Software Release Note 4.4.3-A1
-
Upload
alexander-vasquez -
Category
Documents
-
view
224 -
download
0
Transcript of Software Release Note 4.4.3-A1
-
8/16/2019 Software Release Note 4.4.3-A1
1/102
AT-iMG1400, AT-iMG1500,AT-iMG2400, AT-iMG2500 Series
Software Version 4.4.3 Golden Master
(Software Release Notes)
-
8/16/2019 Software Release Note 4.4.3-A1
2/102
AT-iMG Software Version 4.4.2 Golden Master
Page 2 of 102
AT-iMG Software Version 4.4.3 Golden Master
Copyright © 2015 Allied Telesis KK
Software_Release_Note_4.4.3-A1
All rights reserved. No part of this publication may be reproduced without prior written permission from AlliedTelesis.
Allied Telesis reserves the right to make changes in specifications and other information contained in this documentwithout prior written notice. The information provided herein is subject to change without notice. In no event shallAllied Telesis be liable for any incidental, special, indirect, or consequential damages whatsoever, including but notlimited to lost profits, arising out of or related to this manual or the information contained herein, even if Allied Telesishas been advised of, known, or should have known, the possibility of such damages.
All trademarks are the property of their respective owners.
-
8/16/2019 Software Release Note 4.4.3-A1
3/102
AT-iMG Software Version 4.4.2 Golden Master
Page 3 of 102
Contents
1. INTRODUCTION ...................................................................................................................................................... 8
2.
APPLICABILITY ...................................................................................................................................................... 8
2.1.
SUPPORTED MODELS ........................................................................................................................................... 8
3.
SOFTWARE PACKAGES ...................................................................................................................................... 10
3.1. MAIN APPLICATION CODE FILES MATRIX .......................................................................................................... 10
3.1.1.
Main Application Code via Software Update .......... .......... ........... .......... ........... .......... ........... .......... ........... . 10
3.1.2.
Main Application Code via Web Update .......... .......... ........... .......... ........... .......... ........... .......... ........... ........ 11
3.1.3.
Embedded subsystems .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... ..... 12
3.2.
SPECIAL ENGINEERING LOADS ........................................................................................................................... 12
3.2.1.
Whole flash image file .................................................................................................................................. 12
3.2.2.
UBOOT code ................................................................................................................................................ 13
4.
MAIN APPLICATION CODE ............................................................................................................................... 15
4.1. NEW FEATURES SUPPORTED ON RELEASE 4.4.2 ................................................................................................. 15
4.1.1.
Support for router acceleration on AT-iMG1500 models. ........................................................................... 15
4.1.2.
Support for "nat-hairpinning’ ...................................................................................................................... 15
4.1.3.
Support for Sip Registration timeout parameter into Sip Register message ................................................ 15
4.2.
NEW FEATURES SUPPORTED ON RELEASE 4.4 .................................................................................................... 15
4.2.1.
Support for SNMP RFC2790 Host Resources MIB ...................................................................................... 15
4.2.1.
Support for SNMP ifXTable MIB ................................................................................................................. 15
4.2.2.
Support for snmp traps of link UP and DOWN for switchport interfaces .................................................... 16
4.2.3. Voip - Sip protocol, support for non-intellegent (NI) access device ............................................................ 16
4.2.4. Support for logging IP address of users connected to mediagateway ......... ........... .......... ........... .......... ....... 16
4.2.5. Support for loading a CLI command list configuration file ......................................................................... 16
4.2.6. New CLI commands for support of port range during settings of portmap....... .......... ........... .......... .......... .. 17
4.2.7. New CLI commands to manage flooding of unknown Multicast/Unicast traffic .............. ........... .......... ....... 17
4.2.8. New CLI commands for dhcp client management of broadcast flag .......... .......... ........... .......... ........... ........ 17
4.2.9.
Support for new SFPs plugins ...................................................................................................................... 17
4.3.
NEW FEATURES SUPPORTED ON RELEASE 4.3.3.1 .............................................................................................. 19
4.4.
NEW FEATURES SUPPORTED ON RELEASE 4.3.3 ................................................................................................. 19
4.4.2.
Control of SFP plugins compatibility ........................................................................................................... 19
4.4.2.
Control of VoIP restart mechanism ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... ..... 20
4.4.3.
Control of automatic Software Upgrade via DHCP options ........................................................................ 20
4.4.4.
Control of system restart via SNMP ............................................................................................................. 21
4.4.5. Broadcast/Multicast Storm protection ........... ........... .......... .......... ........... .......... ........... .......... ........... .......... 21
4.4.6. CLI support to override default_button.cfg file ............................................................................................ 21
4.4.7. CLI support for Interfaces description ......................................................................................................... 22
4.4.8. New CLI commands for wireless interface .......... ........... .......... ........... .......... ........... .......... ........... .......... ..... 22
4.4.9. New styles for WEB pages ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... ........ 23
4.4.20.
USB console support for WindowsTM 8 .................................................................................................... 23
4.5.
NEW FEATURES SUPPORTED ON RELEASE 4.3.2 ................................................................................................. 24 4.5.1.
Wi-Fi frequency lock on AT-iMG1405W and AT-iMG1425W ..................................................................... 24
4.5.2.
AT-iMG1405W and AT-iMG1425W: Wireless button is now logged.......... ........... .......... ........... .......... ....... 25
4.5.3.
AT-iMG2524H: Added new log commands for HPNA .......... .......... ........... .......... ........... .......... .......... ......... 25
4.5.4.
AT-iMG2426: EPON SFP management ........... .......... ........... .......... ........... .......... ........... .......... ........... ........ 25
4.5.5.
AT-iMG1400, AT-iMG2400: Support for Allied Telesis SFP compatibility check ......... .......... ........... ........ 25
4.5.6.
AT-iMG2426F: AT-SPTX SFP management ........... .......... ........... .......... ........... .......... ........... .......... ........... . 26
4.5.7.
AW+ CLI: support for "Terminal Length" Command ........... .......... ........... .......... ........... .......... .......... ......... 26
4.5.8. AW+: support for "Exec-Timeout" Command .......... .......... ........... .......... .......... ........... .......... ........... .......... 26
-
8/16/2019 Software Release Note 4.4.3-A1
4/102
AT-iMG Software Version 4.4.2 Golden Master
Page 4 of 102
4.5.9.
AW+: support for Enable/Disable default button ............ .......... .......... ........... .......... ........... .......... ........... ... 26
4.5.10.
Default WEB user support .................. ........... .......... ........... .......... .......... ........... .......... ........... .......... ....... 27
4.5.11.
Watchdog support for voice stack deadlock............................................................................................. 27
4.5.12.
Support for OSGI, DLNA, NAS Storage Service on iMG1600................................................................. 27
4.5.13.
New iMG2726 model ................ .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... ....... 27
4.5.14.
New iMG1605, iMG1625, iMG1625RF models .... ........... .......... ........... .......... ........... .......... ........... ........ 28
4.6.
NEW FEATURES SUPPORTED ON RELEASE 4.3.1 ................................................................................................. 28 4.6.1. AT-iMG1405W and AT-iMG1425W: Support for Wi-fi Multi SSID.............. ........... .......... ........... .......... ..... 28
4.6.2. WEB configuration split management support .......... .......... ........... .......... .......... ........... .......... ........... .......... 29
4.6.3. WAN configuration support via copper LAN interfaces ............................................................................... 30
4.6.4. UPnP full support ........................................................................................................................................ 30
4.6.5.
Show file command now reads also *.txt files .............................................................................................. 31
4.6.6.
SIP User Pseudonym support ....................................................................................................................... 31
4.6.7.
Extended System PSU CLI commands ............. .......... ........... .......... ........... .......... ........... .......... .......... ......... 32
4.6.8.
RFC2863 IF MIB support ................ ........... .......... ........... .......... .......... ........... .......... ........... .......... ........... ... 32
4.6.9.
Extended Tech. support file contents ........... .......... ........... .......... .......... ........... .......... ........... .......... ........... ... 32
4.6.10.
New eDM1405 model .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... . 32
4.7.
NEW FEATURES SUPPORTED ON RELEASE 4.3 .................................................................................................... 33
4.7.1.
New iMG1405W and iMG1425W models ........... ........... .......... ........... .......... ........... .......... ........... .......... ..... 33
4.7.2.
New iMG2426F model .................. .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... ....... 33
4.7.3.
Support for SIP Prefix Replacement ............................................................................................................ 34
4.7.4. Support for Loop Protection ........................................................................................................................ 34
4.7.5. Enhanced IGMP statistics ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... ........ 35
4.7.6. Support for GR909 Metallic Loop Testing ................................................................................................... 35
4.8. NEW FEATURES SUPPORTED ON RELEASE 4.2.3 ................................................................................................. 35
4.8.1. Windows 7 USB driver native support ......................................................................................................... 35
4.8.2.
Extended Ethernet Port Statistics .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ......... 36
4.9.
NEW FEATURES SUPPORTED ON RELEASE 4.2.1 ................................................................................................. 37
4.9.1.
iMG1400 Support for SNMP traps on recovery mode ................................................................................. 37
4.10.
NEW FEATURES SUPPORTED ON RELEASE 4.2 .................................................................................................... 37
4.10.1.
New iMG2524H model ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... ........ 37
4.10.2.
New iMG1405 and iMG1425 models ........... .......... ........... .......... ........... .......... ........... .......... ........... ........ 37
4.10.3.
Port Protected Mode (UFO) support ........... .......... ........... .......... ........... .......... ........... .......... ........... ........ 38
4.10.4.
Dynamic DNS support ................. ........... .......... ........... .......... .......... ........... .......... ........... .......... ........... ... 38
4.10.5. Support for Multicast Routing Acceleration ......................................................................... 38 4.10.6.
Support for SIP FDB Management .......................................................................................................... 39
4.10.7.
Extended DHCP Server Options ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... ..... 39
4.10.8.
Secondary IP Interface support ............................................................................................................... 40
4.10.9. IPV6 Support .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... ........... ... 40 4.10.9.1. Stateless Autoconfiguration .................................................................................................................................. 40
4.10.9.2. Stateful Autoconfiguration (DHCPv6) ................................................................................................................. 41
4.10.9.3. Stateless Autoconfiguration with DHCPv6 options .............................................................................................. 41
4.10.9.4. Router Advertisement Daemon (RADVD) and Prefix-Delegation (PD) .............................................................. 42
4.10.10. HPNA Support ................. ........... .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... ..... 43
4.11. NEW FEATURES SUPPORTED ON RELEASE 4.1.2 ................................................................................................. 44
4.11.1. New iMG2522 model ................ .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... ....... 44
4.11.2.
CLI history logging .................................................................................................................................. 44
4.11.3.
SIP Supplementary services – Call Tranfer and 3way Call ..................................................................... 44
4.11.4. SIP Supplementary services – Warm / Hot Line ...................................................................................... 46
4.11.5. SIP Backup servers .................................................................................................................................. 47
4.11.6.
SIP Alerting Info map .............................................................................................................................. 47
4.11.7.
VoIP POTS – CLI for Immediate versus Timed disconnect mode ........................................................... 48
4.11.8.
VoIP POTS – T.38 Fax over IP support .................................................................................................. 48
4.11.9.
Q-in-Q Support ........................................................................................................................................ 48
4.11.10.
IPv6 Transparent bridging mode .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... ..... 49
4.11.11.
PPPoE over Vlan .......... .......... ........... .......... .......... ........... .......... ........... .......... ........... .......... ........... ........ 49
-
8/16/2019 Software Release Note 4.4.3-A1
5/102
AT-iMG Software Version 4.4.2 Golden Master
Page 5 of 102
4.11.12.
Switch – CLI for Switch fdb ..................................................................................................................... 49
4.11.13.
IP Security – CLI for Firewall and Access-List ....................................................................................... 50
4.11.14.
DHCP server – CLI for local hosts bindings ........................................................................................... 50
4.12.
NEW FEATURES SUPPORTED ON RELEASE 4.1.1 ................................................................................................. 50
4.12.1.
New iMG1525RF model ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... ....... 50
4.12.2.
New iMG2524F model .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 51
4.12.3.
Increased robustness on configuration files and software upgrade checks .......... ........... .......... ........... ... 51 4.12.4. DHCP client identifier (option-61) .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... .. 52
4.12.5. AW+ CLI – Extended system wide commands for priviledged modes. .................................................... 52
4.12.6. AW+ CLI – Improved logging system ...................................................................................................... 53
4.12.7. AW+ CLI – Software Update ................................................................................................................... 53
4.12.8.
AW+ CLI – QoS ....................................................................................................................................... 54
4.12.9.
AW+ CLI – Switch FDB visualization ..................................................................................................... 54
4.12.10.
AW+ CLI – VoIP logging ........................................................................................................................ 55
4.12.11.
AW+ CLI – VoIP SIP Protocol configuration .......................................................................................... 55
4.12.12.
AW+ CLI – VoIP MGCP Protocol configuration ..................................................................................... 57
4.13.
NEW FEATURES SUPPORTED ON RELEASE 4.1 .................................................................................................... 60
4.13.1.
iMG2500 and iMG1500 POTS models .................................................................................................... 60
4.13.2.
SIP VoIP Stack ......................................................................................................................................... 60
4.13.3.
MGCP VoIP Stack ................ ........... .......... ........... .......... .......... ........... .......... ........... .......... ........... .......... 61
4.13.4.
IGMP Snooping ............... ........... .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... ..... 62
4.13.5. Port Ethernet Statistics .................. .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... . 62
4.13.6. Mirror on Ethernet Interfaces .......... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 63
4.13.7. 100Mbps versus 1000Mbps auto negotiation support on iMG1500 ........................................................ 63
4.14. FEATURES SUPPORTED ON RELEASE 4.0 ............................................................................................................. 63
4.14.1. TR69 provisioning.................................................................................................................................... 63
4.14.2.
AW+ provisioning .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... ....... 65
4.14.3.
WEB provisioning .................................................................................................................................... 65
4.14.4.
SNMP provisioning .................................................................................................................................. 66
4.14.5.
Local Craft provisioning ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... ....... 66
4.14.6.
Battery Backup Unit provisioning......... .......... ........... .......... ........... .......... ........... .......... ........... .......... ..... 66
4.14.7.
Well known configuration disaster recovery support .............................................................................. 67
4.14.8.
Dual Image Support .......... ........... ........... .......... ........... .......... .......... ........... .......... ........... .......... ........... ... 67
4.14.9.
Multiple configuration files.............. .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 67
4.14.10.
Software Ugrade via TR69, WEB and CLI (debug only) ......................................................................... 68
4.14.11. Basic Ethernet interfaces configuration support. ............. .......... ........... .......... ........... .......... .......... ......... 69
4.14.12. IEEE 802.1Q (VLANs) .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 69
4.14.13. Switch Rate Limiting ................................................................................................................................ 70
4.14.14. QoS on Ethernet interfaces ...................................................................................................................... 70
4.14.15.
IP bridging ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ....... 71
4.14.16.
IP routing ......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 71
4.14.17.
DHCP Server .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... ........... ... 71
4.14.18.
DNS Client and DNS Proxy .................... .......... ........... .......... ........... .......... .......... ........... .......... ........... ... 72
4.14.19.
Syslog ....................................................................................................................................................... 72
4.14.20.
NAT .......... .......... ........... .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... ........ 73
4.14.21.
Firewall......... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... ... 73
4.14.22.
SNTP ........................................................................................................................................................ 74
5.
MAIN APPLICATION CODE ............................................................................................................................... 75
5.1.
ISSUES RESOLVED ON R ELEASE 4.4.2 GM ......................................................................................................... 75
5.1.1.
SWITCH ....................................................................................................................................................... 75
5.1.2.
VOIP............................................................................................................................................................. 75
5.1.3.
IGMP .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 75
5.1.4.
AW+ CLI ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... ... 75
5.2. ISSUES RESOLVED ON R ELEASE 4.4 GM ............................................................................................................ 76
-
8/16/2019 Software Release Note 4.4.3-A1
6/102
AT-iMG Software Version 4.4.2 Golden Master
Page 6 of 102
5.2.1.
IGMP .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 76
5.2.2.
SYSTEM ....................................................................................................................................................... 76
5.2.3.
SWITCH ....................................................................................................................................................... 76
5.2.4.
AW+ CLI ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... ... 76
5.2.5.
VOIP............................................................................................................................................................. 76
5.3.
ISSUES RESOLVED ON R ELEASE 4.3.3.1 GM ...................................................................................................... 77
5.3.1.
SYSTEM ....................................................................................................................................................... 77 5.4. ISSUES RESOLVED ON R ELEASE 4.3.3 GM ......................................................................................................... 77
5.4.1. SYSTEM ....................................................................................................................................................... 77
5.4.2. VOIP............................................................................................................................................................. 78
5.5. ISSUES RESOLVED ON R ELEASE 4.3.2 GM ......................................................................................................... 78
5.5.1.
SYSTEM ....................................................................................................................................................... 78
5.5.2.
IGMP .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 78
5.5.3.
HPNA ................... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 79
5.5.4.
IPv6 .......... ........... .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... . 79
5.5.5.
SWITCH ....................................................................................................................................................... 79
5.5.6.
VOIP............................................................................................................................................................. 79
5.5.7.
AW+ ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 79
5.6.
ISSUES RESOLVED ON R ELEASE 4.3.1 GM ......................................................................................................... 80
5.6.1.
SYSTEM ....................................................................................................................................................... 80
5.6.2.
SWITCH ....................................................................................................................................................... 80
5.6.3. IPv6 .......... ........... .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... . 81
5.6.4. SIP ................................................................................................................................................................ 81
5.6.5. POTS .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 81
5.7. ISSUES RESOLVED ON R ELEASE 4.3 GM ............................................................................................................ 82
5.7.1. SYSTEM ....................................................................................................................................................... 82
5.7.2.
WEB Interface .............................................................................................................................................. 82
5.7.3.
SWITCH ....................................................................................................................................................... 83
5.7.4.
VOIP............................................................................................................................................................. 84
5.8.
ISSUES RESOLVED ON R ELEASE 4.2.3 GA .......................................................................................................... 84
5.8.1.
Voip MGCP .................................................................................................................................................. 84
5.8.2.
Voip SIP ....................................................................................................................................................... 84
5.8.3.
SWITCH ....................................................................................................................................................... 85
5.8.4.
SYSTEM ....................................................................................................................................................... 86
5.9.
ISSUES RESOLVED ON R ELEASE 4.2.2 GM ......................................................................................................... 86
5.9.1. Voip MGCP .................................................................................................................................................. 86
5.9.2. Voip SIP ....................................................................................................................................................... 86
5.9.3. SWITCH ....................................................................................................................................................... 87
5.10. ISSUES RESOLVED ON R ELEASE 4.2.1 GM ......................................................................................................... 87
5.10.1.
VoIP ......................................................................................................................................................... 87
5.10.2.
SYSTEM ................................................................................................................................................... 87
5.11.
ISSUES RESOLVED ON R ELEASE 4.2 GM (INTERNALLY 4.2_112) ...................................................................... 88
5.11.1.
SYSTEM ................................................................................................................................................... 88
5.11.2.
SWITCH ................................................................................................................................................... 88
5.11.3.
IGMP ............... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 89
5.11.4.
IP ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 89
5.11.5.
DHCP ............. .......... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... ........... . 89 5.11.6.
VoIP SIP .................................................................................................................................................. 89
5.11.7.
Voip MGCP ............................................................................................................................................. 90
5.11.8. VoIP Endpoint ......................................................................................................................................... 90
5.12. ISSUES RESOLVED ON R ELEASE 4.1.2 (INTERNALLY 4.1.2_88) .......................................................................... 91
5.12.1. IP ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 91
5.12.2. SYSTEM ................................................................................................................................................... 91
5.12.3.
SWUPDATE ............................................................................................................................................. 92
5.12.4.
SWITCH ................................................................................................................................................... 93
-
8/16/2019 Software Release Note 4.4.3-A1
7/102
AT-iMG Software Version 4.4.2 Golden Master
Page 7 of 102
5.12.5.
IGMP ............... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 93
5.12.6.
VoIP MGCP ............................................................................................................................................. 94
5.12.7.
VoIP SIP .................................................................................................................................................. 94
5.12.8.
VoIP Endpoint ......................................................................................................................................... 95
5.13.
ISSUES RESOLVED ON R ELEASE 4.1.1 (INTERNALLY 4.1.1_50) .......................................................................... 96
5.13.1.
SYSTEM ................................................................................................................................................... 96
5.13.2.
SNTP ........................................................................................................................................................ 96 5.13.3. QoS .......................................................................................................................................................... 97
5.13.4. Switch & vlan ........................................................................................................................................... 97
5.13.5. IP ........... .......... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... 97
5.13.6. SwUpdate ................................................................................................................................................. 98
5.13.7.
VoIP ......................................................................................................................................................... 99
5.14.
ISSUES RESOLVED ON R ELEASE 4.1 (INTERNALLY 4.1_69) ............................................................................. 101
5.14.1.
SYSTEM ................................................................................................................................................. 101
5.14.2.
SWITCH ................................................................................................................................................. 101
5.14.3.
IGMP ............... ........... .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... ........ 101
5.14.4.
DHCP Server .......... ........... .......... ........... .......... ........... .......... .......... ........... .......... ........... .......... ........... . 101
-
8/16/2019 Software Release Note 4.4.3-A1
8/102
AT-iMG Software Version 4.4.2 Golden Master
Page 8 of 102
1. INTRODUCTION
This document lists new features, solved issues and known issues in AT-iMG1400, AT-iMG1500, AT-iMG2400 and AT-iMG2500 Next Generation gateway Series – version 4.4.3
The document consists in the following sections:
Main Application Code files matrix
Special Engineering loads
New features
Known Issues
2. APPLICABILITY
2.1. Supported models
Software version 4.4.2 is designed to support the following AT-iMG1400 models:
Model Name Supported / Not supported
AT-iMG1405 Support starting from release 4.2.3
AT-iMG1425 Support starting from release 4.2.3
AT-iMG1425RF Support starting from release 4.2.3
AT-iMG1405W Support starting from release 4.3.2
AT-iMG1425W Support starting from release 4.3.2
Table 1. AT-iMG1400 family – existing supported models.
Software version 4.4.2 is designed to support the following AT-iMG1500 models:
Model Name Supported / Not supported
AT-iMG1505 Support starting from release 4.0
AT-iMG1525 Support starting from release 4.1
-
8/16/2019 Software Release Note 4.4.3-A1
9/102
AT-iMG Software Version 4.4.2 Golden Master
Page 9 of 102
AT-iMG1525RF Support starting from release 4.1.1
Table 2. AT-iMG1500 family – existing supported models.
Software version 4.4.2 is designed to support the following AT-iMG2500 models:
Model Name Supported / Not supported
AT-iMG2504 Support starting from release 4.0
AT-iMG2524 Support starting from release 4.0
AT-iMG2522 Support starting from release 4.1.2
AT-iMG2524F Support starting from release 4.1.1
AT-iMG2524H Support starting from release 4.2
Table 3. AT-iMG2500 family – existing supported models.
Software version 4.4.2 is designed to support the following AT-iMG2400 models:
Model Name Supported / Not supported
AT-iMG2426F Support starting from release 4.3
Table 4. AT-iMG2400 family – new family and models.
-
8/16/2019 Software Release Note 4.4.3-A1
10/102
AT-iMG Software Version 4.4.2 Golden Master
Page 10 of 102
3. SOFTWARE PACKAGES
3.1. Main Application Code files matrix
The Main Application Code is released in two main formats:
Software Update package: it’s the set of files that includes the main application code plus mandatory supportfiles (if any) that can be downloaded on the CPE via SwUpdate module.
plus
Web Update package: it’s one file with embedded 4.4.2 main application code. The Web Update package canbe installed through web page access on the CPE.
3.1.1. Main Application Code via Software Update
The following table details the Main Application Code version released through the Software Update package for eachiMG model:
Main Application Code for Software Update
iMG
model typesoftware version Package name Package content (binaries) MD5SUM
iMG1405
4.4.3 iMG1400-4.4.3.zip AT-iMG1400-4.4.3 18a85db28b5f72f202cb663d9063d586
iMG1425
iMG1425RF
iMG1405W
iMG1425W
iMG1505
4.4.3 iMG1500-4.4.3.zip AT-iMG1500-4.4.3 bbbe597a4fe92bd3e9cd3504bfd83958iMG1525
iMG1525RF
iMG2426F 4.4.3 iMG2400-4.4.3.zip AT-iMG2400-4.4.348276ad066bfdae909a7fe11a452cf1a
iMG2504
4.4.3 iMG2500-4.4.3.zip AT-iMG2500-4.4.3 d944dabda00d1fbe597c79ecd8949756
iMG2524
iMG2522
iMG2524F
iMG2524H
-
8/16/2019 Software Release Note 4.4.3-A1
11/102
AT-iMG Software Version 4.4.2 Golden Master
Page 11 of 102
Table 5. Main Application Code binary packages via Software Update.
The software Update Package includes the MD5SUM file.
3.1.2. Main Application Code via Web Update
The following table details the Main Application Code version released through the Web Update package for each iMGmodel:
Main Application Code for Software Update
iMG
model type
software
version Package name Package content (binaries) MD5SUM
iMG1405
4.4.3 iMG1400-4.4.3_WEB.zip AT-iMG1400-4.4.3 18a85db28b5f72f202cb663d9063d586
iMG1425
iMG1425RF
iMG1405W
iMG1425W
iMG1505
4.4.3 iMG1500-4.4.3_WEB.zip AT-iMG1500-4.4.3 bbbe597a4fe92bd3e9cd3504bfd83958iMG1525
iMG1525RF
iMG2426F 4.4.3 iMG2400-4.4.3_WEB.zip AT-iMG2400-4.4.3 48276ad066bfdae909a7fe11a452cf1a
iMG2504
4.4.3 iMG2500-4.4.3_WEB.zip AT-iMG2500-4.4.3 d944dabda00d1fbe597c79ecd8949756
iMG2524
iMG2522
iMG2524F
iMG2524H
Table 6. Main Application Code binary packages via WEB Update.
-
8/16/2019 Software Release Note 4.4.3-A1
12/102
AT-iMG Software Version 4.4.2 Golden Master
Page 12 of 102
3.1.3. Embedded subsystems
Software Version 4.4.2 includes the following subsystems version:
subsystem Version
ATI_INTERNAL_VERSION AtiBcm-4.4.3_01
GWA_CODE_VERSION AtiVoip-2.4_20
UBOOT_CODE_VERSION See Table 9
Table 7. Main Application Code – Embedded subsystems version.
3.2. Special engineering loads
For manufacturing purposes and for special field recovery operations, the Main Application Code is released also in anadditional format: the whole flash image.
The flash image includes the UBOOT startup code plus default configuration scripts plus one copy of the MainApplication Code installed in the main partition
Note that special engineering loads are released in ZIP format file, they MUST be unzipped first.
3.2.1. Whole flash image file
Whole flash image (for manufacturing)
iMG/iBG
model type
softwareversion
Filename Md5sum
iMG1405
4.4.3 AT-iMG1400-4.4.3.image.full 96505ea0d531a6a4062a6e03cb573edd
iMG1425
iMG1425RF
iMG1405W
iMG1425W
iMG1505
4.4.3 AT-iMG1500-4.4.3.image.full b474ad071cb94013767a74bb8fbe98eeiMG1525
iMG1525RF
-
8/16/2019 Software Release Note 4.4.3-A1
13/102
AT-iMG Software Version 4.4.2 Golden Master
Page 13 of 102
iMG2426F 4.4.3 AT-iMG2400-4.4.3.image.full 09f4413b453ef1cca04dd76ea883ec69
iMG2504
4.4.3 AT-iMG2500-4.4.3.image.full b23ebdb630ae62fc037c5f3bdf7ba1ab
iMG2524
iMG2522
iMG2524F
iMG2524H
Table 8. Whole flash images.
Note that special engineering loads cannot be loaded in a production environment. A local serialconnection to the unit is required and the operations can be executed only by qualified personnel.
3.2.2. UBOOT code
UBOOT version (for manufacturing or RMA)
iMG/iBG
model type
UBOOTsoftwareversion
UBOOTscript
version
UBOOT
Config
Version
Filename
Md5sum
iMG1405
1.0.32 1.0.8 1.8 AtiUBoot6828-iMG1400-1.0_32.bin 76DC63CCC2EBF763BB4609559464553A
iMG1425
iMG1425RF
iMG1405W
iMG1425W
iMG1505
1.0.23 1.0.8 1.1 AtiUboot636x-1.0_23.bin 9F674E235F2E3920AD3E18DB5CB86D0FiMG1525
iMG1525RF
iMG2426F 1.0.26 1.0.8 1.2 AtiUBoot6818-iMG2400-1.0_26.bin 2B939E396F69F98B930A3C9644E76B30
iMG2504
1.0.07 1.0.8 1.2 AtiUboot681x-1.0_07.bin FEEE36705EDA49517AB57A98F76DAD15
iMG2524
iMG2522
iMG2524F
iMG2524H
-
8/16/2019 Software Release Note 4.4.3-A1
14/102
AT-iMG Software Version 4.4.2 Golden Master
Page 14 of 102
Table 9. UBOOT code and scripts version.
Note that special engineering loads cannot be loaded in a production environment. A local serial
connection to the unit is required and the operations can be executed only by qualified personnel.
-
8/16/2019 Software Release Note 4.4.3-A1
15/102
AT-iMG Software Version 4.4.2 Golden Master
Page 15 of 102
4. MAIN APPLICATION CODE
4.1. New features supported on release 4.4.2
4.1.1. Support for router acceleration on AT-iMG1500 models.
Software Release 4.4.2 introduced the router acceleration feature (SMP) on iMG1500 models, performances ofrouting/natting have been improved to reach same results of all AT-iMG models
References: CR5676, CR5866
4.1.2. Support for "nat-hairpinning’
With Software Release 4.4.2 has been introduced the possibility to redirect accesses for public services to internal IPnatted locations. An action of “postrouting” has been added via port mapping setting.
References: CR7440
4.1.3. Support for Sip Registration timeout parameter into Sip Register message
To better respond the requests coming from VOIP world with Software Release 4.4.2 it has been improved SIPmodule to be able to manage timeout parameter of SIP registration dialogue.
References: CR7624
4.2. New features supported on release 4.4
4.2.1. Support for SNMP RFC2790 Host Resources MIB
Software Release 4.4 supports now Host Resource MIB for monitoring CPU & memory usage.
References: CR7488
4.2.1. Support for SNMP ifXTable MIB
Software Release 4.4 supports now ifXTable MIB for monitoring wan fiber and lan Ethernet port packet statistics.
References: CR6850
-
8/16/2019 Software Release Note 4.4.3-A1
16/102
AT-iMG Software Version 4.4.2 Golden Master
Page 16 of 102
4.2.2. Support for snmp traps of link UP and DOWN for switchport interfaces
Software Release 4.4 supports now the possibility to enable traps for link up and link down of switchport interfaces.
CLI new command allows to globally enable or disable the feature.
The following CLI commands have been introduced:
awplus(config)# snmp-server enable traps link-statusawplus(config)# no snmp-server enable traps link-status
References: CR4545
4.2.3. Voip - Sip protocol, support for non-intellegent (NI) access device
Software Release 4.4 introduces a new behavior for the media gateway. A Non Intelligent device requires the iMG torespond to and send flash-hook events using SIP INFO messages instead of SIP INVITE messages. This affects callhandling for call-waiting, 3waycall and call transfers.
The following CLI commands have been introduced:
awplus(config-sip-ua)# behavior hook-flash ext-in-call
awplus(config-sip-ua)#no behavior hook-flash ext-in-call
References: CR7496
4.2.4. Support for logging IP address of users connected to mediagateway
Software Release 4.4 adds the possibility to see in log file IP addresses of users connected via telnet or via ssh or viahttp.
References: CR7344
4.2.5. Support for loading a CLI command list configuration file
Software Release 4.4 adds the possibility to load a configuration file entirely written in CLI mode, allowing a better
management of configuration files.
References: CR7386
-
8/16/2019 Software Release Note 4.4.3-A1
17/102
AT-iMG Software Version 4.4.2 Golden Master
Page 17 of 102
4.2.6. New CLI commands for support of port range during settings of portmap
Software Release 4.4 extends CLI commands to allow filtering out unknown multicast/unicast traffic originating fromCPE. The set of commands allow blocking the flooding of multicast/unicast traffic for each interface.
The following CLI commands have been introduced:
awplus(config-if)# ip nat portmap protocol remote-host external-port to local-host internal-port to
References: CR7345
4.2.7. New CLI commands to manage flooding of unknown Multicast/Unicast traffic
Software Release 4.4 extends CLI commands to allow filtering out unknown multicast/unicast traffic originating fromCPE. The set of commands allow blocking the flooding of multicast/unicast traffic for each interface.
The following CLI commands have been introduced:
awplus(config-if)# switchport block unicast
awplus(config-if)# no switchport block unicast
awplus(config-if)# switchport block multicast
awplus(config-if)# no switchport block multicast
References: CR7460
4.2.8. New CLI commands for dhcp client management of broadcast flag
Software Release 4.4 extends CLI commands to allow enabling/disabling of broadcast flag into dhcpclient requestmessage.
The following CLI commands have been introduced:
awplus(config)# interface vlan1
awplus(config-if)# ip dhcp client broadcast-flag
awplus(config-if)# no ip dhcp client broadcast-flag
References: CR5882
4.2.9. Support for new SFPs plugins
Software Release 4.4 includes NEW SFPs plugins for long distance connections to its list of managed SFPs (see alsochap. 4.3.1 for previous list).
For iMG2426F:
AT-SPFXBD-LC-13,
AT-SPTX,
-
8/16/2019 Software Release Note 4.4.3-A1
18/102
AT-iMG Software Version 4.4.2 Golden Master
Page 18 of 102
AT-SPBD10-13,
AT-SPBD20-13/I,
AT-TN-P015-A,
AT-SPBD20EPON-13
AT-SPFX/2
AT-SPFX/15
AT-SPBD40-15/I, AT-SPBD40-13/I,
AT-SPBD40-1270LU,
AT-SPBD40-1290LU,
AT-SPBD40-1310LU,
AT-SPBD40-1330LU,
AT-SPBD40-1350LU,
AT-SPBD40-1370LU,
AT-SPBD40-1390LU,
AT-SPBD40-1410LU,
AT-SPBD40-1430LU,
AT-SPBD40-1450LU,
AT-SPBD40-1470LU, AT-SPBD40-1490LU,
AT-SPBD40-1510LU,
AT-SPBD40-1530LU,
AT-SPBD40-1550LU,
AT-SPBD40-1570LU,
AT-SPBD40-1590LU,
AT-SPBD40-1610LU,
AT-SPBD40-1270HU,
AT-SPBD40-1290HU,
AT-SPBD40-1310HU,
AT-SPBD40-1330HU,
AT-SPBD40-1350HU,
AT-SPBD40-1370HU,
AT-SPBD40-1390HU,
AT-SPBD40-1410HU,
AT-SPBD40-1430HU,
AT-SPBD40-1450HU,
AT-SPBD40-1470HU,
AT-SPBD40-1490HU,
AT-SPBD40-1510HU,
AT-SPBD40-1530HU,
AT-SPBD40-1550HU,
AT-SPBD40-1570HU,
AT-SPBD40-1590HU,
AT-SPBD40-1610HU
For iMG1400 family:
AT-SPFXBD-LC-13,
AT-SPTX,
AT-SPBD10-13,
AT-SPBD20-13/I,
AT-TN-P015-A,
-
8/16/2019 Software Release Note 4.4.3-A1
19/102
AT-iMG Software Version 4.4.2 Golden Master
Page 19 of 102
AT-SPFX/2,
AT-SPFX/15,
AT-SPBD40-15/I ,
AT-SPBD40-13/I
References: CR7338, CR7254, CR7388
4.3. New features supported on release 4.3.3.1
There are no new features on Software Release 4.3.3.1 but only fixes of field issues.
4.4. New features supported on release 4.3.3
4.4.1. Control of SFP plugins compatibility
Software Release 4.3.3 changes the way SFP compatibility control works:
SFP models that belong to the list of well-known and approved SFPs are put in service without any warning to theuser.
SFP models that belong to the list of well-known incompatible SFPs are never put in service and a warning messageis raised to the user and logged in the system log.
SFP models that are unknown are put in service but a warning message is raised to the user and logged in thesystem log.
The list of well-known and approved SFPs is the following.
For iMG2426F:
AT-SPFXBD-LC-13,
AT-SPTX,
AT-SPBD10-13,
AT-SPBD20-13/I,
AT-TN-P015-A,
AT-SPBD20EPON-13
AT-SPFX/2
AT-SPFX/15
For iMG1400 family:
AT-SPFXBD-LC-13,
AT-SPTX,
AT-SPBD10-13,
AT-SPBD20-13/I,
AT-TN-P015-A,
AT-SPFX/2
-
8/16/2019 Software Release Note 4.4.3-A1
20/102
AT-iMG Software Version 4.4.2 Golden Master
Page 20 of 102
AT-SPFX/15
Note that the usage of a SFP not approved by ATI can damage seriously the unit or even causepersonnel injury.
References: CR6970, CR7253, CR7029, CR7155, CR7146
4.4.2. Control of VoIP restart mechanism
Software Release 4.3.3 introduces the possibility to control the way the iMG is restarted when a critical problemhappens on the VoIP stack.
Before release 4.3.3, a critical VoIP problem would cause the entire iMG to restart in order to recover from the VoIPissue.
Starting from release 4.3.3 a configuration parameter has been introduced to instruct the system to perform a specificaction when VoIP crashes:
restart the system
restart only the VoIP stack
log only the crash and do not restart VoIP
The new attribute can be manipulated only via debug commands by setting the following data model object:
InternetGatewayDevice.VoiceProfile.1.X_ALLIEDTELESIS_COM_FailureAction
The values acceptable by this attribute are:
Default - Non-Lucent behavior is Reboot, Lucent behavior is LogOnly
LogOnly - Log the failure event but do not restart Reboot - Log the failure and reboot the device.
References: CR7156, CR7124
4.4.3. Control of automatic Software Upgrade via DHCP options
Software Release 4.3.3 enhances the control of software upgrade when triggered via DHCP options.
It’s now possible to disable TFTP software upgrade by setting statically the ACS URL address or by setting in th e datamodel the attribute:
InternetGatewayDevice.X_BROADCOM_COM_AppCfg.X_ALLIEDTELESIS_COM_SwupdateCfg.DhcpTriggerEnableto be ‘0’ (default is ‘1’ )
A dhcp initiated download only occurs if:
1. DHCP Option 43 is not included in the lease2. Option 60 and 66 are included in the lease3. ACS URL is not configured (Change)
-
8/16/2019 Software Release Note 4.4.3-A1
21/102
AT-iMG Software Version 4.4.2 Golden Master
Page 21 of 102
4. DhcpTriggerEnable data model attribute is set to True
References: CR7156, CR7124
4.4.4. Control of system restart via SNMP
Software Release 4.3.3 introduces the control of system restart via SNMP interface.
It’s now possible to allow a remote SNMP management system to force a system restart by setting to true thefollowing SNMP object:
.enterprises.alliedTelesyn.residentialGateway.iMG1000.sys.sysAdmin.sysRestart
For security reasons, by default this attribute cannot be set.
To enable the sysRestart SNMP object, the following CLI command has been introduced:
awplus(config)# snmp-server system-shutdown
References: CR7137
4.4.5. Broadcast/Multicast Storm protection
Software Release 4.3.3 introduces the support of Broadcast/Multicast storm protection.
The following new CLI command has been introduced:
awplus(config-if)# storm-control broadcast level
or
awplus(config-if)# storm-control multicast level
References: CR6666
4.4.6. CLI support to override default_button.cfg file
Software Release 4.3.3 extends CLI file management commands and make possible to override the default_button.cfgfile by using one existing configuration file or the running configuration.
It’s therefore possible to create default_button.cfg files that are customized per user and that can contains an operative
configuration suitable for the customer.For example a customized user default_button.cfg could contain wireless configuration parameters at their defaultswith a well know public SSID and password while all the remaining iMG configuration is fully operative for all the otherservices.
So all the following CLI commands now work:
awplus# copy test.cfg default_button.cfg
awplus# copy default_button.cfg test.cfg
-
8/16/2019 Software Release Note 4.4.3-A1
22/102
AT-iMG Software Version 4.4.2 Golden Master
Page 22 of 102
awplus# copy running-config default_button.cfg
awplus# move test.cfg default_button.cfg
awplus# move default_button.cfg test.cfg
awplus# delete default_button.cfg
References: CR7229
4.4.7. CLI support for Interfaces description
Software Release 4.3.3 extends CLI commands to support the description field on switch interfaces.
The following new CLI command has been introduced:
awplus(config-if)# description
References: CR5560
4.4.8. New CLI commands for wireless interface
Software Release 4.3.3 extends CLI commands to fully configure wireless interface without requiring access to theWEB interface or TR69 data model.
The extended set of commands is useful when provisioning of iMG1400W models is mainly operated via CLI scripts.
The following command is used to specify the Wi-Fi country, i.e. the range of allowed frequencies for Wi-Fi interface:
awplus(config)# interface dot11radio1.0.1
awplus(config-if-dot11radio)# world-mode dot11d country-code
The following command is used to change the network name on the selected SSID:
awplus(config)# dot11 ssid
awplus(config-if-ssid)# ssid-name
The following command is used to change the host authentication/encryption protocol on the selected SSID:
awplus(config)# dot11 ssid
awplus(config-if-ssid)# wpa-psk ascii
awplus(config-if-ssid)# authentication key-management wpa2-psk
The following command is used to hide/unhide the broadcast of the network SSID:
awplus(config)# dot11 ssid
awplus(config-if-ssid)# no guest-mode
-
8/16/2019 Software Release Note 4.4.3-A1
23/102
AT-iMG Software Version 4.4.2 Golden Master
Page 23 of 102
The following command is used to create and enable a white list of MAC addresses allowed to connect:
awplus(config)# dot11 ssid
awplus(config-if-ssid)# permit 00:22:FB:07:CC:5A
awplus(config-if-ssid)# permit
The following command is used to create and enable a black list of MAC addresses not allowed to connect:
awplus(config)# dot11 ssid
awplus(config-if-ssid)# deny 00:22:FB:07:CC:5A
awplus(config-if-ssid)# deny
The following command is used to change the channel used by the Wi-Fi radio:
awplus(config)# interface dot11radio1.0.1
awplus(config-if-dot11radio)# channel {number of channel| MHz | least-congested}
The following command is used to change the 802.11 protocol family:
awplus(config)# interface dot11radio1.0.1
awplus(config-if-dot11radio)# protocol-family
The following command is used to enable client isolation on the selected SSID:
awplus(config)# dot11 ssid
awplus(config-if-ssid)# client-isolation
References: CR6468
4.4.9. New styles for WEB pages
In Software Release 4.3.3 color and font schemas for WEB pages are changed accordingly to new MarComrecommendations.
References: CR6981
4.4.10. USB console support for WindowsTM
8
The USB universal driver configuration file already release in 4.3.2 is also valid for Windows 8.
References: CR6992
-
8/16/2019 Software Release Note 4.4.3-A1
24/102
AT-iMG Software Version 4.4.2 Golden Master
Page 24 of 102
4.5. New features supported on release 4.3.2
4.5.1. Wi-Fi frequency lock on AT-iMG1405W and AT-iMG1425W
Software Release 4.3.2 introduces the lock of Wi-Fi frequencies depending on the country where the unit is used.
The frequency lock is done at production level, therefore is not possible to remove the lock without RMA the unit.
For the countries where lock is active, the WEB interface does not allow to change the Wi-Fi country (and thereforethe frequencies channels range); for all the other cases the Wi-Fi country can be changed via WEB or via CLI.
References: CR6919, CR6920, CR6932
-
8/16/2019 Software Release Note 4.4.3-A1
25/102
AT-iMG Software Version 4.4.2 Golden Master
Page 25 of 102
4.5.2. AT-iMG1405W and AT-iMG1425W: Wireless button is now logged
Software Release 4.3.2 introduces the support to log wireless button activity when it is pushed to turn on/off wirelessradio.
References: CR6895
4.5.3. AT-iMG2524H: Added new log commands for HPNA
Software Release 4.3.2 introduces the support to log HPNA.
References: CR6968
4.5.4. AT-iMG2426: EPON SFP management
Software Release 4.3.2 introduces the support to manage GEPON SFP on iMG2426 product.
No special CLI commands are needed to enable the feature. The GEPON SFP module is automatically detected andthe interface is referred by CLI commands as port1.0.7 like any other SFP type.
References: CR6928, CR6929
4.5.5. AT-iMG1400, AT-iMG2400: Support for Allied Telesis SFP compatibility check
Software Release 4.3.2 introduces the support to manage only ATI Certified SFP's.
Units produced after release 4.3.2 will have an hard coded configuration flag that prevents SFPs that are not AlliedTelesis to operate. In this case the WAN connection will remain always down and a warning message is prompted anytime a user logins into the system.
Units produced before release 4.3.2 do not have such hard coded configuration flag. Therefore in this case SFPs thatare not Allied Telesis will still work. Also in this case a warning message is prompted any time a user logins into thesystem to inform that the SFP is not Allied Telesis certified.
The following is the list of SFPs supported on release 4.3.2:
AT-SPFXBD-LC-13,
AT-SPTX,
AT-SPBD10-13,
AT-SPBD20-13/I,
AT-TN-P015-A,
AT-SPBD20EPON-13
References: CR6970
-
8/16/2019 Software Release Note 4.4.3-A1
26/102
AT-iMG Software Version 4.4.2 Golden Master
Page 26 of 102
4.5.6. AT-iMG2426F: AT-SPTX SFP management
Software Release 4.3.2 introduces the support to manage AT-SPTX on iMG2426F product.
No special CLI commands are needed to enable the feature. AT-SPTX SFP module is automatically detected and theinterface is referred by CLI commands as port1.0.7 like any other SFP type.
References: CR6927, CR6380
4.5.7. AW+ CLI: support for "Terminal Length" Command
Software Release 4.3.2 introduces the support to manage Terminal Length via AW+ CLI:
For example:
awplus# terminal length 0 (for no pausing)
or
awplus# terminal length 80
References: CR6938
4.5.8. AW+: support for "Exec-Timeout" Command
Software Release 4.3.2 introduces the support to manage session logout via AW+ CLI:
For example:awplus(config-line)# exec-timeout 0 (for no timeout)
or
awplus(config-line)# exec-timeout {} []
References: CR6940
4.5.9. AW+: support for Enable/Disable default button
Software Release 4.3.2 introduces the possibility to disable/enable the Default button functionality.
For example:
awplus(config)# no boot default-button
or
awplus(config)# boot default-button
-
8/16/2019 Software Release Note 4.4.3-A1
27/102
AT-iMG Software Version 4.4.2 Golden Master
Page 27 of 102
When default button is disabled, it’s not possible to force the system to restart executing the configuration associatedto the default button. As consequence the system will boot running a factory (default) configuration.
References: CR6945
4.5.10. Default WEB user support
Software Release 4.3.2 introduces the support for a default WEB user that can access only to split management WEBpages.
The username/password of the default WEB user is: admin/admin.
References: CR6893
4.5.11. Watchdog support for voice stack deadlock
Software Release 4.3.2 introduces the support to detect voice stuck situations and force a system restart to recoverthe system.
References: CR6950
4.5.12. Support for OSGI, DLNA, NAS Storage Service on iMG1600
Software Release 4.3.2 introduces the support for OSGI, DLNA, NAS storage service on iMG1600 products.
This is a feature not supported for the field but only for internal development purposes.
References: CR6923
4.5.13. New iMG2726 model
Software Release 4.3.2 introduces the support of the new model named AT-iMG2726:
The iMG2726 is a iMG2426F based board for GPON application.
Model Name WAN Interface LAN Interface(s) POTS Wireless
AT-iMG2726 SFP 1000/GPON 10/100/1000Tx (6) 2 None
-
8/16/2019 Software Release Note 4.4.3-A1
28/102
AT-iMG Software Version 4.4.2 Golden Master
Page 28 of 102
AT-iMG2726 is not in production yet. GPON SFPs are still under analysis at the time this softwarerelease note is written. Currently AT-iMG2726 can run only active-fiber SFPs at 1000 Mbps.
References: CR6853, CR5738
4.5.14. New iMG1605, iMG1625, iMG1625RF models
Software Release 4.3.2 introduces the support of the new models named AT-iMG1605, AT-iMG1625, AT-iMG1625RF:
The iMG1600 is for GPON application.
Model Name WAN Interface LAN Interface(s) POTS Wireless CATV
AT-iMG1605 1000/GPON 10/100/1000Tx (5) None None None
AT-iMG1625 1000/GPON 10/100/1000Tx (5) 2 None None
AT-iMG1625RF 1000/GPON 10/100/1000Tx (5) 2 None 1
AT-iMG1600 family is not in production yet. GPON SFPs are still under analysis at the time thissoftware release note is written. Currently AT-iMG1625 can run only active-fiber SFPs at 1000Mbps.
References: CR6923
4.6. New features supported on release 4.3.1
4.6.1. AT-iMG1405W and AT-iMG1425W: Support for Wi-fi Multi SSID
Software Release 4.3.1 introduces the support for multiple SSID (max 4) on the wireless interface.
Each SSID can be associated to a different vlan allowing the deployment of multiservice applications over multiplewireless networks.
Configuration of multiple SSIDs is a two stage process:
First, each SSID is associated to the proper vlan via CLI commands
Second, each SSID is customized via WEB interface
-
8/16/2019 Software Release Note 4.4.3-A1
29/102
AT-iMG Software Version 4.4.2 Golden Master
Page 29 of 102
For example:
awplus(config)# dot11 ssid iMG1425W_00_01_71
awplus(config-if-ssid)# vlan 204
awplus(config)# dot11 ssid Guest1
awplus(config-if-ssid)# vlan 202
awplus(config)# dot11 ssid Guest2
awplus(config-if-ssid)# vlan 203
awplus(config)# dot11 ssid Guest3
awplus(config-if-ssid)# vlan 205
At this point, via WEB interface, the user can enable or disable secondary SSIDs, change the descriptions and alsospecify the type of security separately for each SSID.
Note that Wi-Fi standard and channel frequencies are common to all the SSIDs and cannot beconfigured separately for each network.
References: CR6707, CR6602
4.6.2. WEB configuration split management support
Software Release 4.3.1 extends the support for iMG configuration via WEB pages.
In order to display the proper WEB contents, a WEB user with privileges between 9 to 14 must be created:
awplus# configure
awplus(config)# username home-user privilege 9 password my-home-pwd
At this point the following contents are available through WEB GUI:
Summary
WAN Statistics
Routing table configuration
-
8/16/2019 Software Release Note 4.4.3-A1
30/102
AT-iMG Software Version 4.4.2 Golden Master
Page 30 of 102
ARP table contents
DHCP hosts table
DHCP server configuration
NAT reserved mapping configuration
NAT DMZ network configuration
Firewall IP Filtering configuration
Firewall Port Triggering configuration
Firewall Parental Control configuration
Password configuration
References: CR6457, CR6711, CR6712, CR6713, CR6714, CR6715, CR6716, CR6717, CR6718, CR6760, CR6751
4.6.3. WAN configuration support via copper LAN interfaces
Software Release 4.3.1 introduces the possibility to use any LAN interface as uplink WAN interface.
Configuration of the LAN interface follows the same rules as for any trunk interface. The standard WAN interface(SFP or Fiber based) will be left unconfigured and unplugged.
For what concern the management of IGMP messages for video service, i.e. the detection of the multicast routerinterface, the software is able to automatically identify the uplink interface by receiving IGMP queries from the accessnetwork.
Note that only for iMG2426F, LAN5 and LAN6 interfaces cannot be used as uplink WANinterfaces due to limitations on IGMP. Only LAN1 to LAN4 are allowed to be used for uplinkcopper links.
References: CR5349, CR6485, CR5669
4.6.4. UPnP full support
Software Release 4.3.1 introduces full UPnP support when the iMG is used as router with NAT functionality.
In this case the iMG advertises its capability as an Internet Access Device for any UPnP aware client connected to thelocal area network.
UPnP protocol allows internal clients like some Windows applications to configure automatically reserved map ruleson the iMG NAT module accordingly to the service that the application needs to enable.
The NAT reserved map rules configured via UPnP become visible both on the CLI and on the WEB interface but arenot saved in the datamodel.
-
8/16/2019 Software Release Note 4.4.3-A1
31/102
AT-iMG Software Version 4.4.2 Golden Master
Page 31 of 102
To enable UPnP support it’s necessary to specify the outer VLAN where NAT is enabled (this is necessary for multihomed solutions where more than one IP interface could have NAT configured) and the internal VLAN where UPnPSSDP messages need to be advertised.
awplus#(config)# interface vlan
awplus#(config-if)# ip upnp network enable
awplus#(config-if)# exit
awplus#(config)# interface vlan
awplus#(config-if)# ip upnp local enable
awplus#(config-if)# end
References: CR6456
4.6.5. Show file command now reads also *.txt files
The CLI “show file” command now accepts also *.txt files generated by the “show tech” and “show tech all” CLIcommands.
References: CR6674
4.6.6. SIP User Pseudonym support
Software Release 4.3.1 extends the SIP stack functionalities by adding the support for SIP pseudonyms.
It’s now possible to associate to each dial peer pots a strings (alphanumeric) that is used during the registration phaseas local URI. The same string can also be used as termination identifier for incoming calls.
For example:
awplus#(config)# dial-peer voice 1 pots
awplus(config-dial-peer)# destination-pattern 201723239873
awplus(config-dial-peer)# registration-name MrBobBrown-Line1
References: CR6763
-
8/16/2019 Software Release Note 4.4.3-A1
32/102
AT-iMG Software Version 4.4.2 Golden Master
Page 32 of 102
4.6.7. Extended System PSU CLI commands
Starting from Software Release 4.3.1 it’s possible to enable/disable via CLI command the monitoring of Battery Back UPalarm lines. Previously the feature was configurable only via TR69 interface.
The new command is:
awplus#(config)# psu-management
References: CR5129
4.6.8. RFC2863 IF MIB support
Starting from Software Release 4.3.1 it’s possible to read interface packets statistics via SNMP as defined by ifTable inRFC2863.
There is no specific settings for this feature. SNMP ifTable is immediately available as soon SNMP agent is enabled.
References: CR4505
4.6.9. Extended Tech. support file contents
The technical support file contents (see “show tech” CL:I command) has been extended to include information also forthe following modules:
recovery
loop protection
voice translation
port counters
UPnP configuration
References: CR6670, CR 6671, CR 6672, CR 6673, CR6727
4.6.10. New eDM1405 model
Software Release 4.3.1 introduces the support of the new model named AT-eDM1405:
The eDM1405 is a iMG1405 based board for business/industrial application.
Model Name WAN Interface LAN Interface(s) POTS Wireless
AT-eDM1405 SFP 100/1000 10/100Tx (2)
10/100/1000Tx (3)
None Single Band b/g/n
-
8/16/2019 Software Release Note 4.4.3-A1
33/102
AT-iMG Software Version 4.4.2 Golden Master
Page 33 of 102
References: CR6691, CR6726
4.7. New features supported on release 4.3
4.7.1. New iMG1405W and iMG1425W models
Software Release 4.3 introduces the support of the new models named AT-iMG1405W and AT-iMG1425W belongingto the iMG1400 families:
The iMG1405W has the same characteristics as iMG1405 plus wireless interface.
The iMG1425W has the same characteristics as iMG1425W plus wireless interface.
Model Name WAN Interface LAN Interface(s) POTS Wireless
AT-iMG1405W SFP 100/1000 10/100Tx (2)
10/100/1000Tx (3)
None Single Band b/g/n
AT-iMG1425W SFP 100/1000 10/100Tx (2)
10/100/1000Tx (3)
FXS (2) Single Band b/g/n
Both the two new models adopt a Wireless radio card that supports b/g/n modes Single Band at 2.4 GHz.
Software Release 4.3 supports only one SSID (that can be associated to just one vlan to transport untagged ethernetframes). Support for multiple SSID is for future.
Configuration of the wireless interface is mainly performed via WEB interface. CLI commands are needed to assign thewireless network SSID to a specific vlan.
iMG1405W and iMG1425W have also a wireless button accessible on the left side of the unit that allows the user todisable/enable the wireless interface (without the need to use WEB interface or CLI commands).
References: CR5855, CR 3986, CR4349, CR4522, CR6177, CR6580, CR6514, CR6483, CR4347 ,CR4269, CR6519, CR6531,
CR6624, CR6169
4.7.2. New iMG2426F model
Software Release 4.3 introduces the support of the new model named AT-iMG2426F. AT-iMG1405W has the same
characteristics of AT-iMG2524F but it offers 6 LAN interfaces instead of four.
Model Name WAN Interface LAN Interface(s) POTS
AT-iMG2426F SFP 100/1000 10/100/1000Tx (6) FXS (2)
References: CR5776, CR6586, CR6507, CR6357, CR6349, CR6323
-
8/16/2019 Software Release Note 4.4.3-A1
34/102
AT-iMG Software Version 4.4.2 Golden Master
Page 34 of 102
4.7.3. Support for SIP Prefix Replacement
Only for SIP protocol, starting from Software Release 4.3 it’s possible to automatically add a prefix or replace the firstpart of a dialed number.
The administrator can create a set of rules (a translation set) that look for specific patterns in the dialed number andthen perform an action like replace the matching number with another one or add a prefix in front of the dialednumber.
To create a new translation set and assigns an identifier #3 to it:
awplus#(config)# voice translation-rule 3
To create a rule #6 that replaces the prefix 011 with 00:
awplus(config-voi-trans-rule)# rule 6 011 00 replace
To assign a translation set #3 to a POTS interface:
awplus(config)# dial-peer voice 1 pots
awplus(config-dial-peer)# translate-outgoing 3
References: CR4438, CR6629, CR6413
4.7.4. Support for Loop Protection
Software Release 4.3 introduces the Loop Protection feature to protect the iMG from accidental network loops on the
LAN side.When loop protection is activated, LAN interfaces send periodically special loop protection MAC frames (ldif) to poolthe user side network.
If one of the loop protection frames is received back, this is detected as a loop condition and then the sending interfaceis automatically disabled.
Periodically the system will attempt to re-enable the locked interface to check if the loop condition still exists, and incase no loop frames are received, i.e. there is no more loop, the interface is re-enabled.
To enable loop protection a system level:
awplus(config)# loop-protection loop-detect
To activate loop protection on LAN interfaces:
awplus(config)# interface port1.0.1-port1.0.4
awplus(config-if)# loop-protection
SNMP Private TRAPS are also generated when loop-protection detects a loop on one or more LAN interfaces orwhen loop is completely removed.
-
8/16/2019 Software Release Note 4.4.3-A1
35/102
AT-iMG Software Version 4.4.2 Golden Master
Page 35 of 102
A new iMG1000 MIB file containing the loop protection objects and TRAPs definition is released.
References: CR4455, CR6644, CR6521, CR6523, CR6510, CR6477, CR6481
4.7.5. Enhanced IGMP statistics
Software Release 4.3 extends IGMP statistics information by adding the following new CLI commands:
awplus# show ip igmp groups
IGMP IGMP Connected Group Membership
Group Address Interface Uptime Expires Last Reporter
239.255.255.254 port1.0.5 00:21:30 00:03:57 10.17.90.1
224.0.1.60 port1.0.5 00:21:24 00:03:54 10.17.90.31
239.255.255.100 port1.0.5 00:19:52 00:02:38 10.17.90.78
224.2.2.52 dot11radio1.0.1 00:02:56 00:02:30 10.17.90.131
References: CR5946, CR6522, CR6414, CR6381, CR6371
4.7.6. Support for GR909 Metallic Loop Testing
Software Release 4.3 introduces GR909 testing suite for POTS lines
To start GR909 tests, use the following CLI commands:
awplus(config)# test voice-port tel1
then to review the test results use the following command:
awplus# show test voice-port tel1
References: CR3997, CR6352, CR6335
4.8. New features supported on release 4.2.3
Software Release 4.2.3 is mainly designed to fix issues coming from the field and only few features have been added toimprove interoperability and usability.
4.8.1. Windows 7 USB driver native support
Software Release 4.2.3 releases a new USB .inf file for Windows that instructs Windows 7 how use its own UniversalUSB driver when AT-iMG is connected to a USB interface.
-
8/16/2019 Software Release Note 4.4.3-A1
36/102
AT-iMG Software Version 4.4.2 Golden Master
Page 36 of 102
This new USB “driver” makes USB connection much more reliable under Windows 7. In addition a fix on the USB iMGDHCP server has improved to USB connection resolution reducing the time when USB interface is disconnected andthen reconnected to the same iMG.
References: CR 6390,CR6404
4.8.2. Extended Ethernet Port Statistics
Software Release 4.2.3 has extended the support by CLI for MIB-II interface statistics.
The following new CLI commands have been introduced:
awplus# show platform port port1.0.x counters
For Example:
awplus# show platform port port1.0.6 counters
Switch Port Counters
--------------------------------------------------------------------------------
Port 1.0.6 Ethernet MAC counters:
Combined receive/transmit packets by size (octets) counters:
64 860 512 - 1023 0
65 - 127 1218 1024 - MaxPktSz 0
128 - 255 8
256 - 511 1036
General counters:
Receive Transmit
Octets 514454 Octets 730458
Pkts 3122 Pkts 1458
CRCErrors 0
UnicastPkts 1219 UnicastPkts 1377
MulticastPkts 8 MulticastPkts 0
BroadcastPkts 1895 BroadcastPkts 81
FlowCtrlFrms 0 FlowCtrlFrms 0
OversizePkts 0
Fragments 0
Jabbers 0
UpsupportOpcode 0
UndersizePkts 0
Collisions 0
-
8/16/2019 Software Release Note 4.4.3-A1
37/102
AT-iMG Software Version 4.4.2 Golden Master
Page 37 of 102
LateCollisions 0
ExcessivCollsns 0
Miscellaneous counters:
MAC TxErr 0
MAC RxErr 0
Drop Events 0
--------------------------------------------------------------------------------
References: CR 6286
4.9. New features supported on release 4.2.1
Software Release 4.2.1 is mainly designed to fix issues coming from the field after Software Release 4.2 was released.
The following is the only enhancement added in this release:
4.9.1. iMG1400 Support for SNMP traps on recovery mode
Software Release 4.2.1 adds the support for SNMP traps (private) when restarting in recovery mode in order to informa remote management system that the unit needs to be software upgraded.
A new MIB private file is released to export the OIDs of the new added SNMP traps objects.
References: CR 6085
4.10. New features supported on release 4.2
4.10.1. New iMG2524H model
Software Release 4.2 introduces the support of the new model named iMG2524H belonging to the iMG2500 families.
The iMG2524H has the same characteristics as the iMG2524F model but it has HPNA interfaces on the use side.
References: CR 5440
4.10.2. New iMG1405 and iMG1425 models
Software Release 4.2 introduces the support of the new models named iMG1405 and iMG1425 belonging to theiMG1400 families.
The iMG1405 has the same characteristics as the iMG1505
-
8/16/2019 Software Release Note 4.4.3-A1
38/102
AT-iMG Software Version 4.4.2 Golden Master
Page 38 of 102
The iMG1425 has the same characteristics as the iMG1525
Both the two models support SFP module for WAN interface. In addition an external RF module can be plugged forCATV applications.
iMG1400 family supports only a single image partition. A recovery mechanism has been implemented to manage theupgrade of the main partition in the field in case of failure.
All switch ports are 10/100/1000 except for port1.0.3-port1.0.4 that are 10/100 only
References: CR 5045, CR 5049, CR 5417, CR 5435, CR 5925, CR 5955
4.10.3. Port Protected Mode (UFO) support
Protected Mode is a technique to avoid broadcast traffic to flow between two or more interface belonging to the samevlan.
Protected mode is also referred on iMAP system as UFO (Uplink Forwarding Only) mode to highlight the fact that thisfeature is typically used to force communication between hosts to happen only through the uplink network.
To enable Protected mode on an interface:
configure
interface port1.0.3,port1.0.4