Solutions for: Tire Manufacturing - · PDF fileValves and Pumps • Molded and Extruded...

Solutions for:

Tire Manufacturing

WhyLewis-Goetz?

2

1978

SOME OF THE

WORLD’S LARGESTHAVE BEEN TRUSTING

LEWIS-GOETZ WITH THEIR BUSINESS SINCE

TIRE MANUFACTURERS

THIS CONFIDENCE IS BASED ON OUR

BEING ABLE TO TROUBLESHOOT

THEIR PROBLEMS THROUGH:

LONG-TIME TENURED PRODUCT SPECIALISTS*

ON-SITE SURVEYS TO

TROUBLESHOOT AND TO EVALUATE PROCESSES

ASSESSING THE PRODUCTS

PROVIDING

24/7

RESPONSIVENESS

24/7

MAKING RECOMMENDATIONS THAT ARE DESIGNED TO:

REDUCE

THE TOTAL

COST OF OWNERSHIP

INCREASE UPTIME, PRODUCTIVITY AND

PREVENTEMERGENCIES

OFFER AN

INNOVATIVEMARKET

ADVANTAGE

01

02

04

IN USEAND THEIR APPLICATIONS

SERVICE AND TECHNICAL

TO ALL OF THEIRNEEDS

03

*We have an average sales staff tenure of nine years.

3

We Are Active Members of Top Accredited Associations

WE ARE ALSO RANKED AS A MARKET LEADER IN MODERN DISTRIBUTION MANAGEMENT:

WE WORK SAFELY: OUR SERVICE CREWS ARE CERTIFIED TO MSHA PARTS 46 AND 48B; OSHA 10 AND 30 WHERE APPROPRIATE

AND LOCAL PRESENCE OF NEARLY

100

24/7

OUR PROCESS ALLOWS US TO DOCUMENT THE SAVINGS THAT WE BRING TO OUR CUSTOMERS

$5.6MILLION DOLLARS

AND IN THE LAST EIGHT YEARS,

WE’VE DOCUMENTED AND SAVED ONE

OF OUR TIRE MANUFACTURER CUSTOMERS OVER

OUR NORTH AMERICAN GEOGRAPHIC FOOTPRINT

NORTH AMERICAN

LOCATIONS ENABLE US TO PROVIDE IMMEDIATE ON-SITE DIAGNOSTIC AND PREVENTATIVE SERVICE, LOCAL EMERGENCY RESPONSE AND FASTER DELIVERY TIMES.

20+ locations provide belt and field services including installation, maintenance and technical services 24/7.

4

Balance UnitBalance Unit

Visual Inspection

Vulcanization

Tire Building

Calender

Tire Cord Cutting Unit(specific angles)

The Parts You Need for a Smooth Manufacturing Process

Weighing of Raw Materials

Kneader/Mixer

Dip TankDryer Section

Wig-Wag Unit

Cooling Line

Metal Detector

Extruder

Checkweigher Unit

Cutting Device

1 Rubber Mixing4 Calendering - Tire Cord Cutting


Kneader/Mixer


Wig-Wag Unit

Cooling Line

Metal Detector

Extruder

Checkweigher Unit

Cutting Device

Banbury Mixing ProductsCharging Belts • Scale BeltsOverhead Loaders • Mill to Mill BeltsWig Wags • Slurry Dip BeltsTransfer-Takeaway Belts • Hugger BeltsMix to Mix Belts • Transfer ConveyorsPlastic Modular Belts • 1-inch and 2-inch Pitch Belts

1


Component Prep ProductsCooling Tank Conveyors Plastic Modular Belt1-inch and 2-inch Pitch Belts Live Roller Drive BeltsIncline and Decline Belts Overhead LoadersSkiver Belts Spool Windup Belts • Scale BeltsTakeaway Belts • Mill to Mill Belts Cooling Tank Belts • Cementer BeltsExtruder Takeaway BeltsOverhead Mill Cooling Belts • Booking BeltsExtruder Takeaway Belts • Takeaway BeltsRotary Unions • Live Rollers

Products Used Across All Areas of the PlantMotorized Pulleys • Fasteners • Air Multipurpose HoseHydraulic Hose • Pneumatic Tubing ConnectionsCompressed NA General Service Sheet GasketMetal Gaskets • Braided PackingMechanical Seals • Joint Sealing • Safety SuppliesValves and Pumps • Molded and Extruded Parts

3 Rubber Extrusion & Cooling

Component Prep ProductsCooling Tank Conveyors • Plastic Modular Belt1-inch and 2-inch Pitch Belts • Live Roller Drive Belts • Incline and Decline Belts Overhead Loaders • Skiver BeltsSpool Windup Belts • Scale BeltsTakeaway Belts • Mill to Mill Belts Cooling Tank Belts • Cementer BeltsExtruder Takeaway BeltsOverhead Mill Cooling Belts • Booking BeltsExtruder Takeaway Belts • Takeaway BeltsRotary Unions • Live Rollers

6 Final Finish / InspectionFinal Finish ProductsAccumulating Conveyors • Sorting ConveyorsInspection Conveyors • Plastic Modular Belts1-inch and 2-inch Pitch Belts • Transfer BeltsLive Roller Drive Belts • Sort and Label BeltsInspection Belts • Trimmer Belts

Tire Building Products:Innerliner and Green Tire Takeaway BeltsInnerliner Applier BeltsFischer Shear Feed and Cutting BeltsCuring Products:Accumulating ConveyorsSorting ConveyorsIncline from Curing Press TakeawaysOverhead Inclines • Incline Kicker BeltsAll Steep Inclines • Curing Press TakeawaysCuring Press Takeaway Trench BeltsPlastic Modular Belts2-inch Pitch BeltsPTFE Lined – Smooth and Corrugated Rubber Cover and Stainless Steel Braided HoseLive Rollers

Cutting Products:Bias Cutter BeltsFischer Festoon BeltsSlitter Belts • Transfer BeltsSpadone Splice & Windup BeltsCrossover Belts

5 Tire Building & Vulcanization (Curing) Unit

2 Batch-off

Balance UnitBalance Unit

Visual Inspection

Vulcanization

Tire Building

Calender

Tire Cord Cutting Unit(specific angles)

The Parts You Need for a Smooth Manufacturing Process


Kneader/Mixer


Wig-Wag Unit

Cooling Line

Metal Detector

Extruder

Checkweigher Unit

Cutting Device

1 Rubber Mixing4 Calendering - Tire Cord Cutting


Kneader/Mixer


Wig-Wag Unit

Cooling Line

Metal Detector

Extruder

Checkweigher Unit

Cutting Device


1


Component Prep ProductsCooling Tank Conveyors Plastic Modular Belt1-inch and 2-inch Pitch Belts Live Roller Drive BeltsIncline and Decline Belts Overhead LoadersSkiver Belts Spool Windup Belts • Scale BeltsTakeaway Belts • Mill to Mill Belts Cooling Tank Belts • Cementer BeltsExtruder Takeaway BeltsOverhead Mill Cooling Belts • Booking BeltsExtruder Takeaway Belts • Takeaway BeltsRotary Unions • Live Rollers

Products Used Across All Areas of the PlantMotorized Pulleys • Fasteners • Air Multipurpose HoseHydraulic Hose • Pneumatic Tubing ConnectionsCompressed NA General Service Sheet GasketMetal Gaskets • Braided PackingMechanical Seals • Joint Sealing • Safety SuppliesValves and Pumps • Molded and Extruded Parts

3 Rubber Extrusion & Cooling

Component Prep ProductsCooling Tank Conveyors • Plastic Modular Belt1-inch and 2-inch Pitch Belts • Live Roller Drive Belts • Incline and Decline Belts Overhead Loaders • Skiver BeltsSpool Windup Belts • Scale BeltsTakeaway Belts • Mill to Mill Belts Cooling Tank Belts • Cementer BeltsExtruder Takeaway BeltsOverhead Mill Cooling Belts • Booking BeltsExtruder Takeaway Belts • Takeaway BeltsRotary Unions • Live Rollers

6 Final Finish / InspectionFinal Finish ProductsAccumulating Conveyors • Sorting ConveyorsInspection Conveyors • Plastic Modular Belts1-inch and 2-inch Pitch Belts • Transfer BeltsLive Roller Drive Belts • Sort and Label BeltsInspection Belts • Trimmer Belts

Tire Building Products:Innerliner and Green Tire Takeaway BeltsInnerliner Applier BeltsFischer Shear Feed and Cutting BeltsCuring Products:Accumulating ConveyorsSorting ConveyorsIncline from Curing Press TakeawaysOverhead Inclines • Incline Kicker BeltsAll Steep Inclines • Curing Press TakeawaysCuring Press Takeaway Trench BeltsPlastic Modular Belts2-inch Pitch BeltsPTFE Lined – Smooth and Corrugated Rubber Cover and Stainless Steel Braided HoseLive Rollers

Cutting Products:Bias Cutter BeltsFischer Festoon BeltsSlitter Belts • Transfer BeltsSpadone Splice & Windup BeltsCrossover Belts

5 Tire Building & Vulcanization (Curing) Unit

2 Batch-off

5

Valve Products

Product Description Rubber Mixing

Banbury Department Component Prep Curing Department Final Finish

Batch-Off Rubber Extrusion & Cooling Tire Cord Cutting Tire Building & Vulcanization Final Finish/Inspection

Lightweight Conveyor Belt

PVC 150

Blue Stripe Polypreme

New Era Blue

Blue Slip Top

Tyler Wire Silicone

Modular Conveyor Belt

Thermoplastic Polyuerethane Timing Belts

Elastomer Thermoplastic Monofilament Belting

Conveyor Belt Accessories

Hose Products

Gasket Products

Metal gaskets

Braided Packing

Mechanical seals

Joint sealing

Multipurpose, air, water and steam hose

Hydraulic hose

Pneumatic tubing connections

Compressed NA General Service Sheet

PTFE lined - smooth and corrugated rubber cover and stainless steel braid

Motorized pulleys, mechanical fasteners, live rollers, twisted o-rings, lacing and feed augers

Screw conveyors

Vytaflex 120 Wedgegrip

Roller Top 90 degrees

Raised Rib

Flush Grid

Flat Top

GripTop

Metal Hose

6

Lewis-Goetz Offers These Key Products to the Tire Industry

Documented Cost Savings

Plus Preventative Maintenance Conveyor Belt Services

Our service portfolio is designed to reduce our customers’ total cost of ownership.

7

Surveys and Inspections

Fabrication Capabilites

Total Conveyor Inspections and Regular Maintenance

On-Site Conveyor Belt Splicing

Conveyor System Installation Mechanical and Vulcanization

On-Site Conveyor System Consulting

Services

Customer Product Training

Conveyor Belt Troubleshooting and Repair

Conventional to Modular System

Conversions

Documented Cost Savings

Blue Striped Polyester Polypreme Hot Stock and Water Belts

Description Cover SurfaceBottom Surface

Working Tension

Plies WeightMin Pulley Diameter

Blue Stripe Polypreme Hot stock and Water

100% Polyester Friction150 LBS PIW225 LBS PIW

23

.61 #/SF1.02#/SF

3 IN4 IN

Lightweight Belt

8

2 PLY 150

The 2 (two) ply version is made up of two seventy-five pound plies of white polyester with an overall tension rating of 150 pounds per inch width, (PIW). It has a one eight inch of bright blue stripe every eight inches across the width for identification purposes. This 2 (two) ply belt can be used to replace current 3 ply cotton hot stock and water belt that has an overall all tension rating of 135 pounds per inch width, (PIW). Both belts have a thickness of 1/8”.

3 PLY 225

The 3 (three) ply version is made up of 3 seventy-five pound plies of white polyester with an overall tension rating of 225 pound per inch width, (PIW). It also has a one eight inch of bright blue stripe every eight inches across the width for identification purposes. This 3 (three) ply belt can be used to replace current 4 (four) ply cotton hot stock and water belt that has an overall tension rating of 180 pounds per inch width (PIW). Both belts have a thickness of 3/16”.

The special blue stripped polyester compound with its higher tension ratings virtually eliminates stretching of conveyor belts. The blue striped polyester compound is also more resistant to knife cuts that current cotton hot stock and water cover.

In a majority of applications the 2 ply Blue Striped Polyester Polypreme can be used in place of the older style 3 ply cotton belt. If a more durable belt is needed for knife applications, extruder takeaway or curing press transfer lines, we would recommend the 3 ply Blue Striped Polyester.

Feature and Benefits:

• Can be used on 80% of the conveyors in a tire plant

• Available in 2 and 3 ply constructions

• Special Blue Stripe Polyester top cover is more resistant to knife cuts

PVC Interwoven 150# Black PVC Cover One Side (COS)


• Excellent whenever an economical transfer or drive belt is needed and heat and rubber release is not a problem

• The unique weave pattern allows the belt to be more flexible around pulleys

• Superior tracking, straightness, and flatness characteristics

• Exceptional fastener retention, good tear and general abuse resistance

Specifications:


Working Tension


150# Black Inter-woven PVC COS

Black PVC Bare 150 LBS PIW 1 1.1 LBS/SF 4 IN

• 100% Polyester construction eliminates excessive stretch, shrinkage and fastener pullout

• Excellent for non-marking applications

New Era Blue


• Excellent belt wherever sticky rubber buildup is a problem and release of rubber stock is needed

• Rough blue texture manufactured exclusively for Lewis-Goetz

• Special heat curing process prevents contamination in the tire manufacturing process

• Greater life, better quality and less expensive than traditional products

Specifications:


Working Tension

Plies TEMP RatingMin Pulley Diameter

New Era Blue SWG II Release Silicone Belt

Abraded Blue Silicone

Friction 135 LBS PIW 3 400 DEG F 3 IN

Lightweight Belt

9

Blue Slip Top


• 10 mm thick solid Teflon sheet allows tires exiting the press to slide onto the center of the belt

• Eliminates the need for costly modular roller top belting

• Polyester/Fleece pulley surface good for both slider belts and rollers

• Excellent tracking capabilities

• Seamless maximum width = 34”

Specifications:


Working Tension

OAGMin Pulley Diameter

Blue Slip Top

10 mm solid sheet Teflon Ultra Glossy

PTFE

Buffed non-woven PES

110 LBS PIW .115 6 IN

Tyler Wire Silicone Release Belt


• Superior release belt that can be used wherever release of hot sticky rubber is a problem

• Minimizes surface contact for better release

• Special calendared Silicone provides a more durable top surface

• Gum rubber plies allow excellent flexibility for smaller pulley diameters

Specifications:


Working Tension

Plies TEMP RatingMin Pulley Diameter

Tyler Wire SiliconeFabric

Impression silicone

Friction 90 LBS/IN 3 77 LBS/SF ½ IN

Vytaflex® 120 Black Wedgegrip


• Excellent when slippage is a problem due to steep inclines

• “Siped Diamond Design” can prevent slippage up to a 45 degree incline

• Tough abrasion resistant rubber will not harden and lose resiliency

Specifications:


Working Tension


Vytaflex 120 Black Wedgegrip

Diamond Friction 120 LBS PIW 2 1.04#/SF 4 IN

10

Lightweight Belt

Elastomer Thermoplastic Monofilament Belting

Cover coatings are mainly made of thermoplastic materials like TPU, TPO, PVC, etc.,and elastomer-like rubbers, PUR, etc. – or feature a fabric cover. The running side is usually a fabric, often impregnated with a thermoplastic material, or with special wear-resistant PUR that provides a low and constant coefficient of friction. There are also pulley-side fabrics that feature special low-noise running capabilities.

Lewis-Goetz offers a multitude of these belts to fit each specific application in a tire plant.

LinersLewis-Goetz Tread Liner XLPMFAS

A multitude of special monofilament yarns are fabricated together to provide cross rigidity throughout the product which provides extra support for each layer of tread stock. Its textured surface also provides excellent release of the rubber stock. Lewis-Goetz can fabricate to any dimension and attach Velcro trailing ends for ease of installation during the production process.

Lewis-Goetz Sidewall Liner HDPEPPPVA

Available in High Density Polyethylene, Polypropylene, and Poly Vinyl Alcohol these products offer excellent crease resistance, non-fraying edges, low elongation, and good release of the sidewall stock. Different thicknesses and tensile strengths provide the right product for your specific application. Available in a multitude of colors for stock color coding throughout the plant.

11

LinersMaterial Polyethylene Polypropylene

Thickness 0.40mm / 0.15-.016” 0.45mm / 0.17-0.18”

Weight 140 g/m2 210 g/m2

Breaking StrengthWarp 100 Kgf/5 cm Weft 90 Kgf/5 cm

Warp 150 Kgf/5 cm Weft 100 Kgf/5 cm

Melting Point 125°C 165°C

Edges of Empty Roll for Calendering (550 yds=<)

Edges of Stocking Roll for Calendering(550 yds = <)

Conveyor Belt Accessories • Mechanical Fasteners

• Motorized Pulleys

• Lacing

• Live Rollers

• Twisted O-Rings

• Feed Augers

• Screw Conveyors

o Application: For conveying raw rubber pellets from storage tanks, to banbury mixers, etc.

• Shaftless Screws

o Ideal for handling sticky and sluggish bulk materials

o Improved conveying efficiency when compared to other types of conveyors

o Allows greater flexibility for plant layout due to configurations available

o Internal bearings are eliminated

Competitive Liner Our Liner

Competitive Liner Our Liner

12

Modular BeltRoller Top 90 degrees


• Designed for easy 90° transfer

• Imperial belt width

• Large robust roller with diameter 23 mm (0.9”)

• Roller distance 50 mm (2”)

• Smart-Fit rod retention

Specifications:

Belt material Polypropylene (PP) Acetal (POM)

Rod material Acetal (POM) Polyamide (PA)

Roller material Polyamide (PA)

Nominal tensile strength F1

Nstraight run

N/mlb/ft

200001370

200001370

400002740

Temperature range°C°F

5 - 9340 - 200

5 - 10540 - 220

-40 - 93-40 - 200

Belt weight mB

kg/m2

lb/sqft13.52.76

13.52.76

18.53.79

• Rod diameter 7 mm (0.27”)

• Closed hinge

• Indent 50 mm (2”)

• Lug teeth sprockets

Diameter of idling rollers (minimum)

Diameter of support rollers (minimum)

Diameter for gravity take-up and center drive rollers

(minimum)

Backbending radius for elevators without side guards or hold down devices (minimum)

mm inch mm inch mm inch mm inch

90 4 100 4 150 6 150 6

mm (nom.) 152 203 254 305 356 406 457 508 559 610 660 711 762 etc.

inch (nom.) 6 8 10 12 14 16 18 20 22 24 26 28 30 etc.

Standard range of belt widths b0

Real belt widths are in most cases 0.1% to 0.3% smaller.

For Polypropylene (PP) material up to 750 mm (30”) -3 mm to 0 mm and -0.4% to 0% for wider belts.

For Acetal (POM) material up to 750 mm (30”) -3 mm to 0 mm and -0.4% to 0% for wider belts.

Standard belt widths in increments of 2.0” (50.8 mm). Cut width: Standard belt width - 0.5” (- 12.7 mm).

The nominal tensile strength is valid for 23 °C (73 °F). The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 20% of the nominal tensile strength. For detailed information and correct calculation of effective tensile force contact your local Lewis-Goetz representative.

13

mm (nom.) 229 305 381 457 533 610 686 762 838 914 991 1067 1143 etc.

inch (nom.) 9 12 15 18 21 24 27 30 33 36 39 42 45 etc.

Modular BeltRaised Rib


• Imperial belt width

• 36% open area; 67% open contact area, largest opening 17.5x3.55 mm (0.69”x0.14”)

• Easy to clean

• Straight ribs 2.8 mm thick

Available accessories

• Combs (finger transfer plates) long and short

Specifications:

Belt materialHot Water Resistant

Polypropylene (PP + HW)Submersible Polypropylene

(PP + GH)

Rod material Polypropylene (PP)


N straight run

N/mlb/ft

320002192

200001370


5 - 10540 - 220

5 - 10540 - 220

Belt weight mB

kg/m2

lb/sqft9.9

2.0313.62.79


• Smart fit rod retention

• Strong edges

• Lug teeth sprockets

• Food approved materials available



Diameter for gravity take-up and center drive rollers

(minimum)

Backbending radius for elevators without side guards or hold down devices (minimum)

mm inch mm inch mm inch mm inch

90 3.5 100 4 150 6 150 6


Hot Water Resistant Polypropylene (PP + HW): Real belt widths are in most cases 0.1% to 0.3% smaller.

Submersible Polypropylene (PP + GH): Real belt widths are 0.25% wider.

Standard belt widths in increments of 76.2 mm (3”). Non-standard widths are offered in increments of 38.1mm (1.5”).


14

Modular BeltFlush Grid


• 37% open area; 55% open contact area; largest opening 6.0x8.5 mm (0.24”x0.33”)

• Excellent for cooling and draining

• Open hinge

• Easy to clean



Specifications:

Belt materialPolypropylene

(PP)Polyethylene

(PE)Acetal (POM)

Rod materialPolypropylene

(PP)Polyethylene

(PE)Polypropylene

(PP)Polyamide

(PA)


Nstraight run

N/mlb/ft

260001781

180001233

300002055

350002397


5 - 10540 - 220

-70 - 65-94 - 150

5 - 9340 - 200

-40 - 93-40 - 200

Belt weight mB

kg/m2

lb/sqft6.8

1.397.2

1.4810.22.09

10.22.09


• Flights and scoops

• Side guards

• Hold-down devices

• GripTop modules



Diameter for gravity take-up and center

drive rollers (minimum)

Backbending radius for elevators without side guards or hold

down devices (minimum)

Backbending radius for elevators with side guards or hold down devices (minimum)

mm inch mm inch mm inch mm inch mm inch

90 4 100 4 150 6 150 6 250 10



For Polyethylene (PE) material up to 750 mm (30”) -3 mm to 0 mm and -0.4% to 0% for wider belts.

For Polypropylene (PP) material up to 750 mm (30”) -3 mm to 0 mm and -0.4% to 0% for wider belts.

For Acetal (POM) material up to 750 mm (30”) -3 mm to 0 mm and -0.4% to 0% for wider belts.

Standard belt widths in increments of 75 mm (3”). Non-standard widths are offered in increments of 18.75 mm (0.74”). Smallest possible width 112.5 mm (4.42”).


Use the largest possible backbending radius for elevators with side guards or hold down devices.

mm (nom.) 225 300 375 450 525 600 675 750 825 900 975 1050 1125 1200 etc.

inch (nom.) 9 12 15 18 21 24 27 30 33 36 39 42 45 48 etc.

15

mm (nom.) 50 100 150 200 250 300 350 400 450 500 550 600 650 700 etc.

inch (nom.) 2 4 6 8 10 12 14 16 18 20 22 24 26 28 etc.

Modular BeltFlat Top


• 0% open area

• High lateral stiffness



• “Open window” sprockets

Specifications:


• Flights and Scoops

• Side guards


• GripTop modules


Real belt widths are in most cases 0.1% to 0.3% wider.

For Polyethylene (PE) material up to 750 mm (30”) -3 mm to 1 mm and -0.4% to 0.1% for wider belts.

For polypropylene (PP) material up to 750 mm (30”) -1 mm to 2 mm and 0% to 0.4% for wider belts.

For Acetal (POM) material up to 750 mm (30”) -2 mm to -1 mm and -0.25% to 0.25% for wider belts.

Standard belt widths in increments of 50 mm (2”). Non-standard widths are offered in increments of 16.66 mm (0.66”). Smallest possible width 83.4 mm (3.25”). Non-bricklayed belts 50 mm (2”) and 100 mm (4”) wide.


Belt material Polypropylene (PP)Polyethylene

(PE)Acetal (POM)

Rod materialPolypropylene

(PP)Acetal (POM)

Polyethylene (PE)

Polypropylene (PP)

Polyamide (PA)


Nstraight run

N/mlb/ft

180001233

180001233

9000616

215001473

320002192


5 - 10540 - 220

5 - 9340 - 200

-70 - 65-94 - 150

5 - 9340 - 200

-40 - 93-40 - 200

Belt weight mB

kg/m2

lb/sqft5.51.13

5.51.13

5.81.19

8.41.71

8.41.71









50 2 50 2 100 4 150 6 250 10

Use the largest possible backbending radius for elevators with side guards or hold down devices.

16

Modular BeltGrip Top


• Open area dependent on percentage of GripTop modules installed, as illustrated approx. 20%


• Abrasion resistant GripTop, high friction


• “Open window” sprockets

Specifications:

Proposed pattern

• Indent 50 mm (2”)

• GripTop rows every 2nd, 4th, 6th module row (multiples of 50.8 mm (2”))


• Flights










50 2 50 2 100 4 150 6 250 10



For Polypropylene (PP) material up to 750 mm (30”) -2 mm to 1 mm and -0.4% to 0.1% for wider belts.

For Acetal (POM) material up to 750 mm (30”) -3 mm to 0 mm and -0.4% to 0.1% for wider belts.

Standard belt widths in increments of 50 mm (2”). Non-standard widths are offered in increments of 16.66 mm (0.66”), minimum indent 33.3 mm (1.5”).


mm (nom.) 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 etc.

inch (nom.) 8 12 16 20 24 28 32 36 40 43 47 51 55 59 etc.

Belt material Polypropylene (PP) Acetal (POM)

GripTop material Thermoplastic Elastomer (TPE)

Rod materialPolyamide

(PA)Acetal (POM)

Polypropylene (PP)

Thermoplastic Elastomer (TPE)

Polypropylene (PP)

Polyamide (PA)


Nstraight run

N/mlb/ft

14000959

14000959

14000959

14000959

180001233

22001507


5 - 6040 - 140

5 - 6040 - 140

5 - 6040 - 140

5 - 6040 - 140

5 - 6040 - 140

-40 - 60-40 - 140

Belt weight mB

kg/m2

lb/sqft6.51.34

6.51.34

6.51.34

6.51.34

9.31.91

9.31.91

Standard belt color grey grey white white blue blue

Mechanical Pin Splice

17


Our mechanical pin joint offers fast installation and reliable joining. This is ideal for reducing machine downtime during replacement and maintenance without sacrificing joining integrity and performance. This installation-friendly, profile-compatible joining method is suitable for most pitch sizes and conveying applications.

Unique pin splice makes belt installation simple. Precision holes through the entire belt width ensure pin placement is secure and reliable for most conveying applications. Installation is simple and fast, making the pin joint perfect for downtime reduction, hard-to-access belts, and multi-belt layouts.

Features and Benefits:

• Fast and easy installation with minimal or no tools

• Minimized downtime due to speed and ease of installation

• No exposed metal, which prevents excess pulley wear

• No loss in minimum pulley requirements

• Strong and durable joining that is suitable for most conveying applications

• Available in the most common pitches

• Excellent for belt applications with special backings including, but not limited to Linatex, NBR roughtop, 85 A urethane, PVC, Heatmate, foam, etc.

Tooth Profile (Pitch) Width

H 1.00” to 6.00”

T10 25 to 150 mm

AT10 25 to 150 mm

AT20 25 to 100 mm

8M 25 to 150 mm

14M 25 to 55 mm

*Not available for drive belts.


Open-ended and truly endless timing belts are utilized in numerous industries, including the tire industry. They are the perfect choice for situations in which traditional belt designs will not provide ideal synchronization. Synchronization is achieved by meshing the belt teeth into a similar-pitch pulley. Belts are available in metric and imperial pitches. Joining of the belts can be achieved with finger punch joining, mechanical clamps, or the patent-pending Hinge-Joint.

18

Hose ProductsMedium Pressure Smooth Bore Hose of PTFE SB Series

Features & Benefits:

• High working and burst pressures

• Most economic of all hoses lined with PTFE

• The low-friction surface of smooth bore hose provides for high flow rates

• Easily drained and/or cleaned

• Temperature Rating: -65° F (-54° C) to +450° F (+230° C)

Part Number Nominal ID Acutal SizeMaximum Working Pressure

Minimum Burst Pressure

Minumum Bend Radius

Aproximate Weight/Ft.

White Black ID OD

S-3 S-3 Blk 3/16” .125” .23” 3000 PSI 12000 PSI 2.0” .050 lbs

S-4 S-4 Blk 1/4” .19” .30” 3000 PSI 12000 PSI 2.0” .060 lbs

S-5 S-5 Blk 5/16” .25” .37” 3000 PSI 12000 PSI 2.3” 0.70 lbs

S-5ZH 5/16” .24” .45” 4350 PSI 17400 PSI 2.5” .100 lbs.

S-6 S-6 Blk 3/8” .32” .40” 2500 PSI 10000 PSI 3.9” .090 lbs

S-7* 3/8” .37” .50” 2250 PSI 9000 PSI 4.5” .105 lbs

S-8 S-8 Blk 1/2” .41” .52” 2000 PSI 8000 PSI 4.7” .115 lbs

S-10 S-10 Blk 5/8” .50” .59” 1750 PSI 7000 PSI 5.3” .150 lbs

S-12 S-12 Blk 3/4” .62” .80” 1500 PSI 6000 PSI 6.5” .225 lbs

S-14* 3/4” .77” .89” 1100 PSI 4400 PSI 7.4” .225 lbs

S-16 S-16 Blk 1” .87” 1.05” 1000 PSI 4000 PSI 7.8” .285 lbs

S-16Z s-16Z Blk 1” .87” 1.03” 1250 PSI 5000 PSI 9.0” .475 lbs

S-18* 1” 1.00” 1.18” 900 PSI 3600 PSI 9.8” .335 lbs

S-20Z S-20Z Blk 1 1/4” 1.13” 1.38” 1000 PSI 4000 PSI 11.0” .585 lbs

* Available only with thin wall tubing.

19

Hose ProductsConvoluted Hose with Multiple Layers of PTFE

Features & Benefits:

• Very flexible, requiring very little force to deflect

• Tightest or smallest bend radius

• High working pressure

• Light weight per foot

• Full vacuum rating available

• Temperature Rating: -65° F (-54° C) to +400° F (+230° C)

Part Number Nominal IDOperating Pressure

Burst Pressure

Bend RadiusAproximate Weight/Ft.

White Black I.D. O.D.

WCV-08 BCV-08 0.50 0.76 1250 5000 1.50 0.20

WCV-10 BCV-10 0.62 0.91 1400 5600 2.00 0.38

WCV-12 BCV-12 0.75 1.07 1100 4400 2.50 0.33

WCV-16 BCV-16 1.00 1.34 1000 4000 3.00 0.43

WCV-20 BCV-20 1.25 1.57 1000 4000 3.50 0.53

WCV-24 BCV-24 1.50 1.81 750 3000 4.50 0.65

WCv-32 BCV-32 2.00 2.32 500 2000 5.25 0.73

All pressures are calculating at 70F; for higher temperatures check de-rating chart.For any applications requiring vacuum conditions please consult factory.

Steam Hose

Goodall “Super Inferno” Steam Hose

Tube: Chlorbutyl Resistant to Blisters & “Popcorning” Reinforcement: High Tensile Steel Wire Braids Coated to Resist Corrosion & Enhance Adhesion Cover: Red EPDM Resistant to Heat, Abrasion & Weathering; Black Lazy Mylar Spiral for Ease of Identification Suggested Fittings: Crimped Male & Female or Bolt On Clamps with Male & Female, “Boss Style” Fittings Temperature Ranges: -40°F to 450°F (-20°C to 232°C) Working Pressure: 250 psi, 20 to 1 Safety Factor Applications: Transfer of steam and/or hot water in virtually any application.

I.D. O.D.Maximum Working Pressure

Minimum Burst Pressure

MinimumBend Radius

Weight Standard Length

Nominal Bore mm

in. mm in. bar psi bar psi mm in. kg/m lb./ft. mm ft.

19.05 0.75 32.26 1.27 17.24 250 344.74 5000 101.60 4 0.92 0.62 76.20 250

25.40 1 39.37 1.55 17.24 250 344.74 5000 127 5 1.32 0.89 76.20 250

Goodall® DuraCrimp® Coupling System

A safe crimping connection for Goodall® steam hoses (Inferno ISO 6134-2A and Super Inferno)

Goodall® DuraCrimp® is an exclusive and innovative crimping system for the new generation of Goodall® steam hoses.

DuraCrimp® is an extremely safe and ergonomic coupling system for steam applications. This innovative solution offers the following advantages:

• Increased safety and reliability

• Cost savings

• Original and innovative ergonomics

Hose ProductsSteam Hose

20

Tube: Black, smooth NBR rubber. Extruded. RMA Class A.

Reinforcement: 4 spiral polyester yarn. High tensile strength.

Cover: Red smooth NBR/PVC rubber compound. Extruded. High quality abrasion, oil and ozone resistant. RMA Class A.

Temperature Ranges: -20°F to +180°F (-29°C to 82°C)

Applications: Premium multipurpose heavy duty hose handling air, water, oil, diesel and other petroleum based products (not recommended for unleaded gasoline). Non-conductive hose construction. Extremely flexible, kink resistant and crush proof for harsh, demanding applications.

Multi-Purpose Heavy-Duty Air Hose

I.D. O.D.Maximum

Working PressureMinimum Burst

PressureMinimum Bend

RadiusWeight

in NB in mm psi bar psi bar in mm lb/ft

1/4 DN6 0.62 15 2/3 300 20 80 1,200 1.5 38.1 0.16

3/8 DN10 0.71 18 300 20 80 1,200 2.2 57.1 0.18

1/2 DN13 0.88 22.2 300 20 80 1,200 3.0 76.2 0.25

3/4 DN19 1.15 29.2 300 20 80 1,200 4.5 114.3 0.42

1 DN25 1.43 36.3 300 20 80 1,200 7.0 177.8 0.63

1 1/4 DN32 1.75 44.5 250 17 69 1,000 8.7 222.2 0.81

1 1/2 DN38 2 50.8 250 17 69 1,000 10.5 266.7 0.95

2 DN50 2.55 64.8 250 17 69 1,000 14.0 355.6 1.23

• Identifiers with color-coded identification rings and RFID

• Superior compounds

Hydraulic Hose, Fittings & Adapters

Manufactured by the foremost hydraulic hose companies in North America, Lewis-Goetz offers a wide range of hydraulic hose and fittings to cover every field application requirement, locally from stock.

SAE100R13: 1/4 - 2 inch, Four or six spiral. Very high pressure hydraulic hose. Working pressures to 5100 psi. SAE100R2AT: 1/4 - 2 inch, Two wire braids. High pressure hydraulic hose. Working pressures to 6,500 to psi. SAE100R5: 1/4 - 2-1/2 inch, One wire braid. Working pressures to 3,000 psi. Polyester braided cover. SAE100R16: 1/4 - 2 inch, Two wire braids. High pressure hydraulic hose. Working pressures to 6,500 psi. Exceeds EN requirements at half (1/2) the bend radius. 2SN: 1/4 - 2 inch (EN 853) Two wire braids. High pressure hydraulic hose. Working pressures to 6,500 psi. SAE100R12: 1/4 - 2 inch, Four spiral. Very high pressure hydraulic hose. Working pressures to 6,500 psi. Fittings: The full range of JIC, Male Pipe, code 61 and code 62 at face anges as well as other high pressure hydraulic hose fittings.

Also Available: Stainless Steel Metal Flexible Hose – We offer a wide variety of sizes and styles fabricated to your demanding standards and applications. Contact us for more details.

21

Sealing Products

Lewis-Goetz stocks and fabricates a variety of compressed non-asbestos aramid fiber/inorganic fiber rubber bounded sheet goods in various styles, thicknesses and sizes. These products are typically used in water, oil, mild chemical and steam type applications. General Service sheet is used in temperatures as high as 700°F and pressures up to 1,200 psi.

Compressed NA General Service Sheet

Lewis-Goetz stocks and supplies a full array of metal gaskets including spiral wounds, double jacketed, ring joint, camprofile, and corrugated metal gaskets. Primarily used in high temperature (up to 1,200°F) and high pressure (up to 5,000 psi) applications, metal gaskets have become the industry’s toughest problem solvers in a host of industries.

Metal Gaskets

Synthetic Fiber

With an array of sizes and styles of synthetic yarn braid packing, Lewis-Goetz carries varieties lubricated with graphite, fluoropolymer, petrolatum and other different oils designed for your specific application. Synthetic fiber packing is used in pumps and valves for general service oil, water and chemicals. Products in this category are suitable for temperatures ranging from -32°F to 500°F, chemical service from 2-12 ph and shaft speeds up to 3,000 fpm.

Carbon/Graphite Fiber

Lewis-Goetz stocks a large selection of carbon and graphite yarn braided packing which is used primarily in more harsh and demanding applications like high temperature steam, hydrocarbon service in industries like power, refining, pulp & paper and refining. Products in this category are suitable for temperatures ranging from -32°F to 1,200°F, chemical service from 0-14 ph (except for strong oxidizing media applications) and shaft speeds up to 4,000 fpm.

Flexible Graphite

With a full range of sizes, Lewis-Goetz provides a variety of flexible graphite braided packing necessary for high-temperature and high-pressure applications where fire safety and tight sealing is required. Products in this category are suitable for temperatures ranging from 1,200°F, ph ranges of 0-14 (except for strong oxidizing media applications) and pressures up to 4,000 psi and shaft speeds up to 4,000 fpm.

Fluoropolymer

Used in harsh chemical and food applications, Lewis-Goetz has a wide selection of fluoropolymer braided packing sizes. Its ability to resist chemical degradation and contamination in food applications makes it a versatile product for the chemical, food and pharmaceutical industries. Products in this category are suitable for temperatures ranging from -400°F to 500°F, chemical service from 0-14 ph and shaft speeds up to 1,500 fpm.

Kevlar®

Lewis-Goetz carries a variety of sizes of Kevlar® (also called aramid) braided packing, which is a DuPont product that thrives in harsh abrasive type applications. It can be combined with other packing yarns that create better sealing and less shaft wear. Although used in many industries, the power, steel, quarry and waste water industries are where you will find the majority of Kevlar® based packing. Products in this category are suitable for temperatures ranging from -200°F and 500°F, chemical service from 4-12 ph and shaft speeds up to 2,000 fpm.

Die-Formed Rings

Combined with braided end rings to prevent product migration, Lewis-Goetz’s die-formed rings come in a variety of sizes both in flat and “cup and cone” designs. Die-formed rings are typically used in valves where the most strict leakage control is demanded, high-pressure and high-temperature conditions are present and in pumps where a virtual leak free seal is required. They are typically found in the power and refining industries although not limited to. Products in this category are suitable for temperatures between 1,200°F in saturated steam (900°F in oxidizing atmosphere), chemical service from 0-14 ph (except strong oxidizers) and shaft speeds up to 4,000 fpm.

Sealing ProductsBraided Packing

22

23

Sealing Products

Lewis-Goetz supplies component seals in various sizes and designs. Multi-spring, bellows and single spring rotary components come with face combinations in carbon, silicon carbide and tungsten carbide with metallurgy components in 316SS, Hastelloy® C and alloy 20.

The stationary components are made out of ceramic, tungsten carbide and silicon carbide and both the rotary and stationary secondary seals come in fluoropolymer, Viton®, graphite, Kalrez®, EPR, nitrile and neoprene depending on the media and temperature.

Mechanical Seals

Vee Packing

Lewis-Goetz stocks and fabricates a variety of vee packing sets in various sizes, configurations and components to meet all of your hydraulic and pneumatic application needs. Vee packing, with its hinged design, can withstand pressures over 2,500 psi (depending on component configuration) and temperatures up to 500°F (depending on rubber/fabric make-up and/or homogenous fluoropolymer construction).

Lewis-Goetz also supplies deep vee ring packing sets used in deep stuffing box designs where multiple standard rings would be expensive and cumbersome to install. Chevron vee packing is typically found in the primary metals, power and waste/water industries.

U-Seals

Lewis-Goetz supplies a full range of urethane, rubber, fabric and rubber and graphite filled fluoropolymer u-seals to meet all your service needs. U-seals have the ability to handle temperatures up to 500° and pressures in up to 3,500 psi (large ram sizes), 8,000 psi (slow moving equipment) and 30,000 psi (static applications). U-Seals are found in many industries such as power, primary metals, mining and others.

O-Rings

Lewis-Goetz supplies all types, sizes, configurations and material compositions of O-ring materials. From quad rings to back-up rings and Kalrez® to silicone, Lewis-Goetz can be your one stop shop for O-rings.

Hydraulic Seals

ValvesLewis-Goetz provides valves to the tire industry including butterfly valves to control water flow to Banbury mixer and ball valves to control condensation return from the mixer.

Our Full Product Line Includes:

• Butterfly Valves

• Ball Valves

• Check Valves

• Gate Valves

• Brass Valves

Responding to the needs of customers operating in various environments, often hazardous, Lewis-Goetz sources products from large manufacturers such as Honeywell, 3M, Mine Safety Appliance, Bullard, DuPont, PIP and other specialized producers to provide high level, best value protection for Personal Protective Equipment (PPE) requirements covering Head and Face, Hearing, Eye, Arm, Hand, Body and Foot Protection.

Similar effort is used when addressing special needs and exposures: working at heights with Fall Protection (Body Wear, Anchoring Points and Connectors); or working in hazardous or confined locations requiring Gas Detection instruments or Lock out Tag out (LOTO) procedures.

Maintenance, Repair and Operation (MRO)

Lewis-Goetz assists in-plant production and maintenance professionals and contractors with the necessary tools, accessories and supplies to keep locations operating efficiently and cost effectively. Representing many of the best known manufacturers, such as DeWalt, Stanley, Milwaukee, Louisville, Chicago Pneumatic and many others, Lewis-Goetz supplies product and know-how that produces results.

Working with manufacturers of modular offices, tall walls and soft wall partitions, Lewis-Goetz can efficiently alter environments to accommodate new work spaces or physical plant floor changes.

Safety Products & Services

24

25

Whether you are an MRO or OEM, on a company project team or a reseller in the field, Lewis-Goetz is

your local connection to the global resources of our parent company ERIKS, the international industrial

process solution leader. The ERIKS group currently consists of more than 60 group companies with

branches in 27 countries. We provide the highest quality product standards in the industry, along with

the peace-of-mind knowing that our products and fabrication are consistent, location-to-location, across

our extensive footprint.

Local Presence. Global Reach. Industry-Wide Service.

Dots represent ERIKS locations

www.lewis-goetz.com

Please Contact Your Local Division for More Information

Lewis-Goetz also services the following industries:

• Aggregate

• Agriculture

• Chemical Processing

• Construction

• Food Processing

• Government

• Manufacturing

• Mining

• Oil & Gas

• Package Handling

• Petrochemical

• Petroleum Dispensing

• Petroleum Refining

• Pharmaceutical

• Power Generation

• Pulp and Paper/Wood

• Rental

• Steel

• Transport/Bulk Hauling

• Lewis-Goetz Locations

Lewis-Goetz Conveyor Belt

Service Locations•

Solutions for: Tire Manufacturing - · PDF fileValves and Pumps • Molded and Extruded...

Documents

Transcript of Solutions for: Tire Manufacturing - · PDF fileValves and Pumps • Molded and Extruded...