Specialist for Pumping Technology - rps-group.net · Materials of construction per API 610 and API...
-
Upload
duongkhanh -
Category
Documents
-
view
227 -
download
4
Transcript of Specialist for Pumping Technology - rps-group.net · Materials of construction per API 610 and API...
SELECTION GUIDE
I N N O V A T I O N
E F F I C I E N C Y
Q U A L I T Y
RUHRP MPENUSpecialist for Pumping Technology
Ruhrpumpen offers a wide range of pump designs and sizes providing energy effi-cient solutions for the vast majority of duty conditions.
Additionally, Ruhrpumpen can offer inno-vative, tailor-made hydraulics by modifying our high efficiency designs to provide an optimized high quality solution to meet each customer's unique requirements.
The flexibility to adapt our vast product range makes Ruhrpumpen a true "one-stop shop" for all pumping needs.
TM
1
3
CHARACTERISTICS
Single stage horizontal centrifugal pumpRadially split casing with flanged connectionshorizontal end suction and top discharge onthe center lineEnclosed or Semi-open impellerClockwise rotation (viewed from coupling end)Foot mountedOil lubricated
OPERATING LIMITS
Capacity to 1,150 m /h(5,000 U.S. GPM)Head to 235 m (770 ft)Temperature -45 to 315 °C (-50 to 600 °F)
APPLICATIONS
PetrochemicalOil & GasSteel IndustryAutomotiveFood ProcessingPower GenerationPharmaceuticalsWater TreatmentGeneral Process
STANDARD CONSTRUCTION MATERIALS
All ductile ironDuctile iron / stainless steelAll 316 stainless steel
RUHRPUMPEN NOMENCLATURE
CPP-21ANSIIPP
Alloy 20, hastelloy, zirconium and othermaterials available upon request
DESIGN FEATURES
ANSI/ASME Standard B 73.1 (OH1)“Back Pull Out” design for ease of maintenance, allows for removal of pump assembly without disturbing casing flange connections.Standard or large bore stuffing box selection allows for use of packing, and all designs of single or double mechanical seals.Close Coupled assembly availableOptions for high and low temperatures available
ANSIHorizontalProcess Pumps
2
Horizontal Process Pumps Single Stage
CHARACTERISTICS
Radially split, horizontal single stage centrifugal pump.Centerline mounted.Single / double volute depending on size.Single suction, enclosed impeller. Thrust compensation by balance holes. End-Top nozzle arrangement. Centerline discharge nozzle.Materials of construction per API 610 and API 685. Other materials on request.
RUHRPUMPEN NOMENCLATURE
SCE
SCE-M
OPERATING LIMITS
Capacity up to 3,200 m³/h (14,000 U.S. gpm)Head up to 480 m (1,575 ft)Discharge flange size 1'' to 12''Maximum Pressure 90 bar (1,300 psi)Temperature -120 to 450 C (-184 to 850 F)
APPLICATIONS
Petroleum Refining, Production and Distribution.Petrochemical.Heavy-duty Chemical.Gas Industry Services.Power Plants.Utilities.
DESIGN FEATURES
Heavy duty process design according to API 610 and API 685 latest edition (OH2 type). Oil ring lubrication. Other methods of lubrication are available. Replaceable front and back wear rings for casing and impeller. Special design for abrasive liquids available. Low temperature design on request. Inducers for low NPSH available. Fan and Water cooling are available.Rotating element completely removable without disturbing piping or driver. Coke crusher design available for heater charge services. Jacketed casings available for fly ash & similar service.
SCE-MOH2 (API 685)
Magnetic Drive
SCEOH2 (API 610)
3
3
CHARACTERISTICS
Radially split, vertical in-line centrifugal pumpFoot mountedSingle volute casingSingle suction, closed impellerThrust compensation by balance holesSide-Side in-line nozzle arrangementMaterials of construction per API 610,other materials on request
RUHRPUMPEN NOMENCLATURE
SPISPN
Vertical In-line,Process Pumps
OPERATING LIMITS
Capacity 2.5 to 500m /h (11 to 2,201 U.S. GPM)Head 15 to 290 m (52 to 950 ft)Speed up to 3,600 RPMTemperature to 260°C (500°F)MAWP to 41 bar (597 PSI)
APPLICATIONS
Petroleum refining,production and distributionPetrochemicalChemical
DESIGN FEATURES
Heavy duty process design according to API 610 latest edition (OH3 / OH5 type)OH5 (SPN) close coupled designOH3 (SPI) separate bearing bracketReplaceable wear rings forcasing and impeller
SPN
SPI
4
3
CHARACTERISTICS
Axially split, horizontal, single ordouble stage centrifugal pumpFoot or Near-centerline mountedDouble volute casingEnclosed impeller, double suction provides hydraulic balance eliminating axial thrust. Side-Side nozzle arrangementTwo-stage design for higher headsMaterials of contruction per API 610,other materials on request
RUHRPUMPEN NOMENCLATURE
ZMZMSZLM
Axially Split Case Centrifugal Pumps
DESIGN FEATURES
Heavy duty process design according to API 610 latest edition (BB1 type)Ring oil lubrication, other methods of lubrication availableDiffuser design availableReplaceable wear rings for casing andimpellerFan and Water cooling available
OPERATING LIMITS
Capacity 100 to 22,000 m /h(440 to 96,863 U.S. GPM)Head 10 to 1,200 m (33 to 3,930 ft)Discharge flange size 4 to 40 inMax. Pressure 145 bar (2,103 PSI)Temperature 205°C (401°F)
APPLICATIONS
Pipeline service: mainline and boosterOil extraction technology: onshore and offshoreRefinery technologyChemical / Petrochemical industryGeneral industryMetallurgical and steel industriesCombined heating and power stationsPower stations
5
Horizontal SplitCase PumpsSingle Stage
CHARACTERISTICS
Single stage double suction horizontal centrifugal pumpHorizontally split casing, double voluteFlanged connectionsEnclosed impellers, double suctionprovides hydraulic balance eliminatingaxial thrustClockwise or counterclockwise rotationDouble ended shaft availableFoot Mounted
DESIGN FEATURES
Oil or grease lubricated bearingsStuffing box configured for packing or mechanicalseals Horizontal or vertical mounting configurationsRenewable wear rings
STANDARD CONSTRUCTION MATERIALS
Cast ironCast iron, Stainless steel fittedAll bronzeAll WCB grade carbon steelAll stainless steelOther material available upon request
OPERATING LIMITS
Capacity to 31,800m /h (140,000 U.S. GPM)Head to 340 m (1,115 ft)Pressure to 27 bar (298 PSI)Temperature 10 to 150°C (50to 300°F)
3
APPLICATIONS
Fire serviceCooling towersMunicipalOil processPetrochemicalSugar industryPaper industryPipelinePower generationOthers
DewateringMiningWater
RUHRPUMPEN NOMENCLATURE
HSCHSD
HSRZW
6
3
Horizontal SplitCase PumpsMultiStage
CHARACTERISTICS
Two and four stage horizontal centrifugalpumps, double voluteHorizontally split casing, side-side nozzle arrangementEnclosed impellerCounterclockwise rotation viewed fromcoupling end
OPERATING LIMITS
Capacity to 454 m /hr (2,000 U.S. GPM)Head to 670 m (2,200 ft)Pressure 50 bar (739 PSI)Temperature max: 121°C (250°F)
DESIGN FEATURES
Oil lubricated bearingsFlanged connectionsStuffing box allows for packing ormechanical seal
APPLICATIONS
High pressure applications (Boiler Feed,Petrochemical, Chemical, Industrial)Power plants
RUHRPUMPEN NOMENCLATURE
HSM
STANDARD CONSTRUCTION MATERIALS
All cast ironCast iron, bronze fittedCarbon steel, iron fittedCast iron, 316 SS fitted
Capacity to 6,814 m /h(30,000 U.S. GPM)Head to 610m (2,000 ft)Max. pressure to 125 bar (1,813 PSI)Temperature to 450°C (850°F)
Radially split, horizontal single stagecentrifugal pumpCenterline mountedDouble volute casingDouble suction, enclosed impellerThrust compensation by doublesuction impellerTop-Top nozzle arrangement,other arrangements on requestMaterials of construction per API 610,other materials on request
CHARACTERISTICS
DESIGN FEATURES
Heavy duty process design according to API 610 latest edition (BB2 type)Ring oil lubrication, other methodsof lubrication availableFan and water cooling availableCoke crusher design available for heatercharge servicesSide-Side and Side-Top nozzles availableJacketed casings available for fly ash and similar serviceDouble Ended shaft available
OPERATING LIMITS
APPLICATIONS
Heavy duty high temperature processProcess and industrial applicationsincluding: Charge, Transfer, Injection andUtility Booster
RUHRPUMPEN NOMENCLATURE
HVNJJD
Horizontal Double SuctionPump, BetweenBearing Single Stage
7
3
8
OPERATING LIMITSCHARACTERISTICS
Radially split, horizontal two stagecentrifugal pumpCenterline mountedDiffuser / volute combined casingSingle suction, radial, closed impellerDouble suction on requestThrust compensation by opposed impellersTop-Top nozzle arrangement, other arrangements on requestMaterials of construction per API 610,other materials on request
Capacity 18 to 2,000 m /h(75 to 8,806 U.S. GPM)Head 150 to 1,000 m (492 to 3,281 ft)Discharge flange size 2 to 14 inMax. pressure 125 bar (1,813 PSI)Temperature 450°C (850°F)
APPLICATIONS
RefineriesOil fieldsPetrochemical plantsChemical plants
RUHRPUMPEN NOMENCLATURE
RON / RON-D
Horizontal Process PumpsTwo Stage
DESIGN FEATURES
Heavy duty process design according to API 610 latest edition (BB2 type)Ring oil lubrication, other methods of lubrication availableReplaceable wear rings for casing and impellerFan and water cooling availableCoke crusher design available for heatercharge services
3
9
OPERATING LIMITSCHARACTERISTICS
Axially split, horizontal multistagecentrifugal pumpNear-centerline mountedDiffuser casingSingle suction, enclosed impellerThrust compensation by opposedimpeller groupsSide-Side nozzle arrangementMaterials of construction per API 610,other materials on request
DESIGN FEATURES
Heavy duty process design according to API 610 latest edition (BB3 type)Ring oil lubrication, other methods of lubrication availableReplaceable wear rings for casing and impellerFan and water cooling available
Capacity 10 to 350 m /h(44 to 1,540 U.S. GPM)Head 100 to 1,000 m (325 to 3,280 ft)Discharge flange size 1 1/2 to 6 inMax. Pressure 130 bar (1,890 PSI)Temperature 205°C (400°F)
RUHRPUMPEN NOMENCLATURE
JTN
Horizontal Multi-stage Pumps (Diffuser)
APPLICATIONS
Power plantsRefineriesOil fieldsPetrochemical plantsChemical plants
3
10
3
CHARACTERISTICS
Axially split, horizontal multi-stagecentrifugal pumpNear-centerline mountedDouble volute casingSingle suction, closed impellerDouble suction impellers for higher flowsThrust compensation by opposedimpeller groupsSide-Side nozzle arrangementMaterials of construction per API 610,other materials on request
Capacity 50 to 3,000 m /h(220 to 13,209 U.S. GPM)Head 200 to 3,000 m (656 to 9,843 ft)Discharge flange size 3 to 14 inMax. Pressure 420 bar (6,000 PSI)Temperature up to 205°C (400°F)
OPERATING LIMITS
RUHRPUMPEN NOMENCLATURE
SMSM I
Horizontal Multi-stage Pumps (Volute)
DESIGN FEATURES
Heavy duty process design according to API 610 latest edition (BB3 type)Ring oil lubrication, other methodsof lubrication availableReplaceable wear rings for casingand impellerSleeve / Tilt Pad bearings design availableFan and water cooling available
APPLICATIONS
Oil fields and terminalsCrude oil and oil product pipelinesWater pipelinesFluid injectionHigh pressure servicesPower plants
CHARACTERISTICS
Radially split, horizontal multi-stagecentrifugal pumpCenterline mountedDiffuser casingSingle / Double suction, enclosed impellerThrust compensation by balance drum orrotor design with opposed impellers availableTop-Top nozzle arrangementMaterials of construction per API 610,other materials on request
OPERATING LIMITS
Capacity up to 2,000 m /h(8,806 U.S. GPM)Head up to 4,572 m (15,000 ft)Discharge flange size 2 to 12 inMax. Pressure 420 bar (6,000 PSI)Temperature 450°C (850°F)
APPLICATIONS
HydrocarbonsChemical solutionsWaterSeawaterDecoking Jet serviceCharge pumpsDescaling service pumps
Multi-stage Barrel Pumps
DESIGN FEATURES
Heavy duty process design according to API 610 latest edition (BB5 type)Ring oil lubrication, other methodsof lubrication availableCartridge pull out design availableSleeve / Tilt Pad bearings design availableReplaceable wear rings for casing and impellerAlternate nozzle arrangements availableFan cooling availableSpecial design for decoking service availableLow NPSH double suction design available
RUHRPUMPEN NOMENCLATURE
AADCADSLAB
11
3
12
VerticalTurbine Pumps
CHARACTERISTICS
Multistage vertical centrifugal pumps withdiffuser type bowlSemi-Open / enclosed impellersCounterclockwise rotation viewed fromcoupling endBasket or conical strainer, according topump requirements
OPERATING LIMITS
Capacity to 13,636 m /hr (60,000 U.S. GPM)Head to 762 m (2,500 ft)Pressure to 74 bar (1,080 PSI)Temperature 121°C (250°F)
APPLICATIONS
Deep WellIrrigationSumpCondensateCan pump requirements
Fire serviceMunicipalIndustrial
RUHRPUMPEN NOMENCLATURE
VTPHQ
DESIGN FEATURES
API 610 latest edition construction available (VS1 type)Product or oil lubricatedOversized bowl shaft sizing for longer lifeEpoxy coated bowlsCollet mounted impellers
STANDARD CONSTRUCTION MATERIALS
BowlsCast iron bowlsBronze impellers416 SS shaftingIntegral cast wear surfaces with optional wear rings in bronze or SSOptional materials available on request
ColumnsCarbon steel pipe – threaded or flangedAISI–1045 carbon steel or 416 SS line shafting Optional materials available on requestDischarge Head Cast Iron with 125# ANSI FF flangesFabricated steel with 150# or 300# ANSI flanges (optional)Optional custom fabricated discharge head to meet your criteria Bearing MaterialBronze as standardOther materials and configurations available as options
3
VTP
SUBMERSIBLE VTP
1
3
CHARACTERISTICS
Single stage vertical, centrifugal,double voluteDouble suction enclosed impellerCounterclockwise rotationviewed from shaftAvailable as a low NPSH first-stage for other vertical models
Heavy-Duty,Double Suction,Vertical ProcessPump
DESIGN FEATURES
API 610 latest edition construction available (VS2 type)Above or below base discharge.Oil lubricated column, or may be force-lubricated by the pumped liquid
APPLICATIONS
Cooling towers and otherapplications requiring large volumes of liquid with relatively high headRaw water intake
OPERATING LIMITS
Capacity 340 to 18,170 m /h (1,500 to 80,000 GPM)Head 12 to 244 m (40 to 800 ft)Discharge flange size 10 to 48 inMaximum Pressure 19 bar (280 PSI)Temperature150°C (302°F)
RUHRPUMPEN NOMENCLATURE
DSVDX
STANDARD CONSTRUCTION MATERIALS
Liquid End: cast iron with bronze impellersColumn: carbon steel pipe and shaftDischarge Head: carbon steel with150 and 300 ANSI flangesOther materials available upon request
14
3
Vertical AxialFlow Pumps
CHARACTERISTICS
Multi-stage vertical centrifugal pump,diffuser type bowlAxial flow impeller, high efficiencyHandles solids up to 36 cm diameter (14 in)Counterclockwise rotation viewed fromshaft coupling
OPERATING LIMITS
Capacity to 72,680 m /h(320,000 U.S. GPM)Head 27 m (90 ft)Pressure 5 bar (75 PSI)Temperature 95°C (230°F)
DESIGN FEATURES
API 610 latest edition construction available (VS3 type)Above or below base dischargeDischarge elbows designed toreduce friction losses, diffusersdesigned to minimize turbulenceand increase efficiencyProduct, oil, or fresh water lubricationRotor ‘Pull-Out’ design available
APPLICATIONS
All applications that require largequantities of water with low head,like drainage, wastewater,flood control, irrigation, wastetreatment plants, underpass drainage,condenser cooling, constructiondewatering, ditch pumps and rawwater intakes
RUHRPUMPEN NOMENCLATURE
VAFPOV
STANDARD CONSTRUCTION MATERIALS
Bowls: Cast iron with bronze impellerColumn: Carbon steel with AISI-1045 shaftDischarge head: Fabricated steel
OPTIONAL ACCESSORIES
Basket type strainerExtended Suction bell to minimize vortices
PVPMR
VPOPVD
15
3
Sump Pumps
APPLICATIONS
WaterHydrocarbonsProcess waterRiver waterChemical solutions
CHARACTERISTICS
Vertical arrangementSumpSingle suctionSingle stageAPI 610 latest edition construction available (VS4 type)
RUHRPUMPEN NOMENCLATURE
VSPVSP CHEM
OPERATING LIMITS
Capacity 3 to 1,931 m /h (10 to 8,500 U.S. GPM)Head 3 to 130 m (10 to 425 ft)Max. Pressure 40 bar (580 PSI)Temperature 200°C (400°F)
16
3
CHARACTERISTICS
Double suction first stage availableLow NPSH “Shockless Entry” firststage impellerOver 700 vertical Ruhrpumpen pump hydraulics can be used for constructionIntegral fabricated column support bearingsCollet or ring and key impeller mountingOne-piece shaft construction for shaftlengths to 6 m (20 ft)Rigid 4-piece couplingSingle or double suction first stageSingle stage or multistage availableNozzles are available with the suctionin the head or barrel
VerticalBarrel Pumps
Section IX code qualified welders forAPI applicationsFabrications designed in accordance with PED (Pressure Equipment Directive) and national standards when required
DESIGN FEATURES
API 610 latest edition construction available (VS6 type)Fabrications manufactured using ASME
Wide range of hydraulic designsto suit all applicationsChoice of bearings and mechanical sealsPump mounted thrust bearing when requiredTank or sump mount options available
APPLICATIONS
CondensatePower plantsMunicipalHydrocarbonsPipelineRefineriesMolten Salt Applications
OPERATING LIMITS
Capacity to 25,000 m /hr (110,000 U.S. GPM)Head to 1,500 m (4,921 ft)Pressure to 102 bar (1,493 PSI)Max. Temperature 600°C (1100°F)VMT Min. Temperature -196°C (-320°F)Horsepower 3,000 kW (4,000 hp)
3
RUHRPUMPEN NOMENCLATURE
VLT VMT
17
18
APPROVAL
APPLICATIONS
Pre-Packaged Fire Systems
DESIGN FEATURES
Ruhrpumpen’s horizontal and vertical fire pumps are listed by Underwriter’s Laboratories Inc and approved by Factory Mutual
NFPA-20UL-448FM-1311FM-1312Special design available on request
Commercial centersHigh rise buildingsOil & gas onshore and offshore platformsPower stationsManufacturing and chemical industries
CHARACTERISTICS
Electric motor or diesel engineMain and jockey pumps and controller mounted on a common baseComplete equipment compatibilityReduced field cost installationInterconnection wiring in accordance with area classificationsDelivered to site in a single shipmentFactory piped suction, discharge and test pipe line manifolds (optional)Fuel tank into the common base with fuel lines (optional)System is totally wired and tested
19
VerticalFire PumpsPumps Listed forFire Protection Service
APPROVALS
Ruhrpumpen’s vertical turbine fire pumps are listed by Underwriter’s Laboratories Inc and approved by Factory Mutual
CHARACTERISTICS
Number of stages will be designed upon pressure requirementsEnclosed impellers, single suctionCounterclockwise rotation viewed from coupling endColumn lengths in accordance with applicationsColumn pipe threaded construction is standardOpen line shaft construction is standardLarge bowl shaft sizing provides longer lifeStandard materials discharge head and bowls are Cast Iron. Impellers, rings and other internal in bronzeSpecial materials for discharge head, columns, shafts, bowls, impellers, rings on requestFabricated base capable of supporting the weightof pump diesel engine and gear drive
Complete packaged fire pump skids are availableDiesel engine starting. Electrical / pneumatic system available also
DESIGN FEATURES
APPLICATIONS
NFPA-20UL-448FM-1312Special design available on request
Commercial centersHigh rise buildingsOil & gas onshore and offshore platformsPower stationsManufacturing and chemical industries
20
HorizontalFire PumpsPumps Listed forFire Protection Service
NFPA-20UL-448FM-1311Special design available on request
Commercial centersHigh rise buildingsOil & gas onshore and offshore platformsPower stationsManufacturing and chemical industries
APPROVALS
Ruhrpumpen’s fire pumps are listed by Underwriter’s Laboratories Inc and approved by Factory Mutual
CHARACTERISTICS
Single stage double suction impellerSplit case design allows for service without disturbing the pipingDynamically balanced double suction Impellerto reduce thrust loadsClockwise or counterclockwise rotation (viewed from coupling side) available Grease lubricated bearingsStandard materials are cast iron case, bronzeimpellers & wear rings, other materials availableSpecial material for casing and internals on request Base fabricated steel capable of supporting the weight of the pump and driver, other base designsare available on requestComplete packaged fire pump skids availableDiesel engine starting electrical / pneumatic system
DESIGN FEATURES
APPLICATIONS
21
CentrifugalPumps, SingleStage, SingleSuction Design
OPERATING LIMITS
Capacity up to 2,800 m /h(12,340 U.S. GPM)Head up to 160 m (525 ft)Discharge flange size 6 to 16 inPressure up to 20 bar (298 PSI)Temperature up to 210°C (410°F)
CHARACTERISTICS
Radially split, horizontal, centrifugal pumpFoot or centerline mountedSingle volute casingSingle suction, radial, closed impellerThrust compensation by balance holesEnd-Top nozzle arrangement
RUHRPUMPEN NOMENCLATURE
SOSOM
APPLICATIONS
Cooling waterDrinking waterSea waterFire pumpSOM as hot water pump
3
22
3
CHARACTERISTICS
Radially split, vertical foot mountedcentrifugal pumpVolute casing with double suction impellerDouble suction, radial, closed impellerThrust compensation by doublesuction impellerSide-Side nozzle arrangement
APPLICATIONS
Main bilge pump on floating docks
FloatingDock Pumps,Single Stage
OPERATING LIMITS
Capacity 170 to 6,000 m /h(750 to 26,500 U.S. GPM) Head 3 to 20 m (10 to 66 ft) Discharge flange size 12 to 28 inPressure up to 5 bar (71 PSI) Temperature up to 40°C (104°F)
RUHRPUMPEN NOMENCLATURE
ZVZ
23
OPERATING LIMITS
CHARACTERISTICS
Radially split centrifugal pump.Single or multi-stageDiffuser casingSingle suction segmental.
Capacity 20 to 300 m³/h (88 to 1,320 U.S. GPM)Head 25 to 160 m (82 to 525 ft) Discharge flange size 12 to 28 inMaximum Pressure up to 20 bar (71 PSI)Temperature up to 40 °C (104 °F)
APPLICATIONS
Wash-down pumps in floating docksFire protection service
RUHRPUMPEN NOMENCLATURE
LVZ
Floating DockPumps, Singleor Multi-Stage
24
CHARACTERISTICS
Non-clogging / Non-stringing single-channel impellerBack pull out designCasing with a cleaning opening andreplaceable wear plateImpeller with a large waterway andvanes on the front and back shroudShaft sealing with a special waste waterseal or a mechanical seal
RUHRPUMPEN NOMENCLATURE
ESK
Horizontal Centrifugal Pumps with Single-Channel Impeller
OPERATING LIMITS
Capacity 70 to 2,000 m /h(308 to 8,820 U.S. GPM)Head 4 to 35 m (13 to 115 ft)Discharge flange size 5 to 14 inPressure up to 4 bar (56 PSI)Temperature up to 80°C (176°F)
3
APPLICATIONS
Municipal and industrial raw wastewaterCombined sewage and rain waterWastewater pumping stations
25
CHARACTERISTICS
Horizontal or verticalSingle suctionSingle stageClog-Free impeller designTwo channel pot impellerBearing bracketRadially splitTangential Discharge Nozzel
OPERATING LIMITS
Capacity up to 8,000 m /h(35,223 U.S. GPM)Head 3.5 to 32 m (11 to 115 ft)Pressure up to 4.5 bar (65 PSI)Temperature up to 80°C (176°F)
RUHRPUMPEN NOMENCLATURE
STSTVAPPLICATIONS
SewageRain waterSludge
Two ChannelImpellerCentrifugalPumps
3
26
CHARACTERISTICS
VerticalSingle suctionSingle stageSubmersible motor
OPERATING LIMITS
Capacity 300 to 18,000 m /h(1,320 to 79,344 U.S. GPM)Head 2 to 50 m (6 to 165 ft)Pressure up to 7 bar (99 PSI)Temperature up to 40°C (104°F)
3
APPLICATIONS
WaterRain waterCombined sewageSea waterCooling waterSludge
RUHRPUMPEN NOMENCLATURE
STT (Volute casing)PVT (Propeller pump, only for clean water)TRT (Mixed flow, only for clean water)LKT (Mixed flow)
SubmersiblePumps
27
Single Stage,Single SuctionMixed FlowPumps
CHARACTERISTICS
Single stageSingle suctionSemi-axial enclosed impellerAntifriction bearingsMixed flow pump
OPERATING LIMITS
Capacity up to 14,000 m /h(61,700 U.S. GPM)Head up to 45 m (147 ft)Pressure up to 4.4 bar (64 PSI) Temperature up to 40°C (104°F)Discharge flange size 10 to 40 in
APPLICATIONS
SD & SDV:Cooling waterGeneral waterDrinking waterRain waterSea water
SK & SKV:SewageWastewater
RUHRPUMPEN NOMENCLATURE
SDSDVSKSKV
3
28
OPERATING LIMITS
Capacity 250 to 3,000 m /h(1,100 to 13,220 U.S. GPM)Head 2 to 20 m (6 to 131 ft)Temperature up to 60°C (140°F)Pressure up to 1.9 bar (28 PSI)
3
APPLICATIONS
WastewaterCombined sewageRain waterFecal matterSludge
RUHRPUMPEN NOMENCLATURE
SKO
HorizontalPumps withThree-ChannelImpeller
CHARACTERISTICS
Horizontal or vertical mountedSingle suctionSingle stageRadially split casingThree-Channel impellerBearing bracket
29
CHARACTERISTICS
Horizontal or verticalSingle stageEnclosed impeller
OPERATING LIMITS
Capacity 18 to 1,590 m /h(80 to 7,000 U.S. GPM)Head 1.8 to 42 m (6 to 140 ft)Temperature up to 120°C (248°F)Pressure up to 4.4 bar (64 PSI)
APPLICATIONS
WaterWastewaterRiver waterRain water
Solid HandlingPumps
RUHRPUMPEN NOMENCLATURE
SHDSump Pump
3
30
LS BargePump
CHARACTERISTICS
Vertical self-contained pumpPrimary self-priming 1st stage impellerCapable of handling air and product for efficient strippingVertical unit requires minimal spaceHandles large variety of petroleum distillates and sea water during offloading process
Efficient function under adverse stripping phaseNo need for auxiliary vacuum pump to maintain primePollution prevention design system to minimize costly product clean upBroad range of metallurgies available for special applications
LS Barge Pump
APPLICATIONS
OPERATING LIMITS
RUHRPUMPEN NOMENCLATURE
DESIGN FEATURES
Capacity 182 to 1,136 m³/h (800 to 5,000 GPM)Head 12 to 91 m (40 to 300 ft)Max. viscosity 48 cSt (1,500 SSU)Max. temp. 74 °C (165 °F)
Ballast operationTransfer petroleum distillates including gasoline, fuel oils, light lubricants, someheavy oils (not to exceed 48 sCt (1,500 SSU))Barge Stripping / Dewatering
31
CryogenicPumps
OPERATING LIMITS
Capacity 3 to 3,000 m /h(10 to 13,200 U.S. GPM)Head 6 to 1,152 m (26 to 370 ft)Max. pressure 145 bar (2,105 PSI)Temperature -196°C (-320°F)
CHARACTERISTICS
Vertical arrangementAPI 610 latest editionSpecial sealing systemLow temperature designConstruction materials for CryogenicapplicationsVLT single or multi-stageSVNV single stage
APPLICATIONS
Liquid nitrogenLiquid oxygenCryogenicHydrocarbons
RUHRPUMPEN NOMENCLATURE
VLT CryogenicSVNVVLTV
3
32
Vertical Turbine Generators
RUHRPUMPEN NOMENCLATURE
VTG
CHARACTERISTICS
Multi-stage vertical centrifugal pump, which can also be used as a Turbine Generator Enclosed and open impeller availableBearings are product lubricatedDifferent types of turbines for different operation conditionsAvailable for sump or closed system applications
APPLICATIONS
Hydroelectric generatorsIndustrial systemsWater transportation systems DamsReverse OsmosisOil supply systemsChemical & petrochemical processesCryogenic closed systems
DESIGN FEATURES
Semi-open runners which are axially adjustable from the operating floor levelGood efficiency and good choke-flow characteristicsDischarge may be open into a sump, or into a barrel in a closed systemAPI 610 latest edition construction available
3
VTGVTG
CRYOGENIC
OPERATING LIMITS
Capacity up to 6,626 m /h(29,174 U.S. GPM)Head to 1,067 m (3,500 ft) Pressure up to 105 bar (1,523 PSI) Temperature -185 to 121°C (-300 to 250°F) Depending on materials and size of the turbine; higher pressures or head are possible, please contact Ruhrpumpen
3
APPLICATIONS
High-pressure cutting water
CHARACTERISTICS
Horizontal arrangementMultistage, single suctionBarrel typeCalculated, designed, and manufactured for the demands of the customer Heavy duty process design according to API 610 latest edition (BB5 type)Full pull-out cartridge design available
OPERATING LIMITS
Capacity up to 400 m /h (1,760 U.S. GPM)Head up to 4,000 m (13,120 ft)Speed according to requirementTemperature up to 150°C (302°F)Higher heads base on requirements
RUHRPUMPEN NOMENCLATURE
Hydraulic Decoking system
HydraulicDecoking JetPumps
ADC
33
HydraulicDecokingSystem
CROSSHEAD WITH DRILL STEM DRIVE
Crosshead DesignStandard components of heavy duty industryGuide railsWheelsFree fall aresstorDouble block
Functional testSimmulation of broken rope
Drill Stem Drive DesignStandard Components of heavy duty industryMain gear, grease lubricatedAuxiliary gear, oil lubricatedPacking cartridgeEngine with hydraulic, electric, or pneumatic drive
High torque at the drill stemHigh gear ratioMain gear without sealing at the Drill StemControlMeasurement of torque and speed at the drill stemManual override for max. torque (optional for hydraulic systems)
Favorable MaintenanceCartridge system
Test condition of Drill Stem DriveHydro Test 525 bar (7,800 PSI)Functional test 15 rpm at 350 bar (5,200 PSI)Measurement Torque Leakage
HOIST HYDRAULIC DRIVEN
PerformancePull Force4,500 kg (9,912 lb)Compact designLow noise
Pull speed (Hoist)Up to 70 m/min (230 ft/min)
34
RUHRPUMPEN SERVICE CENTERS
USA, TULSAPhone: +1(918) 624-2317
USA, HOUSTONPhone: +1(713) 910-2225
USA, BATON ROUGEPhone: +1(225) 753-6848
GERMANY, WITTENPhone: +49 (2302) 661-03
MEXICO, MONTERREYPhone: +52 (81) 8158-5500
MEXICO, CELAYAPhone: +52 (461) 611-5466
MEXICO, SAN LUIS POTOSIPhone: +52 (444) 812-1000
MEXICO, COATZACOALCOSPhone: +52 (921) 21-44636
CANADA, EDMONTONPhone: +1 (780) 461-6265
ARGENTINA, BUENOS AIRESPhone: +54 (11) 4115-7867
EGYPT, SUEZPhone: +20 (62) 336-5557
35
USA, VIRGINIAPhone: +1(757) 325-8484
36
RUHRPUMPEN PLANTSRUHRPUMPEN GmbHStockumer Strasse 2858453 Witten/Germany P.O. BOX 630958432 Witten/GermanyPhone: +49 (2302) 661-03
With every project you can count on QUALITY, SERVICE, EXPERTISE, INNOVATION, and COMPETITIVENESS.We are committed to serving our customers, the community, and the world.
We are Ruhrpumpen, the specialist for pumping technology!
RUHRPUMPEN S.A. de C.V.Niquel No. 9204Ciudad Industrial MitrasGarcia, N.L. Mexico 66000Phone: +52 (81) 8158-5500
RUHRPUMPEN Inc.4501 South 86th East Ave. Tulsa, OK 74145 USAPhone: +1 (918) 627-8400
RUHRPUMPEN Inc.9660 Haigh Drive Orland , CA 95963 USAPhone: +1 (530) 865-7867
RUHRPUMPEN EgyptSalah Nessem St. CrossSuez. Egypt 43511Phone: +20 (62) 336-5557
RUHRPUMPEN S.A.Oliden 3177-81 / C1439FNGBuenos Aires, ArgentinaPhone: +54 (11) 4115-7867
www.ruhrpumpen.com
email: [email protected]
More Information:
RUHRPUMPEN PLANTS
USA,Tulsa & Orland
GERMANY, Witten
MEXICO, Monterrey
EGYPT, Cairo
ARGENTINA, Buenos Aires
INDIA, Chennai
BRAZIL, Río de Janeiro
www.ruhrpumpen.com
email: [email protected] February.2012
RUHRP MPENU