Source Control Drawing - Mouser
Transcript of Source Control Drawing - Mouser
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (1) of (12) Abracon Drawing # 600616 Revision #: M
√
Source Control Drawing
Part Description: CERAMIC WIRE WOUND INDUCTORS
Customer Part Number:
Abracon Part Number: AISC-0603 series
Customer Approval
(Please return this copy as a certification of your approval)
Approved by:
Approval Date:
Internal Use Only
500889 500320
Revision History
Revision ECO Description Date Prep’d
By
Ck’d
By
Ck’d
By
Appr’d
By
A - Initial release 6/2/2001 TC
B M022 Update Q test frequency 7/14/2002 TC
C M036 Add 11nH, updated dimension 1/30/2003 TC
D M037 Add RoHS compliance status 8/4/2004 TC
E M112 Add 37nH 12/14/2004 TC
F M293 Add epoxy packaging option 9/4/2007 HS
PROPRIETARY NOTICE
These documents, and the contained information
herein, are proprietary and are not to be reproduced,
used or disclosed to others for manufacture or for
any other purpose, except as specifically authorized,
in writing, by ABRACON Corporation.
Abracon Corporation Headquarters:
30332 Esperanza
Rancho Santa Margarita, CA-92688
Ph: (949) 546-8000
Fax: (949) 546-8001
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (2) of (12) Abracon Drawing # 600616 Revision #: M
√
Revision History (Continued)
Revision ECO Description Date Prep’d
By
Ck’d
By
Ck’d
By
Appr’d
By
G M300
Add more revision, dimension and epoxy
information, change note for packaging and dimension
9/25/2007 HS
H M305 Update format, change to full epoxy coverage, add
more information 11/13/2007
HS
I M389 Revise the electrical specs and T&C of Sale 11/7/2008 YH
J M490 Updated operating temperature and storage
temperature . Changed to word format. 2/25/2011 JY HU CB JE
k M494
Updated Electrical Spec, Part Number Identification,
Mechanical Dimensions, Reliability Tests, Reflow Profile, Packing. Added Materials. (PCN/ECN)
3/10/2011 JY HU CB JE
L M528 Added 500320 to internal code. 6/20/2011 JY HU CB JE
M M737 Remove 1.6nH and 1.7nH. Revise RoHS and plating.
Add MSL. 6/14/2013 JY SR CB JE
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (3) of (12) Abracon Drawing # 600616 Revision #: M
√
1.0 Key Electrical Specifications
Part Number
AISC-0603-
Inductance Code
Inductance Tolerance
Min.
Quality
Factor
L/Q Test
Freq.
Max. DC
Resistance
Max. Rated
Current
Min. Self-resonant
Frequency
Units nH - - MHz Ω mA MHz
Symbol L - Q Freq. DCR Ir S.R.F
AISC-0603-R0018 1.8 C, S, D J, K 18 250 0.043 1000 > 6000
AISC-0603-R0027 2.7 C, S, D J, K 25 250 0.043 1000 > 6000
AISC-0603-R0033 3.3 C, S, D J, K 25 250 0.059 850 > 6000
AISC-0603-R0036 3.6 C, S, D J, K 25 250 0.059 850 > 6000
AISC-0603-R0039 3.9 C, S, D J, K 25 250 0.059 850 > 6000
AISC-0603-R0043 4.3 C, S, D J, K 25 250 0.059 850 > 6000
AISC-0603-R0047 4.7 C, S, D J, K 25 250 0.065 800 > 6000
AISC-0603-R0051 5.1 C, S, D J, K 21 250 0.130 600 > 6000
AISC-0603-R0062 6.2 C, S, D J, K 29 250 0.095 700 > 6000
AISC-0603-R0068 6.8 C, S, D, G, J, K 29 250 0.095 700 > 6000
AISC-0603-R0075 7.5 C, S, D, G, J, K 33 250 0.095 700 > 6000
AISC-0603-R0082 8.2 C, S, D, G, J, K 31 250 0.095 700 > 6000
AISC-0603-R0087 8.7 C, S, D, G, J, K 31 250 0.095 700 > 6000
AISC-0603-R0091 9.1 C, S, D, G, J, K 30 250 0.120 620 6000
AISC-0603-R0095 9.5 C, S, D, G, J, K 26 250 0.160 540 6000
AISC-0603-R010 10 C, S, D, G, J, K 30 250 0.130 600 6000
AISC-0603-R011 11 C, S, D, G, J, K 35 250 0.130 600 6000
AISC-0603-R012 12 C, S, D, G, J, K 35 250 0.130 600 6000
AISC-0603-R013 13 C, S, D, G, J, K 35 250 0.130 600 6000
AISC-0603-R015 15 C, S, D, G, J, K 37 250 0.150 550 6000
AISC-0603-R016 16 C, S, D, G, J, K 37 250 0.150 550 5500
AISC-0603-R018 18 C, S, D, G, J, K 37 250 0.150 550 5500
AISC-0603-R020 20 C, S, D, G, J, K 37 250 0.150 550 4900
AISC-0603-R022 22 C, S, D, G, J, K 38 250 0.190 490 4600
AISC-0603-R023 23 C, S, D, G, J, K 40 250 0.190 490 3800
AISC-0603-R024 24 C, S, D, G, J, K 40 250 0.190 490 3800
AISC-0603-R025 25 C, S, D, G, J, K 40 250 0.190 490 3700
AISC-0603-R027 27 C, S, D, G, J, K 38 250 0.190 490 3700
AISC-0603-R030 30 C, S, D, G, J, K 38 250 0.210 470 3300
AISC-0603-R033 33 C, S, D, G, J, K 40 250 0.210 470 3200
AISC-0603-R036 36 C, S, D, G, J, K 40 250 0.220 460 2900
AISC-0603-R039 39 C, S, D, G, J, K 40 250 0.220 460 2800
AISC-0603-R043 43 C, S, D, G, J, K 40 250 0.270 400 2700
AISC-0603-R047 47 C, S, D, G, J, K 36 200 0.270 400 2600
AISC-0603-R051 51 C, S, D, G, J, K 35 200 0.300 390 2400
AISC-0603-R056 56 C, S, D, G, J, K 38 200 0.350 360 2400
AISC-0603-R062 62 C, S, D, G, J, K 36 200 0.380 350 2300
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (4) of (12) Abracon Drawing # 600616 Revision #: M
√
1
10
100
1000
10000
10 100 1000 10000
SDWL1608C3N9□STFSDWL1608C47N□STFSDWL1608CR33□STF
47nH
330nH
3.9nH
1.0 Key Electrical Specifications (Con’d)
Part Number
AISC-0603-
Inductance Code
Inductance Tolerance
Min.
Quality
Factor
L/Q Test
Freq.
Max. DC
Resistance
Max. Rated
Current
Min. Self-resonant
Frequency
Units nH - - MHz Ω mA MHz
Symbol L - Q Freq. DCR Ir S.R.F
AISC-0603-R068 68 C, S, D, G, J, K 36 200 0.380 350 2200
AISC-0603-R072 72 C, S, D, G, J, K 34 150 0.430 320 2100
AISC-0603-R082 82 C, S, D, G, J, K 34 150 0.500 300 2000
AISC-0603-R091 91 C, S, D, G, J, K 34 150 0.520 300 1900
AISC-0603-R10 100 C, S, D, G, J, K 31 150 0.660 260 1800
AISC-0603-R11 110 C, S, D, G, J, K 32 150 0.730 250 1700
AISC-0603-R12 120 C, S, D, G, J, K 32 150 0.750 240 1600
AISC-0603-R15 150 C, S, D, G, J, K 32 150 1.120 200 1400
AISC-0603-R16 160 C, S, D, G, J, K 32 150 1.120 200 1400
AISC-0603-R18 180 C, S, D, G, J, K 25 100 1.380 180 1300
AISC-0603-R20 200 C, S, D, G, J, K 25 100 1.900 150 1250
AISC-0603-R22 220 C, S, D, G, J, K 25 100 2.100 140 1200
AISC-0603-R25 250 C, S, D, G, J, K 25 100 2.800 120 1100
AISC-0603-R27 270 C, S, D, G, J, K 26 100 3.000 120 960
AISC-0603-R33 330 C, S, D, G, J, K 26 100 4.200 100 800
AISC-0603-R39 390 C, S, D, G, J, K 27 100 4.500 100 800
AISC-0603-R42 420 C, S, D, G, J, K 27 100 5.400 90 800
AISC-0603-R47 470 C, S, D, G, J, K 27 100 5.700 90 700
AISC-0603-R56 560 C, S, D, G, J, K 27 100 8.100 70 650
Definition of Rated Current (Ir): Ir is direct electric current as chip surface temperature rose just 20℃ against
chip initial surface temperature (Ta)
0
20
40
60
80
100
120
140
10 100 1000 10000
Q
SDWL1608C3N9□STF
SDWL1608C47N□STF
SDWL1608CR33□STF
330nH 47nH
3.9nH
R047
R0039
R33
R047
R0039
R33
Frequency (MHz) Frequency (MHz)
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (5) of (12) Abracon Drawing # 600616 Revision #: M
√
1.1 Operating Temperature: -40ºC to +125ºC
1.2 Storage Temperature: -10ºC to +40ºC, 70% RH max.
2.0 AISC-0603 is RoHS/RoHS II Compliant.
3.0 MSL level: 1
4.0 Part Number Identification
AISC-0603- -
Inductance Code
Tolerance
Code Packaging
Please refer to the Table
C: ± 0.2nH
T: 3kpcs/reel
S: ± 0.3nH
D: ± 0.5nH
G: ±2%
J: ±5%
K: ±10%
5.0 Marking: No Marking
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (6) of (12) Abracon Drawing # 600616 Revision #: M
√
6.0 Mechanical Dimensions
Dimension: mm
6.1 Materials
A MAX. B MAX. C MAX. D REF. E REF. F REF. H REF. I REF. J REF.
1.8 1.12 1.02 0.38 0.80 0.30 1.02 0.64 0.64
No. Components Material
A Coating Ultraviolet epoxy resin
B Core Ceramic
C Wire Polyurethane system enameled copper wire
D Electrodes Ag-Pd with Ni and Au plating
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (7) of (12) Abracon Drawing # 600616 Revision #: M
√
6.0 Reliability Tests Conditions
Items Requirements Test Methods and Remarks
1. Terminal Strength No removal or split of the termination or other defects shall
occur. ① Solder the inductor to the testing jig (glass
epoxy board as shown in Fig 1) using eutectic solder. Then
apply a force in the direction of the arrow.
② 7N force.
③ Keep time: 10±1s
④ Speed: 1.0 mm/s.
2. Resistance to Flexure No visible mechanical damage. ① Solder the inductor to the test jig. Using a eutectic solder.
Then apply a force in the direction shown as Fig 2.
② Flexure: 2mm
③ Pressurizing Speed: 0.5mm/sec.
④ Keep time: 5sec.
3. Vibration ① No visible mechanical damage.
② Inductance change: within ±5%
③ Q factor change: within ±20%
① Solder the inductor to the testing jig (glass epoxy board
shown in Fig 3 )using eutectic solder.
② The inductor shall be subjected to a simple harmonic
motion having total amplitude of 1.5mm, the frequency
being varied uniformly between the approximate limits of
10 and 55 Hz.
③ The frequency range from 10 to 55 Hz and return to 10 Hz
shall be traversed in approximately 1 minute. This motion
shall be applied for a period of 2 hours in each 3 mutually
perpendicular directions (total of 6 hours)
4. Dropping ① No visible mechanical damage.
② Inductance change: within ±5%
③ Q factor change: within ±20%
Drop chip inductor 10 times on a concrete floor from a height of
100 cm.
5. Temperature coefficient +50±100ppm/℃ ① Between -40℃ and +125℃
② With a reference value of +20℃
6. Solderability 90% or more of electrode area shall be
Coated by new solder.
① Electrode of the coil shall be immersed in flux for 5 to 10
Seconds.
② The coil shall be immersed in solder bath at a temperature
of 240±5℃ , Duration for 3±0.5 seconds.
③ Solder: Sn/3.0Ag/0.5Cu
④ Flux: 25% Resin and 75% ethanol in weight.
Cu pad
Glass Epoxy Board
Solder mask
20
45 45
R10
Flexure
10 Unit: mm
Fig 1
Fig 2
Fig 3
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (8) of (12) Abracon Drawing # 600616 Revision #: M
√
6.0 Reliability Tests Conditions (Con’d)
Items Requirements Test Methods and Remarks
7. Resistance to Soldering
Heat
① No visible mechanical damage.
② Inductance change: within ±5%
③ Q factor change: within ±20%
8. Thermal Shock ① No visible mechanical damage.
② Inductance change: within ±5%
③ Q factor change: within ±20%
① Temperature, Time: (see Fig 8)
-40℃ for 30±3 min→+125℃ for 30±3min
② Transforming interval: 20s (max.)
③ Tested cycle: 100 cycles
④ The chip shall be stabilized at normal condition for 1~2
hours before measuring.
9. Resistance to Low
Temperature
① No visible mechanical damage.
② Inductance change: within ±5%
③ Q factor change: within ±20%
① Temperature: -40±2℃
② Duration: 1000+24 hours
③ The chip shall be stabilized at normal condition for 1~2
hours before measuring.
10. Resistance to High
Temperature
① No mechanical damage.
② Inductance change: within ±5%
③ Q factor change: within ±20%
① Temperature: 125±2℃
② Duration: 1000+24 hours
③ The chip shall be stabilized at normal condition for 1~2
hours before measuring.
11. Damp Heat (Steady
States)
① No mechanical damage.
② Inductance change: within ±5%
③ Q factor change: within ±20%
① Temperature: 60±2℃ , Humidity: 90% to 95% RH
② Duration: 1000+24 hours
③ The chip shall be stabilized at normal condition for 1~2
hours before measuring.
12. Loading Under Damp
Heat
① No mechanical damage.
② Inductance change: within ±5%
③ Q factor change: within ±20%
① Temperature: 60±2℃ ,Humidity: 90% to 95% RH
② Duration: 1000+24hours
③ Applied current: Rated current.
④ The chip shall be stabilized at normal condition for 1~2
hours before measuring.
13. Loading at High
Temperature (Life Test)
① No mechanical damage.
② Inductance change: within ±5%
③ Q factor change: within ±20%
① Temperature: 125±2℃
② Duration: 1000+24hours
③ Applied current: Rated current.
④ The chip shall be stabilized at normal condition for 1~2
hours before measuring.
Ambient Temperature
-40℃
+125℃ 30 min.
30 min.
30 min.
20s (max.)
Gradual Cooling
260℃
90±30sec.
20~40sec. 200℃
150℃
190℃
240℃
Max: 260℃/10sec
Fig 8
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (9) of (12) Abracon Drawing # 600616 Revision #: M
√
6.1 Reflow Profile
1~2 ℃ /sec. Ramp
Pre-heating: 150~190℃ /90±30 sec.
Time above 240℃ : 20~40sec
Peak temperature: 260℃ Max./10sec.
Solder paste: Sn/3.0Ag/0.5Cu
Max.2 times for re-flowing
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (10) of (12) Abracon Drawing # 600616 Revision #: M
√
7.0 Packing
T= tape and reel (3,000pcs/reel)
Dimension: mm
A B P K Max T Max
1.12±0.05 1.80±0.05 4.0±0.1 0.96±0.05 0.3±0.1
4.0±0.1
B 3.5
±0.1
8.0
±0.3
50
Φ1.5(+0.1/-0)
P 2.0±0.1 A
1.7
5±0.1
T
K
Sprocket Hole
Top Tape
Embossed Tape
Embossment
Chip Cavity
5.0±0.1
3.0±0.1
4.0±0.1
10±1.5
13.5
±0.2
178±2
58±2
2.45±0.2
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (11) of (12) Abracon Drawing # 600616 Revision #: M
√
8.0 Notes
i) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this
specification, please contact ABRACON for more information.
ii) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order
placement.
iii) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this
specification.
iv) When changing your production process, please notify ABRACON immediately.
v) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where
designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Life-
dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or
property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information.
vi) All specifications and Marking will be subject to change without notice.
9.0 ABRACON CORPORATION – TERMS & CONDITIONS OF SALE
PLEASE NOTE: Claims for pricing errors, shortages and defective products must be reported within 10 days from receipt of goods. Returned
products will not be accepted after 30 days from the invoice date, and may be subject to restocking fees in accordance with Abracon Corporation’s
return policy. Abracon standard product purchase orders may not be canceled within 60 days of original shipping date. Abracon non-standard
product purchase orders are non-cancelable and non-returnable. All schedule changes must be requested prior to 30 days of original shipping date.
Maximum schedule change “push-out” shall be no more than 30 days from original shipping date. Abracon reserves the right to review all schedule
and quantity changes and make pricing changes as needed. NO CREDIT WILL BE GIVEN FOR PRODUCTS RETURNED WITHOUT PRIOR
AUTHORIZATION.
Please also note that IN NO EVENT SHALL ABRACON’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES ARISING
OUT OF ANY CAUSE (INCLUDING, BUT NOT LIMITED TO, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER TORT)
EXCEED THE PURCHASE COST OF THE PRODUCTS. IN NO EVENT SHALL ABRACON BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR PUNITIVE DAMAGES.
Placing an order with ABRACON constitutes an acknowledgement that you have read and agree to the “Terms and Conditions of Sale.”
1. Prices: ABRACON (AB) reserves the right to increase the price of products by written notice to the Buyer at least thirty days prior to the date of
shipment of the products. When quantity price discounts are quoted by AB, the discounts are computed separately for each type of product to be
sold and are based upon the quantity of each type and each size ordered at any one time. If any order is reduced or cancelled by the Buyer with
AB’s consent, the prices shall be adjusted to the higher prices, if applicable, for the uncancelled quantity. Unless otherwise agreed, AB reserves the
right to ship and bill ten percent more or less than the exact quantity specified.
2. Taxes: Unless otherwise specified in the quotation, the prices shown do not include any taxes, import, or export duties, tariffs, or customs
charges. The Buyer agrees to pay AB the amount of any federal, state, county, municipal, or other taxes, duties, tariffs, or custom charges levied by
any jurisdiction, foreign or domestic, which AB is required to pay on account of the ownership at the place of installation or during transit of the
material or equipment which is the subject of this contract, or an account of the transportation, sale, or use of the material or equipment.
3. Payment Terms: Unless otherwise stated in a separate agreement or in AB’s quotation, payment terms are thirty days net from the date of
invoice, subject to approval from AB of amount and terms of credit. AB reserves the right to require payment in advance or C.O.D. and otherwise
modified credit terms. When partial shipments are made, payments therefore shall become due in accordance with the above terms upon submission
of invoices. If, at the request of the Buyer, shipment is postponed for more than thirty days, payment will become due thirty days after notice to the
Buyer that products are ready for shipment. These terms apply to partial as well as complete shipments on the debt at the lesser of 18% per year, or
the maximum then permitted by California law, from the due date until the Buyer pays the debt in full.
AISC-0603 series
CERAMIC WIRE WOUND
INDUCTORS
Date of Issue: June 14th
, 2013 1.80 x 1.12 x 1.02mm Application
Safety Non-safety
Page (12) of (12) Abracon Drawing # 600616 Revision #: M
√
4. Shipment: All shipments will be made F.O.B. AB’s shipping point. In the absence of specific instructions, AB will select the carrier. Title to the
material shall pass to the Buyer upon delivery thereof by AB to the carrier or delivery service. Thereupon the Buyer shall be responsible therefore.
Products held for the Buyer, or stored for the Buyer, shall be at the risk and expense of the Buyer. Claims against AB for shortages must be made in
writing within ten days after the arrival of the shipment. AB is not required to notify the Buyer of the shipment.
5. Delivery: Shipping dates are approximate.
6. Packing: Unless otherwise specified, prices quoted herein include normal AB packaging. If special packaging is required by the Buyer, an
additional charge will be made.
7. Inspection: Unless the Buyer notifies AB in writing within ten days from the date of receipt of any products that says the products are rejected,
they will be deemed to have been accepted by the Buyer. In order for the notice of rejection to be effective, it must also specify the reasons why the
products are being rejected. Any rejected products must be returned to AB within thirty days of rejection or the rejection shall be void and of no
effect. Notwithstanding the preceding sentence, no returned goods will be accepted for credit unless written permission is first obtained from AB.
8. Limitation of Liability: AB shall not be liable for any loss, damage, cost of repairs, or incidental or consequential damages of any kind whether
or not based upon express or implied warranty, negligence, or strict liability arising out of or in connection with the design, manufacture, sale, use,
repair, or delivery of the product, or the engineering designs supplied to the Buyer. Without limiting the generality of the foregoing: if conditions
arise which prevent compliance with delivery schedules, AB shall not be liable for any damage or penalty for delay in delivery, or for failure to give
notice of delay, and such delay shall not constitute grounds for cancellation or price adjustment: in addition, AB shall not be liable for delay in
delivery without regard to the cause of the delay, and delivery dates shall be deemed extended for a period equal to such delay.
9. Fair Labor Standards Act: AB certifies that products furnished hereunder have been or will be produced in compliance with the Fair Labor
Standards Act, as amended and regulations and orders of the U.S. Department of Labor issued thereunder, AB agrees that this statement may be
considered as the written assurance contemplated by the October 26, 1949 amendment to said Act.
10. Modifications: Unless otherwise provided, AB reserves the right to modify the specifications of products ordered by the Buyer providing that
the modifications do not materially affect the performance.
11. Termination: In the event of the complete or partial termination or cancellation of this order for the convenience of the Government, settlement
shall be made by negotiations in accordance with the Termination Clause for Subcontractors set forth in Armed Services Procurement Regulation 8-
706. If the Buyer attempts to terminate or cancel this order, entirely or partially, other than for the convenience of the Government, it shall
constitute a material breach of contract unless consent to said termination is obtained by the Buyer from AB in writing. In any event, the prices of
all items delivered, and all items which have been furnished but not yet delivered, will be adjusted upward to the applicable price for the lesser
quantities thereby purchased. AB may terminate or cancel this order in whole or in part at any time prior to the completion of performance by
written notice to the Buyer without incurring any liability to the Buyer for breach of contract or otherwise.
12. Indemnity and Waiver of Subrogation: Buyer agrees to indemnify and hold AB harmless from any cost, liability or expense, including
attorney’s fees, which arises from or relates to any third party claim for personal injury (or death), property damages, or other loss allegedly based
upon defective design, material, or workmanship of any product sold or furnished by AB, or allegedly based on any breach by AB of any of its
contractual or other obligations. The Buyer represents that any liability insurance policies which the Buyer may have shall provide that subrogation
rights against supplies such as AB are waived.
13. Governing Law: The terms of this agreement and all rights and obligations under it shall be governed by the laws of the State of California.
14. Errors: AB reserves the right to correct clerical or stenographic errors or omissions.
15. Entire Contract: The provisions of the Agreement and any accompanying documents constitute all the terms and conditions agreed upon by the
parties and replace and supersede any inconsistent provisions on the face and the reverse side of the Purchase Order, Invoice, and Packing Slip. No
modifications of this Agreement shall be valid unless in writing and duly signed by a person authorized by AB. The provisions of this Agreement
shall not be modified by any usage of trade, or any course of prior dealing or acquiescence in the course of performance.
16. Disputes: Disputes between AB and the Buyer shall be resolved in accordance with the laws of the State of California without resort to said
state’s Conflict of Law rules. Pending final resolution of a dispute, AB shall proceed diligently with the performance of an order in accordance with
AB’s decision. In any legal action, arbitration, or other proceeding brought to enforce or interpret the terms of this agreement, the prevailing party
shall be entitled to reasonably attorneys' fees and any other costs incurred in that proceeding in addition to any other relief to which it is entitled.