SPECIALISED AND CUSTOMISED ENGINEERING …SPECIALISED AND CUSTOMISED ENGINEERING SERVICE...
Transcript of SPECIALISED AND CUSTOMISED ENGINEERING …SPECIALISED AND CUSTOMISED ENGINEERING SERVICE...
SPECIALISED AND CUSTOMISED ENGINEERING SERVICE
TEL +27 21 930 9360FAX +27 21 930 9364
UITZICHTTYGERBERG OFFICE PARK163 UYS KRIGE DRIVEPLATTEKLOOF 7500
APPROACH
We ensure that projects are delivered on time, within budget and to a high standard.
Methodology
EKCON has a pro-active approach to project execution. The continued involvement of a partner is maintained throughout all phases of a project, from the first briefing to the final handover, providing a most efficient, direct and prompt service. Technical staff is brought into a project from inception and remains on the project throughout the project duration.
Philosophy
The partners do not stereotype a project, but investigate all possible alternatives applying theoretical knowledge and expertise in an innovative manner. All design considerations are taken into account from the outset to ensure accurate cost control and estimates. For all projects, large or small, the firm’s policy is to communicate on a personal level and provide an advisory service relating to every project even after completion.
CLIENTS
DIRECTORS
Andre Ekermans
Addy van der Lugt
Anton EngelbrechtHennie Kartens
Alex Meyer
Erik Raimond
Wim Kleinhans
Martin Woudberg
Piet Coetzee
| Hons B Eng (Civil) | Graduated in 1978 at the University of Stellenbosch. He is a member of the South African Association for Consulting Engineers and specialises in structural design with emphasis on reinforced and post-tensioned concrete.
| Pr Eng Hons B Eng, MSc(CAL) | Graduated in 1978 at the University of Stellenbosch and obtained a Masters degree from the University of California (Berkley) in 1983. He specialises in structural design with emphasis on reinforced and post-tensioned concrete.
| Pr Tech Eng (NHD Civil Engineering) | Obtained his diploma at the Cape Technikonin 1988. He specialises in structural design with emphasis on reinforced and post-tensioned concrete.
| Pr Eng (Msc Eng) | Alex Meyer is a qualified mechanical engineer with a Masters’ degree in engineering. He received his B.Eng (Mech) degree in 2002. He was nominated for the ‘Best Final Year Project’ in which the development of a device whereby the smoke opacity exiting the exhaust of a vehicle could be measured, was designed.
| B Eng (Civil) | He obtained a B Eng degree in Civil Engineering at the University of Stellenbosch in 2005. In 2006 he started working as a junior site engineer for a large construction firm where he gained invaluable site experience before he joined EKCON in 2007.
| Pr Tech Eng (B-tech, Civil) | Obtained his B-Tech degree at the Cape Technikon in 1999. He specialised in the design of civil engineering services and roads for infrastructure projects and building related projects.
| Pr Eng, B Eng Hons | Graduated in 1982 at the University of Pretoria. He specialises in project management, design and documentation of roads and civil engineering services. He has been Project Manager for various large industrial and road maintenance projects.
| B Eng, Hons B.B&A | Obtained his degree in 1989 at the University of Stellenbosch. He specialises in mechanical building services.
| Pr Eng (Hons B Eng) | Obtained his degree at the University of Stellenbosch in 1979. He specialises in structural design with emphasis on structural steel design.
The directors play an active role in the day to day activities and the firsthand production of designs and documentation of projects. They are personally committed to ensure that projects are delivered on time, within budget and to a high standard.
Front Row: Erik Raimond, WasiefCasper, Martin Woudberg, André Ekermans, Anton Engelbrecht, Addyvan der Lugt, Piet Coetzee, WimKleinhans
Second Row: Reza Davids, KautharSemaar, Melani Hunter, Ronalda Basson, Kirsty Taylor, Ismail Leeman, Alex Meyer, Jurie Fick, Marcelle Lourens, HesnaMarais, Lizeka Makinana, Chris Roux
Third Row: Michael Mulder, Mark Chinnian, George Minnaar, Pieter de Waal, Johan Nel, Pierre Terblanche, Reuben Campbell, Renoir Maasdop
Back Row: Riaan Davids, Charl van Wyk, Elmar Bergakker, Neil de Waal and Rikus Steyn
TEAM
EXPERTISE
DISCIPLINES
Structural EngineeringDesign and documentation of reinforced concrete and post-tensioned applications including civil structures, deep basements, structural rehabilitation and marine structures. We also specialize in the design of structural steel structures for the commercial, industrial and telecommunications industries.
Mechanical EngineeringFull building services design and documentation, procurement, site super-vision and quality control.• HVAC• Wet services for buildings• Rational Fire Design• Lifts and Escalators
Civil EngineeringDesign and documentation of bulk earthworks, civil engineering services such as sewer, storm water drainage, water supply reticulation for residential and industrial township developments as well as retail, commercial and residential building developments.
Project EngineeringTotal management of all aspects of project development including the co-ordination and administration of design and construction activities, financial and programming control and quality assurance.
EXPERTISE
ADDITIONAL DESIGN SERVICES
Industrial and ProductionDesign and execution of multi-disciplinary industrial projects, including textile, electronic, chemical, food and general factories, wine cellars and recreational facilities. This includes conceptual planning, building design, engineering design, co-ordination, project and construction management as well as financial control.
Wet ServicesThis includes the design of internal plumbing and drainage systems for various buildings inclusive of shopping centres, hotels, residential complexes and office buildings. We have extensive expertise in the design of hot water generation plant to meet the criteria for energy efficient buildings.
Lifts and EscalatorsTraffic studies and performance specifications for lifts in a variety of building types to meet the architects designs. It also meets the building population requirements.
HVACEconomical energy efficient design of HVAC services for variety of buildings.
Rational Fire DesignOur extensive expertise in this field enables us to assist architects and building designers to produce safe, economical and practical buildings within their aesthetic requirements. Fire fighting services include design for all types of buildings including warehouses and distribution facilities.
FEATURED PROJECTS
Civil Engineering
Weetbix
CLIENT: Bokomo Pioneer FoodsLOCATION: AtlantisSIZE: 15 000 sqmCOMPLETED: 2011
DISCIPLINES: Civil Engineering, Industrial and Production Facilities, Structural Engineering
CLIENT: VodacomLOCATION: Bellville, Cape TownSIZE: +/- 23 000 sqmCOMPLETED: 1998
DISCIPLINES: Civil Engineering, Structural Engineering
Techno Centre
Commercial Buildings
Upper East Side
CLIENT: Swish PropertiesLOCATION: Woodstock, Cape TownSIZE: 40 000 sqmCOMPLETED: 2011
DISCIPLINES: Commercial Buildings, HVAC, Mechanical Engineering, Rational Fire Design, Wet Services
Damen Shipyard Head Office
CLIENT: DamenLOCATION: Cape Town HarbourSIZE: 1 100 sqmCOMPLETED: 2014
DISCIPLINES: Industrial and Production Facilities, Mechanical Engineering, Structural Engineering
FEATURED PROJECTS
Mechanical Engineering
Kalahari Mall, Upington
CLIENT: Retail AfricaLOCATION: UpingtonSIZE: 30 000 sqmCOMPLETED: 2013
DISCIPLINES: Commercial Buildings, Mechanical Engineering, Rational Fire Design, Wet Services
CLIENT: MelbroLOCATION: Epping, Cape TownSIZE: 6 000 sqmCOMPLETED: 2010
DISCIPLINES: Civil Engineering, Mechanical Engineering, Structural Engineering
Parker Park
Structural Engineering
Mouille Point Apartments
CLIENT: PrivateLOCATION: Mouille Point, Cape TownSIZE: Retail, 6 Apartments, Penthouse, +-2 800sqmCOMPLETED: 2016
DISCIPLINES: Civil Engineering, Residential Development, Structural Engineering
Christiaan Barnard Hospital
CLIENT: NetcareLOCATION: Foreshore, Cape TownSIZE: 25 000sqmCOMPLETED: 2016
DISCIPLINES: Civil Engineering, Health Education and Sport Facilities, Structural Engineering, Wet Services
2010 CMA AWARDConcrete Manufacture Association of Excellence
2015 PMR Africa Award Silver Arrow Structural Consulting Engineers Outstanding First OverallPMR Africa Award Golden Arrow Structural Consulting Engineers Outstanding First Overall
2012 CARTE BLANCHE Awarded a certificate of Appreciation for King Edwards VIII Hospital ProjectPMR Africa Award Combined Civil and Construction Consulting Engineers Outstanding 1st OverallPMR Africa Award Civil Consulting Engineers Outstanding 1st OverallPMR Africa Award Civil Consulting Engineers Outstanding 1st Overall
2016 PMR Africa Award Silver Arrow Structural Consulting Engineers Outstanding First OverallPMR Africa Award Golden Arrow Structural Consulting Engineers Outstanding First Overall
2013 PMR Africa Award Diamond Arrow Combined Civil and Structural Consulting Engineers Outstanding First OverallPMR Africa Award Diamond Arrow Consulting Engineers Outstanding First OverallPMR Africa Award Diamond Arrow Structural Consulting Engineers Outstanding First Overall
2017 PMR Africa Award Combined Civil and Structural Consulting Engineers 1st OverallPMR Africa Award Civil Consulting Engineers 1st OverallPMR Africa Award Structural Consulting Engineers 1st Overall
2014 PMR Africa Award Diamond Arrow Combined Civil and Structural Consulting Engineers Outstanding First OverallPMR Africa Award Diamond Arrow Civil Consulting Engineers Outstanding First Overall
AWARDS
CONTACT DETAILS
WEBSITEwww.ekcon.co.za
TEL +27 21 930 9360FAX +27 21 930 9364
EKCON (PTY) LTDTrading asEKCON Engineers & Project Managers
ADDRESSUITZICHTTYGERBERG OFFICE PARK163 UYS KRIGE DRIVEPLATTEKLOOF7500
GPS COORDINATES -33.886556, 18.599221