Spec 27G Plumbing Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m27-1

PLUMBING HARDWARE

Revised 05/31/16

CONTENTSThis section contains sinks, kitchen & lavatory fixtures and shower & bath fixtures. The lavatory and kitchen faucets are crafted in bronze. The faucet spouts are lined with NSF approved food-grade flexible tubing and assembled with lead-free brass alloy fittings (.25 percent or less as per AB 1953 Bill, California code).

All plumbing is subject to availability. Please call for lead time.

TABLE OF CONTENTS:

Faucet Knobs & Levers Page 27-2

Deck Mount & Wall Escutcheons Page 27-3

Drain Options Page 27-4

Kitchen Sinks Pages 27-5 – 27-6

Bar Sinks Pages 27-7 – 27-8

Self-Rimming Lavatory Sinks Page 27-9

Undermount Lavatory Sinks Pages 27-10 – 27-12

Vessel Sinks Pages 27-13 – 27-19

Faucets Pages 27-20 – 27-25

Shower Fixtures Pages 27-26 – 27-30

A` La Carte Shower & Faucet Components Pages 27-31 – 27-34

Tub Fillers Pages 27-35 - 27-36

ORDERING INSTRUCTIONS:

Plumbing Hardware: See Ordering Instructions in Binder 1/ Dealer Information. Custom Plumbing Hardware: See Custom Ordering Instructions in Binder 1/ Dealer Information.

Sun Valley Bronze highly recommends selecting Raw White Bronze (W), White Bronze (W1), Raw Silicon Bronze (S) or Silicon Bronze (S1) finishes for all plumbing hardware. W and S finishes can be cleaned with 0000 steel wool and clear paste wax. W1 and S1 finishes can be cleaned with a Scotch Brite pad, 0000 steel wool and clear paste wax. All other finishes are also available, however these are live finishes, which are affected by the use of harsh cleansers, beauty products and the environment causing them to change with time and use. Polished White Bronze (WP and Polished Silicon Bronze (SP) are available at a 20% upcharge over list price. We recommend cleaning with a Cape Cod Polishing Cloth. Sun Valley Bronze does not warranty the finish of our plumbing hardware. Refer to Section 1 Page 8 for Plumbing Finishes Disclaimer.

*Note: The official AB-1953 bill (effective July 1, 2010 ) regulates lead content for plumbing fittings and fixtures do not exceed more than 0.25 percent lead content within each component that comes into contact with the wetted surfaces of pipes and pipe fittings, plumbing fittings and fixtures.

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

27-2

Revised 05/31/16

Illustrations are for demonstration purposes only.

FAUCET KNOBS & LEVERS

Knobs and levers shown are available for plumbing ONLY.Please refer to Section 2 Knobs & Levers and Section 12 Screen Doors for other options. Any Sun Valley Bronze knob or lever is compatible with lavatory, tub and shower systems.

LF-21 Traditional Cross Knob

3 1/

4"3/4"

LF-97 Mini Ramona Lever

3 5/8"

2 3/

16"

1/4"

1"

LF-98 Contemporary Lever

3 1/16"

2 3/

8"

3/4"

3/4"

1"

LF-99 Olson Lever

5 7/16"

2 1/

4"

1/2"

1 1/

4"

LF-901 Cross Knob

3"

5/16" 5/8"

LF-904 Scallop Knob

2 1/

2"

1 15/16" 2 1/2"

1 1/

2"

7/8"

BF-902 Cross Bath Knob

3 1/

2"

5/16" 5/8"

K-228 Cross Knob

2 1/16" 4"

1/2" 5/8"



27-3

Revised 05/31/16

DECK MOUNT & WALL ESCUTCHEONSIllustrations are for demonstration purposes only. Any escutcheon is available.

Bell escutcheons. Specify escutcheon when ordering.

BELL-1001 – Olson tall widespread

faucet escutcheon.

2 1/2"1

1/2"

1 1/2"

2"

1 1/

2"

1 31/64"

BELL-1000 – Tall widespread faucet

escutcheon.

BELL-1002 – Traditional widespread

faucet escutcheon.

2 1/2"

2"

3/4"

Escutcheons shown are available for plumbing ONLY.Please refer to Section 3 Escutcheons for other options.Escutcheons can be mounted horizontally as long as width is at least 10” to accommodate 8” center-to-center escutcheon. When using separate escutcheons for 8” center-to-center, maximum escutcheon width is 2.5”.Wall lavatory and deck mount lavatory sets are 8” center-to-center.

BELL-1000 Tall widespread faucet escutcheon.

BELL-1001 Olson tall widespread faucet escutcheon.

BELL-1002 Traditional widespread faucet escutcheon.



27-4

Revised 05/31/16


DRAIN OPTIONS

DA-2 Cast bronze lift and turn drain and stopper.

3/4"

1 1/4"

2 3/16"

DA-3 Cast bronze perforated drain. No stopper.

2 3/16"

1 1/4"



27-5

Revised 05/31/16


Farmhouse sink.

FARMHOUSE KITCHEN SINK

Drain NOT included.Prep counter by using actual sink as template.The farmhouse sink weighs approximately 210 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.Compatible with standard drain basket and garbage disposal.

Available in S1 and W1 finishes ONLY.

SINK CROSS SECTION SIDE VIEW

2" 18"

Wall Thickness Appx 3/8"

10"

1 1/4"

1"

21 1/4"

SINK TOP VIEW

18"

1 1/

4"2"

31 1/2"

3 1/2" Drain

21 1

/4"

1 1/2" 1 1/2"28 1/2"

1 1/4"

9"

3 1/2"

SINK-3222FRM Farmhouse kitchen sink. 31 1/2” x 21 1/4” rectangular



27-6

Revised 05/31/16


UNDERMOUNT FARMHOUSE KITCHEN SINK

Undermount farmhouse sink.

Drain NOT included.Prep counter by using actual sink as template.The farmhouse sink weighs approximately 210 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.Compatible with standard drain basket and garbage disposal.

Available in S1 and W1 finishes ONLY.


18"


10"

1"

20 3/4"

SINK TOP VIEW

18"

31 1/4"

3 1/2" Drain20 3

/4"

28 1/2"

9"

3 1/2"

SINK-UM3222FRM Undermount farmhouse kitchen sink. 31 1/4” x 20 3/4” outside, 28 1/2” x 18” inside, rectangular



27-7

Revised 05/31/16


Bar sink.

BAR SINK

Drain NOT included.Prep counter by using actual sink as template.The bar sink weighs approximately 68 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.Compatible with standard drain basket and garbage disposal.

BAR SINK CROSS SECTION SIDE VIEW

1 3/8" 16 1/2"

Wall Thickness Appx 3/8"6"

1 3/8"19 1/4"

BAR SINK TOP VIEW

16 1

/2"

1 3/

8"1

3/8"

19 1/4"

19 1

/4"

1 3/8" 1 3/8"16 1/2"

3 1/2"

5 1/

2"

3 1/2"

BAR-16 Bar sink. 19 1/4” square



27-8

Revised 05/31/16


Apron bar sink.

APRON BAR SINK

Drain NOT included.Prep counter by using actual sink as template.The apron bar sink weighs approximately 110 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.Compatible with standard drain basket and garbage disposal.

17

.25"

1 1/

4"2"

20 1/2"

20 1

/2"

1 1/2" 1 1/2"20 1/2"

1/4"

2" 17 1/4"


10"

1 1/4"

1"

20 1/2"


SINK TOP VIEW

9 1/

4"

3 1/2"

Apron Face3 1/2"

APRN-2009 Apron bar sink. 20 1/2” square



27-9

Revised 05/31/16


Oval self-rimming sink.

OVAL SELF-RIMMING SINK

Self-rimming sink with integrated overflow.Matching bronze drain assembly included. Specify DA-2 or DA-3 (see page 27-4).Prep counter by using actual sink as template.The oval self-rimming sink weighs approximately 54 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.


SINK TOP VIEW

8 1/

2"

6 1/

2"

19 1/2"

13 3

/4"

19 1/2"

7"

3/4"

3/4"

1 1/4" 1 1/4"Rim

Appx 1 1/4"

OSR-1117 Oval self-rimming sink. Drain included. 19 1/2” x 13 3/4”



27-10

Revised 05/31/16


Oval undermount sink.

OVAL UNDERMOUNT SINK

A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.Matching drain assembly included with sink. Specify DA-2 or DA-3 (see page 27-4).Prep counter by using actual sink as template.The oval undermount sink weighs approximately 47 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.


SINK TOP VIEW

8 1/

2"

6 1/

2"

19"

13 1

/2"

Rim Appx 1 1/4"

19" 13 1/2"

7"

5/16

"

5/16

"

1 1/4" 1 1/4"

OUM-1117 Oval undermount sink. Drain included. 19” x 13 1/2”



27-11

Revised 05/31/16


TROUGH UNDERMOUNT SINK

Trough undermount sink.

24 1/2"

15 1

/2"

12 3

/4"

21 7/8"


SINK TOP VIEW

12 3/4"

6"

15 1/2"

1 1/4" Flange

5 3/

4"

3/8"

1 1/4"

1 1/4"

Matching drain assembly included with sink. Specify DA-2 or DA-3 (see page 27-4).Prep counter by using actual sink as template.The trough sink weighs approximately 60 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.

SINK-2415UM-TR Trough undermount sink. Drain included. 24 1/2” x 15 1/2” rectangular



27-12

Revised 05/31/16


ROUND UNDERMOUNT SINK

Round undermount sink.

Matching drain assembly included with sink. Specify DA-2 or DA-3 (see page 27-4).The round vessel sink weighs approximately 42 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.


SINK TOP VIEW

7 1/

2"

Wall Thickness Appx 0"

2 1/8"

18 1

/8" 15 1/8"

18 1/8"

5 3/

4"VS-16UM Round undermount sink. Drain included. 16”



27-13

Revised 05/31/16


Round vessel sink.

ROUND VESSEL SINK

Free-standing vessel sink.Matching drain assembly included with sink. Specify DA-2 or DA-3 (see page 27-4).The round vessel sink weighs approximately 42 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.


SINK TOP VIEW

6 1/

4"

16"

16"

5 3/

4"


1 1/4"

VS-16 Round vessel sink. Drain included. 16”



27-14

Revised 05/31/16


Square vessel sink.

SQUARE VESSEL SINK

Free-standing vessel sink.No drain required.The round vessel sink weighs approximately 48 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.

Wall Thickness Approx 3/8"


SINK TOP VIEW

5 1/

4"

18"

18"

4 3/

4"

1 1/4"

VS-18 Square vessel sink. No drain required. 18”



27-15

Revised 05/31/16


Lotus vessel sink.

13” LOTUS VESSEL SINK


SINK TOP VIEW

13"13

"

13"

App

x 6

1/2"

to in

side

rim

HOLE LAYOUT

4 1/4"

No drain required.The trough lotus weighs approximately 19 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.

SINK-LOTUS-13 Lotus vessel sink. No drain required. 13” round



27-16

Revised 05/31/16


16” LOTUS VESSEL SINK

Lotus vessel sink.

No drain required.The trough lotus weighs approximately 19 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.


SINK TOP VIEW

16"16

"

16"

App

x 6

1/2"

to in

side

rim

HOLE LAYOUT

5 1/4"

SINK-LOTUS-16 Lotus vessel sink. No drain required. 16” round



27-17

Revised 05/31/16


16” MOONSTONE VESSEL SINK

Moonstone vessel sink.

No drain required.The moonstone sink weighs approximately 70 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.


SINK SIDE VIEW

16"

9 1/

4"

16"

HOLE LAYOUT

5" 4"

VS-19 Moonstone vessel sink. No drain required. 16” round



27-18

Revised 05/31/16


Trough sink.

TROUGH SINK

No drain required.The trough sink weighs approximately 110 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.

24"

15"

12 3

/4"

21 7/8"


SINK TOP VIEW

12 3/4"


6"

15"

5 3/

4"

1"

1 1/4"

SINK-2415TR Trough sink. No drain required. 24” x 15” rectangular



27-19

Revised 05/31/16


Trough sink with drain.

TROUGH SINK w/DRAIN

24"

15"

12 3

/4"

21 7/8"


SINK TOP VIEW

12 3/4"


6"

15"

5 3/

4"

1"

1 1/4"

1 1/4"

Matching drain assembly included with sink. Specify DA-2 or DA-3 (see page 27-4).The trough sink weighs approximately 110 lbs. We recommend reinforcing the cabinet structure as required for sink installation.A variation in size of +/- 1/4” is possible in the sink due to the handmade and handcast nature of the product.

SINK-2415TR-DA Trough sink. Drain included. 24” x 15” rectangular



27-20

Revised 05/31/16


Deck mount goose neck kitchen faucet.

DECK MOUNT GOOSE NECK KITCHEN FAUCET

2 1/4"2 1/4"2 1/4"

3 1/16"

1"

3/4"

9 3/

4"

14 1

/4"

3 1/16"

2 1/

2"

7 3/4"

14 1

/4"

1"

S-000 – Kitchen sprayer w/hose and holder. – 1" diameter.

RAB-1 – Aerator.

1 5/16"

13/1

6"

SWE-11

5/8"

5 5/

8"

3 1/

2"1/

2"

1"

1"

2 3/

4"

1/4"

3/4"

EscutcheonHolder

Handle

2 1/4"

1 9/16"

Note: Kitchen faucets are hand cast from bronze.Faucets are lined with stainless steel or NSF approved tubing.Fittings meet California Law AB-1953.Lavatory faucets are supplied with “WaterSense” aerators have a standard flow of 1.5/gal per minute.All valves supplied by Sun Valley Bronze.Drain not included. For drain options see page 27-4.

For knob and lever options see Section 2 Knobs & Levers, Section 12 Screen Doors or Section 27 Plumbing.For escutcheon options see Section 3 Escutcheons or Section 27 Plumbing. When using separate escutcheons for 8” center-to-center, maximum width is 2.5”.

CS-KF01-RP-N925/LF-98Deck mount goose neck kitchen faucet shown w/RP-N925 escutcheons and LF-98 levers. Includes SWE-1 swivel assembly w/port for side spray (if needed).

RAB-1 Aerator (threads onto end of spout).

S-000 Kitchen sprayer w/hose and holder.



27-21

Revised 05/31/16


DECK MOUNT GOOSE NECK LAVATORY FAUCET

Deck mount goose neck lavatory faucet.

Note: Lavatory faucets are hand cast from bronze.Faucets are lined with stainless steel or NSF approved tubing.Fittings meet California Law AB-1953.Lavatory faucets are supplied with “WaterSense” aerators have a standard flow of 1.5/gal per minute.All valves supplied by Sun Valley Bronze.Drain not included. For drain options see page 27-4.

For knob and lever options see Section 2 Knobs & Levers, Section 12 Screen Doors or Section 27 Plumbing.For escutcheon options see Section 3 Escutcheons or Section 27 Plumbing. When using separate escutcheons for 8” center-to-center, maximum width is 2.5.”

10 3

/4"

3"

2 1/4"

1 1/

2"

5 3/4"

5/16

"3/

8"

11"

2 1/

4"

3"

RAB-1 – Aerator.

1 45/128"20

7/25

6"

CS-LF05-P-N925/LF-901 Deck mount goose neck lavatory faucet shown w/P-N925 escutcheons and LF-901 knobs.

RAB-1 Aerator (threads onto end of spout).



27-22

Revised 05/31/16


EVERLY DECK MOUNT LAVATORY FAUCET

Everly deck mount lavatory faucet.



9 1/

4"

1"6"

1/4"

2 1/4"2 1/4"2 1/4"

5 1/4"

3/4"

8"

1"

9 1/

4"

5 1/4"

2 1/

8"7/8"

9 1/

4"

3 1/

2"

s

CS-LF06-PN925/L-174SQ Everly deck mount lavatory faucet shown w/P-N925 escutcheons and L-174SQ levers.



27-23

Revised 05/31/16


OLSON DECK MOUNT LAVATORY FAUCET

Olson deck mount lavatory faucet.



4 1/

4"

1"6"

1/4"

2 1/2"2 1/2"2 1/2"

5 7/16"1 33

/128

"

8"

1"

5 7/16"

2 1/

4"1/2"

4 1/

2"2 1/

4"s

1 1/

2"

1 1/

4"

CS-LF07-BELL1001/LF-99 Olson deck mount lavatory faucet shown w/BELL-1001 escutcheons and LF-99 levers.



27-24

Revised 05/31/16


Wall mount lavatory faucet.

WALL MOUNT LAVATORY FAUCET

2 1/4"2 1/4"2 1/4" 8 3/8"

3 5/8"1"

8 3/

8"

2 3/

16"

4 1/4"1/4"

3 5/8"

1"

3/8"

8"

2 9/

16"



CS-WLF03-P-N925/LF-97 Wall mount lavatory faucet shown w/P-N925 escutcheons and LF-97 levers.



27-25

Revised 05/31/16


WALL MOUNT LAVATORY FAUCET

8"

2 1/

4"

3"

8 1/2"

1" 8"

Wall mount lavatory faucet.



CS-WLF04-P-N925/LF-901 Wall mount lavatory faucet shown w/P-N925 escutcheons and LF-901 knobs.



27-26

Revised 05/31/16


SHOWER SETS

Swivel showerhead.

Pressure balance valve PB-R: regulates flow, pressure, temperature and on-off control. Shown with L-106 lever. Thermostatic valve is available.

6 1/

2"

6 1/2"

6"

1"

6"

Front View Side View

6"

2 1/

2"Pressure balance valve allows 2.5 gal/minute maximum water flow.All valves supplied by Sun Valley Bronze.

For knob and lever options see Section 2 Knobs & Levers, Section 12 Screen Doors or Section 27 Plumbing.

CS-SHR100-P-N926/L-1066” swivel SH-SW6 showerhead w/WSA-100 6” arm. Shown w/P-N926 escutcheon P-SHE6 pressure balance escutcheon w/L-106 lever.



27-27

Revised 05/31/16


Wall mount shower fixtures.

SHOWER SETS

Pressure balance valve: regulates flow, pressure temperature and on - off Shown with L-106 lever. Thermostatic valve available.

App

rox

38"

6"

1"4

1/2"

6 1/

2"

6 1/2"

3 1/

2"

24"

8"6"

Pressure balance valve allows 2.5 gal/minute maximum water flow.All valves supplied by Sun Valley Bronze.For knob and lever options see Section 2 Knobs & Levers, Section 12 Screen Doors or Section 27 Plumbing.

CS-SHR900/L-106 Exposed wall mount shower fixture shown w/ 6” swivel SH-SW6 showerhead,P-SHE-6 pressure balance escutcheon, L-106 lever.



27-28

Revised 05/31/16


Hand held shower fixtures.

HAND HELD SHOWER SETS

Pressure balance valve: regulates flow, temperature and on/off. Shown with L-106 lever. Thermostatic valve available.

4"

2 1/

2"

4 1/

2"

3 1/

2"

6 1/

2"

6 1/2"

Pressure balance valve allows 2.5 gal/minute maximum water flow.Hose length 65”.Overall hand-held length 74”.All valves supplied by Sun Valley Bronze.


CS-SHR900-HH Hand-held shower fixture shown w/P-SHE6 pressure balance escutcheon and L-106 lever.



27-29

Revised 05/31/16


Wall mount shower fixtures.

SHOWER SETS

3 1/

2"

3 1/2"

Volume control valve for on/off and water volume up to 2.5 gal/minute.

4"

2 1/

2"

4 1/

2"

Hand-held Shower Head

4"

6"1"

1"

4 1/

2"

4 1/

2"3

1/2"

3 1/

4"

6 1/

2"

6 1/2"

Thermostatic: temperature valve. Shown with L-106 lever.

Diverter valve for hand-held or shower head.

3 1/

2"


App

rox

38"

6"

24"

8"6"

Regulator valve allows 2.5 gal/minute maximum water flow.Hose length 65”.All valves supplied by Sun Valley Bronze.For knob and lever options see Section 2 Knobs & Levers, Section 12 Screen Doors or Section 27 Plumbing.

CS-SHR900/900HH/L-106Exposed thermostatic wall mount shower fixture w/hand-held showerhead shown w/L-106 lever. 6 1/2” thermostatic balance escutcheon.



27-30

Revised 05/31/16


WALL MOUNT SHOWER SETS

Wall mount shower sets.

20"

7"

5 1/

2"

12"

3 1/2"

PP-5512 w/SHR-900HH w/ LF-904 Scallop Knob and V3 Thermo valve.

FSH-1 7" x 20" Flat showerhead.

P-SHE-35 w/ LF-904 Scallop Knob. Diverter valve for handheld or showerhead. V5 Diverter valve.

Wall Mount Shower Set 1PP-512 5.5” x 12” Escutcheon w/SHR900-HH (2) LF-904 Scallop Knobs (1) P-SHE-35 Diverter Trim (1) V3 Thermostatic Valve (1) V5 Diverter Valve (1) FSH-1 7” x 20” Flat Showerhead

Wall Mount Shower Set 2PP-512 5.5” x 12” Escutcheon w/SHR900-HH (2) LF-904 Scallop Knobs (1) P-SHE-35 Diverter Trim (1) V1 Pressure Balance Valve (1) V5 Diverter Valve (1) FSH-1 7” x 20” Flat Showerhead



27-31

Revised 05/31/16


À LA CARTE SHOWER COMPONENTS4"

2 1/

2"

4 1/

2"

6"

1"

6"


SH-SW6 – 6" Bronze swivel showerhead.

3 1/

2"

FSH-1 – Flat showerhead.

SH-8 – 8" Fixed showerhead.

TS-TS-SHR900-HH – Hand-held assembly. – 65"5" Bronze hose, bracket and hand-held shower.

8"

1"

1"

8"


4"

4"

20"

7"

7"

A` la carte shower components.

TS-SHR900-HH Bronze hose, bracket and hand-held shower.

SH-SW6 6” Swivel bronze showerhead. Wall or ceiling mount.

SH-8 8” Bronze showerhead. Wall or ceiling mount.

FSH-1 7” x 20” Flat bronze showerhead. Wall mount.



27-32

Revised 05/31/16



À LA CARTE SHOWER COMPONENTS

P-SHE-65 – Trim for thermo or pressure balance valve. – 3/8" Thickness.

6 1/

2"

6"

WSA-1SA-100 – Wall mount shower arm. – Shown w/P-N926 escutcheon.

P-SHE-35 – Trim for diverter or volume contral valve. – 3/8" Thickness.

3 1/2"

3 1/

2"

6"

2 1/

2"

1"

CSA-1SA-100 – Ceiling mount shower arm. – Shown w/P-N926 escutcheon.

6 1/2"

P-5512 – Shower assembly. – Shown w/Scallop Knob, handheld elbow and bracket.

5 1/

2"

12"2 1/2"

1"P-SHE-65 6 1/2” Bronze square escutcheon trim w/spline adapters for thermo or

pressure balance valve.

RP-SHE-75 7 1/2” Bronze round escutcheon trim w/spline adaptors for thermo or pressure balance valve.

P-SHE-35 3 1/2” Bronze square escutcheon trim w/spline adapters for diverter or volume control valve.

RP-SHE-45 4 1/2” Bronze round escutcheon trim w/spline adapters for diverter or volume control valve. Round elbow escutcheon for SHR-900.

P-SHE-45 4 1/2” Bronze square escutcheon trim w/spline adapters for diverter or volume control valve. Square elbow escutcheon for SHR-900.

P-SHE-25 2 1/2” Bronze square escutcheon trim for handheld shower bracket.RP-SHE-25 2 1/2” Bronze round escutcheon trim for handheld shower bracket.

P-5512 5 1/2” x 12” Shower escutcheon trim only. Shown w/Scallop Knob hand shower elbow and bracket.

WSA-100 6” Bronze wall mount shower arm w/P-N926 escutcheon.CSA-100 6” Bronze ceiling mount shower arm w/P-N926 escutcheon.



27-33

Revised 05/31/16



À LA CARTE SHOWER COMPONENTS

WTS-900 – Tub spout.

1 1/4"

7 1/2"

6 7/8"

SDC-1 – Drain cover.

3 3/4"

3 3/

4"WTS-900 7 1/2” Bronze contemporary wall mount tub spout filler only.

SDC-1 3 3/4” Square drain cover w/EBBE plastic drain.



27-34

Revised 05/31/16

À LA CARTE SHOWER VALVES

V1 Cal Faucets pressure balance valve (PBR), 4.2GPM for shower port. Regulates flow, temperature and on/off.

V3 Kohler 3/4” thermostatic valve, 17GPM. Temperature valve.

V4 Cal Faucets 1/2” Stop valve #50-W-R. Controls on/off and water volume up to 2.5GPM. 1/4” Turn ceramic valve.

V5Cal Faucets 1/2” 2/3 way diverter valve. Diverts water from one shower fixture to another in same shower or tub spout. #WDV-NS-R up to 3 fixtures.

V6 Cal Faucets 3/4” stop valve #75-W-R. Controls on/off and water volume up to 2.5GPM. 1/4” Turn ceramic valve.

V7 Cal Faucets #VL-R vessel wall mount valve. 1/4” Turn ceramic cartridge. 8” center-to-center.

V8 Cal Faucets #08-75. 1/4” Turn ceramic cartridges for tub filler.

Note: All valves are modified with Sun Valley Bronze parts.



27-35

Revised 05/31/16


Wall mount tub filler.

WALL MOUNT TUB FILLER

2 1/

2"

3 1/

2"

8"

1 1/4"

7 1/2"

6 7/8"

2 1/2"

Note: Bath faucets are hand cast from bronze.Supplied with 1/2 valve for standard flow of 15 gal/per minute.All valves supplied by Sun Valley Bronze.Drain not included. For drain options see page 27-4.


CS-WTF-900-P-N926/BF-902 Bath fixture faucet shown w/P-N926 escutcheon, BF-902 knobs and WTS-900 tub spout.



27-36

Revised 05/31/16


FREESTANDING TUB FILLER

Freestanding tub filler.

Note: Bath faucets are hand cast from bronze.Supplied with 1/2 valve for standard flow of 15 gal/per minute.All valves supplied by Sun Valley Bronze.Drain not included.


32"

3 3/4"

2 3/4"

11 3/4"

1 1/

4"

12"

28"

1 5/8"

FLOOR

1 1/

4"

1 1/

2"

2" 3/8"

3 1/

4"

12"

4"

5/8"

1 3/

4"

FTFE-1 – Riser Escutcheon

TS-SHR900-HH – Hand-held assembly. – 65" Bronze hose bracket and hand-held shower.

4"4

1/2"

CS-FTF-1000 – Freestanding tub filler.

CS-FTF-1000 Freestanding tub filler shown w/L-129 levers. Cast risers.

TS-SHR900-HH Bronze hose, bracket and hand-held shower.

FTFE-1 Freestanding tub filler riser escutcheons (pair).

FTFD-1 Freestanding tub filler diverter for handshower.

Spec 27G Plumbing Hardware

Documents

Transcript of Spec 27G Plumbing Hardware