
4AC105Stack Plug
52012-Way Straight
53313-Way 90
53213-Way Tee
54514-Way 90
54414-Way Cross
49CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1” NYLON CONNECTORS - HEXAGON ALUMINUM TUBE FRAMINGUSE WITH 1” ALUMINUM SQUARE TUBING
HALF HEXAGON ALUMINUM FRAMING CONNECTORS
545106Hex Side Top
566106Hexagon Center
532306Hex Tee Cross
56MDLEHex Middle
532106Hex Side Bottom
56SBHR1/2 Right Hex Side Bottom
56STHR1/2 Right Hex Side Top
56SBHL1/2 Left Hex Side Bottom
56STHL1/2 Left Hex Side Top
Half Hexagon
1.00”
1.00”
.0625”
R .125”
.50”
.25”
.25”
.325” 1.00”
1.00”.50”
R .125”
.218
.326”
.326”
1.00” .50”
1.00”
R .125”
.260”
.143”
.468”
1.00” .375”
1.00”
R .125”
.750”
1.00” .375”
1.00”
R .250”
R .063”
.130”
.375”
.560”
1.00” .625”
1.00”
R .125”
1.00”
.375”
.560”
1.00” .625”.625”
R .125” R .125”
1.00”
.625”
.375”
.560”
1.00” .625”
.260”.260”
.143”
.468”
1.00” .375”.375”
1.00”
R .125” R .125”.375”
.260”
.143”
.468”
1.00” .375”
1.00”
.260”
E-9215MF, BK, EA
50 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1” NYLON CONNECTORS - OCTAGON ALUMINUM TUBE FRAMINGUSE WITH 1” ALUMINUM SQUARE TUBING
HALF OCTAGON ALUMINUM FRAMING CONNECTORS
545108Octagon Side Top
Full Octagon
532308Octagon Tee Cross
532108Octagon Side Bottom
58STHLOctagon Side Top Left
58BHLOctagon Side Bottom Left
58STHROctagon Side Top Right
58BHROctagon Side Bottom Right
588108Octagon Center
58MDLEOctagon Middle
58BTMOctagon Bottom
1.00”
1.00”
.0625”
R .125”
.50”
.25”
.25”
.325” 1.00”
1.00”.50”
R .125”
.218
.326”
.326”
1.00” .50”
1.00”
R .125”
.260”
.143”
.468”
1.00” .375”
1.00”
R .125”
.750”
1.00” .375”
1.00”
R .250”
R .063”
.130”
.375”
.560”
1.00” .625”
1.00”
R .125”
1.00”
.375”
.560”
1.00” .625”.625”
R .125” R .125”
1.00”
.625”
.375”
.560”
1.00” .625”
.260”.260”
.143”
.468”
1.00” .375”.375”
1.00”
R .125” R .125”.375”
.260”
.143”
.468”
1.00” .375”
1.00”
.260”
E-9215MF, BK, EA
51CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
3/4” NYLON CONNECTORS - ALUMINUM TUBE FRAMINGUSE WITH 3/4” ALUMINUM SQUARE TUBINGAvailable by Special Order
5210752-Way 90 Degree
5580755-Way 90 Degree
5117MCMounting Tee Cap
510075End Cap
5680756-Way 90 Degree
5200752-Way Straight
532375Tee Flange
5330753-Way 90 Degree
5320753-Way Tee
5440754-Way Cross
3/4” SQUARE ALUMINUM TUBE FRAMINGAvailable by Special Order
E-160726Special Order
E-111257Special Order
E-162906Special Order
.760” .760”
.348” .348”
.760” .760”
.370”
.050” .050”
.065”
.760”
.348” .348”
.348”
.348”
.760”
.370”
.050”
.065”
52 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1-1/2” SQUARE ALUMINUM TUBE FRAMING
1-1/2” NYLON CONNECTORS - ALUMINUM TUBE FRAMINGUSE WITH 1-1/2” ALUMINUM SQUARE TUBINGAvailable in Black Fiberglass ReinforcedAvailable by Special Order
521150BK
2-Way 90 Degree
544150BK
4-Way Cross
545150BK
4-Way 90 Degree
558150BK
5-Way 90 Degree
568150BK
6-Way 90 Degree
5MC150BK
Mounting Tee Cap
510150BK
End Cap
520120BK
2-Way Straight
532150BK
3-Way Tee
533150BK
3-Way 90 Degree
AR-1438MF, EA
1.50”
1.50”
.125”
R .125”
53CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
KICK PLATES ARE CUSTOM MANUFACTURED TO YOUR SPECIFICATIONSAt Eagle Mouldings, we custom manufacture stainless steel and aluminum kick plates to your exact specifications and requirements.
When you place an order with us, please remember to specify the following:
Material: Aluminum or Stainless SteelDimensions: “A” length x “B” heightThickness: 16 or 18 GaugeFinish: Aluminum - Anodized Aluminum - Mill Finish Stainless Steel - Polished Stainless Steel - Brushed #4Holes: Drilled or UndrilledCorners: Radius or SquareQuantity: Total needed
KICK PLATES
A
B
When choosing aluminum kick plates versus stainless steel kick plates, keep in mind the intended use of the door. The standard height is anywhere from 6 inches to 24”, but there are many different options available:
TYPES OF KICK PLATES
• Mop Plate: Usually 8″ high and installed flush with the bottom of the door. Used to prevent janitorial mops from damaging the door.
• Armor plate: Anything up to 48″ high, and covers the entire bottom half of the door.
• Stretcher plate: Commonly used in hospitals to prevent damage from gurneys and stretchers. Usually between 6″ and 12″ high, and installed at the approximate height of the handle, parallel to the floor.
A metal kick plate should always be ordered 2 inches narrower than the width of the door so that it doesn’t get in the way of the doorjamb when you are closing the door.
Call for pricing of stainless steel and aluminum kick plates today at 1-800-888-2044.
54 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
B
A
C
A
A
18 Gauge
Flanged
A
A
18 Gauge
Straight
CORNER GUARDS
ALUMINUM FINISHES:BA Buffed & Anodized ClearBK Anodized BlackEA Etched & Anodized Satin ClearMF Mill Finish, as extruded
ALUMINUM CORNER GUARDSAvailable in lengths of 4’, 6’, 8’, 12’, or custom lengths.Additional sizes available upon request.Radius Corners and Flanged Edges available upon request.
ITEM A B FINISHES
A-103 .500 .0625 MF, BK, EA
A-803 .750 .0625 MF, BD, BK, EA
A-903 1.00 .0625 MF, BK, EA
A-1425 1.50 .0625 MF, BK, EA
A-1163 1.50 .125 MF, BK, EA
A-1202 2.00 .125 MF, EA
A-1446 3.00 .125 MF, EA
ITEM A LENGTH GAUGE
SS-4038-18 .75 48” 18
SS-4100-18 1.00 48” 18
SS-4114-18 1.25 48” 18
SS-4112-18 1.50 48” 18
SS-4118-18-F 1.50 48” 18
SS-4200-18 2.00 48” 18
SS-4200-18-F 2.00 48” 18
SS-8200-18 2.00 96” 18
SS-8200-18-F 2.00 96” 18
SS-4212-18 2.50 48” 18
SS-4212-18-F 2.50 48” 18
SS-8212-18 2.50 96” 18
SS-8212-18-F 2.50 96” 18
STAINLESS STEEL CORNER GUARDSEasy to maintain, undrilled, 90 degree, stainless steel corner guards. Flanged guards will have (-F) code after the item number. Other lengths available upon request.
STAINLESS STEEL FINISHES:POL Polished Stainless SteelBSS Brushed Stainless Steel
55CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
3.00”
2.50”
2.50”
2.50”
2.00”
1.50”
1.125”
.750”
LEXAN CORNER GUARDS
ITEM LEG SIZE LENGTH DESCRIPTION
TG-48 .750 48” Clear Lexan w/ nails
TG-96 .750 96” Clear Lexan w/ nails
SS-48 .750 48” Self Stick Clear Lexan
SS-96 .750 96” Self Stick Clear Lexan
TG-4118-CL 1.125” 48” Clear Lexan Drilled w/ screws
TG-8118-CL 1.125” 96” Clear Lexan Drilled w/ screws
TG-10118-CL 1.125” 120” Clear Lexan Drilled w/ screws
TG-4112-CL 1.50” 48” Clear Lexan Drilled w/ screws
TG-8112-CL 1.50” 96” Clear Lexan Drilled w/ screws
TG-4200-CL 2.00” 48” Clear Lexan Drilled w/ screws
TG-8200-CL 2.00” 96” Clear Lexan Drilled w/ screws
TG-4212-CL 2.50” 48” Clear Lexan Drilled w/ screws
TG-4212-CL-45 2.50” 48” Clear Lexan Drilled w/ screws
TG-4212-CL-135 2.50” 48” Clear Lexan Drilled w/ screws
TG-8212-CL 2.50” 96” Clear Lexan Drilled w/ screws
TG-8212-CL-45 2.50” 96” Clear Lexan Drilled w/ screws
TG-8212-CL-135 2.50” 96” Clear Lexan Drilled w/ screws
TG-4300-CL 3.00” 48” Clear Lexan Drilled w/ screws
TG-8300-CL 3.00” 96” Clear Lexan Drilled w/ screws
LEXAN CORNER GUARDSClear Lexan corners made from high impact polycarbonate.
Custom lengths, drilling, or tap are available by Special Order with no mininums.
Corners, wall ends, and partitions are especially subject to impact abuse. Eagle Mouldings Lexan corner and wall guards are made from the high impact polycarbonate material used in car bumpers. Clear Lexan corner guards are guaranteed to last for years without cracking, chipping, warping, or yellowing. Install with screws or brads.
TG-4300, TG-8300
TG-4212, TG-8212
TG-4200, TG-8200
TG-4112, TG-8112
TG-4118, TG-8118
TG-48, TG-96
TG-4212-CL-135TG-8212-CL-135
TG-4212-CL-45TG-8212-CL-45
56 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
2.50”1.125”.750”
3.00” 4.00”
3.00” 4.00”
LEXAN WALL GUARDSClear Lexan wall guards made from high-impact polycarbonate.
ITEM LEG SIZE LENGTH DESCRIPTION
WG-3-CL 3.00” 96” Clear Lexan Wall Guard
WG-4-CL 4.00” 96” Clear Lexan Wall Guard
WG-4
WG-3
ITEM + COLOR CODE LEG SIZE LENGTH DESCRIPTION
TG-48-UN-B2 (color code) .750 48” Untaped colored Lexan corner
TG-96-UN- (color code) .750 96” Untaped colored Lexan corner
SS-48- (color code) .750 48” Self Stick Color Lexan
SS-96- (color code) .750 96” Self Stick Color Lexan
TG-4118- (color code) 1.125” 48” Color Lexan corner
TG-8118- (color code) 1.125” 96” Color Lexan corner
TG-4112- (color code) 1.50” 48” Color Lexan corner
TG-8112- (color code) 1.50” 96” Color Lexan corner
LEXAN CORNER GUARD COLORS• Color Lexan corners made from high-impact polycarbonate. • There is no need to patch any imperfections that your corner may have, because you can’t see through it.• Corners can be glued and eliminate the need for screws resulting in a clean finished look. Custom drilling or
tape available by special order.
TG-4212, TG-8212TG-4118, TG-8118TG-48, TG-96SS-48, SS-96
WhiteWT
IvoryIV
BeigeBE
GreyGR
Dark BrownBR
BlackBK
57CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.0625”
1.00”
1.125”
1.625”
1.125”
1.75”
1.0625”
.09375”
2.50”
1.50” 1.625”
STAIR NOSINGS
C-404H - Hammered Textured SilverHG - Hammered Textured Gold
C-484Special Order
C-451G - Gold PowdercoatS - Silver Powdercoat
C-434HG - Hammered Textured Gold
E-2932Special Order
Extrusions shown at actual size
NEW RENDERING HERE
58 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.3125”
1.375”
.3125”
1.125”
.75”
1.4375”
.345”
1.304”
.407”
1.425”
.09375”
.75”
.25”
1.00”
.375”
1.50”
2.50”
.25”
1.1875”
.105”
1.1875”
.125”
ALUMINUM TILE EDGE
CM-2170Brite Dip Gold Special Order
HEAVY DUTY CARPET BAR - 3/4”ALUMINUM CARPET EDGE
C-364 METALSpecial Order
C-164MF
Special Order C-144HG - Hammered Gold
H - Hammered Silver isSpecial Order
CM-2171Brite Dip Gold Special Order
Extrusions shown at actual size
ALUMINUM BINDER BAR
ALUMINUM THRESHOLDS
C-402EA
C-204H - Hammered Textured SilverHG - Hammered Textured Gold
C-231H - Hammered Textured Silver
HG - Hammered Textured Gold is Special Order
C-214H - Hammered Textured Silver
HG - Hammered Textured Gold is Special Order
E-555EA
Drilled, Countersunk
C-294H - Hammered Textured Silver
59CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
ALUMINUM SPECIALTY THRESHOLDS
6.00”
.50”
5.00”
.50”
5.00”
.50”
4.00”
.50”
5.00”
.50”
.875”
6.00”
.25”
5.00”
.50”.25”
5.00”
.25”
4.00”
.25”S-404MF, BZ, DK
S-424MF, BZ, DK
S-405MF, BZ, DK
S-425MF, BZ, DK
S-282MF, BZ, DK
S-483MF, BZ, DK
S-487MF, BZ, DK
S-406MF, BZ, DK
S-426MF, BZ, DK
Extrusions shown at actual size
60 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
RETRO & NOSTALGIC ’50S COUNTERTOP TRIM & TABLE ALUMINUM TRIMS
Eagle Mouldings is your number one source for hard-to-find classic, retro, and nostalgic 1950’s countertop trims and table edging strips. If you are looking for nostalgic aluminum trims, we have what you need. Aluminum kitchen counter table edg-ing strips inject vintage style into any renovation. Our retro diner trims and mouldings will take your project instantly back to the 50’s. Adding trim to any laminate countertop or table protects the edge and introduces a classic flair. We also stock retro trim for your classic RV or trailer. Our polished table and counter edging is easy to maintain and keep clean. It’s the perfect addition to any classic, retro, or nostalgic 50’s project.
CREATE A CLASSIC RETRO LOOK FOR YOUR FURNITURE OR BUILDING PROJECT
• Restaurant Furniture• Tables• Chairs• Booths• Counter Tops• Campers• Food Trailers
STYLES• Corrugated Face & Bar Nosings• Coves• Fluted Tees• Fluted Face Angles• Groove Face Nosing• Insert Nosing• Plain Face Nosing
FINISHES • BA – Buffed & Clear Anodized (dull shine)• BD – Brite Dipped Anodized (bright shine)• EA- Etched & Clear Anodized (satin – not shiny)• POL – Polished (mirror-like finish)
EXCEPTIONAL CUSTOMER SERVICE, SAME DAY SHIPPINGAt Eagle Mouldings satisfied customers are our passion. We strive
to provide fast, friendly, and helpful customer service. We supply
only the highest quality nostalgic trim and edging. Each order is
professionally packed and shipped to anywhere in North Ameri-
ca. Call us today or shop our easy website to get started on your
aluminum extrusion project.
EXTRUDED RETRO TRIM | CUSTOM & OEMOur custom and OEM aluminum extrusion services allow us to
meet any need our customers may have. We can cut to length or
miter, punch, drill and countersink, form or bend any extrusion to
specifications as well as offer many standard and custom anod-
ized colors and finishes including satin, Brite dipped and brushed
finishes. If we don’t have the trim or molding that meets your
requirements, our professionals will assist you in engineering and
custom creating the part you need.
61CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.375”
.531”
.625”
.875”.75”
.8125”
.50”
2.00”
.40”
2.25”
.42”
1.50”
.42”
.875”
.25”
2.00”
.265”
.875”
.234”
1.25”
.625”
.42”
E-021EA
Drilled & Undrilled
E-031BD
Drilled & Undrilled
A-219BD
Drilled & Undrilled
E-421BD, EA
Undrilled
E-7364EA
13/16” Face EAM-900EA
1-1/4” Face
E-625BD, EA
1-1/2” Face
BST-214BD
2-1/4” Face
E-88BD
2” Face
RETRO ALUMINUM NOSTALGIC 50’S TRIMSGROOVED FACE NOSINGCOVES
NOSTALGIC 50’S FACE TRIMS
Trims shown at actual size
3 WING CUTTER ASSEMBLY
Cutter-bearing assembly with 3 wing, .080” x 1/4” shank
E-221BD - Drilled & Undrilled
EA - Drilled(Drilled on long leg)
E-510BD, EA
Drilled & Undrilled(Drill hole is not centered)
SL080-3A2
62 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1948 Brought TV’S Candid Camera & Hop-along Cassidy.
1949 Congress raised the minimum wage from 40 to 75 cents. The Presidential salary was raised to $100,000 a year. Silly Putty,
Scrabble board game & Pillsbury’s prepared cake mixes were introduced. The Lone Ranger was on TV.
1950 Peanuts comic strip debuted, The Howdy Doody Show was on TV. New in 1950 was Grand Prix Racing, Betty Crocker’s Picture
Cook Book & Minute Rice.
1951 The African Queen was on Film. I Love Lucy won 60% of the TV audience its first season,
Dennis the Menace was a hit. Power Steering was introduced on the Chrysler Crown Imperial.
1952 The 3D craze where moviegoers donned goofy Red & Green lensed goggles to experience the thrill. New for 1952, Sony’s
pocket-sized transistor, Mad magazine & sugar-free soft drink No-Cal.
1953 The first issue of Hugh Hefner’s Playboy magazine came out in July. In Living Color - television broadcasts in color on NBC.
The Corvette sports car hit the streets.
1954 The Tonight Show starring Steve Allen, televising of Miss America Pageant & Father Knows Best
1955 Both Kentucky Fried Chicken & McDonald’s began, TV brought us The Lawrence Welk Show,
The $64,000 Question & Captain Kangaroo. Ann Landers wrote her first column.
Chuck Berry’s Maybellene his first hit. Play-Doh was introduced by Kenner Top.
1956 Elvis Presley became a TV sensation on The Ed Sullivan Show. As The World Turns,
The Price is Right & The Honeymooners were TV hits.
1957 Ford Motor Co. rolls out the Edsel, New were The Frisbee from Pluto Plotter and Smith Corona’s Portable Electric Typewriter.
TV brought us Leave It to Beaver, Perry Mason & Dick Clark’s American Bandstand.
1958 Stereophonic records were introduced. Sweet’ N’ Low came to market.
1959 Popular shows on television were Bonanza, The Many Loves Of Dobie Gillis, and Rawhide.
1960 Itsy Bitsy Teenie Weenie Yellow Polka Dot Bikini song was popular. The Andy Griffith Show began.
LIVE & RELIVE THE DEFINING MOMENTS OF OUR TIMES
63CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.00”
1.00”
.0625”
R .125”
1.00”
1.00”
.090”
R .093”
2.00”
1.00”
.080”
R .093”
1.00”
1.00”
.070”
.344”
.553”
1.00”
1.00”
.095”
.344”
.554”
1.00”
1.00”
1.00”.095”
.344”
.554”
1.094”
.0625” .464”
.180”
1.00”
1.00”
.0625”
.1875”
1.00”
1.00”
.120”
.344”
.553”
2.00”
1.00”.344”
.095”
.408”
.400”
.510”
1.00”
.078”
2.50”
.75”.75”
.344”
1.00”
.095”
2.00”
1.00”
1.00”
1.75”
.0625”
.1875”.75”
1.00”
2.00”
1.00”
.046”
E-7251MF
E-10039MF
E-9748MF
E-3823MF
E-9349MF
E-15551MF
Insert V-2038
E-15554MF
Insert V-2038
E-15549MF
E-15553MF
Insert V-2038
E-15552MF
Insert V-2038
E-15555MF
Insert V-2038
E-15550MF
Insert V-2038
E-9215MF
E-16908MF
V-2038Black
Sold by the foot
AWNING
VINYL TEE INSERT: Used to secure fabric into aluminum framing.
64 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.25”
.684”
.214”
1.234”
.50”
.316”
1.45”
.612”
.401”
1.01”
.437”
.9375”
.5625”
1.125”
.50”
1.00”
.030”
1.625”
1.125”
1.50”
.6875”
1.0625”
1.125”
.75”
.25”
.565”
1.25”
.20”
.21”
1.1875”
.390”
.25”
BOAT / MARINE RUB RAIL
VINYL INSERT FOR RUB RAIL
E-5690EA
Insert Sold SeparatelyV-110 Insert BK, RD, WT
E-672BA
Insert Sold SeparatelyV-744 Insert BK
V-8151BK
V-744BK
V-8122BK
V-110BK, RD, WT
E-1002Special Order
Insert Sold SeparatelyV-8122 Insert BK
Products shown at actual size
R-250BK
Rubber Channel
V-843Special Order
V-840 Inside Track V-1494BK
V-744 Insert BK
V-2078BK
V-8151 BK Insert
VINYL RUB RAILS
ALUMINUM RUB RAILS
E-2605Special Order
E-1904Special Order
65CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.50”
.875”
1.8125”
.0625”
.75”
.062”
.75”
.075”
1.50”
.5625”
1.875”
.75”
.50” .550”
1.25”
.5468”
.8125”
.4375”
1.75”
.5625”
BOAT / MARINE RUB RAIL
UNIFLEX RUB RAIL SYSTEM
UNIFLEX RUB RAIL INSERTS
ALUMINUM TRANSOM SECTION
V-1072BK, WT
SS-340 Stainless Steel
V-1102WT
SS-340 Stainless Steel
V-92159BK
V-713 Insert BK, WT
V-92051BK
V-758 Insert BK
• One-piece semi-rigid inner core and a flexible outer body.• Retains its shape when flexed, doesn’t crimp, easing insert installation.• Flexes predominately in one direction, easily bending around corners.• The system is more efficient in bearing the load of fasteners, greatly
reducing “fastener bulges”.
SS-340.075” Stainless Steel
SS-340-L.062” Stainless Steel
Extrusions shown at actual size
V-713BK, WT
V-758BK
A-1144MF, EA
A-326MF, BA
Drilled & Undrilled
A-328MF, BA
Drilled & Undrilled
STAINLESS STEEL RUB RAIL
RUB RAIL SYSTEM WITH STAINLESS STEEL
66 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
STAINLESS STEEL OVALSCONCAVE BACK HALF OVALS
Highly polished stainless steel type 304
SOLID BACK HALF OVALS
.75”1.00”
1.25”
.125”
.75”
.062”
.75”
.075”
1.00”
.075”
1.25”
.075”
.4375” .50”
.1875”
.75”
.1875”
1.00”
.1875”
2.00”
.25”
.188”
.250”
.375”
SS-340-SBDrilled
SS-100-SBDrilled
SS-114-SBDrilled
RUB RAIL ENDSRUB STRAKES
BOAT / MARINE RUB RAIL
SS-340-ENDStainless Steel
SS-340-RSStainless Steel
SS-100-ENDStainless SteelSS-100-RS
Stainless Steel
SS-114-ENDStainless SteelSS-114-RS
Stainless Steel
ITEM WIDTH LENGTHS
SS-340-END .750” 12”, 18”, 24”
SS-100-END 1.00” 12”, 18”, 24”
SS-114-END 1/25” 12”, 18”, 24”
ITEM WIDT H L ENGTHS
SS-340-RS .750” 12”, 18”, 24”
SS-100-RS 1.00” 12”, 18”, 24”
SS-114-RS 1/25” 12”, 18”, 24”
Extrusions shown at actual size
SS-114Drilled,
Undrilled available on request
SS-100Drilled,
Undrilled available on request
SS-340Drilled,
Undrilled available on request
SS-340-LDrilled,
Undrilled available on request
67CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.25”
.75”
1.063” 1.20”
1.075”
5.968”
.50”
.080”
.062”
.730”
6.059”
.745”
.073”
9.250”
.070”
.375”
1.485”
1.00”
5.875”
.50”
APPLICATIONS: • Decking• Ramp• Swim Raft• Dock• Trailer• Floor
• Roof• Industrial Bench• Mezzanine• Walkway• Stair Tread
DOCK, DECKING, BLEACHER
DOCK, DECKING
DOCK, DECKING - INTERLOCKING
DOCK, DECKING - INTERLOCKING
DOCK, DECKING - INTERLOCKING
EAM-1382Special Order
EAM-0565Special Order
EAM-1381Special Order
E-494MF
End Cap EAM-393 for Edge of Decking
EAM-393MF
24’ Lengths
68 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
AR-953 Nut Channel
2.313” x 2.313”
AR-7024Square Tubing
2” x 2”
1/2” Set Screw
1/2”Hex Nut
2.313”
.875”
2.313”
.500”
.125”
1.073”
5.970”
.375”
.075”
.030”
1.073”
5.970”
.375”
.075”
.050”
1.073”
5.970”
.375”
.075”
.030”
ALUMINUM TUBE -SQUARE NUT CHANNEL
AR-953 square nut channel and AR-7024 insert tubing is a very popular system for adjustable posts on docks.
DOCK, DECKING, BLEACHER
DOCK, DECKING (B)AGGRESSIVE RAMP TREAD
DOCK, DECKING (A)INTERMEDIATE RAMP TREAD
DOCK, DECKING (C) TRANSITION -INTERMEDIATE RAMP TREAD
EAM-1376Special Order
EAM-1227Special Order
EAM-0264Special Order
AR-953MF
24’ Lengths
69CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
2.750”
1.527”1.745”
.100”
1.745”.100”
3.995”
1.527”1.745” .100”
.082”
5.225”
1.75”
9.50”
1.00”
.625”
1.75” 1.94”
9.22” Assembled Length 11.97” Assembled Length
Left EndEAM-0267
Right EndEAM-0268
ExtensionEAM-0410
Right EndEAM-0268
Left EndEAM-0267
.938”
BLEACHER, SEAT PLANK
E-146MF, EA
End Cap for EAM-139 Edge of Bleacher, Seat
Plank
EAM-139MF
24’ Lengths
DOCK, DECKING, BLEACHER
BLEACHER, SEAT PLANK SYSTEM
EXTENSION (UP TO 12”) BLEACHER, SEAT PLANK
LEFT END BLEACHER, SEAT PLANK
RIGHT END BLEACHER, SEAT PLANK
EAM-0410Special Order
EAM-0268Special Order
EAM-0267Special Order
70 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.00”
1.3125”
1.0625”
.125” .50”
4.00”
.090”
4.00”
.75”
.75”
1.9375”
.50”
.50”
.080”
R .047”
E-8097Square Tubing
1/2” x 1/2”
A-7136Channel
A-7136Channel
E-4932Rail
ALUMINUM RAILING & POST SYSTEM
ALUMINUM RAILING POST
E-4932MF
24’ Lengths
E-8097MF
Square Tube Pickets
A-7136MF
Channel Top & Bottom Rail 24” Lengths
E-44-SPSpecial Order
Square Aluminum Railing Postwith Screw Ports
71CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.059” .276”
.59”.335”
1.26”.875”
.090”
.59”.25”
.695”.25” .437” .4375”
1.50”
.090”
.75”.375”
1.25”
.684”
.214”
1.00”
.030”
.53125”
.75”
.290”
.185”.813”
.563”
.060”
.215”
1.25”
.20”
.21”
1.1875”
.390”
.25”
RV, MOTORHOME, TRAILER
EAM-2643MF
EAM-2925MF
EAM-2420 MF
E-400BD, EA
Undrilled, Flat Back Tape Application
E-19344MF
Cap for Tread Brite
E-2605POL
E-1904Special Order
E-5690EA
VINYL INSERT FOR ROOF EDGING
V-110BK, RD, WT
“C” CHANNEL, SLIDE TRACK CHANNEL
ROOF EDGING, RUB RAIL
J-CAPS DRIP GUTTER
Extrusions shown at actual size
72 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
1.50”
3.32”1.00”1.00”
1.00”.090”
.125”
2.00”
3.25”
.50”.625” .625”
2.125”
1.75”
.1875”
5.00”
1.875”
R .250”
.9375” .9375”
3.00”.75”.75”
.875”
1.50”
.125”
1.50”
2.823”
.245”
.045”
1.490”
.063”.281”
.100”
.75”1.00”
1.375”
.040”
1.00”
2.00”
1.01”
.050”
RV, MOTORHOME, TRAILER
E-19110MF
Top Roof Rail
E-19650MF
Bottom Rail
E-17401MF
Drip Edge
EAM-2986MF
E-5383Special Order
EAM-2884MF
EAM-2398Special Order
E-17394MF
Door Frame
Extrusions shown at actual size
73CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
3.00”
1.00” .125”.125”
.250” or LessMaterial Thickness
3.00”
3.00”
.125”
R .125”
For #10 type F stainless steel screws, use 11/64” drill bit and use a lubricant
on the screws.
EAM-555-CCorner Angle
EAM-555-CCorner Angle
EAM-555-NCNotched Angle attached to
A-50 Channel with self-drilling screw
Use center punch to secure permanent sides.
A-50 Channelused on larger signs for added support.
2.00”
2.00”
R .125”
.125”
SIGNAGE, EXHIBITS
ALUMINUM POSTS2” x 2” and 3” x 3” square aluminum tubing for post and panel signs.
EAM-555MF
AR-7024MF, BK, EA
AR-7033MF
Post & Panel Sign
SIGN SYSTEM - EAM-555
• High strength design.• Easy to assemble with the angle bracket corners.• This multiple channel design gives designers more options. Example, graphics can
be appllied to both clear panels positioned to give a multi-directional look.• Other finishes available by special order.
74 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.535”
1.07”
.30”
.36”
.424”
.57”
.30”
.335”
.432”
1.00”
.305”
.625”Corner Key
MachineScrews
.75”
.75”
.265”
.265”
.063”
.944”
.472”
.354”
.354”
.118”
1.25”
.75”
.3875”
.6875”
.0625”
.75 ”
.600”
.170”
.063”
.656”
.356”
.280”
.0625”
1.188”
.563”
.255”
.050”
1.00”
.50”
.265”
.063”
1.50”
.265”
1.00”
.080”
1.50”
.265”
1.50”
.085”
E-7342EA
EAM-3377MF, EA
E-8642BD, EA
E-11224EA
E-11224-KEYCorner Key for
E-11224
EAM-666MF, EA
.059” Screw Port
EAM-600MF, BK, EA
.147” Screw Port
EAM-3108MF, EA
EAM-2860MF, EA
EAM-3625MF
SIGNAGE, EXHIBITS
E-6457Special Order
F TRACK CHANNELS, CHANNELS
S-107MF
S-106MF
Extrusions shown at actual size
75CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
.50”
.25”
.25”
.325” 1.00”
1.00”.50”
R .125”
.218
.326”
.326”
1.00” .50”
1.00”
R .125”
.260”
.143”
.468”
1.00” .375”
1.00”
R .125”
.260”.260”
.143”
.468”
1.00” .375”.375”
1.00”
R .125” R .125”.375”
.260”
.143”
.468”
1.00” .375”
1.00”
.260”
1.5625”
1.0625”
.25”
2.50”
.265”
1.50”
.090”
1.50”
.265”
1.50”
.090”
1.375”
.1875”.290”
.20”
SIGNAGE, EXHIBITS
S-132MF
Hanging Retainer
S-113MF
Hanging Retainer
S-131MF
Hanging Retainer
S-130MF
Hanging Retainer
DIVIDERS
1” SQUARE ALUMINUM TUBE FRAMING1” nylon tube frame connectors are also available.
E-62198EA
EAM-2265EA
E-62200EA
E-61970EA
E-62199EA
Extrusions shown at actual size
76 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
CONTINUOUS ALUMINUM HINGE - IN STOCK
ITEM GAUGE OPEN WIDTH HINGE LENGTH FINISH PIN DIAMETER
KNUCKLE LENGTH
1240-1.5 .040 1.25 72” Mill Finish .090 .50”
1240-1.25-BKH .040 1.25 72” Black Hard Coat .090 .50”
1240-1.25-EA .040 1.25 72” Satin Anodized .090 .50”
1240-1.5-MF .040 1.25 72” Mill Finish .090 .50”
1240-1.5-EA .040 1.25 72” Satin Anodized .090 .50”
1240-2 .040 2.00” 72” Satin Anodized .090 .50”
1260-1.5-MF .040 2.00” 72” Mill Finish .120” .50”
1260-2-MF .040 2.00 72” Mill Finish .120” .50”
1260-2-EA .040 2.00 72” Satin Anodized .120” .50”
1260-3 .040 3.00 72” Mill Finish .120” .50”
1260-3-EA .040 3.00 72” Satin Anodized .120” .50”
741-A-1-MF .074 1.00 72” Mill Finish .250” 1.00”
741-A-1-MF .074 1.00 72” Mill Finish, Staked .250” 1.00”
741-A-1-UNST .074 1.00 72” Mill Finish, Unstaked .250” 1.00”
741-A-3 .074 3.00 72” Mill Finish .250 1.00”
CONTINUOUS ALUMINUM HINGE - SPECIAL ORDER
ITEM GAUGE OPEN WIDTH HINGE LENGTH FINISH PIN DIAMETER
KNUCKLE LENGTH
1240 .040” .750”, 1.062”, 2.00” 72”, 96” Mill Finish, Satin Anodized, Black .090 .50”
1260 .060 1.25”, 2.50”, 3.50”, 4.00” 72”, 96” Mill Finish, Satin Anodized, Black .120” .50”
1060 .060 1.25”, 1.50”, 2.00”, 2.50”, 3.50”, 4.00” 72”, 96” Mill Finish, Satin Anodized, Black .120” 1.00”
1267 .060 1.25”, 1.50”, 2.00”, 2.50”, 3.00” 72”, 96” Mill Finish, Satin Anodized, Black .187” .50”
607 .060 1.25”, 1.50”, 2.00”, 2.50”, 3.00” 72”, 96” Mill Finish, Satin Anodized, Black .187” 1.00”
1247 .074” 1.50”, 2.00”, 2.50”, 3.00” 72”, 96” Mill Finish, Satin Anodized, Black .187” .50”
747 .074” 1.50”, 2.00”, 2.50”, 3.00” 72”, 96” Mill Finish, Satin Anodized, Black .187” 1.00”
741 .074” 1.50”, 2.00”, 2.50” 72”, 96” Mill Finish, Satin Anodized, Black .250” 1.00”
901 .090” 2.00”, 3.00” 72”, 96” Mill Finish, Satin Anodized, Black .250” 1.00”
1110 .120” 2.00”, 3.00” 72”, 96” Mill Finish, Satin Anodized, Black .50” 1.00”
Hinge Length
Pitch
LeafWidth
OpenWidth
KnuckleLength
Pin
KnuckleDiameter
End Play
ALUMINUM HINGE - CONTINUOUS
77CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
ALUMINUM SHEET
ITEM THICKNESS SIZE SQ. FT. PER SHEET
LBS. PER SQ. FT. LBS. PER SHEET ALLOY
TEMPER
.032-4 x 10 .032 48” x 120” 40’ .452 18.08 5052 H-32
.040-4 x 10 .040 48” x 120” 40’ .565 22.60 5052 H-32
.050-4 x 10 .050 48” x 120” 40’ .706 28.24 5052 H-32
.063-4 x 8 .063 48” x 96” 32’ .889 28.45 5052 H-32
.063-4 x 10 .063 48” 120” 40’ .889 35.56 5052 H-32
.080-4 x 8 .080 48” 96” 32’ 1.127 36.06 5052 H-32
.080-4 x 10 .080 48” x 120” 40’ 1.127 45.08 5052 H-32
.090-4 x 8 .090 48” x 96” 32’ 1.274 40.77 5052 H-32
.090-4 x 10 .090 48” x 120” 40’ 1.274 50.96 5052 H-32
.100-4 x 8 .100 48” x 96” 32’ 1.397 44.71 5052 H-32
.100-4 x 10 .100 48” x 120” 40’ 1.397 55.88 5052 H-32
.125-4 x 8 .125 48” x 96” 32’ 1.746 55.872 5052 H-32
.125-4 x 10 .125 48” x 120” 40’ 1.746 69.84 5052 H-32
.125-5 x 10 .125 60” 120” 50’ 1.746 87.30 5052 H-32
.188-4 x 8 .188 48” x 96” 40’ 2.658 106.32 5052 H-32
.250-4 x 10 .250 48” x 120” 40’ 3.492 139.70 5052 H-32
ITEM THICKNESS SIZE SQ. FT. PER SHEET
LBS. PER SQ. FT.
LBS. PER SHEET
ALLOY TEMPER
.040-4 x 10-BK .040 48” x 120” 40’ .54 21.60 Black Gloss
.040-4 x 10-CB .040 48” x 120” 40’ .54 21.60 Chevron Blue
.040-4 x 10-HB .040 48” x 120” 40’ .54 21.60 Heron Blue
.040-4 x 10-IG .040 48” x 120” 40’ .54 21.60 Ivy Green
.040-4 x 10-MT .040 48” x 120” 40’ .54 21.60 Mocha Tan
.040-4 x 10-RD .040 48” x 120” 40’ .54 21.60 Red
.040-4 x 10-WT .040 48” x 120” 40’ .54 21.60 White
.040-4 x 10-YW .040 48” x 120” 40’ .54 21.60 Yellow
ALUMINUM SHEET - PAINTED
ITEM THICKNESS SIZE SQ. FT. PER SHEET
LBS. PER SQ. FT.
LBS. PER SHEET
ALLOY TEMPER
.063-4 x 8-TBT .063 48” x 96” 32’ 1.007 32.224 3003
.063-4 x 10-TBT .063 48” x 120” 40’ 1.007 40.28 3003
.080-4 x 10TBT .080 48” x 120” 40’ 1.239 49.46 3003
.100-4 x 10-TBT .100 48” x 120” 40’ 1.600 64.00 3003
.125-4 x 8-TBT .125 48” x 96” 40’ 1.92 60.80 3003
.125-4 x 10-TBT .125 48” x 120” 40’ 1.92 76.00 3003
.125-4 x 10-TBT .125 60” x 120” 50’ 1.92 96.00 3003
.188-4 x 10-TBT .188 48” x 120” 40’ 2.80 112.00 3003
ALUMINUM SHEET - TREAD BRITE
ALUMINUM SHEET - MILL FINISH OR CLEAR ANODIZED
78 CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
Eagle Mouldings offers custom finishing, fabrication, and cutting services for all stocked and special order extrusions.
FRACTION DECIMAL MM
1/32 .0313 .7938
1/16 .0625 1.5875
3/32 .0938 2.3813
1/8 .1250 3.1750
5/32 .1563 3.9688
3/16 .1875 4.7625
7/32 .2188 5.5563
1/4 .2500 6.3500
9/32 .2813 7.1438
5/16 .3125 7.9375
11/32 .3438 8.7313
3/8 .3750 9.5250
13/32 .4063 10.3188
7/16 .4375 11.1125
15/32 .4688 11.9063
1/2 .5000 12.700
17/32 .5313 13.4938
9/16 .5625 14.2875
19/32 .5938 15.0813
5/8 .6250 15.8750
21/32 .6563 16.6688
11/16 .6875 17.4625
23/32 .7188 18.2563
3/4 .7500 19.0500
CONVERSION CHARTS
FRACTION DECIMAL MM
25/32 .7813 19.8438
13/16 .8125 20.6375
27/32 .8438 21.4313
7/8 .8750 22.2250
29/32 .9063 26.0188
15/16 .9375 23.8125
31/32 .9688 24.6063
1 1.0000 25.4000
1-1/32 1.0313 26.1938
1-1/16 1.0625 26.9875
1-3/32 1.0938 27.7813
1-1/8 1.1250 28.5750
1-5/32 1.1563 29.3688
1-3/16 1.1875 30.1625
1-7/32 1.2188 30.9563
1-1/4 1.2500 31.7500
1-9/32 1.2813 32.5438
1-5/16 1.3125 33.3375
1-11/32 1.3438 34.1313
1-3/8 1.3750 34.9250
1-13/32 1.4063 35.7188
1-7/16 1.4375 36.5125
1-15/32 1.4688 37.3063
1-1/2 1.5000 38.1000
FRACTION DECIMAL MM
1-17/32 1.5313 38.8938
1-9/16 1.5625 39.6875
1-19/32 1.5938 40.4813
1-5/8 1.6250 41.2750
1-21/32 1.6563 42.0688
1-11/16 1.6875 42.8625
1-23/32 1.7188 43.6563
1-3/4 1.7500 44.4500
1-25/32 1.7813 452438
1-13/16 1.8125 46.0375
1-27/32 1.8438 46.8313
1-7/8 1.8750 47.6250
1-29/32 1.9063 48.4188
1-15/16 1.9375 49.2125
1-31/32 1.9688 50.0063
2 2.0000 50.8000
2-1/32 2.0313 51.5938
2-1/16 2.0625 52.3875
2-3/32 2.0938 53.1813
2-1/8 2.1250 53.9750
2-5/32 2.1563 54.7688
2-3/16 2.1875 55.5625
2-7/32 2.2188 56.3563
2-1/4 2.2500 57.1500
FRACTION DECIMAL MM
2-9/32 2.2813 57.9438
2-5/16 2.3125 58.7375
2-11/32 2.3438 59.5313
2-3/8 2.3750 60.3250
2-13/32 2.4063 61.1188
2-7/16 2.4375 61.9125
2-15/32 2.4688 62.7063
2-1/2 2.5000 63.5000
2-17/32 2.5313 64.2938
2-9/16 2.5625 65.0875
2-19/32 2.5938 65.8813
2-5/8 2.6250 66.6750
2-21/32 2.6563 67.4688
2-11/16 2.6875 68.2625
2-23/32 2.7188 69.0563
2-3/4 2.7500 69.8500
2-25/32 2.7813 70.6438
2-13/16 2.8125 71.4375
2-27/32 2.8438 72.2313
2-7/8 2.8750 73.0250
2-29/32 2.9063 73.8188
2-15/16 2.9375 74.6125
2-31/32 2.9688 75.4063
3 3.000 76.2000
79CALL 1-800-888-2044 EMAIL [email protected]
VISIT US ONLINE EAGLE-ALUMINUM.COMSince 1989
50 Medina Street South, Loretto, MN 55357
1-800-888-2044 eagle-aluminum.com © 2021 Eagle Mouldings Inc. V061521