Solutions for Construction Testing
Transcript of Solutions for Construction Testing
Solutions for Construction TestingMachines • Software • Calibration • Service
Bulletin 190-D
2
Scans from original Concrete and Civil Engineering equipment catalog, circa 1910
3
The industrial history of materials testing by machine can be traced to Tinius Olsen, a visionary inventor who built the first universal testing machine. By 1880, he had proven and patented enough of his revolutionary ideas and designs to create an entire line of testing
machines and launch his own company.Over the years, Tinius Olsen introduced and innovatedapplication-specific solutions for materials testing thatspanned the industrial manufacturing and constructionspectrum. After the turn of the century, andthe innovation of motor vehicles and modernhighways, that scope of offerings came toinclude a new product line dedicated to thetesting of cement, concrete, and roadmaterials. Nearly a century later, many of Tinius Olsen’s original designs and technological approaches are still industry standards today, a testament to his knowledge of the sciences, of the nuances of the many natural and man-made materials that make up our world, and of best engineering practices. At Tinius Olsen, we are proud of ourfounder’s legacy and are always seeking tobuild upon it with new and creative systemsthat combine the best of proven materials testing machine technologies with the latest in automation and in digital monitoring, control, and analysis software. We offer equipment for testing high performance metals, the latest engineering grades of plastics, the toughest textiles, and the most exotic composites. Building upon some of the early solutions of our foundershown here, we also offer one of the industry’s mostcomprehensive and reliable lines of products and servicesfor the testing of construction related materials. The breadthof machines and testing resources that follow are allsupported by our A2LA and UKAS accredited technicalteam who keep our ever-growing global customer base upand running with precisely-calibrated testing machinery.
Tinius Olsen. The Man.
The Company. The Materials
Testing Experts.
www.TestingConcrete.com 42
Volume Change Apparatus
Apparatus consists of mold 75x75x285 mm gauge length (Distance between innermost points of reference points) with base plate and four reference points of standard length. Supplied with TO 374Length Comparator.
Supplied As Standard With:TO-37401 Reference Bar 300mm longTO-072 Dial Gauge (Analog) - with TO-374TO-072-DG Digital Gauge - with TO-374-DG TO-376 Prism mold 75 x 75 x 285 mm
Ordering InformationTO-375 Volume Change Apparatus TO-374-DG Length Comparator, Digital 0.001 to 5 mm
Optional AccessoriesTO-37401 Reference Bar 300mm LongTO-072 Dial Gauge (Analog)TO-072-DG Digital GaugeTO-376 Prism Mold, Size 75x75x285mmTO-37601 Prism Mold, Size 100x100x 285mm TO-374-DG Length Comparator
Auto Blaine
Key Features• Single touch operation• Automatic control of the movement of fluid until the upper mark.• Automatic sensing of the upper and lower marks ensuring error free repeatable measurement of the time taken for the liquid coloumn to fall.• Automatic measurement of temperature during the test using a Pt 100 probe.• Automatic correction of formula for calculation of the blaine value per applicable standards (ASTM/EN) with variation in temperature.• Facility to configure and monitor various cement types.• Timing accuracy upto 200mSec.• Up to 10K values may be stored in the internal memory (first time this has to be done by connecting a com-puter / can be done at the factory on request)• Easy and tamper proof calibration using a lockable ball valve
Contact us at: [email protected]
CEMENTSystem Description Tinius Olsen’s Automatic Blaine Apparatus is an automated version of Blaine apparatus and follows the international standards. It is used to determine the fineness of cement using the Blaine air-permeability apparatus, in terms of the specific surface expressed as total surface area in square centimeters per gram, or square meters per kilogram, of cement. Applicable StandardsASTM C204, AASHTO T153, BS 4359, 4550, UNI 7374, EN196, NF P15 442, UNE 80.106.
Supplied As Standard With:TO-391-301 One Air Permeability Apparatus (Blaine Type) consisting ofone Manometer Tube mounted on a stand with sensorTO-391-302-01 Data Acquisition System with vaccum pump fitted in a box at 110VAC, 60Hz, 1 ph.TO-391-302-02 Data Acquisition System with vaccum pump fitted in a box at 220VAC, 60Hz, 1 ph.TO-391-302-03 Data Acquisition System with vaccum pump fitted in a box at 220VAC, 50Hz, 1 ph.TO-39001 Permeability cell with PlungerTO-39003 Perforated Metal DiscTO-39006 Rubber TubeTO-39007 Filter Paper Discs (set of twelve)TO-39008 Dibutylphthalate LiquidTO-39009 PunchTO-39010 Non Perforated Metal DiscTO-39011 Syringe Fitted with Nylon TubeTO-320-5529 RS 232 cable
Ordering Information:For BS/En Standards:TO 391-3-EN-01 Automatic Blaine appratus with standalone data aquisition at 110VAC, 60Hz, 1 ph.
TO 391-3-EN-02 Automatic Blaine appratus with standalone data aquisition at 220VAC, 60Hz, 1 ph.TO 391-3-EN-03 Automatic Blaine appratus with standalone data aquisition at 220VAC, 50Hz, 1 ph
For ASTM Standards:TO 391-3-ASTM-01 Automatic Blaine appratus with standalone data aquisition at 110VAC, 60Hz, 1 ph.TO 391-3-ASTM-02 Automatic Blaine appratus with standalone data aquisition at 220VAC, 60Hz, 1 ph.TO 391-3-ASTM-03 Automatic Blaine appratus with standalone data aquisition at 220VAC, 50Hz, 1 ph.
Optional Accessories:TO-39001 Permeability cell with PlungerTO-39003 Perforated Metal DiscTO-39006 Rubber TubeTO-39007 Filter Paper Discs (set of twelve)TO-39008 Dibutylphthalate LiquidTO-39009 PunchTO-39010 Non Perforated Metal Disc
www.TestingConcrete.com 44
Air permeability Apparatus (Blaine Type)
System DescriptionThis is a variable flow type air permeability apparatus and consists of permeability cell, ‘U’ tube manometer, perforated/non Perforated Metal Disc, Plunger, Rubber tube/stopper, Filter paper, Dibutylphthalate liquid, and punch.
Applicable StandardsASTM C 204, BS:4359 Part 2, Appendix A, AASHTO T153, EN196-6, 459-2, 13286-44
Supplied As Standard With:TO-39001 Permeability CellTO-39002 U' tube Manometer mounted on standTO-39003 Perforated Metal DiscTO-39004 PlungerTO-39005 Rubber StopperTO-39006 Rubber Tube 20cm LongTO-39007 Filter Paper Disc (set of 12)TO-39008 Dibutylohthalate Liquid, 100mlTO-39009 PunchTO-39010 Non Perforated Disc
Ordering InformationTO-390 Air permeability apparatus (Blaine type)
Optional Accessories:TO-39001 Permeability CellTO-39002 U' tube Manometer mounted on standTO-39003 Perforated Metal DiscTO-39004 PlungerTO-39005 Rubber StopperTO-39006 Rubber Tube 20cm LongTO-39007 Filter Paper Disc (set of 12)TO-39008 Dibutylohthalate Liquid, 100mlTO-39009 PunchTO-39010 Non Perforated Disc
Contact us at: [email protected]
CEMENTVicat Apparatus
System DescriptionThe test is used to determine the quantity of water required to produce a cement paste of “standard” consistency; standard consistency is attained when the 10 mm plunger of the Vicat apparatus penetrates the cement paste to a pre-determined depth under free-fall. A new sample is prepared and tested with initial and final needles in accordance with the procedure detailed in the standard being used. The Vicat Apparatus consists of Vicat mould, glass plate, initial and final needle, mild steel baseplate, and Vicat split mold.
Applicable StandardsBS 12, 146, 915, 1370, 4027, 4246, 4248,
ASTM C 191, C 141, C 187, C 308, C 359, C 472 & AASHTO T¬ 129, E 131, EN 196-3, 13454-2
Supplied As Standard With:For En Standards:TO-39301-EN Vicat MoldTO-39302 Glass PlateTO-39303-EN Initial NeedleTO-39304-EN Final NeedleTO-39305 Consistency PlungerTO-39306 Mild steel Base PlateTO-39307 Vicat Mold Split Type with clamping ring
For ASTM Standards:TO-39301-ASTM Vicat MoldTO-39302 Glass PlateTO-39303-ASTM Initial NeedleTO-39304-ASTM Final NeedleTO-39305 Consistency PlungerTO-39306 Mild steel Base PlateTO-39307 Vicat Mold Split Type with clamping ring
Ordering Information:TO-394-EN Vicat apparatus with dashpot to EN standardsTO-394-ASTM Vicat apparatus with dashpot to ASTM standards
Optional Accessories:TO-39301-EN Vicat MoldTO-39302 Glass PlateTO-39303-EN Initial NeedleTO-39304-EN Final NeedleTO-39305 Consistency PlungerTO-39306 Mild steel Base PlateTO-39307 Vicat Mold Split Type with clamping ringTO-39301-ASTM Vicat MoldTO-39303-ASTM Initial NeedleTO-39304-ASTM Final Needle
www.TestingConcrete.com 46
le-Chatelier Mold
System DescriptionThe Le-Chatelier Mold consists of a small split cylinder, which, when assembled, forms a mold with an internal diameter of 30 mm and a height of 30 mm. On either side of the split cylinder, two parallel indicating arms with pointed ends are fixed. The mold construction is such that when a mass of 300 g is applied, this will increase the distance between these indicator arms by 17.5 mm ± 2.5 mm without permanent deformation of the mold.
Two rings are soldered to the upper half of the mold on each side of the central split to make it easier to split the hardened mold at the end of the test.Two rings are soldered to the upper half of the mold on each side of the central split to make it easier to split the hardened mold at the end of the test.
Applicable StandardsBS 6463; EN 196-3, 459-2 Ordering Information TO-400 Le Chatelier Mold
Extensibility of Mold Apparatus (Resistance of Mold Test Apparatus)
System DescriptionLe Chatelier molds need to be checked and calibrated periodically with this unit to check the state of the split cylinder. This unit consists of a metal sleeve with a hook and set screw to fit over one of the mold pointers, and a clamp to fit on to the other pointer of the mold.
Applicable StandardsEN 196 Ordering Information TO-400-S Extensibility of Mold Apparatus
le-Chatelier Flask
Used to determine the specific gravity of hydraulic cement.
Ordering Information TO-401 Le-Chatelier Flask
Contact us at: [email protected]
CEMENTShrinkage Bar Mold
System DescriptionThe use of shrinkage bar molds are also recommended to determine cement soundness; any shrinkage of the specimen is determined by Length Comparator (listed in the concrete section of this catalog). Two models are offered: one has smooth stainless steel reference points and the other has knurled and threaded reference points; both models are available as single mold and multiple mold compartments. Each mold is supplied complete with base plate and two reference points per compartment of mold. Each mold size is 25 x 25 mm section and 250 mm effective length (distance between two innermost reference points).
Applicable StandardsASTM C 151
Ordering InformationTO-402 Mold, one compartment with smooth reference points TO-403 Mold, two compartments with smooth reference points TO-404 Mold, four compartments with smooth reference points TO-405 Mold, one compartment with knurled and threaded reference points TO-406 Mold, two compartment with knurled and treaded reference points TO-407 Mold, four compartment with knurled and treaded reference points
Optional AccessoriesTO-40201 Set of 20, Smooth Reference Points TO-40501 Set of 20, Knurled and Threaded Reference Points
www.TestingConcrete.com 48
Cement Autoclave
Key Features: • Rustproof stainless steel pressure
vessel and enclosure • Microprocessor based PID controller
for accurate control of temperature and pressure
• Three part safety mechanism to protect the operator and equipment
• Simple to use
System Description The Cement Autoclave is ideal for conducting accelerated soundness tests on cement and consists of a stainless steel pressure vessel with insulated outer shell. The temperature and pressure are measured by RTD probes and the system controlled by a PID controller, but the system has a spring-loaded pressure release safety valve to maintain safe operation.
Applicable StandardsASTM C 188, C 141, C 151, C 155 , AASHTO T107
Specifications Working pressure – 21 ± 1kg/cm² at 215° C (300psi at 419° F)
Pressure Vessel – ID 150 mm x 500 mm depthWeight – 70 kgHeater – 2000 Watts
Ordering InformationTO-408-1-01 Cement Autoclave, 110 VAC, 60 Hz, 1 ph TO-408-1-02 Cement Autoclave, 220 VAC, 60 Hz, 1 ph TO-408-1-03 Cement Autoclave, 220 VAC, 50 Hz, 1 ph Optional AccessoriesTO-40801 Heating elementsTO-40802 Silicon rubber lid gasketTO-40803 Spring loaded Safety loaded Safety valve
Contact us at: [email protected]
CEMENTFlow Table
System Description The Flow Table consists of a brass table top 250 ± 2.5 mm dia., mounted on a rigid stand. The table top is reinforced with equally spaced ribs and allowed to drop through 12mm by a ground and hardened cam. The motor drive assembly using the geared motor box is designed to rotate the cam through the shaft at 100 RPM. Suitable for operation on 220 V, 50 Hz/110 V, 60 Hz, single phase AC supply. Complete with flow mold 100 mm base diameter, 70 mm top diameter and 50 mm high. Note: A manually operated version of this flow table is also available. Applicable Standards BS 4551-1, 3892-1, ASTM C 87, C 109, C 185, C 230, C 243, C 348, AASHTO T71, T106, T137 Ordering Information: TO-411-ASTM-01 Flow Table, Electrically Operated, 110V 60Hz TO-411-ASTM-02 Flow Table, Electrically Operated, 220V 60Hz TO-411-ASTM-03 Flow Table, Electrically Operated, 220V 50Hz TO-411-BS-01 Flow Table, Electrically Operated,110V 60Hz TO-411-BS-02 Flow Table, Electrically Operated, 220V 60Hz TO-411-BS-03 Flow Table, Electrically Operated, 220V 50Hz TO-410-BS/ASTM Flow Table, Manually operated, as per BS and ASTM standards
Mortar Mixer
System Description This mixer is designed to mix mortars and cement paste to standard requirements and can be operated in either manual or automatic modes. The mixer features microprocessor control of the speed and mixing program and employs an elliptical mixing motion for thorough and efficient mixing. Specifications: Speeds (RPM) Paddle Mixing Head Low 140 ± 5 62 ±5 High 285 ± 10 125 ± 10 Rated power 180 W Bowl capacity 5 liters Weight 54 kg Dimensions (l x w x h) 530 x 350 x 580 mm Applicable StandardsBS 3892-1, 3892-3, 6463-103, 4551-1, ISO 679, EN 196-1, 196-3, 413-3, 459-2, 1744-1, 13279-2, 1015-2, 13395-1, 13454-2
www.TestingConcrete.com 50
Supplied As Standard With:• Mixing Bowl• Paddle• Scraper• Sand Dispenser• Water Burrete
Ordering InformationTO-412-01 Mortar mixer with sand and water dispenser, 110 VAC, 60 Hz, 1 phTO-412-02 Mortar mixer with sand and water dispenser, 220 VAC, 60 Hz, 1 phTO-412-03 Mortar mixer with sand and water dispenser, 110 VAC, 50 Hz, 1 ph
Vibration Machine
System Description This custom Vibration Machine is used for vibrating molds with mortar mix at a frequency of 200 + 7 Hz. The simple design of the machine allows easy assembly and dismantling of the cube molds after vibration. Each machine is certified for its frequency and is supplied with one TO 414 cube mold.Applicable StandardsBS 4550
Supplied As Standard With: TO-414 Cube Mold 70.6mm
Ordering Information: TO-418-01 Vibration Machine with built-in Digital Timer, 110V 60Hz TO-418-02 Vibration Machine with built-in Digital Timer, 220V 60Hz TO-418-03 Vibration Machine with built-in Digital Timer, 220V 50Hz
Optional Accessories: TO-414 Cube Mold 70.6mm TO-417 Cube Mold 50mm TO-417-3-CI Three gang Mold 50mm
Contact us at: [email protected]
CEMENTCube Molds
The accurate preparation and molding of prisms, cubes and briquettes is vital for successful testing. Molds should be manufactured from material capable of retaining its form under heavy usage. Applicable Standards BS 1881-131; ASTM C109 Ordering Information TO-414 Steel Mold for 70.6 mm cube TO-417 Cast Iron Mold for 50 mm cube
Three-Gang Mold Three-gang mold for 40.1 x 40 x 160 mm mortar prisms and is supplied with a glass plate. Weight 12.2 kg.
TO-417-3-CI Three Gang, Cast Iron Mold for 50 mm cube
TO-417-3-NB Three Gang, Naval Brass Mold for 2 inch cube
TO-457 Three Gang, Steel Mold for 40.1 x 40 x 160 mm Ordering Information TO-417-3-CI Three Gang, Cast Iron Mold for 50 mm cube TO-417-3-NB Three Gang, Naval Brass Mold for 2 inch cube TO-422 Three-gang 40.1x40x160mm made from Cast Iron TO-417-3-NB Three Gang mold 2inch made from Naval Brass
www.TestingConcrete.com 52
Jolting Apparatus
This machine consists of a mold table which is seated on a rotating cam driven at 60 rpm and features push button start/stop control, and automatic stop control at the end of test. Machine is supplied with one mold and hopper. Applicable Standards BS 3892-1, 4551-1, EN 196-1, 413-2, 459-2, 1774-1, 1015-10, 11, 13454-2, ISO 679 Supplied As Standard With: TO-422 Three-gang mold 40.1 x 40 x 160 mm.r Ordering Information TO-421-01 Jolting Apparatus, 110V 60Hz TO-421-02 Jolting Apparatus, 220V 60Hz TO-421-03 Jolting Apparatus, 220V 50Hz TO42201 Feed Hopper
Gauging Trowels
100 to 150 mm/200 mm long blade with straight edge. Weight 210 + 10 g
Ordering InformationTO-428 Gauging Trowel, 100 to 150 mm long bladeTO-429 Gauging Trowel, 200 mm long blade
Contact us at: [email protected]
CEMENTFlexural/Bend Attachment
This attachment is designed for the flexural testing of 40 x 40 x 160 mm mortar cubes.
Applicable StandardsBS 4551-1, EN 196-1, 1015-11, 13454-2
Ordering InformationTO-320-5522 Flexural attachment note: For use with DG, MU, and FA machines.
Compression Frame Jig Assembly
This attachment is designed for testing the compressive strength of mortar cubes, or the block resulting from a flex test specimen. This attachment must be used with the appropriate compression and designed for use with DG, MU, or FA Series of machines.
Applicable StandardsBS 3892-1, EN 196-1, 459-2, 1015-11, EN 13454-2; ASTM C 109
Ordering InformationTO-320-5521 Compression frame attachmentTO-350-5521-03 40 mm square platen set for TO-320-5521
www.TestingConcrete.com 54
Compression Equipment for Brazilian Test
This 200 kN load frame with manual hydraulic pump for loading, it has a self retracting piston, with compression platens selected according to the specimen size. It enables the testing of cube and circular specimens from 50 mm to 100 mm diameter, with a thickness equaling half of the diameter.
Ordering Information TO-207 Load frame
Optional AccessoriesTO-20702 Pair of Semi-circular Jaws, for 50 mm diameter samples. TO-20704 Pair of Jaws for 60 mm diameter samples. TO-20705 Pair of Jaws for 70 mm diameter samples.TO-20706 Pair of Jaws for 80 mm diameter samples. TO-20707 Pair of Jaws for 90 mm diameter samples. TO-20708 Pair of Jaws for 100 mm diameter samples.
116
Standard TitleEquipmentreference
page
E131 Test is used to determine the quantity of water required to produce a cement paste of “standard” consistency.
Vicat Apparatus 45
IP49 In this test, a chosen force is applied over a given area for a know period of time and the depth of penetration or the depression made in the sample is measured in tenths of a millimeter which is expressed as a penetration number.
Universal Penetrometer
70
Bitumen Penetration Kit
71
T22 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
Manual Compression Machines – DG Series
4
Automatic Compression Machines – MU Series
8
Automatic Compression Machines – FA Series
12
T23 Making and Curing Concrete Compression and Flexural Test Specimens In The Field
Curing Tank 36, 37
T49 Standard Method of Test for Penetration of Bituminous Materials
Universal Penetrometer
70
Bitumen Penetration Kit
71
T51 Standard Method of Test for Ductility of Asphalt Materials
Ductility Testing Machine
76
T53 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
Softening Point – Ring & Ball Equipment
724
T58 Test for determining bitumen percentage in Bituminous paving mixtures.
Centrifuge Extractor
75
T71 Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
Flow Table 49
AAShTO
117
Standard TitleEquipmentreference
page
T85 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
Density Basket 58
T88 Standard Method of Test for Particle Size Analysis of Soils
Particle Size Analysis/Sieve Analysis
63
High Speed Stirrer
85
T89 Test for determining the liquid limit of soils. Liquid Limit Device
81
T90 Standard method of test for determining the plastic limit and plasticity index of soils.
Plastic Limit Device
82
T92 Standard method of test for determining the shrinkage factors of soils.
Shrinkage Limit 83
T96 Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
Los Angeles Abrasion Machine
61
T99 These methods of test are intended for determining the relation between the moisture content and density of soils compacted in a mold of a given size with a 2.5-kg (5.5-lb) rammer dropped from a height of 305 mm (12 in.).
Proctor Compaction Apparatus
95
Automatic Soil Compactor
98
T100 This method covers determination of the specific gravity of soils by means of a pycnometer.
Pycnometer 83
T106 Standard method of test for compressive strength of hydraulic cement mortar
Flow Table 49
T107 Standard method of test for autoclave expansion of hydraulic cement.
Length Comparator
41
Cement Autoclave
48
T126 Standard method of test for making and curing concrete test specimens in the laboratory.
Consistometer 29
Motorized Flow Table
29
AAShTO
118
Standard TitleEquipmentreference
page
T129 Standard method of test for normal consistency of hydraulic cement
Vicat Apparatus 45
T134 Standard method of test for moisture-density relations of soil-cement mixtures.
Proctor Compaction Apparatus
95
Automatic Soil Compactor
98
T135 Standard method of test for wetting-and-drying test of compacted soil-cement
Proctor Compaction Apparatus
95
Automatic Soil Compactor
98
T136 Standard method of test for freezing-and-thawing tests of compacted soil-cement mixtures.
Proctor Compaction Apparatus
95
Automatic Soil Compactor
98
T137 Standard method of test for air content of hydraulic Cement Mortar.
Flow Table 49
T152 Standard method of test for air content of freshly mixed concrete by the pressure method.
Air Entrainment Meter – Type B
32
T153 Standard method of test for fineness of hydraulic cement by air permeability apparatus.
Air Permeability Apparatus (Blaine Type)
44
Auto Blaine 42
T160 Standard method of test for length change of hardened hydraulic cement mortar and concrete.
Length Comparator
41
T164 Standard method of test for quantitative extraction of asphalt binder from Hot Mix Asphalt (HMA)
Centrifuge Extractor
75
AAShTO
119
Standard TitleEquipmentreference
page
T180 This method of test is intended for determining the relationship between the moisture content and density of soils when compacted in a given mold of a given size with a 4.54-kg (10-lb) rammer dropped from a height of 457 mm (18 in.).
Proctor Compaction Apparatus
95
Automatic Soil Compactor
98
T193 Standard method of test for the California Bearing Ratio.
Triaxial Test Apparatus
98
CBR Mold 98
T197 Standard method of test for time of setting of concrete mixtures by penetration resistance.
Compaction Factor Apparatus
30
Concrete Penetrometer, Spring Type
30
T215 Standard method of test for permeability of granular soils (constant head)
Laboratory Permeability Apparatus
101
T216 Standard method of test for one-dimensional consolidation properties of soils.
Consolidation Apparatus
100
T217 This test is used to determine the moisture content of soils by means of a calciumcarbide gas pressure moisture tester in the field. The tester is referred to as the“Speedy”.
Speedy Moisture Meter
80
T231 Standard practice for capping cylindrical concrete Specimens.
Cylindrical Specimen Capping Equipment
38
T245 Standard method of test for resistance to plastic flow of bituminous mixtures using Marshall Apparatus.
Marshall Stability Test Machine
72
Automatic Compactor for Bituminous Mixes
73
AAShTO
120
Standard TitleEquipmentreference
page
T256 Standard method of test for pavement deflection measurements.
Benkelman Beam
77
T296 Standard method of test for unconsolidated, undrained compressive strength of cohesive soils in triaxial compression.
Triaxial Test Apparatus
98
T297 Standard method of test for consolidated undrained triaxial compression test on cohesive soils.
Triaxial Test Apparatus
98
TP9 Standard test method for determining the creep compliance and strength of Hot Mix Asphalt (HMA) using the indirect tensile test device
Creep Extensometer
27
AAShTO
AS
Standard TitleEquipmentreference
page
1012 Methods of testing concrete — sampling of fresh concrete
Consistometer 29
121
Standard TitleEquipmentreference
page
C29 Standard test method for bulk density (“unit weight”) and voids in aggregate.
Bulk Density, Voids, and Bulking Measures
59
C31 Standard practice for making and curing concrete test specimens in the field
Cube Molds 34, 51
Beam Molds 35
Cylindrical molds
35
Curing Tank 36
C39 Standard test method for compressive strength of cylindrical concrete specimens
Manual CompressionMachines – DG Series
4
Automatic CompressionMachines – MU Series
8
Automatic CompressionMachines – FA Series
12
C78-02 Standard test method for flexural strength of concrete (using simple beam with third-point loading) , beams, concrete, flexural strength testing
Flexure Testing Machines
20
C87 Standard test method for effect of organic impurities in fine aggregate on strength of mortar
Flow Table 49
C109 Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens)
Flow Table 49
Cube Molds 34, 51
Compression Frame Jig Assembly
53
C127 Standard test method for density, relative density (specific gravity), and absorption of coarse aggregate.
Density Basket 58
ASTM
122
Standard TitleEquipmentreference
page
C131 Standard specification for liquid membrane-forming compounds having special properties for curing and sealing concrete , acid resistance
Los Angeles Abrasion Machine
61
C 138 Standard test method for density (unit weight), yield, and air content (gravimetric) of concrete.
Bulk Density Measures
33
Bulk Density, Voids, and Bulking Measures
59
C141 Standard specification for hydraulic hydrated lime for structural purposes
Vicat Apparatus 45
Cement Autoclave
48
C143 Standard test method for slump of hydraulic-cement concrete
Slump Cone 28
C151 Standard test method for autoclave expansion of hydraulic cement.
Length Comparator
41
Le-Chatelier Flask
46
Cement Autoclave
48
C155 Standard classification of insulating firebrick Cement Autoclave
48
C157 Standard test method for length change of hardened hydraulic-cement mortar and concrete
Length Comparator
41
C185 Standard test method for air content of hydraulic cement mortar
Flow Table 49
C187 Standard test method for normal consistency of hydraulic cement
Vicat Apparatus 45
C188 Standard test method for density of hydraulic cement
Cement Autoclave
48
C191 Standard test methods for time of setting of hydraulic cement by Vicat needle
Vicat Apparatus 45
C192 Standard practice for making and curing concrete test specimens in the laboratory
Curing Tank 36, 37
Cube Molds 34, 51
Beam Molds 35
Cylindrical Molds 35
ASTM
Standard TitleEquipmentreference
page
C204 Standard test methods for fineness of hydraulic cement by air-permeability apparatus
Air Permeability Apparatus (Blaine Type)
44
Auto Blaine 42
C213 Specification for alumina-silica castable refractories for boiler furnaces and incinerators
Air Entrainment Meter – Type A
31
Air Entrainment Meter – Type B
32
C230 Standard specification for flow table for use in tests of hydraulic cement
Flow Table 49
C231 Standard test method for air content of freshly mixed concrete by the pressure method
Air Entrainment Meter – Type A
31
Air Entrainment Meter – Type B
32
Core Case 40
C243 Standard test method for bleeding of cement pastes and mortars
Flow Table 49
C308 Standard test methods for working, initial setting, and service strength setting times of chemical-resistant resin mortars
Vicat Apparatus 45
C348 Standard test method for flexural strength of hydraulic-Cement Mortars
Flow Table 47
C359 Standard test method for early stiffening of hydraulic cement (mortar method)
Vicat Apparatus 44
C403 Standard test method for time of setting of concrete mixtures by penetration resistance
Spring type concrete penetrometer
30
C469 Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression
Lateral Extensometer
25
Longitudinal Compressometer
25
C472 Standard test methods for physical testing of Gypsum, Gypsum plasters, and Gypsum concrete
Vicat Apparatus 44
C490 Standard practice for use of apparatus for the determination of length change of hardened cement paste, mortar, and concrete
Length Comparator
41
ASTM
123
124
Standard TitleEquipmentreference
page
C531 Standard test method for linear shrinkage and coefficient of thermal expansion of chemical resistant mortars, grouts, monolithic surfacings, and polymer concretes
Length Comparator
41
C535 Standard test method for resistance to degradation of large-size coarse aggregate by abrasion and impact in the Los Angeles machine
Los Angeles Abrasion Machine
61
C617 Standard practice for capping cylindrical concrete specimens
Cylindrical Specimen Capping Equipment
38
C1170 Standard test method for determining consistency and density of roller-compacted concrete using a vibrating table
Consistometer 29
D36 Standard test method for softening point of bitumen (ring-and-ball apparatus)
Softening Point Ring-and-Ball Apparatus
74
D113 Standard test method for ductility of bituminous materials
Ductility Testing Machine
76
D217 Standard guide for sampling, test methods, and specifications for electrical insulating oils of petroleum origin
Universal Penetrometer
70
D422 Standard test method for particle-size analysis of soils
Particle Size Analysis Sieve Analysis
63
D427 Test method for shrinkage factors of soils by the mercury method
Shrinkage Limit 83
D558 Standard test methods for moisture-density (unit weight) relations of soil-cement mixtures
Proctor Compaction Apparatus
95
Automatic Soil Compactor
98
D559 Standard test methods for wetting and drying compacted soil-cement mixtures
Proctor Compaction Apparatus
95
ASTM
125
Standard TitleEquipmentreference
page
D560 Standard test methods for freezing and thawing compacted soil-cement mixtures
Proctor Compaction Apparatus
95
Automatic Soil Compactor
98
D698 Standard test methods for laboratory compaction characteristics of soil using standard effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
Proctor Compaction Apparatus
95
Automatic Soil Compactor
98
D854 Standard test methods for specific gravity of soil solids by water pycnometer
Pycnometer 83
D937 Standard test method for cone penetration of petrolatum
Universal Penetrometer
70
D1194 Standard test method for bearing capacity of soil for static load and spread footings
Plate Bearing Test Apparatus
106
D1195 Standard test method for repetitive static plate load tests of soils and flexible pavement Components, for use in evaluation and design of airport and highway pavements
Plate Bearing Test Apparatus
103
D1196 Standard test method for non-repetitive static plate load tests of soils and flexible pavement components, for use in evaluation and design of airport and highway pavements
Plate Bearing Test Apparatus
103
D1321 Standard test method for needle penetration of petroleum waxes
Universal Penetrometer
70
D1403 Standard test methods for cone penetration of lubricating grease using one-quarter and one-half scale cone equipment
Universal Penetrometer
70
D1557 Standard test methods for laboratory compaction characteristics of soil using modified effort
Proctor Compaction Apparatus
95
Automatic Soil Compactor
98
ASTM
126
Standard TitleEquipmentreference
page
D1558 Standard test method for moisture content penetration resistance relationships of fine-grained soils
Proctor Penetrometer
106
D1559 Test method for resistance of plastic flow of bituminous mixtures using Marshall apparatus
Marshall Stability Test Machine
72
D1883 Standard test method for CBR (California Bearing Ratio) of laboratory-compacted soils
CBR Test Machine
85
CBR Mold and Accessories
99
D2172 Standard test methods for quantitative extraction of bitumen from bituminous paving mixtures
Centrifuge Extractor
75
D2434 Standard test method for permeability of granular soils (constant head)
Laboratory Permeability Apparatus
101
D2435 Standard test methods for one-dimensional consolidation properties of soils using incremental loading
Consolidation Apparatus
100
D2850 Standard test method for unconsolidated-undrained triaxial compression test on cohesive soils
Consolidation Apparatus
100
D2884 Standard test method for yield stress of heterogeneous propellants by cone penetration method
Universal Penetrometer
70
D3080 Standard test method for direct shear test of soils under consolidated drained conditions
Direct Shear Test Apparatus
94
ASTM
127
Standard TitleEquipmentreference
page
D4318 Standard test methods for liquid limit, plastic limit, and plasticity index of soils
Liquid Limit Device
81
Plastic Limit Device
82
D4546 Standard test methods for one-dimensional swell or collapse of cohesive soils
Consolidation Apparatus
100
D4767 Standard test method for consolidated undrained triaxial compression test for cohesive soils
Triaxial Test Apparatus
98
D4944 Standard test method for field determination of water (moisture) content of soil by the calcium carbide gas pressure tester
Speedy Moisture Tester
80
E28 Standard test methods for softening point of resins derived from naval stores by ring-and-ball apparatus
Softening Point – Ring-and-Ball Apparatus
74
ASTM
128
Standard TitleEquipmentreference
page
12 Specification for Portland cement Vicat Apparatus 45
146 Specification for Portland blastfurnace cements
Vicat Apparatus 45
598-107 Sampling and examination of bituminous mixtures for roads and other paved areas
Marshall Stability Test Machine
72
Automatic Compactor for Bituminous Mixes
73
Triaxial Test Apparatus
98
812, -2, -110, -111, -112,-120
Testing aggregates Bulk Density Measures
59
Length Comparator
41
Riffle Sample Divider
56
Determination of Flakiness and Elongation
56
Crushing Value Equipment
59
Aggregate Impact Tester with Blow Counter
60
Speedy Moisture Meter
80
Pycnometer 83
Accelerated polishing machine
62
915 Specification for high alumina cement. Metric units
Vicat Apparatus 45
1370 Specification for low heat Portland cement Vicat Apparatus 45
BS
129
BS
Standard TitleEquipmentreference
page
1377, -4, -7
BS methods of test for soils for civil engineering purposes
Riffle Sample Divider
56
Universal Penetrometer
70
Penetration Cone
71
Liquid Limit Device
81
Plastic Limit Device
82
Soil Cone Penetrometer
82
Shrinkage Limit 83
Pycnometer 83
High Speed Stirrer
85
CBR Test Machine
85
Triaxial Test Apparatus
98
Direct Shear Test Apparatus
95
Proctor Compaction Apparatus
95
Compaction Test 97
Automatic Soil Compactor
98
CBR Mold 99
130
Standard TitleEquipmentreference
page
1377, -4, -7
BS methods of test for soils for civil engineering purposes
Consolidation Apparatus
100
Laboratory Permeability Apparatus
101
Plate Bearing Test Apparatus
103
Core Cutter 104
Sand Pouring Cylinder Apparatus
105
1881 -131 Testing concrete Flexure Testing Machines
20
Consistometer 29
Concrete Mixer 33
Concrete Mixer, Drum Type
34
Cube Molds 34, 51
Beam Molds 35
Cylindrical Molds
35
De-Aired Water Apparatus
94
BS
131
BS
Standard TitleEquipmentreference
page
1924, -2, -3
Stabilized materials for civil engineering purposes
Riffle Sample Divider
56
Penetration Cone
71
Plastic Limit Device
82
Soil Cone Penetrometer
82
CBR Test Machine
85
Triaxial Test Apparatus
98
Proctor Compaction Apparatus
95
Compaction Test 97
CBR Mold 99
Sand Pouring Cylinder Apparatus
105
2000 (Part 49)
Methods of test for Petroleum and its products.
Universal Penetrometer
70
Bitumen Penetration Kit
71
Softening Point – Ring & Ball Equipment
74
3892-1, -3 Specification for pulverized fuel ash for use with Portland cement.
Flow Table 49
Mortar Mixer 50
Jolting Apparatus
52
Compression Frame Jig Assembly
53
132
Standard TitleEquipmentreference
page
4027 Specification for Sulfate-resisting Portland cement
Vicat Apparatus 45
4246 Specification for high slag blastfurnace cement
Vicat Apparatus 45
4248 Specification for supersulphated cement Vicat Apparatus 45
4359 Part 2, App A
Methods for determination of specific surface of powders Part 2: Recommended air permeability methods
Air Permeability Apparatus (Blaine Type)
44
4550 Methods of testing cement Vibration Machine
50
4551-1 Mortar. Methods of test for mortar. Chemical analysis and physical testing
Flow Table 49
Mortar Mixer 50
Jolting Apparatus
52
Flexural/Bend Attachment
53
4691 Iron ores. Determination of titanium. Diantipyrylmethane spectrophotometric method
Universal Penetrometer
70
4698 Iron ore pellets. Determination of relative free-swelling index
Universal Penetrometer
70
6073-1 Guide for specifying precast concrete masonry units.
Length Comparator
41
6463, -103 Quicklime, hydrated lime and natural calcium carbonate. Methods for physical testing
Le-Chatelier Mold
46
Mortar Mixer 50
BS
133
Standard TitleEquipmentreference
page
51229 Molds for cube-shaped and cylindrical concrete test specimens.
Cube Molds 34, 51
Beam Molds 35
Cylindrical Molds 35
DIn
Standard TitleEquipmentreference
page
196, -3, -6 Methods of testing cement:Part 3: Determination of setting times and soundnessPart 6: Determination of fineness
Air Permeability Apparatus (Blaine Type)
44
Vicat Apparatus 45
Le-Chatelier Mold 46
Extensibility of Mold Apparatus
46
Mortar Mixer 50
Jolting Apparatus
52
Flexural/Bend Attachment
53
Compression Frame Jig Assembly
53
413-2, -3 Masonry cement - Part 2: Test methods Mortar Mixer 50
Jolting Apparatus
52
459-2 The chemical and physical test procedures for building lime
Air Permeability Apparatus (Blaine Type)
44
Auto Blaine 42
Le-Chatelier Mold 46
Mortar Mixer 450
Jolting Apparatus
52
Compression Frame Jig Assembly
53
En
134
Standard TitleEquipmentreference
page
932-1, -5 Tests for general properties of aggregatesPart 5: Common equipment and calibration
Motorized Sieve Shaker
84
Riffle Sample Divider
56
1015-2, -10, -11
Methods of test for mortar for masonry-Part 2: Bulk sampling of mortars and preparation of test mortars
Part 10: Determination of dry bulk density of hardened mortarPart 11: Determination of flexural and compressive strength of hardened mortar
Mortar Mixer 50
Jolting Apparatus
52
Flexural/Bend Attachment
53
Compression Frame Jig Assembly
53
1097-2, -3, -7
Tests for mechanical and physical properties of aggregatesPart 2: Methods for the determination of resistance to FragmentationPart 3: Determination of loose bulk density and voidsPart 7: Determination of the particle density of fillerPycnometer method
Bulk Density Measures
33
Los Angeles Abrasion Machine
61
Pycnometer 83
1367-4 Tests for thermal and weathering properties of aggregatesPart 4: Determination of drying shrinkage
Length Comparator
41
1426 Method for determining the consistency of bitumen and bituminous binders.
Universal Penetrometer
70
Bitumen Penetration Kit
71
1427 Bitumen and bituminous bindersDetermination of the softening point Ring and Ball method
Softening Point – Ring & Ball Equipment
74
1744-1 Tests for chemical properties of aggregates. Preparation of eluates by leaching of aggregates
Mortar Mixer 50
Liquid Limit Device
81
Jolting Apparatus
52
1924 Methods of test for stabilized soils Automatic Soil Compactor
100
En
135
Standard TitleEquipmentreference
page
1997-2, -3 Geotechnical design - Part 1: General rules provides the general rules for geotechnical design.
Soil Cone Penetrator
82
Pycnometer 83
Slump Cone 28
Liquid Limit Device
81
Plastic Limit Device
82
Consistometer 29
Direct Shear Test Apparatus
94
Proctor Compaction Apparatus
95
Compaction Test 97
Automatic Soil Compactor
98
CBR Mold 99
Consolidation Apparatus
100
Laboratory Permeability Apparatus
101
Plate Bearing Test Apparatus
103
En
136
Standard TitleEquipmentreference
page
12350-2, -3, -6, -7
Testing fresh concrete Bulk Density Measures
59
Air Entrainment Meter – Type A
31
Air Entrainment Meter – Type B
32
Manual CompressionMachines – DG Series
4
Cube Molds 34, 51
12390-1, -2, -3, -4, -5
Test resistance of hardened concrete to compression
Beam Molds 35
Curing Tank 36, 37
Cylindrical Specimen Capping Equipment
38
Automatic CompressionMachines – MU Series
8
Automatic CompressionMachines – FA Series
12
Flexure Testing Machines
20
Marshall Stability Test Machine
72
Automatic Compactor for Bituminous Mixes
73
En
137
Standard TitleEquipmentreference
page
12697-1, -10, -23, -24, -30, -34
Bituminous mixtures ― Test methods for hot mixasphaltPart 22: Wheel tracking
Centrifuge Extractor
75
Triaxial Test Apparatus
98
Mortar Mixer 50
Marshall Stability Test Machine
72
Automatic Compactor for Bituminous Mixes
73
Universal Penetrometer
70
13179-2 Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test
Bitumen Penetration Kit
70
Air Permeability Apparatus (Blaine Type)
43
Auto Blaine 42
CBR Test Machine
85
13286-4, -44, -47
Unbound and hydraulically bound mixtures
Mortar Mixer 50
Vicat Apparatus 45
CBR Test Machine
85
Triaxial Test Apparatus
98
CBR Mold 99
13395-1 Products And Systems For The Protection And Repair Of Concrete Structures. Test Methods. Determination Of Workability. Test For Flow Of Thixotropic Mortars
Mortar Mixer 50
En
138
Standard TitleEquipmentreference
page
13454-2 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate
Jolting Apparatus
52
Flexural/Bend Attachment
53
Compression Frame Jig Assembly
53
Penetration Cone
71
DDENV 1997-2
Soil engineering - testing, design, and remediation.
Point Load Index Tester
107
En
ISO
Standard TitleEquipmentreference
page
679 Method of determining the compressive and, optionally, the flexural strength of cement mortar containing one part by mass of cement, three parts by mass of ISO standard sand and one half part of water.
Mortar Mixer 50
Jolting Apparatus
52
Corporate Headquarters1065 Easton Road, Horsham, PA 19044 USA Tel +1 (215) 675-7100 Fax +1 (215) 441-0899
www.TiniusOlsen.com www.TestingConcrete.com
Tinius Olsen Ltd.6 Perrywood Business Park, Honeycrock Lane, Salfords, Redhill, Surrey, RH1 5DZ, England Tel +44 1737 765001 Fax +44 1737 764768
Tinius Olsen India Private LtdJ3 SDF, NSEZ,Noida Phase 2,U.P. 201305, India
Contact your local representative