SPECFICATION & ESTIMATION OF THE PROPOSED

CONSTRUCTION OF A RESIDENTIAL BUILDING AT

Rs. 1800 per SQ.FT.

FOUNDATION:

The foundation shall be designed for

THREE floors; the type of foundation (Isolated

column footing) shall be made as per the design

given by the Structural Engineer which will be

based on the soil condition. The soil will be

tested to ascertain load bearing capacity and

accordingly foundation will be designed.

Note: If the soil type is loose sand, loose

gravel or clay, Foundation design will be

changed. Based upon the design of foundation,

the cost of foundation shall be charged as

additional cost.

BASEMENT:

The minimum basement

height shall be maintained to 3.0

feet from existing Natural Ground

level. The earth filling for the

basement height up to 3.0 feet shall be

made from the existing ground level. For the basement filling good quality filling

sand will be used. Plinth and Backfilling area shall be filled with good quality

filling sand or with Quarry dust (compacted evenly

throughout the area).

FLOORING:

PCC will be laid over the compaction, Plinth area

shall be provided with concrete floor or Paver blocks

will be laid over the compacted set-back area.

STRUCTURE:

RCC framed Structure

will be as per seismic zone 3

designs and the outer walls of

the building shall be 9" thick

brick work and internal wall of

the building shall be 9” or 4.5"

thick brick work. Fired Clay

bricks will be used for the

brick work. The lintel levels

are 7’0” height from the floor

level and the roof height shall

be 10’0” (Including roof slab

thickness).

Parapet wall shall be 9 “thick

brick work and 3.0 feet height (Provided with canopy rings). Providing and applying

12mm thick cement plaster.

FLOOR HEIGHT:

Stilt floor height shall be 2.5 meters

(8’2.42”) and all other floor height shall be

3.0 (10’0”) meters including the roof slab

thickness. Top floor height shall be 2.75

meters (8’4.5”). Total height of the proposed

building shall be 8.5 meters (9’10.11”).

(Excludes: Basement rise, Head room and

parapet wall)

Note: Floor heights are Subject to

CMDA Clearance.

CONCRETE GRADE:

Concrete grade M20 will be used for the columns, beams and roof slab as per the

structural engineer’s design.

(i) Cement:

RCC:-

For roof slab OPC 53 grade of high

quality cement of any brand will be

used. The price may starts from

Rs.390/ bag.

For Other structural elements like

Beam, Column & Lintel cum sunshade, OPC 53

grade high quality cement any brand will be used. The price may starts from

Rs.360/ bag.

For Plastering and Brick work, PPC or OPC 43 grade of cement will be

used. The price may starts from Rs.360/ bag.

Steel:

Fe500 grade Thermo-

mechanically treated ribbed

high tensile strength steel of any

brand will be used.

CAR PARKING AREA:

Parking tile will be given for the flooring. Electrical and plumbing points will

be provided.

COMMON AREA:

Common area like Staircase and landing area will be provided with anti-skid

tile floor (Rs 35/sq.ft.).

HANDRAIL:

The support and railings in staircases will be of S.S hand Railing for one side

only.

FLOOR SPACE, FLOORING & WALL TILES:

Living room, Bedroom: Vitrified tiles (24x24inches Cost up to Rs.50/- per

Sq.ft) for entire area. Built in shoe rack and showcase in 9” wall.

(i) Kitchen:

Vitrified tiles ((24x24inches Cost up

to Rs.50/- per Sq.ft). Kitchen slab with

18mm granite top as per architect drawing

to accommodate space for mixer grinder,

microwave etc. (Cost of granite Rs.100/Sq.

ft) Vitrified Designer wall Tiles up to two

feet height above the kitchen slab. (Cost of

Tile Rs. 35/- Per Sq.ft.) Stainless sink with

10” depth will be provided. (Grade: SS 303).

(ii) Bathrooms and Washing area:

Vitrified Designer tiles up to 7’ height in Toilet area (Cost up to Rs 35/- Per

Sq.ft) and Anti-Skid flooring tiles. Providing and applying integrated cement based

waterproof plaster treatment to floor and wall of toilet blocks including grouting

with cement slurry along with the concrete work.

(iii) Terrace flooring:

Terrace slab waterproof shall be integrated cement

based waterproofing treatment and plaster treatment to

floor. Cement paste with waterproofing compound and

with traditional bricks bats / fine coarse aggregates

waterproof and temperature control method.

CARPENTRY:

Main door frame and shutter shall be provided with

Teak Wood melamine polished on both sides and

Hardware’s such as (Lever Handle Lock, Tower bolt,

Door Stopper, Eye piece and safety chain).

All other door frames will be of teak wood and

painted with designer

Flush Shutters and

Hardware’s such as

(Lever Handle Lock,

Tower bolt, Door

Stopper)

Windows frame

and shutters will be in UPVC Sliding doors with 4mm Plain Glass. Ventilator

Provision as per the design (UPVC) PVC frame and door shall be provided for the

toilet.

M.S FABRICATION:

Providing and fixing MS grill for window / ventilator of suitable size with 2

coats of synthetic enamel paint over a coat of primer.

ELECTRICAL:

Distribution boards and Cubicle panel of 16g board suitable three phase

connection and designed for termination of Incoming cables, outgoing cables wires

etc., with cable chamber box (Include all required hardware’s) at every unit of

“Standard” brand. Providing and fixing Earth link heavy of G.I pipe, No.8 SWG

copper wires for 5m- 10m and earth strip of size (25x3x0.5) m3 with necessary

insulators Concealed wiring will be provided for all the portions with ISI wires.

One Split A.C. point is provided in all Bedrooms and channeled typical routing.

Modular Switches shall be provided with Anchor.

Centralized cabling system for Telephone, Data and DTH in all Rooms. Telephone

point for each portion provided One Geyser and Exhaust point will be provided in

all bathrooms and Kitchen, Washing machine point in balcony.

Note Excludes: Cables and terminations to the main board (Payment towards

EB Govt.) Electrical Fittings.

PLUMBING:

C.P.V.C. SDR Pipes shall be used for all concealed work. U.P.V.C. Pipes for all

drainage lines. 4kg pipe for open lines and 6kg for concealed lines. 1000 liters PVC

overhead tank will be placed on the terrace.

Ball valve, CP (brass stop cocks heavy, brass bib c ocks 15mm dia.

short/long body heavy (with flange), S.S. grating 100mm, health faucet set,

bottle trap 15mm dia, etc.) Wall mixer, Angle cock, Taps, 2in1 Taps of required dia

and open (Conforming to IS: 8931, IS: 778- Class I, Parryware (basic quality) as per

requirement. E. W.C. white color wall mount, with tank shall be provided.

(Parryware of basic quality). Wall mounted basin (Parryware of basic quality).

PAINTING:

The Interior surface of all walls

(Asian Royale Emulsion). Applying

two coat of wall Putty, One coat of

wall primer and applying two coats

of Emulsion paint. The external

surface of walls, Ceiling etc. (Asian

Paints- Ace) Applying one coat of exterior primer and two coats of exterior emulsion

paint. Two Coat of synthetic enamel paint over a coat of primer for Window grills

and Gate.

OVERHEAD TANK:

PVC overhead tank of 1000 litres capacity will be

provided over terrace floor with proper support section.

SEPTIC TANK:

The septic tank of 5000 litres capacity with R.C.C. base

slab, side walls, two baffle walls and cover slab, and RCC

foundation will be provided over PCC 1:4:8 & Sand filling. Inlet and outlet

chambers, manholes and vent pipes are provided as shown in the sketch.

1000 litres

SOAK PIT:

The soak pit, consisting basically of a

simple pit will be provided for15 feet deep. It

will be located at a safe distance from a

drinking water source. The required number of

concrete earth chamber ring will be placed in

the pit. The pipe lines will be provided to the

kitchen and bathroom to collect the waste to pit.

SCOPE OF OWNERS:

Power supply during the entire process of construction.

Water supply during the entire process of construction.

EB Transform connection and main cable routing.

Any decorative works, (stone finish, cladding, glass items SS grills etc)

Any external development, (apart from work mentioned the cost).

Electrical fittings like fan, lights fitting and fixtures, Air conditioners

Water treatment plant if required