SOP 09. FECPAK Markup v1.1 - starworms...Microsoft Word - SOP 09. FECPAK Markup_v1.1.docx Created...
Transcript of SOP 09. FECPAK Markup v1.1 - starworms...Microsoft Word - SOP 09. FECPAK Markup_v1.1.docx Created...
-
SOP 09
v1.1
Authors: Piet Cools & Johnny Vlaminck
Approved by: Bruno Levecke
SOP 09: FECPAKG2 mark-‐up
1. Purpose
This SOP describes the procedures for the mark-‐up of images obtained through the FECPAKG2
system (SOP 08). We will record the time for mark-‐up for each sample separately.
2. Equipment
• Computer with FECPAKG2 software • Internet connection
3. Forms
RF 08 FECPAKG2 examination
-
SOP 09
v1.1
2/8
4. Procedures
1. Start a timer.
2. Open FECPAKG2 Lab Software on the desktop by clicking on the icon. The login window opens.
Note: Mark-‐up of images can only be performed using the FECPAKG2 Lab software, NOT using the FECPAKG2 Lab Lite software (used to submit samples and to acquire images).
3. In the login window, fill in your login name in the first field and your password in the second field.
4. The Main Menu opens and three tabs are visible in the top left corner: Test Submission, Scan and Markup. Click on the Markup tab.
-
SOP 09
v1.1
3/8
5. A window opens. In the ‘Notices’ field, you will see how many images need to be marked-‐up. In the example below, 3 samples are ready for mark-‐up.
6. Click on the ‘Open Markup’ button.
7. Select the appropriate submission, the ‘Sample Markup’ window opens showing the TWO images of the selected subject.
You can zoom in or out using the top slider. You can move the image using the left (vertical movement) and bottom (horizontal movement) sliders, or alternatively, using the left mouse bottom: click, hold in and move.
Changing the appearance of the image can be done by changing the brightness, contrast, saturation and gamma sliders on the right hand side of the screen.
-
SOP 09
v1.1
4/8
By thicking the ‘Show Grid Lines’ box, grid lines will appear. This might be handy in navigating or to get an idea on the scale of the image. By clicking on the button depicted on the image below (right), an example of an Ascaris, Trichuris & hookworm egg is shown, with grids of the same scale as the grids that can be displayed in the image.
8. If the image settings (brightness, contrast, saturation and gamma) are satisfactory, you can start marking-‐up eggs. If not, adjust accordingly.
-
SOP 09
v1.1
5/8
9. Choose species from the dropdown ‘Particle Type’ in the top right corner. Screen both images systematically for the presence of eggs. Clicking on an egg will mark the egg with a colored dot.
Different species have different colored dots, as in the dropdown: Ascaris is green, hookworm is red and Trichuris is yellow. Alternatively, clicking the right mouse button when screening the image, will also give the dropdown in the image field.
Only mark-‐up eggs that are clearly identifiable as Ascaris, Trichuris or hookworm. Structures that appear as an egg, but do not have a clearly visible shape and/or color should not be identified.
In case eggs seem to be duplicates because of stacking issues, only mark one of the eggs. In the example below, two structures are seen in the red rectangle, representing one and the same egg due to stacking errors. Mark-‐up the biggest one of the two.
In case you count more than 500 eggs of ONE SPECIES on an image:
(i) you don’t need to count the second image FOR THAT SPECIES.
(ii) the mark-‐up of the other image still has to be performed for the other species.
-
SOP 09
v1.1
6/8
(iii) only the first image needs to be timed.
(iv) report the counts of the species that was only assessed on one image and the timing by multiplying by two.
(v) make the remark ‘only counted 1 image’ in the comments section of RF 08 FECPAKG2 Examination.
The total number of marked eggs for a species can be found in the dropdown next to the species names. In the example below, 3 Ascaris eggs have already been detected.
-
SOP 09
v1.1
7/8
Caution: Hookworm eggs versus Ascaris eggs without shell
Ascaris eggs without shell might sometimes be confused for Hookworm eggs. Below, the left
red dot marks an Ascaris egg with no shell and the right red dot marks a Hookworm egg.
Hookworm eggs appear with a typical brilliance and also do not have a clear lined border. The
Hookworm eggs are also most often slightly more elongated. Look at how the transition from
egg to background appears: for Ascaris, you can observe a black line that is quite sharp, in
contrast, for Hookworm, this transition appears different, there isn’t a sharp line.
-
SOP 09
v1.1
8/8
In the left half of the image below, the red rectangle shows a Hookworm egg. For comparison,
the right half of the image only shows Ascaris eggs without shell.
10. After the mark-‐up of BOTH images, each representing a well, stop the timer.
11. Complete Record Form ‘FECPAKG2 examination’ (RF 08).
12. Click on ‘Complete’ to go to the next mark-‐up and repeat steps 9 – 11.