SP6010 - Star Point terminal test function supports frequency range stipulated by...
Transcript of SP6010 - Star Point terminal test function supports frequency range stipulated by...
SP6010 Communication Test Set
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
Description
SP6010 is a Communication Test Set with the own IPR of Beijing StarPoint Technology Company Limited Co.,
Ltd. This test set can perform TD-SCDMA RF conformance test, HSDPA performance test, HSUPA performance
test and supporting function of audio test; support WCDMA RF test, GSM RF test, GPRS/EDGD RF test and
CMMB test. SP6010 also has calibration function in Non Signaling test mode.
SP6010 can be interconnected with other instruments to accomplish system integration test through its GPIB
remote control function and numerous and comprehensive peripheral interfaces.
SP6010 is applicable to extensive fields, such as chip maker, design house, terminal certificate, terminal
manufacture and maintenance of TD-SCDMA, HSDPA, HSUPA, WCDMA, GSM, GPRS/EDGE and CMMB.
Function
The functions of SP6010 show in below figure:
SP6010 can provide a complete test function such as TD-SCDMA, WCDMA, GSM, GPRS/EDGE, and CMMB.
Support the switch among TD-SCDMA, WCDMA,GSM, CMMB;
In connection state, support the switch between TD-SCDMA and GSM.
TD-SCDMA Test Function
SP6010 can function as TD-SCDMA system simulator, TD-SCDMA signal generator and TD-SCDMA terminal
signal analyzer. It supports TD-SCDMA RF conformance test, and the measurements cover the testing item set by
3GPP TS34.122.
TD-SCDMA RF Test
According to the 3GPP TS34.122, SP6010 complete covers the test items such as terminal transmitters, receivers,
performance requirement, HSDPA performance and HSUPA performance.
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
TD-SCDMA Terminal Calibration
Support TD-SCDMA terminal non-signal calibration:
AUTO FREQUENCY CALLIBATION
AUTO POWER CALLIBRATION
AUTO GAIN CALLIBRATION
TD-SCDMA Audio Test
Under AMR12.2k service mode, it supplies four audio
test function modes:
Loopback (Default options)
Decoder_Cal
Encoder_Cal
Handset Low
TD-SCDMA System Technical Index
Overall Parameters
Protocol standard 3GPP-TDD LCR Release4、Release5、Release7 (HSUPA)
Chip rate 1.28Mcps
Physical channel P-CCPCH、S-CCPCH、PICH、FPACH、DwPCH、DPCH、HS-DPSCH、HS-SCCH
Support modulation method QPSK、16QAM
DPCH data rate
DL/UL 12.2 kbps (Loopback Mode 1 TM)
DL/UL 64 kbps (Loopback Mode 1 AM)
DL144 kbps / UL 64 kbps (Loopback Mode 1 AM)
DL384 kbps / UL 64 kbps (Loopback Mode 1 AM)
Transmitter Index
TD-SCDMA signal output frequency range 1880 MHz ~ 2400 MHz
Frequency resolution 1 Hz
TD-SCDMA signal output power range -120 dBm ~ -25 dBm (RF IN / OUT port)
-120 dBm ~ -15 dBm (RF OUT port)
Output power resolution 0.1 dB
Output TD-SCDMA signal EVM < 1.5%
Receiver Index
TD-SCDMA signal maximum safe input
level +33 dBm
TD-SCDMA signal input frequency range 1880 MHz ~ 2400 MHz
Frequency resolution 1 Hz
TD-SCDMA signal input power range -65 dBm ~ +30 dBm
Input power resolution 0.1 dB
Power test tolerance < ±0.5 dB
Frequency stability test range ±1.5 kHz
Frequency stability test tolerance ±10 Hz
EVM test range < 24%
EVM test accuracy ±1%
Audio Function Index
Audio Output
Audio signal output method Single port output
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
Frequency flatness(take 1khz as basis) 200 Hz ~ 8 kHz ±0.2 dB
100 Hz ~ 200 Hz ±0.6 dB
Maximum output level +3 dBv (600 Ωload)
Output resistance 30 Ω
SNR 100 dB
THD+N < 0.02%
Audio Input
Audio signal input method Single port input
Frequency flatness
(take 1khz as basis)
200 Hz ~ 8 kHz ±0.2 dB
100 Hz ~ 200 Hz ±0.6 dB
Input level range -50 dBv ~ +1 dBv
Input resistance 10.8 kΩ
SNR 80 dB
THD+N < 0.02%
WCDMA Test Function
SP6010 can function as WCDMA system simulator, WCDMA signal generator and WCDMA terminal signal
analyzer. It supports WCDMA RF test, and the measurements cover terminal factory test requirements and the
testing item set by 3GPP TS34.121.
WCDMA RF Test
According to the 3GPP TS34.121, SP6010 complete covers the test items such as terminal transmitters, receivers,
performance requirement.
WCDMANon-signaling
Test
Wave
Quality
Inner Loop
Power
Control
Spectrum
Emission
Mask
Adjacent
Channel
Leakage
power Ratio
BER
PRACH ON/
OFF Power
Measurement
Dynamic
Power
Measurement
Frequency
Error
WCDMA Terminal Calibration
Support WCDMA terminal non-signal calibration:
FDD Burst Frequency Calibrate
FDD Fast Power Calibrate
FDD Dynamic Power Measurement
WCDMA System Technical Index
Overall Parameters
Protocol standard 3GPP- FDD Release4、Release5
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
Chip rate 3.84Mcps
Physical channel P-CCPCH、PICH、PRACH、SCH、DPCH、CPICH
Support modulation method HPSK/QPSK
DPCH data rate DL/UL 12.2 kbps
Transmitter Index
WCDMA signal output frequency range Band I、Band II、Band III、Band IV、Band V、Band VI、Band VII、Band VIII
Frequency resolution 1 Hz
WCDMA signal output power range -120 dBm ~ -19 dBm (RF IN / OUT port)
-120 dBm ~ -9dBm (RF OUT port)
Output power resolution 0.1 dB
Output WCDMA signal EVM < 2%
Receiver Index
WCDMA signal maximum safe input level +33 dBm
WCDMA signal input frequency range Band I、Band II、Band III、Band IV、Band V、Band VI、Band VII、Band VIII
Frequency resolution 1 Hz
WCDMA signal input power range -65 dBm ~ +30 dBm
Input power resolution 0.1 dB
Power test tolerance < ±0.5 dB
Frequency stability test range ±1.5 kHz
Frequency stability test tolerance ±12 Hz
EVM test range < 34%
EVM test accuracy ±1%
GSM Test Function
SP6010GSM terminal test function supports frequency range stipulated by GSM900,DCS1800,PCS1900,GSM850
and so on ,and also supports handover between frequency range and frequency points.
GSM Terminal RF Test
According to the requirements of 3GPP TS 51.010 v7.10.0 of GSM, SP6010 can accomplish basic RF index test
of GSM terminal.
GSM terminal calibration function
Support GSM terminal non-signal calibration:
GSM frequency calibration(AFC)
GSM power calibration(APC)
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
GSM gain calibration(AGC)
GSM System Technical Index
Overall Parameters
Protocol standard 3GPP TS 51.010
Modulation method GMSK
Service type FS voice service
Transmitter Index
Supportive signal frequency range PGSM / EGSM / DCS1800 / PCS / RGSM / GSM850 / GSM480 / GSM750 /
TGSM810
Frequency resolution 1 Hz
GSM signal output power range -120 dBm ~ -25 dBm (RF IN / OUT port)
-120 dBm ~ -15 dBm (RF OUT port)
Output power resolution 0.1 dB
Receiver Index
GSM signal maximum safe input level +36 dBm
Supportive signal frequency range PGSM / EGSM / DCS1800 / PCS / RGSM / GSM850 / GSM480 / GSM750 /
TGSM810
Frequency resolution 1 Hz
GSM signal input power range -60 dBm ~ +35 dBm
Input power resolution 0.1 dB
Power test tolerance < ±0.5 dB
Frequency deviation test range ±1.5 kHz
Frequency deviation test tolerance ±10 Hz
GPRS/EDGE Test Function
SP6010 GPRS / EDGE terminal test function supports frequency range stipulated by GSM900, DCS1800,
PCS1900 and GSM850 and so on and also supports the handover between frequency range and frequency points.
GPRS / EDGE Terminal RF Test:
According to the requirements of 3GPP TS 51.010 v8.0.0, SP6010 can accomplish basic RF index test of GPRS /
EDGE terminal.
GPRS/EDGE Terminal Calibration Function
Support GPRS / EDGE terminal non-signal calibration
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
EDGE frequency calibration(AFC)
EDGE power calibration(APC)
GPRS/EDGE System Technical Index
Overall Parameters
Protocol standard 3GPP TS 51.010
Modulation method GMSK / 8PSK
Service type Mode A / Mode B / Mode SRB
Transmitter Index
Supportive signal frequency range PGSM / EGSM / DCS1800 / PCS / RGSM / GSM850 / GSM480 / GSM750 /
TGSM810
Frequency resolution 1 Hz
Module signal output power range -120 dBm ~ -25 dBm (RF IN / OUT port)
-120 dBm ~ -15 dBm (RF OUT port)
Output power resolution 0.1 dB
Receiver Index
Modulation signal maximum safe input
level +36 dBm
Supportive signal frequency range PGSM / EGSM / DCS1800 / PCS / RGSM / GSM850 / GSM480 / GSM750 /
TGSM810
Frequency resolution 1 Hz
Modulation signal input power range -60 dBm ~ +35 dBm
Input power resolution 0.1 dB
Power test tolerance < ±0.5 dB
Frequency deviation test range ±1.5 kHz
Frequency deviation test tolerance ±10 Hz
CMMB Test Function
Main services of mobile multimedia broadcast terminal includes television broadcast, voice broadcast, electrical
service guide, emergency broadcast and data broadcast and so on According to standard part 1-7 of "Mobile
multimedia broadcast ",SP6010 supports CMMB terminal service test:
CMMB System Technical Index
Overall Parameters
Protocol standard mobile multimedia broadcast standard
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
Bandwidth 8MHz
Modulation method OFDM
Mapping method BPSK、QPSK和 16QAM
Encoding method Outer encoding: RS (240,176) 、 (240,192) 、 (240,224) 、 (240,240)
Inner encoding: LDPC 1/2、3/4
Circling prefix 51.2µs
System net load 2.046 ~ 16.243Mbps
Number of sub loading waving 4096
Outer interlacing Support mode 1.2 and 3
Scrambling method Support all modes
Transmitter Index
CMMB signal output frequency range 470MHz ~ 798MHz (U wave band)
Frequency resolution 1 Hz
CMMB signal output power range -110 dBm ~ -35 dBm
Output power resolution 0.1 dB
Non-signaling Basic test function
The SP6010 non-signaling Basic test function to provide a radio frequency list feature, and support of
TD-SCDMA, GSM and EDGE terminal FDT calibration feature (requires chip support).
TD-SCDMA terminal non-signaling Basic test function
Support TD-SCDMA terminal FDT calibration feature:
AUTO FREQUENCY CALLIBATION(AFC)
FAST POWER CALLIBATION(FPC)
Overall Parameters
Burst type DL:Default、CW、TotalCW
UL:Default、CW
Support modulation method QPSK
Support Time slot UL:TS1 ~ TS5,DL:TS2 ~ TS6
Transmitter Index
List Step parameter RF frequency, RF power, Line losses, Baseband relative power
signal output frequency range 460 MHz ~ 2500 MHz
Frequency resolution 1 Hz
signal output power range -120 dBm ~ -25 dBm (RF IN / OUT Port)
-120 dBm ~ -15 dBm (RF OUT Port)
Output power resolution 0.1 dB
Power test tolerance < ±0.5 dB
Baseband dynamic range 0 ~ -25dB
Baseband Resolution 0.1 dB
Baseband error < ±0.5 dB
Step number <=100
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
Frequency switch time <800us
Power switch time <250us
Receiver Index
List Step parameter RF frequency, RF reference level, Line losses, Continuous frames
signal output frequency range 460 MHz ~ 2500 MHz
Frequency resolution 1 Hz
The maximum safe input level +27 dBm
Input power resolution 0.1 dB
Input power of the test error < ±0.5 dB
Step number <=100
Frequency switch time <800us
Reference level switch time <250us
Test duration TD:<=1500 Sub-frame
GSM/EDGE terminal non-signaling Basic test function
Support GSM/EDGE terminal FDT calibration feature:
AUTO FREQUENCY CALLIBATION(AFC)
FAST POWER CALLIBATION(FPC)
Overall Parameters
Burst type DL:Default、CW、TotalCW
UL:Default、CW
Support modulation method DL:GMSK ,UL:GMSK、8PSK
Support Time slot UL:TS0 ~ TS7,DL:TS1 ~ TS7
Transmitter Index
List Step parameter RF frequency, RF power, Line losses, Baseband relative power
signal output frequency range 460 MHz ~ 2500 MHz
Frequency resolution 1 Hz
signal output power range -120 dBm ~ -25 dBm (RF IN / OUT Port)
-120 dBm ~ -15 dBm (RF OUT Port)
Output power resolution 0.1 dB
Power test tolerance < ±0.5 dB
Baseband dynamic range 0 ~ -25dB
Baseband Resolution 0.1 dB
Baseband error < ±0.5 dB
Step number <=100
Frequency switch time <800us
Power switch time <250us
Receiver Index
List Step parameter RF frequency, RF reference level, Line losses, Continuous frames
signal output frequency range 460 MHz ~ 2500 MHz
Frequency resolution 1 Hz
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
The maximum safe input level +36 dBm
Input power resolution 0.1 dB
Input power of the test error < ±0.5 dB
Step number <=100
Frequency switch time <800us
Reference level switch time <250us
Test duration <=2500 frame
WCDMA terminal non-signaling Basic test function
Support GSM/EDGE terminal FDT calibration feature:
AUTO FREQUENCY CALLIBATION(AFC)
WCDMA FAST POWER CALLIBATION(WFPC)
Overall Parameters
Burst type DL:Default、CW、TotalCW
UL:Default、CW
Support modulation method QPSK、BPSK
Support Time slot UL:TS0 ~ TS12,DL:TS1 ~ TS12
Transmitter Index
List Step parameter RF frequency, RF power, Line losses, Baseband relative power
signal output frequency range 460 MHz ~ 2500 MHz
Frequency resolution 1 Hz
signal output power range -120 dBm ~ -25 dBm (RF IN / OUT Port)
-120 dBm ~ -15 dBm (RF OUT Port)
Output power resolution 0.1 dB
Power test tolerance < ±0.5 dB
Baseband dynamic range 0 ~ -25dB
Baseband Resolution 0.1 dB
Baseband error < ±0.5 dB
Step number <=100
Frequency switch time <500us
Power switch time <250us
Receiver Index
List Step parameter RF frequency, RF reference level, Line losses, Continuous frames
signal output frequency range 460 MHz ~ 2500 MHz
Frequency resolution 1 Hz
The maximum safe input level +33 dBm
Input power resolution 0.1 dB
Input power of the test error < ±0.5 dB
Step number <=250
Frequency switch time <500us
Reference level switch time <250us
Test duration <=6000 frame
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
SP6010 basic technical index
Transmitter RF Index
CW output frequency range 460 MHz ~ 2500 MHz
Frequency resolution 1 Hz
CW output power range -120 dBm ~ -10 dBm (RF IN / OUT port)
-120 dBm ~ 0 dBm (RF OUT port)
Output power resolution 0.1 dB
CW output power tolerance < ±0.5 dB
CW output power repeatable < 0.05 dB
Transmitter phase noise Deviate 20 kHz <-115 dBc/Hz / deviate 10 MHz <-135 dBc/Hz
VSWR(voltage standing wave ratio) < 1.3 (when the output level is less than -3 dBm)
Output resistance 50 Ω
Output interface type N Female
Receiver RF Index
CW maximum safe input level +27 dBm
CW input frequency range 460 MHz ~ 2500 MHz
Frequency resolution 1 Hz
CW input power range -65 dBm ~ +27 dBm
Input power resolution 0.1 dB
Receiver noise floor < -130 dBm/Hz
CW input power test tolerance < ±0.5 dB
CW frequency deviation test range ±15 kHz
CW frequency test tolerance ±1 Hz
Input resistance 50 Ω
Input interface type N Female
Time base index
Temperature stability ≤ 0.01 ppm
maximum frequency deviation < 1 10-8 (0 ~ 40 ℃)
aging rate ≤ 0.1 ppm/year
Time Clock Reference Input
input frequency requirement 10 M±100 Hz
input voltage requirement 0 dBm ±10 dB sine/TTL
input resistance 50 Ω
input interface type BNC Female
Instrument Working Condition
instrument working temperature +5 ~ +40 ℃
instrument working humidity 20% ~ 80%
instrument storage temperature 0 ℃ ~ +70 ℃
instrument storage humidity 5% ~ 93%
preheat time for boot 30 minutes
Instruments Dimension
ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China
TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]
SSPP66001100 DDaattaa SShheeeett
height 240 mm
width 550 mm
depth 600 mm
Core Value of the Product
Flexible Application
Hardware and software of SP6010 adopts module design and the abundant hardware preservation resources and
software selection will make the product more flexible and the customer investment more economical. Abundant
time clock and synchronous signal interface will expand the instrument use scope at the most. The customer can
choose various instruments to realize system integration test.
High Efficiency Test
PXI structure of SP6010 can accomplish various complex tests with high speed and show it out by figure interface.
High speed test improves test efficiency and save the investment of test.
Accurate Test Result
High accuracy RF font end with accuracy test algorithm and conformance test procedure and method will make
the result more credible.
Strong Remote Control Function
Adopt bus line transmission technology of GPIB and LAN and so on to control remotely. Configured the tester
parameter and motion so as to acquire the measurement result.
Product Quality Guarantee and After-Sale Service
StarPoint has the research and develop employees with abundant experience, advanced solutions within industry
and perfect training and upgrade service. We will create more added values with SP6010 by our heart.
Our company can supply technical training of instrument usage and instrument rent service. For the customer who
will buy our products, we will supply perfect after-sale services like commissioning, maintenance, upgrade and
calibration and so on. Meanwhile, to ensure customer to get the best using effect of instruments, our company will
supply various services such as test solutions consultant, product technical support and test application technical
consultant and so on according to customers' special requirements.
Product Order Information
About the detail information of SP6010 integrated tester,please log in our web site http://www.starpointcomm.com
or dial technical consultant cell 010-62304889.