Short-term Effects of Sodium Sulfate and Sodium Chloride ...
SODIUM SULFATE, ANHYDROUS - saltexllc.com · CAS No. 7757-82-6 Rail Carrier: NS SODIUM SULFATE,...
1
CAS No. 7757-82-6 Rail Carrier: NS SODIUM SULFATE, ANHYDROUS Florence, SC Grade: Chemical Intermediate, Detergent, Glass, & Textile Available in Bulk: Hopper Truck, Hopper Car Packaged in: 50 lb. bags, supersacks SPECIFICATION Values 99.500 % min. 10 ppm max 6 ppm max 4 ppm max 3 ppm max 10 ppm max 0.5 % max 7 - 11 0.2 % max 0.2 % max 0.2 % max PROPERTIES Sodium Sulfate (Na 2 SO 4 ) Metallic Impurities (Fe, Cr, Pb, Sb, As) Iron (Fe) Lead (Pb) Arsenic (As) Selenium (Se) Calcium (Ca) + Magnesium (Mg) pH on 10% Solution Chloride Content Water Insoluble Impurities LOD (Moisture) Bulk Density (Poured) Color Particle Size US Standard Mesh Particle Size Specification 1.0 % max +20 Mesh NOTICE: Saltex, LLC makes no warranty or representation as to the suitability of the product as specified for any particular application. The determination of the suitability of the above specification for any particular use is solely the responsibility of the user. All precautionary labels and notices should be read and understood by all supervisory personnel and employees before using. Consult Saltex, LLC and OSHA regulations for additional safety and health information. Purchaser is responsible for complying with all federal, state or local laws and regulations covering use of the product. Special attention should be given to consumer applications. Freedom to use any patent owned by Saltex, LLC or others is not to be inferred from any statement contained herein. Saltex, LLC - Corporate Office 7755 Bellaire Drive South Fort Worth, Texas 76132 Website:www.saltexllc.com Phone: 817.529.2426 Fax: 817.292.1233 Customer Service: 877-8SALTEX -200 Mesh 20% max Typical Screen Analysis 0.0 % - 0.2% 2.0 % - 7.0 % 74 - 105 lb/cu.ft White/ L: 92
Transcript of SODIUM SULFATE, ANHYDROUS - saltexllc.com · CAS No. 7757-82-6 Rail Carrier: NS SODIUM SULFATE,...
CAS No. 7757-82-6
Rail Carrier: NS
SODIUM SULFATE, ANHYDROUS Florence, SC
Grade: Chemical Intermediate, Detergent, Glass, & Textile
Available in Bulk: Hopper Truck, Hopper Car
Packaged in: 50 lb. bags, supersacks
SPECIFICATION
Values99.500 % min. 10 ppm max6 ppm max 4 ppm max 3 ppm max 10 ppm max 0.5 % max
7 - 11 0.2 % max 0.2 % max 0.2 % max
PROPERTIESSodium Sulfate (Na2SO4) Metallic Impurities (Fe, Cr, Pb, Sb, As) Iron (Fe)Lead (Pb)Arsenic (As)Selenium (Se)Calcium (Ca) + Magnesium (Mg) pH on 10% SolutionChloride ContentWater Insoluble Impurities LOD (Moisture)Bulk Density (Poured)Color
Particle Size US Standard Mesh
Particle Size Specification
1.0 % max +20 Mesh
NOTICE: Saltex, LLC makes no warranty or representation as to the suitability of the product as specified for any particular application. The determination of the suitability of the above specification for any particular use is solely the responsibility of the user.
All precautionary labels and notices should be read and understood by all supervisory personnel and employees before using. Consult Saltex, LLC and OSHA regulations for additional safety and health information. Purchaser is responsible for complying with all federal, state or local laws and regulations covering use of the product. Special attention should be given to consumer applications. Freedom to use any patent owned by Saltex, LLC or others is not to be inferred from any statement contained herein.
Saltex, LLC - Corporate Office7755 Bellaire Drive SouthFort Worth, Texas 76132
Website:www.saltexllc.com Phone: 817.529.2426Fax: 817.292.1233
Customer Service: 877-8SALTEX
-200 Mesh 20% max
Typical Screen Analysis0.0 % - 0.2%
2.0 % - 7.0 %
74 - 105 lb/cu.ftWhite/ L: 92
deanc
Valid For:
