Solar panels purchase

Solar Panels PurchaseSolar Panels PurchaseTyler J. Griffith

http://solardiypanels.info

http://solardiypanels.info/

Tyler J. Griffithhttp://solardiypanels.info


If you’re planning on purchasing a solar panel system for your home to cut down on your electric bills, check the following to help you make the right choice:

ManufacturerIt is always best to know who the manufacturer of the solar panels is. There are more than a thousand manufacturers of solar panels around the world. To ensure that warranties can be claimed without any setbacks or delays, choose the manufacturers who have ready distribution networks near your area..



UL Listing The Underwriters Laboratories (UL) has been meticulously testing solar panels for weather resistance, performance, mounting methods and other safety considerations in its testing site in Silicon Valley. Ask if the solar panels are UL Listed.



Rated Power at Standard Test Conditions (STC)In simple terms, this is what you will ask for if you want to buy a specific wattage of the solar panel. So if you want to buy a 220 watt solar panel, make sure that the rated power at STC is 220 watts. Rated Power Per Square Foot This is the measure of rated power of the solar panel for every square foot. It is also known as the “power density.” The measurement that you will get here is important because the higher its value, the less space you will need for the solar panels to generate the energy you need. For example, if the solar panel has a rated power per square foot of 20 watts, you could get 220 watts out of 11 square feet.



Solar Power Efficiency or Module Efficiency (in percentage) This measurement, in percentage, tells you the ratio of the output power to the input power. For example, if the solar panel generates 100 watts of output power from 1,000 watts of solar power that it receives, the solar power efficiency is ten percent. Between 10.3 up to 19.3 percent is the efficiency of most solar panels in the market. Pricewise, the higher the efficiency, the costlier the panel.



Rated Power Tolerance Usually, this is seen as a numeric specification of +/- 5. This measurement means that in certain conditions, the rated power of the solar panel could either increase by five percent or decrease by five percent.



Cell Type Thin film panels use crystalline silicon applied as film directly on the solar panels. These do not have crystal-like features making them easier and faster to produce. They are the cheapest but least efficient type of solar panels.



Polycrystalline (Poly) panels, on the other hand, are made up of a bunch of small crystalline silicon cells that are put together. Poly panels are advertised as cheaper than Mono panels. Monocrystalline (Mono) panels use only one cell from crystalline silicone formed in a large sheet. Mono panels are said to be the most efficient of the three types of solar panels.



So before you start purchasing your solar panels, look closely at the specifications. Always remember that aside from shelling out a substantial amount of money, your solar panels will be with you for at least twenty five years. And good sense dictates that if you’ll live with these panels for at least twenty five years, you should at least try to get to know them better.



With this kind of resources about how to build Solar Diy Panels you will make it like a pro, and if you need information about Solar Panel Purchase then you must check this economic Solar Panel Building System! Act now and get access immediately to this amazing Solar Guide!


Solar Panels PurchaseSolar Panels PurchaseTyler J. Griffith

http://solardiypanels.info

Solar panels purchase

Business

Transcript of Solar panels purchase