Soil Stabilization with Polymers for Road Construction
-
Upload
epa-envirotac-inc -
Category
Engineering
-
view
233 -
download
3
Transcript of Soil Stabilization with Polymers for Road Construction
Soil Stabilization with Polymers for Road Construction
Envirotac – Best Soil Stabilization Solutions Company
Introduction
Following slides will explain how Envirotac polymers provide effective road construction solutions :
Using Chlorides, Lignin, Enzymes, etc. have become outdated soil stabilization practices today. In past few years, lab-made polymers have emerged as the most efficient solution to soil stabilization jobs.
EP&A Envirotac has been providing polymer-based soil stabilization solutions in transportation industry for more than 2 decades. Envirotac polymers has been used around the world to construct roads.
Cost Effective Road Construction SolutionWith Envirotac polymers, dirt runways and heavy haul roads can be constructed at significantly lower cost than traditional methods like lime stabilization, soil cement, bitumen, long-term magnesium chlorides, lignin's, enzymes, etc.
Most effective solution for the construction of heavy haul roads & dirt runways Cost significantly less than lime stabilization, soil cements, bitumen, long term
magnesium chloride & other traditional methods
Strength Equivalent to Concrete, AsphaltMade of acrylic polymers, Envirotac products alter micro-structure of soil particles and bind them strongly together. On treatment with Envirotac soil stabilizers, surfaces exhibit load bearing strength equivalent to asphalt, and ductility higher than concrete.
Envirotac polymers alter micro-structure of soil particles to bind them strongly together
Exhibit load bearing strength equivalent to asphalt, and ductility higher than concrete
Require Maintenance Less FrequentlyOn treatment with Envirotac’s erosion & dust control products, dirt & heavy haul roads require maintenance far too less frequently in comparison to traditional methods. Depending on application and soil type, Envirotac treated roads can last 12 to 24 months.
Require maintenance far too less frequently in comparison to traditional methods Depending on application and soil type, Envirotac treated roads can last 12 to 24
months
Reduce Water Permeability SignificantlyThe acrylic polymers in Envirotac soil stabilizers cover surface with an impenetrable layer, preventing soil from swelling due to water and surface from becoming muddy or slippery. For this quality, Envirotac road stabilization products work effectively in different terrains.
Cover surface with an impenetrable layer of acrylic polymer Prevent soil from swelling due to water and surface from becoming muddy or
slippery
About EP&A EnvirotacEstablished in 1990, EP&A Envirotac Inc. is the pioneer of the technique of using polymers for soil stabilization. Over years, Envirotac line of erosion & dust control polymers has set quality benchmarks for soil stabilization solutions. Envirotac line of polymers for erosion & dust control solutions have application in several industries and are also US Military’s first choice for its domestic, as well as international missions.
Our Transportation Industry Clientele
Contact Us
EP&A Envirotac, Inc. 78-900 Avenue 47, Suite 106,
La Quinta, CA 92253 Phone: (760) 777-8035 http://envirotac.com/ https://www.facebook.com/EPAEnvirotacInc/