Smart Solutions Air Ducts Cleaning Offers...
Transcript of Smart Solutions Air Ducts Cleaning Offers...
Dubai – U A E
Tel: + 971 4 4356742
Smart Solutions Air Ducts Cleaning Offers 2015
Offer Included
1- Introduction 2- Demo ( Air Duct Cleaning ) 3- Industrial Air Duct Cleaning & Deodorizing
Package
2
Air Duct Industrial Cleaning Package
Air Care Industrial Duct & HVAC Cleaning Package Qty Code Description Price AED
1 FG0310 Dust Collector HEPA 3500 CFM TurboJet SuperMax 27,500
1 FG0054 Dust Collector Hose-Heavy Duty 12" X 25' 2,000
3 FG0034 Heavy Duty Air Hose + One Sidewinder Hose Assembly 1,800 1 FG0110 Power Brush System 8,500 1 FG0015 Forward & Reverse Air Whisk System 1,500 1 SAO365 Dryer Duct Cleaning Kit 2,500 1 FG0038 Pogo Pole Hose Adapter ( 12") 1,500 2 FG0011 Light Duty Mylar Hose Assembly 1,000 1 FG0174 Dual Tank Fogger 3,200 1 FG0069 Air Compressor 2HP 125 PSI 6 CFM 100 Litters 3,200 1 FG0066 Video Inspection Camera system Combo 8,700 1 FG0050 Foam Register Plug 14 pcs/pkg 150 1 FG0020 Hole Cutter Drill Powered 500 1 SAO0079 Pellon Filters 12 pcs/pkg 200 4 BA0006 Flex-E Bristles 18" Standard 400 2 BA0003 Bristles, 18" .032" Level Black 400 4 C5000 Duct Pro Power Rod system 3,250 4 SACH0009 Gal. Of ea. Odor Kill, EnviroCon, Dynamite, Soot Set 3,000
10 F0009 1st Stage Filter for TurboJet SuperMax 1,200
10 F0044 2nd
Stage Filter for TurboJet SuperMax 2,000 2 F0046 3
rd Stage Filter for TurboJet SuperMax 2,500
Smart Solutions 3 Days Training + One Year Technical Support Free
Package Total 75,000
3
Professional Air Ducts Cleaning Machines
1- Dust Collector TURBOJET SUPERMAX
The TurboJet SuperMax negative air machine is a
compact workhorse for commercial duct cleaning, but
it's also portable enough for residential jobs. It‟s hard to
believe a 22.5” wide cabinet can provide 3500 CFM and
over 6” static pressure, a full-size 12” inlet, 3-stage
HEPA filtration, soft start and will run at 13 or 18 amps
on a single circuit at 1.5 horsepower or two separate
circuits at 3 horsepower. It comes with a lifetime
warranty. It only weighs 26 pounds more than our 1.5
HP TurboJets, but has TWICE the Horsepower.
This is performance that is found in units twice its size
and weight. The legendary performance and size of this
type of machine has been proven aboard ships and off-
shore drilling rigs, as well as mobile homes and 6,000
room hotels, and yet it is perfect for a one-person
operation out of a van, trailer or box truck. The TurboJet
SuperMax has a state of the art ESP speed control not
found on any other TurboJets, until now.
The power inverter converts power from 1 or 2,
independent, 115-volt single-phase household power to
3-phase 220-volt power. This eliminates the start-up
power surge required by a single speed motor.
FEATURES
Truly portable at 151 lbs and only 22.5"w x 31.5"d x 55"h.
One-person operation, in and out of service vehicle and up and down stairs.
4 speed soft start 3.0 HP motor w/ 3 phase inverter and direct drive backward incline
blower assembly.
Filtration includes 1st stage 18" x 24" x 2" disposable pleated filter, 2nd stage 18" x
24" flexible permanent electrostatic air filter and 3rd stage 18" x 24" x 6" certified
HEPA filter, providing efficient filtration with maximum air flow even when dirty.
12 inch diameter inlet pulls over 5 inches of w.c. static pressure, and 3,500 CFM air
flow (independently tested by an AMCA certified lab with all filters installed).
12" rear, non-marking dolly wheels, 4" swivel non-marking casters up front.
Rugged steel reinforced, rotationally molded, 2-piece poly cabinet with stairwell
friendly design.
Completely field tested by Air-Care, in our service division.
4
Technical Data
Specification Description
Size 22.5” W x 31.5” D x 55 ½” H
Weight 151 lbs
Power required 120 V, 50 or 60 Hz, 13 to 18 amps from one or two power cords
220 volt 50/60 Hz model has one power cord
Power Cord 25’, 3 x 12 Ga. Extension Cords (2)
Filtration 4 stages when Pellon pre-filter used
Pre-Filter Pellon Moisture Barrier
1st Stage 18” x 24” x 2” Disposable Pleated Filter
2nd Stage 18” x 24” x 1/2” Flexible Electrostatic Air Filter
3rd Stage 18” x 24” x 6” Certified Mini-Pleat HEPA Filter
Attachment 12” Dia. Inlet
Operating Environment 25 to 125 Deg. F (-4 to 50 Deg. C)
Construction Rotation Molded Poly
Operating Controls
Power line condition status light (tests building wiring, correctspolarity
errors and safety lockout if ground is not present)
Plug-able Panels with Multiple Speed control, Dual Ammeters, Static
Pressure Gauge, & Circuit Breakers
Air Flow 3500 CFM with all Filters in place
Static Pressure 6.3” W.G.
Motor 3 HP, Variable Speed, Inverter Rated, 3 Phase Motor, 3600 RPM
Variable Speed, Dual Voltage Motor Inverter Input 120 VAC, 50/60 Hz, 15 or 20 Amp each One or Two separate
household circuits.
Blower One - Backward Inclined
Wheels Two - 12” Fixed Rear and Two - 4” Front Swivel Non-Marking Wheels
5
2- Power Brush System COPRA 5
The new Cobra 5 Power Brush system from
Air-Care is an advanced version of the
workhorse that has been aggressively
cleaning air ducts for over 3 decades.
Continuously Variable Speed Control
35 Ft Long Cable/Brush
Forward/Reverse
Wired Remote
The Cobra 5 has a wired, handheld remote. It
has Forward, Stop, and Reverse functions at
the operators finger tips. Of course there are
manual backup controls on the main motor
box also. A guide to speed selection for most
jobs is contained on the inside of the motor
box.
The control panel has a variable speed motor
dial that allows you to go from 0-1750 RPM.
The motor has plenty of torque to run the standard 3/8" steel cored cable for most
ducts, but also has a "Low Torque" setting for use with the Dryer Duct Cable and 4"
diameter brush or the Nest Claw.
The cable mount is the same as all previous Cobra Cables, so you have backward
compatibility as well as forward compatibility with other models of Air-Care Cobras.
6
Technical Data Specification COBRA-5
Size: 11.5" W x 15" L x 10" H.
Weight: Motor Case with Remote: 28 lbs. - 3/8" Cable & Brush: 14 lbs. - Dryer duct cable &
Brush: 5 lbs.
Power
requirements: 115v 60 Hz AC, 7.5 amps (Optional 220 Volt 50/60 Hz)
Power Cord: 9 foot grounded plug with "computer" type connecting socket
Cable Sizes:
Standard: 3/8" Core, 3/4" O.D. Nylon Housing, 35’ Long (optional 50 ft cable
available)
Optional: 5/16" core, ½" Housing Dryer Duct Cable, available in 20-Foot or 35-
Foot Lengths. Comes with 4" Dryer Duct Brush.
Brushes:
Standard: 18" Flex-E-Bristle Brush, Standard Black Bristles, for 4" to 18" ducts.
Optional: 12" Flex-E-Bristle Brush, Standard Black Bristles, for 4" to 12" ducts.
Optional: 36" Flex-E-Bristle Brush, Commercial Black Bristles, for 14" to 30" ducts
Optional: 4" Dryer Duct Brush, w/ Lint Buster Ball, for Flatted Cobra Cable
Operating
Environment: 25 to 125 Deg. F (-4 to 50 Deg. C)
Construction: High Impact Black ABS with Hinged cover to protect controls
Panel Controls: Power Switch, Speed Dial and Fwd-Stop-Rev switch on Motor Unit
Remote 15’ Remote Cable, FWD-Stop-Reverse
Controller: 90 Volt DC Controller with Speed, Torque and Load Correction with "HIGH" and
"LOW" Torque Settings
Motor: 1/2 HP, 90 Volt High Torque DC Motor, 0-1750 RPM
7
3- VIS Duct Inspection System
Introducing the Air-Care Video Inspection System. Our
new VIS is an all-in-one package that is easy to transport
and even easier to use.
Now, for one low price, you can quickly and efficiently
take high quality, color video of a potential customer's air
ducts and use the footage as a powerful sales tool.
Here's all the features:
All in one package: camera, screen and video recorder
Camera is smaller - go places you couldn't go before.
Only 1" in diameter.
Includes optional 3" Diameter "teardrop" camera housing
fixture for large diameter ducts
Large 10" screen for real-time full color picture
65 foot insertion cable
Camera features 12 bright white LEDs
Record the digital video to a USB Flash Drive
Battery operated - no more cords! (AC Power is included
as well)
Remote control for easy operation
Show the video on a larger TV or monitor
Water proof camera and cable
Attaches to cleaning hose/cable
VIDEO BORESCOPE/INSPECTION CAMERA WITH LIVE
RECORDING
The Air-Care Heat Exchanger Inspection Camera has all the
features you need to properly inspect a furnace or air handler for dirt,
dust, mold, cracks and other potential problems. The full color
screen and recording capability allow you to show your customers
the dirt and damage so they can see first hand the work that needs
to be done.
CAMERA FEATURES
Super long gooseneck camera - 39 inches
Small 3/8" diameter camera
Snap a picture or record a video
Up to 7 hours of battery life
Record video to SD card for later playback*
USB port for connecting to computer
Connects to external monitor or TV
Hook, mirror and magnet accessories included to retrieve lost/dropped items
Carrying case for easy transport and storage
4x zoom and increase/decrease LED light brightness
Includes 4 AA batteries
*SD card not included
8
4- MAX II DUAL TANK FOGGER
Cleaning the interior of an air system is half the job. For a thorough job, the system
should be decontaminated by fogging it with an EPA registered sanitizer and sealant,
to retard biological growth and prevent any residual debris from migrating into the
occupied area.
Our all new Dual Tank Fogger has a six foot long hose, for dispensing from two
separate one gallon tanks.
Adjustable Flow Nozzle 0-.115 GPM, 5-50
Microns
Chemically-resistant Viton seals
Eliminates the need for multiple foggers
Fewer trips up and down ladders
Quickly switch between solutions as
needed.
Spending less time refilling
Superior performance with a larger variety of chemicals
Provides a well controlled cold mist from a stable low-slung, self-contained case with
a plastic handle to provide ease of operation and electrical isolation. The Air-Care
Dual Tank Fogger will disperse Odor Kill, and Soot Set to decontaminate residential
and commercial air systems.
Features: ULV - Ultra Low Volume
(2) One-Gallon Tanks.
Lock-In-Place Nozzle Head
Holds Settings when machine is shut off.
2 Spring-loaded valves, which only dispense product when depressed.
Instant shut off when Valve is released. Only Fogger on the market that will not leak
when turned off, without requiring the nozzle to be turned off.
Motor Failure Safeguard (Secondary Check Valves to prevent backflow)
800 Watt High performance Motor
Large, easy to fill reservoirs
Stable base - Won't tip
Shoulder Strap
6' Hose
120V and 220V versions
Rotationally Molded Poly tanks and Motor Cover
Convenient handle allowing for balance with small or large amount of liquid in tank
Secure Storage Bracket for Nozzle Head
Power switch atop main housing.
Hose storage bracket.
Lighter than two separate foggers.
Can be private labeled.
Fog two different solutions from the same fogger.
Spray two different solutions at the same time.
9
5- Whip System
Cleans Ducts with Compressed Air Blasted through Rods to Create a
“Whipping” Action
The unique DUCT-PRO Power Rod System from Abatement Technologies®is a
versatile agitation device and compressed air tool used to remove caked-on dirt and
debris from air duct systems. The Power Rod System blasts compressed air through
flexible rods to create a “whipping” action that scrubs every square inch of the
ductwork in a variety of duct types and configurations.
The DUCT-PRO Power Rod System is included in Package
A, Package B and Package C of our turnkey packages of air
duct cleaning equipment and can also be purchased
separately. Click to learn more about our fully assembled
packages.
Features of the DUCT-PRO Power Rod System
include:
Compressed air constantly blasted through rods causes a
“whipping” action over every square inch of the duct
Three different rod flexibilities provide almost unlimited
options for cleaning all configurations and types of ductwork
Flexible rods can be directed where needed and can be used
for long runs–even runs over 100 feet!
Forward and reverse nozzles deliver air blasts where
conventional Aire-Sweeps cannot reach
Fittings and nozzles are made of solid brass for durability
Rods, nozzles and whip heads are easily and securely
connected by quick connects
All nozzles and heads fit through 1” access holes
The Power Rod System will save contractors time and frustration–and increase
profits.
The DUCT-PRO Power Rod System includes:
3 ea. 5‟ low-flex power rods
3 ea. 5‟ medium-flex power rods
3 ea. 5‟ high-flex power rods
Sturdy rod case
Forward and reverse nozzles
Single-whip power rod head
Three-whip power rod head
Eight-whip power rod head
6‟ air line with hand control valve
10
2 HP PORTABLE AIR COMPRESSOR
This 230 volt compressor is the perfect companion for the Forward and Reverse Air
Whisk since it plugs into a standard 15 amp electrical outlet. Provides 125 P.S.I. at 6
CFM. It does not provide sufficient pressure or flow for the Sidewinder, but will work
well for cleaning coils, blowers etc. and using the power air nozzle. 6 CFM, 230 volt
50 hertz
2HP 150 LITRE o 150 LITRE TANK INDUSTRIAL COMPRESSOR
o PRESSURE 9 BAR MAX
o MOTOR 2HP SINGLE PHASE 230 VOLT 50HZ
o BELT DRIVEN WITH METAL GUARD
o AIR DISPLACEMENT 360 Lit/Min 11.6 CFM
o START SYSTEM PULL SWITCH
o 1 YEAR WARRANTY
o MADE IN ITALY
11
Air Ducts Cleaning Accessories
1- FORWARD AND REVERSE AIR WHISK
The Air Whisk system provides the same versatile cleaning of
all types of ducts as the Sidewinder, but is limited to 20‟
sections or less. A 20‟ stiff hose is used for insertion into the
duct to be cleaned. The Air Whisk comes with a Forward and
a Reverse duct ball for additional versatility. It requires a
minimum 2 H.P. 125 P.S.I., 6 CFM compressor, but will also
work with 175 PSI high performance compressors.
2- SIDEWINDER DUCT HOSE ASSEMBLY
The Sidewinder is the most versatile cleaning tool for all sizes of ducts made of metal, flex, duct board, and even internally insulated types. It effectively dislodges debris and air scrubs the interior surfaces of any duct system. Two asymmetrical hole pattern balls were specially designed by Air-Care for the Sidewinder. Both designs provide effective cleaning of the top, sides and bottom of duct interiors and provide thrust to propel the Sidewinder deep into the duct and make operator controlled turns. The Sidewinder ball for metal ducts has a more aggressive action, while the soft-lining ball has an air-jet pattern that is less aggressive with increased air-washing action. Both metal and soft lining Sidewinder balls are included with the assembly. The Sidewinder requires a 2-stage compressor capable of 175 PSI at 14-25 CFM.
3- POGO POLE HOSE ADAPTER
The Pogo Pole hose adapter is the quickest way to attach an Air-Care Turbojet or other brand negative air machine to a ceiling or wall duct. The 20" x 20" molded poly adapter plate has a 2" foam seal that will protect delicate walls and ceiling during cleaning. The pole is spring-loaded and has adjustable height to provide gentle, yet firm, pressure on most ceilings or wall connections and will often work well on acoustic drop ceiling vents. The durable molded poly adapter plate has a 4” access plug for Cobra brush air tools. for Cobra brush, BrushMaster or air tools. This tool will save valuable time making the duct connection and is easily moved to a new location in less than a minute. The Pogo Pole is adjustable for 5.5 to 12 foot ceilings and the plate swivels 45 degrees in both directions for placing it on high mounted wall duct openings. The bottom of the pole has an anti-slip protective rubber foot for tile and vinyl floors. The Pogo Pole hose adapter has a 12” collar that mates with the 12” Light Duty Mylar hose assembly.
12
VARIOUS HOSES
12" LIGHT DUTY MYLAR HOSE ASSEMBLY 12" light duty Mylar hose is clear vacuum hose with
steel wire reinforcement. Includes: 12" x 12 ½„ hoses
(2), hose clamps (4), hose coupler (1)
AIR HOSE
50‟ of 3/8” dia. high visibility PVC non-scuff hose with quick connectors. This heavy
duty hose is rated at 300 PSI working pressure. The
Sidewinder and other air-powered devices can be operated
several hundred feet from the compressor. Long lengths of
hose will act like auxiliary air storage and do not generally
impair equipment performance. Includes (1) male & (1)
female quick disconnect fittings. Item# CE1507
Foam & Brush's
13
Air Dryer Ducts Cleaning Kit
This kit is perfect if you already have a truck-mount vacuum or
similar vacuum necessary to pull lint and other debris from a dryer
duct. It includes everything you need to do residential dryer duct
cleaning except for the vacuum.
Hole Cutter - Drill Powered
To properly clean some duct systems it may be
necessary to “cut-in” to attach a negative air
machine or to access areas for contact
vacuuming. Air-Care offers 3 hole cutters that
will work in 18 gauge or lighter steel.
14
Chemicals
1- EnviroCon: is a Bacteriostat, Fungistat and
Deodorizer. This product is EPA-registered
for use in HVAC systems. EnviroCon is
highly-effective in eliminating odor-causing
microorganisms as well as those associated
with mold, mildew and bacterial growth. An
enhanced benefit of EnviroCon is its low
toxicity and safety rating from the EPA. As a
result, EnviroCon may be used in occupied
spaces. It does not use any environmentally
damaging propellants or flammable
ingredients.
2- Soot set: is a non-toxic and non-flammable formulation developed as an air duct
adhesive based on the shrink properties of a unique water-soluble polymer. A new
type of fire inhibiting agent, containing aluminum, has been coupled to the polymer
molecule to provide the safest to use material possible. The product is dispersed by
fine fog aerosol into air ducts after source removal. The dried, residual lining in all of
the ducts resists blow out of material impossible to remove during the source removal
step. Soot Set can be diluted at 1 part Soot Set to 9 parts water for heavy soiling, or
1:19 with water for light soiling making it very cost effective.
3- Odor Kill: This product is a high performance concentrate material, especially
formulated to deal with problem odors. Odor Kill can be saturated into any porous
material, natural or synthetic, and evaporated into odorous air to cause air-freshening
effects. If evaporated, the total effect is lending a fresh fragrance to stale air, and
killing lingering odors. For general odor removal, dilute 1 part Odor Kill with 3 parts
water. This product has a light fresh scent.
4- Dynamite: Heavy-duty super strength concentrate cleaner, specifically designed for
cleaning vents, registers and air ducts. This product will work very effectively on all
washable surfaces. One gallon of Dynamite concentrate will make 10 gallons of ready
to use product.
15
Filters