SP Tools - MaytoJuly2013
-
Upload
riverland-welding-and-tool-supplies -
Category
Documents
-
view
157 -
download
0
description
Transcript of SP Tools - MaytoJuly2013
PROFESSIONALS
CHOICE
Quad Drive
Motorsport Tool Kits The SP Motorsport range of tools are designed to offer maximum strength and durabilitySockets & Accessories• Flat drive technology offers maximum contact & grip• Ratchet gear teeth strengthened to sustain applied torque• Innovative design for strength & durability
Spanners• Quad drive allows four contact points• Triple chrome finish to protect tools• High polished finish for easy cleanup
Standard Spanner
Kit Contains:• ROE combination spanners• Flare metric/SAE spanners• 1/4”, 3/8” & 1/2”dr sockets &
accessories• Hex Keys & screwdrivers• Pliers & cutters• Hammer, hacksaw & tape
measure• Adjustable wrench• Pry bars & hook and pick sets• 7 drawer black nickle tool box
Through-Handle 4pc Pry Bar Set• 1/4”x8”, 3/8”x12”, 7/16”x18”, 7/16”x24”• Through-handle square shank with capped end
1/4” Dr Hex Screwdriver• Voltage: 3.6 volt• 2 Speed: Low 220rpm High 450rpm• Charging Time:1 hour auto cut-off• Clutch torque control with 16 sections
For Full Listing of Tool Kit Contents Visit: WWW.SPHANDTOOLS.COM
May/June/July 2013
SP30839
$69
SP81201
$139
SP52265$1995
SP52255$1395
Also come with:• 7 drawer black nickle roller cab
The
NEW
NEW
PAGE 2 For Full Listing of Tool Kit Contents Visit: WWW.SPHANDTOOLS.COM
Metric/SAETool Kit in Custom Series Tool Box
240pc Metric/SAE Tool Kit in Custom Series Tool Box
275pc Field Service Tool Kit
TOOL KITS FOR THE PROFESSIONAL
• Metric & SAE ROE combination spanners• 1/4”, 3/8” & 1/2” dr 12pt metric & SAE sockets & accessories• Screwdrivers• Pliers & Cutters• Circlip pliers• Adjustable wrench• Metric & SAE key sets
• Bit set, finger ratchet & ratchet driver sets• Pin punch & chisel set• Ball pein hammers• Pry bars, tweezer, pick & brush sets• Hacksaw & tape measure• Magnetic parts tray• Utility folding knife
• Inspection mirror & pick-up magnetic tool• Circuit tester• Digital multimeter• 15 drawer roller cabinet
• ROE spanners• 1/4”, 3/8” & 1/2” dr Sockets
& accessories• Screwdrivers
• Pliers & cutters• Adjustable wrench• Hex & TORX keys
• Hammer• Foldback knife
• Pick up tool• Inspection mirror
• Magnetic parts tray• Circuit tester
• Multimeter• Pick set
• Tape measure• Screw extractor set
• 7 drawer field service box
134pc Metric/SAE Tool Kit in Custom Series Tool Box
296pc Metric/SAE Tool Kit in Custom Series Roller Cabinet
202pc
• ROE combination spanners• Flare metric/SAE spanners• 1/4”, 3/8” & 1/2”dr sockets & accessories• Hex keys & screwdrivers• Pliers & cutters• Hammer, hacksaw & tape measure
• Adjustable wrench• Pry bars & hook and pick sets• 7 drawer steel tool box• Maxi drawers featuring 405mm depth
• ROE combination spanners
• 1/4”, 3/8” & 1/2” dr sockets & accessories
• Combination pliers & diagonal cutters
• Adjustable wrench
• Adaptors • Hammer• Hex keys• Screwdrivers • Wobble extension bars • 7 drawer tool box
• ROE combination spanners
• 1/4”, 3/8” & 1/2” dr Sockets and accessories
• Adjustable wrench• Ball pein hammer
• Pliers and cutters• Screwdriver sets• Hex key sets• Hacksaw• Hook & pick set• Pry bar set• 7 drawer steel tool box
SP50097
$749SP50101
$995SP50102
$1195
SP50615
$2495SP50115
$1995
PAGE 3For Full Listing of Tool Kit Contents Visit: WWW.SPHANDTOOLS.COM
• All sockets, socket accessories & ROE spanners come in hidensity foam storage system• 1/4”, 3/8”, 1/2” dr sockets
& accessories• Screwdrivers and hex keys
• Bit set• Pliers and cutters• Adjustable wrench &
hammer• 7 drawer concept tool
box
231pc Metric/SAE Tool Kit in Hyper Blue
• All sockets, socket accessories & ROE spanners come in hi-density foam
storage system • 1/4”, 3/8” & 1/2” dr
sockets & accessories • Screwdrivers and hex keys
• Pliers and cutters • Adjustable wrench &
hammer • Bit set • 7 drawer concept tool
box • 7 drawer roller cabinet
• All sockets, socket accessories & ROE spanners come in hi-density foam
storage system• ROE combination spanners• Flare metric/SAE spanners• 1/4”, 3/8” & 1/2”dr sockets
& accessories
• Hex Keys & screwdrivers• Pliers & cutters• Hammer, hacksaw & tape
measure• Adjustable wrench• Pry bars & hook and pick
sets• 7 drawer white concept
tool box
242pc Motorsport Metric/SAE Tool Kit in Diamond White Concept Tool Box
• 1/4”, 3/8” and 1/2” dr sockets &accessories
• Adjustable wrenches • Sockets
• ROE Spanners • Screwdrivers
• Hex keys• Punch and chisel sets
• Ball pein hammers• Pliers • Circlip pliers
• Diagonal cutters• Hacksaw
• Tape measure• Hook & pick set
• Pry bar set• 6 x tool storage trays
• 8 drawer tool box
• 7 drawer Custom series
roller cabinet
• 1/4”, 3/8” & 1/2”dr sockets and accessories
• ROE, stubby ROE and geardrive spanners
• E TORX sockets & spanners• 1/2”dr impact sockets,
inhex & TORX bits• Adjustable wrenches
• T-handle hex keys & TORX keys
• Hammers soft/hard face, ball pein & dead blow• Pliers, cutters & wire
strippers• Hand riveter, ratchet
set & burr set• Digital multimeter,
work light, filter wrench & metal rulers
• 8 drawer custom series tool box• 7 drawer roller cabinet
RED SP50040
BLUE SP50042
ORANGE SP50043
TOOL KITS FOR THE PROFESSIONAL AUSTRALIA’S LEADING RANGE
230pc Metric/SAE Tool Kit in Atomic Green Series Tool Box
603pc Metric/SAE Tool Kit in Custom Series Tool Box343pc Metric/SAE Tool Kit in Custom Series Tool Box
RED SP50060
GREEN SP50062
ORANGE SP50063
SP50062
$1775SP52250
$1395
SP50110
$2950SP50165
$4200
SP50041
$1259
Side storage compartment
Cliklok drawerlocking system
PAGE 4
SP PROFESSIONAL STORAGE
RED SP40215
GREEN SP40225
• Heavy duty full extension ball bearing drawer slides
• Dual gas strut lid stays• Dog bone style frame
construction offers maximum rigidity
• Cliklok drawer locking system
• Side storage compartments suitable for aerosol cans
RED SP40216
GREEN SP40226
• Heavy duty full extension ball bearing drawer slides
• Dog bone style frame construction
• Cliklok drawer locking system• Side storage compartments
suitable for aerosol cans• Side table• Corner protection
• Semi-Rigid Construction allows Wide Open Mouth to Maintain Shape
• Easy Access Pockets and Compartments for Your Storage Needs
• Heavy Duty Fabric & Moulded Waterproof Base for Long Lasting Durability.
• Padded Shoulder Strap is Removable & Adjustable
• Combination stainless steel/ rubber worktop
• 3x Lockable drawers• Load capacity 2 tonnes• Can be bolted to floor
• Drawers 118w x 286d x 60h• Can be used for parts
storage in workshops or mobile service vehicles
• Parts bins lock into outer steel cabinet
7 Drawer Custom Series Side Cabinet (426w x 458d x 844h)
10 Drawer Concept Series Steel Tool Cabinets (1130w x 470d x 560h)
13 Drawer Blue Concept Series Roller Cabinets(1145w x 470d x 1030h with castors)
SP Open Mouth Bag
18 Drawer Storage Box (826w x 300d x 305h)
2000mm Custom Series Workshop Bench ( 2000w x 645d x 872h)
Sticker 2012 SP Car Sticker 2012 SP Racing
Sticker 2012 SP Girl
SP Tools bottle Opener
For Full Tool Storage Specification Visit: WWW.SPHANDTOOLS.COM
SPS1$10
SPS2$20
SPBO$10
SPS3$20
SP40205
$769SP40206
$1150
SP40568
$199
SP40131
$489 SP40400
$595
SP40360
$59
Heavy duty wheels
Wooden insert top
PAGE 5
SP PROFESSIONAL STORAGE SP PROFESSIONAL STORAGE
11 Drawer Custom Series Roller Cabinet (1170w x 480d x 1145h)
• Heavy duty 28 ball bearing drawer slides
• Robust wall construction• Double powder coating
resists scratching• Full drawer extension
capability• Dual gas struts lid stays
on tool boxes
8 Drawer Custom Series Steel Tool Cabinet7 Drawer Custom Series Steel Tool Cabinet
7 Drawer Custom Series Roller Cabinet (680w x 458d x 775h)
Off Road Series Truck Box(559w x 236d x 229h)
2 Drawer Custom Series Steel Tool Trolley (900w x490d x770h)
• Metal tray inside• 1.2mm steel construction with powder coated finish• Full length piano hinge
connection for lid
• Heavy duty 28 ball bearing drawer slides
• Robust wall construction• Double powder coating
resists scratching• Full drawer extension
capability• Dual gas struts lid stays
on tool boxes
• Heavy duty 28 ball bearing drawer slides
• Robust wall construction
• Double powder coating resists scratching
• Huge maxi depth drawers - 405mm
• Full drawer extension capability
• Heavy duty 28 ball bearing drawer slides
• Robust wall construction
• Double powder coating resists scratching
• Huge maxi depth drawers - 405mm
• Full drawer extension capability
For Full Tool Storage Specification Visit: WWW.SPHANDTOOLS.COM
(668w x 316d x 461h) (668w x 445d x 465h)
10 Drawer Motorsport Series Workshop Roller Cabinet(1830w x 470d x 824h withcastors 980h)• Seam welded body for high strength• Cliklok drawer locking system• Heavy duty full extension ball bearing drawer slides• Dual gas struts on tool boxes• Heavy duty castors on roller cabinets
SP40101
$325
SP40107
$299
SP40104
$529
SP40103
$459
SP40301
$69
SP40106
$995
SP40035$2295
PAGE 6 www. sphandtools.com
SP SOCKET SETS
23pc 1/4” Dr 12pt Metric/SAE Socket Set
• 10-24mm impact sockets• 75 &125mm impact
extension bars• Impact universal joint
• 3/8-1” impact sockets• 75 &125mm impact
extension bars• Impact universal joint
8pc 3/4” Dr 6pt Metric Deep Impact Socket Set• 24, 27, 30, 32, 34, 36, 41 & 46mm deep impact sockets
32pc 3/4” Dr 12pt Metric/SAE Socket Set
41pc 1/2” Dr 12pt Metric/SAE Socket Set
15pc 1/2” Dr 6pt Metric Impact Socket Set
14pc 1/2” Dr 6pt SAE Impact Socket Set
51pc 3/8” Dr 12 & 6pt Metric/SAE Socket Set
3/8”DR FLARE CROWFOOT NUT WRENCH RAIL SETSWorks where a Conventional Socket Can’t
Sizes: • 10pce: 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
Sizes: • 7pce: 3/8’’, 7/16’’,
1/2’’, 9/16’’, 5/8’’, 11/16’’ & 3/4’’
7PCE 1/2”DR METRIC INHEX SOCKET RAIL SET (SHORT SERIES)
• 6, 7, 8, 10, 12, 14 & 17mm
9PCE 1/2”DR SAE INHEX SOCKET RAIL SET SHORT SERIES
• 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 1/2, 9/16 & 5/8”
• 1/4” & 3/8” dr 12pt metric SAE & TORX bit sockets
• 3/8” dr E-TORX sockets• 3/8” dr 12pt metric & SAE
hex bit sockets
• Motorsport ratchets• Flex handle• Wobble extension bars• Spark plug sockets• Universal joint & adaptor
74pc 1/4” & 3/8” Dr Metric/SAE Motorsport Socket SetSP20100
$59
SP20310
$99SP20315
$99
SP20201
$199
SP20300
$159
SP20400
$499
SP20420
$199
SP20602
$199
SP20561
$85
SP20563
$95
SP20574
$79SP20594
$59
NEW
NEW
PAGE 7www. sphandtools.com
MODEL SIZE PRICE SP18053 100mm $19
SP18058 150mm $25
SP18063 200mm $29
SP18068 250mm $35
SP18073 300mm $45
SP18078 375mm $79
SP18083 450mm $130
SP18088 600mm $195
Black
Chrome
MODEL SIZE PRICE SP18052 100mm $19
SP18057 150mm $25
SP18062 200mm $29
SP18067 250mm $35
SP18072 300mm $45
SP18077 375mm $79
SP18082 450mm $130
SP18087 600mm $195
SP SOCKET SETS SP SPANNERS
14pc Metric Combination Spanner Set• 6-19mm
13pc SAE Combination Spanner Set• 1/4 -1’’
11pc Metric CombinationStubby Spanner Set• 8- 16mm
8pc SAE CombinationStubby Spanner Set• 5/16- 3/4”
4pc Metric Flex HeadFlare Nut Spanner Set• 10 x 11, 12 x 13, 14 x 17 & 19 x 22mm
4pc SAE FlexHead Flare Nut Spanner Set• 3/8 x 7/16”, 1/2 x 9/16”, 5/8 x 11/16” & 3/4x7/8”
6pc Metric 40ºOffset Ring Spanner Set• 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19mm
5pc SAE 40ºOffset Ring Spanner Set• 5/16 x 3/8,
7/16 x 1/2, 9/16 x 5/8, 11/16 x 3/4, 7/8 x 15/16
9pc Metric JumboCombination Spanner Set• 19-36mm
9pc SAE JumboCombination Spanner Set• 3/4-1-1/2”
5pc Metric 0º Offset LongRing Spanner Set• 8 x 10, 12 x 14, 16 x 18, 17 x 19, 22 x 24mm
4pc SAE 0º Offset Long Ring Spanner Set• 3/8 x 5/16”, 1/2 x 7/16”,
5/8 x 9/16” & 3/4 x 11/16”
• 18-25º wider opening• Greater working angle• Non-protruding mechanism for limited space• Thicker heavy duty handle• Higher torque capabilities
Wide Jaw PremiumAdjustable Wrenches
SP10035
$149SP10084
$149
SP10144
$99SP10194
$99
SP10177
$59SP10127
$79
SP10136
$89
SP10185
$89
SP10019
$249
SP10069
$249SP10063
$99
SP10014
$99
PAGE 8 www. sphandtools.com
SP GEARDRIVE SPANNERS
9pc Metric 15º OffsetReversible GeardriveSpanner Set• 8-19mm
8pc SAE 15º OffsetReversible GeardriveSpanner Set• 5/16- 3/4”
11pc Stubby Metric 15º Offset Reversible Geardrive Spanner Set• 8-19mm
8pc Stubby SAE 15º Offset Reversible Geardrive Spanner Set• 5/16- 3/4”
11pc Flexhead Metric Geardrive Spanner Set• 8- 19mm
8pc FlexheadSAE GeardriveSpanner Set• 5/16- 3/4”
12pc Metric 15º Reversible SpeeddriveCombination Geardrive Spanner Set • 8- 19mm8pc SAE 15º Reversible Speeddrive Combination Geardrive Spanner Set• 5/16- 3/4”
14pc Stubby Flexhead MetricGeardrive Spanner Set• 6- 19mm
9pc Stubby Flexhead SAE Geardrive Spanner Set• 1/4- 3/4”
12pc Metric 0º Speeddrive Combination Geardrive Spanner Set• 8-19mm
8pc SAE 0º Speeddrive Combination Geardrive Spanner Set• 5/16- 3/4” are precisely machined with
deeper gears for greater torque and only require 5º of space for each turn.
SP’s patented Geardrive Spanners
6pc Metric 15º Offset Double Ring Geardrive Spanner Set• 8x9-17x19mm
4pc SAE 15O Offset DoubleRing Geardrive Spanner Set• 5/16x3/8- 11/16x3/4”
SP10222
$169 SP10272
$139
SP10188
$149
SP10131
$149
SP10139
$199
SP10169
$169
SP10109
$149SP10158
$149
SP10389
$129
SP10334
$185
SP10311
$249
SP10358
$179
SP10406
$165SP10454
$115
PAGE 9www. sphandtools.com
MODEL SIZE PRICE SP30216 16oz $22
SP30232 32oz $29
SP30248 48oz $36
MODEL SIZE PRICE SP30166 16oz $28
SP30174 32oz $33
SP30182 48oz $39
MODEL SIZE PRICE SP19310 10x12mm $31.50
SP19315 14x17mm $37.80
SP19317 17x21mm $45
SP19321 18x24mm $54
SP19325 22x24mm $63
SP19328 24x30mm $72
SP19332 30x36mm $79.20
SP19334 36x41mm $133
MODEL SIZE PRICE SP19314 13x17mm $37.80
SP19316 17x19mm $45
SP19319 19x21mm $45
SP19322 19x24mm $58.50
SP19327 24x27mm $63
SP19330 27x32mm $72
SP19333 32x36mm $79.20
SP19335 46x50mm $183
MODEL SIZE PRICE SP19304 19x24mm $49.50
SP19305 21x24mm $49.50
10pc Pin Punch & Chisel Set5pc Cold Chisel Set
R ATCHET PODGER BAR• Best Design for Construction Work• Strong Torque for Heavy Duty Work• Made from Heat-treated Forged Alloy
Steel• Exceeds International Specifications• Professional Plating Prevents
Wrenches from CorrosionCONSTRUCTION WRENCHS
SP GEARDRIVE SPANNERS SP PROFESSIONAL TOOLS
• Chisels: 12, 16, 20, 24 & 29mm • Pin Punches :2, 3, 4, 5, 6, 8 & 10mm• Chisels:12, 20 & 24mm
3pc 200mm Plier/Cutter Set• Includes high leverage combination pliers,
long nose pliers and diagonal cutters
3pc 250mm Locking Plier Set• Curved jaw, straight jaw & long nose
3pc Long Handle Plier Set• Straight, 45 degree & 90 degree
bent long handle pliers
• 6 x slotted screwdrivers• 6 x phillips screwdrivers
• 6 x slotted electrical screwdrivers• 4 x phillips electrical screwdrivers
13pc Impact Driver Set
67pc 1/4”dr Power Bit Set• Includes hexagon, phillips, pozidrive, square slotted,
spanner, torx star, tamper torx, torx plus, spline bits and holder bits
12pc Screwdriver Set in Metal Case
10pc Electrical Screwdriver Set in Metal Case
Dead Blow Hammers Moulded Handle Ball Pein Hammers
• Impact driver• 4 x slotted bits • 4 x phillips bits • 4 x inhex bits
Short Series
SP30821
$59SP30841
$69
SP32903
$99SP32926
$69SP32905
$99
SP39510
$49
SP34030
$39
SP34012
$79
SP34040
$89
NEW
PAGE 10 www. sphandtools.com
MODEL SIZE PRICE
SP35211 150mm/6” $4
SP35213 300mm/12” $9
SP135215 600mm/24” $19
SP35217 1000mm/40” $29
Stainless Steel Rulers
1/2” Dr Micrometer Torque Wrench• 500mm long • 20-200Nm • 15-150ft/lbs
1/2” Micrometer Torque Wrench• 600mm long • 60 – 320Nm torque • 45-220ft/lbs
• 360 degree scale• Support arm included• Can be used for all torque-to-yield
applications(particularly engine head bolts)
•Stainless Hardened• Power On/Off•Graduation 0.01mm/0.0005”
• Includes 0-25mm, 25-50mm & 50-75mm\ micrometers
• Graduation: 0.01mm• Setting gauge including ratchet
stop
9pc Metric MagdriveHex Key Set• 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm
9pc SAE Magdrive Hex Key Set• 1/16”, 5/64”, 3/32”, 1/8”, 5/32”,
3/16”, 1/4”, 5/16” & 3/8”13pc Metric Long Arm Hex Key Set• 2, 2.5, 3, 4, 5, 6, 7, 8, 10, 12,
14,17 & 19mm (2mm without magnetic)
13pc SAE Long ArmHex Key Set• 5/64”, 3/32”, 1/8”,5/32”, 3/16”, 7/32”,1/4”, 5/16”, 3/8”, 1/2”,9/16”, 5/8” & 3/4”(5/64” withoutmagnetic
150mm/6” Metric/SAE Digital Vernier Calipers
200mm/8” Metric/SAE Digital Vernier Calipers
1/2” Dr Angular Torque Gauge 3pc Outside Micrometer Set
SP Torque Wrenches• Easy locking screw adjustment• Automatic reset • Reversible ratchet• Storage case
• Easy to lock and release• 20% thicker blade• 3 times longer life
T-Handle Magnetic Hex Key Sets
• Metric 10pc Set•2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10
•SAE 8pc Set• 5/64, 3/32, 1/8, 5/32, 3/16,
1/4, 5/16, 3/8
SP35350
$199
SP35351
$229 SP35631
$79SP35632
$99
SP35360
$25SP35693
$125
SP35703
$79SP35704
$79
SP34527
$89
SP35526
$89SP34512
$39SP34511
$39
SP35198$6.95
SP35199$6.95
Tape Measure
Metric16mm x 3m
Metric/SAE16mm x 3m/10ft
Magnetic Ball Drive Hex Key JUMBO Set Magnetic Ball Drive Hex Key Set
PAGE 11www. sphandtools.com
•Stainless Hardened• Power On/Off•Graduation 0.01mm/0.0005”
Professional Timing Light with Four Functions Digital Readout and Easy to Read Backlit LCD• Tachometer: 249 to 9,990 RPM (+/- 1% Accuracy)• Advance Degrees (2 and 4 cycle DIS and
Conventional): 0° to 90° (+/-.5° Accuracy)• Dwell: 0° to 180° / 2-12 cylinders (+/-1% Accuracy)• Voltage: 10 to 16 volts DC (+/- 1% Accuracy)• Supplied in blow mould case
Advance Timing Light• Quickly tune-up cars, trucks, marine and
recreational vehicles• Works on conventional and computer
controlled ignition systems• Works on adjustable, non-adjustable
timing systems• Testing range 0-10,000 rpm• Advance degrees 0º to 60º• Supplied in blow mould case
Electrical Digital MultimeterDigital Multimeter With Temperature Probe
• 2000 Counts digital display • Safety design Cat 3 600V• Non-contact ACV detection• Data Hold• Auto Ranging, Auto Power Off• Type K temperature input• Diode Test• Continuity• Pocket Size
• Back Light• Data Hold• Continuing Buzzer• AC/DC Voltage• DC Current• Diode Test• Continuity• Transistor Test
Circuit Tester for General & Hybrid Car• Automatic voltage
identification with blue for 12V and red for 42V systems
Computer-Safe Circuit Tester• Safely tests standard primary
automotive circuits and on-board computer-controlled electrical systems without damaging the micro-processor
• Operates from 3-15 volts • Supplied with 48”
ground wire
Memory Power Supply
• Plugs into cigarette lighter socket
• Retains setting of computers, radios, clocks e.t.c when battery is disconnected
• Attaches to 9 volt battery
• Non Contact Measurement of RPM
• RPM Range 2.5–99,999• Instant and Total RPM
Function• Memory Function• 50mm–2000mm Range
with Reflective Tape• Accuracy +/- 0.05%
Laser Actuated Tachometer
• Heavy duty• Extra long probe
• One-man operation, suitable for turning the engine over for various diagnostic tasks such as compression testing
• Connects to the starter with push button activation
• Features a connectivity LED and 1.5mtr cable
REMOTE STARTER SWITCH
6-24v Long ProbeHeavy Duty CircuitTester
SP62040
$145SP62042
$190
SP62015
$49SP62012
$29SP61054
$13
SP61020
$19SP61014
$29
SP62030
$69SP61052
$25
SP DIAGNOSTIC TOOLS
NEW NEW
NEW
NEW
NEWNEW
NEW
PAGE 12 www. sphandtools.com
• Hold the valves closed whilst spring is compressed
• Requires a 90-125psi air supply
Screw Type Overhead Valve Spring Compressor• Easily remove valve
springs on most cars & light trucks
Engine Cylinder Hone• Range 50mm to 180mm• Three Leg Hone for Removal of Glaze
from Cylinders• Fitted with 100mm Medium Grit Stones• Adjustable Tensioner• Flexible Shaft
2 ARM Brake Cyckiner Hone• Range: 13mm to 50mm• Fitted with 28mm Medium
Grit Stones• Adjustable Tension• Flexible Shaft
3 ARM Brake Cyclinder Hone• Range 19mm to 64mm• Fitted with 28mm Medium Grit Stones• Adjustable Tension• Flexible Shaft
500ml Vacuum Brake Bleeder• Fast Efficient Vacuum
Brake Bleeding• One Man Operation• On-Off Switch
Prevents Spills When Not in Use
• Operates on Compressed Air
• Suitable for push-back & wind-back brake pistons
• Includes both left & right handed thrust bolt assemblies
Cooling System Pressure Tester
• Eliminates the need for adapters to pressure test the cooling system
• Fits bayonet and threaded filler necks
• Identifies cooling system pressure leaks
Flexi Hose Clamp Plier• Fitted with 630mm
Long Cable• For clamp
Diameters from 18mm to 50mm (approx)
Strap Type Oil Filter Wrench - Truck• Capacity: 300mm Dia. 3/8” and 1/2” sq drives• Extra wipe nylon webbing
strap
Cooling System Flushing Gun
• High pressure- High flow• Multi Purpose Cleaning Gun• Quick Efficient High
Pressure Cooling System Flushing
• Multi-Step Nozzle Suits Most Radiator and Heater Hose
3 Prong Oil Filter Wrench 3 Prong Oil Filter
Wrench Reversible• 1/2” Square Drive or Hex Drive• Suits Oil Filters 60mm – 100mm
• Compact design great for confined areas
• Suits oil filters 58 mm to 95mm • 3/8’’ Drive
Compressed Air Adaptor
Brake Piston Rewind Kit
SP66110
$25SP63038
$58SP66012
$58
SP63005
$127
SP72604
$76 SP70850
$99
SP70800
$195SP63036
$20SP63035
$18
SP70801
$69SP64012
$35SP64001
$14SP64000
$19
SP SPECIALTY TOOLS
Clamp Styles
NEW NEW
NEW
NEW
PAGE 13www. sphandtools.com
MODEL SIZE PRICE
SP67061 10-30mm $22SP67062 30-50mm $30SP67063 50-75mm $40SP67064 75-105mm $52
Bearing Packer (Cup Style)• Self-contained, saves time and can be
used anywhere• No air line or grease gun required• Packs 50-60 bearings without refilling• Transparent, impact resistant cup
allows grease level check• Works on bearings up to 90mm O.D
10pc Bearing Race & Seal Driver Set• Designed to Allow
Operator to Install Bearing Cases & Seals Without Damage
• Ideal for installing Wheel Bearing Outer Races
• 39.5mm – 81mm
Master Puller Set• Includes two/three way yoke, 4pc
tips, metric & SAE bolt sets & 2pc centre screw for puller
• Works on harmonic balancers, steering wheels, crankshaft pullers and gears
Bearing Separators
Timing Belt Service Kit
Camshaft Pulley Remover/Installation Kit• Designed to hold
the camshaft pulley stationary while loosening & tightening the centre shaft bolt
• Fixed distance 54 - 120mm
SP FORD FAN HUB SPANNER 32MM
SP FORD FAN HUB SPANNER 36MM
6pc Belt Tensioner Serpentine Tool Set
Complete Kit for Timing Belt Replacement and Service
• Suitable for fast removal and installation of E-Rings without damage.
• Reversible blades hold E-Ring in place for easy installation
E Ring Tool Kit
• Contains 3/8”dr sockets 13, 15, 16 & 18mm• Essential tool for removing & installing timing belts with spring loaded idler pulleys• Long reach design with multi-positional extension allows access deep into the engine
compartment & around obstructions
Timing gear holder• Securely holds the timing gear during
removal or installation• Prevents timing gear movement while the
retaining bolt is removed• Allows rotation of cam gear to align valve
timing marks• Single lever locking design is easy to use• Slimline design allows maximum access
Single CamClamps• Single CamClamps lock each gear
individually during timing belt replacement• Holds valve timing during belt replacement• Compact size allows use in confined engine
compartments• Easy to use installs in seconds
SP30888
$39
SP32380
$29SP71065
$69
SP72732
$28
SP72736
$28
SP67038
$124
SP70907
$195
SP66040
$169SP71055
$49
SP SPECIALTY TOOLS SP SPECIALTY TOOLS
NEW
NEW
PAGE 14 www. sphandtools.com
MODEL SIZE PRICE
SP31211 9-12mm $14SP31212 12-16mm $17SP31213 16-22mm $21SP31214 22-27mm $25
SP SPECIALTY TOOLS
External & Internal Thread Files• Restores damaged threads
• 0.80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50 & 3.00mm
• TPI 11, 12, 13, 14, 15, 18, 20 & 24
42pc Automotive Rethreading Master Kit - Metric• Taps and dies are suitable for chasing
out damaged threads and the removal of nicks and burrs without undercutting good threads
• Thread file restores damaged external threads on any diameter, right or left hand
Nut Splitter • Splitting of seized nuts without
damaging the thread
Stud Removal & Insert Set 28pcs• Uniquely designed tool for the removal
and installation of studs without damaging the threads
• Each thread size uses one tool for removal and one for installation
• Metric Sizes: M6 x 1.0 - M10 x 1.5mm• Inch sizes: 1/4-20 - 1/2-20• Include two L Key
• Suitable for the removal and installation of various sizes of studs
• Use with 1/2”sq drive ratchet wrench• Capacity 10-19mm (3/8”-3/4”)
Stud Removal & Installation Tool
• 4x Stud Extractors and a Go-Thru’ ratchet Spanner
• Short, for Tight Restricted Areas
• Size: 6, 8, 10, 12 Sockets plus 14mm &17mm Go-thru’ Ratchet
Stud Remover Set 5pc
• Remove broken studs, screws, bolts etc
• Square section aids removal of extractor from screws
• Contents: 1/8”, 3/16”,15/64”, 5/16” & 3/8”
5pc Screw Extractor Set
Screw Extractor Set 15pc• Provides an efficient method
for extracting broken machine screw, studs, cap screws and other types of threaded fasteners that have been partially destroyed preventing their normal removal
• Extracts damaged threads from 6mm-14mm
• Easily remove and install camshaft and crankshaft seals in all domestic and import passenger cars, light trucks and SUV’s• Compact puller with unique extracting hooks engage seal for quick removal• Suits seals from 21.5mm to 64mm
Seal Tool Kit
SP31305
$49SP31306
$49SP31310
$158
SP31255
$199SP31253
$72
SP31315
$89SP31251
$35
SP31302
$25SP70960
$259
NEWNEW
NEW
PAGE 15www. sphandtools.com
SP SPECIALTY TOOLS• A BASIC SET FOR DIESEL WORK• Tester has a Handy Deflator for Releasing Air & Retesting• A 16-1/2” Wire Reinforced Hydraulic Hose has a Quick Coupler on a Swivel for ease of Connection• A 2-1/2” Gauge with Easy to Read Red & Black Dial with Snap-in Lens• Records Pressures from 0-1000psi and 0-70 Bar
Automotive Diesel Compression Tester Set
Diesel Injection System Priming Device
• Essential for reintroduction of fuel into fuel pump following maintenance, such as fitting of new diesel filter or following drainage of fuel tank
Diesel Leak Back Test Kit• Specially designed to test the return
flow fuel pressure from PIEZO diesel common rail injectors on Bosch, Delphi and Siemens systems
• Supplied with two gauges, -1 to +3 bar and -1 to +15 bar
• Sight-glass that identifies air in the fuel system and drain valve allows safe recovery of fuel
Diesel Injector Removal Set 4pc• Adaptors can also be used with an air tool to
loosen the injectors by vibration.• Specificalcy designed for removing delphi/bosch diesel injectors• Can be used with any slide hammer with 5/8’’ unf thread
Slide Hammer Puller Kit• External & Internal 2 & 3 jaw pullers, grip wrench adaptor,
lip puller, hub puller & dent puller• 2.5kg slide hammer with 570mm shaft
Engine Oil Pressure• Adaptors for domestic and
foreign cars• 610mm flexible hose• Pressure scale: 0-100psi /
0-700kpa
Cylinder Leak Detector & Crank Stopper• Pinpoints Low Compression
Cause ie Burnt Valves, Worn Rings etc• Crank Stopper Locks Engine in
Place to Facilitate Installation of Timing Belts, Removal of Harmonic Balance Pulleys
• Supplied with 14mm Adaptor, 14mm Deep Adaptor & 18mm Adaptor
• Gauges Show % of Cylinder Leakage & Cylinder Pressure
• Suitable for Use on Any Petrol Engine with 14 or 18mm Spark Plugs
TDC Indicator (Top Dead Centre)• A pneumatic indicator for finding top dead centre (TDC) position on Petrol
and Diesel engines• Adaptors for 8mm to 18mm spark plug and glow plug holes• Application: Diesel and Petrol engines for car and vans
High-Res Video Borescope with 6MM Dia Camera• 3.2’’ colour TFT LCD screen• Flexible, waterproof gooseneck
imager head that easily performs visual inspections in hard to reach areas
• High visibility and 10 degree adjustable LED lighting
• Allows user to view image on LCD monitor and displays the current time and date
• Support SD memory card extension with built-in 75m flash capacity
• Menu with multi-national languages• Supplied in blow mould case
SP66037
$280SP66067
$185
SP66066
$34SP66085
$89
SP66069
$29
SP71030
$56SP67048
$159
SP70935
$449SP66027
$199
NEW
NEW
NEW
NEW
PAGE 16 www. sphandtools.com
Safety Wire Twisting Pliers
1/4’’, 3/8’’, 1/2’’ Driver Quick lock Socket Holding Rail• Holds up to 15 pcs
4.5kg Magnetic Pick-Up Tool• Extends 190-760mm
6.8kg Magnetic Pick-Up Tool• Extends 190-760mm
Telescopic Magnetic Pick-Up Tools• Strong & Lightweight Stainless Steel Shaft• PVC Comfortable Cushion Handle
4pc Mini Hook & Pick Set• Combination hook, 90 degree pick, straight pick & hook pick
1/4’’, 3/8’’, 1/2’’ Drive Socket Holding Rail• Holds up to 16 pcs
Straight Type Universal Hose Clamp Plier Set• Set of pliers with
interchangeable tips to cover all types of hose clamps
65pce Heat Shrink Tube Kit With Gas Torch• Material: Polyethylene• Operating temperature: -55 °C~
+125 °C• Shrink temperature: Start at 70
°C; Shrunk totally at 110 °C• Shrink Ratio: 2:1• Maximum Electrical Rating:
600 Volts
Automatic Wire Strippers• 200mm Wire Stripper for
0.2-6.0mm2• Crimps insulated Non
insulated terminals• Wire cutter
4.0mm Insulated & OpenBarrel Terminal Crimper
65mm x 40mm Telescopic Inspection Mirror with two LED Lights Extends from 290mm to 870mm.
57mm Round Telescopic Inspection Mirror with a LED Light Extends from 290mm to 870mm.
55mm Round Telescopic Inspection Mirror with two LED Lights Extends from 290mm to 870mm.
SP32597
$99SP32595
$57
SP32278
$28SP32282
$29
SP201RQL
$15
SP32293
$49SP30843
$29SP72610
$45
SP202RQL
$16SP203RQL
$18
SP31410
$24
SP201R$9
SP202R$10
SP203R$11
SP31412
$24
SP31414
$21
• 150mm• Automatic spring
return• Ideal for motor
mechanics and aviation industry
• 150mm• Allows you to switch
from clockwise to counter clockwise
• Reversing mechanism features a position lock and stays engaged under all conditions.
Reversible
SP31512
$22SP31513
$22
1/4’’ 3/8’’ 1/2’’ 1/4’’ 3/8’’ 1/2’’
NEW
NEWNEW
NEW
PAGE 17www. sphandtools.com
MODEL SIZE PRICE
SP68887 MEDIUM $29SP68888 LARGE $29SP68889 X-LARGE $29
RECHARGEABLE LIGHTING
SP PROFESSIONAL TOOLS
HEAVY DUTY SHOP SEAT - BALL BEARING CASTORS
HEAVY DUTY SWIVEL SEAT WITH STORAGE
HEAVY DUTY SWIVEL SEAT
GARAGE CREEPER
LED Magbase WorkLight Brilliant
LED Magbase Work Pocket Light
Hand Held LED Inspection Light
• 8 ltr• 520x390x150mm
· Super Slim Design for hard to reach area· Special optical lens offering 90 degrees flood light compared to 30 degrees from normal work light
SMD LED SLIMLINE WORK LIGHT
LED Pocket Inspection Light• Ultra bright with dual function
torch & lamp• Ultra compact• Light weight• Magnetic
Video Borescope with 9mm Dia Camera· 2.4’’ colour TFT LCD screen· Flexible, waterproof gooseneck imager head that easily performs visual inspections in hard to reach areas
· High visibility and 6 degree adjustable LED lighting
· Rechargeable battery with USB cable SP70925
$199
SPR-50$129
SPR-55$129
SPR-60$129
SPR-44$69
SP81470
$89
SP81456$99
SP81445
$79
SP81441
$19.95
SP81442
$85
SP64108
$22.50
SP64116
$31.50
Oil/Fluid Drain Pan• 16 ltr• 600x450x180mm
· SMD (Surface Mount) LED gives off very little heat· 180 Degree Light Spread (Compared to 30 Degree Standard LED)· Fluorescent Effect
· SMD LED Magbase Work Pocket Light
· Super Brilliant· 250% Brighter
· SMD LED Magbase Work Light· Super Brilliant· 250% Brighter
NEW
NEW
NEW
PAGE 18 www. sphandtools.com
12v 2 peak mini 3/8’’ dr drill Speed L:0-530rpm H:0-2250rpm12v peak mini 3/8’’ dr impact wrench Speed: 2200rpm12v peak LED mini flashlight Brightness: 28pc LED/160Lux 4pc LED/ 50Lux
12v Mechanics 3pc Combo Kit
SP82150
12v Mini Ratchet• 3/8” capacity • Torque: 80N-m• No-Load Speed: 250rpm• Charging Time: 1 hour auto cut-off
12v 3/8” Impact Wrench• 3/8” capacity • No-Load Speed: 2200rpm• Torque: 105N-m • Charging Time: 1 hour auto
cut-off
• 50mm (2”) • 8,000rpm• Charging Time: 1
hour auto cut-off
18v INDUSTRIAL Angle Grinder
18v INDUSTRIAL HIGH SPEED DRILL• Cordless High Speed Drill• 1/2” cap, steel chuck• 2 Speed: Low 0-700rpm, High
0-2400rpm• Charging Time: 1 hour auto cut-off
3/8” DrINDUSTRIAL2 Speed Mini Drill• 12v platform• 2 speed: Low 0-530rpm, High 0-2250rpm• Charging Time: 1 hour auto cut-off
2pc Construction 12v Combo Kit12v Gasket SanderRivetor• 3/16” capacity pop riveter• 12v Riveter• 220pc (4.8mm x 10mm) Working Capacity• Powerful motor with replacable carbon brush.
• Wheel size 4-1/2’’ (115mm)
• Powerful DC motor provides continual grinding durability
Drill• 3/8” capacity drill 2250rpm• Ideal for all high speed drilling• 12v 2Speed Mini 3/8” Drill• Two adjustable speed controller.• Speed:- L: 0~360rpm H: 0~2250rpm• Powerful motor with replacable carbon brush.
PROFESSIONAL CORDLESS TOOLS
SP82140
$399
SP81342
$249SP82150
$399
SP81613
$289SP81308BU
$179
SP81212
$199SP81233
$349
SP81112
$279
Skin Only
PAGE 19www. sphandtools.com
• 12000rpm• 50mm cap.• Air Con: 469L/min Max 330L/min Avg
AIR Sander Gasket
• 950ft/lbs torque• High torque hammers deliver power fast• Air Con: 971L/min Max 291L/min Avg
3/8” Dr Ratchet Wrench• 254mm • 160rpm • 124ft/lbs• Air Con: 525L/min Max 158L/min Avg
1/2” Dr Industrial ReversiblePistol Drill• 500rpm• Air Con: 546L/min Max 382L/min Avg
1/2” Dr Impact Wrench• 2.5kg• Max torque 425ft/lbs• Air Con: 808L/min Max 242L/min Avg
1/2” Dr Impact Wrench• 2.58kg• Max torque 600ft/lbs• Air Con: 876L/min Max 261L/min Avg
3/4” Dr Impact Wrench
• 10 - 19mm 12pt deep sockets
• 3/8” dr 200mm flex handle
• 3/8” dr mini air ratchet• Air Con: 485L/min Max 146L/min Avg
1/4” Dr Die Grinder• Rib textured handle• 23000rpm• Air Con: 603L/min Max 422L/min Avg
125mm Industrial Angle Grinder
100mm IndustrialAngle Grinder
1/4”dr 90 Degree Angle Head Die Grinder• 160mm • 21000rpm • Air Con: 506L/min Max, 354L/min Avg
Industrial Chisel Gun• 3800/min• 10.2mm capacity• Air Con: 404L/min Max 283L/min Avg
3/8” Dr Mini RatchetWrench Set
1/2” Dr Ratchet Wrench• 254mm • 160rpm • 124ft/lbs
5” Disc Sander• 15000rpm• 125mm capacity• Air Con: 808L/min Max 730L/min Avg
• 12,000rpm• Air Con: 566L/min Max 509L/min Avg
SP PROFESSIONAL AIR TOOLSPROFESSIONAL CORDLESS TOOLS
SP-1762S
$199
SP-1410
$249SP-1330H
$199
SP-1156TR
$599SP-1145A
$199SP-1140EX
$299
SP-1527
$299
SP-2200AH
$149
SP-1254
$399
SP-1257
$399SP-1210
$149
SP-1133SX
$169SP-1133SX-2
$169
SP-1350
$199
PAGE 20 www. sphandtools.com
• 4400bpm• 19 x 3mm needles• Weight 2.88kg
• 4.8mm (3/16”) max capacity• 90psi• Weight 1.64kg
3/8” Dr Reversible Drill• 1800rpm free speed
• 10000rpm• 1.6mm steel capacity• 10mm stroke length
• 1lt pot• 50psi• 1.22kg
• Tyre inflator and deflator• Dial gauge• High quality hose and fittings• High torque hammers
deliver power fast• Perfect for automotive mechanical work with 280ft/lbs torque
• 175mm long• 22000rpm• 1/4” collet
• 180mm • 230rpm• 10mm bolt capacity• Torque 30ft/lbs
• 10mm x 30m Air Hose with Nitto Type Fittings
• 10mm x 15m Air Hose with Nitto Type Fittings
• 10mm PVC hose
• 25 micronm filter• 2000L/min rated flow• Set pressure: 8-125psi
• 25 micron filter• 4000L/min rated flow• Set pressure: 8-125psi• Air shutoff drain
Needle Scaler
3/16” Cap PistolType Pop Rivetor
Air Saw
1.8mm Nozzle HighPressure Spray Gun
Trade Tyre Inflator1/2” Dr Impact Gun
3/8” Dr Mini Ratchet Wrench
1/4” Dr Die Grinder
15m Auto RetractableAir Hose Reel
1/4” FilterRegulator
1/2” FilterRegulator
10mm Belt Sander• 16,000rpm free speed
6” Random Orbital Sander• 10,000rpm free speed
Fitted Air Hose
SXJ-268
$199
TAR-40
$129SX-530
$99
SX-313
$99
SX60-2
$59
S-900
$99SX-225
$99
SX-201
$89
SFR-302
$59
I66-30N
$59I66-15N
$29
RHR15
$99
SX-323
$89
SFR-404
$89
SX-310
$175SX-271
$199
Features:• Triple cylinder compressor pump with cast iron crankshaft and cylinder.• Steel valve plate with stainless steel valves.• Overload protection of electric motor with thermal relay.• On/off pressure switch.• Drain cock.• Filter/Regulator.
PAGE 21www. sphandtools.com
TRIPLE CAST IRON INDUSTRIAL AIR COMPRESSOR
PICTURED XRS1800
2.5hp Portable Air Compressor Kit• SP12-50 air compressor• SP-9350 construction series framing gun• SP-9255 construction series angle finish nailer• SP-9660 construction series coil nailer• I66-30N 10mm x 30m air hose with nitto type fittings
2hp Trade Duty Portable AirCompressor• Direct drive • 120psi • Regulator• 10lt tank • 10amp/240volt• FAD 127L/min
Construction Series Coil Nailer• Drives standard coil wire/ plastic sheet collation nails from 1-12” to 2-1/2” x .090 to .099
ConstructionSeries FlooringStapler/Nailer
• 15-1/2 Ga 92pcstaples and
16Ga 100pc“L” cleat load
capacity
TWIN CAST IRON INDUSTRIAL COMPRESSOR
2.2hp Cast IronV-Twin Portable Air Compressor• 150psi • Filter/regular• 50lt tank• Fad 186L/min
MODEL HP TANK FAD PRICE XRS18 3hp 60 309L/min $995
XRS1800 3hp 100 309L/min $1190
MODEL HP FAD PRICE XRV14 2.5hp 225L/min $699
XRV17 3hp 251L/min $799
MODEL HP TANK FAD PRICE XRS25 5.5hp 200 482L/min $1950
XRS35 7.5hp 270 704L/min $2585
XRS50 10hp 270 1085L/min $2985
ELECTRIC STATIONARY 3 PHASE AIR COMPRESSORS
• Tank size 50 Litres
PICTURED XRS25
Features:• Twin or Triple cylinder compressor pump with cast iron crankshaft and cylinder.• Steel valve plate with stainless steel valves.• Overload protection of electric motor with thermal relay.• Independent 3 phase switch box operates by a single phase relay pressure switch.
Features:• Steel valve plate with stainless steel valves.• Alloy head and after coolers for more efficient air delivery.• Zero pressure start up valve to help extend the life of the electric
motor and capacitors. • Overload protection of electric motor with thermal relay.• On/off pressure switch. • Filter/Regulator.
COMPRESSED AIR SOLUTIONS
SP12-50KIT3
$999
SP13-50
$649
SP11-10
$299
SP-9200
$299
SP-9665
$299
To Choose from 24 Compressor Models Visit: sphandtools.com
PAGE 22 www. sphandtools.com
GENERATORS
5.5hp Pressure Washer• 5.5hp OHV Torini engine• 2200psi working pressure• 8.3L/min water flow• 8m hose• Stainless steel lance
2.6hp Domestic Pressure Washer• 2.6hp OHV Torini engine•1400psi working pressure• 5.5L/min water flow• 8m hose• Stainless steel lance
General Purpose• Safe for plants• Penetrates & lifts dirt
& grime
Concrete Surfaces• Safe on most cement & masonry surfaces• Breaks down grease,
oil & grime
1400w ElectricPressure Washer• Max pressure 1600psi• 6.16L/min flow rate• 5m hose• Adjustable pencilpoint/fan jet lance• Foam gun• Aluminium pump
1700w ElectricPressure Washer• Max pressure 1885psi• 6.16L/min flow rate• 5.5m hose• Adj pencil point/fan jet lance• Turbo lance • Foam gun• Hose reel storage• Aluminium pump
1800w ElectricPressure Washer• Max pressure 2050psi• 7L/min flow rate• 2 wheel trolley • Alloy pump• Auto throttle stop• 5m cable • Water filter• Turbo nozzle• 8m reinforced hose• Semi industrial
2100w ElectricPressure Washer• 7L/min flow rate• 2030psi max pressure• 8m steel braided hose• Aluminium pump• Semi industrial
2800w ElectricPressure Washer• Max pressure 2300psi• Aluminium pump withstainless steel plunges• 8m hose • Turbo lance• 15amp plug• Industrial
MODEL HP KVA START PRICE
SC2500 6.5hp 2.5kva Pull Start $395
House Wash Pictured
PRESURE WASHERS, GENERATORS
PETROL POWERED
MODEL HP KVA START PRICE
SL3500 6.5hp 3.5kva Pull Start $599SL6800E 13hp 6.8kva Electric Start $1199
GENERATORS
House Wash• Penetrates and lifts heavy grime and oil
PETROL POWERED
SPW1600P
$399SPW2500P
$499
SPW141
$149
SPW383
$249
SPW445
$369
SPW490
$499
SPW590
$599
HW2$10
2Ltr
CC2$10
GP2$10
Bonus Wheel Kit With
PAGE 23www. sphandtools.com
15hp Pressure Cleaner• 15hp OHV Torini engine • 3400rpm • 10m hose • Stainless steel lance • 4000psi working pressure• 18.2L/min water flow• Heavy duty powder coated folding frame
6.5hp Pressure Cleaner• 6.5hp OHV Torini engine• 3550rpm • 8m hose• Stainless steel lance• 3200psi working pressure• 9.5L/min water flow
MODEL HP KVA START PRICE
SW2800 6.5hp 2.8kva Pull Start $599SW4000 7hp 4kva Pull Start $799SW6800E 13hp 6.8kva Electric Start $1295SW8100E 15hp 8.1kva Electric Start $1995
• Max 2000w, rated 1600w• From 52dB(A)• 4.1lt tank capacity• Pull start• Parallel connection capable• Parallel connection cable
included• Meets EPA & CARP
standards
3.2hp Inverter Generator
Hand Held LED Inspection Light(Fluorescent Effect)
Torini uses a superior AVR* equipped with a Digital Stability Control Program. This allows voltage to be calculated and controlled at the outlet, not the alternator, with Hi-Lo Limit Safety Shut Off makes Torini most advanced generators combined with ease of operation with strong rugged design to offer one the world’s most reliable and dependable range of generators.
Torini use leading edge alternator and electronic technology to offer a range of generators that produce very pure energy supply. This clean and pure form of energy makes Torini Generators suitabie to power even the most delicate electronic devices eg: laptop.
13hp Welder/Generator• Combination 6.8kva AC Generator ans Manual DC
ARC/DC TIG Welder• 725mm x 583mm x 562mm
PRESURE WASHERS, GENERATORSPRESURE WASHERS, GENERATORS
TPW4500Pictured
For the worlds most reliable and dependable range on Generators combining ease of operation, Strong Rugged design and leading edge technology Torini have fitted IP66* Rated power outlets and RCD to their already famous professional generators to offer the most robust generators available to the Building and Construction industry.
TPW4500
$1595TPW3600
$799
T81470BONUS
TI2000
$995
MODEL HP KVA START WHEEL KIT & BATTERY PRICE
SWC4000 7hp 4kva Pull wheel kit only $895SWC6800E 13hp 6.8kva Electric YES $1495SWC8100E 15hp 8.1kva Electric YES $2195
TWG65MT
$2995
W E L D E RType DC ARC-Welding/DC TIG Welding
Current Output (A) MMA=116a @ 100%/150a @ 60%TIG=155a @ 100%/200a @ 60%
Voltage Output (v) MMA=26v/150aTIG=18v/200a
Start High Frequency Start
G E N E R AT O RMax Watts 5500w
Rated Watts 5000w
Power Outlets 2
Start Electric (battery included)
Fuel Capity 25 Litres
CONSTRUCTION SERIES GENERATORS
PAGE 24 www. sphandtools.com
1/2” Dr INDUSTRIAL Impact Wrench• 18v platform• 6 torque Value selections• 550N-m max torque• Charging Time: 1 hour auto cut-off
SP81128
$699
All prices include GST. Not all products in this brochure are available from all outlets. Prices may vary in some country areas due to freight costs. All products in this brochure were available at the time of printing. Austech Indusries will do everything possible within reason, to maintain stocks of products advertised but cannot be responsible for unforeseen shortfalls beyond their control. E & O Copyright.www.sphandtools.com
There is Now a Workshop Version of SP’s Most Powerfull Gun. The V8 Supercar Gun.
The SP / V8 supercar gun operates on nitrogen at 280psi , it is 1” drive
and has a motor speed of 9000rpm in reverse and 8200rpm in forward.
A top performing pit crew will replace four wheels in under 4 seconds.
1/2”DR RACE SERIES IMPACT WRENCH• 695ft/lbs• Details to be clarified
1/2”DR RACE SERIES IMPACT WRENCH• 900ft/lbs• Details to be clarified
3/4”DR RACE SERIES IMPACT WRENCH• 1500ft/lbs• Details to be clarified
SP-9140
$299
SP-9145
$399
SP-9150
$995