Solid and Fluid Mechanics - TU Delftrene/college/SolidFluid/voorlichting_25... · Solid and Fluid...
Transcript of Solid and Fluid Mechanics - TU Delftrene/college/SolidFluid/voorlichting_25... · Solid and Fluid...
Solid and Fluid Mechanics26 maart 2013
René Delfos - Coordinator Solids & Fluids
[email protected] (015-27)-82963
+ Short Introduction+ Engineering Mechanics (ED & SOCM)
(Hans Goossen)
+ Fluid Mechanics (FM)(Gerrit Elsinga)
+ Praktijk: a study in SFM &an internship at Shell
(Gilles de Combe)
+ Some more stories+ Questions?
2
- Some examples:
- Rattleback
- Fingering ‘Saffman-Taylor instability’- Elastic Fluid
Why study ‘Solid and Fluid Mechanics’?
3
- How much? (in my design)(deformation, strength, resonance frequencies)
-> ME-PME (Precision and Microsystems Engineering)
- How much? (in my design)(chemical conversion, power production)
-> ME-SPET (Sustainable Process & Energy Technology)
- Why and how? (we still could use it in a design)
(‘what is the underlying physics’)
-> ME-SFM (Solid and Fluid Mechanics
SFM is about the fundamentals of Mech. Eng.
Interdepartmental between P&E and PME
Why study ‘Solid and Fluid Mechanics’?
Example pipe friction: Moody-chart? (2)• Movie of Direct Numerical Simulation of ‘realistic’ turbulence
on a 16000-core parallel computer
Example pipe friction: Moody-chart? (3)• Movie of fibres in pipe flow at two different concetrations
α = 20; Re = 5000 α = 60; Re = 7500
MSc Program layout
Courses (1st year)• Obligatory SFM: ~ 29 ECTS
• Obligatory specialisation: ~ 12 ECTS
• Elective: ~ 20 ECTS
• Total 60+ ECTS
• 1st semester: the fundamentals
• 2nd semester: how we use them
Projects (2nd year)• Internship 15 ECTS
• MSc project 45 ECTS
of which 10 ECTS literature study
with oral presentation.
• Possibility to combine internship and MSc project.
• For instance:
Internship in Industry
-> MSc project at University
or vice versa
SpecialisationsFLUID MECHANICS Gerrit Elsingapart of P&E (Process & Energy Technology) dept.
• Fluid MechanicsWesterweel, Boersma, (Ooms, Eckhardt), Delfos
ENGINEERING MECHANICS Hans Goosen
part of PME (Precision and Microsystems Engineering) dept.• Engineering Dynamics
Schwab (Tiso, de Vries, de Klerk) (+vacancy)
• Structural Optimization and Mechanics
van Keulen, (Langelaar), Goosen
18
Internship can be done abroad:Recent in California-Davis, ETH (Zürich), Osaka, NTNU,
DLR (Göttingen), Numeca (Brussels)…But more local is possible as well;
Recent in TUDelft, Teijin, KNMI, Shell, Heerema…
But the best story is a real-life experience:Gilles de Combe
Internship (stage) 15 EC (niet voor ex-HBO!)
20
Can be done in a company, usually in ‘your laboratory’.
Master-thesis project 45 EC
Prediction of turbulent transition through ‘trip wires’ using flow simulation.
Prediction of CT-scanner floor stability
The next step in your career:
• Industry (R&D):
• Philips, ASML, Shell, Tata-steel, Akzo-Nobel, DSM, …
• Canon-OCE, Bronkhorst, NXP, BMW …
• GTI’s: TNO, MARIN, NLR, …
• Process technology, chemical industry, metal industry, energy technology, aeronautics, dredging industry, automotive industry, wind energy, climate control, food & health, meteorology, …
• University (obtaining a Ph.D.): some 50% of SFM-students!
• ‘Education in research’. Later on, R&D or University
Fluid Mechanics Section• 3 full-time prof: J. Westerweel, BJ. Boersma
D. Roekaerts
• 3 part-time prof: G. Ooms, B. Eckhardt
R. Henkes
• 7 U(H)D: R. Delfos, M. Pourquié, D. Tam,C. Poelma, WP. Breugem, Gerrit Elsinga, M. Tummers
• 2 post-docs, 15-18 Ph.D. students.
• Yearly 12-14 M.Sc. students (in SFM, SPET, AP)
www.pe.tudelft.nl/FM
FLUID MECHANICS
25
Engineering Mechanics Groups• Engineering Dynamics
(Schwab, Tiso, de Vries de Klerk)
• Structural Optimization & Computational Mechanics(van Keulen, Goossen, Langelaar…)
26
Research FocusEngineering Dynamics
Focus:
• Multifield
• Multibody
• Dynamics & Statics
Aspects:
• Fundamentals
• Numerical Methods
• Experimental Techniques
Application Fields:
• Microsystems
• Mechatronics
But also:
• Aerospace
• Biomechanics
• Sports
• Automotive
29
Research FocusStructural Optimization & Computational
Mechanics
Focus:
• Multifield• Multilevel• Statics & Dynamics
Aspects:
• Fundamentals• Numerical Methods• Optimization and Design• Experimental Validation
Application Fields:
• Micro-devices and Micro-systems
But also:
• Aerospace• Biomechanics• Maritime
32
Examples of Collaboration
• Infineon
• NXP
• Philips (research)
• ASML
• Dutch Space
• ESA
• AOES
• Bronkhorst High Tech
• Aquamarijn
• OCE
• Univ. of Leeds
• Imtek
• Airbus
• Bosch
• BMW
• Univ. of Stuttgart
• Univ. of Florida
• Technion
• Chalmers
33
SOLID MECHANICS- You probably already joined the presentation of
Precision and Microsystems Engineering (PME)(or contact ir. Jan Neve, PME-coordinator)
FLUID MECHANICS- Join the presentation on Thursday of
Sustainable Processes and Energy Technology (SPET)(or contact dr.ir. Joop ter Horst, SPET-coordinator)
Or just pass by with questions...
(slightly) different interests?
Honours Programme Master (HPM)• A tailor-made rigorous programme of 30 EC for motivated students seeking a
unique challenge in their course work.
• Build your own programme based on an inter- or mono-disciplinary
approach.
• Become part of an active honours community and benefit from social and
networking events.
How does it work?
• Information session
• Selection process
• Match-up with coach
• Planning the programme
• Start 2nd semester of master
• Certificate upon successful completion
More info? www.honours.tudelft.nl
or via our HPM coordinator, prof. Thijs Vlugt
Questions?SFM & FM: René Delfos Room F-1-600
phone 82963 [email protected]: Hans Goosen Room G-1-400
phone 82963 [email protected]
36