Solidworks project presentation Final

12
MULTI- FUNCTIONAL DESK LAMP ANAND SRINIVASAN

Transcript of Solidworks project presentation Final

Page 1: Solidworks project presentation Final

DESIGN OF MULTI-FUNCTIONAL

DESK LAMPANAND SRINIVASAN

Page 2: Solidworks project presentation Final

BRAINSTORMING: DESIGN OPTIONSOption 1: Option 2: Option 3:

Design has an interchangeable basewith the flat base acting as the functional base and the lamp bulb attached to the other base.

Design 2 is a pocket friendly lampwhich has movable compartmentsattached to the base and can be opened sideways and the lamp can behinged on to the base.

Option 3 has a rotatable section which holds the compartments and the lamp bulb itself. This whole assembly can be rotated 90 degrees so as to position the light wherever you want.

Page 3: Solidworks project presentation Final

DESIGN MATRIX

Design 1 and Design 3 have exactly similar matrices. So the best idea would be to combine the features andmake a new design. So the final design will have the base with compartments as from Design 1 and the top part of the design will have a concept close to design 3 with rotational sections.

Page 4: Solidworks project presentation Final

FINAL DESIGN:

Page 5: Solidworks project presentation Final

DESIGN CONSIDERATIONS

• CREATIVE AND UNIQUE DESIGN• USER-FRIENDLY• COST-EFFECTIVE• EASY TO MANUFACTURE• EASY TO ASSEMBLE

Page 6: Solidworks project presentation Final

BENEFITS

• AESTHETIC APPEAL• WOODY FINISH TO MATCH THE INDOORS• COMPARTMENTS ARE EASY TO OPEN

Page 7: Solidworks project presentation Final

PROJECT OVERVIEW:• Product Desk Lamp With Shelved Compartments

• Design divided into three partsa. Bottom Base

b. Top Base

c. Lamp Assembly

Page 8: Solidworks project presentation Final

1ST COMPONENT: BOTTOM BASETHE BOTTOM OF THE LAMP HAS TWO SECTIONS TO IT. BOTTOM SECTION: HAS TWO DRAWERS FOR KEEPING • UTILITIES. • TOP SECTION: HAS THREE SLOTS WITH DOORS. THE ONE ON

THE SIDES ARE NORMAL SHELVES WITH DOORS BUT THE ONE IN THE MIDDLE IS A CHARGING DOCK FOR ELECTRONICS. THE DOCK CAN BE POWERED WHEN THE LAMP IS ON OR BY USING THE CHARGING SLOT PROVIDED AT THE BACK OF THE LAMP.

Page 9: Solidworks project presentation Final

EXPLODED VIEW: BASE

Page 10: Solidworks project presentation Final

2ND COMPONENT: TOP OF THE BASETHE TOP BASE SECTION HAS TWO PENCIL STANDS TO HOLD • STATIONARY ITEMS. • THE BASE HOLDS THE TOP PART OF THE LAMP WITH THE HELP• OF A TRADITIONAL PILLAR LIKE STRUCTURE.

Page 11: Solidworks project presentation Final

FINAL PART OF THE DESIGN: THE TOP OF THE LAMP CONSISTS OF

TWO SIDE SHELVES WITH THE LAMP BULB IN THE MIDDLE.

THE SHELVES HERE HAVE

COMPARTMENTS TO STORE STUFFS.

Page 12: Solidworks project presentation Final

Thank you very much!!