Soft Close for Straight Sliding 80 & 100kg -...
-
Upload
nguyenkiet -
Category
Documents
-
view
246 -
download
0
Transcript of Soft Close for Straight Sliding 80 & 100kg -...
Soft Close for Straight Sliding 80 & 100kg
Brio AustraliaP: +61 2 87186718W: E: [email protected]
brio.com.au
Brio UK P: +44 191 2291224W: E:
Brio USA P: +1 585 3195599W: E:
INST100SCT REV B - OCT 2016
Components
100SCT
Applications HC = hanger centre distance from panel end
Single Run 80 & 100
Zero Clearance 80 & 100 & Zero Clearance Glass 80 & 100
No. 4 Allen keyM5x12 cap screw
Soft close mechanism
Track catch plate
8gx1/2" screw
Single Soft Close
Single Soft Close
JAM
B
50 [2"] or 128 [5 1/16"]
2.5-5 [1/8" - 3/16"]
JAM
B
356 [14"] 50 [2"] or 128 [5 1/16"]
Double Soft Close
JAM
B
356 [14"]720 [28 3/8"] MIN.
2.5-5 [1/8" - 3/16"]
50 [2"] or 128 [5 1/16"]
50 [2"] or 128 [5 1/16"]
HC 356 [14"]
JAM
B
JAM
B
22-29 [7/8" - 1 1/8"]
HC
Double Soft Close
356 [14"]720 [28 3/8"] MIN.
JAM
B
22-29 [7/8" - 1 1/8"]
HC HC
Suitable tracks and weight capacities80A - mill = 80kg max.80A - clear anodised = 100kg max.100 - mill = 80kg max.100 - clear anodised = 100kg max.120R - clear anodised = 100kg max. Note must use countersink fixings
80kg max. 100kg max.
Track / Finish
80A100
millmill
Track / Finish
80A100
*120R
clear anodisedclear anodisedclear anodised *Note track fixings must be countersunk
80kg max. 100kg max.
Track Finish Track / Finish
80A100
*120R
clear anodisedclear anodisedclear anodised
*Note track fixings must be countersunk
Capacity
80kg80kg
100kg100kg100kg
Track
80A10080A100
*120R
Track finish
MillMill
Clear anodisedClear anodisedClear anodised
Track & capacities
80A
100
120R
Mill Clear Anodised
80
80
N/A
100
100
100
Tra
ck
Finish
80A
120R*
Mill Clear Anodised
80kg
N/A
100kg
100kgTra
ck
Finish
Note 120 & 120R tracks must be fixed with countersunk screws
System weight capacity dependant on track finish 80A 120R
CA = Clear Anodised
PO
80A Mill 80A CA
80kg
100kg
120R CA
PPP
PPO
80A Mill 80A CA
80kg
100kg
120 Mill
PPPP
O
120 CA
PP
120R CA
PPO
120
NOT PRIMED
PRIMED
Insert clip stop &1st hanger into track, then soft close. The soft close must be in primed position, as shown
JAM
B
Slide soft close along track past the catchbefore pushing up horizontally into track.
Primed
NOT PRIMED
PRIMED
Insert 2nd hanger & attach to soft close with cap screw. Install panel as per system instructions.
JAM
B
Fine adjustment
JAM
B
? Close the panel,If the panel stops too far way from the jamb, move the catch plate closer to the jamb.If the panel hits the jamb too soon, move the catch plate away form the jamb.
Installation Single soft close application shown
Fix catch plate into track through slotted holes with 2 screws only
X
JAM
B
HC 84 [3 5/16"]
45 [1 6/8"]
28 [1 1/8"]
X = HC - 28 [1 1/8"]Example:
HC = 128 [5 1/16"]X = 100 [3 15/16"]
HC = hanger centre line from panel end.First screw is inline with hanger centre line.
Adjust catch plate as required. Secure in final position with the 3rd screw
JAM
B
± 10 [3/8"]
Care & Maintenance Leave with consumer
Maintenance
Annually wipe down the rails of the track with a dry cloth.
RAILS
Adjustment
If the panel ceases to close fully, the soft close devise is adjustable
Soft close device
No. 4 Allen key
Soft close mechanism
M5x12 cap screw
Track catch plate
8gx1/2" screw
Product
Soft Close Care & MaintenanceLeave with consumer
CM100SCT REV A - OCT 2016
Function Brio Soft close provide peace of mind and a sense of qualityas the panel is aided to its rest position in a controlled manner.
CareTo ensure the product provides years of trouble free servicea little maintenance maybe required. Periodically wipe down the rails of the track to remove unwanted build up of dust and dirt that may prevent the wheels rotating smoothly.
JAM
B
Tighten Tighten
Replace locking fix in alternate hole
Slide catch plate
JAM
B
Loosen Loosen
Remove locking
fix
Move panel out of way
JAM
B
AdjustmentOver time there maybe a need to adjust the rest position of the soft close device.