Page 1 of 1 (Rev. 06/2018)

SolarPROJ_Q_v3.3In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us

Solar Project Questionnaire

Selux engineers will need the following info to begin configuring your solar powered luminaire. Please fill out this form and email to Selux Technical Support to begin the specification process at Selux.Technical@selux.com. Please include any additional notes or unique site requirements in your email.

Which Selux solar luminaire are you considering for your project? Please fill in the catalog configuration below as best as you can. Please refer to luminaire spec sheet for catalog specification codes. Don’t worry about the battery, solar panel or panel mounting angle, Selux Engineers will determine the best configuration based on the information you’ve provided.

Project Name: Project city/state:

Project application: Parking lot Pedestrian Path Pedestrian/Roadway Other:

Why are you considering solar powered lighting? (check all that apply)

Location is off-grid

Other reasons:

LEED points To conserve energy Green project

Luminaire Order Code Optics Mounting Light Engine CCT Finish Quantity

Avanza 450 LED Solar AV4LS

Olivio Medio LED Solar OLMLS

Discera LED Solar DSCLS

What is your desired pole? Please fill in the catalog configuration below as best as you can. Please refer to luminaire spec sheet for catalog specification codes.

Pole Diameter Height Finish Options Quantity

Straight Steel 5” or 6” 12’ 14’ 16’ 18’ other:

Tapered Steel 7” or 8” 12’ 14’ 16’ 18’ other:

Sun Obstruction? Yes No If yes, estimate amount of hours solar panel will be in shade? hours

Motion Detector? Motion detectors can extend battery life and may reduce overall solar luminaire assembly cost by lowering the need for higher capacity batteries as well as reducing maintenance and operational costs. When motion is detected, the luminaire will increase intensity to 100% output. When no motion is detected, luminaire will dim to a predetermined light level.

Yes No

Operational Profile: This will determine the pre-programmed behavior of the solar luminaire assembly. Select from the table below either Custom Profile - Option 1, OR Standard Profile - Options 2 - 10.

Dimmed to 30%

Custom

Operation Profile Sunset Midnight Sunrise

1

2

3

4

5

6

7

8

9

10

TIME PM

All night 100%

All night 30%

4 hrs 0hrs

6 hrs 0hrs

8 hrs 0hrs

2 hrs 2hrs

4 hrs 2hrs

6 hrs 2hrs

8 hrs 2hrs

TIME AM

On 100%

On 100%

On 100%

On 100%

Dimmed to 30%

Dimmed to 30%

Dimmed to 30% all night (This profile intended for use with a motion sensor)

On 100%

On 100%

On 100%

On 100%

On 100%

On 100%

On 100%

Dimmed to 30%

Dimmed to 30%

Dimmed to 30%

Dimmed to 30%

On 100% all night long (This profile not for use with a motion sensor)

Specify: Hours PM Dim Level % Hours AM

Motion Detector allowance? hours Estimated amount of time the luminaire will operate at 100% output based on pedestrian/vehicle activity