Solenoid valveSV10-25 valve, 2-way , normally open

DescriptiónElectromagnetic drive, 2-way, normally open, direct-acting spool-type,screw-in hydraulic cartridge valve, used as a two-way valve.

Obras

Operation of Manual Override Option: When you want to override, pressthe button , rotate counterclockwise 180 ° release. The internal springwill push the button out . In this position, the valve may be only part ofthe movement. To really.Ensure full override shift, pull the button out to its fullest extension andhold it in this position.To return to normal valve function, press the button, in clockwise rotation180 ° release. Manual OverrideMembers will be locked in this position .

Feature

PropertyWorking pressure: 207 bar (3000 psi)

maximum 22.7

Internal Leakage: in 207 bar (3000 psi), the maximum of 82 ml / min(5 cubic inches / min)Temperature range: -40 to 120, the standard nitrile rubber seals

range.

state indicating: response time.

Media: viscosity between 7.4 ~ 420cSt (50 ~ 2000ssu) of mineral oil orsynthetic oil with lubricating

production, please.See section 3.400.1 coil nut information page.

Symbol

Flow (lpm/gpm)

SizeSV10-25

When installing coil, lettersmust face upwards

Manual OverrideOption

Manual Override optionsrelated information,See 1.001.1

The widthof the edge

Manual 5 ft-lbsof torque

maximum

InchMillimeter

Standard E -type line

Material Ordering

None ( blank)Manual OverrideManual OverrideManual Override

Galvanized surface . Nitrile rubber

(standard) .

reference.

3.200.1 .

standards,

the E-type coilUse, see 3.400.1 .

Usually only insert attachments

Sealing materialsNitrile rubber ( standard)

Viton

Standard coil terminal (VDC)

Standard coil terminal (VAC)

E -type coil terminal (VDC)

Wire with Weatherpak®

1/2 inch conduit

It provided with built-in coil diode.

Standard coil voltage

It provided with built-in coil diode.

The electromagnetic valveSV12-25 valve, 2-way , normally open

DescriptiónElectromagnetic drive, 2-way, normally open, direct-acting spool-type,screw-in hydraulic cartridge valve, used as a two-way valve.

Working Principle

spool shifts , thereby turning off the oil -way Flow.

Feature

PropertyWorking pressure : Max 240 bar (3500 psi)

inches

Temperature range: -40 to 120, nitrile rubber seals

Media: viscosity between 7.4 ~ 420cSt (50 ~ 2000ssu) of mineral oil orsynthetic oil with lubricating

Symbol

Flow (lpm/gpm)

Flow (lpm/gpm)

Scope of work

SizeSV12-25

InchMillimeter

The widthof the edge

The widthof the edge

10 ft-lbs of torque(13.5 Nm) maximum

55 ft-lbs of torque

Material Ordering

Steel, Face through hard placeManagement . Galvanized outer

TEF rubber O -rings and ring( standard Quasi- type).

see also 8.012.1 .

consult Factory.

3.400.1 .

Usually onlyinsert attachments

Sealing materialsNitrile rubber ( standard)

Viton

Voltage

Terminal (VDC)

Wireless ring

standard

Other coil voltage can be used for OEM

It provided with built-in coil diode .

Exercise facility .

Solenoid valveSV08-24 valve, 2-way , normally closed

DescriptiónElectromagnetic drive, 2-way, normally closed, direct-acting spool-type,

valve.

Works

Manual Override Function Operating method : To carry out anemergency operation, press the button , rotate counterclockwise180 ° release. The internal spring will push the button out . In thisposition, the valve may be only part of the movement. WishEnsure full override shift, pull the button out to its fullest extension andhold it in this position.To return to normal valve function, press the button, in clockwiserotation 180 ° release. Manual OverrideMembers will be locked in this position.

Feature

PropertyWorking pressure: 207 bar (3000 psi)Flow: Maximum 17 lpm (4.5 gpm)Internal Leakage: in 207 bar (3000 psi), the maximum of 82 ml / min( 5 cubic inches / min)Temperature range : -40 to 120, the standard nitrile rubber seals

range.

Media: viscosity between 7.4 ~ 420cSt (50 ~ 2000ssu) of mineral oil orsynthetic oil with lubricating

production, pleaseSee section 3.400.1 coil nut information page .

Symbol

Flow (lpm/gpm)

SizeSV08-24

When installing coil ,letters must face upwards

Manual OverrideOption

StandardE -type

line

View

5 ft-lbs of

maximum

The widthof the edge

20 ft-lbs of torque(27.1 Nm) maximum

InchMillimeter

Sealing materials

Standardcoil voltage

Standard coilterminal (VDC)

Nitrile rubber ( standard)Viton

Material Ordering

Quasi- type).

Rated pressure up to 240 bar (3500

size can be. Usually onlyinsert attachments

Option( blank)None

Manual OverrideFilter

wire ( 2 )wire , with Weatherpak®

1/2 inch conduit

It provided with built-in coil diode.

Solenoid valve

Symbol

SV12-24 spool valve , 2-way , normally closed

Flow

Flow

v

DescriptiónElectromagnetic drive, 2-way, normally closed, direct operatedsliding type, screw-in hydraulic cartridge valve, used as a two-way shut-off valve.

Feature

PropertyWorking pressure: Max 240 bar (3500 psi)

Leak: pressure of 240 bar (3500 psi) maximum of 410 ml / min( 25 in3 / min)Temperature range: NBR seals -40 ~ 120

2.8 Security

Media: viscosity between 7.4 ~ 420cSt (50 ~ 2000ssu) ofmineral oil or synthetic oil with lubricating

Work restrictionsSuction coil minimum voltage required to close

Size

InchMillimeter

the width

the width

Seals

Voltage

Terminal (VDC)

Wirelessring

Standard BunaFluorocarbons

Maximum

Maximum

Resist twisting

SV12-24

Material Ordering

Face of steel and hard- treated.

nitrile rubber OTFE -rings and rings.

can withstand240 bar (3500 psi) pressure, the SenateSee Section 8.012.1 page. Ball can also beused.Graphite cast iron and steel valve block , thesize of some.

Rugged metal housing , fully encapsulated ,in line with

See page 3.400.1 .

Usually onlyinsert attachments