Line Card California Title 24 2013 Non-Residential Code Compliance

Smart Single Source for 2018 IECC Standard Compliance

Line Card2018 IECC Standard Compliance

Partial Summary of Lighting Control Requirements for 2018 IECC Compliance ■ Occupancy/Vacancy Sensors: automatically turn lights OFF when a space is unoccupied or vacated ■ Time Switch Control: automatically switches lights ON/OFF based on time of day ■ Manual Controls: requires visible and accessible manual controls for lighting in the space ■ Partial-OFF: automatically reduce lighting by at least 50% when space is vacated - 80% for open offices with additional

requirements ■ Daylight Zone Control: automatically adjusts electric light levels based on the amount of daylight in the space ■ Outdoor Lighting Controls: automatically adjust light level with time switches or scheduling ■ Functional Testing: required project review and testing by a third party

Smart Code and Control Solutions Sensing Control• Broadest range of sensors for any application• Provolt integrates occupancy/vacancy sensing, daylight harvesting, and

manual-ON/auto-OFF override control in a single unit—no special control stations required

• Plug load control with OPP20 Super Duty Power Pack• 24V AC/DC input for integration with HVAC/BAS systems• Industry-leading layout and application services

Provolt™ Room Controller (PRC)• Requires only two devices to be installed for high performance lighting

controls—0-10V dimming, occupancy/vacancy sensing, partial-ON, partial-OFF, daylight harvesting and demand response

• Perform all testing, configuration and control from a smart device or tablet via the Provolt App

• Features customizable room templates for fast multi-room replication Integrated Room Control (IRC)• Combines 0-10V dimming, occupancy/vacancy sensing, partial-ON, partial-OFF,

daylight harvesting and demand response capabilities in a stand-alone package• Kitted with sensor, photocell, and 4-button switch• Autocal™ automatic photocell calibration and Ladderless Commissioning™• Easy automatic closed or open loop multi-zone daylight harvesting control• Auto 100 hour burn-in Lumina™ Gateway Eco-System• Uses the Lumina Gateway as an energy management coordinator• Automated control of loads from a tablet or smartphone via the Lumina App Lumina™ RF Standalone Room Controller System for Use with Zigbee-Enabled Lamps and Fixtures• Convert to LED multi-zone controls with wireless controls and Zigbee-enabled

lamps• Multi-zone control, full range dimming, scene setting and manual control• Programmable via any Bluetooth-enabled Android or iOS smart device using the

Lumina RF Standalone App• Listed on the DesignLights Consortium (DLC) Qualified Products List (QPL) for

Networked Lighting Control systems

Intellect™ Intelligent Linear Control System• Code-compliant lighting controls within a fixture• Easy system installation in just two steps with no expensive wiring or

commissioning required• Configure, monitor and control a space from an Android or iOS smart

device via the Neuron Bluetooth® Mobile App• Listed on the DesignLights Consortium (DLC) Qualified Products List (QPL)

for Networked Lighting Control systems

Dimensions® D4000 • Offers both stand alone and integrated room dimming and control• LED compatible with power extender• Complete multi-event scheduler and integrated astronomical time clock

20

18

IEC

C S

tand

ard

Com

plia

nce

Smart Code and Control Solutions Smart Code and Control Solutions Sapphire™ Touch Screen Room Controller• Delivers single control interface for lighting and AV control• Provides 7-day rotating schedule, holiday exception calendar, special events

calendar and astronomical clock• Color tuning for circadian rhythms GreenMAX® Digital Room Control (DRC) System• Fully distributed room control system, with each room operating independently of

others• Fully configurable via the GreenMAX DRC App for Android or iOS smart devices• Listed on the DesignLights Consortium (DLC) Qualified Products List for Networked

Lighting Control systems (certification pending)

EZ-MAX® Plus Standalone Relay System• Centralized building lighting control and daylight harvesting in a contractor-friendly,

quick to install, simple to configure compact enclosure• Low voltage inputs allow connection of photocells, occupancy sensors, low-voltage

switches, and digital switches for a comprehensive yet easily installed energy management solution

• Built-in astronomical time clock and scheduler • Auto-detection and auto-assign of installed network switches

GreenMAX® Relay Control System• Integrates common sensing, dimming, switching, and advanced daylight harvesting

applications from the same cabinet• BACnet IP native in each cabinet for seamless BMS integration• Industry leading 25,000A Short Circuit Current Rating (SCCR) at 277V• Integrated 0-10V dimming/switching relay• Built-in override switch allows manual control of each load individually• Programming is done with preset “Behaviors” via the Handheld

Display Unit (HDU)

NorthStar™ Outdoor Controls• Wireless system with a self-healing mesh network• Suitable for switching and 0-10V dimming load types• Controlled by either a simple time clock, dusk-to-dawn photocell control or via

customized control sequences• Commission through the NorthStar Site Controller using any web browser and the

Controller’s wifi access point• Use the Leviton Provisioning App to identify and locate the fixture modules

Marked “Controlled” Receptacles• Meets requirements for identifying receptacles that will automatically be

de-energized as part of an overall plug load control program• 2014 and 2017 NEC requires all 15A and 20A, 125V receptacles that are

automatically controlled to be marked with a specific symbol ( )

20

18

IEC

C S

tand

ard

Com

plia

nce

G-9139B/I14-cdsREV SEP 2014

Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation20497 SW Teton Avenue, Tualatin, OR 97062 tel 800-736-6682 fax 503-404-5594 tech line 800-954-6004 iecc portal iecc.leviton.com© 2019 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice. G-10544/D19 -aa

NOTE: Solutions may require other products to complete a code compliant energy control solution—consult Leviton for more information.

2018 IECC Standards

C405.2.1 Occupancy Sensors

C405.2.2.1 Automatic Time Switch Controls

C405.2.2.2 Interior Manual Lighting Controls

C405.2.2.2 Light Reduction Controls

C405.2.3.1 Daylight Zone Controls

C405.2.4 Specific Application Controls

C405.2.6 Exterior Lighting Controls

C408.3 Functional Testing

Product Solutions

Occupancy Sensors

All Leviton solutions are manufactured to the highest quality and performance standards, which can be easily demonstrated at the time of installation to fulfill 2018 IECC Section C408.3.

Vacancy Sensors

Wall Switch Sensors

Wall Switch Dimmers

Photocells

Provolt™ Room Controller(PRC)

Integrated Room Controller (IRC)

Lumina™ Gateway

Lumina™ RF Standalone Room Controls

Intellect™

GreenMAX®

DRC Room Control System

EZ-MAX®

Plus

GreenMAX®

Dimensions®

D4000

Sapphire® Touchscreen Room Controller

NorthStar™ Outdoor Controls

ReceptacleControlSolutions