SON481 UPB-C10 Brochure v2 EN
Transcript of SON481 UPB-C10 Brochure v2 EN
Hospitals, surgeries and other care environments are complex institutions with complex workfl ows. The security of medical data is an essential part of this process. Sony understand this issue and are pleased to introduce the UPB-C10 Printable Disc Drive and UPV-50SDR* Thermal Label Disc. Developed to meet the growing demand for a reliable, easy method of producing labelled data discs in the medical environment, the UPB-C10 Printable Disk Drive performs both data writing and label printing in a small, 5.25-inch bay-sized body.
Users do not need to manipulate two separate products (one for data writing, another for label printing) or turn discs over during the production process. This not only helps increase workfl ow effi ciency in a highly cost-effective way, it is also an essential tool to help eliminate human error, reducing the risk of medical records being assigned to the wrong patient.
* The label printing function of the UPB-C10 is available only with the UPV-50SDR.
White version
Black version
UPB-C10Printable Disc Drive
All-in-one Data Writing and Label Printing
The UPB-C10 supports both
data writing and label
printing in a single unit. It
is not necessary to have a
separate disc writer and
label printer.
Error-free Seamless Process
The process of data writing and label printing is seamlessly
controlled by a host device, preventing errors that are typical with
a manual process such as data mismatch or incorrect labelling.
Compact, 5.25-inch Bay-size Body
All of the useful functions of the UPB-C10 are packed in
small 5.25-inch bay-size unit - a size that is commonly used for
computer peripherals.
Maintenance-free Dry Process
The UPB-C10 incorporates direct thermal printing technology,
which means users don’t have to worry about replacing ink
cartridges or ribbons. This also cuts costs because users don’t
have to buy additional cartridges or ribbons. Also, since this is a
dry process, discs can be handled and delivered to the customer
immediately after printing is completed.
High-speed Printing
Labels can be printed with a remarkable print speed of
approximately 30 seconds per label.
UPB Management Software
The supplied software allows users to reliably and easily create
labelled data discs from their preferred PC or other host device.
Their application software can be linked to the UPB-C10 by writing
job fi les into a shared folder. The supplied UPB Management
Software controls both data writing via Serial ATA and label
printing via USB from a single job*3. Variable information
(such as the patient name and the date of disc creation) can be
specifi ed in advance and automatically printed on the disc.
UPB Management Software consists of the following
software modules:
• UPB Service Service for job fi le interpretation and
UPB-C10 control
• UPB Monitor Job queue to monitor and control jobs
• UPB Layout Application to create template data for
label printing
• UPB Software Application for easy disc creation
*3 The supplied printer driver must be installed for printing.
Tom Black
Personal Data2016.10.10
+
Label PrintingData Writing
Windows Application
Monitoring
Shared Folder
JOB JOB
Host System UPB-C10
UPB Management
Software (UPB Service)
Printer
Disc Drive
Local Power Supply
USB
SATA (Data)
SATA (Power)
Key features
System diagram
Distributed by©2011 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.Features and specifications are subject to change without notice.
“SONY”, and “make.believe” are trademarks of Sony Corporation.All other trademarks are the property of their respective owners.
The UPB-C100 is produced at Sony EMCS Corporation Tokai Tec, which has received ISO14001 Environmental Management System certification.
This product includes the software designed for use with an MS Windows® operating system (OS). U.S. export control regulations may require an export license for export/
re-export of the Windows OS (for details, contact Microsoft Corporation).
Printer*
Printing method Direct thermal printing
Resolution 300.6 dpi
Gradations Monochrome two-level (1-bit, grey levels via dithering/rasterizing)
Size of printable areas (W x H) **
54 × 25 mm (2 1/4 × 1 inches) (2 each),
25 × 44 mm (1 × 1 3/4 inches) (2 each)
Printing speed Approx. 30 seconds
Disk drive
Read/Write speed (Max)
Interface
Printer Full-Speed USB
Disk drive Serial ATA
General
Power requirements 12 V DC, 5 V DC (supplied by SATA power)
Input current 3A (12V), 2A (5V), Stand-by: 0.5A (5V)
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Operating humidity 20% to 80% (non-condensing)
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20% to 80% (non-condensing)
Dimensions (W x H x D)
Approx. 148 × 42 × 198 mm(approx. 5 7/8 × 1 11/16 × 7 7/8 inches) excl. projecting parts
Mass Approx. 1.2 kg (2 lb 10 oz)
Supplied accessorie
Installation Manual , CD-ROM (Printer driver, UPB management software, Instructions for Use)
Media Type Write Read
DVD-ROM – 8×
DVD-ROM DL – 8×
DVD-R 8× 8×
DVD-R DL 6× 8×
DVD-RW 6× 8×
DVD+R 8× 8×
DVD+R DL 4× 8×
DVD+RW 8× 8×
DVD-RAM 5× 5×
CD-ROM – 24×
CD-R 24× 24×
CD-RW 24× 24×
UPB-C10 Specifi cations
Compliances
Safety standards (US/CA) UL60950-1, CSA C22.2 No.60950-1
(EU) EN60950-1
(CB) IEC60950-1
EMC standards (CA) ICES-003 Class B Digital Apparatus
(EU) EN 55022 (Class B), EN 55024
(AU) EN55022 Class B
(KR) KN22, KN24
(JP) VCCI Class B
Laser standards DHHS 21 CFR J (Class 1 Laser Product)
IEC/EN 60825-1 (Class 1 Laser Product)
* For the purpose of thermal head protection, the unit cannot print on discs other than dedicated UPV-50SDR DVD-R discs.
** The unit can print on the following areas of a disc.
Systems requirements
To use the UPB management software, one of the following operating systems and software modules need to be installed
Windows XP (32-bit) SP3, or later + Windows Feature Pack for Storage*
Windows XP (64-bit) SP2, or later + IMAPIv2 (Image Mastering API v2.0)* + Windows Feature Pack for Storage*
Windows Vista (32-bit, 64-bit) SP2, or later
Windows 7 (32-bit, 64-bit)
* Downloadable from Microsoft website
Printable area Dimensions (Disc tray location)
Optional accessories
UPV-50SDRThermal Label DiscContents: 50 DiscsDisc type: DVD-R
54 (2 1/4)
54 (2 1/4)
5 (7/32)
5 (7/32)
5 (7/32)
5 (7/32)
5 (7
/32)
5 (7
/32)
5 (7
/32)
5 (7
/32)
25(1)
25 (1
)25
(1)
25(1)
44 (1
3/4
)
44 (1
3/4
)
Unit: mm (inches)
132 (5 1/4)
148 (5 7/8)
6.3 (1/4)9.7
(13/32)
41.5
(1 1
1/16
)
17.3
(1
1/16
)2.
6 (1
/8)